-// GEOM GEOMGUI : GUI for Geometry component
+// Copyright (C) 2007-2022 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-// File : RepairGUI_RemoveHolesDlg.cxx
-// Author : Lucien PIGNOLONI
-// Module : GEOM
-// $Header$
+// GEOM GEOMGUI : GUI for Geometry component
+// File : RepairGUI_RemoveHolesDlg.cxx
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+//
#include "RepairGUI_RemoveHolesDlg.h"
-#include "SalomeApp_Application.h"
-#include "LightApp_SelectionMgr.h"
-#include "SUIT_MessageBox.h"
-#include "SUIT_Session.h"
+#include "DlgRef.h"
+#include "GeometryGUI.h"
+#include "GEOMBase.h"
+#include "RepairGUI.h"
-#include "SALOME_ListIteratorOfListIO.hxx"
-
-#include "GEOMImpl_Types.hxx"
+#include <SUIT_Session.h>
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_MessageBox.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
+// OCCT Includes
#include <TopAbs.hxx>
#include <TColStd_MapOfInteger.hxx>
+#include <TColStd_IndexedMapOfInteger.hxx>
-using namespace std;
+#include <GEOMImpl_Types.hxx>
//=================================================================================
// class : RepairGUI_RemoveHolesDlg()
// The dialog will by default be modeless, unless you set 'modal' to
// TRUE to construct a modal dialog.
//=================================================================================
-RepairGUI_RemoveHolesDlg::RepairGUI_RemoveHolesDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
- const char* name, bool modal, WFlags fl)
- :GEOMBase_Skeleton(theGeometryGUI, parent, name, modal, WStyle_Customize |
- WStyle_NormalBorder | WStyle_Title | WStyle_SysMenu)
+RepairGUI_RemoveHolesDlg::RepairGUI_RemoveHolesDlg (GeometryGUI* theGeometryGUI, QWidget* parent,
+ bool modal)
+ : GEOMBase_Skeleton(theGeometryGUI, parent, modal)
{
- QPixmap image0(SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM",tr("ICON_DLG_SUPPRESS_HOLES")));
- QPixmap image1(SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM",tr("ICON_SELECT")));
+ QPixmap image0 (SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM", tr("ICON_DLG_SUPPRESS_HOLES")));
+ QPixmap image1 (SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM", tr("ICON_SELECT")));
- setCaption(tr("GEOM_REMOVE_HOLES_TITLE"));
+ setWindowTitle(tr("GEOM_REMOVE_HOLES_TITLE"));
/***************************************************************/
- GroupConstructors->setTitle(tr("GEOM_REMOVE_HOLES_TITLE"));
- RadioButton1->setPixmap(image0);
- RadioButton2->close(TRUE);
- RadioButton3->close(TRUE);
-
- GroupPoints = new DlgRef_1Sel_Ext(this, "GroupPoints");
+ mainFrame()->GroupConstructors->setTitle(tr("GEOM_REMOVE_HOLES_TITLE"));
+ mainFrame()->RadioButton1->setIcon(image0);
+ mainFrame()->RadioButton2->setAttribute(Qt::WA_DeleteOnClose);
+ mainFrame()->RadioButton2->close();
+ mainFrame()->RadioButton3->setAttribute(Qt::WA_DeleteOnClose);
+ mainFrame()->RadioButton3->close();
+
+ GroupPoints = new DlgRef_1Sel1Check1Sel(centralWidget());
GroupPoints->GroupBox1->setTitle(tr("GEOM_HOLES"));
GroupPoints->TextLabel1->setText(tr("GEOM_SELECTED_SHAPE"));
- GroupPoints->PushButton1->setPixmap(image1);
- GroupPoints->LineEdit1->setReadOnly( true );
-
- Layout1->addWidget(GroupPoints, 2, 0);
-
- myAllChk = new QCheckBox( tr( "GEOM_REMOVE_ALL_HOLES" ), GroupPoints->GroupBox1 );
-
- QGridLayout* aSelectWiresLay = new QGridLayout( 0, 1, 1, 0, 6, "aSelectWiresLay");
-
- mySelectWiresBtn = new QPushButton( GroupPoints->GroupBox1, "mySelectWiresBtn" );
