-// Copyright (C) 2014-20xx CEA/DEN, EDF R&D\r
-\r
-// File: PartSet_SketcherMgr.cpp\r
-// Created: 19 Dec 2014\r
-// Author: Vitaly SMETANNIKOV\r
-\r
-#include "PartSet_SketcherMgr.h"\r
-#include "PartSet_SketcherReetntrantMgr.h"\r
-#include "PartSet_Module.h"\r
-#include "PartSet_MouseProcessor.h"\r
-#include "PartSet_Tools.h"\r
-#include "PartSet_WidgetSketchLabel.h"\r
-#include "PartSet_WidgetEditor.h"\r
-#include "PartSet_ResultSketchPrs.h"\r
-\r
-#include <XGUI_ModuleConnector.h>\r
-#include <XGUI_Displayer.h>\r
-#include <XGUI_Workshop.h>\r
-#include <XGUI_ContextMenuMgr.h>\r
-#include <XGUI_Selection.h>\r
-#include <XGUI_SelectionMgr.h>\r
-#include <XGUI_ModuleConnector.h>\r
-#include <XGUI_PropertyPanel.h>\r
-#include <XGUI_ViewerProxy.h>\r
-#include <XGUI_OperationMgr.h>\r
-#include <XGUI_ErrorMgr.h>\r
-#include <XGUI_Tools.h>\r
-\r
-#include <ModuleBase_IPropertyPanel.h>\r
-#include <ModuleBase_ISelection.h>\r
-#include <ModuleBase_IViewer.h>\r
-#include <ModuleBase_IWorkshop.h>\r
-#include <ModuleBase_IViewWindow.h>\r
-#include <ModuleBase_ModelWidget.h>\r
-#include <ModuleBase_Operation.h>\r
-#include <ModuleBase_OperationFeature.h>\r
-#include <ModuleBase_Operation.h>\r
-#include <ModuleBase_WidgetEditor.h>\r
-#include <ModuleBase_ViewerPrs.h>\r
-#include <ModuleBase_Tools.h>\r
-#include <ModuleBase_ResultPrs.h>\r
-\r
-#include <GeomDataAPI_Point2D.h>\r
-\r
-#include <Events_Loop.h>\r
-\r
-#include <SketchPlugin_Line.h>\r
-#include <SketchPlugin_Sketch.h>\r
-#include <SketchPlugin_Point.h>\r
-#include <SketchPlugin_Arc.h>\r
-#include <SketchPlugin_Circle.h>\r
-#include <SketchPlugin_ConstraintLength.h>\r
-#include <SketchPlugin_ConstraintDistance.h>\r
-#include <SketchPlugin_ConstraintParallel.h>\r
-#include <SketchPlugin_ConstraintPerpendicular.h>\r
-#include <SketchPlugin_ConstraintRadius.h>\r
-#include <SketchPlugin_ConstraintRigid.h>\r
-#include <SketchPlugin_ConstraintHorizontal.h>\r
-#include <SketchPlugin_ConstraintVertical.h>\r
-#include <SketchPlugin_ConstraintEqual.h>\r
-#include <SketchPlugin_ConstraintTangent.h>\r
-#include <SketchPlugin_ConstraintCoincidence.h>\r
-#include <SketchPlugin_ConstraintFillet.h>\r
-#include <SketchPlugin_ConstraintMirror.h>\r
-#include <SketchPlugin_ConstraintAngle.h>\r
-#include <SketchPlugin_ConstraintCollinear.h>\r
-#include <SketchPlugin_ConstraintMiddle.h>\r
-#include <SketchPlugin_MultiRotation.h>\r
-#include <SketchPlugin_MultiTranslation.h>\r
-#include <SketchPlugin_IntersectionPoint.h>\r
-\r
-#include <SketcherPrs_Tools.h>\r
-\r
-#include <SelectMgr_IndexedMapOfOwner.hxx>\r
-#include <StdSelect_BRepOwner.hxx>\r
-\r
-//#include <AIS_DimensionSelectionMode.hxx>\r
-#include <AIS_Shape.hxx>\r
-#include <AIS_Dimension.hxx>\r
-\r
-#include <ModelAPI_Events.h>\r
-#include <ModelAPI_Session.h>\r
-#include <ModelAPI_AttributeString.h>\r
-\r
-#include <ModelAPI_Validator.h>\r
-#include <ModelAPI_Tools.h>\r
-\r
-#include <QMouseEvent>\r
-#include <QApplication>\r
-#include <QCursor>\r
-#include <QMessageBox>\r
-#include <QMainWindow>\r
-\r
-//#define DEBUG_DO_NOT_BY_ENTER\r
-//#define DEBUG_SKETCHER_ENTITIES\r
-//#define DEBUG_SKETCH_ENTITIES_ON_MOVE\r
-\r
-//#define DEBUG_CURSOR\r
-\r
-/// Fills attribute and result lists by the selected owner. In case if the attribute is found,\r
-/// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge, put the function\r
-/// result as is to the list of results.\r
-/// \param theOwner a viewer selected owner\r
-/// \param theFeature a feature, where the attribute is searched\r
-/// \param theSketch a current sketch\r
-/// \param theSelectedAttribute an output list of attributes\r
-/// \param theSelectedResults an output list of edge results\r
-void getAttributesOrResults(const Handle(SelectMgr_EntityOwner)& theOwner,\r
- const FeaturePtr& theFeature, const FeaturePtr& theSketch,\r
- const ResultPtr& theResult,\r
- std::set<AttributePtr>& aSelectedAttributes,\r
- std::set<ResultPtr>& aSelectedResults)\r
-{\r
- Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(theOwner);\r
- if (aBRepOwner.IsNull())\r
- return;\r
- Handle(AIS_InteractiveObject) anIO = Handle(AIS_InteractiveObject)::DownCast(\r
- aBRepOwner->Selectable());\r
- if (aBRepOwner->HasShape()) {\r
- const TopoDS_Shape& aShape = aBRepOwner->Shape();\r
- TopAbs_ShapeEnum aShapeType = aShape.ShapeType();\r
- if (aShapeType == TopAbs_VERTEX) {\r
- AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature,\r
- aShape, theSketch);\r
- if (aPntAttr.get() != NULL)\r
- aSelectedAttributes.insert(aPntAttr);\r
- }\r
- else if (aShapeType == TopAbs_EDGE &&\r
- aSelectedResults.find(theResult) == aSelectedResults.end()) {\r
- aSelectedResults.insert(theResult);\r
- }\r
- }\r
-}\r
-\r
-PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)\r
- : QObject(theModule), myModule(theModule), myIsDragging(false), myDragDone(false),\r
- myIsMouseOverWindow(false),\r
- myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),\r
- myIsPopupMenuActive(false)\r
-{\r
- ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();\r
- ModuleBase_IViewer* aViewer = anIWorkshop->viewer();\r
-\r
- myPreviousDrawModeEnabled = true;//aViewer->isSelectionEnabled();\r
-\r
- connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),\r
- this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));\r
-\r
- connect(aViewer, SIGNAL(mouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)),\r
- this, SLOT(onMouseReleased(ModuleBase_IViewWindow*, QMouseEvent*)));\r
-\r
- connect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),\r
- this, SLOT(onMouseMoved(ModuleBase_IViewWindow*, QMouseEvent*)));\r
-\r
- connect(aViewer, SIGNAL(mouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)),\r
- this, SLOT(onMouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)));\r
-\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);\r
- XGUI_Workshop* aWorkshop = aConnector->workshop();\r
- connect(aWorkshop, SIGNAL(applicationStarted()), this, SLOT(onApplicationStarted()));\r
-\r
- myIsConstraintsShown[PartSet_Tools::Geometrical] = true;\r
- myIsConstraintsShown[PartSet_Tools::Dimensional] = true;\r
- myIsConstraintsShown[PartSet_Tools::Expressions] = false;\r
-}\r
-\r
-PartSet_SketcherMgr::~PartSet_SketcherMgr()\r
-{\r
- if (!myPlaneFilter.IsNull())\r
- myPlaneFilter.Nullify();\r
-}\r
-\r
-void PartSet_SketcherMgr::onEnterViewPort()\r
-{\r
- // 1. if the mouse over window, update the next flag. Do not perform update visibility of\r
- // created feature because it should be done in onMouseMove(). Some widgets watch\r
- // the mouse move and use the cursor position to update own values. If the presentaion is\r
- // redisplayed before this update, the feature presentation jumps from reset value to current.\r
- myIsMouseOverWindow = true;\r
-\r
- #ifdef DEBUG_DO_NOT_BY_ENTER\r
- return;\r
- #endif\r
-\r
- if (canChangeCursor(getCurrentOperation())) {\r
- QCursor* aCurrentCursor = QApplication::overrideCursor();\r
- if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {\r
- QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));\r
-#ifdef DEBUG_CURSOR\r
- qDebug("onEnterViewPort() : Qt::CrossCursor");\r
-#endif\r
- }\r
- }\r
-\r
- if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))\r
- return;\r
-\r
- operationMgr()->onValidateOperation();\r
-\r
- // we need change displayed state of the current operation feature\r
- // if the feature is presentable, e.g. distance construction. It has no results, so workshop does\r
- // not accept a signal about the result created. Nothing is shown until mouse is moved out/in view\r
- // port. If the isDisplayed flag is true, the presentable feature is displayed as soon as the\r
- // presentation becomes valid and redisplay happens\r
- //ModuleBase_Operation* aOperation = getCurrentOperation();\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (aFOperation) {\r
- FeaturePtr aFeature = aFOperation->feature();\r
- if (aFeature.get() && aFeature->data()->isValid()) {\r
- visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature), false);\r
- }\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::onLeaveViewPort()\r
-{\r
- myIsMouseOverViewProcessed = false;\r
- myIsMouseOverWindow = false;\r
-\r
- #ifdef DEBUG_DO_NOT_BY_ENTER\r
- return;\r
- #endif\r
-\r
- if (canChangeCursor(getCurrentOperation())) {\r
- QApplication::restoreOverrideCursor();\r
-#ifdef DEBUG_CURSOR\r
- qDebug("onLeaveViewPort() : None");\r
-#endif\r
- }\r
-\r
- if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))\r
- return;\r
-\r
- // the method should be performed if the popup menu is called,\r
- // the reset of the current widget should not happen\r
- if (myIsPopupMenuActive)\r
- return;\r
-\r
- // it is important to validate operation here only if sketch entity create operation is active\r
- // because at this operation we reacts to the mouse leave/enter view port\r
- operationMgr()->onValidateOperation();\r
-\r
- // 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);\r
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();\r
