-// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
// GEOM RepairGUI : GUI for Geometry component
// File : RepairGUI_GlueDlg.cxx
-// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
-//
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+
#include "RepairGUI_GlueDlg.h"
#include <DlgRef.h>
#include <SalomeApp_DoubleSpinBox.h>
#include <SalomeApp_Application.h>
-#include <LightApp_SelectionMgr.h>
#include <SalomeApp_Study.h>
#include <SalomeApp_Tools.h>
+#include <LightApp_SelectionMgr.h>
#include <SUIT_Session.h>
#include <SUIT_Desktop.h>
#include <SUIT_MessageBox.h>
// The dialog will by default be modeless, unless you set 'modal' to
// TRUE to construct a modal dialog.
//=================================================================================
-RepairGUI_GlueDlg::RepairGUI_GlueDlg( GeometryGUI* theGeometryGUI, QWidget* parent,
- bool modal )
- : GEOMBase_Skeleton( theGeometryGUI, parent, modal ),
- myCurrConstrId( -1 )
+RepairGUI_GlueDlg::RepairGUI_GlueDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
+ bool modal, TopAbs_ShapeEnum theGlueMode)
+ : GEOMBase_Skeleton(theGeometryGUI, parent, modal),
+ myCurrConstrId(-1), myGlueMode(theGlueMode)
{
- QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_GLUE_FACES" ) ) );
- QPixmap image2( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_GLUE_FACES2" ) ));
- QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
-
- setWindowTitle( tr( "GEOM_GLUE_TITLE" ) );
+ QPixmap image0 (SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM", tr("ICON_SELECT")));
+ QPixmap image1 (SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM", tr("ICON_DLG_GLUE_FACES")));
+ QPixmap image2 (SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM", tr("ICON_DLG_GLUE_FACES2")));
+ QPixmap image3 (SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM", tr("ICON_DLG_GLUE_EDGES")));
+ QPixmap image4 (SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM", tr("ICON_DLG_GLUE_EDGES2")));
+
+ QString aTitle;
+ if (theGlueMode == TopAbs_FACE)
+ aTitle = tr("GEOM_GLUE_FACES_TITLE");
+ else if (theGlueMode == TopAbs_EDGE)
+ aTitle = tr("GEOM_GLUE_EDGES_TITLE");
+ setWindowTitle(aTitle);
/***************************************************************/
- mainFrame()->GroupConstructors->setTitle( tr( "GEOM_GLUE_TITLE" ) );
- mainFrame()->RadioButton1->setIcon( image0 );
- mainFrame()->RadioButton2->setIcon( image2 );
- mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+ mainFrame()->GroupConstructors->setTitle(aTitle);
+ if (theGlueMode == TopAbs_FACE) {
+ mainFrame()->RadioButton1->setIcon(image1);
+ mainFrame()->RadioButton2->setIcon(image2);
+ }
+ else if (theGlueMode == TopAbs_EDGE) {
+ mainFrame()->RadioButton1->setIcon(image3);
+ mainFrame()->RadioButton2->setIcon(image4);
+ }
+ mainFrame()->RadioButton3->setAttribute(Qt::WA_DeleteOnClose);
mainFrame()->RadioButton3->close();
- GroupPoints = new DlgRef_1SelExt( centralWidget() );
- GroupPoints->GroupBox1->setTitle( tr( "GEOM_GLUE" ) );
- GroupPoints->TextLabel1->setText( tr( "GEOM_SELECTED_SHAPE" ) );
- GroupPoints->PushButton1->setIcon( image1 );
- GroupPoints->LineEdit1->setReadOnly( true );
-
- QLabel* aTolLab = new QLabel( tr( "GEOM_TOLERANCE" ), GroupPoints->Box );
- myTolEdt = new SalomeApp_DoubleSpinBox( GroupPoints->Box );
- initSpinBox( myTolEdt, 0., 100., DEFAULT_TOLERANCE_VALUE, "len_tol_precision" );
- myTolEdt->setValue( DEFAULT_TOLERANCE_VALUE );
-
- QGridLayout* boxLayout = new QGridLayout( GroupPoints->Box );
- boxLayout->setMargin( 0 ); boxLayout->setSpacing( 6 );
- boxLayout->addWidget( aTolLab, 0, 0 );
- boxLayout->addWidget( myTolEdt, 0, 2 );
+ GroupPoints = new DlgRef_1SelExt(centralWidget());
+ GroupPoints->GroupBox1->setTitle(tr("GEOM_GLUE"));
+ GroupPoints->TextLabel1->setText(tr("GEOM_SELECTED_SHAPE"));
+ GroupPoints->PushButton1->setIcon(image0);
+ GroupPoints->LineEdit1->setReadOnly(true);
+
+ QLabel* aTolLab = new QLabel(tr("GEOM_TOLERANCE"), GroupPoints->Box);
+ myTolEdt = new SalomeApp_DoubleSpinBox(GroupPoints->Box);
+ initSpinBox(myTolEdt, 0., 100., DEFAULT_TOLERANCE_VALUE, "len_tol_precision");
+ myTolEdt->setValue(DEFAULT_TOLERANCE_VALUE);
+
+ QGridLayout* boxLayout = new QGridLayout(GroupPoints->Box);
+ boxLayout->setMargin(0); boxLayout->setSpacing(6);
