#include <SketchPlugin_Point.h>
#include <SketchPlugin_Arc.h>
#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_Ellipse.h>
+#include <SketchPlugin_EllipticArc.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <QMessageBox>
#include <QMainWindow>
+#include <set>
+
//#define DEBUG_DO_NOT_BY_ENTER
//#define DEBUG_SKETCHER_ENTITIES
//#define DEBUG_SKETCH_ENTITIES_ON_MOVE
: QObject(theModule), myModule(theModule), myIsEditLaunching(false), myIsDragging(false),
myDragDone(false), myIsMouseOverWindow(false),
myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
- myIsPopupMenuActive(false), myExternalPointsMgr(0)
+ myIsPopupMenuActive(false), myExternalPointsMgr(0), myNoDragMoving(false),
+ myIsSketchStarted(false)
{
ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
registerSelectionFilter(SF_SketchCirclePointFilter, new PartSet_CirclePointFilter(anIWorkshop));
registerSelectionFilter(SF_SketchPlaneFilter, new ModuleBase_ShapeInPlaneFilter());
+
+ Events_Loop::loop()->registerListener(this, Events_Loop::eventByName(EVENT_DOF_OBJECTS));
}
PartSet_SketcherMgr::~PartSet_SketcherMgr()
return;
#endif
- if (canChangeCursor(getCurrentOperation())) {
- QCursor* aCurrentCursor = QApplication::overrideCursor();
- if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
- QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
-#ifdef DEBUG_CURSOR
- qDebug("onEnterViewPort() : Qt::CrossCursor");
-#endif
- }
- }
+ // It is switched off because of
+ // Task #3067: 5.2.2 Drawing in the sketcher: change the mouse cursor arrow
+ // if (canChangeCursor(getCurrentOperation())) {
+ // QCursor* aCurrentCursor = QApplication::overrideCursor();
+ // if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
+ // QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
+ //#ifdef DEBUG_CURSOR
+ // qDebug("onEnterViewPort() : Qt::CrossCursor");
+ //#endif
+ // }
+ // }
if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
return;
return;
#endif
- if (canChangeCursor(getCurrentOperation())) {
- QApplication::restoreOverrideCursor();
-#ifdef DEBUG_CURSOR
- qDebug("onLeaveViewPort() : None");
-#endif
- }
+// if (canChangeCursor(getCurrentOperation())) {
+// QApplication::restoreOverrideCursor();
+//#ifdef DEBUG_CURSOR
+// qDebug("onLeaveViewPort() : None");
+//#endif
+// }
if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
return;
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = aWorkshop->viewer();
- if (!aViewer->canDragByMouse())
- return;
+ //if (!aViewer->canDragByMouse())
+ // return;
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
(getCurrentOperation());
if (!aFOperation)
return;
- if (aFOperation->isEditOperation()) {
+ bool isEditing = aFOperation->isEditOperation();
+ bool aCanDrag = aViewer->canDragByMouse();
+
+ //if (!aViewer->canDragByMouse() && isEditing) {
+ // // Do not edit by dragging
+ // return;
+ //}
+
+ if (isEditing) {
// If the current widget is a selector, do nothing, it processes the mouse press
ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
if(anActiveWidget && anActiveWidget->isViewerSelector()) {
if ((!isSketchOpe) && (!isSketcher))
return;
- bool isEditing = aFOperation->isEditOperation();
-
// Ignore creation sketch operation
if ((!isSketcher) && (!isEditing))
return;
- Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
- // Remember highlighted objects for editing
- ModuleBase_ISelection* aSelect = aWorkshop->selection();
-
bool aHasShift = (theEvent->modifiers() & Qt::ShiftModifier);
storeSelection(aHasShift ? ST_SelectAndHighlightType : ST_HighlightType, myCurrentSelection);
}
// Init flyout point for radius rotation
