-// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
-
-// File: PartSet_WidgetSketchLabel.cpp
-// Created: 07 July 2014
-// Author: Vitaly SMETANNIKOV
+// Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Tools.h"
#include "PartSet_Module.h"
#include "PartSet_PreviewPlanes.h"
+#include "PartSet_SketcherReentrantMgr.h"
#include "SketchPlugin_SketchEntity.h"
-#include <XGUI_Workshop.h>
+#include <XGUI_ActionsMgr.h>
#include <XGUI_Displayer.h>
-#include <XGUI_SelectionMgr.h>
+#include <XGUI_ModuleConnector.h>
+#include <XGUI_SelectionActivate.h>
#include <XGUI_Selection.h>
-#include <XGUI_ViewerProxy.h>
-#include <XGUI_ActionsMgr.h>
+#include <XGUI_SelectionMgr.h>
#include <XGUI_Tools.h>
-#include <XGUI_ModuleConnector.h>
+#include <XGUI_ViewerProxy.h>
+#include <XGUI_Workshop.h>
+
+#include <ModelAPI_ResultBody.h>
+#include <ModelAPI_Tools.h>
+#include <ModelAPI_AttributeString.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_ViewerPrs.h>
#include <ModuleBase_Tools.h>
#include <ModuleBase_IModule.h>
-
-#include <ModelAPI_ResultBody.h>
-#include <ModelAPI_Tools.h>
+#include <ModuleBase_IPropertyPanel.h>
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomAlgoAPI_ShapeTools.h>
#include <GeomDataAPI_Dir.h>
#include <GeomAPI_XYZ.h>
#include <GeomAPI_Face.h>
+#include <GeomAPI_Edge.h>
+#include <GeomAPI_ShapeExplorer.h>
#include <SketchPlugin_Sketch.h>
#include <SketcherPrs_Tools.h>
#include <QCheckBox>
#include <QGroupBox>
#include <QPushButton>
-#include <QStackedWidget>
#include <QLineEdit>
#include <QDoubleValidator>
+#include <QDialog>
#ifndef DBL_MAX
#define DBL_MAX 1.7976931348623158e+308
ModuleBase_IWorkshop* theWorkshop,
const Config_WidgetAPI* theData,
const QMap<PartSet_Tools::ConstraintVisibleState, bool>& toShowConstraints)
-: ModuleBase_WidgetValidated(theParent, theWorkshop, theData)
+: ModuleBase_WidgetValidated(theParent, theWorkshop, theData), myOpenTransaction(false),
+myIsSelection(false)
{
QVBoxLayout* aLayout = new QVBoxLayout(this);
ModuleBase_Tools::zeroMargins(aLayout);
// Size of the View control
mySizeOfViewWidget = new QWidget(aFirstWgt);
QHBoxLayout* aSizeLayout = new QHBoxLayout(mySizeOfViewWidget);
- aSizeLayout->addWidget(new QLabel("Size of the view", mySizeOfViewWidget));
+ aSizeLayout->addWidget(new QLabel(tr("Size of the view"), mySizeOfViewWidget));
mySizeOfView = new QLineEdit(mySizeOfViewWidget);
QDoubleValidator* aValidator = new QDoubleValidator(0, DBL_MAX, 12, mySizeOfView);
mySizeOfView->setValidator(aValidator);
aSizeLayout->addWidget(mySizeOfView);
- QString aText = QString::fromStdString(theData->getProperty("title"));
+ myPartSetMessage = new QDialog(this, Qt::ToolTip);
+ myPartSetMessage->setModal(false);
+ myPartSetMessage->setStyleSheet("background-color:lightyellow;");
+ QVBoxLayout* aMsgLay = new QVBoxLayout(myPartSetMessage);
+ QString aMsg = tr("The Sketch is created in PartSet.\n"
+ "It will be necessary to create a Part in order to use this sketch for body creation");
+ aMsgLay->addWidget(new QLabel(aMsg, myPartSetMessage));
+ myPartSetMessage->hide();
+
+ mySizeMessage = new QDialog(mySizeOfView, Qt::ToolTip);
+ mySizeMessage->setModal(false);
+ mySizeMessage->setStyleSheet("background-color:lightyellow;");
+ aMsgLay = new QVBoxLayout(mySizeMessage);
+ aMsg = tr("A size of Sketch view can be defined here.");
+ aMsgLay->addWidget(new QLabel(aMsg, mySizeMessage));
+ mySizeMessage->hide();
+
+ QString aText = translate(theData->getProperty("title"));
QLabel* aLabel = new QLabel(aText, aFirstWgt);
aLabel->setWordWrap(true);
- QString aTooltip = QString::fromStdString(theData->getProperty("tooltip"));
+ QString aTooltip = translate(theData->getProperty("tooltip"));
aLabel->setToolTip(aTooltip);
