#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Tools.h"
+#include "PartSet_Module.h"
+#include "PartSet_PreviewPlanes.h"
#include "SketchPlugin_SketchEntity.h"
#include <XGUI_Selection.h>
#include <XGUI_ViewerProxy.h>
#include <XGUI_ActionsMgr.h>
+#include <XGUI_Tools.h>
#include <XGUI_ModuleConnector.h>
#include <ModuleBase_Operation.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
#include <GeomAPI_XYZ.h>
+#include <GeomAPI_Face.h>
#include <SketchPlugin_Sketch.h>
#include <SketcherPrs_Tools.h>
-#include <BRepClass3d_SolidClassifier.hxx>
#include <Precision.hxx>
#include <gp_Pln.hxx>
#include <gp_Pnt.hxx>
#include <gp_Dir.hxx>
#include <AIS_Shape.hxx>
#include <AIS_DimensionSelectionMode.hxx>
+#include <Bnd_Box.hxx>
#include <Config_WidgetAPI.h>
#include <Config_PropManager.h>
#include <QLabel>
#include <QApplication>
#include <QVBoxLayout>
+#include <QHBoxLayout>
#include <QCheckBox>
+#include <QGroupBox>
+#include <QPushButton>
+#include <QStackedWidget>
+#include <QLineEdit>
+#include <QDoubleValidator>
+#ifndef DBL_MAX
+#define DBL_MAX 1.7976931348623158e+308
+#endif
PartSet_WidgetSketchLabel::PartSet_WidgetSketchLabel(QWidget* theParent,
- ModuleBase_IWorkshop* theWorkshop,
- const Config_WidgetAPI* theData,
- const std::string& theParentId,
- bool toShowConstraints)
-: ModuleBase_WidgetValidated(theParent, theWorkshop, theData, theParentId),
- myPreviewDisplayed(false)
+ ModuleBase_IWorkshop* theWorkshop,
+ const Config_WidgetAPI* theData,
+ const QMap<PartSet_Tools::ConstraintVisibleState, bool>& toShowConstraints)
+: ModuleBase_WidgetValidated(theParent, theWorkshop, theData)
{
- myText = QString::fromStdString(theData->getProperty("title"));
- myLabel = new QLabel("", theParent);
- myLabel->setWordWrap(true);
- myTooltip = QString::fromStdString(theData->getProperty("tooltip"));
- myLabel->setToolTip("");
- myLabel->setIndent(5);
-
QVBoxLayout* aLayout = new QVBoxLayout(this);
ModuleBase_Tools::zeroMargins(aLayout);
- aLayout->addWidget(myLabel);
- myShowConstraints = new QCheckBox(tr("Show constraints"), this);
- aLayout->addWidget(myShowConstraints);
+ myStackWidget = new QStackedWidget(this);
+ myStackWidget->setContentsMargins(0,0,0,0);
+ aLayout->addWidget(myStackWidget);
+
+ // Define label for plane selection
+ QWidget* aFirstWgt = new QWidget(this);
+
+ // Size of the View control
+ mySizeOfViewWidget = new QWidget(aFirstWgt);
+ QHBoxLayout* aSizeLayout = new QHBoxLayout(mySizeOfViewWidget);
+ aSizeLayout->addWidget(new QLabel("Size of the view", aFirstWgt));
+ mySizeOfView = new QLineEdit(aFirstWgt);
+
+ QDoubleValidator* aValidator = new QDoubleValidator(0, DBL_MAX, 12, mySizeOfView);
+ aValidator->setLocale(ModuleBase_Tools::doubleLocale());
+ aValidator->setNotation(QDoubleValidator::StandardNotation);
+ mySizeOfView->setValidator(aValidator);
+ aSizeLayout->addWidget(mySizeOfView);
+
+ QString aText = QString::fromStdString(theData->getProperty("title"));
+ QLabel* aLabel = new QLabel(aText, aFirstWgt);
+ aLabel->setWordWrap(true);
+ QString aTooltip = QString::fromStdString(theData->getProperty("tooltip"));
+ aLabel->setToolTip(aTooltip);
+ aLabel->setIndent(5);
+
+ aLayout = new QVBoxLayout(aFirstWgt);
+ ModuleBase_Tools::zeroMargins(aLayout);
+ aLayout->addWidget(mySizeOfViewWidget);
+ aLayout->addWidget(aLabel);
+
+ myStackWidget->addWidget(aFirstWgt);
+
+ // Define widget for sketch manmagement
+ QWidget* aSecondWgt = new QWidget(this);
+ aLayout = new QVBoxLayout(aSecondWgt);
+ ModuleBase_Tools::zeroMargins(aLayout);
+
+ QGroupBox* aViewBox = new QGroupBox(tr("Sketcher plane"), this);
+ QVBoxLayout* aViewLayout = new QVBoxLayout(aViewBox);