FeaturePtr aFeature = myCurrentSelection.begin().key();
-
get2dPoint(theWnd, theEvent, myCurrentPoint);
if (isSketcher) {
- myIsDragging = true;
- myDragDone = false;
-
+ if (aCanDrag) {
+ myIsDragging = true;
+ myDragDone = false;
+ }
myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
launchEditing();
if (aFeature.get() != NULL) {
/// Internal edit should not be stored as editing operation as the result will be a
/// creation operation, where previous selection should not be used(and will be cleared)
myIsEditLaunching = !myModule->sketchReentranceMgr()->isInternalEditActive();
- aFOperation->commit();
- myIsDragging = true;
- myDragDone = false;
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFOperation->feature());
+ bool isRelaunchEditing = true;
+ if (aSPFeature->isExternal()) {
+ foreach(FeaturePtr aF, myCurrentSelection.keys()) {
+ FeaturePtr aProducerFeature = PartSet_Tools::findRefsToMeFeature(aF,
+ aSPFeature->getKind());
+ if (aProducerFeature == aSPFeature) {
+ isRelaunchEditing = false;
+ break;
+ }
+ }
+ }
+ else
+ isRelaunchEditing = !myCurrentSelection.contains(aSPFeature);
+ if (isRelaunchEditing)
+ aFOperation->commit();
+
+ if (aCanDrag) {
+ myIsDragging = true;
+ myDragDone = false;
+ }
myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
- launchEditing();
+ if (isRelaunchEditing)
+ launchEditing();
myIsEditLaunching = aPrevLaunchingState;
if (aFeature.get() != NULL) {
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
void PartSet_SketcherMgr::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ ModuleBase_IViewer* aViewer = aWorkshop->viewer();
if (myIsDragging)
- aWorkshop->viewer()->enableDrawMode(myPreviousDrawModeEnabled);
+ aViewer->enableDrawMode(myPreviousDrawModeEnabled);
bool aWasDragging = myIsDragging;
myIsDragging = false;
- if (myModule->sketchReentranceMgr()->processMouseReleased(theWnd, theEvent))
+ if (myModule->sketchReentranceMgr()->processMouseReleased(theWnd, theEvent)) {
return;
-
+ }
// if mouse is pressed when it was over view and at release the mouse is out of view, do nothing
- if (!myIsMouseOverViewProcessed)
- return;
-
- ModuleBase_IViewer* aViewer = aWorkshop->viewer();
- if (!aViewer->canDragByMouse())
+ if (!myIsMouseOverViewProcessed) {
return;
- ModuleBase_Operation* aOp = getCurrentOperation();
+ }
+ //if (!aViewer->canDragByMouse())
+ // return;
+ ModuleBase_OperationFeature* aOp =
+ dynamic_cast<ModuleBase_OperationFeature*>(getCurrentOperation());
if (aOp) {
- if (isNestedSketchOperation(aOp)) {
- // Only for sketcher operations
- if (aWasDragging) {
- if (myDragDone) {
- /// the previous selection is lost by mouse release in the viewer(Select method), but
- /// it is still stored in myCurrentSelection. So, it is possible to restore selection
- /// It is important for drag(edit with mouse) of sketch entities.
- restoreSelection(myCurrentSelection);
- myCurrentSelection.clear();
+ bool aStartNoDragOperation = !aViewer->canDragByMouse() && aOp->isEditOperation();
+ if (aStartNoDragOperation || myNoDragMoving) {
+ // Process edit operation without dragging
+ if (myCurrentSelection.size() > 0)
+ myNoDragMoving = !myNoDragMoving;
+ else
+ myNoDragMoving = false;
+ if (myNoDragMoving)
+ return;
+ else {
+ restoreSelection(myCurrentSelection);
+ myCurrentSelection.clear();
+ }
+ }
+ else {
+ if (isNestedSketchOperation(aOp)) {
+ // Only for sketcher operations
+ if (aWasDragging) {
+ if (myDragDone) {
+ /// the previous selection is lost by mouse release in the viewer(Select method), but
+ /// it is still stored in myCurrentSelection. So, it is possible to restore selection
+ /// It is important for drag(edit with mouse) of sketch entities.
