-// GEOM GEOMGUI : GUI for Geometry component
+// GEOM GEOMGUI : GUI for Geometry component
//
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+// File : RepairGUI_DivideEdgeDlg.cxx
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
//
-//
-// File : RepairGUI_DivideEdgeDlg.cxx
-// Author : Lucien PIGNOLONI
-// Module : GEOM
-// $Header$
#include "RepairGUI_DivideEdgeDlg.h"
-#include "SalomeApp_Application.h"
-#include "LightApp_SelectionMgr.h"
-#include "SUIT_Session.h"
-#include "SALOME_ListIteratorOfListIO.hxx"
-
-#include "GEOMImpl_Types.hxx"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
-#include <TopAbs.hxx>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
+#include <SUIT_Session.h>
+#include <SUIT_ResourceMgr.h>
-#include <qlabel.h>
+#include <GEOMImpl_Types.hxx>
-using namespace std;
+#include <TopAbs.hxx>
+#include <TColStd_IndexedMapOfInteger.hxx>
//=================================================================================
// class : RepairGUI_DivideEdgeDlg()
// The dialog will by default be modeless, unless you set 'modal' to
// TRUE to construct a modal dialog.
//=================================================================================
-RepairGUI_DivideEdgeDlg::RepairGUI_DivideEdgeDlg (GeometryGUI* theGeometryGUI, QWidget* parent,
- const char* name, bool modal, WFlags fl)
- : GEOMBase_Skeleton(theGeometryGUI, parent, name, modal, WStyle_Customize |
- WStyle_NormalBorder | WStyle_Title | WStyle_SysMenu)
+RepairGUI_DivideEdgeDlg::RepairGUI_DivideEdgeDlg( GeometryGUI* theGeometryGUI, QWidget* parent,
+ bool modal )
+ : GEOMBase_Skeleton( theGeometryGUI, parent, modal )
{
- QPixmap image0(SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM",tr("ICON_DLG_DIVIDE_EDGE")));
- QPixmap image1(SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM",tr("ICON_SELECT")));
+ QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_DIVIDE_EDGE" ) ) );
+ QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
- setCaption(tr("GEOM_DIVIDE_EDGE_TITLE"));
+ setWindowTitle( tr( "GEOM_DIVIDE_EDGE_TITLE" ) );
/***************************************************************/
- GroupConstructors->setTitle(tr("GEOM_DIVIDE_EDGE_TITLE"));
- RadioButton1->setPixmap(image0);
- RadioButton2->close(TRUE);
- RadioButton3->close(TRUE);
-
- GroupPoints = new DlgRef_1Sel_Ext(this, "GroupPoints");
- GroupPoints->GroupBox1->setTitle(tr("GEOM_ADD_POINT"));
- GroupPoints->TextLabel1->setText(tr("GEOM_EDGE"));
- GroupPoints->PushButton1->setPixmap(image1);
+ mainFrame()->GroupConstructors->setTitle(tr("GEOM_DIVIDE_EDGE_TITLE"));
+ mainFrame()->RadioButton1->setIcon( image0 );
+ mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+ mainFrame()->RadioButton2->close();
+ mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+ mainFrame()->RadioButton3->close();
+
+ GroupPoints = new DlgRef_1SelExt( centralWidget() );
+ GroupPoints->GroupBox1->setTitle( tr( "GEOM_ADD_POINT" ) );
+ GroupPoints->TextLabel1->setText( tr( "GEOM_EDGE" ) );
+ GroupPoints->PushButton1->setIcon( image1 );
GroupPoints->LineEdit1->setReadOnly( true );
- myIsParameterGr = new QButtonGroup( 2, Qt::Vertical, GroupPoints );
- myIsParameterGr->setFrameStyle( QFrame::NoFrame );
- myIsParameterGr->setRadioButtonExclusive( true );
- myIsParameterGr->insert( new QRadioButton( tr( "GEOM_BY_PARAMETER" ), myIsParameterGr ), 0 );
- myIsParameterGr->insert( new QRadioButton( tr( "GEOM_BY_LENGTH" ), myIsParameterGr ), 1 );