+ boxLayout->addWidget(aTolLab, 0, 0);
+ boxLayout->addWidget(myTolEdt, 0, 2);
/***************************************************************/
- GroupPoints2 = new DlgRef_1SelExt( centralWidget() );
- GroupPoints2->GroupBox1->setTitle( tr( "GEOM_GLUE" ) );
- GroupPoints2->TextLabel1->setText( tr( "GEOM_SELECTED_SHAPE" ) );
- GroupPoints2->PushButton1->setIcon( image1 );
- GroupPoints2->LineEdit1->setReadOnly( true );
-
- QLabel* aTolLab2 = new QLabel( tr( "GEOM_TOLERANCE" ), GroupPoints2->Box );
- myTolEdt2 = new SalomeApp_DoubleSpinBox( GroupPoints2->Box );
- initSpinBox( myTolEdt2, 0., 100., DEFAULT_TOLERANCE_VALUE, "len_tol_precision" );
- myTolEdt2->setValue( DEFAULT_TOLERANCE_VALUE );
-
- myDetectBtn = new QPushButton( tr( "GEOM_DETECT" ) + QString( " [%1]" ).arg( tr( "GLUE_FACES" ) ),
- GroupPoints2->Box );
- mySubShapesChk = new QCheckBox( tr( "SELECT_FACES" ), GroupPoints2->Box );
-
- boxLayout = new QGridLayout( GroupPoints2->Box );
- boxLayout->setMargin( 0 ); boxLayout->setSpacing( 6 );
- boxLayout->addWidget( aTolLab2, 0, 0 );
- boxLayout->addWidget( myTolEdt2, 0, 2 );
- boxLayout->addWidget( myDetectBtn, 1, 0, 1, 3 );
- boxLayout->addWidget( mySubShapesChk, 2, 0, 1, 3 );
-
- QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
- layout->setMargin( 0 ); layout->setSpacing( 6 );
- layout->addWidget( GroupPoints );
- layout->addWidget( GroupPoints2 );
+ GroupPoints2 = new DlgRef_1SelExt(centralWidget());
+ GroupPoints2->GroupBox1->setTitle(tr("GEOM_GLUE"));
+ GroupPoints2->TextLabel1->setText(tr("GEOM_SELECTED_SHAPE"));
+ GroupPoints2->PushButton1->setIcon(image0);
+ GroupPoints2->LineEdit1->setReadOnly(true);
+
+ QLabel* aTolLab2 = new QLabel(tr("GEOM_TOLERANCE"), GroupPoints2->Box);
+ myTolEdt2 = new SalomeApp_DoubleSpinBox(GroupPoints2->Box);
+ initSpinBox(myTolEdt2, 0., 100., DEFAULT_TOLERANCE_VALUE, "len_tol_precision");
+ myTolEdt2->setValue(DEFAULT_TOLERANCE_VALUE);
+
+ QString aGlueString (" [%1]");
+ QString aSelString;
+ if (theGlueMode == TopAbs_FACE) {
+ aGlueString = aGlueString.arg(tr("GLUE_FACES"));
+ aSelString = tr("SELECT_FACES");
+ }
+ else if (theGlueMode == TopAbs_EDGE) {
+ aGlueString = aGlueString.arg(tr("GLUE_EDGES"));
+ aSelString = tr("SELECT_EDGES");
+ }
+ myDetectBtn = new QPushButton (tr("GEOM_DETECT") + aGlueString, GroupPoints2->Box);
+ mySubShapesChk = new QCheckBox (aSelString, GroupPoints2->Box);
+ myGlueAllEdgesChk = 0;
+
+ boxLayout = new QGridLayout(GroupPoints2->Box);
+ boxLayout->setMargin(0); boxLayout->setSpacing(6);
+ boxLayout->addWidget(aTolLab2, 0, 0);
+ boxLayout->addWidget(myTolEdt2, 0, 2);
+ boxLayout->addWidget(myDetectBtn, 1, 0, 1, 3);
+ boxLayout->addWidget(mySubShapesChk, 2, 0, 1, 3);
+
+ if (theGlueMode == TopAbs_FACE) {
+ myGlueAllEdgesChk = new QCheckBox (tr("GLUE_ALL_EDGES"), GroupPoints2->Box);
+ boxLayout->addWidget(myGlueAllEdgesChk, 3, 0, 1, 3);
+ myGlueAllEdgesChk->setChecked(false);
+ }
+
+ QVBoxLayout* layout = new QVBoxLayout(centralWidget());
+ layout->setMargin(0); layout->setSpacing(6);
+ layout->addWidget(GroupPoints);
+ layout->addWidget(GroupPoints2);
/***************************************************************/
- setHelpFileName( "glue_faces_operation_page.html" );
-
+ QString aHelpFileName;
+ switch ( myGlueMode ) {
+ case TopAbs_EDGE:
+ {
+ aHelpFileName = "glue_edges_operation_page.html";
+ break;
+ }
+ case TopAbs_FACE:
+ {
+ aHelpFileName = "glue_faces_operation_page.html";
+ break;
+ }
+ }
+ setHelpFileName(aHelpFileName);
+
// Disable second way of gluing if OCC viewer is not active one
- if ( myGeomGUI->getApp()->desktop()->activeWindow()->getViewManager()->getType()
- != OCCViewer_Viewer::Type() )
- mainFrame()->RadioButton2->setEnabled( false );
+ if (myGeomGUI->getApp()->desktop()->activeWindow()->getViewManager()->getType()
+ != OCCViewer_Viewer::Type())
+ mainFrame()->RadioButton2->setEnabled(false);
Init();
}
-
//=================================================================================
// function : ~RepairGUI_GlueDlg()
// purpose : Destroys the object and frees any allocated resources
{
}
-
//=================================================================================
// function : Init()
// purpose :
myObject = GEOM::GEOM_Object::_nil();
- //myGeomGUI->SetState( 0 );