+ restoreSelection(myCurrentSelection);
+ myCurrentSelection.clear();
+ }
}
}
}
qDebug(QString("%1").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
}
#endif
-
if (myModule->sketchReentranceMgr()->processMouseMoved(theWnd, theEvent))
return;
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+
if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
#ifdef DRAGGING_DEBUG
QTime t;
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
- (getCurrentOperation());
+ (getCurrentOperation());
if (aFOperation) {
FeaturePtr aFeature = aFOperation->feature();
visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
}
}
+ aDisplayer->updateViewer();
#ifdef DRAGGING_DEBUG
cout << "Mouse move processing " << t.elapsed() << endl;
#endif
}
//myClickedPoint.clear();
- if (myIsDragging) {
+ if (myIsDragging || myNoDragMoving) {
// 1. the current selection is saved in the mouse press method in order to restore it after
// moving
// 2. the enable selection in the viewer should be temporary switched off in order to ignore
// mouse press signal in the viewer(it call Select for AIS context and the dragged objects are
// deselected). This flag should be restored in the slot, processed the mouse release signal.
-
ModuleBase_Operation* aCurrentOperation = getCurrentOperation();
if (!aCurrentOperation)
return;
if (isSketchOperation(aCurrentOperation))
return; // No edit operation activated
+#ifdef DRAGGING_DEBUG
+ QTime t;
+ t.start();
+#endif
+
Handle(V3d_View) aView = theWnd->v3dView();
gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
Point aMousePnt;
get2dPoint(theWnd, theEvent, aMousePnt);
std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition = std::shared_ptr<GeomAPI_Pnt2d>(
- new GeomAPI_Pnt2d(myCurrentPoint.myCurX, myCurrentPoint.myCurY));
+ new GeomAPI_Pnt2d(myCurrentPoint.myCurX, myCurrentPoint.myCurY));
std::shared_ptr<GeomAPI_Pnt2d> aCurrentPosition = std::shared_ptr<GeomAPI_Pnt2d>(
- new GeomAPI_Pnt2d(aMousePnt.myCurX, aMousePnt.myCurY));
+ new GeomAPI_Pnt2d(aMousePnt.myCurX, aMousePnt.myCurY));
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
// 3. the flag to disable the update viewer should be set in order to avoid blinking in the
// viewer happens by deselect/select the modified objects. The flag should be restored after
// the selection processing. The update viewer should be also called.
static Events_ID aMoveEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);
//static Events_ID aUpdateEvent = Events_Loop::eventByName(EVENT_OBJECT_UPDATED);
FeatureToSelectionMap::const_iterator anIt = myCurrentSelection.begin(),
- aLast = myCurrentSelection.end();
+ aLast = myCurrentSelection.end();
// 4. the features and attributes modification(move)
bool isModified = false;
for (; anIt != aLast; anIt++) {
// Process selection by attribute: the priority to the attribute
if (!anAttributes.empty()) {
std::set<AttributePtr>::const_iterator anAttIt = anAttributes.begin(),
- anAttLast = anAttributes.end();
+ anAttLast = anAttributes.end();
for (; anAttIt != anAttLast; anAttIt++) {
AttributePtr anAttr = *anAttIt;
if (anAttr.get() == NULL)
bool isImmutable = aPoint->setImmutable(true);
std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage = std::shared_ptr
- <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
+ <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
aMessage->setMovedAttribute(aPoint);
aMessage->setOriginalPosition(anOriginalPosition);
aMessage->setCurrentPosition(aCurrentPosition);
}
}
}
- } else {
+ }
+ else {
// Process selection by feature
std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSketchFeature) {
std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage = std::shared_ptr
- <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
