+// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
+
// File: PartSet_Tools.h
// Created: 28 Apr 2014
// Author: Natalia ERMOLAEVA
#include <PartSet_Tools.h>
+#include <PartSet_Module.h>
+#include <PartSet_SketcherMgr.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_AttributeDouble.h>
#include <ModelAPI_Session.h>
#include <ModelAPI_ResultConstruction.h>
+#include <XGUI_ModuleConnector.h>
+#include <XGUI_Displayer.h>
+#include <XGUI_Workshop.h>
+#include <XGUI_SelectionMgr.h>
+#include <XGUI_Selection.h>
+
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomAPI_Pnt2d.h>
#include <GeomAPI_Pnt.h>
#include <GeomAPI_Edge.h>
+#include <GeomAPI_Vertex.h>
#include <GeomAPI_Dir.h>
#include <GeomAPI_XYZ.h>
#include <SketchPlugin_Circle.h>
#include <SketchPlugin_Arc.h>
#include <SketchPlugin_Line.h>
+#include <SketchPlugin_Point.h>
+#include <ModuleBase_IWorkshop.h>
#include <ModuleBase_ViewerPrs.h>
#include <V3d_View.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Edge.hxx>
#include <TopoDS_Vertex.hxx>
+#include <AIS_InteractiveObject.hxx>
+#include <StdSelect_BRepOwner.hxx>
+#include <SelectMgr_IndexedMapOfOwner.hxx>
#ifdef _DEBUG
#include <QDebug>
return;
AttributeDoublePtr anAttr;
- boost::shared_ptr<ModelAPI_Data> aData = theSketch->data();
+ std::shared_ptr<ModelAPI_Data> aData = theSketch->data();
- boost::shared_ptr<GeomDataAPI_Point> anOrigin = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
+ std::shared_ptr<GeomDataAPI_Point> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aX = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> anY = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- aData->attribute(SketchPlugin_Sketch::DIRY_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomAPI_XYZ> anY = aNorm->xyz()->cross(aX->xyz());
gp_Pnt anOriginPnt(anOrigin->x(), anOrigin->y(), anOrigin->z());
gp_Vec aVec(anOriginPnt, thePoint);
gp_Vec anEyeVec(EyePoint, AtPoint);
anEyeVec.Normalize();
- boost::shared_ptr<GeomDataAPI_Dir> aNormal = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ std::shared_ptr<GeomDataAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::NORM_ID()));
gp_Vec aNormalVec(aNormal->x(), aNormal->y(), aNormal->z());
theY = aVec.X() * anY->x() + aVec.Y() * anY->y() + aVec.Z() * anY->z();
}
-void PartSet_Tools::convertTo3D(const double theX, const double theY, FeaturePtr theSketch,
- gp_Pnt& thePoint)
+std::shared_ptr<GeomAPI_Pnt2d> PartSet_Tools::convertTo2D(FeaturePtr theSketch,
+ const std::shared_ptr<GeomAPI_Pnt>& thePnt)
{
- if (!theSketch)
- return;
+ std::shared_ptr<GeomAPI_Pnt2d> aRes;
+ if (theSketch->getKind() != SketchPlugin_Sketch::ID())
+ return aRes;
+ std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
+ theSketch->data()->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ theSketch->data()->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ theSketch->data()->attribute(SketchPlugin_Sketch::DIRX_ID()));
+ std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
+ return thePnt->to2D(aC->pnt(), aX->dir(), aY);
+}
- boost::shared_ptr<ModelAPI_Data> aData = theSketch->data();
- boost::shared_ptr<GeomDataAPI_Point> aC = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
+std::shared_ptr<GeomAPI_Pnt> PartSet_Tools::convertTo3D(const double theX, const double theY, FeaturePtr theSketch)
+{
+ std::shared_ptr<ModelAPI_Data> aData = theSketch->data();
+
