-// File: PartSet_Tools.h
+// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
+
+// File: PartSet_Tools.cpp
// Created: 28 Apr 2014
// Author: Natalia ERMOLAEVA
#include <PartSet_Tools.h>
+#include <PartSet_Module.h>
+#include <PartSet_SketcherMgr.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_AttributeDouble.h>
#include <ModelAPI_AttributeRefList.h>
#include <ModelAPI_Document.h>
#include <ModelAPI_Session.h>
+#include <ModelAPI_ResultConstruction.h>
+#include <ModelAPI_Events.h>
+#include <ModelAPI_Validator.h>
+
+#include <Events_Loop.h>
+
+#include <SketcherPrs_Tools.h>
+
+#include <XGUI_ModuleConnector.h>
+#include <XGUI_Displayer.h>
+#include <XGUI_Workshop.h>
+#include <XGUI_SelectionMgr.h>
+#include <XGUI_Selection.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
#include <GeomAPI_Pln.h>
#include <GeomAPI_Pnt2d.h>
#include <GeomAPI_Pnt.h>
+#include <GeomAPI_Edge.h>
+#include <GeomAPI_Vertex.h>
#include <GeomAPI_Dir.h>
#include <GeomAPI_XYZ.h>
#include <SketchPlugin_Circle.h>
#include <SketchPlugin_Arc.h>
#include <SketchPlugin_Line.h>
+#include <SketchPlugin_Point.h>
+#include <ModuleBase_IWorkshop.h>
#include <ModuleBase_ViewerPrs.h>
+#include <ModuleBase_Tools.h>
#include <V3d_View.hxx>
#include <gp_Pln.hxx>
#include <GeomAPI_ProjectPointOnCurve.hxx>
#include <BRep_Tool.hxx>
#include <TopoDS.hxx>
+#include <TopoDS_Edge.hxx>
+#include <TopoDS_Vertex.hxx>
+#include <AIS_InteractiveObject.hxx>
+#include <StdSelect_BRepOwner.hxx>
+#include <SelectMgr_IndexedMapOfOwner.hxx>
#ifdef _DEBUG
#include <QDebug>
#endif
const double PRECISION_TOLERANCE = 0.000001;
+const int AIS_DEFAULT_WIDTH = 2;
+
+int PartSet_Tools::getAISDefaultWidth()
+{
+ return AIS_DEFAULT_WIDTH;
+}
gp_Pnt PartSet_Tools::convertClickToPoint(QPoint thePoint, Handle(V3d_View) theView)
{
return;
AttributeDoublePtr anAttr;
- boost::shared_ptr<ModelAPI_Data> aData = theSketch->data();
+ std::shared_ptr<ModelAPI_Data> aData = theSketch->data();
- boost::shared_ptr<GeomDataAPI_Point> anOrigin = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
+ std::shared_ptr<GeomDataAPI_Point> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aX = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> anY = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- aData->attribute(SketchPlugin_Sketch::DIRY_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomAPI_XYZ> anY = aNorm->xyz()->cross(aX->xyz());
gp_Pnt anOriginPnt(anOrigin->x(), anOrigin->y(), anOrigin->z());
gp_Vec aVec(anOriginPnt, thePoint);
gp_Vec anEyeVec(EyePoint, AtPoint);
anEyeVec.Normalize();
- boost::shared_ptr<GeomDataAPI_Dir> aNormal = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ std::shared_ptr<GeomDataAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::NORM_ID()));
gp_Vec aNormalVec(aNormal->x(), aNormal->y(), aNormal->z());
theY = aVec.X() * anY->x() + aVec.Y() * anY->y() + aVec.Z() * anY->z();
}
-void PartSet_Tools::convertTo3D(const double theX, const double theY, FeaturePtr theSketch,
- gp_Pnt& thePoint)
+std::shared_ptr<GeomAPI_Pnt2d> PartSet_Tools::convertTo2D(FeaturePtr theSketch,
+ const std::shared_ptr<GeomAPI_Pnt>& thePnt)
{
- if (!theSketch)
- return;
+ std::shared_ptr<GeomAPI_Pnt2d> aRes;
+ if (theSketch->getKind() != SketchPlugin_Sketch::ID())
+ return aRes;
+ std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
+ theSketch->data()->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ theSketch->data()->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ theSketch->data()->attribute(SketchPlugin_Sketch::DIRX_ID()));
+ std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
+ return thePnt->to2D(aC->pnt(), aX->dir(), aY);
+}
- boost::shared_ptr<ModelAPI_Data> aData = theSketch->data();
- boost::shared_ptr<GeomDataAPI_Point> aC = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
+std::shared_ptr<GeomAPI_Pnt> PartSet_Tools::convertTo3D(const double theX, const double theY, FeaturePtr theSketch)
+{
+ std::shared_ptr<ModelAPI_Data> aData = theSketch->data();
+
+ std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aX = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aY = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- aData->attribute(SketchPlugin_Sketch::DIRY_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
- boost::shared_ptr<GeomAPI_XYZ> aSum = aC->pnt()->xyz()->added(aX->dir()->xyz()->multiplied(theX))
- ->added(aY->dir()->xyz()->multiplied(theY));
+ std::shared_ptr<GeomAPI_Pnt2d> aPnt2d =
+ std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(theX, theY));
- boost::shared_ptr<GeomAPI_Pnt> aPoint = boost::shared_ptr<GeomAPI_Pnt>(new GeomAPI_Pnt(aSum));
- thePoint = gp_Pnt(aPoint->x(), aPoint->y(), aPoint->z());
+ return aPnt2d->to3D(aC->pnt(), aX->dir(), aY);
}
-FeaturePtr PartSet_Tools::nearestFeature(QPoint thePoint, Handle_V3d_View theView,
- FeaturePtr theSketch,
- const QList<ModuleBase_ViewerPrs>& theFeatures)
-{
- double aX, anY;
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(thePoint, theView);
- PartSet_Tools::convertTo2D(aPoint, theSketch, theView, aX, anY);
-