+
+ myViewInverted = new QCheckBox(tr("Reversed"), aViewBox);
+ aViewLayout->addWidget(myViewInverted);
+
+ QPushButton* aSetViewBtn =
+ new QPushButton(QIcon(":icons/plane_view.png"), tr("Set plane view"), aViewBox);
+ connect(aSetViewBtn, SIGNAL(clicked(bool)), this, SLOT(onSetPlaneView()));
+ aViewLayout->addWidget(aSetViewBtn);
+
+ aLayout->addWidget(aViewBox);
+
+ QMap<PartSet_Tools::ConstraintVisibleState, QString> aStates;
+ aStates[PartSet_Tools::Geometrical] = tr("Show geometrical constraints");
+ aStates[PartSet_Tools::Dimensional] = tr("Show dimensional constraints");
+ aStates[PartSet_Tools::Expressions] = tr("Show existing expressions");
- setLayout(aLayout);
- connect(myShowConstraints, SIGNAL(toggled(bool)), this, SIGNAL(showConstraintToggled(bool)));
- myShowConstraints->setChecked(toShowConstraints);
+ QMap<PartSet_Tools::ConstraintVisibleState, QString>::const_iterator anIt = aStates.begin(),
+ aLast = aStates.end();
+ for (; anIt != aLast; anIt++) {
+ QCheckBox* aShowConstraints = new QCheckBox(anIt.value(), this);
+ connect(aShowConstraints, SIGNAL(toggled(bool)), this, SLOT(onShowConstraint(bool)));
+ aLayout->addWidget(aShowConstraints);
+
+ PartSet_Tools::ConstraintVisibleState aState = anIt.key();
+ myShowConstraints[aState] = aShowConstraints;
+
+ if (toShowConstraints.contains(aState))
+ aShowConstraints->setChecked(toShowConstraints[aState]);
+ }
+
+ myStackWidget->addWidget(aSecondWgt);
+ //setLayout(aLayout);
+
+ myPreviewPlanes = new PartSet_PreviewPlanes();
}
PartSet_WidgetSketchLabel::~PartSet_WidgetSketchLabel()
{
}
-bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrs>& theValues,
+bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrsPtr>& theValues,
const bool theToValidate)
{
// do not use the given selection if the plane of the sketch has been already set.
if (plane().get())
return true;
- ModuleBase_ViewerPrs aPrs = theValues.first();
- bool aDone = ModuleBase_WidgetValidated::setSelection(theValues, theToValidate);
+ ModuleBase_ViewerPrsPtr aPrs = theValues.first();
+ bool aDone = setSelectionInternal(theValues, theToValidate);
if (aDone)
updateByPlaneSelected(aPrs);
-
return aDone;
}
QList<QWidget*> PartSet_WidgetSketchLabel::getControls() const
{
QList<QWidget*> aResult;
- aResult << myLabel;
+ aResult << myStackWidget;
return aResult;
}
void PartSet_WidgetSketchLabel::onSelectionChanged()
{
- QList<ModuleBase_ViewerPrs> aSelected = getFilteredSelected();
+ QList<ModuleBase_ViewerPrsPtr> aSelected = getFilteredSelected();
if (aSelected.empty())
return;
- ModuleBase_ViewerPrs aPrs = aSelected.first();
-
- bool aDone = ModuleBase_WidgetValidated::setSelection(aSelected, false);
+ ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
+ bool aDone = setSelectionInternal(aSelected, false);
if (aDone) {
updateByPlaneSelected(aPrs);
updateObject(myFeature);
}
}
-void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrs& thePrs)
+void PartSet_WidgetSketchLabel::onShowConstraint(bool theOn)
+{
+ QCheckBox* aSenderCheckBox = qobject_cast<QCheckBox*>(sender());
+
+ QMap<PartSet_Tools::ConstraintVisibleState, QCheckBox*>::const_iterator
+ anIt = myShowConstraints.begin(), aLast = myShowConstraints.end();
+
+ PartSet_Tools::ConstraintVisibleState aState = PartSet_Tools::Geometrical;
+ bool aFound = false;
+ for (; anIt != aLast && !aFound; anIt++) {
+ aFound = anIt.value() == aSenderCheckBox;
+ if (aFound)
+ aState = anIt.key();
+ }
+ if (aFound)
+ emit showConstraintToggled(aState, theOn);
+}
+
+void PartSet_WidgetSketchLabel::blockAttribute(const AttributePtr& theAttribute,
+ const bool& theToBlock, bool& isFlushesActived,