- //globalSelection( GEOM_COMPOUND );
+ //myGeomGUI->SetState(0);
+ //globalSelection(GEOM_COMPOUND);
mainFrame()->GroupBoxPublish->show();
+ //Hide preview checkbox
+ mainFrame()->CheckBoxPreview->hide();
/* signals and slots connections */
- connect( buttonOk(), SIGNAL(clicked()), this, SLOT(ClickOnOk()));
- connect( buttonApply(), SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+ connect(buttonOk(), SIGNAL(clicked()), this, SLOT(ClickOnOk()));
+ connect(buttonApply(), SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+
+ connect(this, SIGNAL(constructorsClicked(int)), this, SLOT(ConstructorsClicked(int)));
- connect( this, SIGNAL( constructorsClicked( int ) ), this, SLOT( ConstructorsClicked( int ) ) );
+ connect(GroupPoints->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
+ connect(GroupPoints->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect( GroupPoints->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
- connect( GroupPoints->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect(GroupPoints2->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
+ connect(GroupPoints2->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
+ connect(myTolEdt2, SIGNAL(valueChanged(double)), this, SLOT(onTolerChanged(double)));
+ connect(mySubShapesChk, SIGNAL(stateChanged(int)), this, SLOT(onSubShapesChk()));
- connect( GroupPoints2->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
- connect( GroupPoints2->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
- connect( myTolEdt2, SIGNAL( valueChanged( double ) ), this, SLOT( onTolerChanged( double ) ) );
- connect( mySubShapesChk, SIGNAL( stateChanged( int ) ), this, SLOT( onSubShapesChk() ) );
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
- connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) );
+ connect(myDetectBtn, SIGNAL(clicked()), this, SLOT(onDetect()));
- connect( myDetectBtn, SIGNAL( clicked() ), this, SLOT( onDetect() ) );
+ initName(tr("GLUE_NEW_OBJ_NAME"));
- initName( tr( "GLUE_NEW_OBJ_NAME" ) );
+ ConstructorsClicked(0);
- ConstructorsClicked( 0 );
-
activateSelection();
updateButtonState();
}
-
//=================================================================================
// function : ConstructorsClicked()
// purpose : Radio button management
//=================================================================================
-void RepairGUI_GlueDlg::ConstructorsClicked( int constructorId )
+void RepairGUI_GlueDlg::ConstructorsClicked(int constructorId)
{
- if ( myCurrConstrId == constructorId )
+ if (myCurrConstrId == constructorId)
return;
-
- disconnect( myGeomGUI->getApp()->selectionMgr(), 0, this, 0 );
-
- switch ( constructorId ) {
+
+ disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
+
+ switch (constructorId) {
case 0:
GroupPoints2->hide();
GroupPoints->show();
- GroupPoints->LineEdit1->setText( "" );
+ GroupPoints->LineEdit1->setText("");
myEditCurrentArgument = GroupPoints->LineEdit1;
-
- if ( myCurrConstrId >= 0 ) {
+
+ if (myCurrConstrId >= 0) {
// i.e. it is not initialisation
// copy tolerance from previous tolerance field
- myTolEdt->setValue( myTolEdt2->value() );
+ myTolEdt->setValue(myTolEdt2->value());
}
break;
case 1:
GroupPoints->hide();
GroupPoints2->show();
- GroupPoints->LineEdit1->setText( "" );
+ GroupPoints->LineEdit1->setText("");
myEditCurrentArgument = GroupPoints2->LineEdit1;
-
- if ( myCurrConstrId >= 0 ) {
+
+ if (myCurrConstrId >= 0) {
// i.e. it is not initialisation
// copy tolerance from previous tolerance field
- myTolEdt2->setValue( myTolEdt->value() );
- mySubShapesChk->setChecked( false );
+ myTolEdt2->setValue(myTolEdt->value());
+ mySubShapesChk->setChecked(false);
clearTemporary();
}
break;
}
-
+
myCurrConstrId = constructorId;
myEditCurrentArgument->setFocus();
- connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) );
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
qApp->processEvents();
updateGeometry();
- resize( minimumSizeHint() );
+ resize(minimumSizeHint());
- displayPreview();
+ processPreview();
updateButtonState();
activateSelection();
SelectionIntoArgument();
}
-
//=================================================================================
// function : ClickOnOk()
// purpose : Same than click on apply but close this dialog.
