-// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
-
-// File: PartSet_SketcherMgr.cpp
-// Created: 19 Dec 2014
-// Author: Vitaly SMETANNIKOV
+// Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or
+// email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+//
#include "PartSet_SketcherMgr.h"
-#include "PartSet_SketcherReetntrantMgr.h"
+#include "PartSet_SketcherReentrantMgr.h"
#include "PartSet_Module.h"
-#include "PartSet_WidgetPoint2d.h"
-#include "PartSet_WidgetPoint2dDistance.h"
+#include "PartSet_MouseProcessor.h"
#include "PartSet_Tools.h"
#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_WidgetEditor.h"
+#include "PartSet_ResultSketchPrs.h"
+#include "PartSet_ExternalPointsMgr.h"
+#include "PartSet_PreviewSketchPlane.h"
#include <XGUI_ModuleConnector.h>
#include <XGUI_Displayer.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ViewerProxy.h>
#include <XGUI_OperationMgr.h>
+#include <XGUI_ErrorMgr.h>
+#include <XGUI_Tools.h>
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_ISelection.h>
#include <ModuleBase_OperationFeature.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_WidgetEditor.h>
+#include <ModuleBase_ViewerPrs.h>
+#include <ModuleBase_Tools.h>
+#include <ModuleBase_ResultPrs.h>
#include <GeomDataAPI_Point2D.h>
#include <SketchPlugin_ConstraintEqual.h>
#include <SketchPlugin_ConstraintTangent.h>
#include <SketchPlugin_ConstraintCoincidence.h>
-#include <SketchPlugin_ConstraintFillet.h>
+#include <SketchPlugin_Fillet.h>
#include <SketchPlugin_ConstraintMirror.h>
#include <SketchPlugin_ConstraintAngle.h>
+#include <SketchPlugin_ConstraintCollinear.h>
+#include <SketchPlugin_ConstraintMiddle.h>
#include <SketchPlugin_MultiRotation.h>
#include <SketchPlugin_MultiTranslation.h>
+#include <SketchPlugin_IntersectionPoint.h>
+#include <SketchPlugin_Projection.h>
#include <SketcherPrs_Tools.h>
//#include <AIS_DimensionSelectionMode.hxx>
#include <AIS_Shape.hxx>
+#include <AIS_Dimension.hxx>
#include <ModelAPI_Events.h>
#include <ModelAPI_Session.h>
#include <ModelAPI_AttributeString.h>
+#include <ModelAPI_Validator.h>
+#include <ModelAPI_Tools.h>
+
#include <QMouseEvent>
#include <QApplication>
#include <QCursor>
+#include <QMessageBox>
+#include <QMainWindow>
//#define DEBUG_DO_NOT_BY_ENTER
+//#define DEBUG_SKETCHER_ENTITIES
+//#define DEBUG_SKETCH_ENTITIES_ON_MOVE
//#define DEBUG_CURSOR
-/// Returns list of unique objects by sum of objects from List1 and List2
-/*QList<ModuleBase_ViewerPrs> getSumList(const QList<ModuleBase_ViewerPrs>& theList1,
- const QList<ModuleBase_ViewerPrs>& theList2)
-{
- QList<ModuleBase_ViewerPrs> aRes;
- foreach (ModuleBase_ViewerPrs aPrs, theList1) {
- if (!aRes.contains(aPrs))
- aRes.append(aPrs);
- }
- foreach (ModuleBase_ViewerPrs aPrs, theList2) {
- if (!aRes.contains(aPrs))
- aRes.append(aPrs);
- }
- return aRes;
-}*/
-
-// Fills the list of features the list of selected presentations.
-// \param theList a list of selected presentations
-// \param theSketch a sketch to project a vertex shape of a presentation to the plane
-// and find the corresponded attribute
-// \param theFeatureList an output list of features
-void fillFeatureList(const QList<ModuleBase_ViewerPrs>& theList,
- const FeaturePtr theSketch,
- QList<FeaturePtr>& theFeatureList)
-{
- QList<ModuleBase_ViewerPrs> aRes;
-
- QList<ModuleBase_ViewerPrs>::const_iterator anIt = theList.begin(),
- aLast = theList.end();
- for (; anIt != aLast; anIt++)
- {
- ModuleBase_ViewerPrs aPrs = *anIt;
- FeaturePtr aFeature = ModelAPI_Feature::feature(aPrs.object());
- if (aFeature.get() && !theFeatureList.contains(aFeature))
- theFeatureList.append(aFeature);
- }
-}
-
/// Fills attribute and result lists by the selected owner. In case if the attribute is found,
-/// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge, put the function
-/// result as is to the list of results.
+/// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge,
+/// put the function result as is to the list of results.
/// \param theOwner a viewer selected owner
/// \param theFeature a feature, where the attribute is searched
/// \param theSketch a current sketch
void getAttributesOrResults(const Handle(SelectMgr_EntityOwner)& theOwner,
const FeaturePtr& theFeature, const FeaturePtr& theSketch,
const ResultPtr& theResult,
- std::set<AttributePtr>& aSelectedAttributes,
- std::set<ResultPtr>& aSelectedResults)
+ std::set<AttributePtr>& theSelectedAttributes,
+ std::set<ResultPtr>& theSelectedResults,
+ TopTools_MapOfShape& theShapes)
{
Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(theOwner);
if (aBRepOwner.IsNull())
aBRepOwner->Selectable());
if (aBRepOwner->HasShape()) {
const TopoDS_Shape& aShape = aBRepOwner->Shape();
+ theShapes.Add(aShape);
TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
if (aShapeType == TopAbs_VERTEX) {
AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature,
aShape, theSketch);
if (aPntAttr.get() != NULL)
- aSelectedAttributes.insert(aPntAttr);
+ theSelectedAttributes.insert(aPntAttr);
}
else if (aShapeType == TopAbs_EDGE &&
- aSelectedResults.find(theResult) == aSelectedResults.end()) {
- aSelectedResults.insert(theResult);
+ theSelectedResults.find(theResult) == theSelectedResults.end()) {
+ theSelectedResults.insert(theResult);
}
}
}
PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)
- : QObject(theModule), myModule(theModule), myIsDragging(false), myDragDone(false),
- myIsMouseOverWindow(false),
+ : QObject(theModule), myModule(theModule), myIsEditLaunching(false), myIsDragging(false),
+ myDragDone(false), myIsMouseOverWindow(false),
myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
- myIsPopupMenuActive(false), myIsConstraintsShown(true)
+ myIsPopupMenuActive(false), myExternalPointsMgr(0)
{
ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
connect(aWorkshop, SIGNAL(applicationStarted()), this, SLOT(onApplicationStarted()));
+
+ myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
+ myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
+ myIsConstraintsShown[PartSet_Tools::Expressions] = false;
+
+ mySketchPlane = new PartSet_PreviewSketchPlane();
}
PartSet_SketcherMgr::~PartSet_SketcherMgr()
}
}
- if (!isNestedCreateOperation(getCurrentOperation()))
+ if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
return;
operationMgr()->onValidateOperation();
{
myIsMouseOverViewProcessed = false;
myIsMouseOverWindow = false;
- // it is important to validate operation here only if sketch entity create operation is active
- // because at this operation we reacts to the mouse leave/enter view port
- //operationMgr()->onValidateOperation();
#ifdef DEBUG_DO_NOT_BY_ENTER
return;
#endif
}
- if (!isNestedCreateOperation(getCurrentOperation()))
+ if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
return;
// the method should be performed if the popup menu is called,
if (myIsPopupMenuActive)
return;
+ // it is important to validate operation here only if sketch entity create operation is active
+ // because at this operation we reacts to the mouse leave/enter view port
operationMgr()->onValidateOperation();
// 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation
aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
}
+/*
+//Temporary commented as we do not modify values in property panel
void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()
{
- if (!isNestedEditOperation(getCurrentOperation()) ||
+ if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||
myModule->sketchReentranceMgr()->isInternalEditActive())
return;
// it is necessary to save current selection in order to restore it after the values are modifed
- storeSelection();
+ storeSelection(ST_SelectAndHighlightType);
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
void PartSet_SketcherMgr::onAfterValuesChangedInPropertyPanel()
{
- if (!isNestedEditOperation(getCurrentOperation()) ||
- myModule->sketchReentranceMgr()->isInternalEditActive())
+ if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||
+ myModule->sketchReentranceMgr()->isInternalEditActive()) {
+ myModule->sketchReentranceMgr()->updateInternalEditActiveState();
return;
- // it is necessary to restore current selection in order to restore it after the values are modified
+ }
+ // it is necessary to restore current selection in order to restore it after values are modified
restoreSelection();
myCurrentSelection.clear();
- // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
+ // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
// viewer happens by deselect/select the modified objects. The flag should be restored after
// the selection processing. The update viewer should be also called.