+ std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aX = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aY = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- aData->attribute(SketchPlugin_Sketch::DIRY_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
- boost::shared_ptr<GeomAPI_XYZ> aSum = aC->pnt()->xyz()->added(aX->dir()->xyz()->multiplied(theX))
- ->added(aY->dir()->xyz()->multiplied(theY));
+ std::shared_ptr<GeomAPI_Pnt2d> aPnt2d =
+ std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(theX, theY));
- boost::shared_ptr<GeomAPI_Pnt> aPoint = boost::shared_ptr<GeomAPI_Pnt>(new GeomAPI_Pnt(aSum));
- thePoint = gp_Pnt(aPoint->x(), aPoint->y(), aPoint->z());
+ return aPnt2d->to3D(aC->pnt(), aX->dir(), aY);
}
ObjectPtr PartSet_Tools::nearestFeature(QPoint thePoint, Handle_V3d_View theView,
ObjectPtr aDeltaObject;
CompositeFeaturePtr aSketch =
- boost::dynamic_pointer_cast<ModelAPI_CompositeFeature>(theSketch);
+ std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(theSketch);
// 1. find it in the selected list by the selected point
if (!aDeltaObject) {
double aX, anY;
if (!aPrs.object())
continue;
FeaturePtr aFeature = ModelAPI_Feature::feature(aPrs.object());
- boost::shared_ptr<SketchPlugin_Feature> aSketchFeature = boost::dynamic_pointer_cast<
+ std::shared_ptr<SketchPlugin_Feature> aSketchFeature = std::dynamic_pointer_cast<
SketchPlugin_Feature>(aFeature);
if (!aSketchFeature || !aSketch->isSub(aSketchFeature))
continue;
double aDelta = aSketchFeature->distanceToPoint(
- boost::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(aX, anY)));
+ std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(aX, anY)));
if (aMinDelta < 0 || aMinDelta > aDelta) {
aMinDelta = aDelta;
// TODO aDeltaObject = aPrs.result();
return aDeltaObject;
}
-boost::shared_ptr<ModelAPI_Document> PartSet_Tools::document()
+std::shared_ptr<ModelAPI_Document> PartSet_Tools::document()
{
return ModelAPI_Session::get()->moduleDocument();
}
-boost::shared_ptr<GeomDataAPI_Point2D> PartSet_Tools::getFeaturePoint(FeaturePtr theFeature,
+/*std::shared_ptr<GeomDataAPI_Point2D> PartSet_Tools::getFeaturePoint(FeaturePtr theFeature,
double theX, double theY)
{
- boost::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = boost::shared_ptr<GeomAPI_Pnt2d>(
+ std::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = std::shared_ptr<GeomAPI_Pnt2d>(
new GeomAPI_Pnt2d(theX, theY));
- std::list<boost::shared_ptr<ModelAPI_Attribute> > anAttiributes =
- theFeature->data()->attributes(GeomDataAPI_Point2D::type());
- std::list<boost::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt = anAttiributes.begin(),
+ std::list<std::shared_ptr<ModelAPI_Attribute> > anAttiributes =
+ theFeature->data()->attributes(GeomDataAPI_Point2D::typeId());
+ std::list<std::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt = anAttiributes.begin(),
aLast = anAttiributes.end();
- boost::shared_ptr<GeomDataAPI_Point2D> aFPoint;
+ std::shared_ptr<GeomDataAPI_Point2D> aFPoint;
for (; anIt != aLast && !aFPoint; anIt++) {
- boost::shared_ptr<GeomDataAPI_Point2D> aCurPoint = boost::dynamic_pointer_cast<
+ std::shared_ptr<GeomDataAPI_Point2D> aCurPoint = std::dynamic_pointer_cast<
GeomDataAPI_Point2D>(*anIt);
if (aCurPoint && aCurPoint->pnt()->distance(aClickedPoint) < Precision::Confusion())
aFPoint = aCurPoint;
}
return aFPoint;
-}
+}*/
void PartSet_Tools::setFeatureValue(FeaturePtr theFeature, double theValue,
const std::string& theAttribute)
{
if (!theFeature)
return;
- boost::shared_ptr<ModelAPI_Data> aData = theFeature->data();
