#include "SketchPlugin_SketchEntity.h"
-#include <XGUI_Workshop.h>
+#include <XGUI_ActionsMgr.h>
#include <XGUI_Displayer.h>
-#include <XGUI_SelectionMgr.h>
+#include <XGUI_ModuleConnector.h>
+#include <XGUI_SelectionActivate.h>
#include <XGUI_Selection.h>
-#include <XGUI_ViewerProxy.h>
-#include <XGUI_ActionsMgr.h>
+#include <XGUI_SelectionMgr.h>
#include <XGUI_Tools.h>
-#include <XGUI_ModuleConnector.h>
+#include <XGUI_ViewerProxy.h>
+#include <XGUI_Workshop.h>
+
+#include <ModelAPI_ResultBody.h>
+#include <ModelAPI_Tools.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_ViewerPrs.h>
#include <ModuleBase_Tools.h>
#include <ModuleBase_IModule.h>
-#include <ModelAPI_ResultBody.h>
-#include <ModelAPI_Tools.h>
-
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomAlgoAPI_ShapeTools.h>
#include <GeomDataAPI_Point.h>
return aResult;
}
-void PartSet_WidgetSketchLabel::onSelectionChanged()
+bool PartSet_WidgetSketchLabel::processSelection()
{
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (aPlane.get())
+ return false;
+
QList<ModuleBase_ViewerPrsPtr> aSelected = getFilteredSelected();
if (aSelected.empty())
- return;
+ return false;
ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
bool aDone = setSelectionInternal(aSelected, false);
if (aDone) {
updateByPlaneSelected(aPrs);
updateObject(myFeature);
}
+
+ return aDone;
}
void PartSet_WidgetSketchLabel::onShowConstraint(bool theOn)
void PartSet_WidgetSketchLabel::updateByPlaneSelected(const ModuleBase_ViewerPrsPtr& thePrs)
{
+ GeomPlanePtr aPlane = plane();
+ if (!aPlane.get())
+ return;
// 1. hide main planes if they have been displayed and display sketch preview plane
myPreviewPlanes->erasePreviewPlanes(myWorkshop);
aModule->sketchMgr()->previewSketchPlane()->setSizeOfView(aSizeOfView, false);
}
// 2. if the planes were displayed, change the view projection
- const GeomShapePtr& aShape = thePrs->shape();
- std::shared_ptr<GeomAPI_Shape> aGShape;
- DataPtr aData = feature()->data();
- AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
- (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+ std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
+ gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
+ double aTwist = 0.0;
- // selection happens in OCC viewer
- if (aShape.get() && !aShape->isNull()) {
- aGShape = aShape;
+ // Rotate view if the sketcher plane is selected only from preview planes
+ // Preview planes are created only if there is no any shape
+ bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane");
+ if (aRotate) {
+ myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
}
- else { // selection happens in OCC viewer(on body) of in the OB browser
- if (aSelAttr) {
- aGShape = aSelAttr->value();
- }
- }
- // If the selected object is a sketch then use its plane
- std::shared_ptr<GeomAPI_Pln> aPlane;
- ObjectPtr aObj = thePrs->object();
- // obsolete as selected sketch is stored in external attribute
- /*if (aObj.get()) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
- if (aFeature.get() && (aFeature != feature())) {
- if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
- CompositeFeaturePtr aSketch =
- std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
- aPlane = PartSet_Tools::sketchPlane(aSketch);
+ QString aSizeOfViewStr = mySizeOfView->text();
+ if (!aSizeOfViewStr.isEmpty()) {
+ bool isOk;
+ double aSizeOfView = aSizeOfViewStr.toDouble(&isOk);
+ if (isOk && aSizeOfView > 0) {
+ Handle(V3d_View) aView3d = myWorkshop->viewer()->activeView();
+ if (!aView3d.IsNull()) {
+ Bnd_Box aBndBox;
+ double aHalfSize = aSizeOfView/2.0;
+ aBndBox.Update(-aHalfSize, -aHalfSize, -aHalfSize, aHalfSize, aHalfSize, aHalfSize);
+ aView3d->FitAll(aBndBox, 0.01, false);
}
}
- }*/
- if (aGShape.get() != NULL) {
- // get plane parameters
- if (!aPlane.get()) {
- std::shared_ptr<GeomAPI_Face> aFace(new GeomAPI_Face(aGShape));
- aPlane = aFace->getPlane();
- }
- if (!aPlane.get())
- return;
- std::shared_ptr<GeomAPI_Dir> aDir = aPlane->direction();
- gp_XYZ aXYZ = aDir->impl<gp_Dir>().XYZ();
- double aTwist = 0.0;
-
- // orienting projection is not needed: it is done in GeomAlgoAPI_FaceBuilder::plane
- /*if (aGShape->impl<TopoDS_Shape>().Orientation() == TopAbs_REVERSED) {
- aXYZ.Reverse();
- }*/
-
- // Rotate view if the sketcher plane is selected only from preview planes
- // Preview planes are created only if there is no any shape
- bool aRotate = Config_PropManager::boolean(SKETCH_TAB_NAME, "rotate_to_plane");
- if (aRotate) {
- myWorkshop->viewer()->setViewProjection(aXYZ.X(), aXYZ.Y(), aXYZ.Z(), aTwist);
- }
- PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(myWorkshop->module());
- if (aModule)
- aModule->onViewTransformed();
}
+ if (aModule)
+ aModule->onViewTransformed();
+
// 3. Clear text in the label
myStackWidget->setCurrentIndex(1);
//myLabel->setText("");
