#include "PartSet_SketcherReetntrantMgr.h"
#include "PartSet_Module.h"
#include "PartSet_SketcherMgr.h"
-#include "PartSet_WidgetPoint2D.h"
+#include "PartSet_WidgetPoint2d.h"
#include "ModelAPI_Session.h"
+#include "ModelAPI_AttributeString.h"
+#include "ModelAPI_AttributeRefAttr.h"
+
+#include "GeomDataAPI_Point2D.h"
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_OperationFeature.h>
#include <ModuleBase_ModelWidget.h>
#include <ModuleBase_ViewerPrs.h>
#include <ModuleBase_WidgetSelector.h>
+#include <ModuleBase_PageWidget.h>
+#include <ModuleBase_PageBase.h>
+#include <ModuleBase_WidgetFactory.h>
+#include <ModuleBase_OperationDescription.h>
+#include "ModuleBase_ToolBox.h"
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Line.h>
+#include <SketchPlugin_Arc.h>
+#include <SketchPlugin_Circle.h>
#include <XGUI_Workshop.h>
#include <XGUI_ModuleConnector.h>
#include <XGUI_OperationMgr.h>
+#include <XGUI_PropertyPanel.h>
+#include <XGUI_ErrorMgr.h>
+
+#include <QToolButton>
PartSet_SketcherReetntrantMgr::PartSet_SketcherReetntrantMgr(ModuleBase_IWorkshop* theWorkshop)
: QObject(theWorkshop),
myWorkshop(theWorkshop),
+ myRestartingMode(RM_None),
+ myIsFlagsBlocked(false),
myIsInternalEditOperation(false),
- myLastOperationId(""),
- myPreviousAttributeID(""),
- myRestartingMode(RM_None)
+ myNoMoreWidgetsAttribute("")
{
}
{
}
-ModuleBase_ModelWidget* PartSet_SketcherReetntrantMgr::activeWidget() const
+ModuleBase_ModelWidget* PartSet_SketcherReetntrantMgr::internalActiveWidget() const
{
ModuleBase_ModelWidget* aWidget = 0;
if (!isActiveMgr())
return aWidget;
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation) {
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
- if (myIsInternalEditOperation && (!anActiveWidget || !anActiveWidget->isViewerSelector())) {
- // finds the first widget which can accept a value
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- ModuleBase_ModelWidget* aFirstWidget = 0;
- ModuleBase_ModelWidget* aWgt;
- QList<ModuleBase_ModelWidget*>::const_iterator aWIt;
- for (aWIt = aWidgets.begin(); aWIt != aWidgets.end() && !aFirstWidget; ++aWIt) {
- aWgt = (*aWIt);
- if (aWgt->canSetValue())
- aFirstWidget = aWgt;
- }
- if (aFirstWidget)
- aWidget = aFirstWidget;
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if (anOperation) {
+ ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
+ if (aPanel) { // check for case when the operation is started but property panel is not filled
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ if (myIsInternalEditOperation && (!anActiveWidget || !anActiveWidget->isViewerSelector()))
+ aWidget = myInternalActiveWidget;
}
}
return aWidget;
}
-bool PartSet_SketcherReetntrantMgr::operationCommitted(ModuleBase_Operation* theOperation)
+bool PartSet_SketcherReetntrantMgr::isInternalEditActive() const
{
- bool aProcessed = false;
- if (!isActiveMgr())
- return aProcessed;
-
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
- if (!aFOperation)
- return aProcessed;
+ return myIsInternalEditOperation;
+}
- FeaturePtr aFeature = aFOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
- myRestartingMode == RM_EmptyFeatureUsed)) {
- myLastOperationId = aFOperation->id().toStdString();
- myLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature() : FeaturePtr();
- PartSet_Module* aModule = module();
- if (!aModule->sketchMgr()->sketchSolverError()) {
- if (!aFOperation->isEditOperation()) {
- FeaturePtr anOperationFeature = aFOperation->feature();
