-// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
-//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+
// GEOM GEOMGUI : GUI for Geometry component
// File : PrimitiveGUI_DiskDlg.cxx
// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
//=================================================================================
PrimitiveGUI_DiskDlg::PrimitiveGUI_DiskDlg (GeometryGUI* theGeometryGUI, QWidget* parent,
bool modal, Qt::WindowFlags fl)
- : GEOMBase_Skeleton(theGeometryGUI, parent, modal, fl),
- myInitial(true)
+ : GEOMBase_Skeleton(theGeometryGUI, parent, modal, fl)
{
SUIT_ResourceMgr* aResMgr = SUIT_Session::session()->resourceMgr();
QPixmap image0 (aResMgr->loadPixmap("GEOM", tr("ICON_DLG_DISK_PNT_VEC_R")));
double aStep = resMgr->doubleValue("Geometry", "SettingsGeomStep", 100);
// min, max, step and decimals for spin boxes & initial values
- initSpinBox(GroupPntVecR->SpinBox_DX, 0.00001, COORD_MAX, aStep, 5); // VSR: TODO: DBL_DIGITS_DISPLAY
- initSpinBox(GroupDimensions->SpinBox_DX, 0.00001, COORD_MAX, aStep, 5); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox(GroupPntVecR->SpinBox_DX, 0.00001, COORD_MAX, aStep, "length_precision" );
+ initSpinBox(GroupDimensions->SpinBox_DX, 0.00001, COORD_MAX, aStep, "length_precision" );
// init variables
myEditCurrentArgument = GroupPntVecR->LineEdit1;
Group3Pnts->LineEdit1->setText("");
Group3Pnts->LineEdit2->setText("");
Group3Pnts->LineEdit3->setText("");
- myPoint = myDir = myPoint1 = myPoint2 = myPoint3 = GEOM::GEOM_Object::_nil();
+ myPoint.nullify();
+ myDir.nullify();
+ myPoint1.nullify();
+ myPoint2.nullify();
+ myPoint3.nullify();
GroupPntVecR->SpinBox_DX->setValue(100);
GroupDimensions->SpinBox_DX->setValue(100);
connect(GroupPntVecR->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
connect(GroupPntVecR->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupPntVecR->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupPntVecR->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
-
connect(Group3Pnts->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
connect(Group3Pnts->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
connect(Group3Pnts->PushButton3, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(Group3Pnts->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(Group3Pnts->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(Group3Pnts->LineEdit3, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
-
connect(GroupPntVecR->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(GroupDimensions->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
myOrientationType = 2;
else if (GroupOrientation->RadioButton3->isChecked())
myOrientationType = 3;
- displayPreview();
+ displayPreview(true);
}
//=================================================================================
qApp->processEvents();
updateGeometry();
resize(minimumSizeHint());
+ SelectionIntoArgument();
- if (myInitial) {
- myInitial = false;
- if (constructorId == 1 || constructorId == 2) {
- // on dialog initialization we init the first field with a selected object (if any)
- SelectionIntoArgument();
- }
- else {
- displayPreview();
- }
- }
- else {
- displayPreview();
- }
+ displayPreview(true);
}
//=================================================================================
aSelMgr->selectedObjects(aSelList);
if (aSelList.Extent() != 1) {
- if (myEditCurrentArgument == GroupPntVecR->LineEdit1) myPoint = GEOM::GEOM_Object::_nil();
- else if (myEditCurrentArgument == GroupPntVecR->LineEdit2) myDir = GEOM::GEOM_Object::_nil();
- else if (myEditCurrentArgument == Group3Pnts->LineEdit1) myPoint1 = GEOM::GEOM_Object::_nil();
- else if (myEditCurrentArgument == Group3Pnts->LineEdit2) myPoint2 = GEOM::GEOM_Object::_nil();
- else if (myEditCurrentArgument == Group3Pnts->LineEdit3) myPoint3 = GEOM::GEOM_Object::_nil();
+ if (myEditCurrentArgument == GroupPntVecR->LineEdit1) myPoint.nullify();
+ else if (myEditCurrentArgument == GroupPntVecR->LineEdit2) myDir.nullify();
+ else if (myEditCurrentArgument == Group3Pnts->LineEdit1) myPoint1.nullify();
+ else if (myEditCurrentArgument == Group3Pnts->LineEdit2) myPoint2.nullify();
+ else if (myEditCurrentArgument == Group3Pnts->LineEdit3) myPoint3.nullify();
return;
}
- // nbSel == 1
- Handle(SALOME_InteractiveObject) anIO = aSelList.First();
- Standard_Boolean testResult = Standard_False;
- GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject(anIO, testResult);
-
- if (!testResult || CORBA::is_nil(aSelectedObject))
- return;
-
- QString aName = GEOMBase::GetName(aSelectedObject);
-
- // If selected Vertex or Edge on the some Shape Get selection Subshape
+ TopAbs_ShapeEnum aNeedType = myEditCurrentArgument == GroupPntVecR->LineEdit2 ? TopAbs_EDGE : TopAbs_VERTEX;
+ GEOM::GeomObjPtr aSelectedObject = getSelected( aNeedType );
TopoDS_Shape aShape;
- if (GEOMBase::GetShape(aSelectedObject, aShape, TopAbs_SHAPE) && !aShape.IsNull())
- {
- TopAbs_ShapeEnum aNeedType = TopAbs_VERTEX;
- if (myEditCurrentArgument == GroupPntVecR->LineEdit2)
- aNeedType = TopAbs_EDGE;
-
- TColStd_IndexedMapOfInteger aMap;
- aSelMgr->GetIndexes(anIO, aMap);
- if (aMap.Extent() == 1) { // Local Selection
- int anIndex = aMap(1);
- if (aNeedType == TopAbs_EDGE)
- aName += QString(":edge_%1").arg(anIndex);
- else
- aName += QString(":vertex_%1").arg(anIndex);
-
- //Find SubShape Object in Father
- GEOM::GEOM_Object_var aFindedObject = GEOMBase_Helper::findObjectInFather(aSelectedObject, aName);
-
- if (aFindedObject == GEOM::GEOM_Object::_nil()) { // Object not found in study
- GEOM::GEOM_IShapesOperations_var aShapesOp = getGeomEngine()->GetIShapesOperations(getStudyId());
- aSelectedObject = aShapesOp->GetSubShape(aSelectedObject, anIndex);
- }
- else {
- aSelectedObject = aFindedObject; // get Object from study
- }
+ if ( aSelectedObject && GEOMBase::GetShape( aSelectedObject.get(), aShape ) && !aShape.IsNull() ) {
+ QString aName = GEOMBase::GetName( aSelectedObject.get() );
+
+ myEditCurrentArgument->setText(aName);
+
+ // clear selection
+ disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
+ myGeomGUI->getApp()->selectionMgr()->clearSelected();
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
+
+ if (myEditCurrentArgument == GroupPntVecR->LineEdit1) {
+ myPoint = aSelectedObject;
+ if (myPoint && !myDir)
+ GroupPntVecR->PushButton2->click();
}
- else { // Global Selection
- if (aShape.ShapeType() != aNeedType) {
- aSelectedObject = GEOM::GEOM_Object::_nil();
- aName = "";
- }
+ else if (myEditCurrentArgument == GroupPntVecR->LineEdit2) {
+ myDir = aSelectedObject;
+ if (myDir && !myPoint)
+ GroupPntVecR->PushButton1->click();
+ }
+ else if (myEditCurrentArgument == Group3Pnts->LineEdit1) {
+ myPoint1 = aSelectedObject;
+ if (myPoint1 && !myPoint2)
+ Group3Pnts->PushButton2->click();
+ }
+ else if (myEditCurrentArgument == Group3Pnts->LineEdit2) {
+ myPoint2 = aSelectedObject;
+ if (myPoint2 && !myPoint3)
+ Group3Pnts->PushButton3->click();
+ }
+ else if (myEditCurrentArgument == Group3Pnts->LineEdit3) {
+ myPoint3 = aSelectedObject;
+ if (myPoint3 && !myPoint1)
+ Group3Pnts->PushButton1->click();
}
}
- myEditCurrentArgument->setText(aName);
-
- // clear selection
- disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
- myGeomGUI->getApp()->selectionMgr()->clearSelected();
- connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
- this, SLOT(SelectionIntoArgument()));
-
- if (myEditCurrentArgument == GroupPntVecR->LineEdit1) {
- myPoint = aSelectedObject;
- if (!myPoint->_is_nil() && myDir->_is_nil())
- GroupPntVecR->PushButton2->click();
- }
- else if (myEditCurrentArgument == GroupPntVecR->LineEdit2) {
- myDir = aSelectedObject;
- if (!myDir->_is_nil() && myPoint->_is_nil())
- GroupPntVecR->PushButton1->click();
- }
- else if (myEditCurrentArgument == Group3Pnts->LineEdit1) {
- myPoint1 = aSelectedObject;
- if (!myPoint1->_is_nil() && myPoint2->_is_nil())
- Group3Pnts->PushButton2->click();
- }
- else if (myEditCurrentArgument == Group3Pnts->LineEdit2) {
- myPoint2 = aSelectedObject;
- if (!myPoint2->_is_nil() && myPoint3->_is_nil())
- Group3Pnts->PushButton3->click();
- }
- else if (myEditCurrentArgument == Group3Pnts->LineEdit3) {
- myPoint3 = aSelectedObject;
- if (!myPoint3->_is_nil() && myPoint1->_is_nil())
- Group3Pnts->PushButton1->click();
- }
-
- displayPreview();
+ displayPreview(true);
}
//=================================================================================
send->setDown(true);
// seems we need it only to avoid preview disappearing, caused by selection mode change
- displayPreview();
-}
-
-//=================================================================================
-// function : LineEditReturnPressed()
-// purpose :