- FeaturePtr aFeature;
- FeaturePtr aDeltaFeature;
- double aMinDelta = -1;
- ModuleBase_ViewerPrs aPrs;
- foreach (ModuleBase_ViewerPrs aPrs, theFeatures) {
- if (!aPrs.object())
- continue;
- boost::shared_ptr<SketchPlugin_Feature> aSketchFeature = boost::dynamic_pointer_cast<
- SketchPlugin_Feature>(aPrs.object());
- if (!aSketchFeature)
- continue;
- double aDelta = aSketchFeature->distanceToPoint(
- boost::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(aX, anY)));
- if (aMinDelta < 0 || aMinDelta > aDelta) {
- aMinDelta = aDelta;
- // TODO aDeltaFeature = aPrs.result();
- }
- }
- return aDeltaFeature;
-}
-
-boost::shared_ptr<ModelAPI_Document> PartSet_Tools::document()
+std::shared_ptr<ModelAPI_Document> PartSet_Tools::document()
{
return ModelAPI_Session::get()->moduleDocument();
}
-boost::shared_ptr<GeomDataAPI_Point2D> PartSet_Tools::getFeaturePoint(FeaturePtr theFeature,
- double theX, double theY)
-{
- boost::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = boost::shared_ptr<GeomAPI_Pnt2d>(
- new GeomAPI_Pnt2d(theX, theY));
- std::list<boost::shared_ptr<ModelAPI_Attribute> > anAttiributes =
- theFeature->data()->attributes(GeomDataAPI_Point2D::type());
- std::list<boost::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt = anAttiributes.begin(),
- aLast = anAttiributes.end();
- boost::shared_ptr<GeomDataAPI_Point2D> aFPoint;
- for (; anIt != aLast && !aFPoint; anIt++) {
- boost::shared_ptr<GeomDataAPI_Point2D> aCurPoint = boost::dynamic_pointer_cast<
- GeomDataAPI_Point2D>(*anIt);
- if (aCurPoint && aCurPoint->pnt()->distance(aClickedPoint) < Precision::Confusion())
- aFPoint = aCurPoint;
- }
-
- return aFPoint;
-}
-
void PartSet_Tools::setFeatureValue(FeaturePtr theFeature, double theValue,
const std::string& theAttribute)
{
if (!theFeature)
return;
- boost::shared_ptr<ModelAPI_Data> aData = theFeature->data();
- AttributeDoublePtr anAttribute = boost::dynamic_pointer_cast<ModelAPI_AttributeDouble>(
+ std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
+ AttributeDoublePtr anAttribute = std::dynamic_pointer_cast<ModelAPI_AttributeDouble>(
aData->attribute(theAttribute));
if (anAttribute)
anAttribute->setValue(theValue);
bool& isValid)
{
isValid = false;
- double aValue;
+ double aValue = 0;
if (theFeature) {
- boost::shared_ptr<ModelAPI_Data> aData = theFeature->data();
- AttributeDoublePtr anAttribute = boost::dynamic_pointer_cast<ModelAPI_AttributeDouble>(
+ std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
+ AttributeDoublePtr anAttribute = std::dynamic_pointer_cast<ModelAPI_AttributeDouble>(
aData->attribute(theAttribute));
if (anAttribute) {
aValue = anAttribute->value();
if (!theFeature)
return aFeature;
- boost::shared_ptr<ModelAPI_Data> aData = theFeature->data();
- boost::shared_ptr<ModelAPI_AttributeRefAttr> anAttr = boost::dynamic_pointer_cast<
+ std::shared_ptr<ModelAPI_Data> aData = theFeature->data();
+ std::shared_ptr<ModelAPI_AttributeRefAttr> anAttr = std::dynamic_pointer_cast<
ModelAPI_AttributeRefAttr>(aData->attribute(theAttribute));
if (anAttr) {
- aFeature = boost::dynamic_pointer_cast<ModelAPI_Feature>(anAttr->object());
+ aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anAttr->object());
if (!theKind.empty() && aFeature && aFeature->getKind() != theKind) {
aFeature = FeaturePtr();
}
}
void PartSet_Tools::createConstraint(CompositeFeaturePtr theSketch,
- boost::shared_ptr<GeomDataAPI_Point2D> thePoint1,
- boost::shared_ptr<GeomDataAPI_Point2D> thePoint2)
+ std::shared_ptr<GeomDataAPI_Point2D> thePoint1,
+ std::shared_ptr<GeomDataAPI_Point2D> thePoint2)
{
FeaturePtr aFeature;
if (theSketch) {
aFeature = theSketch->addFeature(SketchPlugin_ConstraintCoincidence::ID());
} else {
- boost::shared_ptr<ModelAPI_Document> aDoc = document();
+ std::shared_ptr<ModelAPI_Document> aDoc = document();
aFeature = aDoc->addFeature(SketchPlugin_ConstraintCoincidence::ID());
}
- boost::shared_ptr<ModelAPI_Data> aData = aFeature->data();
+ std::shared_ptr<ModelAPI_Data> aData = aFeature->data();
- boost::shared_ptr<ModelAPI_AttributeRefAttr> aRef1 = boost::dynamic_pointer_cast<
+ std::shared_ptr<ModelAPI_AttributeRefAttr> aRef1 = std::dynamic_pointer_cast<
ModelAPI_AttributeRefAttr>(aData->attribute(SketchPlugin_Constraint::ENTITY_A()));
aRef1->setAttr(thePoint1);
- boost::shared_ptr<ModelAPI_AttributeRefAttr> aRef2 = boost::dynamic_pointer_cast<
+ std::shared_ptr<ModelAPI_AttributeRefAttr> aRef2 = std::dynamic_pointer_cast<
ModelAPI_AttributeRefAttr>(aData->attribute(SketchPlugin_Constraint::ENTITY_B()));
aRef2->setAttr(thePoint2);
- if (aFeature) // TODO: generate an error if feature was not created
- aFeature->execute();
+ // we need to flush created signal in order to coincidence is processed by solver
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_CREATED));
+}
+
+/*std::shared_ptr<GeomDataAPI_Point2D> PartSet_Tools::
+ findAttributePoint(CompositeFeaturePtr theSketch, double theX, double theY,
+ double theTolerance, const QList<FeaturePtr>& theIgnore)
+{
+ std::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(theX, theY));
