#include "PartSet_WidgetSketchCreator.h"
#include "PartSet_Module.h"
+#include "PartSet_WidgetSketchLabel.h"
+#include "PartSet_PreviewPlanes.h"
+
+#include <Config_Keywords.h>
#include <XGUI_ModuleConnector.h>
#include <XGUI_Workshop.h>
#include <XGUI_Displayer.h>
#include <XGUI_SelectionMgr.h>
#include <XGUI_OperationMgr.h>
+#include <XGUI_PropertyPanel.h>
+#include <XGUI_Tools.h>
+#include <XGUI_ViewerProxy.h>
#include <GeomAPI_Face.h>
+#include <Events_InfoMessage.h>
+
#include <ModelAPI_Session.h>
#include <ModelAPI_ResultBody.h>
#include <ModelAPI_AttributeSelection.h>
#include <ModelAPI_AttributeSelectionList.h>
+#include <ModelAPI_Validator.h>
+#include <ModelAPI_Events.h>
+#include <ModelAPI_ResultConstruction.h>
#include <SketchPlugin_SketchEntity.h>
#include <FeaturesPlugin_CompositeBoolean.h>
#include <ModuleBase_Tools.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_IPropertyPanel.h>
+#include <ModuleBase_OperationFeature.h>
+#include <ModuleBase_ViewerPrs.h>
+
#include <Config_WidgetAPI.h>
+#include <Events_Loop.h>
+
#include <QLabel>
#include <QLineEdit>
-#include <QFormLayout>
+//#include <QFormLayout>
+#include <QVBoxLayout>
#include <QMessageBox>
+#include <QMainWindow>
+
+#define DEBUG_UNDO_INVALID_SKETCH
PartSet_WidgetSketchCreator::PartSet_WidgetSketchCreator(QWidget* theParent,
PartSet_Module* theModule,
- const Config_WidgetAPI* theData,
- const std::string& theParentId)
-: ModuleBase_ModelWidget(theParent, theData, theParentId), myModule(theModule)
+ const Config_WidgetAPI* theData)
+: ModuleBase_WidgetSelector(theParent, theModule->workshop(), theData),
+ myModule(theModule), myIsCustomAttribute(false)
{
- QFormLayout* aLayout = new QFormLayout(this);
+ myAttributeListID = theData->getProperty("attribute_list_id");
+
+ //QFormLayout* aLayout = new QFormLayout(this);
+ QVBoxLayout* aLayout = new QVBoxLayout(this);
+ ModuleBase_Tools::zeroMargins(aLayout);
+
ModuleBase_Tools::adjustMargins(aLayout);
QString aLabelText = QString::fromStdString(theData->widgetLabel());
QString aLabelIcon = QString::fromStdString(theData->widgetIcon());
- myLabel = new QLabel(aLabelText, this);
- if (!aLabelIcon.isEmpty())
- myLabel->setPixmap(QPixmap(aLabelIcon));
+ myLabel = new QLabel(aLabelText, this);
+ myLabel->setWordWrap(true);
+ aLayout->addWidget(myLabel);
+ aLayout->addStretch(1);
- QString aToolTip = QString::fromStdString(theData->widgetTooltip());
- myTextLine = new QLineEdit(this);
- myTextLine->setReadOnly(true);
- myTextLine->setToolTip(aToolTip);
- myTextLine->installEventFilter(this);
+ std::string aTypes = theData->getProperty("shape_types");
+ myShapeTypes = QString(aTypes.c_str()).split(' ', QString::SkipEmptyParts);
- aLayout->addRow(myLabel, myTextLine);
+ myPreviewPlanes = new PartSet_PreviewPlanes();
}
PartSet_WidgetSketchCreator::~PartSet_WidgetSketchCreator()
{
+ // we need to deactivate here in order to hide preview planes if the selection mode is
+ // active
+ deactivate();
}
QList<QWidget*> PartSet_WidgetSketchCreator::getControls() const
{
QList<QWidget*> aControls;
- aControls.append(myTextLine);
+ aControls.append(myLabel);
return aControls;
}
-bool PartSet_WidgetSketchCreator::restoreValue()
+bool PartSet_WidgetSketchCreator::restoreValueCustom()
{
- CompositeFeaturePtr aCompFeature =
- std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
- if (aCompFeature->numberOfSubs() > 0) {
- FeaturePtr aSubFeature = aCompFeature->subFeature(0);
- myTextLine->setText(QString::fromStdString(aSubFeature->data()->name()));
- }
return true;
}
-bool PartSet_WidgetSketchCreator::storeValueCustom() const
+bool PartSet_WidgetSketchCreator::storeValueCustom()
{
return true;
}