- myIsParameterGr->find( 0 )->toggle();
+ QRadioButton* rb1 = new QRadioButton( tr( "GEOM_BY_PARAMETER" ), GroupPoints->Box );
+ QRadioButton* rb2 = new QRadioButton( tr( "GEOM_BY_LENGTH" ), GroupPoints->Box );
- QGridLayout* aLay = new QGridLayout( 0, 1, 2, 0, 6, "aLay" );
- myValEdt = new QtxDblSpinBox(0., 1., 0.1, GroupPoints->GroupBox1);
- myValEdt->setPrecision( 3 );
+ myIsParameterGr = new QButtonGroup( GroupPoints->Box );
+ myIsParameterGr->addButton( rb1, 0 );
+ myIsParameterGr->addButton( rb2, 1 );
+ rb1->setChecked( true );
+
+ myValEdt = new QDoubleSpinBox( GroupPoints->Box );
+ initSpinBox( myValEdt, 0., 1., 0.1, 3 );
myValEdt->setValue( 0.5 );
- QLabel* aLbl1 = new QLabel( tr( "GEOM_VALUE" ), GroupPoints->GroupBox1 );
- aLay->addWidget( aLbl1, 0, 0 );
- aLay->addWidget( myValEdt, 0, 1 );
+ QLabel* aLbl1 = new QLabel( tr( "GEOM_VALUE" ), GroupPoints->Box );
+
+ QGridLayout* l = new QGridLayout( GroupPoints->Box );
+ l->setMargin( 0 ); l->setSpacing( 6 );
+ l->addWidget( rb1, 0, 0, 1, 2 );
+ l->addWidget( rb2, 1, 0, 1, 2 );
+ l->addWidget( aLbl1, 2, 0 );
+ l->addWidget( myValEdt, 2, 1 );
+
+ QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+ layout->setMargin( 0 ); layout->setSpacing( 6 );
+ layout->addWidget( GroupPoints );
- Layout1->addWidget(GroupPoints, 2, 0);
- GroupPoints->getGroupBoxLayout()->addMultiCellWidget(myIsParameterGr, 1, 1, 0, 2);
- GroupPoints->getGroupBoxLayout()->addLayout( aLay, 2, 0 );
/***************************************************************/
- setHelpFileName("add_point_on_edge.htm");
+ setHelpFileName( "add_point_on_edge_operation_page.html" );
Init();
}
initSelection();
/* signals and slots connections */
- connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
- connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+ connect( buttonOk(), SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+ connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
- connect(GroupPoints->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupPoints->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
+ connect( GroupPoints->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+ connect( GroupPoints->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
- connect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(),
- SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
+ connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
initName( tr( "DEVIDE_EDGE_NEW_OBJECT_NAME" ) );
}
initName();
- myEditCurrentArgument->setText("");
+ myEditCurrentArgument->setText( "" );
myObject = GEOM::GEOM_Object::_nil();
myIndex = -1;
//=================================================================================
void RepairGUI_DivideEdgeDlg::SelectionIntoArgument()
{
- myEditCurrentArgument->setText("");
+ myEditCurrentArgument->setText( "" );
myObject = GEOM::GEOM_Object::_nil();
myIndex = -1;
- if ( IObjectCount() == 1 )
- {
+ if ( IObjectCount() == 1 ) {
Handle(SALOME_InteractiveObject) anIO = firstIObject();
Standard_Boolean aRes;
GEOM::GEOM_Object_var aSelectedObj = GEOMBase::ConvertIOinGEOMObject( anIO, aRes );
- if ( !CORBA::is_nil( aSelectedObj ) && aRes )
- {
+ if ( !CORBA::is_nil( aSelectedObj ) && aRes ) {
TopoDS_Shape aShape;
- if ( GEOMBase::GetShape( aSelectedObj, aShape, TopAbs_SHAPE ) )
- {
+ if ( GEOMBase::GetShape( aSelectedObj, aShape, TopAbs_SHAPE ) ) {
const int aType = aShape.ShapeType();
