-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2023 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
mainFrame()->RadioButton3->setAttribute(Qt::WA_DeleteOnClose);
mainFrame()->RadioButton3->close();
- GroupPoints = new DlgRef_2Sel2Spin(centralWidget());
+ GroupPoints = new DlgRef_2Sel3Spin1Check(centralWidget());
GroupPoints->GroupBox1->setTitle(tr("GEOM_ARGUMENTS"));
GroupPoints->TextLabel1->setText(tr("GEOM_BASE_POINT"));
GroupPoints->TextLabel2->setText(tr("GEOM_VECTOR"));
GroupPoints->TextLabel3->setText(tr("GEOM_RADIUS"));
GroupPoints->TextLabel4->setText(tr("GEOM_HEIGHT"));
+ GroupPoints->TextLabel5->setText(tr("GEOM_ANGLE"));
+ GroupPoints->checkBox->setText(tr(""));
GroupPoints->PushButton1->setIcon(image2);
GroupPoints->PushButton2->setIcon(image2);
+ GroupPoints->SpinBox_DZ->setDisabled(true);
- GroupDimensions = new DlgRef_2Spin(centralWidget());
+ GroupDimensions = new DlgRef_3Spin1CheckCyl(centralWidget());
GroupDimensions->GroupBox1->setTitle(tr("GEOM_BOX_OBJ"));
GroupDimensions->TextLabel1->setText(tr("GEOM_RADIUS"));
GroupDimensions->TextLabel2->setText(tr("GEOM_HEIGHT"));
+ GroupDimensions->TextLabel3->setText(tr("GEOM_ANGLE"));
+ GroupDimensions->checkBox->setText(tr(""));
+ GroupDimensions->SpinBox_DZ->setDisabled(true);
QVBoxLayout* layout = new QVBoxLayout(centralWidget());
layout->setMargin(0); layout->setSpacing(6);
double step = resMgr->doubleValue("Geometry", "SettingsGeomStep", 100);
// min, max, step and decimals for spin boxes & initial values
+ double SpecificStep = 5;
initSpinBox(GroupPoints->SpinBox_DX, 0.00001, COORD_MAX, step, "length_precision" );
initSpinBox(GroupPoints->SpinBox_DY, 0.00001, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupPoints->SpinBox_DZ, 0., 360., SpecificStep, "angle_precision" );
+
initSpinBox(GroupDimensions->SpinBox_DX, 0.00001, COORD_MAX, step, "length_precision" );
initSpinBox(GroupDimensions->SpinBox_DY, 0.00001, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupDimensions->SpinBox_DZ, 0., 360., SpecificStep, "angle_precision" );
// init variables
myEditCurrentArgument = GroupPoints->LineEdit1;
myPoint.nullify();
myDir.nullify();
- double aRadius(100.0), aHeight(300.0);
+ double aRadius(100.0), aHeight(300.0), aAngle(270.);
GroupPoints->SpinBox_DX->setValue(aRadius);
GroupPoints->SpinBox_DY->setValue(aHeight);
+ GroupPoints->SpinBox_DZ->setValue(aAngle);
GroupDimensions->SpinBox_DX->setValue(aRadius);
GroupDimensions->SpinBox_DY->setValue(aHeight);
+ GroupDimensions->SpinBox_DZ->setValue(aAngle);
// signals and slots connections
connect(buttonOk(), SIGNAL(clicked()), this, SLOT(ClickOnOk()));
connect(GroupPoints->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(GroupPoints->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
+ connect(GroupPoints->SpinBox_DZ, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(GroupDimensions->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(GroupDimensions->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
+ connect(GroupDimensions->SpinBox_DZ, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), this, SLOT(SetDoubleSpinBoxStep(double)));
-
+
+ connect(GroupPoints->checkBox, SIGNAL(toggled(bool)), this, SLOT(ActivateAngle()));
+ connect(GroupDimensions->checkBox, SIGNAL(toggled(bool)), this, SLOT(ActivateAngle()));
+
initName(tr("GEOM_CYLINDER"));
setConstructorId(1); // simplest constructor
updateGeometry();
resize(minimumSizeHint());
SelectionIntoArgument();