- if (anOperationFeature.get() != NULL) {
- aModule->editFeature(anOperationFeature);
- aProcessed = true;
-
- myIsInternalEditOperation = true;
- // activate selection filters of the first widget in the viewer
- onInternalActivateFirstWidgetSelection();
-
- // activate the last active widget in the Property Panel
- if (!myPreviousAttributeID.empty()) {
- ModuleBase_Operation* anEditOperation = aModule->currentOperation();
- if (anEditOperation) {
- ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
- ModuleBase_ModelWidget* aPreviousAttributeWidget = 0;
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- for (int i = 0, aNb = aWidgets.size(); i < aNb && !aPreviousAttributeWidget; i++) {
- if (aWidgets[i]->attributeID() == myPreviousAttributeID)
- aPreviousAttributeWidget = aWidgets[i];
- }
- // If the current widget is a selector, do nothing, it processes the mouse press
- if (aPreviousAttributeWidget && !aPreviousAttributeWidget->isViewerSelector())
- aPreviousAttributeWidget->focusTo();
- }
- }
- }
- }
- else {
- // the flag should be reset before start to do not react to the widget deactivate
+void PartSet_SketcherReetntrantMgr::updateInternalEditActiveState()
+{
+ if (myIsInternalEditOperation) {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ QString anError = myWorkshop->module()->getFeatureError(aFeature);
+ // stop started internal edit operation as soon as the operation becomes invalid
+ // it is especially important for the sketch tangent arc feature
+ if (!anError.isEmpty()) {
+ aFOperation->setEditOperation(false);
+ //workshop()->operationMgr()->updateApplyOfOperations();
+ beforeStopInternalEdit();
myIsInternalEditOperation = false;
- aModule->launchOperation(myLastOperationId.c_str());
- breakOperationSequence();
- aProcessed = true;
+ updateAcceptAllAction();
}
}
}
+}
- if (!aProcessed)
- breakOperationSequence();
+bool PartSet_SketcherReetntrantMgr::operationCommitted(ModuleBase_Operation* theOperation)
+{
+ bool aProcessed = false;
+ if (!isActiveMgr())
+ return aProcessed;
+
+ aProcessed = myIsInternalEditOperation;
+ resetFlags();
return aProcessed;
}
-void PartSet_SketcherReetntrantMgr::operationAborted(ModuleBase_Operation* theOperation)
+void PartSet_SketcherReetntrantMgr::operationStarted(ModuleBase_Operation* theOperation)
{
if (!isActiveMgr())
return;
- if (myIsInternalEditOperation) {
- // abort the created feature, which is currently edited
- SessionPtr aMgr = ModelAPI_Session::get();
- if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
- aMgr->undo();
- }
+ if (myPreviousFeature.get() && myRestartingMode == RM_LastFeatureUsed) {
+ ModuleBase_OperationFeature* aCurrentOperation = dynamic_cast<ModuleBase_OperationFeature*>(
+ myWorkshop->currentOperation());
+ CompositeFeaturePtr aSketch = module()->sketchMgr()->activeSketch();
+ copyReetntrantAttributes(myPreviousFeature, aCurrentOperation->feature(), aSketch);
}
- myIsInternalEditOperation = false;
- breakOperationSequence();
+ resetFlags();
}
-bool PartSet_SketcherReetntrantMgr::processMouseMoved()
+void PartSet_SketcherReetntrantMgr::operationAborted(ModuleBase_Operation* theOperation)
+{
+ if (!isActiveMgr())
+ return;
+
+ resetFlags();
+}
+
+bool PartSet_SketcherReetntrantMgr::processMouseMoved(ModuleBase_IViewWindow* theWnd,
+ QMouseEvent* theEvent)
{
bool aProcessed = false;
if (!isActiveMgr())
return aProcessed;
if (myIsInternalEditOperation) {
