#include <gp_Dir.hxx>
#include <AIS_Shape.hxx>
#include <AIS_DimensionSelectionMode.hxx>
+#include <Bnd_Box.hxx>
#include <Config_WidgetAPI.h>
#include <Config_PropManager.h>
#include <QLabel>
#include <QApplication>
#include <QVBoxLayout>
+#include <QHBoxLayout>
#include <QCheckBox>
#include <QGroupBox>
#include <QPushButton>
#include <QStackedWidget>
+#include <QLineEdit>
+#include <QDoubleValidator>
+#ifndef DBL_MAX
+#define DBL_MAX 1.7976931348623158e+308
+#endif
PartSet_WidgetSketchLabel::PartSet_WidgetSketchLabel(QWidget* theParent,
ModuleBase_IWorkshop* theWorkshop,
// Define label for plane selection
QWidget* aFirstWgt = new QWidget(this);
+ // Size of the View control
+ mySizeOfViewWidget = new QWidget(aFirstWgt);
+ QHBoxLayout* aSizeLayout = new QHBoxLayout(mySizeOfViewWidget);
+ aSizeLayout->addWidget(new QLabel("Size of the view", mySizeOfViewWidget));
+ mySizeOfView = new QLineEdit(mySizeOfViewWidget);
+
+ QDoubleValidator* aValidator = new QDoubleValidator(0, DBL_MAX, 12, mySizeOfView);
+ aValidator->setLocale(ModuleBase_Tools::doubleLocale());
+ aValidator->setNotation(QDoubleValidator::StandardNotation);
+ mySizeOfView->setValidator(aValidator);
+ aSizeLayout->addWidget(mySizeOfView);
+
QString aText = QString::fromStdString(theData->getProperty("title"));
QLabel* aLabel = new QLabel(aText, aFirstWgt);
aLabel->setWordWrap(true);
aLayout = new QVBoxLayout(aFirstWgt);
ModuleBase_Tools::zeroMargins(aLayout);
+ aLayout->addWidget(mySizeOfViewWidget);
aLayout->addWidget(aLabel);
+ aLayout->addStretch(1);
myStackWidget->addWidget(aFirstWgt);
myViewInverted = new QCheckBox(tr("Reversed"), aViewBox);
aViewLayout->addWidget(myViewInverted);
- QPushButton* aSetViewBtn = new QPushButton(QIcon(":icons/plane_view.png"), tr("Set plane view"), aViewBox);
+ QPushButton* aSetViewBtn =
+ new QPushButton(QIcon(":icons/plane_view.png"), tr("Set plane view"), aViewBox);
connect(aSetViewBtn, SIGNAL(clicked(bool)), this, SLOT(onSetPlaneView()));
aViewLayout->addWidget(aSetViewBtn);
}
}
-bool PartSet_WidgetSketchLabel::setSelectionInternal(const QList<ModuleBase_ViewerPrsPtr>& theValues,
- const bool theToValidate)
+bool PartSet_WidgetSketchLabel::setSelectionInternal(
+ const QList<ModuleBase_ViewerPrsPtr>& theValues,
+ const bool theToValidate)
{
bool aDone = false;
if (theValues.empty()) {
// 2. if the planes were displayed, change the view projection
const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Shape> aGShape;
- std::shared_ptr<GeomAPI_Shape> aBaseShape;
DataPtr aData = feature()->data();
AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
// selection happens in OCC viewer
if (aShape.get() && !aShape->isNull()) {
aGShape = aShape;
-
- if (aSelAttr && aSelAttr->context()) {
- aBaseShape = aSelAttr->context()->shape();
- }
}
else { // selection happens in OCC viewer(on body) of in the OB browser
if (aSelAttr) {
aGShape = aSelAttr->value();
}
}
+ // If the selected object is a sketch then use its plane
+ std::shared_ptr<GeomAPI_Pln> aPlane;
+ ObjectPtr aObj = thePrs->object();
+ if (aObj.get()) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
+ if (aFeature.get() && (aFeature != feature())) {
+ if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
+ CompositeFeaturePtr aSketch =
+ std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
+ aPlane = PartSet_Tools::sketchPlane(aSketch);
+ }
+ }
+ }
if (aGShape.get() != NULL) {
// get plane parameters
- std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
- std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aFace);
+ if (!aPlane.get()) {
+ std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
+ aPlane = aFace->getPlane();
+ }
+ if (!aPlane.get())
+ return;
std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
double aTwist = 0.0;
// Rotate view if the sketcher plane is selected only from preview planes
// Preview planes are created only if there is no any shape
- bool aRotate = Config_PropManager::boolean("Sketch planes", "rotate_to_plane", "false");
+ bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane", "false");
if (aRotate) {
myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
if (aModule)
aModule->onViewTransformed();
}
+ QString aSizeOfViewStr = mySizeOfView->text();
+ if (!aSizeOfViewStr.isEmpty()) {
+ bool isOk;
+ double aSizeOfView = aSizeOfViewStr.toDouble(&isOk);
+ if (isOk && aSizeOfView > 0) {
+ Handle(V3d_View) aView3d = myWorkshop->viewer()->activeView();
+ if (!aView3d.IsNull()) {
+ Bnd_Box aBndBox;
+ double aHalfSize = aSizeOfView/2.0;
