#include <ModelAPI_Tools.h>
#include <GeomAlgoAPI_FaceBuilder.h>
+#include <GeomAlgoAPI_ShapeTools.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
#include <GeomAPI_XYZ.h>
PartSet_WidgetSketchLabel::PartSet_WidgetSketchLabel(QWidget* theParent,
+ ModuleBase_IWorkshop* theWorkshop,
const Config_WidgetAPI* theData,
const std::string& theParentId,
bool toShowConstraints)
- : ModuleBase_WidgetValidated(theParent, theData, theParentId),
- myPreviewDisplayed(false),
- myWorkshop(NULL)
+: ModuleBase_WidgetValidated(theParent, theWorkshop, theData, theParentId),
+ myPreviewDisplayed(false)
{
myText = QString::fromStdString(theData->getProperty("title"));
myLabel = new QLabel("", theParent);
PartSet_WidgetSketchLabel::~PartSet_WidgetSketchLabel()
{
- erasePreviewPlanes();
}
-bool PartSet_WidgetSketchLabel::setSelection(const QList<ModuleBase_ViewerPrs>& theValues, int& thePosition)
+bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrs>& theValues,
+ const bool theToValidate)
{
// do not use the given selection if the plane of the sketch has been already set.
// If this check is absent, a selected plane in the viewer can be set in the sketch
if (plane().get())
return true;
- return ModuleBase_WidgetValidated::setSelection(theValues, thePosition);
+ ModuleBase_ViewerPrs aPrs = theValues.first();
+ bool aDone = ModuleBase_WidgetValidated::setSelection(theValues, theToValidate);
+ if (aDone)
+ updateByPlaneSelected(aPrs);
+
+ return aDone;
}
QList<QWidget*> PartSet_WidgetSketchLabel::getControls() const
void PartSet_WidgetSketchLabel::onSelectionChanged()
{
- QList<ModuleBase_ViewerPrs> aSelectedPrs = getSelectedEntitiesOrObjects(
- myWorkshop->selector()->selection());
- if (aSelectedPrs.empty())
- return;
- ModuleBase_ViewerPrs aPrs = aSelectedPrs.first();
- if (aPrs.isEmpty() || !isValidSelection(aPrs))
+ QList<ModuleBase_ViewerPrs> aSelected = getFilteredSelected();
+
+ if (aSelected.empty())
return;
+ ModuleBase_ViewerPrs aPrs = aSelected.first();
- // 2. set the selection to sketch
- setSelectionCustom(aPrs);
- // 3. hide main planes if they have been displayed
+ bool aDone = ModuleBase_WidgetValidated::setSelection(aSelected, false);
+ if (aDone) {
+ updateByPlaneSelected(aPrs);
+ updateObject(myFeature);
+ }
+}
+
+void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrs& thePrs)
+{
+ // 1. hide main planes if they have been displayed
erasePreviewPlanes();
- // 4. if the planes were displayed, change the view projection
- TopoDS_Shape aShape = aPrs.shape();
+ // 2. if the planes were displayed, change the view projection
+ TopoDS_Shape aShape = thePrs.shape();
std::shared_ptr<GeomAPI_Shape> aGShape;
+ std::shared_ptr<GeomAPI_Shape> aBaseShape;
+
+ DataPtr aData = feature()->data();
+ AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+
// selection happens in OCC viewer
if (!aShape.IsNull()) {
- aGShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape);
+ aGShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape());
aGShape->setImpl(new TopoDS_Shape(aShape));
+
+ if (aSelAttr && aSelAttr->context()) {
+ aBaseShape = aSelAttr->context()->shape();
+ }
}
else { // selection happens in OCC viewer(on body) of in the OB browser
- DataPtr aData = feature()->data();
- AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
- (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
if (aSelAttr) {
aGShape = aSelAttr->value();
}
// get plane parameters
std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
+ gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
+ double aTwist = 0.0;
+
+ // orienting projection is not needed: it is done in GeomAlgoAPI_FaceBuilder::plane
+ /*if (aGShape->impl<TopoDS_Shape>().Orientation() == TopAbs_REVERSED) {
+ aXYZ.Reverse();
+ }*/
- myWorkshop->viewer()->setViewProjection(aDir->x(), aDir->y(), aDir->z());
+ myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
}
- // 5. Clear text in the label
+ // 3. Clear text in the label
myLabel->setText("");
myLabel->setToolTip("");
- disconnect(myWorkshop->selector(), SIGNAL(selectionChanged()),
+ disconnect(workshop()->selector(), SIGNAL(selectionChanged()),
this, SLOT(onSelectionChanged()));
- // 6. deactivate face selection filter