- mySelectWiresBtn->setSizePolicy( QSizePolicy( (QSizePolicy::SizeType)0, (QSizePolicy::SizeType)0, 0, 0, mySelectWiresBtn->sizePolicy().hasHeightForWidth() ) );
- mySelectWiresBtn->setText( trUtf8( "" ) );
- mySelectWiresBtn->setPixmap(image1);
-
- mySelectWiresEdt = new QLineEdit( GroupPoints->GroupBox1, "mySelectWiresEdt" );
- mySelectWiresEdt->setReadOnly( true );
-
- mySelectWiresLbl = new QLabel( tr( "GEOM_WIRES_TO_REMOVE" ), GroupPoints->GroupBox1, "TextLabel1" );
- mySelectWiresLbl->setSizePolicy( QSizePolicy( (QSizePolicy::SizeType)0, (QSizePolicy::SizeType)0, 0, 0, mySelectWiresLbl->sizePolicy().hasHeightForWidth() ) );
-
- aSelectWiresLay->addWidget( mySelectWiresLbl, 0, 0 );
- aSelectWiresLay->addWidget( mySelectWiresBtn, 0, 1 );
- aSelectWiresLay->addWidget( mySelectWiresEdt, 0, 2 );
- QSpacerItem* spacer = new QSpacerItem( 0, 16, QSizePolicy::Minimum, QSizePolicy::Expanding );
- aSelectWiresLay->addItem( spacer, 1, 2 );
-
- QGridLayout* aDetectLay = new QGridLayout( 0, 1, 1, 0, 6, "aDetectLay" );
- myFreeBoundBtn = new QPushButton( tr( "GEOM_DETECT" ), GroupPoints->GroupBox1 );
- QLabel* aLbl = new QLabel( tr( "GEOM_FREE_BOUNDARIES" ), GroupPoints->GroupBox1 );
- aDetectLay->addWidget( aLbl, 0, 0 );
- aDetectLay->addWidget( myFreeBoundBtn, 0, 1 );
-
- GroupPoints->getGroupBoxLayout()->addMultiCellWidget( myAllChk, 1, 1, 0, 2 );
- GroupPoints->getGroupBoxLayout()->addLayout( aSelectWiresLay, 2, 0 );
- GroupPoints->getGroupBoxLayout()->addLayout( aDetectLay, 3, 0 );
+ GroupPoints->PushButton1->setIcon(image1);
+ GroupPoints->LineEdit1->setReadOnly(true);
+ GroupPoints->CheckButton1->setText(tr("GEOM_REMOVE_ALL_HOLES"));
+ GroupPoints->TextLabel2->setText(tr("GEOM_WIRES_TO_REMOVE"));
+ GroupPoints->PushButton2->setIcon(image1);
+ GroupPoints->LineEdit2->setReadOnly(true);
+
+ myFreeBoundBtn = new QPushButton(tr("GEOM_DETECT") + QString(" [%1]").arg(tr("GEOM_FREE_BOUNDARIES")),
+ GroupPoints->Box);
+ QVBoxLayout* l = new QVBoxLayout(GroupPoints->Box);
+ l->setMargin(0); l->setSpacing(0);
+ l->addWidget(myFreeBoundBtn);
+
+ QVBoxLayout* layout = new QVBoxLayout(centralWidget());
+ layout->setMargin(0); layout->setSpacing(6);
+ layout->addWidget(GroupPoints);
/***************************************************************/
setHelpFileName("suppress_holes_operation_page.html");
Init();
}
-
//=================================================================================
// function : ~RepairGUI_RemoveHolesDlg()
// purpose : Destroys the object and frees any allocated resources
{
}
-
//=================================================================================
// function : Init()
// purpose :
//=================================================================================
void RepairGUI_RemoveHolesDlg::Init()
{
- /* init variables */
- myEditCurrentArgument = GroupPoints->LineEdit1;
-
+ // init variables
+ GroupPoints->LineEdit1->clear();
+ GroupPoints->LineEdit2->clear();
myObject = GEOM::GEOM_Object::_nil();
myWiresInd = new GEOM::short_array();
- myWiresInd->length( 0 );
-
- //myGeomGUI->SetState( 0 );
- initSelection();
+ myWiresInd->length(0);
myClosed = -1;
myOpen = -1;
-
- /* signals and slots connections */
- connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
- connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(GroupPoints->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupPoints->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(mySelectWiresBtn, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(mySelectWiresEdt, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
