-// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2023 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+
// GEOM GEOMGUI : GUI for Geometry component
// File : PrimitiveGUI_CylinderDlg.cxx
// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
mainFrame()->RadioButton3->setAttribute(Qt::WA_DeleteOnClose);
mainFrame()->RadioButton3->close();
- GroupPoints = new DlgRef_2Sel2Spin(centralWidget());
+ GroupPoints = new DlgRef_2Sel3Spin1Check(centralWidget());
GroupPoints->GroupBox1->setTitle(tr("GEOM_ARGUMENTS"));
GroupPoints->TextLabel1->setText(tr("GEOM_BASE_POINT"));
GroupPoints->TextLabel2->setText(tr("GEOM_VECTOR"));
GroupPoints->TextLabel3->setText(tr("GEOM_RADIUS"));
GroupPoints->TextLabel4->setText(tr("GEOM_HEIGHT"));
+ GroupPoints->TextLabel5->setText(tr("GEOM_ANGLE"));
+ GroupPoints->checkBox->setText(tr(""));
GroupPoints->PushButton1->setIcon(image2);
GroupPoints->PushButton2->setIcon(image2);
+ GroupPoints->SpinBox_DZ->setDisabled(true);
- GroupDimensions = new DlgRef_2Spin(centralWidget());
+ GroupDimensions = new DlgRef_3Spin1CheckCyl(centralWidget());
GroupDimensions->GroupBox1->setTitle(tr("GEOM_BOX_OBJ"));
GroupDimensions->TextLabel1->setText(tr("GEOM_RADIUS"));
GroupDimensions->TextLabel2->setText(tr("GEOM_HEIGHT"));
+ GroupDimensions->TextLabel3->setText(tr("GEOM_ANGLE"));
+ GroupDimensions->checkBox->setText(tr(""));
+ GroupDimensions->SpinBox_DZ->setDisabled(true);
QVBoxLayout* layout = new QVBoxLayout(centralWidget());
layout->setMargin(0); layout->setSpacing(6);
double step = resMgr->doubleValue("Geometry", "SettingsGeomStep", 100);
// min, max, step and decimals for spin boxes & initial values
- initSpinBox(GroupPoints->SpinBox_DX, 0.00001, COORD_MAX, step, 5); // VSR: TODO: DBL_DIGITS_DISPLAY
- initSpinBox(GroupPoints->SpinBox_DY, 0.00001, COORD_MAX, step, 5); // VSR: TODO: DBL_DIGITS_DISPLAY
- initSpinBox(GroupDimensions->SpinBox_DX, 0.00001, COORD_MAX, step, 5); // VSR: TODO: DBL_DIGITS_DISPLAY
- initSpinBox(GroupDimensions->SpinBox_DY, 0.00001, COORD_MAX, step, 5); // VSR: TODO: DBL_DIGITS_DISPLAY
+ double SpecificStep = 5;
+ initSpinBox(GroupPoints->SpinBox_DX, 0.00001, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupPoints->SpinBox_DY, 0.00001, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupPoints->SpinBox_DZ, 0., 360., SpecificStep, "angle_precision" );
+
+ initSpinBox(GroupDimensions->SpinBox_DX, 0.00001, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupDimensions->SpinBox_DY, 0.00001, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupDimensions->SpinBox_DZ, 0., 360., SpecificStep, "angle_precision" );
// init variables
myEditCurrentArgument = GroupPoints->LineEdit1;
GroupPoints->LineEdit1->setText("");
GroupPoints->LineEdit2->setText("");
- myPoint = myDir = GEOM::GEOM_Object::_nil();
+ myPoint.nullify();
+ myDir.nullify();
- double aRadius(100.0), aHeight(300.0);
+ double aRadius(100.0), aHeight(300.0), aAngle(270.);
GroupPoints->SpinBox_DX->setValue(aRadius);
GroupPoints->SpinBox_DY->setValue(aHeight);
+ GroupPoints->SpinBox_DZ->setValue(aAngle);
GroupDimensions->SpinBox_DX->setValue(aRadius);
GroupDimensions->SpinBox_DY->setValue(aHeight);
+ GroupDimensions->SpinBox_DZ->setValue(aAngle);
// signals and slots connections
connect(buttonOk(), SIGNAL(clicked()), this, SLOT(ClickOnOk()));
connect(GroupPoints->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