//=================================================================================
void RepairGUI_GlueDlg::ClickOnOk()
{
- if ( ClickOnApply() )
+ setIsApplyAndClose(true);
+ if (ClickOnApply())
ClickOnCancel();
}
-
//=================================================================================
// function : ClickOnApply()
// purpose :
//=================================================================================
bool RepairGUI_GlueDlg::ClickOnApply()
{
- if ( !onAcceptLocal() )
+ if (!onAcceptLocal())
return false;
initName();
//GroupPoints->LineEdit1->setText("");
//myObject = GEOM::GEOM_Object::_nil();
- //globalSelection( GEOM_COMPOUND );
+ //globalSelection(GEOM_COMPOUND);
- ConstructorsClicked( getConstructorId() );
+ ConstructorsClicked(getConstructorId());
return true;
}
//=================================================================================
void RepairGUI_GlueDlg::SelectionIntoArgument()
{
- if ( mySubShapesChk->isChecked() && getConstructorId() == 1 ) {
+ if (mySubShapesChk->isChecked() && getConstructorId() == 1) {
updateButtonState();
return;
}
-
+
erasePreview();
- myEditCurrentArgument->setText( "" );
+ myEditCurrentArgument->setText("");
myObject = GEOM::GEOM_Object::_nil();
LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
- if ( aSelList.Extent() == 1 ) {
+ if (aSelList.Extent() == 1) {
Handle(SALOME_InteractiveObject) anIO = aSelList.First();
- Standard_Boolean aRes;
- myObject = GEOMBase::ConvertIOinGEOMObject( anIO, aRes );
- if ( aRes )
- myEditCurrentArgument->setText( GEOMBase::GetName( myObject ) );
+ myObject = GEOMBase::ConvertIOinGEOMObject(anIO);
+ if (!CORBA::is_nil(myObject))
+ myEditCurrentArgument->setText(GEOMBase::GetName(myObject));
}
updateButtonState();
}
void RepairGUI_GlueDlg::SetEditCurrentArgument()
{
const QObject* send = sender();
- if ( send == GroupPoints->PushButton1 || send == GroupPoints2->PushButton1 ) {
+ if (send == GroupPoints->PushButton1 || send == GroupPoints2->PushButton1) {
myEditCurrentArgument->setFocus();
SelectionIntoArgument();
}
}
-
//=================================================================================
// function : LineEditReturnPressed()
// purpose :
void RepairGUI_GlueDlg::LineEditReturnPressed()
{
const QObject* send = sender();
- if ( send == GroupPoints->LineEdit1 ) {
+ if (send == GroupPoints->LineEdit1) {
myEditCurrentArgument = GroupPoints->LineEdit1;
GEOMBase_Skeleton::LineEditReturnPressed();
}
- else if ( send == GroupPoints2->LineEdit1 ) {
+ else if (send == GroupPoints2->LineEdit1) {
myEditCurrentArgument = GroupPoints2->LineEdit1;
GEOMBase_Skeleton::LineEditReturnPressed();
}
}
-
//=================================================================================
// function : ActivateThisDialog()
// purpose :
void RepairGUI_GlueDlg::ActivateThisDialog()
{
GEOMBase_Skeleton::ActivateThisDialog();
- connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) );
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
//GroupPoints->LineEdit1->setText("");
//GroupPoints2->LineEdit1->setText("");
//myObject = GEOM::GEOM_Object::_nil();
- //myGeomGUI->SetState( 0 );
- //globalSelection( GEOM_COMPOUND );
+ //myGeomGUI->SetState(0);
+ //globalSelection(GEOM_COMPOUND);
activateSelection();
}
-
//=================================================================================
// function : enterEvent()
// purpose : Mouse enter onto the dialog to activate it
//=================================================================================
-void RepairGUI_GlueDlg::enterEvent( QEvent* )
+void RepairGUI_GlueDlg::enterEvent(QEvent*)
{
- if ( !mainFrame()->GroupConstructors->isEnabled() )
+ if (!mainFrame()->GroupConstructors->isEnabled())
ActivateThisDialog();
}
-
//=================================================================================
// function : createOperation
// purpose :
//=================================================================================
GEOM::GEOM_IOperations_ptr RepairGUI_GlueDlg::createOperation()
{
- return getGeomEngine()->GetIShapesOperations( getStudyId() );
+ return getGeomEngine()->GetIShapesOperations(getStudyId());
}