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
aDisplayer->enableUpdateViewer(myPreviousUpdateViewerEnabled);
aDisplayer->updateViewer();
}
+*/
void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
+ // Clear dragging mode
+ myIsDragging = false;
+
if (myModule->sketchReentranceMgr()->processMousePressed(theWnd, theEvent))
return;
-
//get2dPoint(theWnd, theEvent, myClickedPoint);
-
if (!(theEvent->buttons() & Qt::LeftButton))
return;
- // Clear dragging mode
- myIsDragging = false;
-
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = aWorkshop->viewer();
if (!aViewer->canDragByMouse())
return;
Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
- if (!aContext.IsNull()) {
- // MoveTo in order to highlight current object
- aContext->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
- }
// Remember highlighted objects for editing
ModuleBase_ISelection* aSelect = aWorkshop->selection();
bool aHasShift = (theEvent->modifiers() & Qt::ShiftModifier);
- storeSelection(!aHasShift);
+ storeSelection(aHasShift ? ST_SelectAndHighlightType : ST_HighlightType, myCurrentSelection);
if (myCurrentSelection.empty()) {
if (isSketchOpe && (!isSketcher))
// Init flyout point for radius rotation
FeaturePtr aFeature = myCurrentSelection.begin().key();
+ get2dPoint(theWnd, theEvent, myCurrentPoint);
if (isSketcher) {
myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurrentPoint);
myDragDone = false;
- // TODO: Has to be uncommented when SALOME patch on draw mode become avialable
+
myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
launchEditing();
if (aFeature.get() != NULL) {
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature.get() && aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID()) {
+ if (aSPFeature.get() &&
+ (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
+ aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
DataPtr aData = aSPFeature->data();
AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
- std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
+ std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
}
}
} else if (isSketchOpe && isEditing) {
// If selected another object commit current result
+ bool aPrevLaunchingState = myIsEditLaunching;
+ /// store editing state for Edit operation in order to do not clear highlight by restart
+ /// of edit operation.
+ /// Internal edit should not be stored as editing operation as the result will be a
+ /// creation operation, where previous selection should not be used(and will be cleared)
+ myIsEditLaunching = !myModule->sketchReentranceMgr()->isInternalEditActive();
aFOperation->commit();
myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurrentPoint);
myDragDone = false;
- // TODO: Has to be uncommented when SALOME patch on draw mode become avialable
- myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
- // This is necessary in order to finalize previous operation
- QApplication::processEvents();
+ myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
launchEditing();
+ myIsEditLaunching = aPrevLaunchingState;
+ if (aFeature.get() != NULL) {
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSPFeature.get() &&
+ (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
+ aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
+ DataPtr aData = aSPFeature->data();
+ AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
+ std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
+ aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
+ }
+ }
}
}
}
void PartSet_SketcherMgr::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
+ bool aWasDragging = myIsDragging;
+ myIsDragging = false;
+
if (myModule->sketchReentranceMgr()->processMouseReleased(theWnd, theEvent))
return;
+ // if mouse is pressed when it was over view and at release the mouse is out of view, do nothing
+ if (!myIsMouseOverViewProcessed)
+ return;
+
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = aWorkshop->viewer();
if (!aViewer->canDragByMouse())
ModuleBase_Operation* aOp = getCurrentOperation();
if (aOp) {
if (isNestedSketchOperation(aOp)) {
- //get2dPoint(theWnd, theEvent, myClickedPoint);
-
// Only for sketcher operations
- if (myIsDragging) {
+ if (aWasDragging) {
if (myDragDone) {
- //aOp->commit();
+ /// the previous selection is lost by mouse release in the viewer(Select method), but
+ /// it is still stored in myCurrentSelection. So, it is possible to restore selection
+ /// It is important for drag(edit with mouse) of sketch entities.
+ restoreSelection(myCurrentSelection);
myCurrentSelection.clear();
- /*Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
- if (!aContext.IsNull()) {
- // Reselect edited object
- aContext->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
- if (theEvent->modifiers() & Qt::ShiftModifier)
- aContext->ShiftSelect();
- else
- aContext->Select();
- */
}
}
}
}
- // TODO: Has to be uncommented when SALOME patch on draw mode become avialable
+
aWorkshop->viewer()->enableDrawMode(myPreviousDrawModeEnabled);
- //aWorkshop->viewer()->enableSelection(myPreviousDrawModeEnabled);
- myIsDragging = false;
+
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
+ if (aProcessor)
+ aProcessor->mouseReleased(theWnd, theEvent);
}
void PartSet_SketcherMgr::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
+#ifdef DEBUG_SKETCH_ENTITIES_ON_MOVE
+ CompositeFeaturePtr aSketch = activeSketch();
+ if (aSketch.get()) {
+ std::cout << "mouse move SKETCH FEATURES [" << aSketch->numberOfSubs() << "]:" << std::endl;
+ QStringList anInfo;
+ for (int i = 0, aNbSubs = aSketch->numberOfSubs(); i < aNbSubs; i++) {
+ //std::cout << getFeatureInfo(aSketch->subFeature(i), false) << std::endl;
+ anInfo.append(ModuleBase_Tools::objectInfo(aSketch->subFeature(i)));
+ }
+ QString anInfoStr = anInfo.join("\n");
+ qDebug(QString("%1").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
+ }
+#endif
+
if (myModule->sketchReentranceMgr()->processMouseMoved(theWnd, theEvent))
return;
- if (isNestedCreateOperation(getCurrentOperation()) && !myIsMouseOverViewProcessed) {
- myIsMouseOverViewProcessed = true;
+ if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
// 1. perform the widget mouse move functionality and display the presentation
// the mouse move should be processed in the widget, if it can in order to visualize correct
// presentation. These widgets correct the feature attribute according to the mouse position
- ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
- PartSet_WidgetPoint2D* aPoint2DWdg = dynamic_cast<PartSet_WidgetPoint2D*>(anActiveWidget);
- if (aPoint2DWdg) {
- aPoint2DWdg->onMouseMove(theWnd, theEvent);
- }
- PartSet_WidgetPoint2dDistance* aDistanceWdg = dynamic_cast<PartSet_WidgetPoint2dDistance*>
- (anActiveWidget);
- if (aDistanceWdg) {
- aDistanceWdg->onMouseMove(theWnd, theEvent);
- }
- // the feature is to be erased here, but it is correct to call canDisplayObject because
- // there can be additional check (e.g. editor widget in distance constraint)
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
- (getCurrentOperation());
- if (aFOperation) {
- FeaturePtr aFeature = aFOperation->feature();
- visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ ModuleBase_ModelWidget* anActiveWidget = myModule->activeWidget();
+ PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
+ if (aProcessor)
+ aProcessor->mouseMoved(theWnd, theEvent);
+ if (!myIsMouseOverViewProcessed) {
+ myIsMouseOverViewProcessed = true;
+
+ // the feature is to be erased here, but it is correct to call canDisplayObject because
+ // there can be additional check (e.g. editor widget in distance constraint)
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
}
}
-
//myClickedPoint.clear();
if (myIsDragging) {
- // 1. the current selection is saved in the mouse press method in order to restore it after moving
+ // 1. the current selection is saved in the mouse press method in order to restore it after
+ // moving
// 2. the enable selection in the viewer should be temporary switched off in order to ignore
// mouse press signal in the viewer(it call Select for AIS context and the dragged objects are
// deselected). This flag should be restored in the slot, processed the mouse release signal.