aLabel->setIndent(5);
ModuleBase_Tools::zeroMargins(aLayout);
aLayout->addWidget(mySizeOfViewWidget);
aLayout->addWidget(aLabel);
+
+ myRemoveExternal = new QCheckBox(tr("Remove external dependencies"), aFirstWgt);
+ myRemoveExternal->setChecked(false);
+ aLayout->addWidget(myRemoveExternal);
+ myRemoveExternal->setVisible(false);
+
aLayout->addStretch(1);
myStackWidget->addWidget(aFirstWgt);
if (toShowConstraints.contains(aState))
aShowConstraints->setChecked(toShowConstraints[aState]);
}
+ myShowPoints = new QCheckBox(tr("Show free points"), this);
+ connect(myShowPoints, SIGNAL(toggled(bool)), this, SIGNAL(showFreePoints(bool)));
+ aLayout->addWidget(myShowPoints);
+
+ myAutoConstraints = new QCheckBox(tr("Automatic constraints"), this);
+ myAutoConstraints->setToolTip(tr("Automatic vertical and horizontal constraints"));
+ connect(myAutoConstraints, SIGNAL(toggled(bool)), this, SIGNAL(autoConstraints(bool)));
+ aLayout->addWidget(myAutoConstraints);
+
+ QPushButton* aPlaneBtn = new QPushButton(tr("Change sketch plane"), aSecondWgt);
+ connect(aPlaneBtn, SIGNAL(clicked(bool)), SLOT(onChangePlane()));
+ aLayout->addWidget(aPlaneBtn);
+
+ myDoFLabel = new QLabel("", aSecondWgt);
+ aLayout->addWidget(myDoFLabel);
myStackWidget->addWidget(aSecondWgt);
//setLayout(aLayout);
return aResult;
}
-void PartSet_WidgetSketchLabel::onSelectionChanged()
+bool PartSet_WidgetSketchLabel::processSelection()
{
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (aPlane.get())
+ return false;
+
QList<ModuleBase_ViewerPrsPtr> aSelected = getFilteredSelected();
if (aSelected.empty())
- return;
+ return false;
ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
bool aDone = setSelectionInternal(aSelected, false);
if (aDone) {
updateByPlaneSelected(aPrs);
updateObject(myFeature);
}
+
+ return aDone;
}
void PartSet_WidgetSketchLabel::onShowConstraint(bool theOn)
else {
// it removes the processed value from the parameters list
ModuleBase_ViewerPrsPtr aValue = theValues.first();//.takeFirst();
- if (!theToValidate || isValidInFilters(aValue))
+ if (!theToValidate || isValidInFilters(aValue)) {
+ myIsSelection = true;
aDone = setSelectionCustom(aValue);
+ myIsSelection = false;
+ }
}
return aDone;
void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrsPtr& thePrs)
{
- // 1. hide main planes if they have been displayed
+ GeomPlanePtr aPlane = plane();
+ if (!aPlane.get())
+ return;
+
+ myPartSetMessage->hide();
+ mySizeMessage->hide();
+
+ // 1. hide main planes if they have been displayed and display sketch preview plane
myPreviewPlanes->erasePreviewPlanes(myWorkshop);
+
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
+ if (aModule) {
+ CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
+ bool isSetSizeOfView = false;
+ double aSizeOfView = 0;
+ QString aSizeOfViewStr = mySizeOfView->text();
+ if (!aSizeOfViewStr.isEmpty()) {
+ aSizeOfView = aSizeOfViewStr.toDouble(&isSetSizeOfView);
+ if (isSetSizeOfView && aSizeOfView <= 0) {
+ isSetSizeOfView = false;
+ }
+ }
+ aModule->sketchMgr()->previewSketchPlane()->setSizeOfView(aSizeOfView, isSetSizeOfView);
+ aModule->sketchMgr()->previewSketchPlane()->createSketchPlane(aSketch, myWorkshop);
+ }
// 2. if the planes were displayed, change the view projection
- const GeomShapePtr& aShape = thePrs->shape();
- std::shared_ptr<GeomAPI_Shape> aGShape;
- DataPtr aData = feature()->data();
- AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
- (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+ std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
+ gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
+ double aTwist = 0.0;
- // selection happens in OCC viewer
- if (aShape.get() && !aShape->isNull()) {