+
+ std::list<std::shared_ptr<ModelAPI_Attribute> > anAttiributes;
+ for (int i = 0; i < theSketch->numberOfSubs(); i++) {
+ FeaturePtr aFeature = theSketch->subFeature(i);
+ if (!theIgnore.contains(aFeature)) {
+ anAttiributes = aFeature->data()->attributes(GeomDataAPI_Point2D::typeId());
+
+ std::list<std::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt;
+ for (anIt = anAttiributes.cbegin(); anIt != anAttiributes.cend(); ++anIt) {
+ std::shared_ptr<GeomDataAPI_Point2D> aCurPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(*anIt);
+ double x = aCurPoint->x();
+ double y = aCurPoint->y();
+ if (aCurPoint && (aCurPoint->pnt()->distance(aClickedPoint) < theTolerance)) {
+ return aCurPoint;
+ }
+ }
+ }
+ }
+ return std::shared_ptr<GeomDataAPI_Point2D>();
+}*/
+
+
+std::shared_ptr<GeomDataAPI_Point2D> PartSet_Tools::findFirstEqualPointInArgumentFeatures(
+ const FeaturePtr& theFeature, const std::shared_ptr<GeomAPI_Pnt2d>& thePoint)
+{
+ std::shared_ptr<GeomDataAPI_Point2D> aFeaturePoint;
+
+ // may be feature is not updated yet, execute is not performed and references features
+ // are not created. Case: rectangle macro feature
+ ModuleBase_Tools::flushUpdated(theFeature);
+
+ std::list<AttributePtr> anAttributes = theFeature->data()->attributes(
+ ModelAPI_AttributeRefList::typeId());
+ std::list<AttributePtr>::const_iterator anIt = anAttributes.begin(), aLast = anAttributes.end();
+ for (; anIt != aLast && !aFeaturePoint.get(); anIt++) {
+ std::shared_ptr<ModelAPI_AttributeRefList> aCurSelList =
+ std::dynamic_pointer_cast<ModelAPI_AttributeRefList>(*anIt);
+ for (int i = 0, aNb = aCurSelList->size(); i < aNb && !aFeaturePoint.get(); i++) {
+ ObjectPtr anObject = aCurSelList->object(i);
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
+ if (aFeature.get())
+ aFeaturePoint = PartSet_Tools::findFirstEqualPoint(aFeature, thePoint);
+ }
+ }
+ return aFeaturePoint;
+}
+
+std::shared_ptr<GeomDataAPI_Point2D> PartSet_Tools::findFirstEqualPoint(const FeaturePtr& theFeature,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePoint)
+{
+ std::shared_ptr<GeomDataAPI_Point2D> aFPoint;
+
+ // find the given point in the feature attributes
+ std::list<std::shared_ptr<ModelAPI_Attribute> > anAttiributes =
+ theFeature->data()->attributes(GeomDataAPI_Point2D::typeId());
+ std::list<std::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt = anAttiributes.begin(),
+ aLast = anAttiributes.end();
+ ModelAPI_ValidatorsFactory* aValidators = ModelAPI_Session::get()->validators();
+
+ for (; anIt != aLast && !aFPoint; anIt++) {
+ std::shared_ptr<GeomDataAPI_Point2D> aCurPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(*anIt);
+ if (aCurPoint && aCurPoint->isInitialized() &&
+ aValidators->isCase(theFeature, aCurPoint->id()) &&
+ (aCurPoint->pnt()->distance(thePoint) < Precision::Confusion())) {
+ aFPoint = aCurPoint;
+ break;
+ }
+ }
+ return aFPoint;
}
void PartSet_Tools::setConstraints(CompositeFeaturePtr theSketch, FeaturePtr theFeature,
const std::string& theAttribute, double theClickedX,
double theClickedY)
{
+ if (!theFeature.get())
+ return;
+
+ std::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(theClickedX, theClickedY));
+
// find a feature point by the selection mode
- //boost::shared_ptr<GeomDataAPI_Point2D> aPoint = featurePoint(theMode);
- boost::shared_ptr<GeomDataAPI_Point2D> aFeaturePoint = boost::dynamic_pointer_cast<
- GeomDataAPI_Point2D>(theFeature->data()->attribute(theAttribute));
+ std::shared_ptr<GeomDataAPI_Point2D> aFeaturePoint;
+ if (theFeature->isMacro()) {
+ // the macro feature will be removed after the operation is stopped, so we need to build
+ // coicidence to possible sub-features
+ aFeaturePoint = PartSet_Tools::findFirstEqualPointInArgumentFeatures(theFeature, aClickedPoint);
+ }
+ else {
+ aFeaturePoint = std::dynamic_pointer_cast<
+ GeomDataAPI_Point2D>(theFeature->data()->attribute(theAttribute));
+ }
if (!aFeaturePoint)
return;
// get all sketch features. If the point with the given coordinates belong to any sketch feature,
// the constraint is created between the feature point and the found sketch point
- boost::shared_ptr<ModelAPI_Data> aData = theSketch->data();
- boost::shared_ptr<ModelAPI_AttributeRefList> aRefList = boost::dynamic_pointer_cast<
+ std::shared_ptr<ModelAPI_Data> aData = theSketch->data();
+ std::shared_ptr<ModelAPI_AttributeRefList> aRefList = std::dynamic_pointer_cast<
ModelAPI_AttributeRefList>(aData->attribute(SketchPlugin_Sketch::FEATURES_ID()));
std::list<ObjectPtr> aFeatures = aRefList->list();
std::list<ObjectPtr>::const_iterator anIt = aFeatures.begin(), aLast = aFeatures.end();
- std::list<boost::shared_ptr<ModelAPI_Attribute> > anAttiributes;
- boost::shared_ptr<GeomAPI_Pnt2d> aClickedPoint = boost::shared_ptr<GeomAPI_Pnt2d>(
- new GeomAPI_Pnt2d(theClickedX, theClickedY));
+ std::list<std::shared_ptr<ModelAPI_Attribute> > anAttiributes;
for (; anIt != aLast; anIt++) {
- FeaturePtr aFeature = boost::dynamic_pointer_cast<ModelAPI_Feature>(*anIt);
- // find the given point in the feature attributes