+ <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
aMessage->setMovedObject(aFeature);
aMessage->setOriginalPosition(anOriginalPosition);
aMessage->setCurrentPosition(aCurrentPosition);
aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
aDisplayer->updateViewer();
+#ifdef DRAGGING_DEBUG
+ cout << "Mouse move processing " << t.elapsed() << endl;
+#endif
+
myDragDone = true;
myCurrentPoint = aMousePnt;
}
theModes.append(TopAbs_EDGE);
}
-Handle(AIS_InteractiveObject) PartSet_SketcherMgr::createPresentation(const ResultPtr& theResult)
+Handle(AIS_InteractiveObject) PartSet_SketcherMgr::createPresentation(const ObjectPtr& theObj)
{
Handle(AIS_InteractiveObject) aPrs;
- FeaturePtr aFeature = ModelAPI_Feature::feature(theResult);
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObj);
if (aFeature.get() && aFeature->getKind() == SketchPlugin_Sketch::ID()) {
- aPrs = new PartSet_ResultSketchPrs(theResult);
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObj);
+ if (aResult.get())
+ aPrs = new PartSet_ResultSketchPrs(aResult);
}
return aPrs;
}
return (theId == SketchPlugin_Line::ID()) ||
(theId == SketchPlugin_Point::ID()) ||
(theId == SketchPlugin_Arc::ID()) ||
- (theId == SketchPlugin_Circle::ID());
+ (theId == SketchPlugin_Circle::ID()) ||
+ (theId == SketchPlugin_Ellipse::ID()) ||
+ (theId == SketchPlugin_Projection::ID()) ||
+ (theId == SketchPlugin_IntersectionPoint::ID()) ||
+ (theId == SketchPlugin_EllipticArc::ID());
}
bool PartSet_SketcherMgr::isExternalFeature(const FeaturePtr& theFeature)
void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)
{
+ static Events_ID EVENT_ATTR = Events_Loop::loop()->eventByName(EVENT_VISUAL_ATTRIBUTES);
+ static Events_ID EVENT_DISP = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
+
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
(getCurrentOperation());
if (!aFOperation)
return;
+ myIsSketchStarted = true;
+ SketcherPrs_Tools::setPixelRatio(ModuleBase_Tools::currentPixelRatio());
+
myModule->onViewTransformed();
// Display all sketcher sub-Objects
myModule->overconstraintListener()->setActive(true);
// Display sketcher objects
QStringList anInfo;
- Events_ID EVENT_DISP = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
const ModelAPI_EventCreator* aECreator = ModelAPI_EventCreator::get();
aNumberOfSubs = myCurrentSketch->numberOfSubs();
for (int i = 0; i < aNumberOfSubs; i++) {
aECreator->sendUpdated(aFeature, EVENT_DISP);
else
aFeature->setDisplayed(true);
+ aECreator->sendUpdated(aFeature, EVENT_ATTR);
}
#ifdef DEBUG_SKETCHER_ENTITIES
QString anInfoStr = anInfo.join(";\t");
workshop()->selectionActivate()->updateSelectionFilters();
workshop()->selectionActivate()->updateSelectionModes();
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+ Events_Loop::loop()->flush(EVENT_DISP);
+ Events_Loop::loop()->flush(EVENT_ATTR);
myExternalPointsMgr = new PartSet_ExternalPointsMgr(myModule->workshop(), myCurrentSketch);
workshop()->viewer()->set2dMode(true);
+
+ PartSet_Fitter* aFitter = new PartSet_Fitter(this);
+ myModule->workshop()->viewer()->setFitter(aFitter);
}
void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)
{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
+ PartSet_Fitter* aFitter = (PartSet_Fitter*)myModule->workshop()->viewer()->fitter();
+ myModule->workshop()->viewer()->setFitter(0);
+ delete aFitter;
+
+ myIsSketchStarted = false;
+
myIsMouseOverWindow = false;
myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
}
onShowPoints(false);
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
-
DataPtr aData = myCurrentSketch->data();
if (!aData->isValid()) {
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
workshop()->viewer()->set2dMode(false);