-void PartSet_WidgetSketchCreator::activateCustom()
+AttributePtr PartSet_WidgetSketchCreator::attribute() const
{
- CompositeFeaturePtr aCompFeature =
- std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
- if (aCompFeature->numberOfSubs() == 0)
- connect(myModule, SIGNAL(operationLaunched()), SLOT(onStarted()));
-}
-
-void PartSet_WidgetSketchCreator::onStarted()
-{
- disconnect(myModule, SIGNAL(operationLaunched()), this, SLOT(onStarted()));
-
- // Check that model already has bodies
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
- XGUI_Displayer* aDisp = aWorkshop->displayer();
- QObjectPtrList aObjList = aDisp->displayedObjects();
- bool aHasBody = false;
- ResultBodyPtr aBody;
- foreach(ObjectPtr aObj, aObjList) {
- aBody = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObj);
- if (aBody.get() != NULL) {
- aHasBody = true;
- break;
+ AttributePtr anAttribute;
+ if (myIsCustomAttribute)
+ anAttribute = myFeature->attribute(myAttributeListID);
+ else
+ anAttribute = ModuleBase_WidgetSelector::attribute();
+
+ return anAttribute;
+}
+
+//********************************************************************
+void PartSet_WidgetSketchCreator::openExtrusionTransaction()
+{
+ SessionPtr aMgr = ModelAPI_Session::get();
+ bool aIsOp = aMgr->isOperation();
+ if (!aIsOp) {
+ const static std::string aNestedOpID("Parameters modification");
+ aMgr->startOperation(aNestedOpID, true);
+ }
+}
+
+//********************************************************************
+bool PartSet_WidgetSketchCreator::isValidSelection(const ModuleBase_ViewerPrsPtr& theValue)
+{
+ bool aValid = false;
+ if (myIsCustomAttribute) {
+ // check only suiting of the value to custom attribute (myAttributeListID)
+ // do not cash of validation to avoid using states, stored for XML attribute
+ // there is an alternative is to call clearValidatedCash() in setSelection()
+ aValid = isValidSelectionForAttribute(theValue, attribute());
+ }
+ else { /// if the validated attribute is already custom
+ if (getValidState(theValue, aValid)) {
+ return aValid;
+ }
+ aValid = isValidSelectionCustom(theValue);
+ if (!aValid)
+ // check selection to create new sketh (XML current attribute)
+ aValid = isValidSelectionForAttribute(theValue, attribute());
+ if (!aValid) {
+ // check selection to fill list attribute (myAttributeListID)
+ bool isCustomAttribute = myIsCustomAttribute;
+ myIsCustomAttribute = true;
+ aValid = isValidSelectionForAttribute(theValue, attribute());
+ myIsCustomAttribute = isCustomAttribute;
}
}
+ storeValidState(theValue, aValid);
+ return aValid;
+}
+
+//********************************************************************
+bool PartSet_WidgetSketchCreator::isValidSelectionCustom(const ModuleBase_ViewerPrsPtr& theValue)
+{
+ return PartSet_WidgetSketchLabel::canFillSketch(theValue);
+}
+
+void PartSet_WidgetSketchCreator::activateSelectionControl()
+{
+ // we need to call activate here as the widget has no focus accepted controls
+ // if these controls are added here, activate will happens automatically after focusIn()
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myModule->workshop());
+ XGUI_PropertyPanel* aPanel = aWorkshop->propertyPanel();
+ aPanel->activateWidget(this, false);
+}
- if (aHasBody) {
- // Launch Sketch operation
- CompositeFeaturePtr aCompFeature =
- std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
- FeaturePtr aSketch = aCompFeature->addFeature("Sketch");
+void PartSet_WidgetSketchCreator::setVisibleSelectionControl(const bool theSelectionControl)
+{
+ // hide current widget, activate the next widget
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myModule->workshop());
+ XGUI_PropertyPanel* aPanel = aWorkshop->propertyPanel();