- activateFilters(myWorkshop->module()->workshop(), false);
+ // 4. deactivate face selection filter
+ activateFilters(false);
- // 7. Clear selection mode and define sketching mode
- //XGUI_Displayer* aDisp = myWorkshop->displayer();
+ // 5. Clear selection mode and define sketching mode
+ //XGUI_Displayer* aDisp = workshop()->displayer();
//aDisp->closeLocalContexts();
emit planeSelected(plane());
// after the plane is selected in the sketch, the sketch selection should be activated
// the selection by any label deactivation, but need to switch it off by stop the sketch
activateSelection(true);
- // 8. Update sketcher actions
- XGUI_ActionsMgr* anActMgr = myWorkshop->actionsMgr();
+ // 6. Update sketcher actions
+ XGUI_ActionsMgr* anActMgr = workshop()->actionsMgr();
anActMgr->update();
myWorkshop->viewer()->update();
}
{
CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
return PartSet_Tools::sketchPlane(aSketch);
-
}
bool PartSet_WidgetSketchLabel::focusTo()
void PartSet_WidgetSketchLabel::storeAttributeValue()
{
+ ModuleBase_WidgetValidated::storeAttributeValue();
}
void PartSet_WidgetSketchLabel::restoreAttributeValue(const bool theValid)
{
+ ModuleBase_WidgetValidated::restoreAttributeValue(theValid);
+
// it is not necessary to save the previous plane value because the plane is chosen once
DataPtr aData = feature()->data();
AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
}
bool aBodyIsVisualized = false;
- XGUI_Displayer* aDisp = myWorkshop->displayer();
+ XGUI_Displayer* aDisp = workshop()->displayer();
QObjectPtrList aDisplayed = aDisp->displayedObjects();
foreach (ObjectPtr anObj, aDisplayed) {
ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
myLabel->setText(myText);
myLabel->setToolTip(myTooltip);
- connect(myWorkshop->selector(), SIGNAL(selectionChanged()), this, SLOT(onSelectionChanged()));
- activateFilters(myWorkshop->module()->workshop(), true);
+ connect(workshop()->selector(), SIGNAL(selectionChanged()), this, SLOT(onSelectionChanged()));
+ activateFilters(true);
aDisp->updateViewer();
}
erasePreviewPlanes();
activateSelection(false);
- activateFilters(myWorkshop->module()->workshop(), false);
+ activateFilters(false);
}
void PartSet_WidgetSketchLabel::activateSelection(bool toActivate)
QIntList aModes;
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
if (aPlane.get()) {
- myWorkshop->moduleConnector()->module()->activeSelectionModes(aModes);
+ myWorkshop->module()->activeSelectionModes(aModes);
}
else {
aModes << TopAbs_FACE;
}
- myWorkshop->moduleConnector()->activateSubShapesSelection(aModes);
+ myWorkshop->activateSubShapesSelection(aModes);
} else {
- myWorkshop->moduleConnector()->deactivateSubShapesSelection();
+ myWorkshop->deactivateSubShapesSelection();
}
}
void PartSet_WidgetSketchLabel::erasePreviewPlanes()
{
if (myPreviewDisplayed) {
- XGUI_Displayer* aDisp = myWorkshop->displayer();
+ XGUI_Displayer* aDisp = workshop()->displayer();
aDisp->eraseAIS(myYZPlane, false);
aDisp->eraseAIS(myXZPlane, false);
aDisp->eraseAIS(myXYPlane, false);
// Create Preview
std::shared_ptr<GeomAPI_Pnt> anOrigin(new GeomAPI_Pnt(0, 0, 0));
std::shared_ptr<GeomAPI_Dir> aYZDir(new GeomAPI_Dir(1, 0, 0));
- std::shared_ptr<GeomAPI_Dir> aXZDir(new GeomAPI_Dir(0, 1, 0));
+ // -1, not 1 for correct internal sketch coords (issue 898)
+ std::shared_ptr<GeomAPI_Dir> aXZDir(new GeomAPI_Dir(0, -1, 0));
std::shared_ptr<GeomAPI_Dir> aXYDir(new GeomAPI_Dir(0, 0, 1));
std::vector<int> aYZRGB, aXZRGB, aXYRGB;
myXZPlane = createPreviewPlane(anOrigin, aXZDir, aG);
myXYPlane = createPreviewPlane(anOrigin, aXYDir, aB);
}
- XGUI_Displayer* aDisp = myWorkshop->displayer();
- aDisp->displayAIS(myYZPlane, false);
- aDisp->displayAIS(myXZPlane, false);
- aDisp->displayAIS(myXYPlane, false);
+ XGUI_Displayer* aDisp = workshop()->displayer();
+ aDisp->displayAIS(myYZPlane, true, false);
+ aDisp->displayAIS(myXZPlane, true, false);
+ aDisp->displayAIS(myXYPlane, true, false);
myPreviewDisplayed = true;
}
myShowConstraints->setChecked(theOn);
emit showConstraintToggled(theOn);
}
+
+XGUI_Workshop* PartSet_WidgetSketchLabel::workshop() const
+{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ return aConnector->workshop();
+}