- PartSet_WidgetPoint2D* aPoint2DWdg = dynamic_cast<PartSet_WidgetPoint2D*>(module()->activeWidget());
- if (aPoint2DWdg && aPoint2DWdg->canBeActivatedByMove()) {
- ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- //if (operationMgr()->isApplyEnabled())
- anOperation->commit();
- aProcessed = true;
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+ FeaturePtr aLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature()
+ : FeaturePtr();
+ if (aLastFeature) {
+ ModuleBase_ModelWidget* anActiveWidget = module()->activeWidget();
+ ModuleBase_IPropertyPanel* aPanel = myWorkshop->currentOperation()->propertyPanel();
+
+ FeaturePtr aCurrentFeature = aFOperation->feature();
+ bool isLineFeature = false, isArcFeature = false;
+ std::string anAttributeOnStart;
+ if (aCurrentFeature->getKind() == SketchPlugin_Line::ID()) {
+ anAttributeOnStart = SketchPlugin_Line::START_ID();
+ isLineFeature = anActiveWidget->attributeID() == anAttributeOnStart;
+ }
+ else if (isTangentArc(aFOperation, module()->sketchMgr()->activeSketch())) {
+ anAttributeOnStart = SketchPlugin_Arc::TANGENT_POINT_ID();
+ isArcFeature = anActiveWidget->attributeID() == anAttributeOnStart;
+ }
+ bool aCanBeActivatedByMove = isLineFeature || isArcFeature;
+ if (aCanBeActivatedByMove) {
+ myPreviousFeature = aFOperation->feature();
+ restartOperation();
+ myPreviousFeature = FeaturePtr();
+
+ anActiveWidget = module()->activeWidget();
+ aCurrentFeature = anActiveWidget->feature();
+ aProcessed = true;
+ if (anActiveWidget->attributeID() == anAttributeOnStart) {
+ // it was not deactivated by preselection processing
+ aPanel->activateNextWidget(anActiveWidget);
+ }
+ } else {
+ // processing mouse move in active widget of restarted operation
+ ModuleBase_ModelWidget* anActiveWidget = module()->activeWidget();
+ PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
+ if (aProcessor)
+ aProcessor->mouseMoved(theWnd, theEvent);
+ }
}
}
return aProcessed;
}
-bool PartSet_SketcherReetntrantMgr::processMousePressed()
+bool PartSet_SketcherReetntrantMgr::processMousePressed(ModuleBase_IViewWindow* /* theWnd*/,
+ QMouseEvent* /* theEvent*/)
{
return isActiveMgr() && myIsInternalEditOperation;
}
-bool PartSet_SketcherReetntrantMgr::processMouseReleased()
+bool PartSet_SketcherReetntrantMgr::processMouseReleased(ModuleBase_IViewWindow* theWnd,
+ QMouseEvent* theEvent)
{
bool aProcessed = false;
if (!isActiveMgr())
if (myIsInternalEditOperation) {
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- //if (operationMgr()->isApplyEnabled())
- anOperation->commit();
- aProcessed = true;
+ ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
+
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ if (!anActiveWidget || !anActiveWidget->isViewerSelector()) {
+
+ // block of viewer update
+ // we need to block update content of the viewer because of Sketch Point feature
+ // in activate() the value of the point is initialized and it can be displayed
+ // but the default value is [0, 0]. So, we block update viewer contentent until
+ // onMouseRelease happens, which correct the point position
+ ModuleBase_Tools::blockUpdateViewer(true);
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+ myPreviousFeature = aFOperation->feature();
+ restartOperation();
+ myPreviousFeature = FeaturePtr();
+ aProcessed = true;
+
+ // fill the first widget by the mouse event point
+ // if the active widget is not the first, it means that the restarted operation is filled by
+ // the current preselection.