- // TODO: Has to be commented out when SALOME patch on draw mode become avialable
- //ModuleBase_IViewer* aViewer = myModule->workshop()->viewer();
- //aViewer->enableSelection(false);
-
ModuleBase_Operation* aCurrentOperation = getCurrentOperation();
if (!aCurrentOperation)
return;
Handle(V3d_View) aView = theWnd->v3dView();
gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
- double aX, aY;
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, aY);
- double dX = aX - myCurrentPoint.myCurX;
- double dY = aY - myCurrentPoint.myCurY;
+ Point aMousePnt;
+ get2dPoint(theWnd, theEvent, aMousePnt);
+
+ std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition = std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(myCurrentPoint.myCurX, myCurrentPoint.myCurY));
+ std::shared_ptr<GeomAPI_Pnt2d> aCurrentPosition = std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(aMousePnt.myCurX, aMousePnt.myCurY));
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
- // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
+ // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
// viewer happens by deselect/select the modified objects. The flag should be restored after
// the selection processing. The update viewer should be also called.
bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
for (; anIt != aLast; anIt++) {
FeaturePtr aFeature = anIt.key();
- std::set<AttributePtr> anAttributes = anIt.value().first;
+ std::set<AttributePtr> anAttributes = anIt.value().myAttributes;
// Process selection by attribute: the priority to the attribute
if (!anAttributes.empty()) {
std::set<AttributePtr>::const_iterator anAttIt = anAttributes.begin(),
std::string aAttrId = anAttr->id();
DataPtr aData = aFeature->data();
if (aData->isValid()) {
- std::shared_ptr<GeomDataAPI_Point2D> aPoint =
+ std::shared_ptr<GeomDataAPI_Point2D> aPoint =
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(aAttrId));
if (aPoint.get() != NULL) {
bool isImmutable = aPoint->setImmutable(true);
- aPoint->move(dX, dY);
+
+ std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage = std::shared_ptr
+ <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
+ aMessage->setMovedAttribute(aPoint);
+ aMessage->setOriginalPosition(anOriginalPosition);
+ aMessage->setCurrentPosition(aCurrentPosition);
+ Events_Loop::loop()->send(aMessage);
+
isModified = true;
- ModelAPI_EventCreator::get()->sendUpdated(aFeature, aMoveEvent);
aPoint->setImmutable(isImmutable);
}
}
std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSketchFeature) {
- aSketchFeature->move(dX, dY);
+ std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage = std::shared_ptr
+ <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
+ aMessage->setMovedObject(aFeature);
+ aMessage->setOriginalPosition(anOriginalPosition);
+ aMessage->setCurrentPosition(aCurrentPosition);
+ Events_Loop::loop()->send(aMessage);
isModified = true;
- ModelAPI_EventCreator::get()->sendUpdated(aSketchFeature, aMoveEvent);
}
}
}
// were changed here
if (isModified) {
aCurrentOperation->onValuesChanged();
+ Events_Loop::loop()->flush(aMoveEvent); // up all move events - to be processed in the solver
}
- Events_Loop::loop()->flush(aMoveEvent); // up all move events - to be processed in the solver
//Events_Loop::loop()->flush(aUpdateEvent); // up update events - to redisplay presentations
// 5. it is necessary to save current selection in order to restore it after the features moving
- restoreSelection();
+ restoreSelection(myCurrentSelection);
// 6. restore the update viewer flag and call this update
aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
aDisplayer->updateViewer();
myDragDone = true;
- myCurrentPoint.setValue(aX, aY);
+ myCurrentPoint = aMousePnt;
}
}
QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
// Find corresponded widget to activate value editing
foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- if (aWgt->attributeID() == "ConstraintValue") {
+ if (aWgt->attributeID() == SketchPlugin_Constraint::VALUE() ||
+ aWgt->attributeID() == SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()) {
PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
if (anEditor)
anEditor->showPopupEditor();
ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
- PartSet_SketcherReetntrantMgr* aReentranceMgr = myModule->sketchReentranceMgr();
+ PartSet_SketcherReentrantMgr* aReentranceMgr = myModule->sketchReentranceMgr();
XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
if (aPropertyPanel) {
myIsPopupMenuActive = false;
}
-void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
+void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
Point& thePoint)
{
Handle(V3d_View) aView = theWnd->v3dView();
{
if (!myCurrentSelection.empty()) {
FeaturePtr aFeature = myCurrentSelection.begin().key();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSPFeature) {
- myModule->editFeature(aSPFeature);
+ if (!aSPFeature->isExternal())
+ myModule->editFeature(aSPFeature);
+ else {
+ FeaturePtr aProjectionFeature = PartSet_Tools::findRefsToMeFeature(aFeature,
+ SketchPlugin_Projection::ID());
+ if (aProjectionFeature.get())
+ myModule->editFeature(aProjectionFeature);
+ }
}
}
}
QString PartSet_SketcherMgr::getFeatureError(const FeaturePtr& theFeature)
{
- QString anError = "";
+ QString anError;
if (!theFeature.get() || !theFeature->data()->isValid())
return anError;
CompositeFeaturePtr aSketch = activeSketch();
if (aSketch.get() && aSketch == theFeature) {
- AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());
- anError = aAttributeString->value().c_str();
+ std::string aSolverError = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR())->value();
+ anError = ModuleBase_Tools::translate(aSketch->getKind(), aSolverError);
}
return anError;
}
myCurrentPoint.clear();
}
-const QStringList& PartSet_SketcherMgr::sketchOperationIdList()
+const QStringList& PartSet_SketcherMgr::replicationsIdList()
{
- static QStringList aIds;
- if (aIds.size() == 0) {
- aIds << SketchPlugin_Line::ID().c_str();
- aIds << SketchPlugin_Point::ID().c_str();
- aIds << SketchPlugin_Arc::ID().c_str();
- aIds << SketchPlugin_Circle::ID().c_str();
- aIds << SketchPlugin_ConstraintFillet::ID().c_str();
- aIds.append(constraintsIdList());
+ static QStringList aReplicationIds;
+ if (aReplicationIds.size() == 0) {
+ aReplicationIds << SketchPlugin_ConstraintMirror::ID().c_str();
+ aReplicationIds << SketchPlugin_MultiRotation::ID().c_str();
+ aReplicationIds << SketchPlugin_MultiTranslation::ID().c_str();
}
- return aIds;
+ return aReplicationIds;
}
const QStringList& PartSet_SketcherMgr::constraintsIdList()
{
- static QStringList aIds;
- if (aIds.size() == 0) {
- aIds << SketchPlugin_ConstraintLength::ID().c_str();
- aIds << SketchPlugin_ConstraintDistance::ID().c_str();
- aIds << SketchPlugin_ConstraintRigid::ID().c_str();
- aIds << SketchPlugin_ConstraintRadius::ID().c_str();
- aIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
- aIds << SketchPlugin_ConstraintParallel::ID().c_str();
- aIds << SketchPlugin_ConstraintHorizontal::ID().c_str();
- aIds << SketchPlugin_ConstraintVertical::ID().c_str();
- aIds << SketchPlugin_ConstraintEqual::ID().c_str();
- aIds << SketchPlugin_ConstraintTangent::ID().c_str();
- aIds << SketchPlugin_ConstraintCoincidence::ID().c_str();
- aIds << SketchPlugin_ConstraintMirror::ID().c_str();
- aIds << SketchPlugin_ConstraintAngle::ID().c_str();
- aIds << SketchPlugin_MultiRotation::ID().c_str();
- aIds << SketchPlugin_MultiTranslation::ID().c_str();
+ static QStringList aConstraintIds;
+ if (aConstraintIds.size() == 0) {
+ aConstraintIds << SketchPlugin_ConstraintLength::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintDistance::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintRigid::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintRadius::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintParallel::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintHorizontal::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintVertical::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintEqual::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintTangent::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintCoincidence::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintAngle::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintCollinear::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintMiddle::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintMirror::ID().c_str();
+ aConstraintIds << SketchPlugin_MultiTranslation::ID().c_str();