-//=================================================================================
-void PrimitiveGUI_DiskDlg::LineEditReturnPressed()
-{
-QLineEdit* send = (QLineEdit*)sender();
- if (send == GroupPntVecR->LineEdit1 ||
- send == GroupPntVecR->LineEdit2 ||
- send == Group3Pnts->LineEdit1 ||
- send == Group3Pnts->LineEdit2 ||
- send == Group3Pnts->LineEdit3) {
- myEditCurrentArgument = send;
- GEOMBase_Skeleton::LineEditReturnPressed();
- }
+ displayPreview(true);
}
//=================================================================================
{
GEOMBase_Skeleton::ActivateThisDialog();
connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) );
+ this, SLOT( SelectionIntoArgument() ) );
ConstructorsClicked( getConstructorId() );
}
//=================================================================================
void PrimitiveGUI_DiskDlg::ValueChangedInSpinBox()
{
- displayPreview();
+ displayPreview(true);
}
//=================================================================================
//=================================================================================
bool PrimitiveGUI_DiskDlg::isValid (QString& msg)
{
- bool ok = true;
- if( getConstructorId() == 0 )
- ok = GroupDimensions->SpinBox_DX->isValid( msg, !IsPreview() ) && ok;
- else if( getConstructorId() == 1 )
- ok = GroupPntVecR->SpinBox_DX->isValid( msg, !IsPreview() ) && ok;
-
- const int id = getConstructorId();
- if (id == 0)
- return ok;
- else if (id == 1)
- return !myPoint->_is_nil() && !myDir->_is_nil() && getRadius() > 0 && ok;
- else if (id == 2)
- return !myPoint1->_is_nil() && !myPoint2->_is_nil() && !myPoint3->_is_nil() &&
- !isEqual(myPoint1, myPoint2) && !isEqual(myPoint1, myPoint3) && !isEqual(myPoint2, myPoint3);
- return false;
+ bool ok = false;
+ if ( getConstructorId() == 0 )
+ ok = GroupDimensions->SpinBox_DX->isValid( msg, !IsPreview() ) && getRadius() > 0;
+ else if ( getConstructorId() == 1 )
+ ok = GroupPntVecR->SpinBox_DX->isValid( msg, !IsPreview() ) && myPoint && myDir && getRadius() > 0;
+ else if ( getConstructorId() == 2 )
+ ok = myPoint1 && myPoint2 && myPoint3 && myPoint1 != myPoint2 && myPoint1 != myPoint3 && myPoint2 != myPoint3;
+ return ok;
}
//=================================================================================
GEOM::GEOM_Object_var anObj;
+ GEOM::GEOM_I3DPrimOperations_var anOper = GEOM::GEOM_I3DPrimOperations::_narrow(getOperation());
+
switch (getConstructorId()) {
case 0:
- anObj = GEOM::GEOM_I3DPrimOperations::_narrow(getOperation())->
- MakeDiskR(getRadius(), myOrientationType);
+ anObj = anOper->MakeDiskR(getRadius(), myOrientationType);
if (!anObj->_is_nil() && !IsPreview())
{
aParameters << GroupDimensions->SpinBox_DX->text();
- anObj->SetParameters(GeometryGUI::JoinObjectParameters(aParameters));
+ anObj->SetParameters(aParameters.join(":").toLatin1().constData());
}
res = true;
break;
case 1:
- anObj = GEOM::GEOM_I3DPrimOperations::_narrow(getOperation())->
- MakeDiskPntVecR(myPoint, myDir, getRadius());
+ anObj = anOper->MakeDiskPntVecR(myPoint.get(), myDir.get(), getRadius());
if (!anObj->_is_nil() && !IsPreview())
{
aParameters << GroupPntVecR->SpinBox_DX->text();
- anObj->SetParameters(GeometryGUI::JoinObjectParameters(aParameters));
+ anObj->SetParameters(aParameters.join(":").toLatin1().constData());
}
res = true;
break;
case 2:
- anObj = GEOM::GEOM_I3DPrimOperations::_narrow(getOperation())->
- MakeDiskThreePnt(myPoint1, myPoint2, myPoint3);
+ anObj = anOper->MakeDiskThreePnt(myPoint1.get(), myPoint2.get(), myPoint3.get());
res = true;
break;
}
//=================================================================================
void PrimitiveGUI_DiskDlg::addSubshapesToStudy()
{
- QMap<QString, GEOM::GEOM_Object_var> objMap;
-
switch (getConstructorId()) {
case 1:
- objMap[GroupPntVecR->LineEdit1->text()] = myPoint;
- objMap[GroupPntVecR->LineEdit2->text()] = myDir;
+ GEOMBase::PublishSubObject( myPoint.get() );
+ GEOMBase::PublishSubObject( myDir.get() );
break;
case 2:
- objMap[Group3Pnts->LineEdit1->text()] = myPoint1;
- objMap[Group3Pnts->LineEdit2->text()] = myPoint2;
- objMap[Group3Pnts->LineEdit3->text()] = myPoint3;
+ GEOMBase::PublishSubObject( myPoint1.get() );
+ GEOMBase::PublishSubObject( myPoint2.get() );
+ GEOMBase::PublishSubObject( myPoint3.get() );
+ break;
+ default:
break;
}
- addSubshapesToFather(objMap);
}