+ // signals and slots connections
+ connect(buttonOk(), SIGNAL(clicked()), this, SLOT(ClickOnOk()));
+ connect(buttonApply(), SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(),
- SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
+ connect(GroupPoints->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
+ connect(GroupPoints->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect( myAllChk, SIGNAL( clicked() ), this, SLOT( onRemoveAllClicked() ) );
- connect( myFreeBoundBtn, SIGNAL(clicked()), this, SLOT(onDetect()) );
+ connect(GroupPoints->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
+ connect(GroupPoints->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- initName( tr( "REMOVE_HOLES_NEW_OBJ_NAME" ) );
-}
+ connect(GroupPoints->CheckButton1, SIGNAL(clicked()), this, SLOT(onRemoveAllClicked()));
+
+ connect(myFreeBoundBtn, SIGNAL(clicked()), this, SLOT(onDetect()));
+ initName(tr("REMOVE_HOLES_NEW_OBJ_NAME"));
+
+ GroupPoints->PushButton1->click();
+ SelectionIntoArgument();
+ resize(100,100);
+}
//=================================================================================
// function : ClickOnOk()
//=================================================================================
void RepairGUI_RemoveHolesDlg::ClickOnOk()
{
- if ( ClickOnApply() )
+ setIsApplyAndClose( true );
+ if (ClickOnApply())
ClickOnCancel();
}
//=================================================================================
bool RepairGUI_RemoveHolesDlg::ClickOnApply()
{
- if ( !onAccept() )
+ if (!onAccept())
return false;
initName();
-
- myEditCurrentArgument = GroupPoints->LineEdit1;
- myEditCurrentArgument->setText("");
- mySelectWiresEdt->setText("");
- myObject = GEOM::GEOM_Object::_nil();
- myWiresInd->length( 0 );
-
- initSelection();
-
+ // activate first line edit
+ GroupPoints->PushButton1->click();
return true;
}
-
//=================================================================================
// function : SelectionIntoArgument()
-// purpose : Called when selection
+// purpose : Called when selection is changed or on dialog initialization or activation
//=================================================================================
void RepairGUI_RemoveHolesDlg::SelectionIntoArgument()
{
erasePreview();
myEditCurrentArgument->setText("");
- if ( myEditCurrentArgument == GroupPoints->LineEdit1 ) myObject = GEOM::GEOM_Object::_nil();
- else if ( myEditCurrentArgument == mySelectWiresEdt ) myWiresInd->length( 0 );
-
- if ( IObjectCount() == 1 )
- {
- Handle(SALOME_InteractiveObject) anIO = firstIObject();
-
- if ( myEditCurrentArgument == GroupPoints->LineEdit1 ) // face selection
- {
- Standard_Boolean aRes;
- myObject = GEOMBase::ConvertIOinGEOMObject( anIO, aRes );
- if ( aRes && GEOMBase::IsShape( myObject ) )
- myEditCurrentArgument->setText( GEOMBase::GetName( myObject ) );
+ // the second argument depends on the first one
+ GroupPoints->LineEdit2->setText("");
+ myWiresInd->length(0);
+
+ if (myEditCurrentArgument == GroupPoints->LineEdit1)
+ myObject = GEOM::GEOM_Object::_nil();
+
+ LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
+ SALOME_ListIO aSelList;
+ aSelMgr->selectedObjects(aSelList);
+
+ if (aSelList.Extent() == 1) {
+ Handle(SALOME_InteractiveObject) anIO = aSelList.First();
+
+ if (myEditCurrentArgument == GroupPoints->LineEdit1) { // face selection