- anAttiributes = aFeature->data()->attributes(GeomDataAPI_Point2D::type());
- std::list<boost::shared_ptr<ModelAPI_Attribute> >::const_iterator anIt = anAttiributes.begin(),
- aLast = anAttiributes.end();
- boost::shared_ptr<GeomDataAPI_Point2D> aFPoint;
- for (; anIt != aLast && !aFPoint; anIt++) {
- boost::shared_ptr<GeomDataAPI_Point2D> aCurPoint = boost::dynamic_pointer_cast<
- GeomDataAPI_Point2D>(*anIt);
- if (aCurPoint && aCurPoint->pnt()->distance(aClickedPoint) < Precision::Confusion())
- aFPoint = aCurPoint;
- }
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(*anIt);
+ if (!aFeature.get() || theFeature == aFeature)
+ continue;
+ std::shared_ptr<GeomDataAPI_Point2D> aFPoint = PartSet_Tools::findFirstEqualPoint(aFeature,
+ aClickedPoint);
if (aFPoint)
PartSet_Tools::createConstraint(theSketch, aFPoint, aFeaturePoint);
}
}
-boost::shared_ptr<GeomAPI_Pln> PartSet_Tools::sketchPlane(CompositeFeaturePtr theSketch)
+std::shared_ptr<GeomAPI_Pln> PartSet_Tools::sketchPlane(CompositeFeaturePtr theSketch)
{
- boost::shared_ptr<GeomAPI_Pln> aPlane;
- double aA, aB, aC, aD;
+ std::shared_ptr<GeomAPI_Pln> aPlane;
- boost::shared_ptr<ModelAPI_Data> aData = theSketch->data();
- boost::shared_ptr<GeomDataAPI_Point> anOrigin = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
- aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aNormal = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- aData->attribute(SketchPlugin_Sketch::NORM_ID()));
- aA = aNormal->x();
- aB = aNormal->y();
- aC = aNormal->z();
- aD = 0;
+ std::shared_ptr<GeomDataAPI_Point> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
+ theSketch->data()->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNormal = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ theSketch->data()->attribute(SketchPlugin_Sketch::NORM_ID()));
+
+ if (aNormal.get() && aNormal->isInitialized() &&
+ anOrigin.get() && anOrigin->isInitialized())
+ aPlane = std::shared_ptr<GeomAPI_Pln>(new GeomAPI_Pln(anOrigin->pnt(), aNormal->dir()));
- aPlane = boost::shared_ptr<GeomAPI_Pln>(new GeomAPI_Pln(aA, aB, aC, aD));
return aPlane;
}
-boost::shared_ptr<GeomAPI_Pnt> PartSet_Tools::point3D(boost::shared_ptr<GeomAPI_Pnt2d> thePoint2D,
+std::shared_ptr<GeomAPI_Pnt> PartSet_Tools::point3D(std::shared_ptr<GeomAPI_Pnt2d> thePoint2D,
CompositeFeaturePtr theSketch)
{
- boost::shared_ptr<GeomAPI_Pnt> aPoint;
+ std::shared_ptr<GeomAPI_Pnt> aPoint;
if (!theSketch || !thePoint2D)
return aPoint;
- boost::shared_ptr<GeomDataAPI_Point> aC = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
- theSketch->data()->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aX = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- theSketch->data()->attribute(SketchPlugin_Sketch::DIRX_ID()));
- boost::shared_ptr<GeomDataAPI_Dir> aY = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
- theSketch->data()->attribute(SketchPlugin_Sketch::DIRY_ID()));
+ DataPtr aData = theSketch->data();
+ std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
+ aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::DIRX_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
- return thePoint2D->to3D(aC->pnt(), aX->dir(), aY->dir());
+ return thePoint2D->to3D(aC->pnt(), aX->dir(), aY);
}
-bool PartSet_Tools::isConstraintFeature(const std::string& theKind)
+ResultPtr PartSet_Tools::findFixedObjectByExternal(const TopoDS_Shape& theShape,
+ const ObjectPtr& theObject,
+ CompositeFeaturePtr theSketch)
{
- return theKind == SketchPlugin_ConstraintDistance::ID()
- || theKind == SketchPlugin_ConstraintLength::ID()
- || theKind == SketchPlugin_ConstraintRadius::ID()
- || theKind == SketchPlugin_ConstraintRigid::ID();
+ ResultPtr aResult;
+ if (theShape.ShapeType() == TopAbs_EDGE) {
+ // Check that we already have such external edge
+ std::shared_ptr<GeomAPI_Edge> aInEdge = std::shared_ptr<GeomAPI_Edge>(new GeomAPI_Edge());
+ aInEdge->setImpl(new TopoDS_Shape(theShape));
+ aResult = findExternalEdge(theSketch, aInEdge);
+ }
+ if (theShape.ShapeType() == TopAbs_VERTEX) {
+ std::shared_ptr<GeomAPI_Vertex> aInVert = std::shared_ptr<GeomAPI_Vertex>(new GeomAPI_Vertex());
+ aInVert->setImpl(new TopoDS_Shape(theShape));
+ aResult = findExternalVertex(theSketch, aInVert);
+ }
+ return aResult;
}
-ResultPtr PartSet_Tools::createFixedObjectByEdge(const ModuleBase_ViewerPrs& thePrs, CompositeFeaturePtr theSketch)
+ResultPtr PartSet_Tools::createFixedObjectByExternal(const TopoDS_Shape& theShape,
+ const ObjectPtr& theObject,
+ CompositeFeaturePtr theSketch,
+ const bool theTemporary)
{
- TopoDS_Shape aShape = thePrs.shape();
- if (aShape.ShapeType() != TopAbs_EDGE)
- return ResultPtr();
-
- Standard_Real aStart, aEnd;
- Handle(V3d_View) aNullView;
- FeaturePtr aMyFeature;
-
- Handle(Geom_Curve) aCurve = BRep_Tool::Curve(TopoDS::Edge(aShape), aStart, aEnd);
- GeomAdaptor_Curve aAdaptor(aCurve);
- if (aAdaptor.GetType() == GeomAbs_Line) {
- // Create line
- aMyFeature = theSketch->addFeature(SketchPlugin_Line::ID());
-
- //DataPtr aData = myFeature->data();
- //boost::shared_ptr<GeomDataAPI_Point2D> anEndAttr =