- AttributeDoublePtr anAttribute = boost::dynamic_pointer_cast<ModelAPI_AttributeDouble>(
+ std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
+ AttributeDoublePtr anAttribute = std::dynamic_pointer_cast<ModelAPI_AttributeDouble>(
aData->attribute(theAttribute));
if (anAttribute)
anAttribute->setValue(theValue);
isValid = false;
double aValue = 0;
if (theFeature) {
- boost::shared_ptr<ModelAPI_Data> aData = theFeature->data();
- AttributeDoublePtr anAttribute = boost::dynamic_pointer_cast<ModelAPI_AttributeDouble>(
+ std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
+ AttributeDoublePtr anAttribute = std::dynamic_pointer_cast<ModelAPI_AttributeDouble>(
aData->attribute(theAttribute));
if (anAttribute) {
aValue = anAttribute->value();
if (!theFeature)
return aFeature;
- boost::shared_ptr<ModelAPI_Data> aData = theFeature->data();
- boost::shared_ptr<ModelAPI_AttributeRefAttr> anAttr = boost::dynamic_pointer_cast<
+ std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
+ std::shared_ptr<ModelAPI_AttributeRefAttr> anAttr = std::dynamic_pointer_cast<
ModelAPI_AttributeRefAttr>(aData->attribute(theAttribute));
if (anAttr) {
- aFeature = boost::dynamic_pointer_cast<ModelAPI_Feature>(anAttr->object());
+ aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anAttr->object());
if (!theKind.empty() && aFeature && aFeature->getKind() != theKind) {
aFeature = FeaturePtr();
}
}
void PartSet_Tools::createConstraint(CompositeFeaturePtr theSketch,
- boost::shared_ptr<GeomDataAPI_Point2D> thePoint1,
- boost::shared_ptr<GeomDataAPI_Point2D> thePoint2)
+ std::shared_ptr<GeomDataAPI_Point2D> thePoint1,
+ std::shared_ptr<GeomDataAPI_Point2D> thePoint2)
{
FeaturePtr aFeature;
if (theSketch) {
aFeature = theSketch->addFeature(SketchPlugin_ConstraintCoincidence::ID());
} else {
- boost::shared_ptr<ModelAPI_Document> aDoc = document();
+ std::shared_ptr<ModelAPI_Document> aDoc = document();
aFeature = aDoc->addFeature(SketchPlugin_ConstraintCoincidence::ID());
}
- boost::shared_ptr<ModelAPI_Data> aData = aFeature->data();
+ std::shared_ptr<ModelAPI_Data> aData = aFeature->data();
- boost::shared_ptr<ModelAPI_AttributeRefAttr> aRef1 = boost::dynamic_pointer_cast<
+ std::shared_ptr<ModelAPI_AttributeRefAttr> aRef1 = std::dynamic_pointer_cast<
ModelAPI_AttributeRefAttr>(aData->attribute(SketchPlugin_Constraint::ENTITY_A()));
aRef1->setAttr(thePoint1);
- boost::shared_ptr<ModelAPI_AttributeRefAttr> aRef2 = boost::dynamic_pointer_cast<
+ std::shared_ptr<ModelAPI_AttributeRefAttr> aRef2 = std::dynamic_pointer_cast<
ModelAPI_AttributeRefAttr>(aData->attribute(SketchPlugin_Constraint::ENTITY_B()));
aRef2->setAttr(thePoint2);
aFeature->execute();
}
+/*std::shared_ptr<GeomDataAPI_Point2D> PartSet_Tools::
+ findAttributePoint(CompositeFeaturePtr theSketch, double theX, double theY,
+ double theTolerance, const QList<FeaturePtr>& theIgnore)
+{
+ std::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(theX, theY));
+
+ std::list<std::shared_ptr<ModelAPI_Attribute> > anAttiributes;
+ for (int i = 0; i < theSketch->numberOfSubs(); i++) {
+ FeaturePtr aFeature = theSketch->subFeature(i);
+ if (!theIgnore.contains(aFeature)) {
+ anAttiributes = aFeature->data()->attributes(GeomDataAPI_Point2D::typeId());
+
+ std::list<std::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt;
+ for (anIt = anAttiributes.cbegin(); anIt != anAttiributes.cend(); ++anIt) {
+ std::shared_ptr<GeomDataAPI_Point2D> aCurPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(*anIt);