+ aBndBox.Update(-aHalfSize, -aHalfSize, -aHalfSize, aHalfSize, aHalfSize, aHalfSize);
+ aView3d->FitAll(aBndBox, 0.01, false);
+ }
+ }
+ }
}
// 3. Clear text in the label
myStackWidget->setCurrentIndex(1);
//myLabel->setText("");
//myLabel->setToolTip("");
XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
- disconnect(aWorkshop->selector(), SIGNAL(selectionChanged()),
+ disconnect(aWorkshop->selector(), SIGNAL(selectionChanged()),
this, SLOT(onSelectionChanged()));
// 4. deactivate face selection filter
activateFilters(false);
// 5. Clear selection mode and define sketching mode
- //XGUI_Displayer* aDisp = aWorkshop->displayer();
- //aDisp->closeLocalContexts();
emit planeSelected(plane());
// after the plane is selected in the sketch, the sketch selection should be activated
// it can not be performed in the sketch label widget because, we don't need to switch off
bool PartSet_WidgetSketchLabel::setSelectionCustom(const ModuleBase_ViewerPrsPtr& thePrs)
{
- return fillSketchPlaneBySelection(feature(), thePrs);
+ return fillSketchPlaneBySelection(thePrs);
}
bool PartSet_WidgetSketchLabel::canFillSketch(const ModuleBase_ViewerPrsPtr& thePrs)
return aCanFillSketch;
}
-bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const FeaturePtr& theFeature,
- const ModuleBase_ViewerPrsPtr& thePrs)
+bool PartSet_WidgetSketchLabel::fillSketchPlaneBySelection(const ModuleBase_ViewerPrsPtr& thePrs)
{
bool isOwnerSet = false;
const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Dir> aDir;
- if (thePrs->object() && (theFeature != thePrs->object())) {
- DataPtr aData = theFeature->data();
- AttributeSelectionPtr aSelAttr =
+ if (thePrs->object() && (feature() != thePrs->object())) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(thePrs->object());
+ if (aFeature.get() && (aFeature != feature())) {
+ if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
+ CompositeFeaturePtr aSketch =
+ std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
+ std::shared_ptr<GeomAPI_Pln> aPlane = PartSet_Tools::sketchPlane(aSketch);
+ if (aPlane.get()) {
+ aDir = setSketchPlane(aPlane);
+ return aDir.get();
+ }
+ }
+ }
+ DataPtr aData = feature()->data();
+ AttributeSelectionPtr aSelAttr =
std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
(aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
if (aSelAttr) {
}
else if (aShape.get() && !aShape->isNull()) {
const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
- aDir = setSketchPlane(theFeature, aTDShape);
+ aDir = setSketchPlane(aTDShape);
isOwnerSet = aDir.get();
}
return isOwnerSet;
if (!aBodyIsVisualized) {
// We have to select a plane before any operation
myPreviewPlanes->showPreviewPlanes(myWorkshop);
+ mySizeOfViewWidget->setVisible(true);
}
- activateSelection(true);
+ else
+ mySizeOfViewWidget->setVisible(false);
- //myLabel->setText(myText);
- //myLabel->setToolTip(myTooltip);
+ activateSelection(true);
connect(XGUI_Tools::workshop(myWorkshop)->selector(), SIGNAL(selectionChanged()),
this, SLOT(onSelectionChanged()));
}
-std::shared_ptr<GeomAPI_Dir> PartSet_WidgetSketchLabel::setSketchPlane(const FeaturePtr& theFeature,
- const TopoDS_Shape& theShape)
+std::shared_ptr<GeomAPI_Dir>
+ PartSet_WidgetSketchLabel::setSketchPlane(const TopoDS_Shape& theShape)
{
if (theShape.IsNull())
return std::shared_ptr<GeomAPI_Dir>();
std::shared_ptr<GeomAPI_Shape> aGShape(new GeomAPI_Shape);
aGShape->setImpl(new TopoDS_Shape(theShape));
-
-
// get plane parameters
std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
- std::shared_ptr<GeomAPI_Pln> aPlane = GeomAlgoAPI_FaceBuilder::plane(aFace);
+ std::shared_ptr<GeomAPI_Pln> aPlane = aFace->getPlane();
if (!aPlane.get())
return std::shared_ptr<GeomAPI_Dir>();
+ return setSketchPlane(aPlane);
+}
+std::shared_ptr<GeomAPI_Dir>
+ PartSet_WidgetSketchLabel::setSketchPlane(std::shared_ptr<GeomAPI_Pln> thePlane)
+{
// set plane parameters to feature
- std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
+ std::shared_ptr<ModelAPI_Data> aData = feature()->data();
double anA, aB, aC, aD;
- aPlane->coefficients(anA, aB, aC, aD);
+ thePlane->coefficients(anA, aB, aC, aD);
// calculate attributes of the sketch
std::shared_ptr<GeomAPI_Dir> aNormDir(new GeomAPI_Dir(anA, aB, aC));
std::shared_ptr<GeomDataAPI_Dir> aDirX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
aDirX->setValue(aXDir);
- std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
+ std::shared_ptr<GeomAPI_Dir> aDir = thePlane->direction();
return aDir;
}
