#include <GeomDataAPI_Dir.h>
#include <GeomAPI_XYZ.h>
#include <GeomAPI_Face.h>
+#include <GeomAPI_Edge.h>
+#include <GeomAPI_ShapeExplorer.h>
#include <SketchPlugin_Sketch.h>
#include <SketcherPrs_Tools.h>
void PartSet_WidgetSketchLabel::blockAttribute(const AttributePtr& theAttribute,
const bool& theToBlock, bool& isFlushesActived,
- bool& isAttributeSetInitializedBlocked)
+ bool& isAttributeSetInitializedBlocked,
+ bool& isAttributeSendUpdatedBlocked)
{
ModuleBase_WidgetValidated::blockAttribute(theAttribute, theToBlock, isFlushesActived,
- isAttributeSetInitializedBlocked);
+ isAttributeSetInitializedBlocked,
+ isAttributeSendUpdatedBlocked);
// We do not restore the previous state of isAttributeSetInitializedBlocked for each of
// attributes. It it is necessary, these states should be append to the method attributes
// or stored in the widget
// 2. if the planes were displayed, change the view projection
const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Shape> aGShape;
- std::shared_ptr<GeomAPI_Shape> aBaseShape;
DataPtr aData = feature()->data();
AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
// selection happens in OCC viewer
if (aShape.get() && !aShape->isNull()) {
aGShape = aShape;
-
- if (aSelAttr && aSelAttr->context()) {
- aBaseShape = aSelAttr->context()->shape();
- }
}
else { // selection happens in OCC viewer(on body) of in the OB browser
if (aSelAttr) {
aGShape = aSelAttr->value();
}
}
+ // If the selected object is a sketch then use its plane
+ std::shared_ptr<GeomAPI_Pln> aPlane;
+ ObjectPtr aObj = thePrs->object();
+ if (aObj.get()) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
+ if (aFeature.get() && (aFeature != feature())) {
+ if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
+ CompositeFeaturePtr aSketch =
+ std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
+ aPlane = PartSet_Tools::sketchPlane(aSketch);
+ }
+ }
+ }
if (aGShape.get() != NULL) {
// get plane parameters
- std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
- std::shared_ptr<GeomAPI_Pln> aPlane = aFace->getPlane();
+ if (!aPlane.get()) {
+ std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
+ aPlane = aFace->getPlane();
+ }
+ if (!aPlane.get())
+ return;
std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
double aTwist = 0.0;
// Rotate view if the sketcher plane is selected only from preview planes
// Preview planes are created only if there is no any shape
- bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane", "false");
+ bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane");
if (aRotate) {
myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
- PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
- if (aModule)
- aModule->onViewTransformed();
}
QString aSizeOfViewStr = mySizeOfView->text();
if (!aSizeOfViewStr.isEmpty()) {
}
}
}
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
+ if (aModule)
+ aModule->onViewTransformed();
}
// 3. Clear text in the label
myStackWidget->setCurrentIndex(1);
// 6. Update sketcher actions
XGUI_ActionsMgr* anActMgr = aWorkshop->actionsMgr();
+
myWorkshop->updateCommandStatus();
+ aWorkshop->selector()->clearSelection();
myWorkshop->viewer()->update();
}
bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrsPtr& thePrs)
{
- return fillSketchPlaneBySelection(feature(), thePrs);
+ return fillSketchPlaneBySelection(thePrs);
}
bool PartSet_WidgetSketchLabel::canFillSketch(const ModuleBase_ViewerPrsPtr& thePrs)
return aCanFillSketch;
}
-bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const FeaturePtr& theFeature,
- const ModuleBase_ViewerPrsPtr& thePrs)
+bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const ModuleBase_ViewerPrsPtr& thePrs)
{
bool isOwnerSet = false;
const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Dir> aDir;
- if (thePrs->object() && (theFeature != thePrs->object())) {
- DataPtr aData = theFeature->data();
+ if (thePrs->object() && (feature() != thePrs->object())) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(thePrs->object());
+ if (aFeature.get() && (aFeature != feature())) {