+ PartSet_WidgetPoint2D* aPoint2DWdg = dynamic_cast<PartSet_WidgetPoint2D*>(module()->activeWidget());
+ ModuleBase_ModelWidget* aFirstWidget = aPanel->findFirstAcceptingValueWidget();
+ if (aPoint2DWdg && aPoint2DWdg == aFirstWidget) {
+ aPoint2DWdg->mouseReleased(theWnd, theEvent);
+ }
+ // unblock viewer update
+ ModuleBase_Tools::blockUpdateViewer(false);
+ }
}
+
return aProcessed;
}
-void PartSet_SketcherReetntrantMgr::propertyPanelDefined(ModuleBase_Operation* theOperation)
+void PartSet_SketcherReetntrantMgr::onWidgetActivated()
{
if (!isActiveMgr())
return;
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
- if (!aFOperation)
+ if (!myIsInternalEditOperation)
return;
- ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
- if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation())) {
- // we have to manually activate the sketch label in edit mode
- aPanel->activateWidget(aPanel->modelWidgets().first());
- }
- else if ((aFOperation->id() == myLastOperationId.c_str()) && myLastFeature) {
- // Restart last operation type
- ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
- PartSet_WidgetPoint2D* aPoint2DWdg = dynamic_cast<PartSet_WidgetPoint2D*>(module()->activeWidget());
- if (aPoint2DWdg && aPoint2DWdg->canBeActivatedByMove()) {
- QList<ModuleBase_ViewerPrs> aSelection;
- aSelection.append(ModuleBase_ViewerPrs(myLastFeature, TopoDS_Shape(), NULL));
- if (aPoint2DWdg->setSelection(aSelection, true))
- aPanel->activateNextWidget(aPoint2DWdg);
- }
+ PartSet_Module* aModule = module();
+ ModuleBase_ModelWidget* aFirstWidget = aModule->activeWidget();
+ ModuleBase_IPropertyPanel* aPanel = aModule->currentOperation()->propertyPanel();
+ if (aFirstWidget != aPanel->activeWidget()) {
+ ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(aFirstWidget);
+ if (aWSelector)
+ aWSelector->activateSelectionAndFilters(true);
}
}
-void PartSet_SketcherReetntrantMgr::noMoreWidgets(const std::string& thePreviousAttributeID)
+void PartSet_SketcherReetntrantMgr::onNoMoreWidgets(const std::string& thePreviousAttributeID)
{
if (!isActiveMgr())
return;
- ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- if (anOperation) {
- if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ // we should avoid processing of the signal about no more widgets attributes and
+ // do this after the restart operaion is finished if it was called
+ // onNoMoreWidgets depends on myIsFlagsBlocked and fill myNoMoreWidgetsAttribute
+ // if it should be called after restart
+ if (myIsFlagsBlocked) {
+ myNoMoreWidgetsAttribute = thePreviousAttributeID;
+ return;
+ }
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+ if (!myWorkshop->module()->getFeatureError(aFOperation->feature()).isEmpty())
+ return;
+
+ if (aFOperation && module()->sketchMgr()->isNestedSketchOperation(aFOperation)) {
+ bool isStarted = false;
+ if (!module()->sketchMgr()->sketchSolverError()) {
if (myRestartingMode != RM_Forbided) {
myRestartingMode = RM_LastFeatureUsed;
- myPreviousAttributeID = thePreviousAttributeID;
+ isStarted = startInternalEdit(thePreviousAttributeID);
}
- XGUI_Workshop* aWorkshop = workshop();
- XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
- // do nothing if the feature can not be applyed
- if (anOpMgr->isApplyEnabled())
- anOperation->commit();
}
+ if (!isStarted)
+ aFOperation->commit();
}
}
-void PartSet_SketcherReetntrantMgr::vertexSelected()