+ double x = aCurPoint->x();
+ double y = aCurPoint->y();
+ if (aCurPoint && (aCurPoint->pnt()->distance(aClickedPoint) < theTolerance)) {
+ return aCurPoint;
+ }
+ }
+ }
+ }
+ return std::shared_ptr<GeomDataAPI_Point2D>();
+}*/
+
+
void PartSet_Tools::setConstraints(CompositeFeaturePtr theSketch, FeaturePtr theFeature,
const std::string& theAttribute, double theClickedX,
double theClickedY)
{
// find a feature point by the selection mode
- //boost::shared_ptr<GeomDataAPI_Point2D> aPoint = featurePoint(theMode);
- boost::shared_ptr<GeomDataAPI_Point2D> aFeaturePoint = boost::dynamic_pointer_cast<
+ //std::shared_ptr<GeomDataAPI_Point2D> aPoint = featurePoint(theMode);
+ std::shared_ptr<GeomDataAPI_Point2D> aFeaturePoint = std::dynamic_pointer_cast<
GeomDataAPI_Point2D>(theFeature->data()->attribute(theAttribute));
if (!aFeaturePoint)
return;
// get all sketch features. If the point with the given coordinates belong to any sketch feature,
// the constraint is created between the feature point and the found sketch point
- boost::shared_ptr<ModelAPI_Data> aData = theSketch->data();
- boost::shared_ptr<ModelAPI_AttributeRefList> aRefList = boost::dynamic_pointer_cast<
+ std::shared_ptr<ModelAPI_Data> aData = theSketch->data();
+ std::shared_ptr<ModelAPI_AttributeRefList> aRefList = std::dynamic_pointer_cast<
ModelAPI_AttributeRefList>(aData->attribute(SketchPlugin_Sketch::FEATURES_ID()));
std::list<ObjectPtr> aFeatures = aRefList->list();
std::list<ObjectPtr>::const_iterator anIt = aFeatures.begin(), aLast = aFeatures.end();
- std::list<boost::shared_ptr<ModelAPI_Attribute> > anAttiributes;
- boost::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = boost::shared_ptr<GeomAPI_Pnt2d>(
+ std::list<std::shared_ptr<ModelAPI_Attribute> > anAttiributes;
+ std::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = std::shared_ptr<GeomAPI_Pnt2d>(
new GeomAPI_Pnt2d(theClickedX, theClickedY));
for (; anIt != aLast; anIt++) {
- FeaturePtr aFeature = boost::dynamic_pointer_cast<ModelAPI_Feature>(*anIt);
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(*anIt);
+ if (theFeature == aFeature)
+ continue;
// find the given point in the feature attributes
- anAttiributes = aFeature->data()->attributes(GeomDataAPI_Point2D::type());
- std::list<boost::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt = anAttiributes.begin(),
+ anAttiributes = aFeature->data()->attributes(GeomDataAPI_Point2D::typeId());
+ std::list<std::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt = anAttiributes.begin(),
aLast = anAttiributes.end();
- boost::shared_ptr<GeomDataAPI_Point2D> aFPoint;
+ std::shared_ptr<GeomDataAPI_Point2D> aFPoint;
for (; anIt != aLast && !aFPoint; anIt++) {
- boost::shared_ptr<GeomDataAPI_Point2D> aCurPoint = boost::dynamic_pointer_cast<
- GeomDataAPI_Point2D>(*anIt);
- if (aCurPoint && aCurPoint->pnt()->distance(aClickedPoint) < Precision::Confusion())
+ std::shared_ptr<GeomDataAPI_Point2D> aCurPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(*anIt);
+ if (aCurPoint && (aCurPoint->pnt()->distance(aClickedPoint) < Precision::Confusion())) {
aFPoint = aCurPoint;
+ break;
+ }
}
if (aFPoint)
PartSet_Tools::createConstraint(theSketch, aFPoint, aFeaturePoint);
}
}
-boost::shared_ptr<GeomAPI_Pln> PartSet_Tools::sketchPlane(CompositeFeaturePtr theSketch)
+std::shared_ptr<GeomAPI_Pln> PartSet_Tools::sketchPlane(CompositeFeaturePtr theSketch)
{
- boost::shared_ptr<GeomAPI_Pln> aPlane;
