#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Tools.h"
+#include "PartSet_Module.h"
#include "SketchPlugin_SketchEntity.h"
#include <ModelAPI_Tools.h>
#include <GeomAlgoAPI_FaceBuilder.h>
+#include <GeomAlgoAPI_ShapeTools.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
#include <GeomAPI_XYZ.h>
#include <QApplication>
#include <QVBoxLayout>
#include <QCheckBox>
+#include <QGroupBox>
+#include <QPushButton>
+#include <QStackedWidget>
PartSet_WidgetSketchLabel::PartSet_WidgetSketchLabel(QWidget* theParent,
+ ModuleBase_IWorkshop* theWorkshop,
const Config_WidgetAPI* theData,
const std::string& theParentId,
bool toShowConstraints)
- : ModuleBase_WidgetValidated(theParent, theData, theParentId),
- myPreviewDisplayed(false),
- myWorkshop(NULL)
+: ModuleBase_WidgetValidated(theParent, theWorkshop, theData, theParentId),
+ myPreviewDisplayed(false)
{
- myText = QString::fromStdString(theData->getProperty("title"));
- myLabel = new QLabel("", theParent);
- myLabel->setWordWrap(true);
- myTooltip = QString::fromStdString(theData->getProperty("tooltip"));
- myLabel->setToolTip("");
- myLabel->setIndent(5);
-
QVBoxLayout* aLayout = new QVBoxLayout(this);
ModuleBase_Tools::zeroMargins(aLayout);
- aLayout->addWidget(myLabel);
- myShowConstraints = new QCheckBox(tr("Show constraints"), this);
- aLayout->addWidget(myShowConstraints);
+ myStackWidget = new QStackedWidget(this);
+ myStackWidget->setContentsMargins(0,0,0,0);
+ aLayout->addWidget(myStackWidget);
+
+ // Define label for plane selection
+ QWidget* aFirstWgt = new QWidget(this);
+
+ QString aText = QString::fromStdString(theData->getProperty("title"));
+ QLabel* aLabel = new QLabel(aText, aFirstWgt);
+ aLabel->setWordWrap(true);
+ QString aTooltip = QString::fromStdString(theData->getProperty("tooltip"));
+ aLabel->setToolTip(aTooltip);
+ aLabel->setIndent(5);
+
+ aLayout = new QVBoxLayout(aFirstWgt);
+ ModuleBase_Tools::zeroMargins(aLayout);
+ aLayout->addWidget(aLabel);
+
+ myStackWidget->addWidget(aFirstWgt);
+
+ // Define widget for sketch manmagement
+ QWidget* aSecondWgt = new QWidget(this);
+ aLayout = new QVBoxLayout(aSecondWgt);
+ ModuleBase_Tools::zeroMargins(aLayout);
+
+ QGroupBox* aViewBox = new QGroupBox(tr("Sketcher plane"), this);
+ QVBoxLayout* aViewLayout = new QVBoxLayout(aViewBox);
+
+ myViewInverted = new QCheckBox(tr("Reversed"), aViewBox);
+ aViewLayout->addWidget(myViewInverted);
- setLayout(aLayout);
+ QPushButton* aSetViewBtn = new QPushButton(QIcon(":icons/plane_view.png"), tr("Set plane view"), aViewBox);
+ connect(aSetViewBtn, SIGNAL(clicked(bool)), this, SLOT(onSetPlaneView()));
+ aViewLayout->addWidget(aSetViewBtn);
+
+ aLayout->addWidget(aViewBox);
+
+ myShowConstraints = new QCheckBox(tr("Show constraints"), this);
connect(myShowConstraints, SIGNAL(toggled(bool)), this, SIGNAL(showConstraintToggled(bool)));
myShowConstraints->setChecked(toShowConstraints);
+ aLayout->addWidget(myShowConstraints);
+
+ myStackWidget->addWidget(aSecondWgt);
+ //setLayout(aLayout);
}
PartSet_WidgetSketchLabel::~PartSet_WidgetSketchLabel()
{
- erasePreviewPlanes();
}
-bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrs>& theValues)
+bool PartSet_WidgetSketchLabel::setSelection(QList<ModuleBase_ViewerPrs>& theValues,
+ const bool theToValidate)
{
// do not use the given selection if the plane of the sketch has been already set.