+ aConstraintIds << SketchPlugin_MultiRotation::ID().c_str();
}
- return aIds;
+ return aConstraintIds;
}
void PartSet_SketcherMgr::sketchSelectionModes(QIntList& theModes)
theModes.append(TopAbs_EDGE);
}
+Handle(AIS_InteractiveObject) PartSet_SketcherMgr::createPresentation(const ResultPtr& theResult)
+{
+ Handle(AIS_InteractiveObject) aPrs;
+
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theResult);
+ if (aFeature.get() && aFeature->getKind() == SketchPlugin_Sketch::ID()) {
+ aPrs = new PartSet_ResultSketchPrs(theResult);
+ }
+ return aPrs;
+}
+
bool PartSet_SketcherMgr::isSketchOperation(ModuleBase_Operation* theOperation)
{
return theOperation && theOperation->id().toStdString() == SketchPlugin_Sketch::ID();
}
-bool PartSet_SketcherMgr::isNestedSketchOperation(ModuleBase_Operation* theOperation)
+bool PartSet_SketcherMgr::isNestedSketchOperation(ModuleBase_Operation* theOperation) const
+{
+ bool aNestedSketch = false;
+
+ FeaturePtr anActiveSketch = activeSketch();
+ if (anActiveSketch.get() && theOperation) {
+ ModuleBase_Operation* aSketchOperation = operationMgr()->findOperation(
+ anActiveSketch->getKind().c_str());
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aSketchOperation && aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get()) {
+ QStringList aGrantedOpIds = aSketchOperation->grantedOperationIds();
+ aNestedSketch = aGrantedOpIds.contains(aFeature->getKind().c_str());
+ }
+ }
+ }
+ return aNestedSketch;
+}
+
+bool PartSet_SketcherMgr::isNestedSketchFeature(const QString& theFeatureKind) const
{
- return theOperation &&
- PartSet_SketcherMgr::sketchOperationIdList().contains(theOperation->id());
+ bool aNestedSketch = false;
+
+ FeaturePtr anActiveSketch = activeSketch();
+ if (anActiveSketch.get()) {
+ ModuleBase_Operation* aSketchOperation = operationMgr()->findOperation(
+ anActiveSketch->getKind().c_str());
+ if (aSketchOperation) {
+ QStringList aGrantedOpIds = aSketchOperation->grantedOperationIds();
+ aNestedSketch = aGrantedOpIds.contains(theFeatureKind);
+ }
+ }
+ return aNestedSketch;
}
-bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation)
+bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation,
+ const CompositeFeaturePtr& theSketch) const
{
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
(theOperation);
- return aFOperation && !aFOperation->isEditOperation() && isNestedSketchOperation(aFOperation);
+ return aFOperation && !aFOperation->isEditOperation() &&
+ isNestedSketchOperation(aFOperation);
}
-bool PartSet_SketcherMgr::isNestedEditOperation(ModuleBase_Operation* theOperation)
+bool PartSet_SketcherMgr::isNestedEditOperation(ModuleBase_Operation* theOperation,
+ const CompositeFeaturePtr& theSketch) const
{
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
(theOperation);
- return aFOperation && aFOperation->isEditOperation() && isNestedSketchOperation(aFOperation);
+ return aFOperation && aFOperation->isEditOperation() &&
+ isNestedSketchOperation(aFOperation);
}
bool PartSet_SketcherMgr::isEntity(const std::string& theId)
(theId == SketchPlugin_Circle::ID());
}
+bool PartSet_SketcherMgr::isExternalFeature(const FeaturePtr& theFeature)
+{
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(theFeature);
+ return aSPFeature.get() && aSPFeature->isExternal();
+}
+
bool PartSet_SketcherMgr::isDistanceOperation(ModuleBase_Operation* theOperation)
{
- std::string aId = theOperation ? theOperation->id().toStdString() : "";
+ std::string anId = theOperation ? theOperation->id().toStdString() : "";
- return (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID()) ||
- (aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintAngle::ID());
+ return isDistanceKind(anId);
+}
+
+bool PartSet_SketcherMgr::isDistanceKind(std::string& theKind)
+{
+ return (theKind == SketchPlugin_ConstraintLength::ID()) ||
+ (theKind == SketchPlugin_ConstraintDistance::ID()) ||
+ (theKind == SketchPlugin_ConstraintRadius::ID()) ||
+ (theKind == SketchPlugin_ConstraintAngle::ID());
}
void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)
// Display all sketcher sub-Objects
myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFOperation->feature());
+ mySketchPlane->createSketchPlane(myCurrentSketch, myModule->workshop());
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
- aConnector->workshop()->displayer()->activateTrihedron(true);
// Hide sketcher result
std::list<ResultPtr> aResults = myCurrentSketch->results();
}
myCurrentSketch->setDisplayed(false);
+ // Remove invalid sketch entities
+ std::set<FeaturePtr> anInvalidFeatures;
+ ModelAPI_ValidatorsFactory* aFactory = ModelAPI_Session::get()->validators();
+ for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ if (aFeature.get()) {
+ if (!aFactory->validate(aFeature))
+ anInvalidFeatures.insert(aFeature);
+ }
+ }
+ if (!anInvalidFeatures.empty()) {
+ std::map<FeaturePtr, std::set<FeaturePtr> > aReferences;
+ ModelAPI_Tools::findAllReferences(anInvalidFeatures, aReferences, false);
+
+ std::set<FeaturePtr>::const_iterator anIt = anInvalidFeatures.begin(),
+ aLast = anInvalidFeatures.end();
+ // separate features to references to parameter features and references to others
+ QStringList anInvalidFeatureNames;
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aFeature = *anIt;
+ if (aFeature.get())
+ anInvalidFeatureNames.append(aFeature->name().c_str());
+ }
+ std::string aPrefixInfo = QString("Invalid features of the sketch will be deleted: %1.\n\n").
+ arg(anInvalidFeatureNames.join(", ")).toStdString().c_str();
+ std::set<FeaturePtr> aFeatureRefsToDelete;
+ if (ModuleBase_Tools::askToDelete(anInvalidFeatures, aReferences, aConnector->desktop(),
+ aFeatureRefsToDelete, aPrefixInfo)) {
+ if (!aFeatureRefsToDelete.empty())
+ anInvalidFeatures.insert(aFeatureRefsToDelete.begin(), aFeatureRefsToDelete.end());
+ ModelAPI_Tools::removeFeatures(anInvalidFeatures, true);
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
+ // TODO: call the next method in the XGUI_OperationMgr::onOperationStarted().
+ workshop()->errorMgr()->updateAcceptAllAction(myCurrentSketch);
+ }
+ }
+
+ // update state of overconstraint listener should be done before sketch features/results
+ // display (as the display will ask custom color from the listener)
+ myModule->overconstraintListener()->setActive(true);
// Display sketcher objects
+ QStringList anInfo;
+ Events_ID EVENT_DISP = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
+ const ModelAPI_EventCreator* aECreator = ModelAPI_EventCreator::get();
for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+#ifdef DEBUG_SKETCHER_ENTITIES
+ anInfo.append(ModuleBase_Tools::objectInfo(aFeature));
+#endif
std::list<ResultPtr> aResults = aFeature->results();
std::list<ResultPtr>::const_iterator aIt;
for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- (*aIt)->setDisplayed(true);
+ if ((*aIt)->isDisplayed())
+ // Display object if it was created outside of GUI
+ aECreator->sendUpdated((*aIt), EVENT_DISP);
+ else
+ (*aIt)->setDisplayed(true);
}
- aFeature->setDisplayed(true);
+ if (aFeature->isDisplayed())
+ aECreator->sendUpdated(aFeature, EVENT_DISP);
+ else
+ aFeature->setDisplayed(true);
+ }
+#ifdef DEBUG_SKETCHER_ENTITIES
+ QString anInfoStr = anInfo.join(";\t");
+ qDebug(QString("startSketch: %1, %2").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
+#endif
+
+ if(myCirclePointFilter.IsNull()) {
+ myCirclePointFilter = new PartSet_CirclePointFilter(myModule->workshop());
}
- if (myPlaneFilter.IsNull())
+ myModule->workshop()->viewer()->addSelectionFilter(myCirclePointFilter);
+
+ if (myPlaneFilter.IsNull())
myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);
-
bool aHasPlane = false;
std::shared_ptr<GeomAPI_Pln> aPln;
- if (aFOperation->isEditOperation()) {
- // If it is editing of sketch then it means that plane is already defined
- aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
- if (aPln.get())
- aHasPlane = true;
- }
+ aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
myPlaneFilter->setPlane(aPln);
Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
- // all sketch objects should be activated in the sketch selection modes by edit operation start
- // in case of creation operation, there is an active widget, which activates own selection mode
- if (aFOperation->isEditOperation() && aHasPlane)
+ // all displayed objects should be activated in current selection modes according to switched
+ // plane filter
+ if (aPln.get())
aConnector->activateModuleSelectionModes();
+
