+# Copyright (C) 2014-2024 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
import unittest
import ModelAPI
-import model
+from salome.shaper import model
#-----------------------------------------------------------------------------
# Fixtures
def tearDown(self):
model.end()
+ assert(model.checkPythonDump())
model.reset()
# Create extrusion
sketch = model.addSketch(self.part, model.defaultPlane("XOY"))
circle = sketch.addCircle(0, 0, 10)
+ model.do()
- base = [sketch.selectFace(circle.result())]
- self.extrusion = model.addExtrusion(self.part, base,
- 10, 0)
+ base = sketch.selectFace()
+ self.extrusion = model.addExtrusion(self.part, base, 10, 0)
model.do()
def tearDown(self):
class FeaturesAddExtrusionTestCase(FeaturesAddExtrusionFixture):
- def test_add_extrusion_no_base(self):
- try:
- extrusion = model.addExtrusion(self.part)
- fail("addExtrusion should assert if base is not None")
- except AssertionError:
- pass
-
def test_add_extrusion_by_face_and_size(self):
sketch = model.addSketch(self.part, model.defaultPlane("XOY"))
circle = sketch.addCircle(0, 0, 10)
+ model.do()
- base = [sketch.selectFace(circle.result())]
- extrusion = model.addExtrusion(self.part, base,
- 10, 0)
+ base = sketch.selectFace()
+ extrusion = model.addExtrusion(self.part, base, 10, 0)
+ model.do()
- self.assertEqual(extrusion.getCreationMethod().value(), "BySizes")
- self.assertEqual(extrusion.getToSize().value(), 10)
- self.assertEqual(extrusion.getFromSize().value(), 0)
- self.assertEqual(extrusion.getToObject().context(), None)
- self.assertEqual(extrusion.getToOffset().value(), 0)
- self.assertEqual(extrusion.getFromObject().context(), None)
- self.assertEqual(extrusion.getFromOffset().value(), 0)
+ self.assertEqual(extrusion.creationMethod().value(), "BySizes")
+ self.assertEqual(extrusion.toSize().value(), 10)
+ self.assertEqual(extrusion.fromSize().value(), 0)
+ self.assertEqual(extrusion.toObject().context(), None)
+ self.assertEqual(extrusion.toOffset().isInitialized(), False)
+ self.assertEqual(extrusion.fromObject().context(), None)
+ self.assertEqual(extrusion.fromOffset().isInitialized(), False)
def test_add_extrusion_by_face_and_planes(self):
# base
base_sketch = model.addSketch(self.part, model.defaultPlane("XOY"))
base_circle = base_sketch.addCircle(0, 0, 10)
- base_sketch.selectFace(base_circle.result())
# to
to_plane = model.defaultPlane("XOY")
- to_plane.location().setZ(10)
+ to_plane.origin().setZ(10)
to_sketch = model.addSketch(self.part, to_plane)
to_circle = to_sketch.addCircle(0, 0, 10)
- to_sketch.selectFace(to_circle.result())
# from
from_plane = model.defaultPlane("XOY")
- from_plane.location().setZ(-10)
+ from_plane.origin().setZ(-10)
from_sketch = model.addSketch(self.part, from_plane)
from_circle = from_sketch.addCircle(0, 0, 10)
- from_sketch.selectFace(from_circle.result())
- base = [base_sketch]
+ model.do()
+
+ base = base_sketch.selectFace()
+ to_object = to_sketch.selectFace()[0]
+ from_object = from_sketch.selectFace()[0]
extrusion = model.addExtrusion(self.part, base,
- to_sketch, 15,
- from_sketch, 20)
+ to_object, 15,
+ from_object, 20)
- self.assertEqual(extrusion.getCreationMethod().value(), "ByPlanesAndOffsets")
- self.assertEqual(extrusion.getToSize().value(), 0)
- self.assertEqual(extrusion.getFromSize().value(), 0)
+ self.assertEqual(extrusion.creationMethod().value(), "ByPlanesAndOffsets")
+ self.assertEqual(extrusion.toSize().isInitialized(), False)
+ self.assertEqual(extrusion.fromSize().isInitialized(), False)
# self.assertEqual(extrusion.getToObject().context(),
# to_sketch.result())
- self.assertEqual(extrusion.getToOffset().value(), 15)
+ self.assertEqual(extrusion.toOffset().value(), 15)