- aGShape = aShape;
+ // Rotate view if the sketcher plane is selected only from preview planes
+ // Preview planes are created only if there is no any shape
+ bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane");
+ if (aRotate) {
+ myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
}
- else { // selection happens in OCC viewer(on body) of in the OB browser
- if (aSelAttr) {
- aGShape = aSelAttr->value();
- }
- }
- // If the selected object is a sketch then use its plane
- std::shared_ptr<GeomAPI_Pln> aPlane;
- ObjectPtr aObj = thePrs->object();
- if (aObj.get()) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
- if (aFeature.get() && (aFeature != feature())) {
- if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
- CompositeFeaturePtr aSketch =
- std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
- aPlane = PartSet_Tools::sketchPlane(aSketch);
+ QString aSizeOfViewStr = mySizeOfView->text();
+ if (!aSizeOfViewStr.isEmpty()) {
+ bool isOk;
+ double aSizeOfView = aSizeOfViewStr.toDouble(&isOk);
+ if (isOk && aSizeOfView > 0) {
+ Handle(V3d_View) aView3d = myWorkshop->viewer()->activeView();
+ if (!aView3d.IsNull()) {
+ Bnd_Box aBndBox;
+ double aHalfSize = aSizeOfView/2.0;
+ aBndBox.Update(-aHalfSize, -aHalfSize, -aHalfSize, aHalfSize, aHalfSize, aHalfSize);
+ aView3d->FitAll(aBndBox, 0.01, false);
}
}
}
- if (aGShape.get() != NULL) {
- // get plane parameters
- if (!aPlane.get()) {
- std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
- aPlane = aFace->getPlane();
- }
- if (!aPlane.get())
- return;
- std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
- gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
- double aTwist = 0.0;
-
- // orienting projection is not needed: it is done in GeomAlgoAPI_FaceBuilder::plane
- /*if (aGShape->impl<TopoDS_Shape>().Orientation() == TopAbs_REVERSED) {
- aXYZ.Reverse();
- }*/
-
- // Rotate view if the sketcher plane is selected only from preview planes
- // Preview planes are created only if there is no any shape
- bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane");
- if (aRotate) {
- myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
- }
- QString aSizeOfViewStr = mySizeOfView->text();
- if (!aSizeOfViewStr.isEmpty()) {
- bool isOk;
- double aSizeOfView = aSizeOfViewStr.toDouble(&isOk);
- if (isOk && aSizeOfView > 0) {
- Handle(V3d_View) aView3d = myWorkshop->viewer()->activeView();
- if (!aView3d.IsNull()) {
- Bnd_Box aBndBox;
- double aHalfSize = aSizeOfView/2.0;
- aBndBox.Update(-aHalfSize, -aHalfSize, -aHalfSize, aHalfSize, aHalfSize, aHalfSize);
- aView3d->FitAll(aBndBox, 0.01, false);
- }
- }
- }
- PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
- if (aModule)
- aModule->onViewTransformed();
+ if (myOpenTransaction) {
+ SessionPtr aMgr = ModelAPI_Session::get();
+ aMgr->finishOperation();
+ myOpenTransaction = false;
}
// 3. Clear text in the label
myStackWidget->setCurrentIndex(1);
//myLabel->setText("");
//myLabel->setToolTip("");
XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
- disconnect(aWorkshop->selector(), SIGNAL(selectionChanged()),
- this, SLOT(onSelectionChanged()));
- // 4. deactivate face selection filter
- activateFilters(false);
// 5. Clear selection mode and define sketching mode
emit planeSelected(plane());
// after the plane is selected in the sketch, the sketch selection should be activated
// it can not be performed in the sketch label widget because, we don't need to switch off
// the selection by any label deactivation, but need to switch it off by stop the sketch
- activateSelection(true);
+ myWorkshop->selectionActivate()->updateSelectionFilters();
+ myWorkshop->selectionActivate()->updateSelectionModes();