+ myExternalPointsMgr = new PartSet_ExternalPointsMgr(myModule->workshop(), myCurrentSketch);
}
void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)
{
myIsMouseOverWindow = false;
- myIsConstraintsShown = true;
+ myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
+ myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
+ myIsConstraintsShown[PartSet_Tools::Expressions] = false;
+
+ if (myExternalPointsMgr) {
+ delete myExternalPointsMgr;
+ myExternalPointsMgr = 0;
+ }
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
// The sketch was aborted
myCurrentSketch = CompositeFeaturePtr();
+ mySketchPlane->eraseSketchPlane(myModule->workshop());
+ // TODO: move this outside of if-else
+ myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);
myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
// Erase all sketcher objects
- QStringList aSketchIds = sketchOperationIdList();
QObjectPtrList aObjects = aDisplayer->displayedObjects();
foreach (ObjectPtr aObj, aObjects) {
DataPtr aObjData = aObj->data();
}
if (!aFOperation->isDisplayedOnStart(myCurrentSketch))
myCurrentSketch->setDisplayed(true);
-
+
myCurrentSketch = CompositeFeaturePtr();
+ mySketchPlane->eraseSketchPlane(myModule->workshop());
+
+ myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);
myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
Events_Loop::loop()->flush(aDispEvent);
}
// restore the module selection modes, which were changed on startSketch
aConnector->activateModuleSelectionModes();
- aConnector->workshop()->displayer()->activateTrihedron(false);
}
void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
{
myIsMouseOverViewProcessed = true;
operationMgr()->onValidateOperation();
- if (canChangeCursor(theOperation)) {
+ // when sketch nested operation is stopped the cursor should be restored unconditionally
+ //if (canChangeCursor(theOperation)) {
QApplication::restoreOverrideCursor();
#ifdef DEBUG_CURSOR
qDebug("stopNestedSketch() : None");
#endif
+ //}
+ /// improvement to deselect automatically all eventual selected objects, when
+ // returning to the neutral point of the Sketcher
+ bool isClearSelectionPossible = true;
+ if (myIsEditLaunching) {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
+ isClearSelectionPossible = false;
+ }
+ }
}
+ if (isClearSelectionPossible)
+ workshop()->selector()->clearSelection();
}
void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)
{
- if (isNestedCreateOperation(theOperation)) {
+ if (isNestedCreateOperation(theOperation, activeSketch())) {
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
(theOperation);
if (aFOperation) {
}
}
+void PartSet_SketcherMgr::activatePlaneFilter(const bool& toActivate)
+{
+ if (toActivate)
+ myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);
+ else
+ myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
+}
+
+bool PartSet_SketcherMgr::operationActivatedByPreselection()
+{
+ bool isOperationStopped = false;
+ ModuleBase_Operation* anOperation = getCurrentOperation();
+ if(anOperation && isNestedSketchOperation(anOperation)) {
+ // Set final definitions if they are necessary
+ //propertyPanelDefined(aOperation);
+ /// Commit sketcher operations automatically
+ /// distance operation are able to show popup editor to modify the distance value
+ /// after entering the value, the operation should be committed/aborted(by Esc key)
+ bool aCanCommitOperation = true;
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (anOperation);
+ if (aFOperation && PartSet_SketcherMgr::isDistanceOperation(aFOperation)) {
+ bool aValueAccepted = setDistanceValueByPreselection(anOperation, myModule->workshop(),
+ aCanCommitOperation);
+ if (!aValueAccepted)
+ return isOperationStopped;
+ }
+
+ if (aCanCommitOperation)
+ isOperationStopped = anOperation->commit();
+ else {
+ anOperation->abort();
+ isOperationStopped = true;
+ }
+ }
+ return isOperationStopped;
+}
+
bool PartSet_SketcherMgr::canUndo() const
{
- return isNestedCreateOperation(getCurrentOperation());
+ return isNestedCreateOperation(getCurrentOperation(), activeSketch());
}
bool PartSet_SketcherMgr::canRedo() const
{
- return isNestedCreateOperation(getCurrentOperation());
+ return isNestedCreateOperation(getCurrentOperation(), activeSketch());
}
bool PartSet_SketcherMgr::canEraseObject(const ObjectPtr& theObject) const
bool aCanErase = true;
// when the sketch operation is active, results of sketch sub-feature can not be hidden
if (myCurrentSketch.get()) {
- ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
- if (aResult.get()) {
- // Display sketcher objects
- for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {
-
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);
- std::list<ResultPtr> aResults = aFeature->results();
- std::list<ResultPtr>::const_iterator anIt;
- for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {
- aCanErase = *anIt != aResult;
- }
- }
- }
+ return !isObjectOfSketch(theObject);
}
return aCanErase;
}
bool aHasActiveSketch = activeSketch().get() != NULL;
if (aHasActiveSketch) {
// 1. the sketch feature should not be displayed during the sketch active operation
- // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch
+ // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch
// nested features can be visualized
FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
if (aFeature.get() != NULL && aFeature == activeSketch()) {
aCanDisplay = false;
}
+ std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ /// some sketch entities should be never shown, e.g. projection feature
+ if (aSketchFeature.get())
+ aCanDisplay = aSketchFeature->canBeDisplayed();
}
else { // there are no an active sketch
// 2. sketch sub-features should not be visualized if the sketch operation is not active
// 3. the method should not filter the objects, which are not related to the current operation.
// The object is filtered just if it is a current operation feature or this feature result
- bool isObjectFound = false;
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
- (getCurrentOperation());
- if (aFOperation) {
- FeaturePtr aFeature = aFOperation->feature();
- if (aFeature.get()) {
- std::list<ResultPtr> aResults = aFeature->results();
- if (theObject == aFeature)
- isObjectFound = true;
- else {
- std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLast = aResults.end();
- for (; anIt != aLast && !isObjectFound; anIt++) {
- isObjectFound = *anIt == theObject;
+ if (aCanDisplay) {
+ bool isObjectFound = false;
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get()) {
+ std::list<ResultPtr> aResults = aFeature->results();
+ if (theObject == aFeature)
+ isObjectFound = true;
+ else {
+ std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLast = aResults.end();
+ for (; anIt != aLast && !isObjectFound; anIt++) {
+ isObjectFound = *anIt == theObject;
+ }
+ }
+ }
+ }
+ if (isObjectFound) {
+ // 4. For created nested feature operation do not display the created feature if
+ // the mouse curstor leaves the OCC window.
+ // The correction cases, which ignores this condition:
+ // a. the property panel values modification
+ // b. the popup menu activated
+ // c. widget editor control
+ #ifndef DEBUG_DO_NOT_BY_ENTER
+ if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ ModuleBase_WidgetEditor* anEditorWdg =
+ anActiveWidget ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWidget) : 0;
+ // the active widget editor should not influence here. The presentation should be visible
+ // always when this widget is active.
+ if (!anEditorWdg && !myIsPopupMenuActive) {
+ // during a nested create operation, the feature is redisplayed only
+ // if the mouse over view
+ // of there was a value modified in the property panel after the mouse left the view
+ aCanDisplay = canDisplayCurrentCreatedFeature();
}
}
+ #endif
}
}
- if (!isObjectFound)
- return aCanDisplay;
-
- // 4. For created nested feature operation do not display the created feature if
- // the mouse curstor leaves the OCC window.
- // The correction cases, which ignores this condition:
- // a. the property panel values modification
- // b. the popup menu activated
- // c. widget editor control
- #ifndef DEBUG_DO_NOT_BY_ENTER
- if (aCanDisplay && isNestedCreateOperation(getCurrentOperation())) {
- ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
- ModuleBase_WidgetEditor* anEditorWdg = anActiveWidget ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWidget) : 0;
- // the active widget editor should not influence here. The presentation should be visible always
- // when this widget is active.