- // disable the viewer update in order to avoid visualization of redisplayed feature in viewer\r
- // obtained after reset value\r
- bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);\r
- ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();\r
- if (anActiveWidget)\r
- anActiveWidget->reset();\r
-\r
- // hides the presentation of the current operation feature\r
- // the feature is to be erased here, but it is correct to call canDisplayObject because\r
- // there can be additional check (e.g. editor widget in distance constraint)\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (aFOperation) {\r
- FeaturePtr aFeature = aFOperation->feature();\r
- visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));\r
- }\r
- // we should update viewer after the presentation are hidden in the viewer\r
- // otherwise the reset presentation(line) appears in the viewer(by quick move from viewer to PP)\r
- aDisplayer->enableUpdateViewer(isEnableUpdateViewer);\r
-}\r
-\r
-void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()\r
-{\r
- if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||\r
- myModule->sketchReentranceMgr()->isInternalEditActive())\r
- return;\r
- // it is necessary to save current selection in order to restore it after the values are modifed\r
- storeSelection();\r
-\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);\r
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();\r
- myPreviousUpdateViewerEnabled = aDisplayer->enableUpdateViewer(false);\r
-}\r
-\r
-void PartSet_SketcherMgr::onAfterValuesChangedInPropertyPanel()\r
-{\r
- if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||\r
- myModule->sketchReentranceMgr()->isInternalEditActive()) {\r
- myModule->sketchReentranceMgr()->updateInternalEditActiveState();\r
- return;\r
- }\r
- // it is necessary to restore current selection in order to restore it after the values are modified\r
- restoreSelection();\r
- myCurrentSelection.clear();\r
-\r
- // 3. the flag to disable the update viewer should be set in order to avoid blinking in the \r
- // viewer happens by deselect/select the modified objects. The flag should be restored after\r
- // the selection processing. The update viewer should be also called.\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);\r
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();\r
- aDisplayer->enableUpdateViewer(myPreviousUpdateViewerEnabled);\r
- aDisplayer->updateViewer();\r
-\r
-\r
-}\r
-\r
-void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)\r
-{\r
- if (myModule->sketchReentranceMgr()->processMousePressed(theWnd, theEvent))\r
- return;\r
-\r
- //get2dPoint(theWnd, theEvent, myClickedPoint);\r
-\r
- if (!(theEvent->buttons() & Qt::LeftButton))\r
- return;\r
-\r
- // Clear dragging mode\r
- myIsDragging = false;\r
-\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- ModuleBase_IViewer* aViewer = aWorkshop->viewer();\r
- if (!aViewer->canDragByMouse())\r
- return;\r
-\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (!aFOperation)\r
- return;\r
-\r
- if (aFOperation->isEditOperation()) {\r
- // If the current widget is a selector, do nothing, it processes the mouse press\r
- ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();\r
- if(anActiveWidget && anActiveWidget->isViewerSelector()) {\r
- return;\r
- }\r
- }\r
-\r
- // Use only for sketch operations\r
- if (myCurrentSketch) {\r
- if (!PartSet_Tools::sketchPlane(myCurrentSketch))\r
- return;\r
-\r
- bool isSketcher = isSketchOperation(aFOperation);\r
- bool isSketchOpe = isNestedSketchOperation(aFOperation);\r
-\r
- // Avoid non-sketch operations\r
- if ((!isSketchOpe) && (!isSketcher))\r
- return;\r
-\r
- bool isEditing = aFOperation->isEditOperation();\r
-\r
- // Ignore creation sketch operation\r
- if ((!isSketcher) && (!isEditing))\r
- return;\r
-\r
- Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();\r
- // Remember highlighted objects for editing\r
- ModuleBase_ISelection* aSelect = aWorkshop->selection();\r
-\r
- bool aHasShift = (theEvent->modifiers() & Qt::ShiftModifier);\r
- storeSelection(!aHasShift);\r
-\r
- if (myCurrentSelection.empty()) {\r
- if (isSketchOpe && (!isSketcher))\r
- // commit previous operation\r
- if (!aFOperation->commit())\r
- aFOperation->abort();\r
- return;\r
- }\r
- // Init flyout point for radius rotation\r
- FeaturePtr aFeature = myCurrentSelection.begin().key();\r
-\r
- get2dPoint(theWnd, theEvent, myCurrentPoint);\r
- if (isSketcher) {\r
- myIsDragging = true;\r
- myDragDone = false;\r
-\r
- myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);\r
- // selection should be restored before edit operation start to process the\r
- // selected entities, e.g. selection of point(attribute on a line) should edit the point\r
- restoreSelection();\r
- launchEditing();\r
- if (aFeature.get() != NULL) {\r
- std::shared_ptr<SketchPlugin_Feature> aSPFeature = \r
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);\r
- if (aSPFeature.get() && \r
- (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||\r
- aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {\r
- DataPtr aData = aSPFeature->data();\r
- AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());\r
- std::shared_ptr<GeomDataAPI_Point2D> aFPAttr = \r
- std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);\r
- aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);\r
- }\r
- }\r
- } else if (isSketchOpe && isEditing) {\r
- // If selected another object commit current result\r
- aFOperation->commit();\r
-\r
- myIsDragging = true;\r
- myDragDone = false;\r
-\r
- myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);\r
- // selection should be restored before edit operation start to process the\r
- // selected entities, e.g. selection of point(attribute on a line) should edit the point\r
- restoreSelection();\r
- launchEditing();\r
- if (aFeature.get() != NULL) {\r
- std::shared_ptr<SketchPlugin_Feature> aSPFeature = \r
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);\r
- if (aSPFeature.get() && \r
- (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||\r
- aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {\r
- DataPtr aData = aSPFeature->data();\r
- AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());\r
- std::shared_ptr<GeomDataAPI_Point2D> aFPAttr = \r
- std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);\r
- aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);\r
- }\r
- }\r
- restoreSelection();\r
- }\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)\r
-{\r
- if (myModule->sketchReentranceMgr()->processMouseReleased(theWnd, theEvent))\r
- return;\r
-\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- ModuleBase_IViewer* aViewer = aWorkshop->viewer();\r
- if (!aViewer->canDragByMouse())\r
- return;\r
- ModuleBase_Operation* aOp = getCurrentOperation();\r
- if (aOp) {\r
- if (isNestedSketchOperation(aOp)) {\r
- // Only for sketcher operations\r
- if (myIsDragging) {\r
- if (myDragDone) {\r
- myCurrentSelection.clear();\r
- }\r
- }\r
- }\r
- }\r
-\r
- aWorkshop->viewer()->enableDrawMode(myPreviousDrawModeEnabled);\r
- myIsDragging = false;\r
-\r
- ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();\r
- PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);\r
- if (aProcessor)\r
- aProcessor->mouseReleased(theWnd, theEvent);\r
-}\r
-\r
-void PartSet_SketcherMgr::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)\r
-{\r
-#ifdef DEBUG_SKETCH_ENTITIES_ON_MOVE\r
- CompositeFeaturePtr aSketch = activeSketch();\r
- if (aSketch.get()) {\r
- std::cout << "mouse move SKETCH FEATURES [" << aSketch->numberOfSubs() << "]:" << std::endl;\r
- QStringList anInfo;\r
- for (int i = 0, aNbSubs = aSketch->numberOfSubs(); i < aNbSubs; i++) {\r
- //std::cout << getFeatureInfo(aSketch->subFeature(i), false) << std::endl;\r
- anInfo.append(ModuleBase_Tools::objectInfo(aSketch->subFeature(i)));\r
- }\r
- QString anInfoStr = anInfo.join("\n");\r
- qDebug(QString("%1").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());\r
- }\r
-#endif\r
-\r
- if (myModule->sketchReentranceMgr()->processMouseMoved(theWnd, theEvent))\r
- return;\r
-\r
- if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {\r
- // 1. perform the widget mouse move functionality and display the presentation\r
- // the mouse move should be processed in the widget, if it can in order to visualize correct\r
- // presentation. These widgets correct the feature attribute according to the mouse position\r
- ModuleBase_ModelWidget* anActiveWidget = myModule->activeWidget();\r
- PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);\r
- if (aProcessor)\r
- aProcessor->mouseMoved(theWnd, theEvent);\r
- if (!myIsMouseOverViewProcessed) {\r
- myIsMouseOverViewProcessed = true;\r
-\r
- // the feature is to be erased here, but it is correct to call canDisplayObject because\r
- // there can be additional check (e.g. editor widget in distance constraint)\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (aFOperation) {\r
- FeaturePtr aFeature = aFOperation->feature();\r
- visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));\r
- }\r
- }\r
- }\r
- //myClickedPoint.clear();\r
-\r
- if (myIsDragging) {\r
- // 1. the current selection is saved in the mouse press method in order to restore it after moving\r
- // 2. the enable selection in the viewer should be temporary switched off in order to ignore\r
- // mouse press signal in the viewer(it call Select for AIS context and the dragged objects are\r
- // deselected). This flag should be restored in the slot, processed the mouse release signal.\r
-\r
- ModuleBase_Operation* aCurrentOperation = getCurrentOperation();\r
- if (!aCurrentOperation)\r
- return;\r
- if (isSketchOperation(aCurrentOperation))\r
- return; // No edit operation activated\r
-\r
- Handle(V3d_View) aView = theWnd->v3dView();\r
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);\r
- Point aMousePnt;\r
- get2dPoint(theWnd, theEvent, aMousePnt);\r
- double dX = aMousePnt.myCurX - myCurrentPoint.myCurX;\r
- double dY = aMousePnt.myCurY - myCurrentPoint.myCurY;\r
-\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);\r
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();\r
- // 3. the flag to disable the update viewer should be set in order to avoid blinking in the \r
- // viewer happens by deselect/select the modified objects. The flag should be restored after\r
- // the selection processing. The update viewer should be also called.\r
- bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);\r
-\r
- static Events_ID aMoveEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);\r
- //static Events_ID aUpdateEvent = Events_Loop::eventByName(EVENT_OBJECT_UPDATED);\r
- FeatureToSelectionMap::const_iterator anIt = myCurrentSelection.begin(),\r
- aLast = myCurrentSelection.end();\r
- // 4. the features and attributes modification(move)\r
- bool isModified = false;\r
- for (; anIt != aLast; anIt++) {\r
- FeaturePtr aFeature = anIt.key();\r
-\r
- std::set<AttributePtr> anAttributes = anIt.value().first;\r
- // Process selection by attribute: the priority to the attribute\r
- if (!anAttributes.empty()) {\r
- std::set<AttributePtr>::const_iterator anAttIt = anAttributes.begin(),\r
- anAttLast = anAttributes.end();\r
- for (; anAttIt != anAttLast; anAttIt++) {\r
- AttributePtr anAttr = *anAttIt;\r
- if (anAttr.get() == NULL)\r
- continue;\r
- std::string aAttrId = anAttr->id();\r
- DataPtr aData = aFeature->data();\r
- if (aData->isValid()) {\r
- std::shared_ptr<GeomDataAPI_Point2D> aPoint = \r
- std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(aAttrId));\r
- if (aPoint.get() != NULL) {\r
- bool isImmutable = aPoint->setImmutable(true);\r
- aPoint->move(dX, dY);\r
- isModified = true;\r
- ModelAPI_EventCreator::get()->sendUpdated(aFeature, aMoveEvent);\r
- aPoint->setImmutable(isImmutable);\r
- }\r
- }\r
- }\r
- } else {\r
- // Process selection by feature\r
- std::shared_ptr<SketchPlugin_Feature> aSketchFeature =\r
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);\r
- if (aSketchFeature) {\r
- aSketchFeature->move(dX, dY);\r
- isModified = true;\r
- ModelAPI_EventCreator::get()->sendUpdated(aSketchFeature, aMoveEvent);\r
- }\r
- }\r
- }\r
- // the modified state of the current operation should be updated if there are features, which\r
- // were changed here\r
- if (isModified) {\r
- aCurrentOperation->onValuesChanged();\r
- }\r
- Events_Loop::loop()->flush(aMoveEvent); // up all move events - to be processed in the solver\r
- //Events_Loop::loop()->flush(aUpdateEvent); // up update events - to redisplay presentations\r
-\r
- // 5. it is necessary to save current selection in order to restore it after the features moving\r
- restoreSelection();\r
- // 6. restore the update viewer flag and call this update\r
- aDisplayer->enableUpdateViewer(isEnableUpdateViewer);\r
- aDisplayer->updateViewer();\r
-\r
- myDragDone = true;\r
- myCurrentPoint = aMousePnt;\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::onMouseDoubleClick(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)\r
-{\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (aFOperation && aFOperation->isEditOperation()) {\r
- std::string aId = aFOperation->id().toStdString();\r
- if (isDistanceOperation(aFOperation))\r
- {\r
- // Activate dimension value editing on double click\r
- ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();\r
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();\r
- // Find corresponded widget to activate value editing\r
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {\r
- if (aWgt->attributeID() == SketchPlugin_Constraint::VALUE() ||\r
- aWgt->attributeID() == SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()) {\r
- PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);\r
- if (anEditor)\r
- anEditor->showPopupEditor();\r
- return;\r
- }\r
- }\r
- }\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::onApplicationStarted()\r
-{\r
- ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);\r
- XGUI_Workshop* aWorkshop = aConnector->workshop();\r
- PartSet_SketcherReetntrantMgr* aReentranceMgr = myModule->sketchReentranceMgr();\r
-\r
- XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();\r
- if (aPropertyPanel) {\r
- //connect(aPropertyPanel, SIGNAL(beforeWidgetActivated(ModuleBase_ModelWidget*)),\r
- // this, SLOT(onBeforeWidgetActivated(ModuleBase_ModelWidget*)));\r
-\r
- connect(aPropertyPanel, SIGNAL(noMoreWidgets(const std::string&)),\r
- aReentranceMgr, SLOT(onNoMoreWidgets(const std::string&)));\r
- connect(aPropertyPanel, SIGNAL(widgetActivated(ModuleBase_ModelWidget*)),\r
- aReentranceMgr, SLOT(onWidgetActivated()));\r
- }\r
-\r
- XGUI_ViewerProxy* aViewerProxy = aWorkshop->viewer();\r
- connect(aViewerProxy, SIGNAL(enterViewPort()), this, SLOT(onEnterViewPort()));\r
- connect(aViewerProxy, SIGNAL(leaveViewPort()), this, SLOT(onLeaveViewPort()));\r
-\r
- XGUI_ContextMenuMgr* aContextMenuMgr = aWorkshop->contextMenuMgr();\r
- connect(aContextMenuMgr, SIGNAL(beforeContextMenu()), this, SLOT(onBeforeContextMenu()));\r
- connect(aContextMenuMgr, SIGNAL(afterContextMenu()), this, SLOT(onAfterContextMenu()));\r
-}\r
-\r
-//void PartSet_SketcherMgr::onBeforeWidgetActivated(ModuleBase_ModelWidget* theWidget)\r
-//{\r
- //if (!myClickedPoint.myIsInitialized)\r
- // return;\r
-\r
- //ModuleBase_Operation* aOperation = getCurrentOperation();\r
- // the distance constraint feature should not use the clickedd point\r
- // this is workaround in order to don't throw down the flyout point value,\r
- // set by execute() method of these type of features\r
- //if (isDistanceOperation(aOperation))\r
- // return;\r
-\r
- //PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(theWidget);\r
- //if (aPnt2dWgt) {\r
- // aPnt2dWgt->setPoint(myClickedPoint.myCurX, myClickedPoint.myCurY);\r
- //}\r
-//}\r
-\r
-void PartSet_SketcherMgr::onBeforeContextMenu()\r
-{\r
- myIsPopupMenuActive = true;\r
-}\r
-\r
-void PartSet_SketcherMgr::onAfterContextMenu()\r
-{\r
- myIsPopupMenuActive = false;\r
-}\r
-\r
-void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent, \r
- Point& thePoint)\r
-{\r
- Handle(V3d_View) aView = theWnd->v3dView();\r
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);\r
- double aX, anY;\r
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, anY);\r
- thePoint.setValue(aX, anY);\r
-}\r
-\r
-void PartSet_SketcherMgr::launchEditing()\r
-{\r
- if (!myCurrentSelection.empty()) {\r
- FeaturePtr aFeature = myCurrentSelection.begin().key();\r
- std::shared_ptr<SketchPlugin_Feature> aSPFeature = \r
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);\r
- if (aSPFeature && (!aSPFeature->isExternal())) {\r
- myModule->editFeature(aSPFeature);\r
- }\r
- }\r
-}\r
-\r
-bool PartSet_SketcherMgr::sketchSolverError()\r
-{\r
- bool anError = false;\r
- CompositeFeaturePtr aSketch = activeSketch();\r
- if (aSketch.get()) {\r
- AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());\r
- anError = !aAttributeString->value().empty();\r
- }\r
- return anError;\r
-}\r
-\r
-QString PartSet_SketcherMgr::getFeatureError(const FeaturePtr& theFeature)\r
-{\r
- std::string anError = "";\r
- if (!theFeature.get() || !theFeature->data()->isValid())\r
- return anError.c_str();\r
-\r
- CompositeFeaturePtr aSketch = activeSketch();\r
- if (aSketch.get() && aSketch == theFeature) {\r
- AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());\r
- anError = aAttributeString->value();\r
- ModuleBase_Tools::translate(aSketch->getKind(), anError);\r
- }\r
- return anError.c_str();\r
-}\r
-\r
-void PartSet_SketcherMgr::clearClickedFlags()\r
-{\r
- //myClickedPoint.clear();\r
- myCurrentPoint.clear();\r
-}\r
-\r
-const QStringList& PartSet_SketcherMgr::replicationsIdList()\r
-{\r
- static QStringList aReplicationIds;\r
- if (aReplicationIds.size() == 0) {\r
- aReplicationIds << SketchPlugin_ConstraintMirror::ID().c_str();\r
- aReplicationIds << SketchPlugin_MultiRotation::ID().c_str();\r
- aReplicationIds << SketchPlugin_MultiTranslation::ID().c_str();\r
- }\r
- return aReplicationIds;\r