//=================================================================================
// function : isValid
// purpose :
//=================================================================================
-bool RepairGUI_GlueDlg::isValid( QString& msg )
+bool RepairGUI_GlueDlg::isValid(QString& msg)
{
bool ok = true;
double v = 0;
- switch ( getConstructorId() )
+ switch (getConstructorId())
{
case 0:
v = myTolEdt->value();
- ok = myTolEdt->isValid( msg, !IsPreview() );
+ ok = myTolEdt->isValid(msg, !IsPreview());
break;
case 1:
- v = myTolEdt2->value();
- ok = myTolEdt2->isValid( msg, !IsPreview() );
+ v = myTolEdt2->value();
+ ok = myTolEdt2->isValid(msg, !IsPreview());
break;
}
- return !myObject->_is_nil() && ( IsPreview() || v > 0. ) && ok;
+ return !myObject->_is_nil() && (IsPreview() || v > 0.) && ok;
}
//=================================================================================
// function : execute
// purpose :
//=================================================================================
-bool RepairGUI_GlueDlg::execute( ObjectList& objects )
+bool RepairGUI_GlueDlg::execute(ObjectList& objects)
{
bool aResult = false;
objects.clear();
- GEOM::GEOM_IShapesOperations_var anOper = GEOM::GEOM_IShapesOperations::_narrow( getOperation() );
- switch ( getConstructorId() ) {
+ GEOM::GEOM_IShapesOperations_var anOper = GEOM::GEOM_IShapesOperations::_narrow(getOperation());
+ switch (getConstructorId()) {
case 0:
{
- GEOM::GEOM_Object_var anObj = anOper->MakeGlueFaces( myObject, myTolEdt->value(), true );
+ GEOM::GEOM_Object_var anObj;
+ if (myGlueMode == TopAbs_FACE)
+ anObj = anOper->MakeGlueFaces(myObject, myTolEdt->value(), true);
+ else if (myGlueMode == TopAbs_EDGE)
+ anObj = anOper->MakeGlueEdges(myObject, myTolEdt->value());
+
aResult = !anObj->_is_nil();
- if ( aResult && !IsPreview() )
+ if (aResult && !IsPreview())
{
QStringList aParameters;
aParameters << myTolEdt->text();
anObj->SetParameters(aParameters.join(":").toLatin1().constData());
- objects.push_back( anObj._retn() );
+ objects.push_back(anObj._retn());
}
break;
}
case 1:
{
- if ( IsPreview() ) {
- // if this method is used for displaying preview then we must detect glue faces only
- ObjectList::iterator anIter;
- for ( anIter = myTmpObjs.begin(); anIter != myTmpObjs.end(); ++anIter )
- objects.push_back( GEOM::GEOM_Object::_duplicate( *anIter ) );
- return myTmpObjs.size() ? true : false;
+ if (IsPreview()) {
+ // if this method is used for displaying preview then we must detect glue faces/edges only
+ for (int i = 0; i < myTmpObjs.count(); i++) {
+ myTmpObjs[i].get()->Register(); // increment counter, since calling function will call UnRegister()
+ objects.push_back(myTmpObjs[i].copy());
+ }
+ return !myTmpObjs.isEmpty();
} // IsPreview
- // Make glue face by list.
+ // Make glue faces/edges by list.
// Iterate through myTmpObjs and verifies where each object is currently selected or not.
- QMap<QString, char> selected;
+ QSet<QString> selected;
// Get names of selected objects
LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
aSelMgr->selectedObjects(aSelList);
SALOME_ListIteratorOfListIO it (aSelList);
- for (; it.More(); it.Next())
- selected.insert(it.Value()->getName(), 0);
+ for (; it.More(); it.Next())
+ selected.insert(it.Value()->getName());
// Iterate through result and select objects with names from selection
// ObjectList toRemoveFromEnggine;
- ObjectList toGlue;
- ObjectList::iterator anIter;
- for ( anIter = myTmpObjs.begin(); anIter != myTmpObjs.end(); ++anIter ) {
- if ( selected.contains( myGeomGUI->getApp()->orb()->object_to_string(*anIter) ) )
- toGlue.push_back( *anIter );
- }
-
- // make glue faces
+
+ // make glue faces/edges
GEOM::ListOfGO_var aListForGlue = new GEOM::ListOfGO();
- aListForGlue->length( toGlue.size() );
- ObjectList::iterator anIter3 = toGlue.begin();
- for ( int i = 0; anIter3 != toGlue.end(); ++anIter3, ++i )
- aListForGlue[ i ] = *anIter3;
- GEOM::GEOM_Object_var anObj = anOper->MakeGlueFacesByList( myObject, myTolEdt2->value(), aListForGlue, true );
+ aListForGlue->length(myTmpObjs.count());
+ int added = 0;
+ for (int i = 0; i < myTmpObjs.count(); i++) {
+ CORBA::String_var tmpior = myGeomGUI->getApp()->orb()->object_to_string(myTmpObjs[i].get());