+
+ if (aModule)
+ aModule->onViewTransformed();
// 6. Update sketcher actions
XGUI_ActionsMgr* anActMgr = aWorkshop->actionsMgr();
myWorkshop->updateCommandStatus();
aWorkshop->selector()->clearSelection();
myWorkshop->viewer()->update();
+
+ myRemoveExternal->setVisible(false);
}
std::shared_ptr<GeomAPI_Pln> PartSet_WidgetSketchLabel::plane() const
bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrsPtr& thePrs)
{
+ if (myIsSelection && myRemoveExternal->isVisible()) {
+ if (myRemoveExternal->isChecked()) {
+ myFeature->customAction(SketchPlugin_Sketch::ACTION_REMOVE_EXTERNAL());
+ }
+ }
return fillSketchPlaneBySelection(thePrs);
}
const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Dir> aDir;
+ if (aShape.get() && !aShape->isNull()) {
+ const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
+ aDir = setSketchPlane(aTDShape);
+ isOwnerSet = aDir.get();
+ }
if (thePrs->object() && (feature() != thePrs->object())) {
FeaturePtr aFeature = ModelAPI_Feature::feature(thePrs->object());
- if (aFeature.get() && (aFeature != feature())) {
- if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
- CompositeFeaturePtr aSketch =
- std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
- std::shared_ptr<GeomAPI_Pln> aPlane = PartSet_Tools::sketchPlane(aSketch);
- if (aPlane.get()) {
- aDir = setSketchPlane(aPlane);
- return aDir.get();
- }
- }
- }
DataPtr aData = feature()->data();
AttributeSelectionPtr aSelAttr =
std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
(aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
- if (aSelAttr) {
+ if (aSelAttr.get()) {
ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs->object());
- if (aRes) {
- GeomShapePtr aShapePtr(new GeomAPI_Shape());
+ if (aRes.get()) {
+ GeomShapePtr aShapePtr;
if (!aShape.get() || aShape->isNull()) { // selection happens in the OCC viewer
aShapePtr = ModelAPI_Tools::shape(aRes);
}
else { // selection happens in OB browser
aShapePtr = aShape;
}
- if (aShapePtr.get() != NULL) {
+ if (aShapePtr.get() && aShapePtr->isFace()) {
+ const TopoDS_Shape& aTDShape = aShapePtr->impl<TopoDS_Shape>();
+ setSketchPlane(aTDShape);
aSelAttr->setValue(aRes, aShapePtr);
isOwnerSet = true;
}
}
+ else {
+ aSelAttr->setValue(aFeature, GeomShapePtr());
+ GeomShapePtr aShape = aSelAttr->value();
+ if (!aShape.get() && aSelAttr->contextFeature().get() &&
+ aSelAttr->contextFeature()->firstResult().get()) {
+ aShape = aSelAttr->contextFeature()->firstResult()->shape();
+ }
+ if (aShape.get() && aShape->isPlanar()) {
+ const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
+ setSketchPlane(aTDShape);
+ isOwnerSet = true;
+ }
+ }
}
}
- else if (aShape.get() && !aShape->isNull()) {
- const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
- aDir = setSketchPlane(aTDShape);
- isOwnerSet = aDir.get();
- }
return isOwnerSet;
}
void PartSet_WidgetSketchLabel::activateCustom()
{
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
+ if (aModule) {
+ bool isBlocked = myAutoConstraints->blockSignals(true);
+ myAutoConstraints->setChecked(aModule->sketchReentranceMgr()->isAutoConstraints());
+ myAutoConstraints->blockSignals(isBlocked);
+ }
+
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
if (aPlane.get()) {
myStackWidget->setCurrentIndex(1);
- activateSelection(true);
return;
}
// Clear previous selection mode It is necessary for correct activation of preview planes
XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
XGUI_Displayer* aDisp = aWorkshop->displayer();
- aDisp->activateObjects(QIntList(), aDisp->displayedObjects(), false);
+ aWorkshop->selectionActivate()->activateObjects(QIntList(), aDisp->displayedObjects(), false);
if (!aBodyIsVisualized) {