- double aA, aB, aC, aD;
-
- boost::shared_ptr<ModelAPI_Data> aData = theSketch->data();
- boost::shared_ptr<GeomDataAPI_Point> anOrigin = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
- aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aNormal = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- aData->attribute(SketchPlugin_Sketch::NORM_ID()));
- aA = aNormal->x();
- aB = aNormal->y();
- aC = aNormal->z();
- aD = 0;
+ std::shared_ptr<GeomAPI_Pln> aPlane;
- aPlane = boost::shared_ptr<GeomAPI_Pln>(new GeomAPI_Pln(aA, aB, aC, aD));
+ std::shared_ptr<ModelAPI_Data> aData = theSketch->data();
+ if (aData) {
+ std::shared_ptr<GeomDataAPI_Point> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
+ aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ if (aNormal && anOrigin) {
+ double adX = aNormal->x();
+ double adY = aNormal->y();
+ double adZ = aNormal->z();
+
+ if ( (adX != 0) || (adY != 0) || (adZ != 0) ) { // Plane is valid
+ double aX = anOrigin->x();
+ double aY = anOrigin->y();
+ double aZ = anOrigin->z();
+ gp_Pln aPln(gp_Pnt(aX, aY, aZ), gp_Dir(adX, adY, adZ));
+ double aA, aB, aC, aD;
+ aPln.Coefficients(aA, aB, aC, aD);
+ aPlane = std::shared_ptr<GeomAPI_Pln>(new GeomAPI_Pln(aA, aB, aC, aD));
+ }
+ }
+ }
return aPlane;
}
-boost::shared_ptr<GeomAPI_Pnt> PartSet_Tools::point3D(boost::shared_ptr<GeomAPI_Pnt2d> thePoint2D,
+std::shared_ptr<GeomAPI_Pnt> PartSet_Tools::point3D(std::shared_ptr<GeomAPI_Pnt2d> thePoint2D,
CompositeFeaturePtr theSketch)
{
- boost::shared_ptr<GeomAPI_Pnt> aPoint;
+ std::shared_ptr<GeomAPI_Pnt> aPoint;
if (!theSketch || !thePoint2D)
return aPoint;
- boost::shared_ptr<GeomDataAPI_Point> aC = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
- theSketch->data()->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aX = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- theSketch->data()->attribute(SketchPlugin_Sketch::DIRX_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aY = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- theSketch->data()->attribute(SketchPlugin_Sketch::DIRY_ID()));
+ DataPtr aData = theSketch->data();
+ std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
+ aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
- return thePoint2D->to3D(aC->pnt(), aX->dir(), aY->dir());
+ return thePoint2D->to3D(aC->pnt(), aX->dir(), aY);
}
-bool PartSet_Tools::isConstraintFeature(const std::string& theKind)
+ResultPtr PartSet_Tools::findFixedObjectByExternal(const TopoDS_Shape& theShape,
+ const ObjectPtr& theObject,
+ CompositeFeaturePtr theSketch)
{
- return theKind == SketchPlugin_ConstraintDistance::ID()
- || theKind == SketchPlugin_ConstraintLength::ID()
- || theKind == SketchPlugin_ConstraintRadius::ID()
- || theKind == SketchPlugin_ConstraintRigid::ID();
+ ResultPtr aResult;
+ if (theShape.ShapeType() == TopAbs_EDGE) {
+ // Check that we already have such external edge
+ std::shared_ptr<GeomAPI_Edge> aInEdge = std::shared_ptr<GeomAPI_Edge>(new GeomAPI_Edge());
+ aInEdge->setImpl(new TopoDS_Shape(theShape));
+ aResult = findExternalEdge(theSketch, aInEdge);
+ }
+ if (theShape.ShapeType() == TopAbs_VERTEX) {
+ std::shared_ptr<GeomAPI_Vertex> aInVert = std::shared_ptr<GeomAPI_Vertex>(new GeomAPI_Vertex());
+ aInVert->setImpl(new TopoDS_Shape(theShape));
+ aResult = findExternalVertex(theSketch, aInVert);
+ }
+ return aResult;
}
-ResultPtr PartSet_Tools::createFixedObjectByEdge(const ModuleBase_ViewerPrs& thePrs, CompositeFeaturePtr theSketch)
