#include "PartSet_WidgetPoint2d.h"
#include <PartSet_Tools.h>
#include <PartSet_Module.h>
-#include <PartSet_LockApplyMgr.h>
#include <ModuleBase_ParamSpinBox.h>
#include <ModuleBase_Tools.h>
static QStringList MyFeaturesForCoincedence;
-//#define APPLY_BY_ENTER_OR_TAB
-
PartSet_WidgetPoint2D::PartSet_WidgetPoint2D(QWidget* theParent,
ModuleBase_IWorkshop* theWorkshop,
const Config_WidgetAPI* theData,
<< SketchPlugin_Point::ID().c_str()
<< SketchPlugin_Circle::ID().c_str();
}
- myLockApplyMgr = new PartSet_LockApplyMgr(theParent, myWorkshop);
- // the control should accept the focus, so the boolen flag is corrected to be true
+ // the control should accept the focus, so the boolean flag is corrected to be true
myIsObligatory = true;
//myOptionParam = theData->getProperty(PREVIOUS_FEATURE_PARAM);
QString aPageName = QString::fromStdString(theData->getProperty(CONTAINER_PAGE_NAME));
myGroupBox = new QGroupBox(aPageName, theParent);
myGroupBox->setFlat(false);
+ bool aAcceptVariables = theData->getBooleanAttribute(DOUBLE_WDG_ACCEPT_EXPRESSIONS, true);
+
QGridLayout* aGroupLay = new QGridLayout(myGroupBox);
ModuleBase_Tools::adjustMargins(aGroupLay);
aGroupLay->setSpacing(2);
aGroupLay->addWidget(aLabel, 0, 0);
myXSpin = new ModuleBase_ParamSpinBox(myGroupBox);
+ myXSpin->setAcceptVariables(aAcceptVariables);
myXSpin->setMinimum(-DBL_MAX);
myXSpin->setMaximum(DBL_MAX);
myXSpin->setToolTip(tr("X"));
aGroupLay->addWidget(myXSpin, 0, 1);
-#ifdef APPLY_BY_ENTER_OR_TAB
- // Apply widget value change by enter/tab event.
- connect(myXSpin, SIGNAL(editingFinished()), this, SLOT(onValuesChanged()));
-#else
- connect(myXSpin, SIGNAL(valueChanged(const QString&)), this, SLOT(onValuesChanged()));
-#endif
+ connect(myXSpin, SIGNAL(valueChanged(const QString&)), this, SIGNAL(valuesModified()));
}
{
QLabel* aLabel = new QLabel(myGroupBox);
aGroupLay->addWidget(aLabel, 1, 0);
myYSpin = new ModuleBase_ParamSpinBox(myGroupBox);
+ myYSpin->setAcceptVariables(aAcceptVariables);
myYSpin->setMinimum(-DBL_MAX);
myYSpin->setMaximum(DBL_MAX);
myYSpin->setToolTip(tr("Y"));
aGroupLay->addWidget(myYSpin, 1, 1);
-#ifdef APPLY_BY_ENTER_OR_TAB
- // Apply widget value change by enter/tab event.
- connect(myYSpin, SIGNAL(editingFinished()), this, SLOT(onValuesChanged()));
-#else
- connect(myYSpin, SIGNAL(valueChanged(const QString&)), this, SLOT(onValuesChanged()));
-#endif
+ connect(myYSpin, SIGNAL(valueChanged(const QString&)), this, SIGNAL(valuesModified()));
}
QVBoxLayout* aLayout = new QVBoxLayout(this);
ModuleBase_Tools::zeroMargins(aLayout);
setLayout(aLayout);
}
-bool PartSet_WidgetPoint2D::reset()
+bool PartSet_WidgetPoint2D::resetCustom()
{
bool aDone = false;
if (!isUseReset() || isComputedDefault() || myXSpin->hasVariable() || myYSpin->hasVariable()) {
bool PartSet_WidgetPoint2D::setSelection(QList<ModuleBase_ViewerPrs>& theValues,
const bool theToValidate)
{
+ bool isDone = false;
if (theValues.empty())
- return false;
+ return isDone;
ModuleBase_ViewerPrs aValue = theValues.takeFirst();
-
- Handle(V3d_View) aView = myWorkshop->viewer()->activeView();
- bool isDone = false;
TopoDS_Shape aShape = aValue.shape();
- double aX, aY;
- if (getPoint2d(aView, aShape, aX, aY)) {
- isDone = setPoint(aX, aY);
+ if (!aShape.IsNull()) {
+ Handle(V3d_View) aView = myWorkshop->viewer()->activeView();
+ double aX, aY;
+ if (getPoint2d(aView, aShape, aX, aY)) {
+ isDone = setPoint(aX, aY);
+ PartSet_Tools::setConstraints(mySketch, feature(), attributeID(), aX, aY);
+ }
+ }
+ else if (canBeActivatedByMove()) {
+ if (feature()->getKind() == SketchPlugin_Line::ID()) {