+ myObject = GEOMBase::ConvertIOinGEOMObject( anIO );
+ if ( GEOMBase::IsShape(myObject) ) {
+ myEditCurrentArgument->setText(GEOMBase::GetName(myObject));
+
+ // clear selection
+ disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
+ myGeomGUI->getApp()->selectionMgr()->clearSelected();
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
+
+ if (!GroupPoints->CheckButton1->isChecked())
+ GroupPoints->PushButton2->click();
+ }
else
myObject = GEOM::GEOM_Object::_nil();
}
- else if ( myEditCurrentArgument == mySelectWiresEdt && !myAllChk->isChecked() )
- {
+ else if (myEditCurrentArgument == GroupPoints->LineEdit2 &&
+ !GroupPoints->CheckButton1->isChecked()) {
TColStd_IndexedMapOfInteger aMap;
- ((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr()->GetIndexes( anIO, aMap );
+ aSelMgr->GetIndexes(anIO, aMap);
const int n = aMap.Extent();
- myWiresInd->length( n );
- for ( int i = 1; i <= n; i++ )
- myWiresInd[i-1] = aMap( i );
- if ( n )
- myEditCurrentArgument->setText( QString::number( n ) + "_" + tr( "GEOM_WIRE" ) + tr( "_S_" ) );
+ myWiresInd->length(n);
+ for (int i = 1; i <= n; i++)
+ myWiresInd[i-1] = aMap(i);
+ if (n)
+ myEditCurrentArgument->setText(QString::number(n) + "_" + tr("GEOM_WIRE") + tr("_S_"));
}
}
}
//=================================================================================
void RepairGUI_RemoveHolesDlg::SetEditCurrentArgument()
{
- const QObject* send = sender();
- if ( send == GroupPoints->PushButton1 )
- myEditCurrentArgument = GroupPoints->LineEdit1;
- else if ( send == mySelectWiresBtn && !myObject->_is_nil() )
- myEditCurrentArgument = mySelectWiresEdt;
- if ( myEditCurrentArgument )
- {
+ QPushButton* send = (QPushButton*)sender();
+
+ bool isEffective = false;
+
+ if (send == GroupPoints->PushButton1) {
+ isEffective = true;
+ myEditCurrentArgument = GroupPoints->LineEdit1;
+
+ GroupPoints->PushButton2->setDown(false);
+ GroupPoints->LineEdit2->setEnabled(false);
+ }
+ else if (send == GroupPoints->PushButton2 && !myObject->_is_nil()) {
+ isEffective = true;
+ myEditCurrentArgument = GroupPoints->LineEdit2;
+
+ GroupPoints->PushButton1->setDown(false);
+ GroupPoints->LineEdit1->setEnabled(false);
+ }
+
+ if (isEffective) {
initSelection();
+
+ // enable line edit
+ myEditCurrentArgument->setEnabled(true);
myEditCurrentArgument->setFocus();
- SelectionIntoArgument();
+ // after setFocus(), because it will be setDown(false) when loses focus
+ send->setDown(true);
}
}
-
//=================================================================================
// function : LineEditReturnPressed()
// purpose :
void RepairGUI_RemoveHolesDlg::LineEditReturnPressed()
{
const QObject* send = sender();
- if( send == GroupPoints->LineEdit1 || send == mySelectWiresEdt )
- {
+ if (send == GroupPoints->LineEdit1 || send == GroupPoints->LineEdit2) {
myEditCurrentArgument = (QLineEdit*)send;
GEOMBase_Skeleton::LineEditReturnPressed();
}
}
-
//=================================================================================
// function : ActivateThisDialog()
// purpose :
void RepairGUI_RemoveHolesDlg::ActivateThisDialog()
{
GEOMBase_Skeleton::ActivateThisDialog();
- connect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(),
- SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
+ connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
+ this, SLOT( SelectionIntoArgument() ) );
myEditCurrentArgument = GroupPoints->LineEdit1;
- myEditCurrentArgument->setText("");