+ResultPtr PartSet_Tools::createFixedObjectByExternal(const TopoDS_Shape& theShape,
+ const ObjectPtr& theObject,
+ CompositeFeaturePtr theSketch)
{
- TopoDS_Shape aShape = thePrs.shape();
- if (aShape.ShapeType() != TopAbs_EDGE)
- return ResultPtr();
-
- // Check that we already have such external edge
- boost::shared_ptr<GeomAPI_Edge> aInEdge = boost::shared_ptr<GeomAPI_Edge>(new GeomAPI_Edge());
- aInEdge->setImpl(new TopoDS_Shape(aShape));
- ResultPtr aResult = findExternalEdge(theSketch, aInEdge);
- if (aResult)
- return aResult;
-
- // If not found then we have to create new
- Standard_Real aStart, aEnd;
- Handle(V3d_View) aNullView;
- FeaturePtr aMyFeature;
-
- Handle(Geom_Curve) aCurve = BRep_Tool::Curve(TopoDS::Edge(aShape), aStart, aEnd);
- GeomAdaptor_Curve aAdaptor(aCurve);
- if (aAdaptor.GetType() == GeomAbs_Line) {
- // Create line
- aMyFeature = theSketch->addFeature(SketchPlugin_Line::ID());
-
- //DataPtr aData = myFeature->data();
- //boost::shared_ptr<GeomDataAPI_Point2D> anEndAttr =
- // boost::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
-
- //double aX, aY;
- //gp_Pnt Pnt1 = aAdaptor.Value(aStart);
- //convertTo2D(Pnt1, theSketch, aNullView, aX, aY);
- //setFeaturePoint(myFeature, aX, aY, SketchPlugin_Line::START_ID());
-
- //gp_Pnt Pnt2 = aAdaptor.Value(aEnd);
- //convertTo2D(Pnt2, theSketch, aNullView, aX, aY);
- //setFeaturePoint(myFeature, aX, aY, SketchPlugin_Line::END_ID());
- } else if (aAdaptor.GetType() == GeomAbs_Circle) {
- if (aAdaptor.IsClosed()) {
- // Create circle
- aMyFeature = theSketch->addFeature(SketchPlugin_Circle::ID());
- //gp_Circ aCirc = aAdaptor.Circle();
- //gp_Pnt aCenter = aCirc.Location();
-
- //double aX, aY;
- //convertTo2D(aCenter, theSketch, aNullView, aX, aY);
- //setFeaturePoint(myFeature, aX, aY, SketchPlugin_Circle::CENTER_ID());
- //setFeatureValue(myFeature, aCirc.Radius(), SketchPlugin_Circle::RADIUS_ID());
- } else {
- // Create arc
- aMyFeature = theSketch->addFeature(SketchPlugin_Arc::ID());
+ if (theShape.ShapeType() == TopAbs_EDGE) {
+ Standard_Real aStart, aEnd;
+ Handle(V3d_View) aNullView;
+ FeaturePtr aMyFeature;
+
+ Handle(Geom_Curve) aCurve = BRep_Tool::Curve(TopoDS::Edge(theShape), aStart, aEnd);
+ GeomAdaptor_Curve aAdaptor(aCurve);
+ if (aAdaptor.GetType() == GeomAbs_Line) {
+ // Create line
+ aMyFeature = theSketch->addFeature(SketchPlugin_Line::ID());
+ } else if (aAdaptor.GetType() == GeomAbs_Circle) {
+ std::shared_ptr<GeomAPI_Edge> anEdge = std::shared_ptr<GeomAPI_Edge>(new GeomAPI_Edge);
+ anEdge->setImpl(new TopoDS_Shape(theShape));
+ if (anEdge->isArc()) {
+ // Create arc
+ aMyFeature = theSketch->addFeature(SketchPlugin_Arc::ID());
+ }
+ else {
+ // Create circle
+ aMyFeature = theSketch->addFeature(SketchPlugin_Circle::ID());
+ }
+ }
+ if (aMyFeature) {
+ DataPtr aData = aMyFeature->data();
+ AttributeSelectionPtr anAttr =
+ std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+
+ ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
+ if (anAttr && aRes) {
+ std::shared_ptr<GeomAPI_Shape> anEdge(new GeomAPI_Shape);
+ anEdge->setImpl(new TopoDS_Shape(theShape));
+
+ anAttr->setValue(aRes, anEdge);
+
+ aMyFeature->execute();
+
+ // fix this edge
+ FeaturePtr aFix = theSketch->addFeature(SketchPlugin_ConstraintRigid::ID());
+ aFix->data()->refattr(SketchPlugin_Constraint::ENTITY_A())->
+ setObject(aMyFeature->lastResult());
+
+ return aMyFeature->lastResult();
+ }
}
}
- if (aMyFeature) {
- DataPtr aData = aMyFeature->data();