- if ( aType <= TopAbs_EDGE ) // edge, wire, face, shell, solid, compound
- {
+ if ( aType <= TopAbs_EDGE ) {
+ // edge, wire, face, shell, solid, compound
GEOM::short_array anIndexes;
TColStd_IndexedMapOfInteger aMap;
(SalomeApp_Application*)(SUIT_Session::session()->activeApplication());
anApp->selectionMgr()->GetIndexes( anIO, aMap );
- if ( !aMap.IsEmpty() ) // subshape selection
- {
+ if ( !aMap.IsEmpty() ) {
+ // subshape selection
myIndex = aMap( 1 );
myObject = aSelectedObj;
myEditCurrentArgument->setText( tr( "GEOM_EDGE" ) + "_1" );
}
- else if ( aType == TopAbs_EDGE ) // single shape selection
- {
+ else if ( aType == TopAbs_EDGE ) {
+ // single shape selection
myIndex = -1;
myObject = aSelectedObj;
myEditCurrentArgument->setText( GEOMBase::GetName( myObject ) );
}
- else // face, shell, solid or compound was selected, and NOT its subshape.
- {
+ else {
+ // face, shell, solid or compound was selected, and NOT its subshape.
myIndex = -1;
myObject = GEOM::GEOM_Object::_nil();
}
//=================================================================================
void RepairGUI_DivideEdgeDlg::SetEditCurrentArgument()
{
- if( sender() == GroupPoints->PushButton1 )
- {
+ if ( sender() == GroupPoints->PushButton1 ) {
GroupPoints->LineEdit1->setFocus();
myEditCurrentArgument = GroupPoints->LineEdit1;
}
//=================================================================================
void RepairGUI_DivideEdgeDlg::LineEditReturnPressed()
{
- if( sender() == GroupPoints->LineEdit1 )
- {
+ if ( sender() == GroupPoints->LineEdit1 ) {
myEditCurrentArgument = GroupPoints->LineEdit1;
GEOMBase_Skeleton::LineEditReturnPressed();
}
void RepairGUI_DivideEdgeDlg::ActivateThisDialog()
{
GEOMBase_Skeleton::ActivateThisDialog();
- connect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(),
- SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
+ connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
myObject = GEOM::GEOM_Object::_nil();
myIndex = -1;
// function : enterEvent()
// purpose : Mouse enter onto the dialog to activate it
//=================================================================================
-void RepairGUI_DivideEdgeDlg::enterEvent(QEvent* e)
+void RepairGUI_DivideEdgeDlg::enterEvent( QEvent* )
{
- if ( !GroupConstructors->isEnabled() )
+ if ( !mainFrame()->GroupConstructors->isEnabled() )
ActivateThisDialog();
}
-//=================================================================================
-// function : closeEvent()
-// purpose :
-//=================================================================================
-void RepairGUI_DivideEdgeDlg::closeEvent(QCloseEvent* e)
-{
- //myGeomGUI->SetState( -1 );
- GEOMBase_Skeleton::closeEvent( e );
-}
-
//=================================================================================
// function : createOperation
// function : isValid
// purpose :
//=================================================================================
-bool RepairGUI_DivideEdgeDlg::isValid( QString& msg )
+bool RepairGUI_DivideEdgeDlg::isValid( QString& )
{
return !myObject->_is_nil();
}
//=================================================================================
bool RepairGUI_DivideEdgeDlg::getIsByParameter() const
{
- return myIsParameterGr->find( 0 )->isOn();
+ return myIsParameterGr->button( 0 )->isChecked();
}
//=================================================================================