connect(GroupPoints->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupPoints->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupPoints->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
-
connect(GroupPoints->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(GroupPoints->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
+ connect(GroupPoints->SpinBox_DZ, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(GroupDimensions->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(GroupDimensions->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
+ connect(GroupDimensions->SpinBox_DZ, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox()));
connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), this, SLOT(SetDoubleSpinBoxStep(double)));
-
+
+ connect(GroupPoints->checkBox, SIGNAL(toggled(bool)), this, SLOT(ActivateAngle()));
+ connect(GroupDimensions->checkBox, SIGNAL(toggled(bool)), this, SLOT(ActivateAngle()));
+
initName(tr("GEOM_CYLINDER"));
setConstructorId(1); // simplest constructor
qApp->processEvents();
updateGeometry();
resize(minimumSizeHint());
-
- if (myInitial) {
- myInitial = false;
- if (constructorId == 0) {
- // on dialog initialization we init the first field with a selected object (if any)
- SelectionIntoArgument();
- }
- else {
- displayPreview();
- }
- }
- else {
- displayPreview();
- }
+ SelectionIntoArgument();
+
+ displayPreview(true);
}
//=================================================================================
//=================================================================================
void PrimitiveGUI_CylinderDlg::ClickOnOk()
{
+ setIsApplyAndClose( true );
if (ClickOnApply())
ClickOnCancel();
}
if (aSelList.Extent() != 1) {
if (myEditCurrentArgument == GroupPoints->LineEdit1)
- myPoint = GEOM::GEOM_Object::_nil();
+ myPoint.nullify();
else if (myEditCurrentArgument == GroupPoints->LineEdit2)
- myDir = GEOM::GEOM_Object::_nil();
+ myDir.nullify();
return;
}
- // nbSel == 1
- Standard_Boolean testResult = Standard_False;
- GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject(aSelList.First(), testResult);
-
- if (!testResult || CORBA::is_nil(aSelectedObject))
- return;
-
- QString aName = GEOMBase::GetName(aSelectedObject);
-
- // Get Selected object if selected subshape
+ TopAbs_ShapeEnum aNeedType = myEditCurrentArgument == GroupPoints->LineEdit2 ? TopAbs_EDGE : TopAbs_VERTEX;
+ GEOM::GeomObjPtr aSelectedObject = getSelected( aNeedType );
TopoDS_Shape aShape;
- if (GEOMBase::GetShape(aSelectedObject, aShape, TopAbs_SHAPE) && !aShape.IsNull())
- {
- TopAbs_ShapeEnum aNeedType = TopAbs_VERTEX;
- if (myEditCurrentArgument == GroupPoints->LineEdit2)
- aNeedType = TopAbs_EDGE;
-
- TColStd_IndexedMapOfInteger aMap;
- aSelMgr->GetIndexes(aSelList.First(), aMap);
- if (aMap.Extent() == 1) { // Local Selection
- int anIndex = aMap(1);
- if (aNeedType == TopAbs_EDGE)
- aName.append(":edge_" + QString::number(anIndex));
- else
- aName.append(":vertex_" + QString::number(anIndex));
-
- //Find SubShape Object in Father
- GEOM::GEOM_Object_var aFindedObject = GEOMBase_Helper::findObjectInFather(aSelectedObject, aName);
-
- if (aFindedObject == GEOM::GEOM_Object::_nil()) { // Object not found in study
- GEOM::GEOM_IShapesOperations_var aShapesOp =
- getGeomEngine()->GetIShapesOperations(getStudyId());
- aSelectedObject = aShapesOp->GetSubShape(aSelectedObject, anIndex);
- }
- else {
- aSelectedObject = aFindedObject; // get Object from study
- }
+ if ( aSelectedObject && GEOMBase::GetShape( aSelectedObject.get(), aShape ) && !aShape.IsNull() ) {