-
+
displayPreview(true);
}
disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
myGeomGUI->getApp()->selectionMgr()->clearSelected();
connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
- this, SLOT(SelectionIntoArgument()));
+ this, SLOT(SelectionIntoArgument()));
}
}
-
displayPreview(true);
}
GroupPoints->LineEdit2->setEnabled(false);
globalSelection(GEOM_POINT); // to break previous local selection
- localSelection(GEOM::GEOM_Object::_nil(), TopAbs_VERTEX);
+ localSelection(TopAbs_VERTEX);
}
else if (send == GroupPoints->PushButton2) {
myEditCurrentArgument = GroupPoints->LineEdit2;
GroupPoints->LineEdit1->setEnabled(false);
globalSelection(GEOM_LINE); // to break previous local selection
- localSelection(GEOM::GEOM_Object::_nil(), TopAbs_EDGE);
+ localSelection(TopAbs_EDGE);
}
connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
this, SLOT(SelectionIntoArgument()));
//=================================================================================
void PrimitiveGUI_CylinderDlg::ValueChangedInSpinBox()
{
+ QString msg;
+ if (!isValid(msg)) {
+ erasePreview();
+ return;
+ }
displayPreview(true);
}
//=================================================================================
GEOM::GEOM_IOperations_ptr PrimitiveGUI_CylinderDlg::createOperation()
{
- return getGeomEngine()->GetI3DPrimOperations(getStudyId());
+ return getGeomEngine()->GetI3DPrimOperations();
}
//=================================================================================
{
ok = GroupPoints->SpinBox_DX->isValid( msg, !IsPreview() ) &&
GroupPoints->SpinBox_DY->isValid( msg, !IsPreview() ) &&
+ ( !GroupPoints->checkBox->isChecked() || GroupPoints->SpinBox_DZ->isValid( msg, !IsPreview() ) ) &&
myPoint && myDir;
+ if ( GroupPoints->checkBox->isChecked() &&
+ ( GroupPoints->SpinBox_DZ->value() <= 0. || GroupPoints->SpinBox_DZ->value() >= 360. ) ) {
+ msg += tr("GEOM_CYLINDER_ANGLE_ERR") + "\n";
+ ok = false;
+ }
}
else if( getConstructorId() == 1 )
{
ok = GroupDimensions->SpinBox_DX->isValid( msg, !IsPreview() ) &&
- GroupDimensions->SpinBox_DY->isValid( msg, !IsPreview() );
+ GroupDimensions->SpinBox_DY->isValid( msg, !IsPreview() ) &&
+ ( !GroupDimensions->checkBox->isChecked() || GroupDimensions->SpinBox_DZ->isValid( msg, !IsPreview() ) );
+ if ( GroupDimensions->checkBox->isChecked() &&
+ ( GroupDimensions->SpinBox_DZ->value() <= 0. || GroupDimensions->SpinBox_DZ->value() >= 360. ) ) {
+ msg += tr("GEOM_CYLINDER_ANGLE_ERR") + "\n";
+ ok = false;
+ }
}
ok = qAbs( getHeight() ) > Precision::Confusion() && ok;
+ ok = qAbs( getRadius() ) > Precision::Confusion() && ok;
return ok;
}
bool PrimitiveGUI_CylinderDlg::execute (ObjectList& objects)
{
bool res = false;
-
+
GEOM::GEOM_Object_var anObj;
GEOM::GEOM_I3DPrimOperations_var anOper = GEOM::GEOM_I3DPrimOperations::_narrow(getOperation());
switch (getConstructorId()) {
case 0:
if ( myPoint && myDir ) {
- anObj = anOper->MakeCylinderPntVecRH(myPoint.get(), myDir.get(), getRadius(), getHeight());
+ if ( GroupPoints->checkBox->isChecked() ) {
+ anObj = anOper->MakeCylinderPntVecRHA(myPoint.get(), myDir.get(), getRadius(), getHeight(), getAngle()*M_PI/180.);
+ if (!anObj->_is_nil() && !IsPreview())
+ {
+ QStringList aParameters;
+ aParameters << GroupPoints->SpinBox_DX->text();
+ aParameters << GroupPoints->SpinBox_DY->text();
+ aParameters << GroupPoints->SpinBox_DZ->text();
+ anObj->SetParameters(aParameters.join(":").toUtf8().constData());
+ }