+ if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
+ CompositeFeaturePtr aSketch =
+ std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
+ std::shared_ptr<GeomAPI_Pln> aPlane = PartSet_Tools::sketchPlane(aSketch);
+ if (aPlane.get()) {
+ aDir = setSketchPlane(aPlane);
+ return aDir.get();
+ }
+ }
+ }
+ DataPtr aData = feature()->data();
AttributeSelectionPtr aSelAttr =
std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
(aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
}
else if (aShape.get() && !aShape->isNull()) {
const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
- aDir = setSketchPlane(theFeature, aTDShape);
+ aDir = setSketchPlane(aTDShape);
isOwnerSet = aDir.get();
}
return isOwnerSet;
activateSelection(true);
- //myLabel->setText(myText);
- //myLabel->setToolTip(myTooltip);
-
connect(XGUI_Tools::workshop(myWorkshop)->selector(), SIGNAL(selectionChanged()),
this, SLOT(onSelectionChanged()));
activateFilters(true);
QIntList aModes;
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
if (aPlane.get()) {
+ //QList<std::shared_ptr<ModuleBase_ViewerPrs>> aEdges = findCircularEdgesInPlane();
+ //foreach(std::shared_ptr<ModuleBase_ViewerPrs> aPrs, aEdges) {
+ //}
myWorkshop->module()->activeSelectionModes(aModes);
}
else {
}
-std::shared_ptr<GeomAPI_Dir> PartSet_WidgetSketchLabel::setSketchPlane(const FeaturePtr& theFeature,
- const TopoDS_Shape& theShape)
+std::shared_ptr<GeomAPI_Dir>
+ PartSet_WidgetSketchLabel::setSketchPlane(const TopoDS_Shape& theShape)
{
if (theShape.IsNull())
return std::shared_ptr<GeomAPI_Dir>();
std::shared_ptr<GeomAPI_Shape> aGShape(new GeomAPI_Shape);
aGShape->setImpl(new TopoDS_Shape(theShape));
-
-
// get plane parameters
std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
std::shared_ptr<GeomAPI_Pln> aPlane = aFace->getPlane();
if (!aPlane.get())
return std::shared_ptr<GeomAPI_Dir>();
+ return setSketchPlane(aPlane);
+}
+std::shared_ptr<GeomAPI_Dir>
+ PartSet_WidgetSketchLabel::setSketchPlane(std::shared_ptr<GeomAPI_Pln> thePlane)
+{
// set plane parameters to feature
- std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
+ std::shared_ptr<ModelAPI_Data> aData = feature()->data();
double anA, aB, aC, aD;
- aPlane->coefficients(anA, aB, aC, aD);
+ thePlane->coefficients(anA, aB, aC, aD);
// calculate attributes of the sketch
std::shared_ptr<GeomAPI_Dir> aNormDir(new GeomAPI_Dir(anA, aB, aC));
std::shared_ptr<GeomDataAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
aDirX->setValue(aXDir);
- std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
+ std::shared_ptr<GeomAPI_Dir> aDir = thePlane->direction();
return aDir;
}
aModule->onViewTransformed();
}
}
+
+
+//******************************************************
+QList<std::shared_ptr<ModuleBase_ViewerPrs>> PartSet_WidgetSketchLabel::findCircularEdgesInPlane()
+{
+ QList<std::shared_ptr<ModuleBase_ViewerPrs>> aResult;
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ QObjectPtrList aDispObjects = aDisplayer->displayedObjects();
+
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ foreach(ObjectPtr aObj, aDispObjects) {
+ ResultPtr aResObj = std::dynamic_pointer_cast<ModelAPI_Result>(aObj);
+ if (aResObj.get()) {
+ GeomShapePtr aShape = aResObj->shape();
+ if (aShape.get()) {
+ GeomAPI_ShapeExplorer aExplorer(aShape, GeomAPI_Shape::EDGE);
+ for(; aExplorer.more(); aExplorer.next()) {
+ GeomShapePtr aEdgeShape = aExplorer.current();
+ GeomAPI_Edge anEdge(aEdgeShape);
+ if ((anEdge.isCircle() || anEdge.isArc() || anEdge.isEllipse()) &&
+ anEdge.isInPlane(aPlane)) {
+ bool isContains = false;
+ // Check that edge is not used.
+ // It is possible that the same edge will be taken from different faces
+ foreach(std::shared_ptr<ModuleBase_ViewerPrs> aPrs, aResult) {
+ GeomAPI_Edge aUsedEdge(aPrs->shape());
+ if (aUsedEdge.isEqual(aEdgeShape)) {
+ isContains = true;
+ break;
+ }
+ }
+ if (!isContains) {
+ std::shared_ptr<ModuleBase_ViewerPrs>
+ aPrs(new ModuleBase_ViewerPrs(aResObj, aEdgeShape));
+ aResult.append(aPrs);
+ }
+ }
+ }
+ }
+ }
+ }
+ return aResult;
+}