+ const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
+ foreach(ModuleBase_ModelWidget* aWidget, aWidgets) {
+ if (theSelectionControl) { // hide other controls
+ if (aWidget != this)
+ aWidget->setVisible(false);
+ }
+ else { // hide current control
+ if (aWidget == this)
+ aWidget->setVisible(false);
+ else {
+ aWidget->setVisible(true);
+ if (aWidget->attributeID() == myAttributeListID)
+ setEnabledModelWidget(aWidget, !hasSubObjects());
+ }
+ }
+ }
- ModuleBase_Operation* anOperation = myModule->createOperation("Sketch");
- anOperation->setFeature(aSketch);
- myModule->sendOperation(anOperation);
- //connect(anOperation, SIGNAL(aborted()), aWorkshop->operationMgr(), SLOT(abortAllOperations()));
+ if (theSelectionControl) {
+ bool aBodyIsVisualized = myPreviewPlanes->hasVisualizedBodies(myWorkshop);
+ bool aSketchIsVisualized = myPreviewPlanes->hasVisualizedSketch(myWorkshop);
+ if (!aBodyIsVisualized && !aSketchIsVisualized) {
+ // We have to select a plane before any operation
+ myPreviewPlanes->showPreviewPlanes(myWorkshop);
+ }
} else {
- // Break current operation
- QMessageBox::warning(this, tr("Extrusion Cut"),
- tr("There are no bodies found. Operation aborted."), QMessageBox::Ok);
- ModuleBase_Operation* aOp = myModule->workshop()->currentOperation();
- aOp->abort();
+ bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
+ myPreviewPlanes->erasePreviewPlanes(myWorkshop);
+ if (aHidePreview)
+ aWorkshop->viewer()->update();
}
}
-bool PartSet_WidgetSketchCreator::focusTo()
+QIntList PartSet_WidgetSketchCreator::shapeTypes() const
{
+ QIntList aShapeTypes;
+ foreach(QString aType, myShapeTypes) {
+ aShapeTypes.append(ModuleBase_Tools::shapeType(aType));
+ }
+ return aShapeTypes;
+}
+
+void PartSet_WidgetSketchCreator::setEditingMode(bool isEditing)
+{
+ ModuleBase_ModelWidget::setEditingMode(isEditing);
+ if (isEditing) {
+ setVisibleSelectionControl(false);
+
+ ModuleBase_ModelWidget* anAttributeListWidget = 0;
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myModule->workshop());
+ XGUI_PropertyPanel* aPanel = aWorkshop->propertyPanel();
+ const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
+ foreach(ModuleBase_ModelWidget* aWidget, aWidgets) {
+ if (aWidget->attributeID() == myAttributeListID) {
+ anAttributeListWidget = aWidget;
+ break;
+ }
+ }
+ if (anAttributeListWidget)
+ setEnabledModelWidget(anAttributeListWidget, !hasSubObjects());
+ }
+}
+
+bool PartSet_WidgetSketchCreator::isSelectionMode() const
+{
+ AttributeSelectionListPtr anAttrList = myFeature->data()->selectionList(myAttributeListID);
+ bool aHasValueInList = anAttrList.get() && anAttrList->size() > 0;
+
+ return !aHasValueInList;
+}
+
+bool PartSet_WidgetSketchCreator::hasSubObjects() const
+{
+ bool aHasSubObjects = false;
+
+ bool aCanSetFocus = true;
+ CompositeFeaturePtr aComposite = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
+ if (aComposite.get())
+ aHasSubObjects = aComposite->numberOfSubs() > 0;
+ return aHasSubObjects;
+}
+
+bool PartSet_WidgetSketchCreator::setSelection(QList<ModuleBase_ViewerPrsPtr>& theValues,
+ const bool theToValidate)
+{
+ bool aDone = false;
+ if (!startSketchOperation(theValues)) {
+ myIsCustomAttribute = true;
+ QList<ModuleBase_ViewerPrsPtr>::const_iterator
+ anIt = theValues.begin(), aLast = theValues.end();
+ bool aProcessed = false;
+ for (; anIt != aLast; anIt++) {
+ ModuleBase_ViewerPrsPtr aValue = *anIt;
+ if (!theToValidate || isValidInFilters(aValue))
+ aProcessed = setSelectionCustom(aValue) || aProcessed;
+ }
+ myIsCustomAttribute = false;
+ aDone = aProcessed;
+ if (aProcessed) {
+ emit valuesChanged();
+ updateObject(myFeature);
+ setVisibleSelectionControl(false);