# self.assertEqual(extrusion.getFromObject().context(),
# from_sketch.result())
- self.assertEqual(extrusion.getFromOffset().value(), 20)
+ self.assertEqual(extrusion.fromOffset().value(), 20)
class FeaturesExtrusionTestCase(FeaturesExtrusionFixture):
def test_extrusion_get_attribute(self):
# call method of the feature
- self.assertTrue(isinstance(self.extrusion.getBase(),
+ self.assertTrue(isinstance(self.extrusion.baseObjects(),
ModelAPI.ModelAPI_AttributeSelectionList))
- self.assertTrue(isinstance(self.extrusion.getCreationMethod(),
+ self.assertTrue(isinstance(self.extrusion.creationMethod(),
ModelAPI.ModelAPI_AttributeString))
- self.assertTrue(isinstance(self.extrusion.getToSize(),
+ self.assertTrue(isinstance(self.extrusion.toSize(),
ModelAPI.ModelAPI_AttributeDouble))
- self.assertTrue(isinstance(self.extrusion.getFromSize(),
+ self.assertTrue(isinstance(self.extrusion.fromSize(),
ModelAPI.ModelAPI_AttributeDouble))
- self.assertTrue(isinstance(self.extrusion.getToObject(),
+ self.assertTrue(isinstance(self.extrusion.toObject(),
ModelAPI.ModelAPI_AttributeSelection))
- self.assertTrue(isinstance(self.extrusion.getToOffset(),
+ self.assertTrue(isinstance(self.extrusion.toOffset(),
ModelAPI.ModelAPI_AttributeDouble))
- self.assertTrue(isinstance(self.extrusion.getFromObject(),
+ self.assertTrue(isinstance(self.extrusion.fromObject(),
ModelAPI.ModelAPI_AttributeSelection))
- self.assertTrue(isinstance(self.extrusion.getFromOffset(),
+ self.assertTrue(isinstance(self.extrusion.fromOffset(),
ModelAPI.ModelAPI_AttributeDouble))
def test_extrusion_set_sizes(self):
- self.extrusion.setSize(15, 20)
- self.assertEqual(self.extrusion.getCreationMethod().value(), "BySizes")
- self.assertEqual(self.extrusion.getToSize().value(), 15)
- self.assertEqual(self.extrusion.getFromSize().value(), 20)
- self.assertEqual(self.extrusion.getToObject().context(), None)
- self.assertEqual(self.extrusion.getToOffset().value(), 0)
- self.assertEqual(self.extrusion.getFromObject().context(), None)
- self.assertEqual(self.extrusion.getFromOffset().value(), 0)
+ self.extrusion.setSizes(15, 20)
+ self.assertEqual(self.extrusion.creationMethod().value(), "BySizes")
+ self.assertEqual(self.extrusion.toSize().value(), 15)
+ self.assertEqual(self.extrusion.fromSize().value(), 20)
+ self.assertEqual(self.extrusion.toObject().context(), None)
+ self.assertEqual(self.extrusion.toOffset().isInitialized(), False)
+ self.assertEqual(self.extrusion.fromObject().context(), None)
+ self.assertEqual(self.extrusion.fromOffset().isInitialized(), False)
def test_extrusion_set_planes_and_offsets(self):
- # base
- base_sketch = model.addSketch(self.part, model.defaultPlane("XOY"))
- base_circle = base_sketch.addCircle(0, 0, 10)
- base_sketch.selectFace(base_circle.result())
# to
to_plane = model.defaultPlane("XOY")
- to_plane.location().setZ(10)
+ to_plane.origin().setZ(10)
to_sketch = model.addSketch(self.part, to_plane)
to_circle = to_sketch.addCircle(0, 0, 10)
- to_sketch.selectFace(to_circle.result())
# from
from_plane = model.defaultPlane("XOY")
- from_plane.location().setZ(-10)
+ from_plane.origin().setZ(-10)
from_sketch = model.addSketch(self.part, from_plane)
from_circle = from_sketch.addCircle(0, 0, 10)
- from_sketch.selectFace(from_circle.result())
- self.extrusion.setPlanesAndOffsets(to_sketch, 15, from_sketch, 20)
+ model.do()
+
+ to_object = to_sketch.selectFace()[0]
+ from_object = from_sketch.selectFace()[0]
+
+ self.part.moveFeature(self.extrusion.feature(), from_sketch.feature())
+
+ self.extrusion.setPlanesAndOffsets(to_object, 15, from_object, 20)
if __name__ == "__main__":
- unittest.main()
+ test_program = unittest.main(exit=False)
+ assert test_program.result.wasSuccessful(), "Test failed"