+ bool& isAttributeSetInitializedBlocked)
+{
+ ModuleBase_WidgetValidated::blockAttribute(theAttribute, theToBlock, isFlushesActived,
+ isAttributeSetInitializedBlocked);
+ // We do not restore the previous state of isAttributeSetInitializedBlocked for each of
+ // attributes. It it is necessary, these states should be append to the method attributes
+ // or stored in the widget
+
+ std::list<AttributePtr> anAttributes = myFeature->data()->attributes("");
+ std::list<AttributePtr>::const_iterator anIt = anAttributes.begin(), aLast = anAttributes.end();
+ QStringList aValues;
+ for(; anIt != aLast; anIt++) {
+ AttributePtr anAttribute = *anIt;
+ if (theToBlock)
+ anAttribute->blockSetInitialized(true);
+ else
+ anAttribute->blockSetInitialized(isAttributeSetInitializedBlocked);
+ }
+}
+
+bool PartSet_WidgetSketchLabel::setSelectionInternal(
+ const QList<ModuleBase_ViewerPrsPtr>& theValues,
+ const bool theToValidate)
+{
+ bool aDone = false;
+ if (theValues.empty()) {
+ // In order to make reselection possible, set empty object and shape should be done
+ setSelectionCustom(std::shared_ptr<ModuleBase_ViewerPrs>(
+ new ModuleBase_ViewerPrs(ObjectPtr(), GeomShapePtr(), NULL)));
+ aDone = false;
+ }
+ else {
+ // it removes the processed value from the parameters list
+ ModuleBase_ViewerPrsPtr aValue = theValues.first();//.takeFirst();
+ if (!theToValidate || isValidInFilters(aValue))
+ aDone = setSelectionCustom(aValue);
+ }
+
+ return aDone;
+}
+
+void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrsPtr& thePrs)
{
// 1. hide main planes if they have been displayed
- erasePreviewPlanes();
+ myPreviewPlanes->erasePreviewPlanes(myWorkshop);
// 2. if the planes were displayed, change the view projection
- TopoDS_Shape aShape = thePrs.shape();
+ const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Shape> aGShape;
std::shared_ptr<GeomAPI_Shape> aBaseShape;
(aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
// selection happens in OCC viewer
- if (!aShape.IsNull()) {
- aGShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape());
- aGShape->setImpl(new TopoDS_Shape(aShape));
+ if (aShape.get() && !aShape->isNull()) {
+ aGShape = aShape;
if (aSelAttr && aSelAttr->context()) {
aBaseShape = aSelAttr->context()->shape();
}
if (aGShape.get() != NULL) {
// get plane parameters
- std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
+ std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
+ std::shared_ptr<GeomAPI_Pln> aPlane = aFace->getPlane();
std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
double aTwist = 0.0;
- // orienting projection
- if(aBaseShape.get() != NULL) {
- std::shared_ptr<GeomAPI_Pnt> aCenterPnt = GeomAlgoAPI_ShapeTools::centreOfMass(aGShape);
- gp_Pnt aPnt = aCenterPnt->impl<gp_Pnt>();
- aPnt.Translate(aDir->impl<gp_Dir>().XYZ() * (10 * Precision::Confusion()));
-
- BRepClass3d_SolidClassifier aClassifier;
- aClassifier.Load(aBaseShape->impl<TopoDS_Shape>());
- aClassifier.Perform(aPnt, Precision::Confusion());
-
- if(aClassifier.State() == TopAbs_IN) {
- aXYZ.Reverse();
+ // orienting projection is not needed: it is done in GeomAlgoAPI_FaceBuilder::plane
+ /*if (aGShape->impl<TopoDS_Shape>().Orientation() == TopAbs_REVERSED) {
+ aXYZ.Reverse();
+ }*/
+
+ // Rotate view if the sketcher plane is selected only from preview planes
+ // Preview planes are created only if there is no any shape
+ bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane", "false");
+ if (aRotate) {
+ myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
+ if (aModule)
+ aModule->onViewTransformed();
+ }
+ QString aSizeOfViewStr = mySizeOfView->text();
