#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Tools.h"
#include "PartSet_Module.h"
+#include "PartSet_PreviewPlanes.h"
#include "SketchPlugin_SketchEntity.h"
#include <XGUI_Selection.h>
#include <XGUI_ViewerProxy.h>
#include <XGUI_ActionsMgr.h>
+#include <XGUI_Tools.h>
#include <XGUI_ModuleConnector.h>
#include <ModuleBase_Operation.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
#include <GeomAPI_XYZ.h>
+#include <GeomAPI_Face.h>
#include <SketchPlugin_Sketch.h>
#include <SketcherPrs_Tools.h>
ModuleBase_IWorkshop* theWorkshop,
const Config_WidgetAPI* theData,
const QMap<PartSet_Tools::ConstraintVisibleState, bool>& toShowConstraints)
-: ModuleBase_WidgetValidated(theParent, theWorkshop, theData),
- myPreviewDisplayed(false)
+: ModuleBase_WidgetValidated(theParent, theWorkshop, theData)
{
QVBoxLayout* aLayout = new QVBoxLayout(this);
ModuleBase_Tools::zeroMargins(aLayout);
myStackWidget->addWidget(aSecondWgt);
//setLayout(aLayout);
+
+ myPreviewPlanes = new PartSet_PreviewPlanes();
}
PartSet_WidgetSketchLabel::~PartSet_WidgetSketchLabel()
{
}
-bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrs>& theValues,
+bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrsPtr>& theValues,
const bool theToValidate)
{
// do not use the given selection if the plane of the sketch has been already set.
if (plane().get())
return true;
- ModuleBase_ViewerPrs aPrs = theValues.first();
- bool aDone = ModuleBase_WidgetValidated::setSelection(theValues, theToValidate);
+ ModuleBase_ViewerPrsPtr aPrs = theValues.first();
+ bool aDone = setSelectionInternal(theValues, theToValidate);
if (aDone)
updateByPlaneSelected(aPrs);
-
return aDone;
}
void PartSet_WidgetSketchLabel::onSelectionChanged()
{
- QList<ModuleBase_ViewerPrs> aSelected = getFilteredSelected();
+ QList<ModuleBase_ViewerPrsPtr> aSelected = getFilteredSelected();
if (aSelected.empty())
return;
- ModuleBase_ViewerPrs aPrs = aSelected.first();
-
- bool aDone = ModuleBase_WidgetValidated::setSelection(aSelected, false);
+ ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
+ bool aDone = setSelectionInternal(aSelected, false);
if (aDone) {
updateByPlaneSelected(aPrs);
updateObject(myFeature);
emit showConstraintToggled(aState, theOn);
}
-void PartSet_WidgetSketchLabel::blockAttribute(const bool& theToBlock, bool& isFlushesActived,
+void PartSet_WidgetSketchLabel::blockAttribute(const AttributePtr& theAttribute,
+ const bool& theToBlock, bool& isFlushesActived,
bool& isAttributeSetInitializedBlocked)
{
- ModuleBase_WidgetValidated::blockAttribute(theToBlock, isFlushesActived,
+ ModuleBase_WidgetValidated::blockAttribute(theAttribute, theToBlock, isFlushesActived,
isAttributeSetInitializedBlocked);
// We do not restore the previous state of isAttributeSetInitializedBlocked for each of
// attributes. It it is necessary, these states should be append to the method attributes
}
}
-void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrs& thePrs)
+bool PartSet_WidgetSketchLabel::setSelectionInternal(const QList<ModuleBase_ViewerPrsPtr>& theValues,
+ const bool theToValidate)
+{
+ bool aDone = false;
+ if (theValues.empty()) {
+ // In order to make reselection possible, set empty object and shape should be done
+ setSelectionCustom(std::shared_ptr<ModuleBase_ViewerPrs>(
+ new ModuleBase_ViewerPrs(ObjectPtr(), GeomShapePtr(), NULL)));
+ aDone = false;
+ }
+ else {
+ // it removes the processed value from the parameters list
+ ModuleBase_ViewerPrsPtr aValue = theValues.first();//.takeFirst();
+ if (!theToValidate || isValidInFilters(aValue))
+ aDone = setSelectionCustom(aValue);
+ }
+
+ return aDone;
+}
+
+void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrsPtr& thePrs)
{
// 1. hide main planes if they have been displayed
- erasePreviewPlanes();
+ myPreviewPlanes->erasePreviewPlanes(myWorkshop);
// 2. if the planes were displayed, change the view projection
- const GeomShapePtr& aShape = thePrs.shape();
+ const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Shape> aGShape;
std::shared_ptr<GeomAPI_Shape> aBaseShape;
}
if (aGShape.get() != NULL) {
// get plane parameters
- std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
+ std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
+ std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aFace);
std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