- mySelectWiresEdt->setText("");
+ myEditCurrentArgument->setText( "" );
+ GroupPoints->LineEdit2->setText( "" );
myObject = GEOM::GEOM_Object::_nil();
myWiresInd->length( 0 );
myClosed = -1;
myOpen = -1;
- //myGeomGUI->SetState( 0 );
initSelection();
}
-
//=================================================================================
// function : enterEvent()
// purpose : Mouse enter onto the dialog to activate it
//=================================================================================
-void RepairGUI_RemoveHolesDlg::enterEvent(QEvent* e)
+void RepairGUI_RemoveHolesDlg::enterEvent (QEvent*)
{
- if ( !GroupConstructors->isEnabled() )
+ if (!mainFrame()->GroupConstructors->isEnabled())
ActivateThisDialog();
}
-
-//=================================================================================
-// function : closeEvent()
-// purpose :
-//=================================================================================
-void RepairGUI_RemoveHolesDlg::closeEvent(QCloseEvent* e)
-{
- //myGeomGUI->SetState( -1 );
- GEOMBase_Skeleton::closeEvent( e );
-}
-
//=================================================================================
// function : createOperation
// purpose :
//=================================================================================
GEOM::GEOM_IOperations_ptr RepairGUI_RemoveHolesDlg::createOperation()
{
- return getGeomEngine()->GetIHealingOperations( getStudyId() );
+ return getGeomEngine()->GetIHealingOperations();
}
//=================================================================================
// function : isValid
// purpose :
//=================================================================================
-bool RepairGUI_RemoveHolesDlg::isValid( QString& msg )
+bool RepairGUI_RemoveHolesDlg::isValid (QString&)
{
myClosed = -1;
- return !myObject->_is_nil() && ( IsPreview() || myAllChk->isChecked() || myWiresInd->length() );
+ return !myObject->_is_nil() && (IsPreview() || GroupPoints->CheckButton1->isChecked() || myWiresInd->length());
}
//=================================================================================
// function : execute
// purpose :
//=================================================================================
-bool RepairGUI_RemoveHolesDlg::execute( ObjectList& objects )
+bool RepairGUI_RemoveHolesDlg::execute (ObjectList& objects)
{
bool aResult = false;
- if ( IsPreview() ) // called from onDetect(): detect free boundary edges, highlight them (add to objects), display message dialog
- {
+
+ if (IsPreview()) {
+ // called from onDetect(): detect free boundary edges,
+ // highlight them (add to objects), display message dialog
GEOM::ListOfGO_var aClosed, anOpen;
- aResult = GEOM::GEOM_IHealingOperations::_narrow( getOperation() )->GetFreeBoundary( myObject, aClosed, anOpen );
+ GEOM::ListOfGO_var objList = new GEOM::ListOfGO;
+ objList->length(1);
+ objList[0] = myObject;
+ GEOM::GEOM_IHealingOperations_var anOper = GEOM::GEOM_IHealingOperations::_narrow(getOperation());
+ aResult = anOper->GetFreeBoundary(objList, aClosed, anOpen);
- if ( aResult )
- {
+ if (aResult) {
myClosed = aClosed->length();
myOpen = anOpen->length();
int i;
- for ( i = 0; i < myClosed; i++ )
- objects.push_back( aClosed[i]._retn() );
- for ( i = 0; i < myOpen; i++ )
- objects.push_back( anOpen[i]._retn() );
+ for (i = 0; i < myClosed; i++)
+ objects.push_back(aClosed[i]._retn());
+ for (i = 0; i < myOpen; i++)
+ objects.push_back(anOpen[i]._retn());
}
else
myClosed = -1;