+ // manually deactivation because the widget was
+ // not activated as has no focus acceptin controls
+ deactivate();
+ emit focusOutWidget(this);
+ }
+ }
+ return aDone;
+}
+
+//********************************************************************
+void PartSet_WidgetSketchCreator::onSelectionChanged()
+{
+ QList<ModuleBase_ViewerPrsPtr> aSelected = getFilteredSelected();
+ bool isDone = setSelection(aSelected, true/*false*/);
+}
+
+//********************************************************************
+void PartSet_WidgetSketchCreator::updateOnSelectionChanged(const bool theDone)
+{
+}
+
+bool PartSet_WidgetSketchCreator::startSketchOperation(
+ const QList<ModuleBase_ViewerPrsPtr>& theValues)
+{
+ bool aSketchStarted = false;
+
+ if (theValues.size() != 1)
+ return aSketchStarted;
+
+ ModuleBase_ViewerPrsPtr aValue = theValues.front();
+ if (!aValue.get() || !PartSet_WidgetSketchLabel::canFillSketch(aValue))
+ return aSketchStarted;
+
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(aValue->object());
+ /// sketch should not started by object(face) selected as global. If Local face is selected,
+ /// sketch is started
+ if (aResult.get() && aValue->shape().get() && aResult->shape()->isEqual(aValue->shape())) {
+ ResultConstructionPtr aConstruction =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(aResult);
+ if (!aConstruction.get() || !aConstruction->isInfinite())
+ return aSketchStarted;
+ }
+ aSketchStarted = true;
+
+ // manually deactivation because the widget was not activated as has no focus acceptin controls
+ deactivate();
+ bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
+ myPreviewPlanes->erasePreviewPlanes(myWorkshop);
+
+ // Launch Sketch operation
CompositeFeaturePtr aCompFeature =
std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
- if (aCompFeature->numberOfSubs() == 0)
- return ModuleBase_ModelWidget::focusTo();
- connect(myModule, SIGNAL(operationResumed(ModuleBase_Operation*)), SLOT(onResumed(ModuleBase_Operation*)));
- SessionPtr aMgr = ModelAPI_Session::get();
- // Open transaction that is general for the previous nested one: it will be closed on nested commit
- bool aIsOp = aMgr->isOperation();
- if (!aIsOp) {
- const static std::string aNestedOpID("Parameters modification");
- aMgr->startOperation(aNestedOpID, true);
+ // start edit operation for the sketch
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myModule->createOperation("Sketch"));
+ QList<ModuleBase_ViewerPrsPtr> aValues;
+ aValues.push_back(aValue);
+ aFOperation->setPreselection(aValues);
+
+ myWorkshop->processLaunchOperation(aFOperation);
+
+ return aSketchStarted;
+}
+
+bool PartSet_WidgetSketchCreator::focusTo()
+{
+ // this method is called only in creation mode. In Edition mode this widget is hidden
+ if (isSelectionMode() && !hasSubObjects()) {
+ setVisibleSelectionControl(true);
+ activateSelectionControl();
+ openExtrusionTransaction();
+ return true;
}
+ else
+ connect(myModule, SIGNAL(resumed(ModuleBase_Operation*)),
+ SLOT(onResumed(ModuleBase_Operation*)));
+
+ return true;
+}
+
+void PartSet_WidgetSketchCreator::deactivate()
+{
+ ModuleBase_WidgetSelector::deactivate();
+
+ bool aHidePreview = myPreviewPlanes->isPreviewDisplayed();
+ myPreviewPlanes->erasePreviewPlanes(myWorkshop);
+ if (aHidePreview)
+ XGUI_Tools::workshop(myWorkshop)->viewer()->update();
- restoreValue();
- return false;
}
void PartSet_WidgetSketchCreator::onResumed(ModuleBase_Operation* theOp)
{
+ SessionPtr aMgr = ModelAPI_Session::get();
+ bool aIsOp = aMgr->isOperation();
+ if (aIsOp) {
+ // in current implementation, all transactions are closed when resume happens
+ // so, this is a wrong case, which is not checked.