double aTwist = 0.0;
myStackWidget->setCurrentIndex(1);
//myLabel->setText("");
//myLabel->setToolTip("");
- disconnect(workshop()->selector(), SIGNAL(selectionChanged()),
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
+ disconnect(aWorkshop->selector(), SIGNAL(selectionChanged()),
this, SLOT(onSelectionChanged()));
// 4. deactivate face selection filter
activateFilters(false);
// 5. Clear selection mode and define sketching mode
- //XGUI_Displayer* aDisp = workshop()->displayer();
+ //XGUI_Displayer* aDisp = aWorkshop->displayer();
//aDisp->closeLocalContexts();
emit planeSelected(plane());
// after the plane is selected in the sketch, the sketch selection should be activated
activateSelection(true);
// 6. Update sketcher actions
- XGUI_ActionsMgr* anActMgr = workshop()->actionsMgr();
+ XGUI_ActionsMgr* anActMgr = aWorkshop->actionsMgr();
myWorkshop->updateCommandStatus();
myWorkshop->viewer()->update();
}
myStackWidget->installEventFilter(this);
}
-void PartSet_WidgetSketchLabel::storeAttributeValue()
+void PartSet_WidgetSketchLabel::storeAttributeValue(const AttributePtr& theAttribute)
{
- ModuleBase_WidgetValidated::storeAttributeValue();
+ ModuleBase_WidgetValidated::storeAttributeValue(theAttribute);
}
-void PartSet_WidgetSketchLabel::restoreAttributeValue(const bool theValid)
+void PartSet_WidgetSketchLabel::restoreAttributeValue(const AttributePtr& theAttribute,
+ const bool theValid)
{
- ModuleBase_WidgetValidated::restoreAttributeValue(theValid);
+ ModuleBase_WidgetValidated::restoreAttributeValue(theAttribute, theValid);
// it is not necessary to save the previous plane value because the plane is chosen once
DataPtr aData = feature()->data();
}
}
-bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrs& thePrs)
+bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrsPtr& thePrs)
{
return fillSketchPlaneBySelection(feature(), thePrs);
}
-#include <GeomAPI_Face.h>
-bool PartSet_WidgetSketchLabel::canFillSketch(const ModuleBase_ViewerPrs& thePrs)
+bool PartSet_WidgetSketchLabel::canFillSketch(const ModuleBase_ViewerPrsPtr& thePrs)
{
bool aCanFillSketch = true;
// avoid any selection on sketch object
- ObjectPtr anObject = thePrs.object();
+ ObjectPtr anObject = thePrs->object();
ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
if (aResult.get()) {
FeaturePtr aFeature = ModelAPI_Feature::feature(aResult);
}
// check plane or planar face of any non-sketch object
if (aCanFillSketch) {
- const TopoDS_Shape aShape = thePrs.shape();
- if (aShape.ShapeType() == TopAbs_FACE) {
- std::shared_ptr<GeomAPI_Face> aGeomFace(new GeomAPI_Face());
- aGeomFace->setImpl(new TopoDS_Shape(aShape));
+ std::shared_ptr<GeomAPI_Face> aGeomFace;
+
+ GeomShapePtr aGeomShape = thePrs->shape();
+ if ((!aGeomShape.get() || aGeomShape->isNull()) && aResult.get()) {
+ aGeomShape = aResult->shape();
+ }
+
+ if (aGeomShape.get() && aGeomShape->shapeType() == GeomAPI_Shape::FACE) {
+ std::shared_ptr<GeomAPI_Face> aGeomFace(new GeomAPI_Face(aGeomShape));
aCanFillSketch = aGeomFace.get() && aGeomFace->isPlanar();
}
else
}
bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const FeaturePtr& theFeature,
- const ModuleBase_ViewerPrs& thePrs)
+ const ModuleBase_ViewerPrsPtr& thePrs)
{
bool isOwnerSet = false;
- const GeomShapePtr& aShape = thePrs.shape();
+ const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Dir> aDir;
- if (thePrs.object() && (theFeature != thePrs.object())) {
+ if (thePrs->object() && (theFeature != thePrs->object())) {
DataPtr aData = theFeature->data();
AttributeSelectionPtr aSelAttr =
std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
(aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
if (aSelAttr) {
- ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs.object());
+ ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs->object());
if (aRes) {
GeomShapePtr aShapePtr(new GeomAPI_Shape());
if (!aShape.get() || aShape->isNull()) { // selection happens in the OCC viewer
}
else if (aShape.get() && !aShape->isNull()) {
const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
- aDir = setSketchPlane(aTDShape);
+ aDir = setSketchPlane(theFeature, aTDShape);
isOwnerSet = aDir.get();
}
return isOwnerSet;
}
myStackWidget->setCurrentIndex(0);
- bool aBodyIsVisualized = false;
- XGUI_Displayer* aDisp = workshop()->displayer();