- // boost::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
-
- //double aX, aY;
- //gp_Pnt Pnt1 = aAdaptor.Value(aStart);
- //convertTo2D(Pnt1, theSketch, aNullView, aX, aY);
- //setFeaturePoint(myFeature, aX, aY, SketchPlugin_Line::START_ID());
-
- //gp_Pnt Pnt2 = aAdaptor.Value(aEnd);
- //convertTo2D(Pnt2, theSketch, aNullView, aX, aY);
- //setFeaturePoint(myFeature, aX, aY, SketchPlugin_Line::END_ID());
- } else if (aAdaptor.GetType() == GeomAbs_Circle) {
- if (aAdaptor.IsClosed()) {
- // Create circle
- aMyFeature = theSketch->addFeature(SketchPlugin_Circle::ID());
- //gp_Circ aCirc = aAdaptor.Circle();
- //gp_Pnt aCenter = aCirc.Location();
-
- //double aX, aY;
- //convertTo2D(aCenter, theSketch, aNullView, aX, aY);
- //setFeaturePoint(myFeature, aX, aY, SketchPlugin_Circle::CENTER_ID());
- //setFeatureValue(myFeature, aCirc.Radius(), SketchPlugin_Circle::RADIUS_ID());
- } else {
- // Create arc
- aMyFeature = theSketch->addFeature(SketchPlugin_Arc::ID());
+ if (theShape.ShapeType() == TopAbs_EDGE) {
+ Standard_Real aStart, aEnd;
+ Handle(V3d_View) aNullView;
+ FeaturePtr aMyFeature;
+
+ Handle(Geom_Curve) aCurve = BRep_Tool::Curve(TopoDS::Edge(theShape), aStart, aEnd);
+ GeomAdaptor_Curve aAdaptor(aCurve);
+ std::shared_ptr<GeomAPI_Edge> anEdge = std::shared_ptr<GeomAPI_Edge>(new GeomAPI_Edge);
+ anEdge->setImpl(new TopoDS_Shape(theShape));
+ if (aAdaptor.GetType() == GeomAbs_Line) {
+ // Create line
+ aMyFeature = theSketch->addFeature(SketchPlugin_Line::ID());
+ if (!theObject.get()) {
+ // There is no selected result
+ std::shared_ptr<GeomAPI_Pnt> aPnt1 = anEdge->firstPoint();
+ std::shared_ptr<GeomAPI_Pnt> aPnt2 = anEdge->lastPoint();
+ std::shared_ptr<GeomAPI_Pnt2d> aPnt2d1 = convertTo2D(theSketch, aPnt1);
+ std::shared_ptr<GeomAPI_Pnt2d> aPnt2d2 = convertTo2D(theSketch, aPnt2);
+
+ std::shared_ptr<ModelAPI_Data> aData = aMyFeature->data();
+ std::shared_ptr<GeomDataAPI_Point2D> aPoint1 =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::START_ID()));
+ std::shared_ptr<GeomDataAPI_Point2D> aPoint2 =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
+
+ aPoint1->setValue(aPnt2d1);
+ aPoint2->setValue(aPnt2d2);
+
+ // If this is an axis then its name has to be changed correspondently
+ std::string aSuffix = "";
+ bool aXdir = fabs(aPnt1->x() - aPnt2->x()) > Precision::Confusion();
+ bool aYdir = fabs(aPnt1->y() - aPnt2->y()) > Precision::Confusion();
+ bool aZdir = fabs(aPnt1->z() - aPnt2->z()) > Precision::Confusion();
+ if (aXdir && (!aYdir) && (!aZdir))
+ aSuffix = "X";
+ else if ((!aXdir) && aYdir && (!aZdir))
+ aSuffix = "Y";
+ else if ((!aXdir) && (!aYdir) && aZdir)
+ aSuffix = "Z";
+ if (aSuffix.length() > 0)
+ aData->setName("Axis_" + aSuffix);
+ aMyFeature->execute();
+
+ }
+ } else if (aAdaptor.GetType() == GeomAbs_Circle) {
+ if (anEdge->isArc()) {
+ // Create arc
+ aMyFeature = theSketch->addFeature(SketchPlugin_Arc::ID());
+ }
+ else {
+ // Create circle
+ aMyFeature = theSketch->addFeature(SketchPlugin_Circle::ID());
+ }
+ }
+ if (aMyFeature) {
+ DataPtr aData = aMyFeature->data();
+ AttributeSelectionPtr anAttr =
+ std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+
+ ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
+ // selection shape has no result owner => the trihedron axis
+ // TODO: make reference to the real axes when they are implemented in the initialization plugin
+ if (!aRes.get()) {
+ ObjectPtr aPointObj = ModelAPI_Session::get()->moduleDocument()->objectByName(
+ ModelAPI_ResultConstruction::group(), "Origin");
+ if (aPointObj.get()) { // if initialization plugin performed well
+ aRes = std::dynamic_pointer_cast<ModelAPI_Result>(aPointObj);
+ }
+ }
+ if (!aRes.get()) {
+ aRes = aMyFeature->firstResult();
+ }
+ if (anAttr.get() && aRes.get()) {
+ std::shared_ptr<GeomAPI_Shape> anEdge(new GeomAPI_Shape);
+ anEdge->setImpl(new TopoDS_Shape(theShape));
+
+ anAttr->setValue(aRes, anEdge);
+ //if (!theTemporary) {
+ aMyFeature->execute();
+
+ // fix this edge
+ FeaturePtr aFix = theSketch->addFeature(SketchPlugin_ConstraintRigid::ID());
+ aFix->data()->refattr(SketchPlugin_Constraint::ENTITY_A())->
+ setObject(aMyFeature->lastResult());
+ //}
+ return aMyFeature->lastResult();
+ }
}
}
- if (aMyFeature) {
- DataPtr aData = aMyFeature->data();
- AttributeSelectionPtr anAttr =
- boost::dynamic_pointer_cast<ModelAPI_AttributeSelection>
- (aData->attribute(SketchPlugin_Feature::EXTERNAL_ID()));
-
- ResultPtr aRes = boost::dynamic_pointer_cast<ModelAPI_Result>(thePrs.object());
- if (anAttr && aRes) {
- boost::shared_ptr<GeomAPI_Shape> anEdge(new GeomAPI_Shape);
- anEdge->setImpl(new TopoDS_Shape(aShape));
+ if (theShape.ShapeType() == TopAbs_VERTEX) {
+ FeaturePtr aMyFeature = theSketch->addFeature(SketchPlugin_Point::ID());
+
+ if (aMyFeature) {
+ DataPtr aData = aMyFeature->data();
+ AttributeSelectionPtr anAttr =
+ std::dynamic_pointer_cast<ModelAPI_AttributeSelection>
+ (aData->attribute(SketchPlugin_SketchEntity::EXTERNAL_ID()));
+
+ ResultPtr aRes = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