}
-void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
-{
- if (canChangeCursor(theOperation) && myIsMouseOverWindow) {
- QCursor* aCurrentCursor = QApplication::overrideCursor();
- if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
- QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
-#ifdef DEBUG_CURSOR
- qDebug("startNestedSketch() : Qt::CrossCursor");
-#endif
- }
- }
-}
+//void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
+//{
+// if (canChangeCursor(theOperation) && myIsMouseOverWindow) {
+// QCursor* aCurrentCursor = QApplication::overrideCursor();
+// if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
+// QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
+//#ifdef DEBUG_CURSOR
+// qDebug("startNestedSketch() : Qt::CrossCursor");
+//#endif
+// }
+// }
+//}
void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOperation)
{
operationMgr()->onValidateOperation();
// when sketch nested operation is stopped the cursor should be restored unconditionally
//if (canChangeCursor(theOperation)) {
- QApplication::restoreOverrideCursor();
+ //QApplication::restoreOverrideCursor();
#ifdef DEBUG_CURSOR
qDebug("stopNestedSketch() : None");
#endif
}
}
-void PartSet_SketcherMgr::customizePresentation(const ObjectPtr& theObject)
-{
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
- (getCurrentOperation());
- if (aFOperation && (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
- isNestedSketchOperation(aFOperation)))
- SketcherPrs_Tools::sendExpressionShownEvent(myIsConstraintsShown[PartSet_Tools::Expressions]);
-
- // update entities selection priorities
- FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
- if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
- // update priority for feature
- updateSelectionPriority(aFeature, aFeature);
- // update priority for results of the feature
- std::list<ResultPtr> aResults = aFeature->results();
- std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLastIt = aResults.end();
- for (; anIt != aLastIt; anIt++)
- updateSelectionPriority(*anIt, aFeature);
- }
-}
+//void PartSet_SketcherMgr::customisePresentation(const ObjectPtr& theObject)
+//{
+// ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+// (getCurrentOperation());
+// if (aFOperation && (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
+// isNestedSketchOperation(aFOperation)))
+// SketcherPrs_Tools::sendExpressionShownEvent(myIsConstraintsShown[PartSet_Tools::Expressions]);
+//
+// // update entities selection priorities
+// FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+// if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
+// // update priority for feature
+// updateSelectionPriority(aFeature, aFeature);
+// // update priority for results of the feature
+// std::list<ResultPtr> aResults = aFeature->results();
+// std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLastIt = aResults.end();
+// for (; anIt != aLastIt; anIt++)
+// updateSelectionPriority(*anIt, aFeature);
+// }
+//}
ModuleBase_Operation* PartSet_SketcherMgr::getCurrentOperation() const
{
PartSet_Tools::ConstraintVisibleState aType = (PartSet_Tools::ConstraintVisibleState)theType;
updateBySketchParameters(aType, theState);
+ myModule->workshop()->viewer()->update();
}
void PartSet_SketcherMgr::updateBySketchParameters(
if (aPrevState != theState) {
/// call all sketch features redisplay, the expression state will be corrected in customize
/// of distance presentation
+ SketcherPrs_Tools::
+ sendExpressionShownEvent(myIsConstraintsShown[PartSet_Tools::Expressions]);
Events_ID anEventId = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
PartSet_Tools::sendSubFeaturesEvent(myCurrentSketch, anEventId);
}
if (aToUpdate)