- if (!anEditorWdg && !myIsPopupMenuActive) {
- // during a nested create operation, the feature is redisplayed only if the mouse over view
- // of there was a value modified in the property panel after the mouse left the view
- aCanDisplay = canDisplayCurrentCreatedFeature();
+
+ // checks the sketcher constraints visibility according to active sketch check box states
+ if (aCanDisplay) {
+ bool aProcessed = false;
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get()) {
+ bool aConstraintDisplayed = canDisplayConstraint(aFeature, PartSet_Tools::Any, aProcessed);
+ if (aProcessed)
+ aCanDisplay = aConstraintDisplayed;
}
}
- #endif
+
return aCanDisplay;
}
+bool PartSet_SketcherMgr::canDisplayConstraint(const FeaturePtr& theFeature,
+ const PartSet_Tools::ConstraintVisibleState& theState,
+ bool& isProcessed) const
+{
+ bool aSwitchedOn = true;
+
+ const QStringList& aConstrIds = constraintsIdList();
+
+ std::string aKind = theFeature->getKind();
+ if (aConstrIds.contains(QString(aKind.c_str()))) {
+ bool isTypedConstraint = false;
+
+ switch (theState) {
+ case PartSet_Tools::Dimensional: {
+ bool isDistance = isDistanceKind(aKind);
+ if (isDistance) {
+ isProcessed = true;
+ aSwitchedOn = myIsConstraintsShown[theState];
+ }
+ }
+ break;
+ case PartSet_Tools::Geometrical: {
+ bool isGeometrical = !isDistanceKind(aKind);
+ if (isGeometrical) {
+ isProcessed = true;
+ aSwitchedOn = myIsConstraintsShown[theState];
+ }
+ }
+ break;
+ case PartSet_Tools::Any: {
+ isProcessed = true;
+ bool isDistance = isDistanceKind(aKind);
+ if (isDistance)
+ aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Dimensional];
+ else
+ aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Geometrical];
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ return aSwitchedOn;
+}
+
+/*void PartSet_SketcherMgr::processHiddenObject(const std::list<ObjectPtr>& theObjects)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation && myCurrentSketch.get()) {
+ // find results of the current operation
+ // these results should not be proposed to be deleted
+ FeaturePtr anOperationFeature = aFOperation->feature();
+ std::list<ResultPtr> anOperationResultList = anOperationFeature->results();
+ std::set<ResultPtr> anOperationResults;
+ std::list<ResultPtr>::const_iterator aRIt = anOperationResultList.begin(),
+ aRLast = anOperationResultList.end();
+ for (; aRIt != aRLast; aRIt++)
+ anOperationResults.insert(*aRIt);
+
+ std::set<FeaturePtr> anObjectsToBeDeleted;
+ QStringList anObjectsToBeDeletedNames;
+ std::list<ObjectPtr>::const_iterator anIt = theObjects.begin(), aLast = theObjects.end();
+ for (; anIt != aLast; anIt++) {
+ ObjectPtr anObject = *anIt;
+ bool aCanErase = true;
+ // when the sketch operation is active, results of sketch sub-feature can not be hidden
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
+ // the result is found between current feature results
+ if (anOperationResults.find(aResult) != anOperationResults.end())
+ continue;
+
+ if (aResult.get()) {
+ // Display sketcher objects
+ for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator anIt;
+ for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {
+ aCanErase = *anIt != aResult;
+ }
+ }
+ }
+ if (!aCanErase) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
+ if (aFeature.get() && anObjectsToBeDeleted.find(aFeature) == anObjectsToBeDeleted.end()) {
+ anObjectsToBeDeleted.insert(aFeature);
+ anObjectsToBeDeletedNames.append(aFeature->name().c_str());
+ }
+ }
+ }
+ if (!anObjectsToBeDeleted.empty()) {
+ QString aFeatureNames = anObjectsToBeDeletedNames.join(", ");
+ QString aMessage = tr("The following features have incorrect presentation and \
+will be hidden: %1. Would you like to delete them?")
+ .arg(aFeatureNames);
+ int anAnswer = QMessageBox::question(qApp->activeWindow(), tr("Features hide"),
+ aMessage, QMessageBox::Ok | QMessageBox::Cancel,
+ QMessageBox::Cancel);
+ if (anAnswer == QMessageBox::Ok) {
+ QObjectPtrList anObjects;
+ std::set<FeaturePtr>::const_iterator anIt = anObjectsToBeDeleted.begin(),
+ aLast = anObjectsToBeDeleted.end();
+ for (; anIt != aLast; anIt++)
+ anObjects.append(*anIt);
+ SessionPtr aMgr = ModelAPI_Session::get();
+ DocumentPtr aDoc = aMgr->activeDocument();
+ bool aIsOp = aMgr->isOperation();
+ if (!aIsOp)
+ aMgr->startOperation();
+ workshop()->deleteFeatures(anObjects);
+ //static Events_ID aDeletedEvent = Events_Loop::eventByName(EVENT_OBJECT_DELETED);
+ //static Events_ID aRedispEvent = Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY);
+ //Events_Loop::loop()->flush(aDeletedEvent);
+ //Events_Loop::loop()->flush(aRedispEvent);
+
+ if (!aIsOp)
+ aMgr->finishOperation();
+ }
+ }
+ }
+}*/
+
bool PartSet_SketcherMgr::canDisplayCurrentCreatedFeature() const
{
bool aCanDisplay = myIsMouseOverWindow;
bool PartSet_SketcherMgr::canChangeCursor(ModuleBase_Operation* theOperation) const
{
- return isNestedCreateOperation(theOperation) ||
+ return isNestedCreateOperation(theOperation, activeSketch()) ||
myModule->sketchReentranceMgr()->isInternalEditActive();
}
+const QMap<PartSet_Tools::ConstraintVisibleState, bool>& PartSet_SketcherMgr::showConstraintStates()
+{
+ return myIsConstraintsShown;
+}
+
bool PartSet_SketcherMgr::isObjectOfSketch(const ObjectPtr& theObject) const
{
bool isFoundObject = false;
void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
{
- if (myPlaneFilter.IsNull())
+ if (myPlaneFilter.IsNull())
myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
myPlaneFilter->setPlane(thePln);
}
-void PartSet_SketcherMgr::getCurrentSelection(const FeaturePtr& theFeature,
- const FeaturePtr& theSketch,
- ModuleBase_IWorkshop* theWorkshop,
- FeatureToSelectionMap& theSelection)
+bool PartSet_SketcherMgr::setDistanceValueByPreselection(ModuleBase_Operation* theOperation,
+ ModuleBase_IWorkshop* theWorkshop,
+ bool& theCanCommitOperation)
{
- if (theFeature.get() == NULL)
- return;
-
- std::set<AttributePtr> aSelectedAttributes;
- std::set<ResultPtr> aSelectedResults;
+ bool isValueAccepted = false;
+ theCanCommitOperation = false;
- ModuleBase_IViewer* aViewer = theWorkshop->viewer();
- Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
- if (!aContext.IsNull()) {
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
-
- std::list<ResultPtr> aResults = theFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
- {
- ResultPtr aResult = *aIt;
- AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
- if (aAISObj.get() == NULL)
- continue;
- Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
- for (aContext->InitSelected(); aContext->MoreSelected(); aContext->NextSelected())
- {
- Handle(SelectMgr_EntityOwner) anOwner = aContext->SelectedOwner();
- if (anOwner->Selectable() != anAISIO)
- continue;
- getAttributesOrResults(anOwner, theFeature, theSketch, aResult,
- aSelectedAttributes, aSelectedResults);
- }
- for (aContext->InitDetected(); aContext->MoreDetected(); aContext->NextDetected()) {
- Handle(SelectMgr_EntityOwner) anOwner = aContext->DetectedOwner();
- if (anOwner.IsNull())
- continue;
- if (anOwner->Selectable() != anAISIO)
- continue;
- getAttributesOrResults(anOwner, theFeature, theSketch, aResult,
- aSelectedAttributes, aSelectedResults);
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ FeaturePtr aFeature = aFOperation->feature();
+ // editor is shown only if all attribute references are filled by preseletion
+ bool anAllRefAttrInitialized = true;
+
+ std::list<AttributePtr> aRefAttrs = aFeature->data()->attributes(
+ ModelAPI_AttributeRefAttr::typeId());
+ std::list<AttributePtr>::const_iterator anIt = aRefAttrs.begin(), aLast = aRefAttrs.end();
+ for (; anIt != aLast && anAllRefAttrInitialized; anIt++) {
+ anAllRefAttrInitialized = (*anIt)->isInitialized();
+ }
+ if (anAllRefAttrInitialized) {
+ // Activate dimension value editing on double click
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ // Find corresponded widget to activate value editing
+ foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