+ if (!aSizeOfViewStr.isEmpty()) {
+ bool isOk;
+ double aSizeOfView = aSizeOfViewStr.toDouble(&isOk);
+ if (isOk && aSizeOfView > 0) {
+ Handle(V3d_View) aView3d = myWorkshop->viewer()->activeView();
+ if (!aView3d.IsNull()) {
+ Bnd_Box aBndBox;
+ double aHalfSize = aSizeOfView/2.0;
+ aBndBox.Update(-aHalfSize, -aHalfSize, -aHalfSize, aHalfSize, aHalfSize, aHalfSize);
+ aView3d->FitAll(aBndBox, 0.01, false);
+ }
}
}
-
- myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
}
// 3. Clear text in the label
- myLabel->setText("");
- myLabel->setToolTip("");
- disconnect(workshop()->selector(), SIGNAL(selectionChanged()),
+ myStackWidget->setCurrentIndex(1);
+ //myLabel->setText("");
+ //myLabel->setToolTip("");
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
+ disconnect(aWorkshop->selector(), SIGNAL(selectionChanged()),
this, SLOT(onSelectionChanged()));
// 4. deactivate face selection filter
activateFilters(false);
// 5. Clear selection mode and define sketching mode
- //XGUI_Displayer* aDisp = workshop()->displayer();
+ //XGUI_Displayer* aDisp = aWorkshop->displayer();
//aDisp->closeLocalContexts();
emit planeSelected(plane());
// after the plane is selected in the sketch, the sketch selection should be activated
activateSelection(true);
// 6. Update sketcher actions
- XGUI_ActionsMgr* anActMgr = workshop()->actionsMgr();
- anActMgr->update();
+ XGUI_ActionsMgr* anActMgr = aWorkshop->actionsMgr();
+ myWorkshop->updateCommandStatus();
myWorkshop->viewer()->update();
}
bool PartSet_WidgetSketchLabel::focusTo()
{
- myLabel->setFocus();
+ ModuleBase_Tools::setFocus(myStackWidget, "PartSet_WidgetSketchLabel::focusTo()");
return true;
}
void PartSet_WidgetSketchLabel::enableFocusProcessing()
{
- myLabel->installEventFilter(this);
+ myStackWidget->installEventFilter(this);
}
-void PartSet_WidgetSketchLabel::storeAttributeValue()
+void PartSet_WidgetSketchLabel::storeAttributeValue(const AttributePtr& theAttribute)
{
- ModuleBase_WidgetValidated::storeAttributeValue();
+ ModuleBase_WidgetValidated::storeAttributeValue(theAttribute);
}
-void PartSet_WidgetSketchLabel::restoreAttributeValue(const bool theValid)
+void PartSet_WidgetSketchLabel::restoreAttributeValue(const AttributePtr& theAttribute,
+ const bool theValid)
{
- ModuleBase_WidgetValidated::restoreAttributeValue(theValid);
+ ModuleBase_WidgetValidated::restoreAttributeValue(theAttribute, theValid);
// it is not necessary to save the previous plane value because the plane is chosen once
DataPtr aData = feature()->data();
}
}
-bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrs& thePrs)
+bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrsPtr& thePrs)
+{
+ return fillSketchPlaneBySelection(feature(), thePrs);
+}
+
+bool PartSet_WidgetSketchLabel::canFillSketch(const ModuleBase_ViewerPrsPtr& thePrs)
+{
+ bool aCanFillSketch = true;
+ // avoid any selection on sketch object
+ ObjectPtr anObject = thePrs->object();
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
+ if (aResult.get()) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aResult);
+ if (aFeature->getKind() == SketchPlugin_Sketch::ID())
+ aCanFillSketch = false;
+ }
+ // check plane or planar face of any non-sketch object
+ if (aCanFillSketch) {
+ std::shared_ptr<GeomAPI_Face> aGeomFace;
+
+ GeomShapePtr aGeomShape = thePrs->shape();
+ if ((!aGeomShape.get() || aGeomShape->isNull()) && aResult.get()) {
+ aGeomShape = aResult->shape();
+ }
+
+ if (aGeomShape.get() && aGeomShape->shapeType() == GeomAPI_Shape::FACE) {
+ std::shared_ptr<GeomAPI_Face> aGeomFace(new GeomAPI_Face(aGeomShape));
+ aCanFillSketch = aGeomFace.get() && aGeomFace->isPlanar();
+ }
+ else