aViewer->update();
}
+
+void PartSet_SketcherMgr::processEvent(const std::shared_ptr<Events_Message>& theMessage)
+{
+ if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOF_OBJECTS)) {
+ std::shared_ptr<ModelAPI_ObjectUpdatedMessage> anUpdateMsg =
+ std::dynamic_pointer_cast<ModelAPI_ObjectUpdatedMessage>(theMessage);
+ std::set<ObjectPtr> aObjects = anUpdateMsg->objects();
+ std::set<ObjectPtr>::const_iterator aIt;
+ QList<ModuleBase_ViewerPrsPtr> aPrsList;
+ for (aIt = aObjects.cbegin(); aIt != aObjects.cend(); aIt++) {
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(*aIt);
+ if (aFeature.get()) {
+ std::list<ResultPtr> aRes = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aRes.cbegin(); aIt != aRes.cend(); ++aIt) {
+ ModuleBase_ViewerPrsPtr aPrsPtr(new ModuleBase_ViewerPrs(*aIt));
+ aPrsList.append(aPrsPtr);
+ }
+ }
+ }
+ if (aPrsList.size() > 0) {
+ myModule->workshop()->setSelected(aPrsList);
+ }
+ }
+}
+
+bool isExternal(const ObjectPtr& theObject)
+{
+ AttributeSelectionPtr aAttr =
+ theObject->data()->selection(SketchPlugin_SketchEntity::EXTERNAL_ID());
+ if (aAttr)
+ return aAttr->context().get() != NULL && !aAttr->isInvalid();
+ return false;
+}
+
+bool isCopy(const ObjectPtr& theObject)
+{
+ AttributeBooleanPtr anAttr = theObject->data()->boolean(SketchPlugin_SketchEntity::COPY_ID());
+ if (anAttr.get())
+ return anAttr->value();
+ return false;
+}
+
+bool isIncludeToResult(const ObjectPtr& theObject)
+{
+ AttributeBooleanPtr anAttr;
+ std::set<AttributePtr> aRefsToMe = theObject->data()->refsToMe();
+ std::set<AttributePtr>::const_iterator aIt;
+ for (aIt = aRefsToMe.cbegin(); aIt != aRefsToMe.cend(); ++aIt) {
+ if ((*aIt)->id() == SketchPlugin_Projection::PROJECTED_FEATURE_ID()) {
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>((*aIt)->owner());
+ if (aFeature.get()) {
+ anAttr = aFeature->data()->boolean(SketchPlugin_Projection::INCLUDE_INTO_RESULT());
+ if (anAttr.get())
+ return anAttr->value();
+ }
+ }
+ }
+ return true;
+}
+
+//**************************************************************************************
+std::vector<int> PartSet_SketcherMgr::colorOfObject(const ObjectPtr& theObject,
+ const FeaturePtr& theFeature, bool isConstruction) const
+{
+ static const QStringList& aConstrIds = constraintsIdList();
+ PartSet_OverconstraintListener* aOCListener = myModule->overconstraintListener();
+ std::string aKind = theFeature->getKind();
+
+ if (isDistanceKind(aKind)) {
+ if (aOCListener->isConflictingObject(theObject))
+ return Config_PropManager::color("Visualization", "sketch_overconstraint_color");
+ return Config_PropManager::color("Visualization", "sketch_dimension_color");
+ }
+ if (isExternal(theFeature))
+ return Config_PropManager::color("Visualization", "sketch_external_color");
+ if (isConstruction)
+ return Config_PropManager::color("Visualization", "sketch_auxiliary_color");
+
+ if (aOCListener->isFullyConstrained()) {
+ return Config_PropManager::color("Visualization", "sketch_fully_constrained_color");
+ }
+ else if (aOCListener->isConflictingObject(theObject)) {
+ return Config_PropManager::color("Visualization", "sketch_overconstraint_color");
+ }
+ return Config_PropManager::color("Visualization", "sketch_entity_color");
+}
+
+//**************************************************************************************
+void PartSet_SketcherMgr::customizeSketchPresentation(const ObjectPtr& theObject,
+ const AISObjectPtr& thePrs) const
+{
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+
+ // set color from preferences
+ std::shared_ptr<ModelAPI_AttributeBoolean> anAuxiliaryAttr =
+ aFeature->data()->boolean(SketchPlugin_SketchEntity::AUXILIARY_ID());
+ bool isConstruction = anAuxiliaryAttr.get() != NULL && anAuxiliaryAttr->value();