+ if (aWgt->attributeID() == "ConstraintValue") {
+ // the featue should be displayed in order to find the AIS text position,
+ // the place where the editor will be shown
+ aFeature->setDisplayed(true);
+ /// the execute is necessary to perform in the feature compute for flyout position
+ aFeature->execute();
+
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_CREATED));
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+
+ PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
+ if (anEditor) {
+ int aX = 0, anY = 0;
+
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(theWorkshop);
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ AISObjectPtr anAIS = aDisplayer->getAISObject(aFeature);
+ Handle(AIS_InteractiveObject) anAISIO;
+ if (anAIS.get() != NULL) {
+ anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
+ }
+ if (anAIS.get() != NULL) {
+ Handle(AIS_InteractiveObject) anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
+
+ if (!anAISIO.IsNull()) {
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAISIO);
+ if (!aDim.IsNull()) {
+ gp_Pnt aPosition = aDim->GetTextPosition();
+
+ ModuleBase_IViewer* aViewer = aWorkshop->viewer();
+ Handle(V3d_View) aView = aViewer->activeView();
+ int aCX, aCY;
+ aView->Convert(aPosition.X(), aPosition.Y(), aPosition.Z(), aCX, aCY);
+
+ QWidget* aViewPort = aViewer->activeViewPort();
+ QPoint aGlPoint = aViewPort->mapToGlobal(QPoint(aCX, aCY));
+ aX = aGlPoint.x();
+ anY = aGlPoint.y();
+ }
+ }
+ anEditor->setCursorPosition(aX, anY);
+ isValueAccepted = anEditor->showPopupEditor(false);
+ theCanCommitOperation = true;
+ }
+ }
}
}
}
- theSelection[theFeature] = std::make_pair(aSelectedAttributes, aSelectedResults);
+ return isValueAccepted;
}
void PartSet_SketcherMgr::getSelectionOwners(const FeaturePtr& theFeature,
return;
FeatureToSelectionMap::const_iterator anIt = theSelection.find(theFeature);
- std::set<AttributePtr> aSelectedAttributes = anIt.value().first;
- std::set<ResultPtr> aSelectedResults = anIt.value().second;
+ SelectionInfo anInfo = anIt.value();
+ std::set<AttributePtr> aSelectedAttributes = anInfo.myAttributes;
+ std::set<ResultPtr> aSelectedResults = anInfo.myResults;
ModuleBase_IViewer* aViewer = theWorkshop->viewer();
// 2. found the feature results's owners
std::list<ResultPtr> aResults = theFeature->results();
std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
- {
+
+ bool isSameShape = false;
+ if (aResults.size() > 0) {
+ ResultPtr aFirstResult = theFeature->firstResult();
+ if (aFirstResult.get() && aFirstResult->shape().get()) {
+ TopoDS_Shape aFirstShape = aFirstResult->shape()->impl<TopoDS_Shape>();
+ isSameShape = aFirstShape.IsEqual(anInfo.myFirstResultShape);
+ }
+ }
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
ResultPtr aResult = *aIt;
AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
if (aAISObj.get() == NULL)
- continue;
+ continue;
Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
- SelectMgr_IndexedMapOfOwner aSelectedOwners;
+ SelectMgr_IndexedMapOfOwner aSelectedOwners;
aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
+ bool aFoundLocalShape = false;
for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {
- Handle(StdSelect_BRepOwner) anOwner = Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
- if ( anOwner.IsNull() || !anOwner->HasShape() )
+ Handle(StdSelect_BRepOwner) anOwner =
+ Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
+ if ( anOwner.IsNull() || !anOwner->HasShape() || theOwnersToSelect.FindIndex(anOwner))
continue;
const TopoDS_Shape& aShape = anOwner->Shape();
TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
if (aShapeType == TopAbs_VERTEX) {
- AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);
+ AttributePtr aPntAttr =
+ PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);
if (aPntAttr.get() != NULL &&
- aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end()) {
+ aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end())
+ theOwnersToSelect.Add(anOwner);
+ else if (isSameShape && anInfo.myLocalSelectedShapes.Contains(aShape)) {
theOwnersToSelect.Add(anOwner);
}
}
else if (aShapeType == TopAbs_EDGE) {
- bool aFound = aSelectedResults.find(aResult) != aSelectedResults.end();
- if (aSelectedResults.find(aResult) != aSelectedResults.end() &&
- theOwnersToSelect.FindIndex(anOwner) <= 0)
+ if (isSameShape && anInfo.myLocalSelectedShapes.Contains(aShape)) {
+ // try to restore local selection on Shape result
+ // we can do this only if the shape was not changed
theOwnersToSelect.Add(anOwner);
+ aFoundLocalShape = true;
+ break;
+ }
+ }
+ }
+ if (!aFoundLocalShape) {
+ // result owners are put in the list of selection only if local selected shapes were not
+ // found
+ if (aSelectedResults.find(aResult) != aSelectedResults.end()) {
+ for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {
+ Handle(StdSelect_BRepOwner) anOwner =
+ Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
+ if ( anOwner.IsNull() || !anOwner->HasShape() || theOwnersToSelect.FindIndex(anOwner))
+ continue;
+ // select whole result
+ theOwnersToSelect.Add(anOwner);
+ }
}
}
}
}
-void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
+void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
+ const bool isToConnect)
{
+ //Temporary commented as we do not modify values in property panel
if (isToConnect) {
- connect(theWidget, SIGNAL(beforeValuesChanged()),
- this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ //connect(theWidget, SIGNAL(beforeValuesChanged()),
+ // this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ //connect(theWidget, SIGNAL(afterValuesChanged()),
+ // this, SLOT(onAfterValuesChangedInPropertyPanel()));
connect(theWidget, SIGNAL(afterValuesChanged()),
- this, SLOT(onAfterValuesChangedInPropertyPanel()));
+ myModule->sketchReentranceMgr(), SLOT(onAfterValuesChangedInPropertyPanel()));
}
else {
- disconnect(theWidget, SIGNAL(beforeValuesChanged()),
- this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ //disconnect(theWidget, SIGNAL(beforeValuesChanged()),
+ // this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ //disconnect(theWidget, SIGNAL(afterValuesChanged()),
+ // this, SLOT(onAfterValuesChangedInPropertyPanel()));
disconnect(theWidget, SIGNAL(afterValuesChanged()),
- this, SLOT(onAfterValuesChangedInPropertyPanel()));
+ myModule->sketchReentranceMgr(), SLOT(onAfterValuesChangedInPropertyPanel()));
}
}
(getCurrentOperation());
if (aFOperation) {
if (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
- PartSet_SketcherMgr::isNestedSketchOperation(aFOperation) &&
+ isNestedSketchOperation(aFOperation) &&
thePreviousState == ModuleBase_ModelWidget::ModifiedInPP) {
FeaturePtr aFeature = aFOperation->feature();
visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
}
}
+void PartSet_SketcherMgr::customizePresentation(const ObjectPtr& theObject)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation && (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
+ isNestedSketchOperation(aFOperation)))
+ SketcherPrs_Tools::sendExpressionShownEvent(myIsConstraintsShown[PartSet_Tools::Expressions]);
+
+ // update entities selection priorities
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
+ // update priority for feature
+ updateSelectionPriority(aFeature, aFeature);
+ // update priority for results of the feature
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLastIt = aResults.end();
+ for (; anIt != aLastIt; anIt++)
+ updateSelectionPriority(*anIt, aFeature);
+ }
+}
+
ModuleBase_Operation* PartSet_SketcherMgr::getCurrentOperation() const
{
return myModule->workshop()->currentOperation();
Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
}
-void PartSet_SketcherMgr::storeSelection(const bool theHighlightedOnly)
+void PartSet_SketcherMgr::storeSelection(const SelectionType theType,
+ PartSet_SketcherMgr::FeatureToSelectionMap& theCurrentSelection)
{
+ if (!myCurrentSketch.get())
+ return;
+
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