+ if (selected.contains(tmpior.in()))
+ aListForGlue[ added++ ] = myTmpObjs[i].copy();
+ }
+ aListForGlue->length(added);
+
+ GEOM::GEOM_Object_var anObj;
+ if (myGlueMode == TopAbs_FACE) {
+ bool doGlueAllEdges = myGlueAllEdgesChk->isChecked();
+ anObj = anOper->MakeGlueFacesByList(myObject, myTolEdt2->value(), aListForGlue.in(),
+ true, doGlueAllEdges);
+ }
+ else if (myGlueMode == TopAbs_EDGE)
+ anObj = anOper->MakeGlueEdgesByList(myObject, myTolEdt2->value(), aListForGlue.in());
aResult = !anObj->_is_nil();
- if ( aResult )
- {
- if ( !IsPreview() )
- {
+ if (aResult) {
+ if (!IsPreview()) {
QStringList aParameters;
aParameters << myTolEdt2->text();
anObj->SetParameters(aParameters.join(":").toLatin1().constData());
}
- objects.push_back( anObj._retn() );
+ objects.push_back(anObj._retn());
}
// Remove from engine useless objects
// function : restoreSubShapes
// purpose :
//=================================================================================
-void RepairGUI_GlueDlg::restoreSubShapes( SALOMEDS::Study_ptr theStudy,
- SALOMEDS::SObject_ptr theSObject )
+void RepairGUI_GlueDlg::restoreSubShapes(SALOMEDS::Study_ptr theStudy,
+ SALOMEDS::SObject_ptr theSObject)
{
- if ( mainFrame()->CheckBoxRestoreSS->isChecked() ) {
+ if (mainFrame()->CheckBoxRestoreSS->isChecked()) {
GEOM::find_shape_method aFindMethod = GEOM::FSM_GetInPlace;
- if ( getConstructorId() == 0 ) // MakeGlueFaces
+ if (getConstructorId() == 0) // MakeGlueFaces or MakeGlueEdges
aFindMethod = GEOM::FSM_GetInPlaceByHistory;
// empty list of arguments means that all arguments should be restored
- getGeomEngine()->RestoreSubShapesSO( theStudy, theSObject, GEOM::ListOfGO(),
+ getGeomEngine()->RestoreSubShapesSO(theStudy, theSObject, GEOM::ListOfGO(),
aFindMethod, /*theInheritFirstArg=*/true,
- mainFrame()->CheckBoxAddPrefix->isChecked() );
+ mainFrame()->CheckBoxAddPrefix->isChecked());
}
}
//================================================================
// Function : clearShapeBufferLocal
-// Purpose :
+// Purpose :
//================================================================
-void RepairGUI_GlueDlg::clearShapeBufferLocal( GEOM::GEOM_Object_ptr theObj )
+void RepairGUI_GlueDlg::clearShapeBufferLocal(GEOM::GEOM_Object_ptr theObj)
{
- if ( CORBA::is_nil( theObj ) )
+ if (CORBA::is_nil(theObj))
return;
- CORBA::String_var IOR = myGeomGUI->getApp()->orb()->object_to_string( theObj );
- TCollection_AsciiString asciiIOR( (char *)( IOR.in() ) );
- myGeomGUI->GetShapeReader().RemoveShapeFromBuffer( asciiIOR );
+ CORBA::String_var IOR = myGeomGUI->getApp()->orb()->object_to_string(theObj);
+ TCollection_AsciiString asciiIOR((char *)(IOR.in()));
+ myGeomGUI->GetShapeReader().RemoveShapeFromBuffer(asciiIOR);
- if ( !getStudy() || !( getStudy()->studyDS() ) )
+ if (!getStudy() || !(getStudy()->studyDS()))
return;
_PTR(Study) aStudy = getStudy()->studyDS();
- _PTR(SObject) aSObj ( aStudy->FindObjectIOR( std::string( IOR.in() ) ) );
- if ( !aSObj )
+ _PTR(SObject) aSObj (aStudy->FindObjectIOR(std::string(IOR.in())));
+ if (!aSObj)
return;
- _PTR(ChildIterator) anIt ( aStudy->NewChildIterator( aSObj ) );
- for ( anIt->InitEx( true ); anIt->More(); anIt->Next() ) {
+ _PTR(ChildIterator) anIt (aStudy->NewChildIterator(aSObj));
+ for (anIt->InitEx(true); anIt->More(); anIt->Next()) {
_PTR(GenericAttribute) anAttr;
- if ( anIt->Value()->FindAttribute(anAttr, "AttributeIOR") ) {
- _PTR(AttributeIOR) anIOR ( anAttr );
- TCollection_AsciiString asciiIOR( (char*)anIOR->Value().c_str() );
- myGeomGUI->GetShapeReader().RemoveShapeFromBuffer( asciiIOR );
+ if (anIt->Value()->FindAttribute(anAttr, "AttributeIOR")) {
+ _PTR(AttributeIOR) anIOR (anAttr);
+ TCollection_AsciiString asciiIOR((char*)anIOR->Value().c_str());
+ myGeomGUI->GetShapeReader().RemoveShapeFromBuffer(asciiIOR);
}
}
}
//================================================================
// Function : onAccept
// Purpose : This method should be called from dialog's slots onOk() and onApply()
-// It perfroms user input validation, then it
+// It perfroms user input validation, then it
// performs a proper operation and manages transactions, etc.