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aValue.object());
+ // Initialize new line with first point equal to end of previous
+ if (aFeature.get()) {
+ std::shared_ptr<ModelAPI_Data> aData = aFeature->data();
+ std::shared_ptr<GeomDataAPI_Point2D> aPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ aData->attribute(SketchPlugin_Line::END_ID()));
+ if (aPoint) {
+ setPoint(aPoint->x(), aPoint->y());
+ PartSet_Tools::setConstraints(mySketch, feature(), attributeID(), aPoint->x(),
+ aPoint->y());
+ isDone = true;
+ }
+ }
+ }
}
return isDone;
}
+void PartSet_WidgetPoint2D::selectContent()
+{
+ myXSpin->selectAll();
+}
+
bool PartSet_WidgetPoint2D::setPoint(double theX, double theY)
{
if (fabs(theX) >= MaxCoordinate)
aModes << TopAbs_VERTEX;
aModes << TopAbs_EDGE;
myWorkshop->activateSubShapesSelection(aModes);
+}
- myLockApplyMgr->activate();
+bool PartSet_WidgetPoint2D::canBeActivatedByMove()
+{
+ bool aCanBeActivated = false;
+ if (feature()->getKind() == SketchPlugin_Line::ID() &&
+ attributeID() == SketchPlugin_Line::START_ID())
+ aCanBeActivated = true;
+
+ return aCanBeActivated;
}
void PartSet_WidgetPoint2D::deactivate()
{
+ // the value of the control should be stored to model if it was not
+ // initialized yet. It is important when we leave this control by Tab key.
+ // It should not be performed by the widget activation as the preview
+ // is visualized with default value. Line point is moved to origin.
+ AttributePtr anAttribute = myFeature->data()->attribute(attributeID());
+ if (anAttribute && !anAttribute->isInitialized())
+ storeValue();
+
+ ModuleBase_ModelWidget::deactivate();
ModuleBase_IViewer* aViewer = myWorkshop->viewer();
disconnect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),
this, SLOT(onMouseMove(ModuleBase_IViewWindow*, QMouseEvent*)));
this, SLOT(onMouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)));
myWorkshop->deactivateSubShapesSelection();
-
- myLockApplyMgr->deactivate();
}
bool PartSet_WidgetPoint2D::getPoint2d(const Handle(V3d_View)& theView,
ObjectPtr aObject = aObjects.front();
FeaturePtr aSelectedFeature = ModelAPI_Feature::feature(aObject);
bool anExternal = false;
- if (aSelectedFeature.get() != NULL) {
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aSelectedFeature);
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature;
+ if (aSelectedFeature.get() != NULL)
+ aSPFeature = std::dynamic_pointer_cast<SketchPlugin_Feature>(aSelectedFeature);
if ((!aSPFeature) && (!aShape.IsNull())) {
anExternal = true;
ResultPtr aFixedObject = PartSet_Tools::findFixedObjectByExternal(aShape, aObject, mySketch);
else {
if (getPoint2d(aView, aShape, aX, aY))
setPoint(aX, aY);
+ else
+ setValueState(Stored); // in case of edge selection, Apply state should also be updated
+ bool anOrphanPoint = aShape.ShapeType() == TopAbs_VERTEX ||
+ isOrphanPoint(aSelectedFeature, mySketch, aX, aY);
setConstraintWith(aObject);
- emit vertexSelected();
+ // fignal updated should be flushed in order to visualize possible created external objects
+ // e.g. selection of trihedron axis when input end arc point
+ updateObject(feature());
+ if (!anOrphanPoint && !anExternal)
+ emit vertexSelected();
+
emit focusOutWidget(this);
}
}
- }
if (!anExternal) {
double aX, aY;
bool isProcessed = false;
setPoint(aX, aY);
}
else {
+ bool anOrphanPoint = isOrphanPoint(aSelectedFeature, mySketch, aX, aY);
// do not set a coincidence constraint in the attribute if the feature contains a point
// with the same coordinates. It is important for line creation in order to do not set
// the same constraints for the same points, oterwise the result line has zero length.