+bool PartSet_SketcherReetntrantMgr::processEnter(const std::string& thePreviousAttributeID)
+{
+ bool isDone = false;
+
+ if (!isActiveMgr())
+ return isDone;
+
+ // empty previous attribute means that the Apply/Ok button has focus and the enter
+ // should not lead to start edition mode of the previous operation
+ if (thePreviousAttributeID.empty())
+ return isDone;
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+ if (!myWorkshop->module()->getFeatureError(aFOperation->feature()).isEmpty())
+ return isDone;
+
+ bool isSketchSolverError = module()->sketchMgr()->sketchSolverError();
+
+ if (!isSketchSolverError) {
+ myRestartingMode = RM_EmptyFeatureUsed;
+ isDone = startInternalEdit(thePreviousAttributeID);
+ }
+
+ return isDone;
+}
+
+void PartSet_SketcherReetntrantMgr::onVertexSelected()
{
if (!isActiveMgr())
return;
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ std::string anOperationId = anOperation->id().toStdString();
+ if (anOperationId == SketchPlugin_Line::ID() ||
+ isTangentArc(anOperation, module()->sketchMgr()->activeSketch())) {
/// If last line finished on vertex the lines creation sequence has to be break
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
}
}
-void PartSet_SketcherReetntrantMgr::enterReleased()
+void PartSet_SketcherReetntrantMgr::onBeforeStopped()
{
- if (!isActiveMgr())
+ if (!isActiveMgr() || !myIsInternalEditOperation)
return;
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
- (myWorkshop->currentOperation());
- if (/*!aFOperation->isEditOperation() || */myIsInternalEditOperation)
- myRestartingMode = RM_EmptyFeatureUsed;
+ beforeStopInternalEdit();
}
bool PartSet_SketcherReetntrantMgr::canBeCommittedByPreselection()
return !isActiveMgr() || myRestartingMode == RM_None;
}
-void PartSet_SketcherReetntrantMgr::onInternalActivateFirstWidgetSelection()
+bool PartSet_SketcherReetntrantMgr::isInternalEditStarted() const
{
- if (!isActiveMgr())
- return;
+ return myIsInternalEditOperation;
+}
- if (!myIsInternalEditOperation)
- return;
+bool PartSet_SketcherReetntrantMgr::isActiveMgr() const
+{
+ ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
- PartSet_Module* aModule = module();
- ModuleBase_ModelWidget* aFirstWidget = aModule->activeWidget();
- ModuleBase_IPropertyPanel* aPanel = aModule->currentOperation()->propertyPanel();
- if (aFirstWidget != aPanel->activeWidget()) {
- ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(aFirstWidget);
+ bool anActive = PartSet_SketcherMgr::isSketchOperation(aCurrentOperation);
+ if (!anActive) {
+ anActive = module()->sketchMgr()->isNestedSketchOperation(aCurrentOperation);
+ if (anActive) { // the manager is not active when the current operation is a usual Edit
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+ if (aFOperation->isEditOperation())
+ anActive = myIsInternalEditOperation;
+ }
+ }
+ return anActive;
+}
+
+bool PartSet_SketcherReetntrantMgr::startInternalEdit(const std::string& thePreviousAttributeID)
+{
+ bool isDone = false;
+ /// this is workaround for ModuleBase_WidgetEditor, used in SALOME mode. Sometimes key enter
+ /// event comes two times, so we should not start another internal edit operation
+ /// the Apply button becomes disabled becase the second additional internal feature is created
+ if (myIsInternalEditOperation)
+ return true;
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+
+ if (aFOperation && module()->sketchMgr()->isNestedSketchOperation(aFOperation)) {