//================================================================
bool RepairGUI_GlueDlg::onAcceptLocal()
{
- if ( !getStudy() || !( getStudy()->studyDS() ) )
+ if (!getStudy() || !(getStudy()->studyDS()))
return false;
_PTR(Study) aStudy = getStudy()->studyDS();
bool aLocked = aStudy->GetProperties()->IsLocked();
- if ( aLocked ) {
+ if (aLocked) {
MESSAGE("GEOMBase_Helper::onAccept - ActiveStudy is locked");
- SUIT_MessageBox::warning( this, tr( "WRN_WARNING" ), tr( "WRN_STUDY_LOCKED" ), tr( "BUT_OK" ) );
+ SUIT_MessageBox::warning(this, tr("WRN_WARNING"), tr("WRN_STUDY_LOCKED"), tr("BUT_OK"));
return false;
}
QString msg;
- if ( !isValid( msg ) ) {
- showError( msg );
+ if (!isValid(msg)) {
+ showError(msg);
return false;
}
- erasePreview( false );
+ erasePreview(false);
try {
- if ( openCommand() ) {
+ if (openCommand()) {
SUIT_OverrideCursor wc;
-
- myGeomGUI->getApp()->putInfo( "" );
+
+ myGeomGUI->getApp()->putInfo("");
ObjectList objects;
-
- if ( !execute( objects ) ) {
+
+ if (!execute(objects)) {
wc.suspend();
abortCommand();
showError();
}
else {
const int nbObjs = objects.size();
- for ( ObjectList::iterator it = objects.begin(); it != objects.end(); ++it ) {
+ for (ObjectList::iterator it = objects.begin(); it != objects.end(); ++it) {
QString aName = getNewObjectName();
- if ( nbObjs > 1 ) {
- if ( aName.isEmpty() )
- aName = getPrefix( *it );
- aName = GEOMBase::GetDefaultName( aName );
+ if (nbObjs > 1) {
+ if (aName.isEmpty())
+ aName = getPrefix(*it);
+ aName = GEOMBase::GetDefaultName(aName);
}
else {
// PAL6521: use a prefix, if some dialog box doesn't reimplement getNewObjectName()
- if ( aName.isEmpty() )
- aName = GEOMBase::GetDefaultName( getPrefix( *it ) );
+ if (aName.isEmpty())
+ aName = GEOMBase::GetDefaultName(getPrefix(*it));
}
- addInStudy( *it, aName.toLatin1().data() );
- display( *it, false );
+ addInStudy(*it, aName.toLatin1().data());
+ display(*it, false);
}
-
- if ( nbObjs ) {
+
+ if (nbObjs) {
commitCommand();
updateObjBrowser();
- myGeomGUI->getApp()->putInfo( QObject::tr("GEOM_PRP_DONE") );
+ myGeomGUI->getApp()->putInfo(QObject::tr("GEOM_PRP_DONE"));
}
else {
abortCommand();
}
// JFA 28.12.2004 BEGIN // To enable warnings
- GEOM::GEOM_IShapesOperations_var anOper = GEOM::GEOM_IShapesOperations::_narrow( getOperation() );
- if ( !CORBA::is_nil(anOper) && !anOper->IsDone() ) {
+ GEOM::GEOM_IShapesOperations_var anOper = GEOM::GEOM_IShapesOperations::_narrow(getOperation());
+ if (!CORBA::is_nil(anOper) && !anOper->IsDone()) {
wc.suspend();
- QString msgw = QObject::tr( anOper->GetErrorCode() );
- SUIT_MessageBox::warning( this, tr( "WRN_WARNING" ), msgw, tr( "BUT_OK" ) );
+ QString msgw = QObject::tr(anOper->GetErrorCode());
+ SUIT_MessageBox::warning(this, tr("WRN_WARNING"), msgw, tr("BUT_OK"));
}
// JFA 28.12.2004 END
}
}
}
- catch( const SALOME::SALOME_Exception& e ) {
- SalomeApp_Tools::QtCatchCorbaException( e );
+ catch(const SALOME::SALOME_Exception& e) {
+ SalomeApp_Tools::QtCatchCorbaException(e);
abortCommand();
}
return true;
}
-
//=================================================================================
// function : onDetect
// purpose :
{
clearTemporary();
QString msg;
- if ( !isValid( msg ) ) {
- showError( msg );
+ if (!isValid(msg)) {
+ showError(msg);
return;
}
- buttonOk()->setEnabled( false );
- buttonApply()->setEnabled( false );
- globalSelection( GEOM_ALLSHAPES );
-
- GEOM::GEOM_IShapesOperations_var anOper = GEOM::GEOM_IShapesOperations::_narrow( getOperation() );
- GEOM::ListOfGO_var aList = anOper->GetGlueFaces( myObject, myTolEdt2->value() );
-
- for ( int i = 0, n = aList->length(); i < n; i++ )
- myTmpObjs.push_back(GEOM::GEOM_Object::_duplicate(aList[i]));
-
- if ( myTmpObjs.size() > 0 ) {
- msg = tr( "FACES_FOR_GLUING_ARE_DETECTED" ).arg( myTmpObjs.size() );
- mySubShapesChk->setChecked( true );
+ buttonOk()->setEnabled(false);
+ buttonApply()->setEnabled(false);
+ globalSelection(GEOM_ALLSHAPES);
+
+ GEOM::GEOM_IShapesOperations_var anOper = GEOM::GEOM_IShapesOperations::_narrow(getOperation());
+ GEOM::ListOfGO_var aList;
+ if (myGlueMode == TopAbs_FACE)
+ aList = anOper->GetGlueFaces(myObject.in(), myTolEdt2->value());
+ else if (myGlueMode == TopAbs_EDGE)
+ aList = anOper->GetGlueEdges(myObject.in(), myTolEdt2->value());
+
+ for (int i = 0, n = aList->length(); i < n; i++)
+ myTmpObjs << GEOM::GeomObjPtr(aList[i].in());
+
+ if (!myTmpObjs.isEmpty()) {
+ if (myGlueMode == TopAbs_FACE)
+ msg = tr("FACES_FOR_GLUING_ARE_DETECTED").arg(myTmpObjs.count());
+ else if (myGlueMode == TopAbs_EDGE)