}
- else
- {
- GEOM::GEOM_Object_var anObj = GEOM::GEOM_IHealingOperations::_narrow( getOperation() )->FillHoles( myObject, myWiresInd );
+ else {
+ GEOM::GEOM_IHealingOperations_var anOper = GEOM::GEOM_IHealingOperations::_narrow(getOperation());
+ GEOM::GEOM_Object_var anObj = anOper->FillHoles(myObject, myWiresInd);
aResult = !anObj->_is_nil();
- if ( aResult )
- objects.push_back( anObj._retn() );
+ if (aResult)
+ {
+ if ( !IsPreview() )
+ RepairGUI::ShowStatistics( anOper, this );
+ objects.push_back(anObj._retn());
+ }
}
-
+
return aResult;
}
//=================================================================================
void RepairGUI_RemoveHolesDlg::onRemoveAllClicked()
{
- bool b = myAllChk->isOn();
- mySelectWiresLbl->setEnabled( !b );
- mySelectWiresBtn->setEnabled( !b );
- mySelectWiresEdt->setEnabled( !b );
- if ( b )
- {
- mySelectWiresEdt->setText( "" );
- myWiresInd->length( 0 );
+ bool b = GroupPoints->CheckButton1->isChecked();
+ GroupPoints->TextLabel2->setEnabled(!b);
+ GroupPoints->PushButton2->setEnabled(!b);
+ GroupPoints->LineEdit2->setEnabled(!b);
+ if (b) {
+ GroupPoints->LineEdit2->setText("");
+ myWiresInd->length(0);
}
}
//=================================================================================
void RepairGUI_RemoveHolesDlg::initSelection()
{
- if ( myEditCurrentArgument == GroupPoints->LineEdit1 )
- {
+ disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
+
+ if (myEditCurrentArgument == GroupPoints->LineEdit1) {
TColStd_MapOfInteger aTypes;
- aTypes.Add( GEOM_COMPOUND );
- aTypes.Add( GEOM_SOLID );
- aTypes.Add( GEOM_SHELL );
- aTypes.Add( GEOM_FACE );
-
- globalSelection( aTypes );
+ aTypes.Add(GEOM_COMPOUND);
+ aTypes.Add(GEOM_SOLID);
+ aTypes.Add(GEOM_SHELL);
+ aTypes.Add(GEOM_FACE);
+
+ globalSelection(aTypes);
}
- else if ( myEditCurrentArgument == mySelectWiresEdt )
- {
- localSelection( myObject, TopAbs_EDGE );
- localSelection( myObject, TopAbs_WIRE );
+ else if (myEditCurrentArgument == GroupPoints->LineEdit2) {
+ localSelection(myObject, TopAbs_EDGE);
+ localSelection(myObject, TopAbs_WIRE);
}
-}
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
+}
//=================================================================================
// function : onDetect
//=================================================================================
void RepairGUI_RemoveHolesDlg::onDetect()
{
- displayPreview( false, true, true, 3 );
+ displayPreview(true, false, true, true, 3);
// field myClosed,myOpen is initialized in execute() method, called by displayPreview().
QString msg;
- if ( myClosed != -1 )
- msg = tr( "GEOM_FREE_BOUNDS_MSG" ).arg( myClosed + myOpen ).arg( myClosed ).arg( myOpen );
+ if (myClosed != -1)
+ msg = tr("GEOM_FREE_BOUNDS_MSG").arg(myClosed + myOpen).arg(myClosed).arg(myOpen);
else
- msg = tr( "GEOM_FREE_BOUNDS_ERROR" );
- SUIT_MessageBox::info1( this, tr( "GEOM_FREE_BOUNDS_TLT" ), msg, "Close" );
+ msg = tr("GEOM_FREE_BOUNDS_ERROR");
+ SUIT_MessageBox::information(this, tr("GEOM_FREE_BOUNDS_TLT"), msg);
}
+//=================================================================================
+// function : getSourceObjects
+// purpose : virtual method to get source objects
+//=================================================================================
+QList<GEOM::GeomObjPtr> RepairGUI_RemoveHolesDlg::getSourceObjects()
+{
+ QList<GEOM::GeomObjPtr> res;
+ GEOM::GeomObjPtr aGeomObjPtr(myObject);
+ res << aGeomObjPtr;
+ return res;
+}