-}\r
-\r
-const QStringList& PartSet_SketcherMgr::constraintsIdList()\r
-{\r
- static QStringList aConstraintIds;\r
- if (aConstraintIds.size() == 0) {\r
- aConstraintIds << SketchPlugin_ConstraintLength::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintDistance::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintRigid::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintRadius::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintParallel::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintHorizontal::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintVertical::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintEqual::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintTangent::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintCoincidence::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintAngle::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintCollinear::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintMiddle::ID().c_str();\r
- aConstraintIds << SketchPlugin_ConstraintMirror::ID().c_str();\r
- aConstraintIds << SketchPlugin_MultiTranslation::ID().c_str();\r
- aConstraintIds << SketchPlugin_MultiRotation::ID().c_str();\r
- }\r
- return aConstraintIds;\r
-}\r
-\r
-void PartSet_SketcherMgr::sketchSelectionModes(QIntList& theModes)\r
-{\r
- theModes.clear();\r
-\r
- theModes.append(SketcherPrs_Tools::Sel_Dimension_Text);\r
- theModes.append(SketcherPrs_Tools::Sel_Dimension_Line);\r
- theModes.append(SketcherPrs_Tools::Sel_Constraint);\r
- theModes.append(TopAbs_VERTEX);\r
- theModes.append(TopAbs_EDGE);\r
-}\r
-\r
-Handle(AIS_InteractiveObject) PartSet_SketcherMgr::createPresentation(const ResultPtr& theResult)\r
-{\r
- Handle(AIS_InteractiveObject) aPrs;\r
-\r
- FeaturePtr aFeature = ModelAPI_Feature::feature(theResult);\r
- if (aFeature.get() && aFeature->getKind() == SketchPlugin_Sketch::ID()) {\r
- aPrs = new PartSet_ResultSketchPrs(theResult);\r
- }\r
- return aPrs;\r
-}\r
-\r
-bool PartSet_SketcherMgr::isSketchOperation(ModuleBase_Operation* theOperation)\r
-{\r
- return theOperation && theOperation->id().toStdString() == SketchPlugin_Sketch::ID();\r
-}\r
-\r
-bool PartSet_SketcherMgr::isNestedSketchOperation(ModuleBase_Operation* theOperation) const\r
-{\r
- bool aNestedSketch = false;\r
-\r
- FeaturePtr anActiveSketch = activeSketch();\r
- if (anActiveSketch.get() && theOperation) {\r
- ModuleBase_Operation* aSketchOperation = operationMgr()->findOperation(\r
- anActiveSketch->getKind().c_str());\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (theOperation);\r
- if (aSketchOperation && aFOperation) {\r
- FeaturePtr aFeature = aFOperation->feature();\r
- if (aFeature.get()) {\r
- QStringList aGrantedOpIds = aSketchOperation->grantedOperationIds();\r
- aNestedSketch = aGrantedOpIds.contains(aFeature->getKind().c_str());\r
- }\r
- }\r
- }\r
- return aNestedSketch;\r
-}\r
-\r
-bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation,\r
- const CompositeFeaturePtr& theSketch) const\r
-{\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (theOperation);\r
- return aFOperation && !aFOperation->isEditOperation() &&\r
- isNestedSketchOperation(aFOperation);\r
-}\r
-\r
-bool PartSet_SketcherMgr::isNestedEditOperation(ModuleBase_Operation* theOperation,\r
- const CompositeFeaturePtr& theSketch) const\r
-{\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (theOperation);\r
- return aFOperation && aFOperation->isEditOperation() &&\r
- isNestedSketchOperation(aFOperation);\r
-}\r
-\r
-bool PartSet_SketcherMgr::isEntity(const std::string& theId)\r
-{\r
- return (theId == SketchPlugin_Line::ID()) ||\r
- (theId == SketchPlugin_Point::ID()) ||\r
- (theId == SketchPlugin_Arc::ID()) ||\r
- (theId == SketchPlugin_Circle::ID());\r
-}\r
-\r
-bool PartSet_SketcherMgr::isDistanceOperation(ModuleBase_Operation* theOperation)\r
-{\r
- std::string anId = theOperation ? theOperation->id().toStdString() : "";\r
-\r
- return isDistanceKind(anId);\r
-}\r
-\r
-bool PartSet_SketcherMgr::isDistanceKind(std::string& theKind)\r
-{\r
- return (theKind == SketchPlugin_ConstraintLength::ID()) ||\r
- (theKind == SketchPlugin_ConstraintDistance::ID()) ||\r
- (theKind == SketchPlugin_ConstraintRadius::ID()) ||\r
- (theKind == SketchPlugin_ConstraintAngle::ID());\r
-}\r
-\r
-void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)\r
-{\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (!aFOperation)\r
- return;\r
-\r
- myModule->onViewTransformed();\r
-\r
- // Display all sketcher sub-Objects\r
- myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFOperation->feature());\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());\r
-\r
- // Hide sketcher result\r
- std::list<ResultPtr> aResults = myCurrentSketch->results();\r
- std::list<ResultPtr>::const_iterator aIt;\r
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {\r
- (*aIt)->setDisplayed(false);\r
- }\r
- myCurrentSketch->setDisplayed(false);\r
-\r
- // Remove invalid sketch entities\r
- std::set<FeaturePtr> anInvalidFeatures;\r
- ModelAPI_ValidatorsFactory* aFactory = ModelAPI_Session::get()->validators();\r
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {\r
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);\r
- if (aFeature.get()) {\r
- if (!aFactory->validate(aFeature))\r
- anInvalidFeatures.insert(aFeature);\r
- }\r
- }\r
- if (!anInvalidFeatures.empty()) {\r
- std::map<FeaturePtr, std::set<FeaturePtr> > aReferences;\r
- ModelAPI_Tools::findAllReferences(anInvalidFeatures, aReferences, false);\r
-\r
- std::set<FeaturePtr>::const_iterator anIt = anInvalidFeatures.begin(),\r
- aLast = anInvalidFeatures.end();\r
- // separate features to references to parameter features and references to others\r
- QStringList anInvalidFeatureNames;\r
- for (; anIt != aLast; anIt++) {\r
- FeaturePtr aFeature = *anIt;\r
- if (aFeature.get())\r
- anInvalidFeatureNames.append(aFeature->name().c_str());\r
- }\r
- std::string aPrefixInfo = QString("Invalid features of the sketch will be deleted: %1.\n\n").\r
- arg(anInvalidFeatureNames.join(", ")).toStdString().c_str();\r
- std::set<FeaturePtr> aFeatureRefsToDelete;\r
- if (ModuleBase_Tools::askToDelete(anInvalidFeatures, aReferences, aConnector->desktop(),\r
- aFeatureRefsToDelete, aPrefixInfo)) {\r
- if (!aFeatureRefsToDelete.empty())\r
- anInvalidFeatures.insert(aFeatureRefsToDelete.begin(), aFeatureRefsToDelete.end());\r
- ModelAPI_Tools::removeFeatures(anInvalidFeatures, true);\r
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));\r
- // TODO: call the next method in the XGUI_OperationMgr::onOperationStarted().\r
- workshop()->errorMgr()->updateAcceptAllAction(myCurrentSketch);\r
- }\r
- }\r
-\r
- // Display sketcher objects\r
- QStringList anInfo;\r
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {\r
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);\r
-#ifdef DEBUG_SKETCHER_ENTITIES\r
- anInfo.append(ModuleBase_Tools::objectInfo(aFeature));\r
-#endif\r
- std::list<ResultPtr> aResults = aFeature->results();\r
- std::list<ResultPtr>::const_iterator aIt;\r
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {\r
- (*aIt)->setDisplayed(true);\r
- }\r
- aFeature->setDisplayed(true);\r
- }\r
-#ifdef DEBUG_SKETCHER_ENTITIES\r
- QString anInfoStr = anInfo.join(";\t");\r
- qDebug(QString("startSketch: %1, %2").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());\r
-#endif\r
-\r
- if(myCirclePointFilter.IsNull()) {\r
- myCirclePointFilter = new PartSet_CirclePointFilter(myModule->workshop());\r
- }\r
-\r
- myModule->workshop()->viewer()->addSelectionFilter(myCirclePointFilter);\r
-\r
- if (myPlaneFilter.IsNull()) \r
- myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();\r
-\r
- myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);\r
- bool aHasPlane = false;\r
- std::shared_ptr<GeomAPI_Pln> aPln;\r
- aPln = PartSet_Tools::sketchPlane(myCurrentSketch);\r
- myPlaneFilter->setPlane(aPln);\r
-\r
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));\r
- // all displayed objects should be activated in current selection modes according to switched\r
- // plane filter\r
- if (aPln.get())\r
- aConnector->activateModuleSelectionModes();\r
-}\r
-\r
-void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)\r
-{\r
- myIsMouseOverWindow = false;\r
- myIsConstraintsShown[PartSet_Tools::Geometrical] = true;\r
- myIsConstraintsShown[PartSet_Tools::Dimensional] = true;\r
- myIsConstraintsShown[PartSet_Tools::Expressions] = false;\r
-\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());\r
-\r
- DataPtr aData = myCurrentSketch->data();\r
- if (!aData->isValid()) {\r
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();\r
- // The sketch was aborted\r
- myCurrentSketch = CompositeFeaturePtr();\r
- // TODO: move this outside of if-else\r
- myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);\r
- myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);\r
-\r
- // Erase all sketcher objects\r
- QObjectPtrList aObjects = aDisplayer->displayedObjects();\r