+ aFOperation->setEditOperation(true/*, false*/);
+ createInternalFeature();
+
+ myIsInternalEditOperation = true;
+ updateAcceptAllAction();
+
+ isDone = true;
+ connect(aFOperation, SIGNAL(beforeCommitted()), this, SLOT(onBeforeStopped()));
+ connect(aFOperation, SIGNAL(beforeAborted()), this, SLOT(onBeforeStopped()));
+
+ // activate selection filters of the first widget in the viewer
+ onWidgetActivated();
+
+ // activate the last active widget in the Property Panel
+ if (!thePreviousAttributeID.empty()) {
+ ModuleBase_Operation* anEditOperation = module()->currentOperation();
+ if (anEditOperation) {
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ ModuleBase_ModelWidget* aPreviousAttributeWidget = 0;
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ for (int i = 0, aNb = aWidgets.size(); i < aNb && !aPreviousAttributeWidget; i++) {
+ if (aWidgets[i]->attributeID() == thePreviousAttributeID) {
+ /// workaround for the same attributes used in different stacked widgets(attribute types)
+ if (ModuleBase_ToolBox::isOffToolBoxParent(aWidgets[i]))
+ continue;
+ aPreviousAttributeWidget = aWidgets[i];
+ }
+ }
+ // If the current widget is a selector, do nothing, it processes the mouse press
+ if (aPreviousAttributeWidget) {
+ if (!aPreviousAttributeWidget->isViewerSelector()) {
+ aPreviousAttributeWidget->focusTo();
+ aPreviousAttributeWidget->selectContent();
+ }
+ else {
+ // in case of shape multi selector, the widget does not lose focus by filling
+ // like it is in shape selector. So, if enter is pressed, the multi shape selector
+ // control should be deactivated. The focus is moved to Apply button and there
+ // should not be active control visualized in property panel
+ if (aPreviousAttributeWidget == aPanel->activeWidget()) {
+ aPanel->activateWidget(NULL, false);
+ }
+ // if there is no the next widget to be automatically activated, the Ok button in property
+ // panel should accept the focus(example is parallel constraint on sketch lines)
+ QToolButton* anOkBtn = dynamic_cast<XGUI_PropertyPanel*>(aPanel)->findButton(PROP_PANEL_OK);
+ if (anOkBtn)
+ anOkBtn->setFocus(Qt::TabFocusReason);
+ }
+ }
+ }
+ }
+ }
+ if (isDone)
+ module()->sketchMgr()->clearClickedFlags();
+
+ return isDone;
+}
+
+void PartSet_SketcherReetntrantMgr::beforeStopInternalEdit()
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+ if (aFOperation) {
+ disconnect(aFOperation, SIGNAL(beforeCommitted()), this, SLOT(onBeforeStopped()));
+ disconnect(aFOperation, SIGNAL(beforeAborted()), this, SLOT(onBeforeStopped()));
+ }
+
+ deleteInternalFeature();
+}
+
+void PartSet_SketcherReetntrantMgr::restartOperation()
+{
+ if (myIsInternalEditOperation) {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(
+ myWorkshop->currentOperation());
+ if (aFOperation) {
+ myNoMoreWidgetsAttribute = "";
+ myIsFlagsBlocked = true;
+ module()->launchOperation(aFOperation->id());
+ myIsFlagsBlocked = false;
+ resetFlags();
+ // we should avoid processing of the signal about no more widgets attributes and
+ // do this after the restart operaion is finished if it was called
+ // onNoMoreWidgets depends on myIsFlagsBlocked and fill myNoMoreWidgetsAttribute
+ // if it should be called after restart
+ if (!myNoMoreWidgetsAttribute.empty()) {
+ onNoMoreWidgets(myNoMoreWidgetsAttribute);
+ myNoMoreWidgetsAttribute = "";
+ }
+ }
+ }
+}
+
+void PartSet_SketcherReetntrantMgr::createInternalFeature()