+ // if there is no object, it means that this is the origin point: search it in the module document
+ if (!aRes.get()) {
+ ObjectPtr aPointObj = ModelAPI_Session::get()->moduleDocument()->objectByName(
+ ModelAPI_ResultConstruction::group(), "Origin");
+ if (aPointObj.get()) { // if initialization plugin performed well
+ aRes = std::dynamic_pointer_cast<ModelAPI_Result>(aPointObj);
+ }
+ }
+ // reference to itself with name "Origin" (but this may cause the infinitive cycling)
+ if (!aRes.get()) {
+ // If the point is selected not from Result object
+ std::shared_ptr<GeomAPI_Shape> aShape =
+ std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape());
+ aShape->setImpl(new TopoDS_Shape(theShape));
+
+ std::shared_ptr<GeomAPI_Vertex> aVertex =
+ std::shared_ptr<GeomAPI_Vertex>(new GeomAPI_Vertex(aShape));
+ std::shared_ptr<GeomAPI_Pnt> aPnt = aVertex->point();
+
+ std::shared_ptr<GeomAPI_Pnt2d> aPnt2d = convertTo2D(theSketch, aPnt);
+ std::shared_ptr<GeomDataAPI_Point2D> aPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Point::COORD_ID()));
+ aPoint->setValue(aPnt2d);
+ if ((aPnt->x() < Precision::Confusion()) &&
+ (aPnt->y() < Precision::Confusion()) &&
+ (aPnt->z() < Precision::Confusion()))
+ aData->setName("Origin");
+
+ aMyFeature->execute();
+ aRes = aMyFeature->firstResult();
+ }
+ if (anAttr.get() && aRes.get()) {
+ std::shared_ptr<GeomAPI_Shape> aVert(new GeomAPI_Shape);
+ aVert->setImpl(new TopoDS_Shape(theShape));
+
+ anAttr->setValue(aRes, aVert);
+ //if (theTemporary) {
+ aMyFeature->execute();
+
+ // fix this edge
+ FeaturePtr aFix = theSketch->addFeature(SketchPlugin_ConstraintRigid::ID());
+ aFix->data()->refattr(SketchPlugin_Constraint::ENTITY_A())->
+ setObject(aMyFeature->lastResult());
+ //}
+ return aMyFeature->lastResult();
+ }
+ }
+ }
+ return ResultPtr();
+}
- anAttr->setValue(aRes, anEdge);
+bool PartSet_Tools::isContainPresentation(const QList<ModuleBase_ViewerPrsPtr>& theSelected,
+ const ModuleBase_ViewerPrsPtr& thePrs)
+{
+ foreach (ModuleBase_ViewerPrsPtr aPrs, theSelected) {
+ if (aPrs->object() == thePrs->object())
+ return true;
+ }
+ return false;
+}
- aMyFeature->execute();
+ResultPtr PartSet_Tools::findExternalEdge(CompositeFeaturePtr theSketch, std::shared_ptr<GeomAPI_Edge> theEdge)
+{
+ for (int i = 0; i < theSketch->numberOfSubs(); i++) {
+ FeaturePtr aFeature = theSketch->subFeature(i);
+ std::shared_ptr<SketchPlugin_Feature> aSketchFea =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSketchFea) {
+ if (aSketchFea->isExternal()) {
+ std::list<ResultPtr> aResults = aSketchFea->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
+ ResultConstructionPtr aRes =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(*aIt);
+ if (aRes) {
+ std::shared_ptr<GeomAPI_Shape> aShape = aRes->shape();
+ if (aShape) {
+ if (theEdge->isEqual(aShape))
+ return aRes;
+ }
+ }
+ }
+ }
+ }
+ }
+ return ResultPtr();
+}
- // fix this edge
- FeaturePtr aFix = theSketch->addFeature(SketchPlugin_ConstraintRigid::ID());
- aFix->data()->refattr(SketchPlugin_Constraint::ENTITY_A())->
- setObject(aMyFeature->lastResult());
- return aMyFeature->lastResult();
+ResultPtr PartSet_Tools::findExternalVertex(CompositeFeaturePtr theSketch, std::shared_ptr<GeomAPI_Vertex> theVert)
+{
+ for (int i = 0; i < theSketch->numberOfSubs(); i++) {
+ FeaturePtr aFeature = theSketch->subFeature(i);
+ std::shared_ptr<SketchPlugin_Feature> aSketchFea =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSketchFea) {
+ if (aSketchFea->isExternal()) {
+ std::list<ResultPtr> aResults = aSketchFea->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
+ ResultConstructionPtr aRes =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(*aIt);
+ if (aRes) {
+ std::shared_ptr<GeomAPI_Shape> aShape = aRes->shape();
+ if (aShape) {
+ if (theVert->isEqual(aShape))
+ return aRes;
+ }
+ }
+ }
+ }
}
}
return ResultPtr();
}
-bool PartSet_Tools::isContainPresentation(const QList<ModuleBase_ViewerPrs>& theSelected,
- const ModuleBase_ViewerPrs& thePrs)
+
+bool PartSet_Tools::hasVertexShape(const ModuleBase_ViewerPrsPtr& thePrs, FeaturePtr theSketch,
+ Handle_V3d_View theView, double& theX, double& theY)
{
- foreach (ModuleBase_ViewerPrs aPrs, theSelected) {
- if (aPrs.object() == thePrs.object())
- return true;
+ bool aHasVertex = false;
+
+ const GeomShapePtr& aShape = thePrs->shape();
+ if (aShape.get() && !aShape->isNull() && aShape->shapeType() == GeomAPI_Shape::VERTEX)
+ {
+ const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
+ const TopoDS_Vertex& aVertex = TopoDS::Vertex(aTDShape);
+ if (!aVertex.IsNull())
+ {
+ gp_Pnt aPoint = BRep_Tool::Pnt(aVertex);
+ PartSet_Tools::convertTo2D(aPoint, theSketch, theView, theX, theY);
+ aHasVertex = true;
+ }
}
- return false;
+
+ return aHasVertex;
+}
+
+GeomShapePtr PartSet_Tools::findShapeBy2DPoint(const AttributePtr& theAttribute,
+ ModuleBase_IWorkshop* theWorkshop)
+{
+ GeomShapePtr aShape;
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+
+ // 2. find visualized vertices of the attribute and if the attribute of the vertex is
+ // the same, return it