- foreach (ObjectPtr aObj, aObjects) {\r
- DataPtr aObjData = aObj->data();\r
- if (!aObjData->isValid())\r
- aObj->setDisplayed(false);\r
- }\r
- }\r
- else {\r
- // Hide all sketcher sub-Objects\r
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {\r
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);\r
- std::list<ResultPtr> aResults = aFeature->results();\r
- std::list<ResultPtr>::const_iterator aIt;\r
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {\r
- (*aIt)->setDisplayed(false);\r
- }\r
- aFeature->setDisplayed(false);\r
- }\r
- // Display sketcher result\r
- std::list<ResultPtr> aResults = myCurrentSketch->results();\r
- std::list<ResultPtr>::const_iterator aIt;\r
- Events_Loop* aLoop = Events_Loop::loop();\r
- static Events_ID aDispEvent = aLoop->eventByName(EVENT_OBJECT_TO_REDISPLAY);\r
-\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (theOperation);\r
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {\r
- if (!aFOperation->isDisplayedOnStart(*aIt)) {\r
- (*aIt)->setDisplayed(true);\r
- // this display event is needed because sketch already may have "displayed" state,\r
- // but not displayed while it is still active (issue 613, abort of existing sketch)\r
- ModelAPI_EventCreator::get()->sendUpdated(*aIt, aDispEvent);\r
- }\r
- }\r
- if (!aFOperation->isDisplayedOnStart(myCurrentSketch))\r
- myCurrentSketch->setDisplayed(true);\r
- \r
- myCurrentSketch = CompositeFeaturePtr();\r
-\r
- myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);\r
- myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);\r
-\r
- Events_Loop::loop()->flush(aDispEvent);\r
- }\r
- // restore the module selection modes, which were changed on startSketch\r
- aConnector->activateModuleSelectionModes();\r
-}\r
-\r
-void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)\r
-{\r
- if (canChangeCursor(theOperation) && myIsMouseOverWindow) {\r
- QCursor* aCurrentCursor = QApplication::overrideCursor();\r
- if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {\r
- QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));\r
-#ifdef DEBUG_CURSOR\r
- qDebug("startNestedSketch() : Qt::CrossCursor");\r
-#endif\r
- }\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOperation)\r
-{\r
- myIsMouseOverViewProcessed = true;\r
- operationMgr()->onValidateOperation();\r
- // when sketch nested operation is stopped the cursor should be restored unconditionally\r
- //if (canChangeCursor(theOperation)) {\r
- QApplication::restoreOverrideCursor();\r
-#ifdef DEBUG_CURSOR\r
- qDebug("stopNestedSketch() : None");\r
-#endif\r
- //}\r
- /// improvement to deselect automatically all eventual selected objects, when\r
- // returning to the neutral point of the Sketcher\r
- workshop()->selector()->clearSelection();\r
-}\r
-\r
-void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)\r
-{\r
- if (isNestedCreateOperation(theOperation, activeSketch())) {\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (theOperation);\r
- if (aFOperation) {\r
- FeaturePtr aFeature = aFOperation->feature();\r
- // it is necessary to check the the feature data validity because\r
- // some kind of features are removed by an operation commit(the macro state of a feature)\r
- if (aFeature.get() && aFeature->data()->isValid()) {\r
- visualizeFeature(aFeature, aFOperation->isEditOperation(), true);\r
- }\r
- }\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::activatePlaneFilter(const bool& toActivate)\r
-{\r
- if (toActivate)\r
- myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);\r
- else\r
- myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);\r
-}\r
-\r
-bool PartSet_SketcherMgr::operationActivatedByPreselection()\r
-{\r
- bool isOperationStopped = false;\r
- ModuleBase_Operation* anOperation = getCurrentOperation();\r
- if(anOperation && isNestedSketchOperation(anOperation)) {\r
- // Set final definitions if they are necessary\r
- //propertyPanelDefined(aOperation);\r
- /// Commit sketcher operations automatically\r
- /// distance operation are able to show popup editor to modify the distance value\r
- /// after entering the value, the operation should be committed/aborted(by Esc key)\r
- bool aCanCommitOperation = true;\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (anOperation);\r
- if (aFOperation && PartSet_SketcherMgr::isDistanceOperation(aFOperation)) {\r
- bool aValueAccepted = setDistanceValueByPreselection(anOperation, myModule->workshop(),\r
- aCanCommitOperation);\r
- if (!aValueAccepted)\r
- return isOperationStopped;\r
- }\r
-\r
- if (aCanCommitOperation)\r
- isOperationStopped = anOperation->commit();\r
- else {\r
- anOperation->abort();\r
- isOperationStopped = true;\r
- }\r
- }\r
- return isOperationStopped;\r
-}\r
-\r
-bool PartSet_SketcherMgr::canUndo() const\r
-{\r
- return isNestedCreateOperation(getCurrentOperation(), activeSketch());\r
-}\r
-\r
-bool PartSet_SketcherMgr::canRedo() const\r
-{\r
- return isNestedCreateOperation(getCurrentOperation(), activeSketch());\r
-}\r
-\r
-bool PartSet_SketcherMgr::canEraseObject(const ObjectPtr& theObject) const\r
-{\r
- bool aCanErase = true;\r
- // when the sketch operation is active, results of sketch sub-feature can not be hidden\r
- if (myCurrentSketch.get()) {\r
- return !isObjectOfSketch(theObject);\r
- }\r
- return aCanErase;\r
-}\r
-\r
-bool PartSet_SketcherMgr::canDisplayObject(const ObjectPtr& theObject) const\r
-{\r
- bool aCanDisplay = true;\r
-\r
- bool aHasActiveSketch = activeSketch().get() != NULL;\r
- if (aHasActiveSketch) {\r
- // 1. the sketch feature should not be displayed during the sketch active operation\r
- // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch \r
- // nested features can be visualized\r
- FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);\r
- if (aFeature.get() != NULL && aFeature == activeSketch()) {\r
- aCanDisplay = false;\r
- }\r
- std::shared_ptr<SketchPlugin_Feature> aSketchFeature =\r
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);\r
- /// some sketch entities should be never shown, e.g. projection feature\r
- if (aSketchFeature.get())\r
- aCanDisplay = aSketchFeature->canBeDisplayed();\r
- }\r
- else { // there are no an active sketch\r
- // 2. sketch sub-features should not be visualized if the sketch operation is not active\r
- FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);\r
- if (aFeature.get() != NULL) {\r
- std::shared_ptr<SketchPlugin_Feature> aSketchFeature =\r
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);\r
- if (aSketchFeature.get()) {\r
- aCanDisplay = false;\r
- }\r
- }\r
- }\r
-\r
- // 3. the method should not filter the objects, which are not related to the current operation.\r
- // The object is filtered just if it is a current operation feature or this feature result\r
- if (aCanDisplay) {\r
- bool isObjectFound = false;\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (aFOperation) {\r
- FeaturePtr aFeature = aFOperation->feature();\r
- if (aFeature.get()) {\r
- std::list<ResultPtr> aResults = aFeature->results();\r
- if (theObject == aFeature)\r
- isObjectFound = true;\r
- else {\r
- std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLast = aResults.end();\r
- for (; anIt != aLast && !isObjectFound; anIt++) {\r
- isObjectFound = *anIt == theObject;\r
- }\r
- }\r
- }\r
- }\r
- if (isObjectFound) {\r
- // 4. For created nested feature operation do not display the created feature if\r
- // the mouse curstor leaves the OCC window.\r
- // The correction cases, which ignores this condition:\r
- // a. the property panel values modification\r
- // b. the popup menu activated\r
- // c. widget editor control\r
- #ifndef DEBUG_DO_NOT_BY_ENTER\r
- if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {\r
- ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();\r
- ModuleBase_WidgetEditor* anEditorWdg = anActiveWidget ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWidget) : 0;\r
- // the active widget editor should not influence here. The presentation should be visible always\r
- // when this widget is active.\r
- if (!anEditorWdg && !myIsPopupMenuActive) {\r
- // during a nested create operation, the feature is redisplayed only if the mouse over view\r
- // of there was a value modified in the property panel after the mouse left the view\r
- aCanDisplay = canDisplayCurrentCreatedFeature();\r
- }\r
- }\r
- #endif\r
- }\r
- }\r
-\r
- // checks the sketcher constraints visibility according to active sketch check box states\r
- if (aCanDisplay) {\r
- bool aProcessed = false;\r
- FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);\r
- if (aFeature.get()) {\r
- bool aConstraintDisplayed = canDisplayConstraint(aFeature, PartSet_Tools::Any, aProcessed);\r
- if (aProcessed)\r
- aCanDisplay = aConstraintDisplayed;\r
- }\r
- }\r
-\r
- return aCanDisplay;\r
-}\r
-\r
-bool PartSet_SketcherMgr::canDisplayConstraint(const FeaturePtr& theFeature,\r
- const PartSet_Tools::ConstraintVisibleState& theState,\r
- bool& isProcessed) const\r
-{\r
- bool aSwitchedOn = true;\r
-\r
- const QStringList& aConstrIds = constraintsIdList();\r
