#include <ModelAPI_AttributeRefAttr.h>
#include <ModelAPI_Session.h>
#include <ModelAPI_Validator.h>
-#include <ModelAPI_RefAttrValidator.h>
-#include <ModelAPI_ResultValidator.h>
+
+#include <ModuleBase_Definitions.h>
#include <PartSet_Tools.h>
#include <SketchPlugin_Feature.h>
+#include <SketchPlugin_ConstraintRigid.h>
+
+#include <XGUI_Workshop.h>
-bool PartSet_WidgetShapeSelector::storeValueCustom() const
+PartSet_WidgetShapeSelector::PartSet_WidgetShapeSelector(QWidget* theParent,
+ ModuleBase_IWorkshop* theWorkshop,
+ const Config_WidgetAPI* theData,
+ const std::string& theParentId)
+: ModuleBase_WidgetShapeSelector(theParent, theWorkshop, theData, theParentId)
{
- if (!mySelectedObject)
- return false;
+}
- FeaturePtr aSelectedFeature = ModelAPI_Feature::feature(mySelectedObject);
+bool PartSet_WidgetShapeSelector::setObject(ObjectPtr theSelectedObject, GeomShapePtr theShape)
+{
+ ObjectPtr aSelectedObject = theSelectedObject;
+ GeomShapePtr aShape = theShape;
+
+ FeaturePtr aSelectedFeature = ModelAPI_Feature::feature(aSelectedObject);
if (aSelectedFeature == myFeature) // In order to avoid selection of the same object
return false;
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aSelectedFeature);
- if ((!aSPFeature) && (!myShape->isNull())) {
+ if (aSPFeature.get() == NULL && aShape.get() != NULL && !aShape->isNull()) {
// Processing of external (non-sketch) object
- ObjectPtr aObj = PartSet_Tools::createFixedObjectByExternal(myShape->impl<TopoDS_Shape>(),
- mySelectedObject, mySketch);
- if (aObj) {
- PartSet_WidgetShapeSelector* that = (PartSet_WidgetShapeSelector*) this;
- that->mySelectedObject = aObj;
- } else
+ createExternal(theSelectedObject, theShape);
+ if (myExternalObject)
+ aSelectedObject = myExternalObject;
+ else
return false;
} else {
// Processing of sketch object
DataPtr aData = myFeature->data();
- if (myShape) {
+ if (aShape) {
AttributePtr aAttr = aData->attribute(attributeID());
AttributeRefAttrPtr aRefAttr =
std::dynamic_pointer_cast<ModelAPI_AttributeRefAttr>(aAttr);
if (aRefAttr) {
- TopoDS_Shape aShape = myShape->impl<TopoDS_Shape>();
- AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(mySelectedObject, aShape, mySketch);
+ // it is possible that the point feature is selected. It should be used itself
+ // instead of searching an attribute for the shape
+ bool aShapeIsResult = false;
+ /*ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theSelectedObject);
+ if (aResult.get() != NULL) {
+ GeomShapePtr aShapePtr = aResult->shape();
+ // it is important to call isEqual of the shape of result.
+ // It is a GeomAPI_Vertex shape for the point. The shape of the parameter is
+ // GeomAPI_Shape. It is important to use the realization of the isEqual method from
+ // GeomAPI_Vertex class
+ aShapeIsResult = aShapePtr.get() != NULL && aShapePtr->isEqual(theShape);
+ }*/
+ AttributePtr aPntAttr;
+ if (!aShapeIsResult) {
+ TopoDS_Shape aTDSShape = aShape->impl<TopoDS_Shape>();
+ aPntAttr = PartSet_Tools::findAttributeBy2dPoint(aSelectedObject, aTDSShape, mySketch);
+ }
// this is an alternative, whether the attribute should be set or object in the attribute
// the first check is the attribute because the object already exist
// the object is set only if there is no selected attribute
// test case is - preselection for distance operation, which contains two points selected on lines
if (aPntAttr)
aRefAttr->setAttr(aPntAttr);
- else if (mySelectedObject)
- aRefAttr->setObject(mySelectedObject);
- updateObject(myFeature);
+ else if (aSelectedObject)
+ aRefAttr->setObject(aSelectedObject);
return true;
}
}
}
- return ModuleBase_WidgetShapeSelector::storeValueCustom();
+ return ModuleBase_WidgetShapeSelector::setObject(aSelectedObject, aShape);
}
//********************************************************************
-bool PartSet_WidgetShapeSelector::isValid(ObjectPtr theObj, std::shared_ptr<GeomAPI_Shape> theShape)
+void PartSet_WidgetShapeSelector::restoreAttributeValue(const bool theValid)
{
- // the method is redefined to analize the selected shape in validators
- SessionPtr aMgr = ModelAPI_Session::get();
- ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
- std::list<ModelAPI_Validator*> aValidators;