PartSet_Tools::setConstraints(mySketch, feature(), attributeID(), aX, aY);
}
else if (aShape.ShapeType() == TopAbs_EDGE) {
- if (MyFeaturesForCoincedence.contains(myFeature->getKind().c_str()))
+ if (MyFeaturesForCoincedence.contains(myFeature->getKind().c_str())) {
setConstraintWith(aObject);
+ setValueState(Stored); // in case of edge selection, Apply state should also be updated
+ }
}
// it is important to perform updateObject() in order to the current value is
// processed by Sketch Solver. Test case: line is created from a previous point
// points of the line becomes less than the tolerance. Validator of the line returns
// false, the line will be aborted, but sketch stays valid.
updateObject(feature());
- emit vertexSelected();
+ if (!anOrphanPoint && !anExternal)
+ emit vertexSelected();
emit focusOutWidget(this);
}
}
double aX, anY;
PartSet_Tools::convertTo2D(aPoint, mySketch, theWnd->v3dView(), aX, anY);
+ // we need to block the value state change
+ bool isBlocked = blockValueState(true);
setPoint(aX, anY);
+ blockValueState(isBlocked);
+ setValueState(ModifiedInViewer);
}
double PartSet_WidgetPoint2D::x() const
double theX, double theY)
{
bool aPointIsFound = false;
+
+ if (feature()->getKind() != SketchPlugin_Line::ID())
+ return aPointIsFound;
+
AttributePtr aWidgetAttribute = myFeature->attribute(attributeID());
std::shared_ptr<GeomAPI_Pnt2d> aPnt2d =
return aPointIsFound;
}
-void PartSet_WidgetPoint2D::onValuesChanged()
+void PartSet_WidgetPoint2D::initializeValueByActivate()
+{
+}
+
+/*void PartSet_WidgetPoint2D::onValuesChanged()
{
- myLockApplyMgr->valuesChanged();
emit valuesChanged();
+}*/
+
+bool PartSet_WidgetPoint2D::processEnter()
+{
+ bool isModified = getValueState() == ModifiedInPP;
+ if (isModified) {
+ bool isXModified = myXSpin->hasFocus();
+ emit valuesChanged();
+ if (isXModified)
+ myXSpin->selectAll();
+ else
+ myYSpin->selectAll();
+ }
+ return isModified;
+}
+
+bool PartSet_WidgetPoint2D::isOrphanPoint(const FeaturePtr& theFeature,
+ const CompositeFeaturePtr& theSketch,
+ double theX, double theY)
+{
+ bool anOrphanPoint = false;
+ if (theFeature.get()) {
+ std::shared_ptr<GeomDataAPI_Point2D> aPointAttr;
+ std::string aFeatureKind = theFeature->getKind();
+ if (aFeatureKind == SketchPlugin_Point::ID())
+ aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Point::COORD_ID()));
+ else if (aFeatureKind == SketchPlugin_Circle::ID())
+ aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Circle::CENTER_ID()));
+
+ else if (aFeatureKind == SketchPlugin_Arc::ID())
+ aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Arc::CENTER_ID()));
+
+ /// check that the geometry point with the given coordinates is the checked point
+ /// e.g. in arc the (x,y) point can not coicide to the center point and it automatically
+ /// means that this point is not an orphant one.
+ if (aPointAttr.get()) {
+ std::shared_ptr<GeomAPI_Pnt2d> aCheckedPoint = std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(theX, theY));
+ if (!aCheckedPoint->isEqual(aPointAttr->pnt()))
+ return anOrphanPoint;
+ }
+
+ if (aPointAttr.get()) {
+ std::shared_ptr<GeomAPI_Pnt2d> aPoint = aPointAttr->pnt();
+ FeaturePtr aCoincidence = PartSet_Tools::findFirstCoincidence(theFeature, aPoint);
+ anOrphanPoint = true;
+ // if there is at least one concident line to the point, the point is not an orphant
+ if (aCoincidence.get()) {
+ QList<FeaturePtr> aCoinsideLines;
+ PartSet_Tools::findCoincidences(aCoincidence, aCoinsideLines,
+ SketchPlugin_ConstraintCoincidence::ENTITY_A());
+ PartSet_Tools::findCoincidences(aCoincidence, aCoinsideLines,
+ SketchPlugin_ConstraintCoincidence::ENTITY_B());
+ QList<FeaturePtr>::const_iterator anIt = aCoinsideLines.begin(),
+ aLast = aCoinsideLines.end();
+ for (; anIt != aLast && anOrphanPoint; anIt++) {
+ anOrphanPoint = (*anIt)->getKind() != SketchPlugin_Line::ID();
+ }
+ }
+ }
+ }
+ return anOrphanPoint;
}