-\r
- std::string aKind = theFeature->getKind();\r
- if (aConstrIds.contains(QString(aKind.c_str()))) {\r
- bool isTypedConstraint = false;\r
-\r
- switch (theState) {\r
- case PartSet_Tools::Dimensional: {\r
- bool isDistance = isDistanceKind(aKind);\r
- if (isDistance) {\r
- isProcessed = true;\r
- aSwitchedOn = myIsConstraintsShown[theState];\r
- }\r
- }\r
- break;\r
- case PartSet_Tools::Geometrical: {\r
- bool isGeometrical = !isDistanceKind(aKind);\r
- if (isGeometrical) {\r
- isProcessed = true;\r
- aSwitchedOn = myIsConstraintsShown[theState];\r
- }\r
- }\r
- break;\r
- case PartSet_Tools::Any: {\r
- isProcessed = true;\r
- bool isDistance = isDistanceKind(aKind);\r
- if (isDistance)\r
- aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Dimensional];\r
- else\r
- aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Geometrical];\r
- }\r
- break;\r
- default:\r
- break;\r
- }\r
- }\r
- return aSwitchedOn;\r
-}\r
-\r
-/*void PartSet_SketcherMgr::processHiddenObject(const std::list<ObjectPtr>& theObjects)\r
-{\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (aFOperation && myCurrentSketch.get()) {\r
- // find results of the current operation\r
- // these results should not be proposed to be deleted\r
- FeaturePtr anOperationFeature = aFOperation->feature();\r
- std::list<ResultPtr> anOperationResultList = anOperationFeature->results();\r
- std::set<ResultPtr> anOperationResults;\r
- std::list<ResultPtr>::const_iterator aRIt = anOperationResultList.begin(),\r
- aRLast = anOperationResultList.end();\r
- for (; aRIt != aRLast; aRIt++)\r
- anOperationResults.insert(*aRIt);\r
-\r
- std::set<FeaturePtr> anObjectsToBeDeleted;\r
- QStringList anObjectsToBeDeletedNames;\r
- std::list<ObjectPtr>::const_iterator anIt = theObjects.begin(), aLast = theObjects.end();\r
- for (; anIt != aLast; anIt++) {\r
- ObjectPtr anObject = *anIt;\r
- bool aCanErase = true;\r
- // when the sketch operation is active, results of sketch sub-feature can not be hidden\r
- ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);\r
- // the result is found between current feature results\r
- if (anOperationResults.find(aResult) != anOperationResults.end())\r
- continue;\r
-\r
- if (aResult.get()) {\r
- // Display sketcher objects\r
- for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {\r
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);\r
- std::list<ResultPtr> aResults = aFeature->results();\r
- std::list<ResultPtr>::const_iterator anIt;\r
- for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {\r
- aCanErase = *anIt != aResult;\r
- }\r
- }\r
- }\r
- if (!aCanErase) {\r
- FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);\r
- if (aFeature.get() && anObjectsToBeDeleted.find(aFeature) == anObjectsToBeDeleted.end()) {\r
- anObjectsToBeDeleted.insert(aFeature);\r
- anObjectsToBeDeletedNames.append(aFeature->name().c_str());\r
- }\r
- }\r
- }\r
- if (!anObjectsToBeDeleted.empty()) {\r
- QString aFeatureNames = anObjectsToBeDeletedNames.join(", ");\r
- QString aMessage = tr("The following features have incorrect presentation and \\r
-will be hidden: %1. Would you like to delete them?")\r
- .arg(aFeatureNames);\r
- int anAnswer = QMessageBox::question(qApp->activeWindow(), tr("Features hide"),\r
- aMessage, QMessageBox::Ok | QMessageBox::Cancel,\r
- QMessageBox::Cancel);\r
- if (anAnswer == QMessageBox::Ok) {\r
- QObjectPtrList anObjects;\r
- std::set<FeaturePtr>::const_iterator anIt = anObjectsToBeDeleted.begin(),\r
- aLast = anObjectsToBeDeleted.end();\r
- for (; anIt != aLast; anIt++)\r
- anObjects.append(*anIt);\r
- SessionPtr aMgr = ModelAPI_Session::get();\r
- DocumentPtr aDoc = aMgr->activeDocument();\r
- bool aIsOp = aMgr->isOperation();\r
- if (!aIsOp)\r
- aMgr->startOperation();\r
- workshop()->deleteFeatures(anObjects);\r
- //static Events_ID aDeletedEvent = Events_Loop::eventByName(EVENT_OBJECT_DELETED);\r
- //static Events_ID aRedispEvent = Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY);\r
- //Events_Loop::loop()->flush(aDeletedEvent);\r
- //Events_Loop::loop()->flush(aRedispEvent);\r
-\r
- if (!aIsOp)\r
- aMgr->finishOperation();\r
- }\r
- }\r
- }\r
-}*/\r
-\r
-bool PartSet_SketcherMgr::canDisplayCurrentCreatedFeature() const\r
-{\r
- bool aCanDisplay = myIsMouseOverWindow;\r
- if (!aCanDisplay) {\r
- ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();\r
- if (anActiveWidget)\r
- aCanDisplay = anActiveWidget->getValueState() == ModuleBase_ModelWidget::Stored;\r
- }\r
- return aCanDisplay;\r
-}\r
-\r
-bool PartSet_SketcherMgr::canChangeCursor(ModuleBase_Operation* theOperation) const\r
-{\r
- return isNestedCreateOperation(theOperation, activeSketch()) ||\r
- myModule->sketchReentranceMgr()->isInternalEditActive();\r
-}\r
-\r
-const QMap<PartSet_Tools::ConstraintVisibleState, bool>& PartSet_SketcherMgr::showConstraintStates()\r
-{\r
- return myIsConstraintsShown;\r
-}\r
-\r
-bool PartSet_SketcherMgr::isObjectOfSketch(const ObjectPtr& theObject) const\r
-{\r
- bool isFoundObject = false;\r
-\r
- FeaturePtr anObjectFeature = ModelAPI_Feature::feature(theObject);\r
- if (anObjectFeature.get()) {\r
- int aSize = myCurrentSketch->numberOfSubs();\r
- for (int i = 0; i < myCurrentSketch->numberOfSubs() && !isFoundObject; i++) {\r
- FeaturePtr aCurrentFeature = myCurrentSketch->subFeature(i);\r
- isFoundObject = myCurrentSketch->subFeature(i) == anObjectFeature;\r
- }\r
- }\r
- return isFoundObject;\r
-}\r
-\r
-void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)\r
-{\r
- if (myPlaneFilter.IsNull()) \r
- myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();\r
-\r
- myPlaneFilter->setPlane(thePln);\r
-}\r
-\r
-bool PartSet_SketcherMgr::setDistanceValueByPreselection(ModuleBase_Operation* theOperation,\r
- ModuleBase_IWorkshop* theWorkshop,\r
- bool& theCanCommitOperation)\r
-{\r
- bool isValueAccepted = false;\r
- theCanCommitOperation = false;\r
-\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (theOperation);\r
- FeaturePtr aFeature = aFOperation->feature();\r
- // editor is shown only if all attribute references are filled by preseletion\r
- bool anAllRefAttrInitialized = true;\r
-\r
- std::list<AttributePtr> aRefAttrs = aFeature->data()->attributes(\r
- ModelAPI_AttributeRefAttr::typeId());\r
- std::list<AttributePtr>::const_iterator anIt = aRefAttrs.begin(), aLast = aRefAttrs.end();\r
- for (; anIt != aLast && anAllRefAttrInitialized; anIt++) {\r
- anAllRefAttrInitialized = (*anIt)->isInitialized();\r
- }\r
- if (anAllRefAttrInitialized) {\r
- // Activate dimension value editing on double click\r
- ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();\r
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();\r
- // Find corresponded widget to activate value editing\r
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {\r
- if (aWgt->attributeID() == "ConstraintValue") {\r
- // the featue should be displayed in order to find the AIS text position,\r
- // the place where the editor will be shown\r
- aFeature->setDisplayed(true);\r
- /// the execute is necessary to perform in the feature compute for flyout position\r
- aFeature->execute();\r
-\r
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_CREATED));\r
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));\r
-\r
- PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);\r
- if (anEditor) {\r
- int aX = 0, anY = 0;\r
-\r
- XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(theWorkshop);\r
- XGUI_Displayer* aDisplayer = aWorkshop->displayer();\r
- AISObjectPtr anAIS = aDisplayer->getAISObject(aFeature);\r
- Handle(AIS_InteractiveObject) anAISIO;\r
- if (anAIS.get() != NULL) {\r
- anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();\r
- }\r
- if (anAIS.get() != NULL) {\r
- Handle(AIS_InteractiveObject) anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();\r
-\r
- if (!anAISIO.IsNull()) {\r
- Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAISIO);\r
- if (!aDim.IsNull()) {\r
- gp_Pnt aPosition = aDim->GetTextPosition();\r
-\r
- ModuleBase_IViewer* aViewer = aWorkshop->viewer();\r
- Handle(V3d_View) aView = aViewer->activeView();\r
- int aCX, aCY;\r
- aView->Convert(aPosition.X(), aPosition.Y(), aPosition.Z(), aCX, aCY);\r
-\r
- QWidget* aViewPort = aViewer->activeViewPort();\r
- QPoint aGlPoint = aViewPort->mapToGlobal(QPoint(aCX, aCY));\r
- aX = aGlPoint.x();\r
- anY = aGlPoint.y();\r
- }\r
- }\r
- anEditor->setCursorPosition(aX, anY);\r
- isValueAccepted = anEditor->showPopupEditor(false);\r
- theCanCommitOperation = true;\r
- }\r
- }\r
- }\r
- }\r
- }\r
- return isValueAccepted;\r
-}\r
-\r
-void PartSet_SketcherMgr::getSelectionOwners(const FeaturePtr& theFeature,\r
- const FeaturePtr& theSketch,\r
- ModuleBase_IWorkshop* theWorkshop,\r
- const FeatureToSelectionMap& theSelection,\r
- SelectMgr_IndexedMapOfOwner& theOwnersToSelect)\r
-{\r
- if (theFeature.get() == NULL)\r
- return;\r
-\r
- FeatureToSelectionMap::const_iterator anIt = theSelection.find(theFeature);\r
- std::set<AttributePtr> aSelectedAttributes = anIt.value().first;\r