+ QString aName = GEOMBase::GetName( aSelectedObject.get() );
+
+ myEditCurrentArgument->setText(aName);
+
+ if (myEditCurrentArgument == GroupPoints->LineEdit1) {
+ myPoint = aSelectedObject;
+ if (myPoint && !myDir)
+ GroupPoints->PushButton2->click();
}
- else { // Global Selection
- if (aShape.ShapeType() != aNeedType) {
- aSelectedObject = GEOM::GEOM_Object::_nil();
- aName = "";
- }
+ else if (myEditCurrentArgument == GroupPoints->LineEdit2) {
+ myDir = aSelectedObject;
+ if (myDir && !myPoint)
+ GroupPoints->PushButton1->click();
+ }
+ // clear selection
+ if ((myDir && !myPoint) || (myPoint && !myDir)) {
+ disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
+ myGeomGUI->getApp()->selectionMgr()->clearSelected();
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
}
}
-
- myEditCurrentArgument->setText(aName);
-
- // clear selection
- disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
- myGeomGUI->getApp()->selectionMgr()->clearSelected();
- connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
- this, SLOT(SelectionIntoArgument()));
-
- if (myEditCurrentArgument == GroupPoints->LineEdit1) {
- myPoint = aSelectedObject;
- if (!myPoint->_is_nil() && myDir->_is_nil())
- GroupPoints->PushButton2->click();
- }
- else if (myEditCurrentArgument == GroupPoints->LineEdit2) {
- myDir = aSelectedObject;
- if (!myDir->_is_nil() && myPoint->_is_nil())
- GroupPoints->PushButton1->click();
- }
-
- displayPreview();
+ displayPreview(true);
}
//=================================================================================
GroupPoints->LineEdit2->setEnabled(false);
globalSelection(GEOM_POINT); // to break previous local selection
- localSelection(GEOM::GEOM_Object::_nil(), TopAbs_VERTEX);
+ localSelection(TopAbs_VERTEX);
}
else if (send == GroupPoints->PushButton2) {
myEditCurrentArgument = GroupPoints->LineEdit2;
GroupPoints->LineEdit1->setEnabled(false);
globalSelection(GEOM_LINE); // to break previous local selection
- localSelection(GEOM::GEOM_Object::_nil(), TopAbs_EDGE);
+ localSelection(TopAbs_EDGE);
}
connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
this, SLOT(SelectionIntoArgument()));
send->setDown(true);
// seems we need it only to avoid preview disappearing, caused by selection mode change
- displayPreview();
-}
-
-//=================================================================================
-// function : LineEditReturnPressed()
-// purpose :
-//=================================================================================
-void PrimitiveGUI_CylinderDlg::LineEditReturnPressed()
-{
- QLineEdit* send = (QLineEdit*)sender();
- if (send == GroupPoints->LineEdit1 ||
- send == GroupPoints->LineEdit2) {
- myEditCurrentArgument = send;
- GEOMBase_Skeleton::LineEditReturnPressed();
- }
+ displayPreview(true);
}
//=================================================================================
GEOMBase_Skeleton::ActivateThisDialog();
connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) );
+ this, SLOT( SelectionIntoArgument() ) );
ConstructorsClicked( getConstructorId() );
}
//=================================================================================
void PrimitiveGUI_CylinderDlg::ValueChangedInSpinBox()
{
- displayPreview();
+ QString msg;
+ if (!isValid(msg)) {
+ erasePreview();
+ return;
+ }
+ displayPreview(true);
}
//=================================================================================
//=================================================================================