+
+ std::vector<int> aColor = colorOfObject(theObject, aFeature, isConstruction);
+ if (!aColor.empty()) {
+ // The code below causes redisplay again
+ if (ModelAPI_Session::get()->isOperation()) {
+ AttributeIntArrayPtr aColorAttr = theObject->data()->intArray(ModelAPI_Result::COLOR_ID());
+ if (aColorAttr.get()) {
+ aColorAttr->setSize(3, false);
+ // Set the color attribute in order do not use default colors in the presentation object
+ for (int i = 0; i < 3; i++)
+ aColorAttr->setValue(i, aColor[i], false);
+ }
+ }
+ thePrs->setColor(aColor[0], aColor[1], aColor[2]);
+ }
+
+ int aShapeType = thePrs->getShapeType();
+ // a compound is processed like the edge because the
+ // arc feature uses the compound for presentable AIS
+ if (aShapeType != 6/*an edge*/ && aShapeType != 7/*a vertex*/ && aShapeType != 0/*compound*/)
+ return;
+
+ if (isExternal(aFeature)) {
+ thePrs->setWidth(1);
+ return;
+ }
+ std::string aKind = aFeature->getKind();
+ if (isDistanceKind(aKind))
+ return;
+
+ if (aShapeType == 6 || aShapeType == 0) { // if this is an edge or a compound
+ if (isConstruction) {
+ // Set axilliary line
+ thePrs->setWidth(SketchPlugin_SketchEntity::SKETCH_LINE_WIDTH_AUXILIARY());
+ thePrs->setLineStyle(SketchPlugin_SketchEntity::SKETCH_LINE_STYLE_AUXILIARY());
+ }
+ else {
+ int aWidth = Config_PropManager::integer("Visualization", "sketch_line_width");
+ thePrs->setWidth(aWidth);
+ thePrs->setLineStyle(SketchPlugin_SketchEntity::SKETCH_LINE_STYLE());
+ }
+ }
+ else if (aShapeType == 7) { // otherwise this is a vertex
+ // The width value do not have effect on the point presentation.
+ // It is defined in order to extend selection area of the object.
+ thePrs->setWidth(17);
+ // thePrs->setPointMarker(1, 1.); // Set point as a '+' symbol
+ }
+ if (isCopy(aFeature) && !isIncludeToResult(aFeature)) {
+ double aWidth = thePrs->width();
+ thePrs->setWidth(aWidth / 2.5);
+ }
+
+ double aDeflection = Config_PropManager::real("Visualization", "construction_deflection");
+ thePrs->setDeflection(aDeflection);
+}
+
+//*************************************************************************************
+void PartSet_Fitter::fitAll(Handle(V3d_View) theView)
+{
+ CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
+
+ ModuleBase_IWorkshop* aWorkshop = mySketchMgr->module()->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+
+ Bnd_Box aBndBox;
+ int aNumberOfSubs = aSketch->numberOfSubs();
+ double aXmin, aYmin, aZmin, aXmax, aYmax, aZmax;
+ for (int i = 0; i < aNumberOfSubs; i++) {
+ FeaturePtr aFeature = aSketch->subFeature(i);
+ if (aDisplayer->isVisible(aFeature)) {
+ AISObjectPtr aAisPtr = aDisplayer->getAISObject(aFeature);
+ Handle(AIS_InteractiveObject) aAisObj = aAisPtr->impl<Handle(AIS_InteractiveObject)>();
+ if (!aAisObj->IsInfinite()) {
+ Bnd_Box aBox;
+ aAisObj->BoundingBox(aBox);
+ aBndBox.Add(aBox);
+ }
+ }
+ else {
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ ResultPtr aRes;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ aRes = (*aIt);
+ if (aRes->isDisplayed()) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aRes);
+ if (aFeature.get()) {
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSPFeature.get()) {
+ bool isAxiliary =
+ aSPFeature->boolean(SketchPlugin_SketchEntity::AUXILIARY_ID())->value();
+ if (!(aSPFeature->isExternal() || isAxiliary)) {
+ GeomShapePtr aShape = aRes->shape();
+ aShape->computeSize(aXmin, aYmin, aZmin, aXmax, aYmax, aZmax);
+ Bnd_Box aBox;
+ aBox.Update(aXmin, aYmin, aZmin, aXmax, aYmax, aZmax);
+ aBndBox.Add(aBox);
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ if (aBndBox.IsVoid())
+ theView->FitAll();
+ else
+ theView->FitAll(aBndBox, 0.01);
+}