// We have to select a plane before any operation
}
else
mySizeOfViewWidget->setVisible(false);
+}
- activateSelection(true);
-
- connect(XGUI_Tools::workshop(myWorkshop)->selector(), SIGNAL(selectionChanged()),
- this, SLOT(onSelectionChanged()));
- activateFilters(true);
+void PartSet_WidgetSketchLabel::showEvent(QShowEvent* theEvent)
+{
+ if (mySizeOfViewWidget->isVisible()) {
+ DocumentPtr aDoc = feature()->document();
+ DocumentPtr aModDoc = ModelAPI_Session::get()->moduleDocument();
+ if (aModDoc == aDoc) {
+ myPartSetMessage->move(mapToGlobal(geometry().bottomLeft()));
+ myPartSetMessage->show();
+ }
+ mySizeMessage->move(mySizeOfView->mapToGlobal(mySizeOfView->geometry().center()));
+ mySizeMessage->show();
+ }
}
+
void PartSet_WidgetSketchLabel::deactivate()
{
- ModuleBase_ModelWidget::deactivate();
+ ModuleBase_WidgetValidated::deactivate();
bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
myPreviewPlanes->erasePreviewPlanes(myWorkshop);
- activateSelection(false);
- activateFilters(false);
if (aHidePreview)
myWorkshop->viewer()->update();
+
+ if (myOpenTransaction) {
+ SessionPtr aMgr = ModelAPI_Session::get();
+ aMgr->finishOperation();
+ myOpenTransaction = false;
+ }
}
-void PartSet_WidgetSketchLabel::activateSelection(bool toActivate)
+void PartSet_WidgetSketchLabel::selectionModes(int& theModuleSelectionModes, QIntList& theModes)
{
- if (toActivate) {
- QIntList aModes;
- std::shared_ptr<GeomAPI_Pln> aPlane = plane();
- if (aPlane.get()) {
- myWorkshop->module()->activeSelectionModes(aModes);
- }
- else {
- aModes << TopAbs_FACE;
- }
- myWorkshop->activateSubShapesSelection(aModes);
- } else {
- myWorkshop->deactivateSubShapesSelection();
- }
+ theModuleSelectionModes = -1;
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (!aPlane.get())
+ theModes << TopAbs_FACE;
}
+void PartSet_WidgetSketchLabel::selectionFilters(QIntList& theModuleSelectionFilters,
+ SelectMgr_ListOfFilter& theSelectionFilters)
+{
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (aPlane.get())
+ return;
+ return ModuleBase_WidgetValidated::selectionFilters(theModuleSelectionFilters,
+ theSelectionFilters);
+}
std::shared_ptr<GeomAPI_Dir>
PartSet_WidgetSketchLabel::setSketchPlane(const TopoDS_Shape& theShape)
std::shared_ptr<GeomAPI_Pnt> anOrigPnt(new GeomAPI_Pnt(aCoords));
// X axis is preferable to be dirX on the sketch
const double tol = Precision::Confusion();
- bool isX = fabs(anA - 1.0) < tol && fabs(aB) < tol && fabs(aC) < tol;
+ bool isX = fabs(fabs(anA) - 1.0) < tol && fabs(aB) < tol && fabs(aC) < tol;
std::shared_ptr<GeomAPI_Dir> aTempDir(
isX ? new GeomAPI_Dir(0, 1, 0) : new GeomAPI_Dir(1, 0, 0));
std::shared_ptr<GeomAPI_Dir> aYDir(new GeomAPI_Dir(aNormDir->cross(aTempDir)));
aModule->onViewTransformed();
}
}
+
+
+//******************************************************
+QList<std::shared_ptr<ModuleBase_ViewerPrs>> PartSet_WidgetSketchLabel::findCircularEdgesInPlane()
+{
+ QList<std::shared_ptr<ModuleBase_ViewerPrs>> aResult;
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ QObjectPtrList aDispObjects = aDisplayer->displayedObjects();
+
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ foreach(ObjectPtr aObj, aDispObjects) {
+ ResultPtr aResObj = std::dynamic_pointer_cast<ModelAPI_Result>(aObj);
+ if (aResObj.get()) {
+ GeomShapePtr aShape = aResObj->shape();
+ if (aShape.get()) {
+ GeomAPI_ShapeExplorer aExplorer(aShape, GeomAPI_Shape::EDGE);
+ for(; aExplorer.more(); aExplorer.next()) {
+ GeomShapePtr aEdgeShape = aExplorer.current();
+ GeomAPI_Edge anEdge(aEdgeShape);
+ if ((anEdge.isCircle() || anEdge.isArc() || anEdge.isEllipse()) &&
+ anEdge.isInPlane(aPlane)) {
+ bool isContains = false;
+ // Check that edge is not used.