- std::set<ResultPtr> aSelectedResults = anIt.value().second;\r
-\r
- ModuleBase_IViewer* aViewer = theWorkshop->viewer();\r
-\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);\r
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();\r
-\r
- // 1. found the feature's owners. Check the AIS objects of the constructions\r
- AISObjectPtr aAISObj = aDisplayer->getAISObject(theFeature);\r
- if (aAISObj.get() != NULL && aSelectedAttributes.empty() && aSelectedResults.empty()) {\r
- Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();\r
-\r
- SelectMgr_IndexedMapOfOwner aSelectedOwners;\r
- aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);\r
- for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {\r
- Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);\r
- if (!anOwner.IsNull())\r
- theOwnersToSelect.Add(anOwner);\r
- }\r
- }\r
-\r
- // 2. found the feature results's owners\r
- std::list<ResultPtr> aResults = theFeature->results();\r
- std::list<ResultPtr>::const_iterator aIt;\r
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)\r
- {\r
- ResultPtr aResult = *aIt;\r
- AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);\r
- if (aAISObj.get() == NULL)\r
- continue; \r
- Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();\r
-\r
- SelectMgr_IndexedMapOfOwner aSelectedOwners; \r
- aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);\r
- for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {\r
- Handle(StdSelect_BRepOwner) anOwner = Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));\r
- if ( anOwner.IsNull() || !anOwner->HasShape() )\r
- continue;\r
- const TopoDS_Shape& aShape = anOwner->Shape();\r
- TopAbs_ShapeEnum aShapeType = aShape.ShapeType();\r
- if (aShapeType == TopAbs_VERTEX) {\r
- AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);\r
- if (aPntAttr.get() != NULL &&\r
- aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end()) {\r
- theOwnersToSelect.Add(anOwner);\r
- }\r
- }\r
- else if (aShapeType == TopAbs_EDGE) {\r
- bool aFound = aSelectedResults.find(aResult) != aSelectedResults.end();\r
- if (aSelectedResults.find(aResult) != aSelectedResults.end() &&\r
- theOwnersToSelect.FindIndex(anOwner) <= 0)\r
- theOwnersToSelect.Add(anOwner);\r
- }\r
- }\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)\r
-{\r
- if (isToConnect) {\r
- connect(theWidget, SIGNAL(beforeValuesChanged()),\r
- this, SLOT(onBeforeValuesChangedInPropertyPanel()));\r
- connect(theWidget, SIGNAL(afterValuesChanged()),\r
- this, SLOT(onAfterValuesChangedInPropertyPanel()));\r
- }\r
- else {\r
- disconnect(theWidget, SIGNAL(beforeValuesChanged()),\r
- this, SLOT(onBeforeValuesChangedInPropertyPanel()));\r
- disconnect(theWidget, SIGNAL(afterValuesChanged()),\r
- this, SLOT(onAfterValuesChangedInPropertyPanel()));\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::widgetStateChanged(int thePreviousState)\r
-{\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (aFOperation) {\r
- if (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||\r
- isNestedSketchOperation(aFOperation) &&\r
- thePreviousState == ModuleBase_ModelWidget::ModifiedInPP) {\r
- FeaturePtr aFeature = aFOperation->feature();\r
- visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));\r
- }\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::customizePresentation(const ObjectPtr& theObject)\r
-{\r
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>\r
- (getCurrentOperation());\r
- if (aFOperation && (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||\r
- isNestedSketchOperation(aFOperation)))\r
- SketcherPrs_Tools::sendExpressionShownEvent(myIsConstraintsShown[PartSet_Tools::Expressions]);\r
-\r
- // update entities selection priorities\r
- FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);\r
- if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {\r
- // update priority for feature\r
- updateSelectionPriority(aFeature, aFeature);\r
- // update priority for results of the feature\r
- std::list<ResultPtr> aResults = aFeature->results();\r
- std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLastIt = aResults.end();\r
- for (; anIt != aLastIt; anIt++)\r
- updateSelectionPriority(*anIt, aFeature);\r
- }\r
-}\r
-\r
-ModuleBase_Operation* PartSet_SketcherMgr::getCurrentOperation() const\r
-{\r
- return myModule->workshop()->currentOperation();\r
-}\r
-\r
-//**************************************************************\r
-ModuleBase_ModelWidget* PartSet_SketcherMgr::getActiveWidget() const\r
-{\r
- ModuleBase_ModelWidget* aWidget = 0;\r
- ModuleBase_Operation* anOperation = getCurrentOperation();\r
- if (anOperation) {\r
- ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();\r
- if (aPanel)\r
- aWidget = aPanel->activeWidget();\r
- }\r
- return aWidget;\r
-}\r
-\r
-void PartSet_SketcherMgr::visualizeFeature(const FeaturePtr& theFeature,\r
- const bool isEditOperation,\r
- const bool isToDisplay,\r
- const bool isFlushRedisplay)\r
-{\r
- #ifdef DEBUG_DO_NOT_BY_ENTER\r
- return;\r
- #endif\r
-\r
- if (isEditOperation || !theFeature.get())\r
- return;\r
-\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);\r
-\r
- // 1. change visibility of the object itself, here the presentable object is processed,\r
- // e.g. constraints features\r
- //FeaturePtr aFeature = aFOperation->feature();\r
- std::list<ResultPtr> aResults = theFeature->results();\r
- if (isToDisplay)\r
- theFeature->setDisplayed(true);\r
- else\r
- theFeature->setDisplayed(false);\r
-\r
- // change visibility of the object results, e.g. non-constraint features\r
- std::list<ResultPtr>::const_iterator aIt;\r
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {\r
- if (isToDisplay) {\r
- (*aIt)->setDisplayed(true);\r
- }\r
- else {\r
- (*aIt)->setDisplayed(false);\r
- }\r
- }\r
- if (isFlushRedisplay)\r
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));\r
-}\r
-\r
-void PartSet_SketcherMgr::storeSelection(const bool theHighlightedOnly)\r
-{\r
- if (!myCurrentSketch.get())\r
- return;\r
-\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- ModuleBase_ISelection* aSelect = aWorkshop->selection();\r
- QList<ModuleBase_ViewerPrsPtr> aStoredPrs = aSelect->getHighlighted();\r
-\r
- QList<FeaturePtr> aFeatureList;\r
- if (!theHighlightedOnly) {\r
- QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected(\r
- ModuleBase_ISelection::AllControls);\r
- aStoredPrs.append(aSelected);\r
- }\r
-\r
- // 1. it is necessary to save current selection in order to restore it after the features moving\r
- myCurrentSelection.clear();\r
-\r
- QList<ModuleBase_ViewerPrsPtr>::const_iterator anIt = aStoredPrs.begin(), aLast = aStoredPrs.end();\r
-\r
- CompositeFeaturePtr aSketch = activeSketch();\r
- for (; anIt != aLast; anIt++) {\r
- ModuleBase_ViewerPrsPtr aPrs = *anIt;\r
- ObjectPtr anObject = aPrs->object();\r
- if (!anObject.get())\r
- continue;\r
-\r
- ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);\r
- FeaturePtr aFeature;\r
- if (aResult.get())\r
- aFeature = ModelAPI_Feature::feature(aResult);\r
- else\r
- aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);\r
-\r
-\r
- std::set<AttributePtr> aSelectedAttributes;\r
- std::set<ResultPtr> aSelectedResults;\r
- if (myCurrentSelection.find(aFeature) != myCurrentSelection.end()) {\r
- std::pair<std::set<AttributePtr>, std::set<ResultPtr> > aPair = myCurrentSelection.find(aFeature).value();\r
- aSelectedAttributes = aPair.first;\r
- aSelectedResults = aPair.second;\r
- }\r
-\r
- Handle(SelectMgr_EntityOwner) anOwner = aPrs->owner();\r
- if (aResult.get()) {\r
- getAttributesOrResults(anOwner, aFeature, aSketch, aResult,\r
- aSelectedAttributes, aSelectedResults);\r
- }\r
- else {\r
- std::list<ResultPtr> aResults = aFeature->results();\r
- std::list<ResultPtr>::const_iterator aIt;\r
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {\r
- ResultPtr aResult = *aIt;\r
- getAttributesOrResults(anOwner, aFeature, aSketch, aResult,\r
- aSelectedAttributes, aSelectedResults);\r
- }\r
- }\r
- myCurrentSelection[aFeature] = std::make_pair(aSelectedAttributes, aSelectedResults);\r
- }\r
- //qDebug(QString(" storeSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());\r
-}\r
-\r
-void PartSet_SketcherMgr::restoreSelection()\r
-{\r
- if (!myCurrentSketch.get())\r
- return;\r
-\r
- //qDebug(QString("restoreSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);\r
- FeatureToSelectionMap::const_iterator aSIt = myCurrentSelection.begin(),\r
- aSLast = myCurrentSelection.end();\r
- SelectMgr_IndexedMapOfOwner anOwnersToSelect;\r
- for (; aSIt != aSLast; aSIt++) {\r
- anOwnersToSelect.Clear();\r
- getSelectionOwners(aSIt.key(), myCurrentSketch, aWorkshop, myCurrentSelection,\r
- anOwnersToSelect);\r
- aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::onShowConstraintsToggle(int theType, bool theState)\r
-{\r
- PartSet_Tools::ConstraintVisibleState aType = (PartSet_Tools::ConstraintVisibleState)theType;\r
-\r
- updateBySketchParameters(aType, theState);\r
-}\r
-\r
-void PartSet_SketcherMgr::updateBySketchParameters(\r