- AttributeSelectionPtr anAttr =
- boost::dynamic_pointer_cast<ModelAPI_AttributeSelection>
- (aData->attribute(SketchPlugin_Feature::EXTERNAL_ID()));
+ if (theShape.ShapeType() == TopAbs_VERTEX) {
+ FeaturePtr aMyFeature = theSketch->addFeature(SketchPlugin_Point::ID());
- ResultPtr aRes = boost::dynamic_pointer_cast<ModelAPI_Result>(thePrs.object());
- if (anAttr && aRes) {
- boost::shared_ptr<GeomAPI_Shape> anEdge(new GeomAPI_Shape);
- anEdge->setImpl(new TopoDS_Shape(aShape));
+ if (aMyFeature) {
+ DataPtr aData = aMyFeature->data();
+ AttributeSelectionPtr anAttr =
+ std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
- anAttr->setValue(aRes, anEdge);
+ ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
+ if (anAttr && aRes) {
+ std::shared_ptr<GeomAPI_Shape> aVert(new GeomAPI_Shape);
+ aVert->setImpl(new TopoDS_Shape(theShape));
- aMyFeature->execute();
+ anAttr->setValue(aRes, aVert);
+ aMyFeature->execute();
- // fix this edge
- FeaturePtr aFix = theSketch->addFeature(SketchPlugin_ConstraintRigid::ID());
- aFix->data()->refattr(SketchPlugin_Constraint::ENTITY_A())->
- setObject(aMyFeature->lastResult());
+ // fix this edge
+ FeaturePtr aFix = theSketch->addFeature(SketchPlugin_ConstraintRigid::ID());
+ aFix->data()->refattr(SketchPlugin_Constraint::ENTITY_A())->
+ setObject(aMyFeature->lastResult());
- return aMyFeature->lastResult();
+ return aMyFeature->lastResult();
+ }
}
}
return ResultPtr();
return false;
}
-ResultPtr PartSet_Tools::findExternalEdge(CompositeFeaturePtr theSketch, boost::shared_ptr<GeomAPI_Edge> theEdge)
+ResultPtr PartSet_Tools::findExternalEdge(CompositeFeaturePtr theSketch, std::shared_ptr<GeomAPI_Edge> theEdge)
{
for (int i = 0; i < theSketch->numberOfSubs(); i++) {
FeaturePtr aFeature = theSketch->subFeature(i);
- boost::shared_ptr<SketchPlugin_Feature> aSketchFea =
- boost::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ std::shared_ptr<SketchPlugin_Feature> aSketchFea =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSketchFea) {
if (aSketchFea->isExternal()) {
std::list<ResultPtr> aResults = aSketchFea->results();
std::list<ResultPtr>::const_iterator aIt;
for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
ResultConstructionPtr aRes =
- boost::dynamic_pointer_cast<ModelAPI_ResultConstruction>(*aIt);
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(*aIt);
if (aRes) {
- boost::shared_ptr<GeomAPI_Shape> aShape = aRes->shape();
+ std::shared_ptr<GeomAPI_Shape> aShape = aRes->shape();
if (aShape) {
if (theEdge->isEqual(aShape))
return aRes;
return ResultPtr();
}
+
+ResultPtr PartSet_Tools::findExternalVertex(CompositeFeaturePtr theSketch, std::shared_ptr<GeomAPI_Vertex> theVert)
+{
+ for (int i = 0; i < theSketch->numberOfSubs(); i++) {
+ FeaturePtr aFeature = theSketch->subFeature(i);
+ std::shared_ptr<SketchPlugin_Feature> aSketchFea =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSketchFea) {
+ if (aSketchFea->isExternal()) {
+ std::list<ResultPtr> aResults = aSketchFea->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
+ ResultConstructionPtr aRes =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(*aIt);
+ if (aRes) {
+ std::shared_ptr<GeomAPI_Shape> aShape = aRes->shape();
+ if (aShape) {
+ if (theVert->isEqual(aShape))
+ return aRes;
+ }
+ }
+ }
+ }
+ }
+ }
+ return ResultPtr();
+}
+
+
bool PartSet_Tools::hasVertexShape(const ModuleBase_ViewerPrs& thePrs, FeaturePtr theSketch,
Handle_V3d_View theView, double& theX, double& theY)