GEOM::GEOM_IOperations_ptr PrimitiveGUI_CylinderDlg::createOperation()
{
- return getGeomEngine()->GetI3DPrimOperations(getStudyId());
+ return getGeomEngine()->GetI3DPrimOperations();
}
//=================================================================================
//=================================================================================
bool PrimitiveGUI_CylinderDlg::isValid (QString& msg)
{
- bool ok = true;
+ bool ok = false;
if( getConstructorId() == 0 )
{
- ok = GroupPoints->SpinBox_DX->isValid( msg, !IsPreview() ) && ok;
- ok = GroupPoints->SpinBox_DY->isValid( msg, !IsPreview() ) && ok;
+ ok = GroupPoints->SpinBox_DX->isValid( msg, !IsPreview() ) &&
+ GroupPoints->SpinBox_DY->isValid( msg, !IsPreview() ) &&
+ ( !GroupPoints->checkBox->isChecked() || GroupPoints->SpinBox_DZ->isValid( msg, !IsPreview() ) ) &&
+ myPoint && myDir;
+ if ( GroupPoints->checkBox->isChecked() &&
+ ( GroupPoints->SpinBox_DZ->value() <= 0. || GroupPoints->SpinBox_DZ->value() >= 360. ) ) {
+ msg += tr("GEOM_CYLINDER_ANGLE_ERR") + "\n";
+ ok = false;
+ }
}
else if( getConstructorId() == 1 )
{
- ok = GroupDimensions->SpinBox_DX->isValid( msg, !IsPreview() ) && ok;
- ok = GroupDimensions->SpinBox_DY->isValid( msg, !IsPreview() ) && ok;
+ ok = GroupDimensions->SpinBox_DX->isValid( msg, !IsPreview() ) &&
+ GroupDimensions->SpinBox_DY->isValid( msg, !IsPreview() ) &&
+ ( !GroupDimensions->checkBox->isChecked() || GroupDimensions->SpinBox_DZ->isValid( msg, !IsPreview() ) );
+ if ( GroupDimensions->checkBox->isChecked() &&
+ ( GroupDimensions->SpinBox_DZ->value() <= 0. || GroupDimensions->SpinBox_DZ->value() >= 360. ) ) {
+ msg += tr("GEOM_CYLINDER_ANGLE_ERR") + "\n";
+ ok = false;
+ }
}
- ok = fabs( getHeight() ) > Precision::Confusion() && ok;
- return getConstructorId() == 0 ? !(myPoint->_is_nil() || myDir->_is_nil()) && ok : ok;
+ ok = qAbs( getHeight() ) > Precision::Confusion() && ok;
+ ok = qAbs( getRadius() ) > Precision::Confusion() && ok;
+ return ok;
}
//=================================================================================
bool PrimitiveGUI_CylinderDlg::execute (ObjectList& objects)
{
bool res = false;
-
+
GEOM::GEOM_Object_var anObj;
+ GEOM::GEOM_I3DPrimOperations_var anOper = GEOM::GEOM_I3DPrimOperations::_narrow(getOperation());
+
switch (getConstructorId()) {
case 0:
- if (!CORBA::is_nil(myPoint) && !CORBA::is_nil(myDir)) {
- anObj = GEOM::GEOM_I3DPrimOperations::_narrow(getOperation())->
- MakeCylinderPntVecRH(myPoint, myDir, getRadius(), getHeight());
+ if ( myPoint && myDir ) {
+ if ( GroupPoints->checkBox->isChecked() ) {
+ anObj = anOper->MakeCylinderPntVecRHA(myPoint.get(), myDir.get(), getRadius(), getHeight(), getAngle()*M_PI/180.);
+ if (!anObj->_is_nil() && !IsPreview())
+ {
+ QStringList aParameters;
+ aParameters << GroupPoints->SpinBox_DX->text();
+ aParameters << GroupPoints->SpinBox_DY->text();
+ aParameters << GroupPoints->SpinBox_DZ->text();
+ anObj->SetParameters(aParameters.join(":").toUtf8().constData());
+ }
+ res = true;
+ }
+ else {
+ anObj = anOper->MakeCylinderPntVecRH(myPoint.get(), myDir.get(), getRadius(), getHeight());
+ if (!anObj->_is_nil() && !IsPreview())
+ {
+ QStringList aParameters;
+ aParameters << GroupPoints->SpinBox_DX->text();
+ aParameters << GroupPoints->SpinBox_DY->text();
+ anObj->SetParameters(aParameters.join(":").toUtf8().constData());
+ }
+ res = true;
+ }
+ }
+ break;
+ case 1:
+ if ( GroupDimensions->checkBox->isChecked() ) {