+ FeaturePtr anAttributeFeature = ModelAPI_Feature::feature(theAttribute->owner());
+ // 2.1 get visualized results of the feature
+ const std::list<ResultPtr>& aResList = anAttributeFeature->results();
+ std::list<ResultPtr>::const_iterator anIt = aResList.begin(), aLast = aResList.end();
+ for (; anIt != aLast; anIt++) {
+ AISObjectPtr aAISObj = aDisplayer->getAISObject(*anIt);
+ if (aAISObj.get() != NULL) {
+ Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
+ // 2.2 find selected owners of a visualizedd object
+ SelectMgr_IndexedMapOfOwner aSelectedOwners;
+ aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
+ for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {
+ Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);
+ if (!anOwner.IsNull()) {
+ Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(anOwner);
+ if (!aBRepOwner.IsNull() && aBRepOwner->HasShape()) {
+ const TopoDS_Shape& aBRepShape = aBRepOwner->Shape();
+ if (aBRepShape.ShapeType() == TopAbs_VERTEX) {
+ // 2.3 if the owner is vertex and an attribute of the vertex is equal to the initial
+ // attribute, returns the shape
+ PartSet_Module* aModule = dynamic_cast<PartSet_Module*>(theWorkshop->module());
+ PartSet_SketcherMgr* aSketchMgr = aModule->sketchMgr();
+ AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(anAttributeFeature,
+ aBRepShape, aSketchMgr->activeSketch());
+ if (aPntAttr.get() != NULL && aPntAttr == theAttribute) {
+ aShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape);
+ aShape->setImpl(new TopoDS_Shape(aBRepShape));
+ break;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ return aShape;
+}
+
+std::shared_ptr<GeomAPI_Pnt2d> PartSet_Tools::getPoint(std::shared_ptr<ModelAPI_Feature>& theFeature,
+ const std::string& theAttribute)
+{
+ std::shared_ptr<GeomDataAPI_Point2D> aPointAttr;
+
+ if (!theFeature->data())
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+
+ FeaturePtr aFeature;
+ std::shared_ptr<ModelAPI_AttributeRefAttr> anAttr = std::dynamic_pointer_cast<
+ ModelAPI_AttributeRefAttr>(theFeature->data()->attribute(theAttribute));
+ if (!anAttr)
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+
+ aFeature = ModelAPI_Feature::feature(anAttr->object());
+
+ if (aFeature && aFeature->getKind() == SketchPlugin_Point::ID())
+ aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ aFeature->data()->attribute(SketchPlugin_Point::COORD_ID()));
+
+ else if (anAttr->attr()) {
+ aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttr->attr());
+ }
+ if (aPointAttr.get() != NULL)
+ return aPointAttr->pnt();
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+}
+
+FeaturePtr findFirstCoincidenceByData(const DataPtr& theData, std::shared_ptr<GeomAPI_Pnt2d> thePoint)
+{
+ FeaturePtr aCoincident;
+
+ const std::set<AttributePtr>& aRefsList = theData->refsToMe();
+ std::set<AttributePtr>::const_iterator aIt;
+ for (aIt = aRefsList.cbegin(); aIt != aRefsList.cend(); ++aIt) {
+ std::shared_ptr<ModelAPI_Attribute> aAttr = (*aIt);
+ FeaturePtr aConstrFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aAttr->owner());
+ if (aConstrFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID()) {
+ std::shared_ptr<GeomAPI_Pnt2d> a2dPnt =
+ PartSet_Tools::getPoint(aConstrFeature, SketchPlugin_ConstraintCoincidence::ENTITY_A());
+ if (a2dPnt.get() && thePoint->isEqual(a2dPnt)) {
+ aCoincident = aConstrFeature;
+ break;
+ } else {
+ a2dPnt = PartSet_Tools::getPoint(aConstrFeature,
+ SketchPlugin_ConstraintCoincidence::ENTITY_B());
+ if (a2dPnt.get() && thePoint->isEqual(a2dPnt)) {
+ aCoincident = aConstrFeature;
+ break;
+ }
+ }
+ }
+ }
+ return aCoincident;
+}
+
+FeaturePtr PartSet_Tools::findFirstCoincidence(const FeaturePtr& theFeature,
+ std::shared_ptr<GeomAPI_Pnt2d> thePoint)
+{
+ FeaturePtr aCoincident;
+ if (theFeature.get() == NULL)
+ return aCoincident;
+
+ const std::set<AttributePtr>& aRefsList = theFeature->data()->refsToMe();
+ std::set<AttributePtr>::const_iterator aIt;
+ for (aIt = aRefsList.cbegin(); aIt != aRefsList.cend(); ++aIt) {
+ std::shared_ptr<ModelAPI_Attribute> aAttr = (*aIt);
+ FeaturePtr aConstrFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aAttr->owner());
+ if (aConstrFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID()) {
+ std::shared_ptr<GeomAPI_Pnt2d> a2dPnt =
+ PartSet_Tools::getPoint(aConstrFeature, SketchPlugin_ConstraintCoincidence::ENTITY_A());
+ if (a2dPnt.get() && thePoint->isEqual(a2dPnt)) {
+ aCoincident = aConstrFeature;
+ break;
+ } else {
+ a2dPnt = PartSet_Tools::getPoint(aConstrFeature,
+ SketchPlugin_ConstraintCoincidence::ENTITY_B());
+ if (a2dPnt.get() && thePoint->isEqual(a2dPnt)) {
+ aCoincident = aConstrFeature;
+ break;
+ }
+ }
+ }
+ }
+ /// Find by result
+ if (!aCoincident.get()) {
+ std::list<ResultPtr> aResults = theFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
+ ResultPtr aResult = *aIt;
+ aCoincident = findFirstCoincidenceByData(aResult->data(), thePoint);
+ if (aCoincident.get())
+ break;
+ }
+ }
+ return aCoincident;
+}
+
+void PartSet_Tools::findCoincidences(FeaturePtr theStartCoin, QList<FeaturePtr>& theList,