+ // To provide it, make correction in later rows about abort/undo transactions
+ return;
+ }
+ // Set visible only selection control
+ setVisibleSelectionControl(true);
+
+ // Validate the created sketch. If it is valid, it is set into the composite feature selection
+ // list, otherwise it is removed
CompositeFeaturePtr aCompFeature =
std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(myFeature);
- CompositeFeaturePtr aSketchFeature =
- std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aCompFeature->subFeature(0));
- if (aSketchFeature->numberOfSubs() == 0) {
- // Abort operation
+ AttributeSelectionListPtr anAttrList = myFeature->data()->selectionList(myAttributeListID);
+ if (aCompFeature->numberOfSubs() > 0) {
+ // set the sub feature to attribute selection list and check whether sketch is valid
SessionPtr aMgr = ModelAPI_Session::get();
- // Close transaction
- /*
- bool aIsOp = aMgr->isOperation();
- if (aIsOp) {
- const static std::string aNestedOpID("Parameters cancelation");
- aMgr->startOperation(aNestedOpID, true);
+ const static std::string aNestedOpID("Set Sketch result into Selection list");
+ aMgr->startOperation(aNestedOpID, false); // false to not attach to Extrusion operation
+ setSketchObjectToList(aCompFeature, anAttrList);
+ aMgr->finishOperation();
+
+ if (!validateSelectionList()) {
+#ifdef DEBUG_UNDO_INVALID_SKETCH
+ aMgr->undo(); // Extrusion modification parameters: setSketchObjectToList()
+ aMgr->undo(); /// Sketch creation
+#else
+ aMgr->startOperation("Delete invalid Sketch feature", false);
+
+ // delete invalid sketch
+ CompositeFeaturePtr aSketchFeature =
+ std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aCompFeature->subFeature(0));
+ QObjectPtrList anObjects;
+ anObjects.append(aSketchFeature);
+
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myModule->workshop());
+ aWorkshop->deleteFeatures(anObjects);
+
+ aMgr->finishOperation();
+#endif
}
- */
- theOp->abort();
- } else {
+ }
+ openExtrusionTransaction();
+
+ if (aCompFeature->numberOfSubs() == 0) {
+ // call activateWidget() of the parent to connect to the viewer seleciton
+ activateSelectionControl();
+ }
+ else {
+ // check if the created sketch is valid. If it is invalid, it will be deleted with warning else
+ /// the attribute selection list will be filled by result of this sketch.