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (myWorkshop->currentOperation());
+
+ if (aFOperation && module()->sketchMgr()->isNestedSketchOperation(aFOperation)) {
+ FeaturePtr anOperationFeature = aFOperation->feature();
+
+ CompositeFeaturePtr aSketch = module()->sketchMgr()->activeSketch();
+ myInternalFeature = aSketch->addFeature(anOperationFeature->getKind());
+
+ bool isFeatureChanged = copyReetntrantAttributes(anOperationFeature, myInternalFeature,
+ aSketch, false);
+ XGUI_PropertyPanel* aPropertyPanel = dynamic_cast<XGUI_PropertyPanel*>
+ (aFOperation->propertyPanel());
+
+ myInternalWidget = new QWidget(aPropertyPanel->contentWidget()->pageWidget());
+ myInternalWidget->setVisible(false);
+
+ ModuleBase_PageWidget* anInternalPage = new ModuleBase_PageWidget(myInternalWidget);
+
+ QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
+ ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), myWorkshop);
+
+ aFactory.createWidget(anInternalPage);
+ QList<ModuleBase_ModelWidget*> aWidgets = aFactory.getModelWidgets();
+
+ foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
+ bool isStoreValue = !aFOperation->isEditOperation() &&
+ !aWidget->getDefaultValue().empty() &&
+ !aWidget->isComputedDefault();
+ aWidget->setFeature(myInternalFeature, isStoreValue);
+ if (!isStoreValue && isFeatureChanged)
+ aWidget->restoreValue();
+ }
+
+ ModuleBase_ModelWidget* aFirstWidget = ModuleBase_IPropertyPanel::findFirstAcceptingValueWidget
+ (aWidgets);
+ if (aFirstWidget)
+ myInternalActiveWidget = aFirstWidget;
+ }
+}
+
+void PartSet_SketcherReetntrantMgr::deleteInternalFeature()
+{
+ if (myInternalActiveWidget) {
+ ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(myInternalActiveWidget);
if (aWSelector)
- aWSelector->activateSelectionAndFilters(true);
+ aWSelector->activateSelectionAndFilters(false);
+ myInternalActiveWidget = 0;
}
+ delete myInternalWidget;
+ myInternalWidget = 0;
+
+ QObjectPtrList anObjects;
+ anObjects.append(myInternalFeature);
+ workshop()->deleteFeatures(anObjects);
+ myInternalFeature = FeaturePtr();
}
-bool PartSet_SketcherReetntrantMgr::isActiveMgr() const
+void PartSet_SketcherReetntrantMgr::resetFlags()
{
- PartSet_SketcherMgr* aSketcherMgr = module()->sketchMgr();
- ModuleBase_Operation* aCurrentOperation = myWorkshop->currentOperation();
- return PartSet_SketcherMgr::isSketchOperation(aCurrentOperation) ||
- PartSet_SketcherMgr::isNestedSketchOperation(aCurrentOperation);
+ if (!myIsFlagsBlocked) {
+ myIsInternalEditOperation = false;
+ updateAcceptAllAction();
+ myRestartingMode = RM_None;
+ }
}
-void PartSet_SketcherReetntrantMgr::breakOperationSequence()
+bool PartSet_SketcherReetntrantMgr::copyReetntrantAttributes(const FeaturePtr& theSourceFeature,
+ const FeaturePtr& theNewFeature,
+ const CompositeFeaturePtr& theSketch,
+ const bool isTemporary)
{
- myLastOperationId = "";
- myLastFeature = FeaturePtr();
- myRestartingMode = RM_None;
+ bool aChanged = false;
+ if (!theSourceFeature.get())
+ return aChanged;
+
+ std::string aFeatureKind = theSourceFeature->getKind();
+ if (aFeatureKind == SketchPlugin_Line::ID()) {
+ // Initialize new line with first point equal to end of previous
+ std::shared_ptr<ModelAPI_Data> aSFData = theSourceFeature->data();
+ std::shared_ptr<GeomDataAPI_Point2D> aSPoint = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ aSFData->attribute(SketchPlugin_Line::END_ID()));