+ QList<FeaturePtr>& theCoincidencies,
+ std::string theAttr)
+{
+ std::shared_ptr<GeomAPI_Pnt2d> aOrig = getCoincedencePoint(theStartCoin);
+ if (aOrig.get() == NULL)
+ return;
+
+ AttributeRefAttrPtr aPnt = theStartCoin->refattr(theAttr);
+ if (!aPnt)
+ return;
+ ObjectPtr aObj = aPnt->object();
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
+ if (aFeature.get()) {
+ if (!theList.contains(aFeature)) {
+ theList.append(aFeature);
+ theCoincidencies.append(theStartCoin);
+ const std::set<AttributePtr>& aRefsList = aFeature->data()->refsToMe();
+ std::set<AttributePtr>::const_iterator aIt;
+ for (aIt = aRefsList.cbegin(); aIt != aRefsList.cend(); ++aIt) {
+ std::shared_ptr<ModelAPI_Attribute> aAttr = (*aIt);
+ FeaturePtr aConstrFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aAttr->owner());
+ if (aConstrFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID()) {
+ if (!theCoincidencies.contains(aConstrFeature)) {
+ std::shared_ptr<GeomAPI_Pnt2d> aPnt = getCoincedencePoint(aConstrFeature);
+ if (aPnt.get() && aOrig->isEqual(aPnt)) {
+ findCoincidences(aConstrFeature, theList, theCoincidencies,
+ SketchPlugin_ConstraintCoincidence::ENTITY_A());
+ findCoincidences(aConstrFeature, theList, theCoincidencies,
+ SketchPlugin_ConstraintCoincidence::ENTITY_B());
+ }
+ }
+ }
+ }
+ }
+ } else {
+ // Find by Results
+ ResultConstructionPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(aObj);
+ if (aResult.get()) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aPnt->object());
+ if (!theList.contains(aFeature))
+ theList.append(aFeature);
+ theCoincidencies.append(theStartCoin);
+
+ const std::set<AttributePtr>& aRefsList = aResult->data()->refsToMe();
+ std::set<AttributePtr>::const_iterator aIt;
+ for (aIt = aRefsList.cbegin(); aIt != aRefsList.cend(); ++aIt) {
+ std::shared_ptr<ModelAPI_Attribute> aAttr = (*aIt);
+ FeaturePtr aConstrFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aAttr->owner());
+ if (aConstrFeature->getKind() == SketchPlugin_ConstraintCoincidence::ID()) {
+ if (!theCoincidencies.contains(aConstrFeature)) {
+ std::shared_ptr<GeomAPI_Pnt2d> aPnt = getCoincedencePoint(aConstrFeature);
+ if (aPnt.get() && aOrig->isEqual(aPnt)) {
+ findCoincidences(aConstrFeature, theList, theCoincidencies,
+ SketchPlugin_ConstraintCoincidence::ENTITY_A());
+ findCoincidences(aConstrFeature, theList, theCoincidencies,
+ SketchPlugin_ConstraintCoincidence::ENTITY_B());
+ }
+ }
+ }
+ }
+ }
+ }
+}
+
+std::shared_ptr<GeomAPI_Pnt2d> PartSet_Tools::getCoincedencePoint(FeaturePtr theStartCoin)
+{
+ std::shared_ptr<GeomAPI_Pnt2d> aPnt = SketcherPrs_Tools::getPoint(theStartCoin.get(),
+ SketchPlugin_Constraint::ENTITY_A());
+ if (aPnt.get() == NULL)
+ aPnt = SketcherPrs_Tools::getPoint(theStartCoin.get(), SketchPlugin_Constraint::ENTITY_B());
+ return aPnt;
+}
+
+AttributePtr PartSet_Tools::findAttributeBy2dPoint(ObjectPtr theObj,
+ const TopoDS_Shape theShape,
+ FeaturePtr theSketch)
+{
+
+ AttributePtr anAttribute;
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObj);
+ if (aFeature) {
+ if (theShape.ShapeType() == TopAbs_VERTEX) {
+ const TopoDS_Vertex& aVertex = TopoDS::Vertex(theShape);
+ if (!aVertex.IsNull()) {
+ gp_Pnt aPoint = BRep_Tool::Pnt(aVertex);
+ std::shared_ptr<GeomAPI_Pnt> aValue = std::shared_ptr<GeomAPI_Pnt>(
+ new GeomAPI_Pnt(aPoint.X(), aPoint.Y(), aPoint.Z()));
+
+ // find the given point in the feature attributes
+ std::list<AttributePtr> anAttiributes =
+ aFeature->data()->attributes(GeomDataAPI_Point2D::typeId());
+ std::list<AttributePtr>::const_iterator anIt = anAttiributes.begin(),
+ aLast = anAttiributes.end();
+ for (; anIt != aLast && !anAttribute; anIt++) {
+ std::shared_ptr<GeomDataAPI_Point2D> aCurPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(*anIt);
+
+ std::shared_ptr<GeomAPI_Pnt> aPnt = convertTo3D(aCurPoint->x(), aCurPoint->y(), theSketch);
+ if (aPnt && (aPnt->distance(aValue) < Precision::Confusion())) {
+ anAttribute = aCurPoint;
+ break;
+ }
+ }
+ }
+ }
+ }
+ return anAttribute;
+}
+
+void PartSet_Tools::sendSubFeaturesEvent(const CompositeFeaturePtr& theComposite,
+ const Events_ID theEventId)
+{
+ if (!theComposite.get())
+ return;
+
+ static Events_Loop* aLoop = Events_Loop::loop();
+ for (int i = 0; i < theComposite->numberOfSubs(); i++) {
+ FeaturePtr aSubFeature = theComposite->subFeature(i);
+ static const ModelAPI_EventCreator* aECreator = ModelAPI_EventCreator::get();
+ aECreator->sendUpdated(aSubFeature, theEventId);
+ }
+ Events_Loop::loop()->flush(theEventId);
+}
+
+bool PartSet_Tools::isAuxiliarySketchEntity(const ObjectPtr& theObject)
+{
+ bool isAuxiliaryFeature = false;
+
+ FeaturePtr anObjectFeature = ModelAPI_Feature::feature(theObject);
+ std::string anAuxiliaryAttribute = SketchPlugin_SketchEntity::AUXILIARY_ID();
+ AttributeBooleanPtr anAuxiliaryAttr = std::dynamic_pointer_cast<ModelAPI_AttributeBoolean>(
+ anObjectFeature->data()->attribute(anAuxiliaryAttribute));
+ if (anAuxiliaryAttr.get())
+ isAuxiliaryFeature = anAuxiliaryAttr->value();
+
+
+ return isAuxiliaryFeature;
}