ModuleBase_ISelection* aSelect = aWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aHighlighted = aSelect->getHighlighted();
+ QList<ModuleBase_ViewerPrsPtr> aStoredPrs;
- QList<FeaturePtr> aFeatureList;
- if (theHighlightedOnly) {
- fillFeatureList(aHighlighted, myCurrentSketch, aFeatureList);
- }
- else {
- fillFeatureList(aHighlighted, myCurrentSketch, aFeatureList);
+ if (theType == ST_HighlightType || theType == ST_SelectAndHighlightType)
+ aStoredPrs = aSelect->getHighlighted();
- QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected(ModuleBase_ISelection::AllControls);
- fillFeatureList(aSelected, myCurrentSketch, aFeatureList);
+ QList<FeaturePtr> aFeatureList;
+ if (theType == ST_SelectAndHighlightType || theType == ST_SelectType) {
+ QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected(
+ ModuleBase_ISelection::AllControls);
+ aStoredPrs.append(aSelected);
}
// 1. it is necessary to save current selection in order to restore it after the features moving
- myCurrentSelection.clear();
- QList<FeaturePtr>::const_iterator anIt = aFeatureList.begin(), aLast = aFeatureList.end();
+ theCurrentSelection.clear();
+
+ QList<ModuleBase_ViewerPrsPtr>::const_iterator anIt = aStoredPrs.begin(),
+ aLast = aStoredPrs.end();
+
+ CompositeFeaturePtr aSketch = activeSketch();
for (; anIt != aLast; anIt++) {
- getCurrentSelection(*anIt, myCurrentSketch, aWorkshop, myCurrentSelection);
+ ModuleBase_ViewerPrsPtr aPrs = *anIt;
+ ObjectPtr anObject = aPrs->object();
+ if (!anObject.get())
+ continue;
+
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
+ FeaturePtr aFeature;
+ if (aResult.get())
+ aFeature = ModelAPI_Feature::feature(aResult);
+ else
+ aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
+
+ if (!aFeature.get())
+ continue;
+
+ std::set<AttributePtr> aSelectedAttributes;
+ std::set<ResultPtr> aSelectedResults;
+ SelectionInfo anInfo;
+ if (theCurrentSelection.find(aFeature) != theCurrentSelection.end())
+ anInfo = theCurrentSelection.find(aFeature).value();
+
+ TopoDS_Shape aFirstShape;
+ ResultPtr aFirstResult = aFeature->firstResult();
+ if (aFirstResult.get() && aFirstResult->shape().get())
+ aFirstShape = aFirstResult->shape()->impl<TopoDS_Shape>();
+ anInfo.myFirstResultShape = aFirstShape;
+ Handle(SelectMgr_EntityOwner) anOwner = aPrs->owner();
+ if (aResult.get()) {
+ getAttributesOrResults(anOwner, aFeature, aSketch, aResult,
+ anInfo.myAttributes, anInfo.myResults, anInfo.myLocalSelectedShapes);
+ }
+ else {
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ ResultPtr aResult = *aIt;
+ getAttributesOrResults(anOwner, aFeature, aSketch, aResult,
+ anInfo.myAttributes, anInfo.myResults, anInfo.myLocalSelectedShapes);
+ }
+ }
+ theCurrentSelection[aFeature] = anInfo;
}
- //qDebug(QString(" storeSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
+ //qDebug(QString(" storeSelection: %1").arg(theCurrentSelection.size()).toStdString().c_str());
}
-void PartSet_SketcherMgr::restoreSelection()
+void PartSet_SketcherMgr::restoreSelection(
+ PartSet_SketcherMgr::FeatureToSelectionMap& theCurrentSelection)
{
- //qDebug(QString("restoreSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
+ if (!myCurrentSketch.get())
+ return;
+
+ //qDebug(QString("restoreSelection: %1").arg(theCurrentSelection.size()).toStdString().c_str());
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
- FeatureToSelectionMap::const_iterator aSIt = myCurrentSelection.begin(),
- aSLast = myCurrentSelection.end();
+ FeatureToSelectionMap::const_iterator aSIt = theCurrentSelection.begin(),
+ aSLast = theCurrentSelection.end();
SelectMgr_IndexedMapOfOwner anOwnersToSelect;
+ anOwnersToSelect.Clear();
for (; aSIt != aSLast; aSIt++) {
- anOwnersToSelect.Clear();
- getSelectionOwners(aSIt.key(), myCurrentSketch, aWorkshop, myCurrentSelection,
- anOwnersToSelect);
- aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);
+ getSelectionOwners(aSIt.key(), myCurrentSketch, aWorkshop, theCurrentSelection,
+ anOwnersToSelect);
}
+ aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);
}
-void PartSet_SketcherMgr::onShowConstraintsToggle(bool theOn)
+void PartSet_SketcherMgr::onShowConstraintsToggle(int theType, bool theState)
+{
+ PartSet_Tools::ConstraintVisibleState aType = (PartSet_Tools::ConstraintVisibleState)theType;
+
+ updateBySketchParameters(aType, theState);
+}
+
+void PartSet_SketcherMgr::updateBySketchParameters(
+ const PartSet_Tools::ConstraintVisibleState& theType,
+ bool theState)
{
- if (myIsConstraintsShown == theOn)
- return;
if (myCurrentSketch.get() == NULL)
return;
- myIsConstraintsShown = theOn;
+ bool aPrevState = myIsConstraintsShown[theType];
+ myIsConstraintsShown[theType] = theState;
+
+ switch (theType) {
+ case PartSet_Tools::Geometrical:
+ case PartSet_Tools::Dimensional: {
+ if (aPrevState != theState) {
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
+ FeaturePtr aSubFeature = myCurrentSketch->subFeature(i);
+ bool aProcessed = false;
+ bool aConstraintDisplayed = canDisplayConstraint(aSubFeature, theType, aProcessed);
+ if (aProcessed)
+ aSubFeature->setDisplayed(aConstraintDisplayed);
+ }
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+ }
+ }
+ break;
+ case PartSet_Tools::Expressions: {
+ if (aPrevState != theState) {
+ /// call all sketch features redisplay, the expression state will be corrected in customize
+ /// of distance presentation
+ Events_ID anEventId = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
+ PartSet_Tools::sendSubFeaturesEvent(myCurrentSketch, anEventId);
+ }
+ }
+ break;
+ }
+}
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+void PartSet_SketcherMgr::updateSelectionPriority(ObjectPtr theObject,
+ FeaturePtr theFeature)
+{
+ if (!theObject.get() || !theFeature.get())
+ return;
- const QStringList& aConstrIds = constraintsIdList();
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
- FeaturePtr aSubFeature = myCurrentSketch->subFeature(i);
- if (aConstrIds.contains(QString(aSubFeature->getKind().c_str()))) {
- if (myIsConstraintsShown)
- aSubFeature->setDisplayed(true);
- else
- aSubFeature->setDisplayed(false);
+ AISObjectPtr anAIS = workshop()->displayer()->getAISObject(theObject);
+ Handle(AIS_InteractiveObject) anAISIO;
+ if (anAIS.get() != NULL) {
+ anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
+ }
+
+ if (!anAISIO.IsNull()) { // the presentation for the object is visualized
+ int anAdditionalPriority = 0;
+ // current feature
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(theFeature);
+ if (aSPFeature.get() != NULL) {
+ // 1. Vertices
+ // 2. Simple segments
+ // 3. External objects (violet color)
+ // 4. Auxiliary segments (dotted)
+ // StdSelect_BRepSelectionTool::Load uses priority calculating:
+ // Standard_Integer aPriority =
+ // (thePriority == -1) ? GetStandardPriority (theShape, theType) : thePriority;
+ // Priority of Vertex is 8, edge(segment) is 7.
+ // It might be not corrected as provides the condition above.
+ bool isExternal = aSPFeature->isExternal();
+ bool isAuxiliary = PartSet_Tools::isAuxiliarySketchEntity(aSPFeature);
+ // current feature
+ if (!isExternal && !isAuxiliary)
+ anAdditionalPriority = 30;
+ // external feature
+ if (isExternal)
+ anAdditionalPriority = 20;
+ // auxiliary feature
+ if (isAuxiliary) {
+ anAdditionalPriority = 10; /// auxiliary objects should have less priority that
+ // edges/vertices of local selection on not-sketch objects
+ }
+ Handle(ModuleBase_ResultPrs) aResult = Handle(ModuleBase_ResultPrs)::DownCast(anAISIO);
+ if (!aResult.IsNull()) {
+ aResult->setAdditionalSelectionPriority(anAdditionalPriority);
+ }
}
}
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
}
-XGUI_OperationMgr* PartSet_SketcherMgr::operationMgr() const
+XGUI_Workshop* PartSet_SketcherMgr::workshop() const
{
ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ return aConnector->workshop();
+}
- return aWorkshop->operationMgr();
+XGUI_OperationMgr* PartSet_SketcherMgr::operationMgr() const
+{
+ return workshop()->operationMgr();
}