- QObjectPtrList aDisplayed = aDisp->displayedObjects();
- foreach (ObjectPtr anObj, aDisplayed) {
- ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
- if (aResult.get() != NULL) {
- aBodyIsVisualized = aResult->groupName() == ModelAPI_ResultBody::group();
- if (aBodyIsVisualized)
- break;
- }
- }
+ bool aBodyIsVisualized = myPreviewPlanes->hasVisualizedBodies(myWorkshop);
+
+ // Clear previous selection mode It is necessary for correct activation of preview planes
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
+ XGUI_Displayer* aDisp = aWorkshop->displayer();
+ aDisp->activateObjects(QIntList(), aDisp->displayedObjects(), false);
if (!aBodyIsVisualized) {
// We have to select a plane before any operation
- showPreviewPlanes();
+ myPreviewPlanes->showPreviewPlanes(myWorkshop);
}
activateSelection(true);
//myLabel->setText(myText);
//myLabel->setToolTip(myTooltip);
- connect(workshop()->selector(), SIGNAL(selectionChanged()), this, SLOT(onSelectionChanged()));
+ connect(XGUI_Tools::workshop(myWorkshop)->selector(), SIGNAL(selectionChanged()),
+ this, SLOT(onSelectionChanged()));
activateFilters(true);
}
void PartSet_WidgetSketchLabel::deactivate()
{
ModuleBase_ModelWidget::deactivate();
- bool aHidePreview = myPreviewDisplayed;
- erasePreviewPlanes();
+ bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
+ myPreviewPlanes->erasePreviewPlanes(myWorkshop);
activateSelection(false);
activateFilters(false);
}
}
-void PartSet_WidgetSketchLabel::erasePreviewPlanes()
-{
- if (myPreviewDisplayed) {
- XGUI_Displayer* aDisp = workshop()->displayer();
- aDisp->eraseAIS(myYZPlane, false);
- aDisp->eraseAIS(myXZPlane, false);
- aDisp->eraseAIS(myXYPlane, false);
- myPreviewDisplayed = false;
- }
-}
-
-void PartSet_WidgetSketchLabel::showPreviewPlanes()
-{
- if (myPreviewDisplayed)
- return;
-
- if (!myYZPlane) { // If planes are not created
- // Create Preview
- std::shared_ptr<GeomAPI_Pnt> anOrigin(new GeomAPI_Pnt(0, 0, 0));
- std::shared_ptr<GeomAPI_Dir> aYZDir(new GeomAPI_Dir(1, 0, 0));
- // -1, not 1 for correct internal sketch coords (issue 898)
- std::shared_ptr<GeomAPI_Dir> aXZDir(new GeomAPI_Dir(0, -1, 0));
- std::shared_ptr<GeomAPI_Dir> aXYDir(new GeomAPI_Dir(0, 0, 1));
-
- std::vector<int> aYZRGB, aXZRGB, aXYRGB;
- aYZRGB = Config_PropManager::color("Visualization", "yz_plane_color",
- YZ_PLANE_COLOR);
- aXZRGB = Config_PropManager::color("Visualization", "xz_plane_color",
- XZ_PLANE_COLOR);
- aXYRGB = Config_PropManager::color("Visualization", "xy_plane_color",
- XY_PLANE_COLOR);
- int aR[] = {aYZRGB[0], aYZRGB[1], aYZRGB[2]};
- int aG[] = {aXZRGB[0], aXZRGB[1], aXZRGB[2]};
- int aB[] = {aXYRGB[0], aXYRGB[1], aXYRGB[2]};
-
- myYZPlane = createPreviewPlane(anOrigin, aYZDir, aR);
- myXZPlane = createPreviewPlane(anOrigin, aXZDir, aG);
- myXYPlane = createPreviewPlane(anOrigin, aXYDir, aB);
- }
- XGUI_Displayer* aDisp = workshop()->displayer();
- aDisp->displayAIS(myYZPlane, true, false);
- aDisp->displayAIS(myXZPlane, true, false);
- aDisp->displayAIS(myXYPlane, true, false);
- myPreviewDisplayed = true;
-}
-
-
-AISObjectPtr PartSet_WidgetSketchLabel::createPreviewPlane(std::shared_ptr<GeomAPI_Pnt> theOrigin,
- std::shared_ptr<GeomAPI_Dir> theNorm,
- const int theRGB[3])
-{
- double aSize = Config_PropManager::integer("Sketch planes", "planes_size", PLANE_SIZE);
- std::shared_ptr<GeomAPI_Shape> aFace = GeomAlgoAPI_FaceBuilder::square(theOrigin, theNorm, aSize);
- AISObjectPtr aAIS = AISObjectPtr(new GeomAPI_AISObject());
- aAIS->createShape(aFace);
- aAIS->setWidth(Config_PropManager::integer("Sketch planes", "planes_thickness", SKETCH_WIDTH));
- aAIS->setColor(theRGB[0], theRGB[1], theRGB[2]);
- return aAIS;
-}
-
std::shared_ptr<GeomAPI_Dir> PartSet_WidgetSketchLabel::setSketchPlane(const FeaturePtr& theFeature,
const TopoDS_Shape& theShape)
// get plane parameters
- std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
+ std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
+ std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aFace);
if (!aPlane.get())
return std::shared_ptr<GeomAPI_Dir>();
return aDir;
}
-XGUI_Workshop* PartSet_WidgetSketchLabel::workshop() const
-{
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
- return aConnector->workshop();
-}
-
-
void PartSet_WidgetSketchLabel::onSetPlaneView()
{
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