+ std::shared_ptr<ModelAPI_Data> aNFData = theNewFeature->data();
+ std::shared_ptr<GeomDataAPI_Point2D> aNPoint = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ aNFData->attribute(SketchPlugin_Line::START_ID()));
+ aNPoint->setValue(aSPoint->x(), aSPoint->y());
+ PartSet_Tools::createConstraint(theSketch, aSPoint, aNPoint);
+
+ aNPoint = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ aSFData->attribute(SketchPlugin_Line::END_ID()));
+ aNPoint->setValue(aSPoint->x(), aSPoint->y());
+ }
+ else if (aFeatureKind == SketchPlugin_Circle::ID()) {
+ // set circle type
+ std::string aTypeAttributeId = SketchPlugin_Circle::CIRCLE_TYPE();
+ AttributeStringPtr aSourceFeatureTypeAttr = theSourceFeature->data()->string(aTypeAttributeId);
+ AttributeStringPtr aNewFeatureTypeAttr = theNewFeature->data()->string(aTypeAttributeId);
+ aNewFeatureTypeAttr->setValue(aSourceFeatureTypeAttr->value());
+ //ModuleBase_Tools::flushUpdated(theNewFeature);
+ aChanged = true;
+ }
+ else if (aFeatureKind == SketchPlugin_Arc::ID()) {
+ // set arc type
+ std::string aTypeAttributeId = SketchPlugin_Arc::ARC_TYPE();
+ AttributeStringPtr aSourceFeatureTypeAttr = theSourceFeature->data()->string(aTypeAttributeId);
+ AttributeStringPtr aNewFeatureTypeAttr = theNewFeature->data()->string(aTypeAttributeId);
+ aNewFeatureTypeAttr->setValue(aSourceFeatureTypeAttr->value());
+
+ // if the arc is tangent, set coincidence to end point of the previous arc
+ std::string anArcType = aSourceFeatureTypeAttr->value();
+ if (anArcType == SketchPlugin_Arc::ARC_TYPE_TANGENT()) {
+ // get the last point of the previuos arc feature(geom point 2d)
+ std::shared_ptr<ModelAPI_Data> aSData = theSourceFeature->data();
+ std::shared_ptr<GeomDataAPI_Point2D> aSPointAttr =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ aSData->attribute(SketchPlugin_Arc::END_ID()));
+ // get point attribute on the current feature
+ AttributeRefAttrPtr aTangentPointAttr = theNewFeature->data()->refattr(
+ SketchPlugin_Arc::TANGENT_POINT_ID());
+ aTangentPointAttr->setAttr(aSPointAttr);
+
+ std::shared_ptr<GeomDataAPI_Point2D> aNPointAttr =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theNewFeature->data()->attribute(SketchPlugin_Arc::END_ID()));
+ aNPointAttr->setValue(aSPointAttr->x(), aSPointAttr->y());
+
+ }
+ //ModuleBase_Tools::flushUpdated(theNewFeature);
+ aChanged = true;
+ }
+ return aChanged;
+}
+
+bool PartSet_SketcherReetntrantMgr::isTangentArc(ModuleBase_Operation* theOperation,
+ const CompositeFeaturePtr& /*theSketch*/) const
+{
+ bool aTangentArc = false;
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aFOperation && module()->sketchMgr()->isNestedSketchOperation(aFOperation)) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get() && aFeature->getKind() == SketchPlugin_Arc::ID()) {
+ AttributeStringPtr aTypeAttr = aFeature->data()->string(SketchPlugin_Arc::ARC_TYPE());
+ std::string anArcType = aTypeAttr.get() ? aTypeAttr->value() : "";
+ aTangentArc = anArcType == SketchPlugin_Arc::ARC_TYPE_TANGENT();
+ }
+ }
+ return aTangentArc;
+}
+
+void PartSet_SketcherReetntrantMgr::updateAcceptAllAction()
+{
+ CompositeFeaturePtr aSketch = module()->sketchMgr()->activeSketch();
+ if (aSketch.get())
+ workshop()->errorMgr()->updateAcceptAllAction(aSketch);
}
XGUI_Workshop* PartSet_SketcherReetntrantMgr::workshop() const
{
return dynamic_cast<PartSet_Module*>(myWorkshop->module());
}
+