//myLabel->setToolTip("");
XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
- disconnect(aWorkshop->selector(), SIGNAL(selectionChanged()),
- this, SLOT(onSelectionChanged()));
- // 4. deactivate face selection filter
- activateFilters(false);
// 5. Clear selection mode and define sketching mode
emit planeSelected(plane());
// after the plane is selected in the sketch, the sketch selection should be activated
// it can not be performed in the sketch label widget because, we don't need to switch off
// the selection by any label deactivation, but need to switch it off by stop the sketch
- activateSelection(true);
+ myWorkshop->selectionActivate()->updateSelectionFilters();
+ myWorkshop->selectionActivate()->updateSelectionModes();
// 6. Update sketcher actions
XGUI_ActionsMgr* anActMgr = aWorkshop->actionsMgr();
const GeomShapePtr& aShape = thePrs->shape();
std::shared_ptr<GeomAPI_Dir> aDir;
+ if (aShape.get() && !aShape->isNull()) {
+ const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
+ aDir = setSketchPlane(aTDShape);
+ isOwnerSet = aDir.get();
+ }
if (thePrs->object() && (feature() != thePrs->object())) {
FeaturePtr aFeature = ModelAPI_Feature::feature(thePrs->object());
DataPtr aData = feature()->data();
AttributeSelectionPtr aSelAttr =
std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
(aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
- if (aSelAttr) {
+ if (aSelAttr.get()) {
ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(thePrs->object());
- if (aRes) {
- GeomShapePtr aShapePtr(new GeomAPI_Shape());
+ if (aRes.get()) {
+ GeomShapePtr aShapePtr;
if (!aShape.get() || aShape->isNull()) { // selection happens in the OCC viewer
aShapePtr = ModelAPI_Tools::shape(aRes);
}
else { // selection happens in OB browser
aShapePtr = aShape;
}
- if (aShapePtr.get() != NULL) {
+ if (aShapePtr.get() && aShapePtr->isFace()) {
+ const TopoDS_Shape& aTDShape = aShapePtr->impl<TopoDS_Shape>();
+ setSketchPlane(aTDShape);
aSelAttr->setValue(aRes, aShapePtr);
isOwnerSet = true;
}
}
+ else {
+ aSelAttr->setValue(aFeature, GeomShapePtr());
+ GeomShapePtr aShape = aSelAttr->value();
+ if (!aShape.get() && aSelAttr->contextFeature().get() &&
+ aSelAttr->contextFeature()->firstResult().get()) {
+ aShape = aSelAttr->contextFeature()->firstResult()->shape();
+ }
+ if (aShape.get() && aShape->isPlanar()) {
+ const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
+ setSketchPlane(aTDShape);
+ isOwnerSet = true;
+ }
+ }
}
}
- else if (aShape.get() && !aShape->isNull()) {
- const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
- aDir = setSketchPlane(aTDShape);
- isOwnerSet = aDir.get();
- }
return isOwnerSet;
}
std::shared_ptr<GeomAPI_Pln> aPlane = plane();
if (aPlane.get()) {
myStackWidget->setCurrentIndex(1);
- activateSelection(true);
return;
}
// Clear previous selection mode It is necessary for correct activation of preview planes
XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
XGUI_Displayer* aDisp = aWorkshop->displayer();
- aDisp->activateObjects(QIntList(), aDisp->displayedObjects(), false);
+ aWorkshop->selectionActivate()->activateObjects(QIntList(), aDisp->displayedObjects(), false);
if (!aBodyIsVisualized) {
// We have to select a plane before any operation
}
else
mySizeOfViewWidget->setVisible(false);
-
- activateSelection(true);
-
- connect(XGUI_Tools::workshop(myWorkshop)->selector(), SIGNAL(selectionChanged()),
- this, SLOT(onSelectionChanged()));
- activateFilters(true);
}
void PartSet_WidgetSketchLabel::deactivate()
{
- ModuleBase_ModelWidget::deactivate();
+ ModuleBase_WidgetValidated::deactivate();
bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
myPreviewPlanes->erasePreviewPlanes(myWorkshop);
- activateSelection(false);
- activateFilters(false);
if (aHidePreview)
myWorkshop->viewer()->update();
}
-void PartSet_WidgetSketchLabel::activateSelection(bool toActivate)
+void PartSet_WidgetSketchLabel::selectionModes(int& theModuleSelectionModes, QIntList& theModes)
{
- if (toActivate) {
- QIntList aModes;
- std::shared_ptr<GeomAPI_Pln> aPlane = plane();
- if (aPlane.get()) {
- myWorkshop->module()->activeSelectionModes(aModes);
- }
- else {
- aModes << TopAbs_FACE;
- }
- myWorkshop->activateSubShapesSelection(aModes);
- } else {
- myWorkshop->deactivateSubShapesSelection();
- }
+ theModuleSelectionModes = -1;
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (!aPlane.get())
+ theModes << TopAbs_FACE;
}
+void PartSet_WidgetSketchLabel::selectionFilters(QIntList& theModuleSelectionFilters,
+ SelectMgr_ListOfFilter& theSelectionFilters)
+{
+ std::shared_ptr<GeomAPI_Pln> aPlane = plane();
+ if (aPlane.get())
+ return;
+ return ModuleBase_WidgetValidated::selectionFilters(theModuleSelectionFilters,
+ theSelectionFilters);
+}
std::shared_ptr<GeomAPI_Dir>
PartSet_WidgetSketchLabel::setSketchPlane(const TopoDS_Shape& theShape)