+ setVisibleSelectionControl(false);
+
+ // Update value in attribute selection list
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myModule->workshop());
+ XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
+ const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
+ ModuleBase_ModelWidget* aListWidget = 0;
+ foreach(ModuleBase_ModelWidget* aWidget, aWidgets) {
+ if (aWidget->attributeID() == myAttributeListID) {
+ aListWidget = aWidget;
+ break;
+ }
+ }
+ if (aListWidget) {
+ aListWidget->restoreValue();
+ aPropertyPanel->activateNextWidget(aListWidget);
+ }
+
// Hide sketcher result
+ CompositeFeaturePtr aSketchFeature =
+ std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aCompFeature->subFeature(0));
std::list<ResultPtr> aResults = aSketchFeature->results();
std::list<ResultPtr>::const_iterator aIt;
for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
(*aIt)->setDisplayed(false);
}
aSketchFeature->setDisplayed(false);
+ static Events_Loop* aLoop = Events_Loop::loop();
+ aLoop->flush(aLoop->eventByName(EVENT_OBJECT_TO_REDISPLAY));
// Add Selected body were created the sketcher to list of selected objects
- DataPtr aData = aSketchFeature->data();
- AttributeSelectionPtr aSelAttr =
- std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
- (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
- if (aSelAttr.get()) {
- ResultPtr aRes = aSelAttr->context();
- GeomShapePtr aShape = aSelAttr->value();
+ std::string anObjectsAttribute = FeaturesPlugin_CompositeBoolean::OBJECTS_ID();
+ AttributeSelectionListPtr aSelList = aCompFeature->data()->selectionList(anObjectsAttribute);
+ if (aSelList.get()) {
+ DataPtr aData = aSketchFeature->data();
+ AttributeSelectionPtr aSelAttr = std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+ ResultPtr aRes = aSelAttr.get() ? aSelAttr->context() : ResultPtr();
if (aRes.get()) {
- AttributeSelectionListPtr aSelList =
- aCompFeature->data()->selectionList(FeaturesPlugin_CompositeBoolean::BOOLEAN_OBJECTS_ID());
+ SessionPtr aMgr = ModelAPI_Session::get();
+ ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
+ AttributePtr anAttribute = myFeature->attribute(anObjectsAttribute);
+ std::string aValidatorID;
+ Events_InfoMessage anError;
aSelList->append(aRes, GeomShapePtr());
- updateObject(aCompFeature);
+ if (aFactory->validate(anAttribute, aValidatorID, anError))
+ updateObject(aCompFeature);
+ else
+ aSelList->clear();
}
}
}
+ restoreValue();
+}
+
+bool PartSet_WidgetSketchCreator::validateSelectionList() const
+{
+ AttributeSelectionListPtr anAttrList = myFeature->data()->selectionList(myAttributeListID);
+
+ SessionPtr aMgr = ModelAPI_Session::get();
+ ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
+ std::string aValidatorID;
+ Events_InfoMessage anError;
+ bool isValidPComposite = aFactory->validate(anAttrList, aValidatorID, anError);
+ if (!isValidPComposite) {
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myModule->workshop());
+ // TODO(spo): translate
+ QMessageBox::question(aWorkshop->desktop(), tr("Apply current feature"),
+ tr("Sketch is invalid and will be deleted.\nError: %1")
+ .arg(anError.messageString().c_str()),
+ QMessageBox::Ok);
+ }
+ return isValidPComposite;
+}
+
+void PartSet_WidgetSketchCreator::setSketchObjectToList(
+ const CompositeFeaturePtr& theCompositeFeature,
+ const AttributePtr& theAttribute)
+{
+ if (!theCompositeFeature.get() || theCompositeFeature->numberOfSubs() != 1)
+ return;
+
+ AttributeSelectionListPtr aBaseObjectsSelectionList =
+ std::dynamic_pointer_cast<ModelAPI_AttributeSelectionList>(theAttribute);
+ if(!aBaseObjectsSelectionList.get() || aBaseObjectsSelectionList->isInitialized()) {
+ return;
+ }
+
+ FeaturePtr aSketchFeature = theCompositeFeature->subFeature(0);
+ if(!aSketchFeature.get() || aSketchFeature->results().empty()) {
+ return;
+ }
+
+ ResultPtr aSketchRes = aSketchFeature->results().front();
+ ResultConstructionPtr aConstruction =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(aSketchRes);
+ if(!aConstruction.get()) {
+ return;
+ }
+
+ if(aBaseObjectsSelectionList->size() == 0) {
+ aBaseObjectsSelectionList->append(aSketchRes, GeomShapePtr());
+ }
+}
+
+void PartSet_WidgetSketchCreator::setEnabledModelWidget(ModuleBase_ModelWidget* theModelWidget,
+ const bool theEnabled)
+{
+ QList<QWidget*> aMyControls = theModelWidget->getControls();
+ foreach(QWidget* eachControl, aMyControls) {
+ eachControl->setEnabled(theEnabled);
+ }
}