+ // It is possible that the same edge will be taken from different faces
+ foreach(std::shared_ptr<ModuleBase_ViewerPrs> aPrs, aResult) {
+ GeomAPI_Edge aUsedEdge(aPrs->shape());
+ if (aUsedEdge.isEqual(aEdgeShape)) {
+ isContains = true;
+ break;
+ }
+ }
+ if (!isContains) {
+ std::shared_ptr<ModuleBase_ViewerPrs>
+ aPrs(new ModuleBase_ViewerPrs(aResObj, aEdgeShape));
+ aResult.append(aPrs);
+ }
+ }
+ }
+ }
+ }
+ }
+ return aResult;
+}
+
+//******************************************************
+void PartSet_WidgetSketchLabel::onChangePlane()
+{
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
+ if (aModule) {
+ mySizeOfViewWidget->setVisible(false);
+ myRemoveExternal->setVisible(true);
+ myStackWidget->setCurrentIndex(0);
+
+ bool aBodyIsVisualized = myPreviewPlanes->hasVisualizedBodies(myWorkshop);
+
+ if (!aBodyIsVisualized) {
+ // We have to select a plane before any operation
+ myPreviewPlanes->showPreviewPlanes(myWorkshop);
+ }
+
+ CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
+ PartSet_Tools::nullifySketchPlane(aSketch);
+
+ Handle(SelectMgr_Filter) aFilter = aModule->selectionFilter(SF_SketchPlaneFilter);
+ if (!aFilter.IsNull()) {
+ std::shared_ptr<GeomAPI_Pln> aPln;
+ Handle(ModuleBase_ShapeInPlaneFilter)::DownCast(aFilter)->setPlane(aPln);
+ }
+ XGUI_Workshop* aWorkshop = aModule->getWorkshop();
+
+ aWorkshop->selectionActivate()->updateSelectionFilters();
+ aWorkshop->selectionActivate()->updateSelectionModes();
+
+ SessionPtr aMgr = ModelAPI_Session::get();
+ aMgr->startOperation("Change Sketch plane");
+ myOpenTransaction = true;
+ myWorkshop->viewer()->update();
+ }
+}
+
+void PartSet_WidgetSketchLabel::setShowPointsState(bool theState)
+{
+ bool aBlock = myShowPoints->blockSignals(true);
+ myShowPoints->setChecked(theState);
+ myShowPoints->blockSignals(aBlock);
+}
+
+bool PartSet_WidgetSketchLabel::restoreValueCustom()
+{
+ if (myFeature.get()) {
+ CompositeFeaturePtr aSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
+ if (aSketch.get() && (aSketch->numberOfSubs() > 0)) {
+ AttributeStringPtr aDOFStr = aSketch->string("SolverDOF");
+ if (aDOFStr.get()) {
+ QString aVal(aDOFStr->value().c_str());
+ if (aVal.contains('=')) {
+ // to support old data
+ aVal = aVal.right(aVal.length() - aVal.lastIndexOf('='));
+ }
+ int aDoF = aVal.toInt();
+ if (aDoF == 0) {
+ myDoFLabel->setText(tr("Sketch is fully fixed (DoF = 0)"));
+ } else {
+ myDoFLabel->setText(tr("DoF (degrees of freedom) = ") + aVal);
+ }
+ }
+ }
+ else {
+ myDoFLabel->setText("");
+ }
+ }
+ return true;
+}