// If this check is absent, a selected plane in the viewer can be set in the sketch
if (plane().get())
return true;
- return ModuleBase_WidgetValidated::setSelection(theValues);
+ ModuleBase_ViewerPrs aPrs = theValues.first();
+ bool aDone = ModuleBase_WidgetValidated::setSelection(theValues, theToValidate);
+ if (aDone)
+ updateByPlaneSelected(aPrs);
+
+ return aDone;
}
QList<QWidget*> PartSet_WidgetSketchLabel::getControls() const
{
QList<QWidget*> aResult;
- aResult << myLabel;
+ aResult << myStackWidget;
return aResult;
}
void PartSet_WidgetSketchLabel::onSelectionChanged()
{
- QList<ModuleBase_ViewerPrs> aSelectedPrs = myWorkshop->selector()->selection()->getSelected(
- ModuleBase_ISelection::AllControls);
- if (aSelectedPrs.empty())
- return;
- ModuleBase_ViewerPrs aPrs = aSelectedPrs.first();
- if (aPrs.isEmpty() || !isValidSelection(aPrs))
+ QList<ModuleBase_ViewerPrs> aSelected = getFilteredSelected();
+
+ if (aSelected.empty())
return;
+ ModuleBase_ViewerPrs aPrs = aSelected.first();
+
+ bool aDone = ModuleBase_WidgetValidated::setSelection(aSelected, false);
+ if (aDone) {
+ updateByPlaneSelected(aPrs);
+ updateObject(myFeature);
+ }
+}
- // 2. set the selection to sketch
- setSelectionCustom(aPrs);
- // 3. hide main planes if they have been displayed
+void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrs& thePrs)
+{
+ // 1. hide main planes if they have been displayed
erasePreviewPlanes();
- // 4. if the planes were displayed, change the view projection
- TopoDS_Shape aShape = aPrs.shape();
+ // 2. if the planes were displayed, change the view projection
+ TopoDS_Shape aShape = thePrs.shape();
std::shared_ptr<GeomAPI_Shape> aGShape;
+ std::shared_ptr<GeomAPI_Shape> aBaseShape;
+
+ DataPtr aData = feature()->data();
+ AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+
// selection happens in OCC viewer
if (!aShape.IsNull()) {
- aGShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape);
+ aGShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape());
aGShape->setImpl(new TopoDS_Shape(aShape));
+
+ if (aSelAttr && aSelAttr->context()) {
+ aBaseShape = aSelAttr->context()->shape();
+ }
}
else { // selection happens in OCC viewer(on body) of in the OB browser
- DataPtr aData = feature()->data();
- AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
- (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
if (aSelAttr) {
aGShape = aSelAttr->value();
}
// get plane parameters
std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
-
- myWorkshop->viewer()->setViewProjection(aDir->x(), aDir->y(), aDir->z());
+ gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
+ double aTwist = 0.0;
+
+ // orienting projection is not needed: it is done in GeomAlgoAPI_FaceBuilder::plane
+ /*if (aGShape->impl<TopoDS_Shape>().Orientation() == TopAbs_REVERSED) {
+ aXYZ.Reverse();
+ }*/
+
+ // Rotate view if the sketcher plane is selected only from preview planes
+ // Preview planes are created only if there is no any shape
+ bool aRotate = Config_PropManager::boolean("Sketch planes", "rotate_to_plane", "false");
+ if (aRotate) {
+ myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
+ if (aModule)
+ aModule->onViewTransformed();
+ }
}
- // 5. Clear text in the label
- myLabel->setText("");
- myLabel->setToolTip("");
- disconnect(myWorkshop->selector(), SIGNAL(selectionChanged()),
+ // 3. Clear text in the label
+ myStackWidget->setCurrentIndex(1);
+ //myLabel->setText("");
+ //myLabel->setToolTip("");
+ disconnect(workshop()->selector(), SIGNAL(selectionChanged()),
this, SLOT(onSelectionChanged()));
- // 6. deactivate face selection filter
- activateFilters(myWorkshop->module()->workshop(), false);
+ // 4. deactivate face selection filter
+ activateFilters(false);
- // 7. Clear selection mode and define sketching mode
- //XGUI_Displayer* aDisp = myWorkshop->displayer();
+ // 5. Clear selection mode and define sketching mode
+ //XGUI_Displayer* aDisp = workshop()->displayer();
//aDisp->closeLocalContexts();
emit planeSelected(plane());
// after the plane is selected in the sketch, the sketch selection should be activated
// the selection by any label deactivation, but need to switch it off by stop the sketch
activateSelection(true);
- // 8. Update sketcher actions
- XGUI_ActionsMgr* anActMgr = myWorkshop->actionsMgr();
- anActMgr->update();
+ // 6. Update sketcher actions
+ XGUI_ActionsMgr* anActMgr = workshop()->actionsMgr();
+ myWorkshop->updateCommandStatus();
myWorkshop->viewer()->update();
}
{
CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
return PartSet_Tools::sketchPlane(aSketch);