- std::list<std::list<std::string> > anArguments;
- aFactory->validators(parentID(), attributeID(), aValidators, anArguments);
-
- // Check the type of selected object
- std::list<ModelAPI_Validator*>::iterator aValidator = aValidators.begin();
- bool isValid = true;
- for (; aValidator != aValidators.end(); aValidator++) {
- const ModelAPI_ResultValidator* aResValidator =
- dynamic_cast<const ModelAPI_ResultValidator*>(*aValidator);
- if (aResValidator) {
- isValid = false;
- if (aResValidator->isValid(theObj)) {
- isValid = true;
- break;
- }
- }
- }
- if (!isValid)
- return false;
+ ModuleBase_WidgetShapeSelector::restoreAttributeValue(theValid);
+ removeExternal();
+}
- // Check the acceptability of the object and shape as validator attribute
- AttributePtr aPntAttr;
- DataPtr aData = myFeature->data();
- if (theShape.get() != NULL) {
- AttributePtr aAttr = aData->attribute(attributeID());
- AttributeRefAttrPtr aRefAttr =
- std::dynamic_pointer_cast<ModelAPI_AttributeRefAttr>(aAttr);
- if (aRefAttr) {
- TopoDS_Shape aShape = theShape->impl<TopoDS_Shape>();
- aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theObj, aShape, mySketch);
- }
- }
- // Check the acceptability of the object as attribute
- aValidator = aValidators.begin();
- std::list<std::list<std::string> >::iterator aArgs = anArguments.begin();
- for (; aValidator != aValidators.end(); aValidator++, aArgs++) {
- const ModelAPI_RefAttrValidator* aAttrValidator =
- dynamic_cast<const ModelAPI_RefAttrValidator*>(*aValidator);
- if (aAttrValidator) {
- if (aPntAttr.get() != NULL)
- {
- if (!aAttrValidator->isValid(myFeature, *aArgs, aPntAttr)) {
- return false;
- }
- }
- else
- {
- if (!aAttrValidator->isValid(myFeature, *aArgs, theObj)) {
- return false;
- }
- }
- }
+//********************************************************************
+void PartSet_WidgetShapeSelector::createExternal(ObjectPtr theSelectedObject,
+ GeomShapePtr theShape)
+{
+ ObjectPtr aObj = PartSet_Tools::createFixedObjectByExternal(theShape->impl<TopoDS_Shape>(),
+ theSelectedObject, mySketch);
+ if (aObj != myExternalObject) {
+ removeExternal();
+ myExternalObject = aObj;
}
- return true;
}
-//*********************************************
-bool PartSet_WidgetConstraintShapeSelector::storeValueCustom() const
+//********************************************************************
+void PartSet_WidgetShapeSelector::removeExternal()
{
- FeaturePtr aFeature = ModelAPI_Feature::feature(mySelectedObject);
- if (aFeature) {
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if ((!aSPFeature) && (!myShape->isNull())) {
- ObjectPtr aObj = PartSet_Tools::createFixedObjectByExternal(myShape->impl<TopoDS_Shape>(),
- mySelectedObject, mySketch);
- if (aObj) {
- PartSet_WidgetConstraintShapeSelector* that = (PartSet_WidgetConstraintShapeSelector*) this;
- that->mySelectedObject = aObj;
- } else
- return false;
+ if (myExternalObject.get()) {
+ DocumentPtr aDoc = myExternalObject->document();
+ FeaturePtr aFeature = ModelAPI_Feature::feature(myExternalObject);
+ if (aFeature.get() != NULL) {
+ // 1. check whether the external object can be deleted
+ // It should not be deleted if there are references to the object from other features,
+ // which are not the sketch or a rigid constraints.
+ std::set<FeaturePtr> aRefFeatures;
+ aFeature->document()->refsToFeature(aFeature, aRefFeatures, false);
+ std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
+ aLast = aRefFeatures.end();
+ bool aReferenceExist = false;
+ CompositeFeaturePtr aSketch = sketch();
+ for (; anIt != aLast && !aReferenceExist; anIt++) {
+ FeaturePtr aFeature = (*anIt);
+ aReferenceExist = aFeature != aSketch &&
+ aFeature->getKind() != SketchPlugin_ConstraintRigid::ID();
+ }
+ if (aReferenceExist)
+ return;
+
+ // 2. delete external object
+ QObjectPtrList anObjects;
+ anObjects.append(aFeature);
+ // the external feature should be removed with all references, sketch feature should be ignored
+ std::set<FeaturePtr> anIgnoredFeatures;
+ anIgnoredFeatures.insert(sketch());
+ XGUI_Workshop::deleteFeatures(anObjects, anIgnoredFeatures);
}
+ myExternalObject = ObjectPtr();
}
- return ModuleBase_WidgetShapeSelector::storeValueCustom();
}