+ res = true;
+ }
+ else {
+ anObj = anOper->MakeCylinderPntVecRH(myPoint.get(), myDir.get(), getRadius(), getHeight());
+ if (!anObj->_is_nil() && !IsPreview())
+ {
+ QStringList aParameters;
+ aParameters << GroupPoints->SpinBox_DX->text();
+ aParameters << GroupPoints->SpinBox_DY->text();
+ anObj->SetParameters(aParameters.join(":").toUtf8().constData());
+ }
+ res = true;
+ }
+ }
+ break;
+ case 1:
+ if ( GroupDimensions->checkBox->isChecked() ) {
+ anObj = anOper->MakeCylinderRHA(getRadius(), getHeight(), getAngle()*M_PI/180.);
if (!anObj->_is_nil() && !IsPreview())
{
- QStringList aParameters;
- aParameters << GroupPoints->SpinBox_DX->text();
- aParameters << GroupPoints->SpinBox_DY->text();
- anObj->SetParameters(aParameters.join(":").toLatin1().constData());
+ QStringList aParameters;
+ aParameters << GroupDimensions->SpinBox_DX->text();
+ aParameters << GroupDimensions->SpinBox_DY->text();
+ aParameters << GroupDimensions->SpinBox_DZ->text();
+ anObj->SetParameters(aParameters.join(":").toUtf8().constData());
}
res = true;
}
- break;
- case 1:
- anObj = anOper->MakeCylinderRH(getRadius(), getHeight());
- if (!anObj->_is_nil() && !IsPreview())
- {
- QStringList aParameters;
- aParameters << GroupDimensions->SpinBox_DX->text();
- aParameters << GroupDimensions->SpinBox_DY->text();
- anObj->SetParameters(aParameters.join(":").toLatin1().constData());
+ else {
+ anObj = anOper->MakeCylinderRH(getRadius(), getHeight());
+ if (!anObj->_is_nil() && !IsPreview())
+ {
+ QStringList aParameters;
+ aParameters << GroupDimensions->SpinBox_DX->text();
+ aParameters << GroupDimensions->SpinBox_DY->text();
+ anObj->SetParameters(aParameters.join(":").toUtf8().constData());
+ }
+ res = true;
}
- res = true;
break;
}
return 0;
}
+//=================================================================================
+// function : getAngle()
+// purpose :
+//=================================================================================
+double PrimitiveGUI_CylinderDlg::getAngle() const
+{
+ int aConstructorId = getConstructorId();
+ if (aConstructorId == 0)
+ return GroupPoints->SpinBox_DZ->value();
+ else if (aConstructorId == 1)
+ return GroupDimensions->SpinBox_DZ->value();
+ return 0;
+}
+
//=================================================================================
// function : addSubshapeToStudy
// purpose : virtual method to add new SubObjects if local selection
GEOMBase::PublishSubObject( myDir.get() );
}
}
+
+//=================================================================================
+// function : getSourceObjects
+// purpose : virtual method to get source objects
+//=================================================================================
+QList<GEOM::GeomObjPtr> PrimitiveGUI_CylinderDlg::getSourceObjects()
+{
+ QList<GEOM::GeomObjPtr> res;
+ res << myPoint << myDir;
+ return res;
+}
+
+//=================================================================================
+// function : ActivateAngle()
+// purpose : enable the
+//=================================================================================
+void PrimitiveGUI_CylinderDlg::ActivateAngle()
+{
+ int aConstructorId = getConstructorId();
+ if (aConstructorId == 0){
+ GroupPoints->SpinBox_DZ->setEnabled( GroupPoints->checkBox->isChecked() );
+ processPreview();
+ }
+ else if (aConstructorId == 1){
+ GroupDimensions->SpinBox_DZ->setEnabled( GroupDimensions->checkBox->isChecked() );
+ processPreview();
+ }
+}