+ aCanFillSketch = false;
+ }
+ return aCanFillSketch;
+}
+
+bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const FeaturePtr& theFeature,
+ const ModuleBase_ViewerPrsPtr& thePrs)
{
bool isOwnerSet = false;
- const TopoDS_Shape& aShape = thePrs.shape();
+ const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Dir> aDir;
- if (thePrs.object() && (feature() != thePrs.object())) {
- DataPtr aData = feature()->data();
- AttributeSelectionPtr aSelAttr =
+ if (thePrs->object() && (theFeature != thePrs->object())) {
+ DataPtr aData = theFeature->data();
+ AttributeSelectionPtr aSelAttr =
std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
(aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
if (aSelAttr) {
- ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs.object());
+ ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs->object());
if (aRes) {
GeomShapePtr aShapePtr(new GeomAPI_Shape());
- if (aShape.IsNull()) { // selection happens in the OCC viewer
+ if (!aShape.get() || aShape->isNull()) { // selection happens in the OCC viewer
aShapePtr = ModelAPI_Tools::shape(aRes);
}
else { // selection happens in OB browser
- aShapePtr->setImpl(new TopoDS_Shape(aShape));
+ aShapePtr = aShape;
}
if (aShapePtr.get() != NULL) {
aSelAttr->setValue(aRes, aShapePtr);
}
}
}
- else if (!aShape.IsNull()) {
- aDir = setSketchPlane(aShape);
+ else if (aShape.get() && !aShape->isNull()) {
+ const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
+ aDir = setSketchPlane(theFeature, aTDShape);
isOwnerSet = aDir.get();
}
return isOwnerSet;
{
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
if (aPlane.get()) {
+ myStackWidget->setCurrentIndex(1);
activateSelection(true);
return;
}
- bool aBodyIsVisualized = false;
- XGUI_Displayer* aDisp = workshop()->displayer();
- QObjectPtrList aDisplayed = aDisp->displayedObjects();
- foreach (ObjectPtr anObj, aDisplayed) {
- ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
- if (aResult.get() != NULL) {
- aBodyIsVisualized = aResult->groupName() == ModelAPI_ResultBody::group();
- if (aBodyIsVisualized)
- break;
- }
- }
+ myStackWidget->setCurrentIndex(0);
+ bool aBodyIsVisualized = myPreviewPlanes->hasVisualizedBodies(myWorkshop);
+
+ // Clear previous selection mode It is necessary for correct activation of preview planes
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
+ XGUI_Displayer* aDisp = aWorkshop->displayer();
+ aDisp->activateObjects(QIntList(), aDisp->displayedObjects(), false);
if (!aBodyIsVisualized) {
// We have to select a plane before any operation
- showPreviewPlanes();
+ myPreviewPlanes->showPreviewPlanes(myWorkshop);
+ mySizeOfViewWidget->setVisible(true);
}
+ else
+ mySizeOfViewWidget->setVisible(false);
+
activateSelection(true);
- myLabel->setText(myText);
- myLabel->setToolTip(myTooltip);
+ //myLabel->setText(myText);
+ //myLabel->setToolTip(myTooltip);
- connect(workshop()->selector(), SIGNAL(selectionChanged()), this, SLOT(onSelectionChanged()));
+ connect(XGUI_Tools::workshop(myWorkshop)->selector(), SIGNAL(selectionChanged()),
+ this, SLOT(onSelectionChanged()));
activateFilters(true);
-
- aDisp->updateViewer();
}
void PartSet_WidgetSketchLabel::deactivate()
{
- erasePreviewPlanes();
+ ModuleBase_ModelWidget::deactivate();
+ bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
+ myPreviewPlanes->erasePreviewPlanes(myWorkshop);
activateSelection(false);
activateFilters(false);
+ if (aHidePreview)
+ myWorkshop->viewer()->update();
}
void PartSet_WidgetSketchLabel::activateSelection(bool toActivate)
}
}
-void PartSet_WidgetSketchLabel::erasePreviewPlanes()
-{
- if (myPreviewDisplayed) {