-
}
bool PartSet_WidgetSketchLabel::focusTo()
{
- myLabel->setFocus();
+ myStackWidget->setFocus();
return true;
}
void PartSet_WidgetSketchLabel::enableFocusProcessing()
{
- myLabel->installEventFilter(this);
+ myStackWidget->installEventFilter(this);
}
void PartSet_WidgetSketchLabel::storeAttributeValue()
{
+ ModuleBase_WidgetValidated::storeAttributeValue();
}
void PartSet_WidgetSketchLabel::restoreAttributeValue(const bool theValid)
{
+ ModuleBase_WidgetValidated::restoreAttributeValue(theValid);
+
// it is not necessary to save the previous plane value because the plane is chosen once
DataPtr aData = feature()->data();
AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
{
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
if (aPlane.get()) {
+ myStackWidget->setCurrentIndex(1);
activateSelection(true);
return;
}
+ myStackWidget->setCurrentIndex(0);
bool aBodyIsVisualized = false;
- XGUI_Displayer* aDisp = myWorkshop->displayer();
+ XGUI_Displayer* aDisp = workshop()->displayer();
QObjectPtrList aDisplayed = aDisp->displayedObjects();
foreach (ObjectPtr anObj, aDisplayed) {
ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObj);
}
activateSelection(true);
- myLabel->setText(myText);
- myLabel->setToolTip(myTooltip);
+ //myLabel->setText(myText);
+ //myLabel->setToolTip(myTooltip);
- connect(myWorkshop->selector(), SIGNAL(selectionChanged()), this, SLOT(onSelectionChanged()));
- activateFilters(myWorkshop->module()->workshop(), true);
-
- aDisp->updateViewer();
+ connect(workshop()->selector(), SIGNAL(selectionChanged()), this, SLOT(onSelectionChanged()));
+ activateFilters(true);
}
void PartSet_WidgetSketchLabel::deactivate()
{
+ ModuleBase_ModelWidget::deactivate();
erasePreviewPlanes();
activateSelection(false);
- activateFilters(myWorkshop->module()->workshop(), false);
+ activateFilters(false);
}
void PartSet_WidgetSketchLabel::activateSelection(bool toActivate)
QIntList aModes;
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
if (aPlane.get()) {
- myWorkshop->moduleConnector()->module()->activeSelectionModes(aModes);
+ myWorkshop->module()->activeSelectionModes(aModes);
}
else {
aModes << TopAbs_FACE;
}
- myWorkshop->moduleConnector()->activateSubShapesSelection(aModes);
+ myWorkshop->activateSubShapesSelection(aModes);
} else {
- myWorkshop->moduleConnector()->deactivateSubShapesSelection();
+ myWorkshop->deactivateSubShapesSelection();
}
}
void PartSet_WidgetSketchLabel::erasePreviewPlanes()
{
if (myPreviewDisplayed) {
- XGUI_Displayer* aDisp = myWorkshop->displayer();
+ XGUI_Displayer* aDisp = workshop()->displayer();
aDisp->eraseAIS(myYZPlane, false);
aDisp->eraseAIS(myXZPlane, false);
aDisp->eraseAIS(myXYPlane, false);
// Create Preview
std::shared_ptr<GeomAPI_Pnt> anOrigin(new GeomAPI_Pnt(0, 0, 0));
std::shared_ptr<GeomAPI_Dir> aYZDir(new GeomAPI_Dir(1, 0, 0));
- std::shared_ptr<GeomAPI_Dir> aXZDir(new GeomAPI_Dir(0, 1, 0));
+ // -1, not 1 for correct internal sketch coords (issue 898)
+ std::shared_ptr<GeomAPI_Dir> aXZDir(new GeomAPI_Dir(0, -1, 0));
std::shared_ptr<GeomAPI_Dir> aXYDir(new GeomAPI_Dir(0, 0, 1));
std::vector<int> aYZRGB, aXZRGB, aXYRGB;
myXZPlane = createPreviewPlane(anOrigin, aXZDir, aG);
myXYPlane = createPreviewPlane(anOrigin, aXYDir, aB);
}
- XGUI_Displayer* aDisp = myWorkshop->displayer();
- aDisp->displayAIS(myYZPlane, false);
- aDisp->displayAIS(myXZPlane, false);
- aDisp->displayAIS(myXYPlane, false);
+ XGUI_Displayer* aDisp = workshop()->displayer();
+ aDisp->displayAIS(myYZPlane, true, false);
+ aDisp->displayAIS(myXZPlane, true, false);
+ aDisp->displayAIS(myXYPlane, true, false);
myPreviewDisplayed = true;
}
// get plane parameters
std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aGShape);
+ if (!aPlane.get())
+ return std::shared_ptr<GeomAPI_Dir>();
// set plane parameters to feature
std::shared_ptr<ModelAPI_Data> aData = feature()->data();
myShowConstraints->setChecked(theOn);
emit showConstraintToggled(theOn);
}
+
+XGUI_Workshop* PartSet_WidgetSketchLabel::workshop() const
+{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ return aConnector->workshop();
+}
+
+
+void PartSet_WidgetSketchLabel::onSetPlaneView()
+{
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (aPlane.get()) {
+ std::shared_ptr<GeomAPI_Dir> aDirection = aPlane->direction();
+ gp_Dir aDir = aDirection->impl<gp_Dir>();
+ if (myViewInverted->isChecked())
+ aDir.Reverse();
+ myWorkshop->viewer()->setViewProjection(aDir.X(), aDir.Y(), aDir.Z(), 0.);
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
+ if (aModule)
+ aModule->onViewTransformed();
+ }
+}