{
return aHasVertex;
}
+
+GeomShapePtr PartSet_Tools::findShapeBy2DPoint(const AttributePtr& theAttribute,
+ ModuleBase_IWorkshop* theWorkshop)
+{
+ // 1. find an attribute value in attribute reference attribute value
+ GeomShapePtr aShape;
+ AttributeRefAttrPtr aRefAttr =
+ std::dynamic_pointer_cast<ModelAPI_AttributeRefAttr>(theAttribute);
+ if (aRefAttr) {
+ if (!aRefAttr->isObject()) {
+ AttributePtr theAttribute = aRefAttr->attr();
+ if (theAttribute.get()) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+
+ // 2. find visualized vertices of the attribute and if the attribute of the vertex is
+ // the same, return it
+ FeaturePtr anAttributeFeature = ModelAPI_Feature::feature(theAttribute->owner());
+ // 2.1 get visualized results of the feature
+ const std::list<ResultPtr>& aResList = anAttributeFeature->results();
+ std::list<ResultPtr>::const_iterator anIt = aResList.begin(), aLast = aResList.end();
+ for (; anIt != aLast; anIt++) {
+ AISObjectPtr aAISObj = aDisplayer->getAISObject(*anIt);
+ if (aAISObj.get() != NULL) {
+ Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
+ // 2.2 find selected owners of a visualizedd object
+ SelectMgr_IndexedMapOfOwner aSelectedOwners;
+ aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
+ for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {
+ Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);
+ if (!anOwner.IsNull()) {
+ Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(anOwner);
+ if (!aBRepOwner.IsNull() && aBRepOwner->HasShape()) {
+ const TopoDS_Shape& aBRepShape = aBRepOwner->Shape();
+ if (aBRepShape.ShapeType() == TopAbs_VERTEX) {
+ // 2.3 if the owner is vertex and an attribute of the vertex is equal to the initial
+ // attribute, returns the shape
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(theWorkshop->module());
+ PartSet_SketcherMgr* aSketchMgr = aModule->sketchMgr();
+ AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(anAttributeFeature,
+ aBRepShape, aSketchMgr->activeSketch());
+ if (aPntAttr.get() != NULL && aPntAttr == theAttribute) {
+ aShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape);
+ aShape->setImpl(new TopoDS_Shape(aBRepShape));
+ break;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ return aShape;
+}
+
+AttributePtr PartSet_Tools::findAttributeBy2dPoint(ObjectPtr theObj,
+ const TopoDS_Shape theShape,
+ FeaturePtr theSketch)
+{
+
+ AttributePtr anAttribute;
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObj);
+ if (aFeature) {
+ if (theShape.ShapeType() == TopAbs_VERTEX) {
+ const TopoDS_Vertex& aVertex = TopoDS::Vertex(theShape);
+ if (!aVertex.IsNull()) {
+ gp_Pnt aPoint = BRep_Tool::Pnt(aVertex);
+ std::shared_ptr<GeomAPI_Pnt> aValue = std::shared_ptr<GeomAPI_Pnt>(
+ new GeomAPI_Pnt(aPoint.X(), aPoint.Y(), aPoint.Z()));
+
+ // find the given point in the feature attributes
+ std::list<AttributePtr> anAttiributes =
+ aFeature->data()->attributes(GeomDataAPI_Point2D::typeId());
+ std::list<AttributePtr>::const_iterator anIt = anAttiributes.begin(),
+ aLast = anAttiributes.end();
+ for (; anIt != aLast && !anAttribute; anIt++) {
+ std::shared_ptr<GeomDataAPI_Point2D> aCurPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(*anIt);
+
+ std::shared_ptr<GeomAPI_Pnt> aPnt = convertTo3D(aCurPoint->x(), aCurPoint->y(), theSketch);
+ if (aPnt && (aPnt->distance(aValue) < Precision::Confusion())) {
+ anAttribute = aCurPoint;
+ break;
+ }
+ }
+ }
+ }
+ }
+ return anAttribute;
+}