- XGUI_Displayer* aDisp = workshop()->displayer();
- aDisp->eraseAIS(myYZPlane, false);
- aDisp->eraseAIS(myXZPlane, false);
- aDisp->eraseAIS(myXYPlane, false);
- myPreviewDisplayed = false;
- }
-}
-
-void PartSet_WidgetSketchLabel::showPreviewPlanes()
-{
- if (myPreviewDisplayed)
- return;
-
- if (!myYZPlane) { // If planes are not created
- // Create Preview
- std::shared_ptr<GeomAPI_Pnt> anOrigin(new GeomAPI_Pnt(0, 0, 0));
- std::shared_ptr<GeomAPI_Dir> aYZDir(new GeomAPI_Dir(1, 0, 0));
- std::shared_ptr<GeomAPI_Dir> aXZDir(new GeomAPI_Dir(0, 1, 0));
- std::shared_ptr<GeomAPI_Dir> aXYDir(new GeomAPI_Dir(0, 0, 1));
-
- std::vector<int> aYZRGB, aXZRGB, aXYRGB;
- aYZRGB = Config_PropManager::color("Visualization", "yz_plane_color",
- YZ_PLANE_COLOR);
- aXZRGB = Config_PropManager::color("Visualization", "xz_plane_color",
- XZ_PLANE_COLOR);
- aXYRGB = Config_PropManager::color("Visualization", "xy_plane_color",
- XY_PLANE_COLOR);
- int aR[] = {aYZRGB[0], aYZRGB[1], aYZRGB[2]};
- int aG[] = {aXZRGB[0], aXZRGB[1], aXZRGB[2]};
- int aB[] = {aXYRGB[0], aXYRGB[1], aXYRGB[2]};
-
- myYZPlane = createPreviewPlane(anOrigin, aYZDir, aR);
- myXZPlane = createPreviewPlane(anOrigin, aXZDir, aG);
- myXYPlane = createPreviewPlane(anOrigin, aXYDir, aB);
- }
- XGUI_Displayer* aDisp = workshop()->displayer();
- aDisp->displayAIS(myYZPlane, true, false);
- aDisp->displayAIS(myXZPlane, true, false);
- aDisp->displayAIS(myXYPlane, true, false);
- myPreviewDisplayed = true;
-}
-
-AISObjectPtr PartSet_WidgetSketchLabel::createPreviewPlane(std::shared_ptr<GeomAPI_Pnt> theOrigin,
- std::shared_ptr<GeomAPI_Dir> theNorm,
- const int theRGB[3])
-{
- double aSize = Config_PropManager::integer("Sketch planes", "planes_size", PLANE_SIZE);
- std::shared_ptr<GeomAPI_Shape> aFace = GeomAlgoAPI_FaceBuilder::square(theOrigin, theNorm, aSize);
- AISObjectPtr aAIS = AISObjectPtr(new GeomAPI_AISObject());
- aAIS->createShape(aFace);
- aAIS->setWidth(Config_PropManager::integer("Sketch planes", "planes_thickness", SKETCH_WIDTH));
- aAIS->setColor(theRGB[0], theRGB[1], theRGB[2]);
- return aAIS;
-}
-
-
-std::shared_ptr<GeomAPI_Dir> PartSet_WidgetSketchLabel::setSketchPlane(const TopoDS_Shape& theShape)
+std::shared_ptr<GeomAPI_Dir> PartSet_WidgetSketchLabel::setSketchPlane(const FeaturePtr& theFeature,
+ const TopoDS_Shape& theShape)
{
if (theShape.IsNull())
return std::shared_ptr<GeomAPI_Dir>();
// get plane parameters
- std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
+ std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
+ std::shared_ptr<GeomAPI_Pln> aPlane = aFace->getPlane();
+ if (!aPlane.get())
+ return std::shared_ptr<GeomAPI_Dir>();
// set plane parameters to feature
- std::shared_ptr<ModelAPI_Data> aData = feature()->data();
+ std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
double anA, aB, aC, aD;
aPlane->coefficients(anA, aB, aC, aD);
return aDir;
}
-void PartSet_WidgetSketchLabel::showConstraints(bool theOn)
+void PartSet_WidgetSketchLabel::onSetPlaneView()
{
- myShowConstraints->setChecked(theOn);
- emit showConstraintToggled(theOn);
-}
-
-XGUI_Workshop* PartSet_WidgetSketchLabel::workshop() const
-{
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
- return aConnector->workshop();
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (aPlane.get()) {
+ std::shared_ptr<GeomAPI_Dir> aDirection = aPlane->direction();
+ gp_Dir aDir = aDirection->impl<gp_Dir>();
+ if (myViewInverted->isChecked())
+ aDir.Reverse();
+ myWorkshop->viewer()->setViewProjection(aDir.X(), aDir.Y(), aDir.Z(), 0.);
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
+ if (aModule)
+ aModule->onViewTransformed();
+ }
}