+ msg = tr("EDGES_FOR_GLUING_ARE_DETECTED").arg(myTmpObjs.count());
+ mySubShapesChk->setChecked(true);
}
else {
- msg = tr( "THERE_ARE_NO_FACES_FOR_GLUING" );
+ if (myGlueMode == TopAbs_FACE)
+ msg = tr("THERE_ARE_NO_FACES_FOR_GLUING");
+ else if (myGlueMode == TopAbs_EDGE)
+ msg = tr("THERE_ARE_NO_EDGES_FOR_GLUING");
}
-
- connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) ) ;
- SUIT_MessageBox::information( this, tr( "GEOM_FREE_BOUNDS_TLT" ), msg, tr( "Close" ) );
+
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument())) ;
+ SUIT_MessageBox::information(this, tr("GEOM_FREE_BOUNDS_TLT"), msg, tr("Close"));
updateButtonState();
activateSelection();
}
//=================================================================================
void RepairGUI_GlueDlg::activateSelection()
{
- erasePreview( false );
-
+ erasePreview(false);
+
int anId = getConstructorId();
- if ( anId == 0 ) {
+ if (anId == 0) {
// Case of whole gluing
- disconnect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) );
-
- globalSelection( GEOM_ALLSHAPES );
- if ( myObject->_is_nil())
+ disconnect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
+
+ globalSelection(GEOM_ALLSHAPES);
+ if (myObject->_is_nil())
SelectionIntoArgument();
- connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) );
- }
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
+ }
else {
// Second case of gluing
- if ( !mySubShapesChk->isChecked() )
- globalSelection( GEOM_ALLSHAPES );
+ if (!mySubShapesChk->isChecked())
+ globalSelection(GEOM_ALLSHAPES);
else {
- displayPreview( true, false, false, 2/*line width*/, 1/*display mode*/, Quantity_NOC_RED );
- disconnect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) ) ;
- globalSelection( GEOM_PREVIEW );
- connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) ) ;
- }
+ displayPreview(true, true, false, false, 2/*line width*/, 1/*display mode*/, Quantity_NOC_RED);
+ disconnect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument())) ;
+ globalSelection(GEOM_PREVIEW);
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument())) ;
+ }
}
updateViewer();
}
//=================================================================================
// function : updateButtonState
-// purpose : Update button state
+// purpose : Update button state
//=================================================================================
void RepairGUI_GlueDlg::updateButtonState()
{
int anId = getConstructorId();
bool hasMainObj = !myObject->_is_nil();
- if ( anId == 0 ) {
- buttonOk()->setEnabled( hasMainObj );
- buttonApply()->setEnabled( hasMainObj );
+ if (anId == 0) {
+ buttonOk()->setEnabled(hasMainObj);
+ buttonApply()->setEnabled(hasMainObj);
}
else
{
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
- bool wasSelected = false;
SALOME_ListIteratorOfListIO it (aSelList);
- if (it.More() > 0)
- wasSelected = true;
- bool wasDetected = myTmpObjs.size() ? true : false;
- buttonOk()->setEnabled( hasMainObj && wasDetected && wasSelected );
- buttonApply()->setEnabled( hasMainObj && wasDetected && wasSelected );
- mySubShapesChk->setEnabled( hasMainObj && wasDetected );
- myDetectBtn->setEnabled( hasMainObj );
- if ( !hasMainObj || !wasDetected )
- mySubShapesChk->setChecked( false );
+ bool wasSelected = it.More() > 0;
+ bool wasDetected = !myTmpObjs.isEmpty();
+ buttonOk()->setEnabled(hasMainObj && wasDetected && wasSelected);
+ buttonApply()->setEnabled(hasMainObj && wasDetected && wasSelected);
+ mySubShapesChk->setEnabled(hasMainObj && wasDetected);
+ myDetectBtn->setEnabled(hasMainObj);
+ if (!hasMainObj || !wasDetected)
+ mySubShapesChk->setChecked(false);
}
}
//=================================================================================
void RepairGUI_GlueDlg::clearTemporary()
{
- ObjectList::iterator anIter;
- for ( anIter = myTmpObjs.begin(); anIter != myTmpObjs.end(); ++anIter )
- getGeomEngine()->RemoveObject(*anIter);
-
myTmpObjs.clear();
}
// function : onTolerChanged
// purpose : Remove temporary objects from engine
//=================================================================================
-void RepairGUI_GlueDlg::onTolerChanged( double /*theVal*/ )
+void RepairGUI_GlueDlg::onTolerChanged(double /*theVal*/)
{
clearTemporary();
activateSelection();
//=================================================================================
void RepairGUI_GlueDlg::onSubShapesChk()
{
- if ( !mySubShapesChk->isChecked() )
+ if (!mySubShapesChk->isChecked())
clearTemporary();
activateSelection();
updateButtonState();