+ anObj = anOper->MakeCylinderRHA(getRadius(), getHeight(), getAngle()*M_PI/180.);
if (!anObj->_is_nil() && !IsPreview())
{
QStringList aParameters;
- aParameters << GroupPoints->SpinBox_DX->text();
- aParameters << GroupPoints->SpinBox_DY->text();
- anObj->SetParameters(GeometryGUI::JoinObjectParameters(aParameters));
+ aParameters << GroupDimensions->SpinBox_DX->text();
+ aParameters << GroupDimensions->SpinBox_DY->text();
+ aParameters << GroupDimensions->SpinBox_DZ->text();
+ anObj->SetParameters(aParameters.join(":").toUtf8().constData());
}
res = true;
}
- break;
- case 1:
- anObj = GEOM::GEOM_I3DPrimOperations::_narrow(getOperation())->
- MakeCylinderRH(getRadius(), getHeight());
- if (!anObj->_is_nil() && !IsPreview())
- {
- QStringList aParameters;
- aParameters << GroupDimensions->SpinBox_DX->text();
- aParameters << GroupDimensions->SpinBox_DY->text();
- anObj->SetParameters(GeometryGUI::JoinObjectParameters(aParameters));
+ else {
+ anObj = anOper->MakeCylinderRH(getRadius(), getHeight());
+ if (!anObj->_is_nil() && !IsPreview())
+ {
+ QStringList aParameters;
+ aParameters << GroupDimensions->SpinBox_DX->text();
+ aParameters << GroupDimensions->SpinBox_DY->text();
+ anObj->SetParameters(aParameters.join(":").toUtf8().constData());
+ }
+ res = true;
}
- res = true;
break;
}
return 0;
}
+//=================================================================================
+// function : getAngle()
+// purpose :
+//=================================================================================
+double PrimitiveGUI_CylinderDlg::getAngle() const
+{
+ int aConstructorId = getConstructorId();
+ if (aConstructorId == 0)
+ return GroupPoints->SpinBox_DZ->value();
+ else if (aConstructorId == 1)
+ return GroupDimensions->SpinBox_DZ->value();
+ return 0;
+}
+
//=================================================================================
// function : addSubshapeToStudy
// purpose : virtual method to add new SubObjects if local selection
//=================================================================================
void PrimitiveGUI_CylinderDlg::addSubshapesToStudy()
{
- QMap<QString, GEOM::GEOM_Object_var> objMap;
+ if ( getConstructorId() == 0 ) {
+ GEOMBase::PublishSubObject( myPoint.get() );
+ GEOMBase::PublishSubObject( myDir.get() );
+ }
+}
- switch (getConstructorId()) {
- case 0:
- objMap[GroupPoints->LineEdit1->text()] = myPoint;
- objMap[GroupPoints->LineEdit2->text()] = myDir;
- break;
- case 1:
- return;
+//=================================================================================
+// function : getSourceObjects
+// purpose : virtual method to get source objects
+//=================================================================================
+QList<GEOM::GeomObjPtr> PrimitiveGUI_CylinderDlg::getSourceObjects()
+{
+ QList<GEOM::GeomObjPtr> res;
+ res << myPoint << myDir;
+ return res;
+}
+
+//=================================================================================
+// function : ActivateAngle()
+// purpose : enable the
+//=================================================================================
+void PrimitiveGUI_CylinderDlg::ActivateAngle()
+{
+ int aConstructorId = getConstructorId();
+ if (aConstructorId == 0){
+ GroupPoints->SpinBox_DZ->setEnabled( GroupPoints->checkBox->isChecked() );
+ processPreview();
+ }
+ else if (aConstructorId == 1){
+ GroupDimensions->SpinBox_DZ->setEnabled( GroupDimensions->checkBox->isChecked() );
+ processPreview();
}
- addSubshapesToFather(objMap);
}