- const PartSet_Tools::ConstraintVisibleState& theType,\r
- bool theState)\r
-{\r
- if (myCurrentSketch.get() == NULL)\r
- return;\r
-\r
- bool aPrevState = myIsConstraintsShown[theType];\r
- myIsConstraintsShown[theType] = theState;\r
-\r
- switch (theType) {\r
- case PartSet_Tools::Geometrical:\r
- case PartSet_Tools::Dimensional: {\r
- if (aPrevState != theState) {\r
- ModuleBase_IWorkshop* aWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);\r
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {\r
- FeaturePtr aSubFeature = myCurrentSketch->subFeature(i);\r
- bool aProcessed = false;\r
- bool aConstraintDisplayed = canDisplayConstraint(aSubFeature, theType, aProcessed);\r
- if (aProcessed)\r
- aSubFeature->setDisplayed(aConstraintDisplayed);\r
- }\r
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));\r
- }\r
- }\r
- break;\r
- case PartSet_Tools::Expressions: {\r
- if (aPrevState != theState) {\r
- /// call all sketch features redisplay, the expression state will be corrected in customize\r
- /// of distance presentation\r
- Events_ID anEventId = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);\r
- PartSet_Tools::sendSubFeaturesEvent(myCurrentSketch, anEventId);\r
- }\r
- }\r
- break;\r
- }\r
-}\r
-\r
-void PartSet_SketcherMgr::updateSelectionPriority(ObjectPtr theObject,\r
- FeaturePtr theFeature)\r
-{\r
- if (!theObject.get() || !theFeature.get())\r
- return;\r
-\r
- AISObjectPtr anAIS = workshop()->displayer()->getAISObject(theObject);\r
- Handle(AIS_InteractiveObject) anAISIO;\r
- if (anAIS.get() != NULL) {\r
- anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();\r
- }\r
-\r
- if (!anAISIO.IsNull()) { // the presentation for the object is visualized\r
- int anAdditionalPriority = 0;\r
- // current feature\r
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =\r
- std::dynamic_pointer_cast<SketchPlugin_Feature>(theFeature);\r
- if (aSPFeature.get() != NULL) {\r
- // 1. Vertices\r
- // 2. Simple segments\r
- // 3. External objects (violet color)\r
- // 4. Auxiliary segments (dotted)\r
- // StdSelect_BRepSelectionTool::Load uses priority calculating:\r
- // Standard_Integer aPriority = (thePriority == -1) ? GetStandardPriority (theShape, theType) : thePriority;\r
- // Priority of Vertex is 8, edge(segment) is 7.\r
- // It might be not corrected as provides the condition above.\r
- bool isExternal = aSPFeature->isExternal();\r
- bool isAuxiliary = PartSet_Tools::isAuxiliarySketchEntity(aSPFeature);\r
- // current feature\r
- if (!isExternal && !isAuxiliary)\r
- anAdditionalPriority = 30;\r
- // external feature\r
- if (isExternal)\r
- anAdditionalPriority = 20;\r
- // auxiliary feature\r
- if (isAuxiliary) {\r
- anAdditionalPriority = 10; /// auxiliary objects should have less priority that\r
- // edges/vertices of local selection on not-sketch objects\r
- }\r
- Handle(ModuleBase_ResultPrs) aResult = Handle(ModuleBase_ResultPrs)::DownCast(anAISIO);\r
- if (!aResult.IsNull()) {\r
- aResult->setAdditionalSelectionPriority(anAdditionalPriority);\r
- }\r
- }\r
- }\r
-}\r
-\r
-XGUI_Workshop* PartSet_SketcherMgr::workshop() const\r
-{\r
- ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();\r
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);\r
- return aConnector->workshop();\r
-}\r
-\r
-XGUI_OperationMgr* PartSet_SketcherMgr::operationMgr() const\r
-{\r
- return workshop()->operationMgr();\r
-}\r
-\r
+// Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+
+#include "PartSet_SketcherMgr.h"
+
+#include "PartSet_Filters.h"
+#include "PartSet_SketcherReentrantMgr.h"
+#include "PartSet_Module.h"
+#include "PartSet_MouseProcessor.h"
+#include "PartSet_Tools.h"
+#include "PartSet_WidgetSketchLabel.h"
+#include "PartSet_WidgetEditor.h"
+#include "PartSet_ResultSketchPrs.h"
+#include "PartSet_ExternalPointsMgr.h"
+#include "PartSet_PreviewSketchPlane.h"
+
+#include <XGUI_ModuleConnector.h>
+#include <XGUI_Displayer.h>
+#include <XGUI_Workshop.h>
+#include <XGUI_ContextMenuMgr.h>
+#include <XGUI_Selection.h>
+#include <XGUI_SelectionActivate.h>
+#include <XGUI_SelectionMgr.h>
+#include <XGUI_ModuleConnector.h>
+#include <XGUI_PropertyPanel.h>
+#include <XGUI_ViewerProxy.h>
+#include <XGUI_OperationMgr.h>
+#include <XGUI_ErrorMgr.h>
+#include <XGUI_Tools.h>
+
+#include <ModuleBase_IPropertyPanel.h>
+#include <ModuleBase_ISelection.h>
+#include <ModuleBase_IViewer.h>
+#include <ModuleBase_IWorkshop.h>
+#include <ModuleBase_IViewWindow.h>
+#include <ModuleBase_ModelWidget.h>
+#include <ModuleBase_Operation.h>
+#include <ModuleBase_OperationFeature.h>
+#include <ModuleBase_Operation.h>
+#include <ModuleBase_WidgetEditor.h>
+#include <ModuleBase_ViewerPrs.h>
+#include <ModuleBase_Tools.h>
+#include <ModuleBase_ResultPrs.h>
+#include <ModuleBase_ViewerFilters.h>
+
+#include <GeomDataAPI_Point2D.h>
+
+#include <GeomAPI_Shape.h>
+
+#include <Events_Loop.h>
+
+#include <SketchPlugin_Line.h>
+#include <SketchPlugin_Sketch.h>
+#include <SketchPlugin_Point.h>
+#include <SketchPlugin_Arc.h>
+#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_ConstraintLength.h>
+#include <SketchPlugin_ConstraintDistance.h>
+#include <SketchPlugin_ConstraintParallel.h>
+#include <SketchPlugin_ConstraintPerpendicular.h>
+#include <SketchPlugin_ConstraintRadius.h>
+#include <SketchPlugin_ConstraintRigid.h>
+#include <SketchPlugin_ConstraintHorizontal.h>
+#include <SketchPlugin_ConstraintVertical.h>
+#include <SketchPlugin_ConstraintEqual.h>
+#include <SketchPlugin_ConstraintTangent.h>
+#include <SketchPlugin_ConstraintCoincidence.h>
+#include <SketchPlugin_Fillet.h>
+#include <SketchPlugin_ConstraintMirror.h>
+#include <SketchPlugin_ConstraintAngle.h>
+#include <SketchPlugin_ConstraintCollinear.h>
+#include <SketchPlugin_ConstraintMiddle.h>
+#include <SketchPlugin_MultiRotation.h>
+#include <SketchPlugin_MultiTranslation.h>
+#include <SketchPlugin_IntersectionPoint.h>
+#include <SketchPlugin_Projection.h>
+#include <SketchPlugin_ConstraintDistanceAlongDir.h>
+#include <SketchPlugin_ConstraintDistanceHorizontal.h>
+#include <SketchPlugin_ConstraintDistanceVertical.h>
+
+#include <SketcherPrs_Tools.h>
+
+#include <SelectMgr_IndexedMapOfOwner.hxx>
+#include <StdSelect_BRepOwner.hxx>
+
+//#include <AIS_DimensionSelectionMode.hxx>
+#include <AIS_Shape.hxx>
+#include <AIS_Dimension.hxx>
+
+#include <ModelAPI_Events.h>
+#include <ModelAPI_Session.h>
+#include <ModelAPI_AttributeString.h>
+
+#include <ModelAPI_Validator.h>
+#include <ModelAPI_Tools.h>
+
+#include <QMouseEvent>
+#include <QApplication>
+#include <QCursor>
+#include <QMessageBox>
+#include <QMainWindow>
+
+//#define DEBUG_DO_NOT_BY_ENTER
+//#define DEBUG_SKETCHER_ENTITIES
+//#define DEBUG_SKETCH_ENTITIES_ON_MOVE
+
+//#define DEBUG_CURSOR
+
+/// Fills attribute and result lists by the selected owner. In case if the attribute is found,
+/// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge,
+/// put the function result as is to the list of results.
+/// \param theOwner a viewer selected owner
+/// \param theFeature a feature, where the attribute is searched
+/// \param theSketch a current sketch
+/// \param theSelectedAttribute an output list of attributes
+/// \param theSelectedResults an output list of edge results
+void getAttributesOrResults(const Handle(SelectMgr_EntityOwner)& theOwner,
+ const FeaturePtr& theFeature, const FeaturePtr& theSketch,
+ const ResultPtr& theResult,
+ std::set<AttributePtr>& theSelectedAttributes,
+ std::set<ResultPtr>& theSelectedResults,
+ TopTools_MapOfShape& theShapes)
+{
+ Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(theOwner);
+ if (aBRepOwner.IsNull())
+ return;
+ Handle(AIS_InteractiveObject) anIO = Handle(AIS_InteractiveObject)::DownCast(
+ aBRepOwner->Selectable());
+ if (aBRepOwner->HasShape()) {
+ const TopoDS_Shape& aShape = aBRepOwner->Shape();
+ theShapes.Add(aShape);
+ TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
+ if (aShapeType == TopAbs_VERTEX) {
+ AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature,
+ aShape, theSketch);
+ if (aPntAttr.get() != NULL)
+ theSelectedAttributes.insert(aPntAttr);
+ }
+ else if (aShapeType == TopAbs_EDGE &&
+ theSelectedResults.find(theResult) == theSelectedResults.end()) {
+ theSelectedResults.insert(theResult);
+ }
+ }
+}
+
+PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)
+ : QObject(theModule), myModule(theModule), myIsEditLaunching(false), myIsDragging(false),
+ myDragDone(false), myIsMouseOverWindow(false),
+ myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
+ myIsPopupMenuActive(false), myExternalPointsMgr(0)
+{
+ ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
+ ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
+
+ myPreviousDrawModeEnabled = true;//aViewer->isSelectionEnabled();
+
+ connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
+ this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
+
+ connect(aViewer, SIGNAL(mouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)),
+ this, SLOT(onMouseReleased(ModuleBase_IViewWindow*, QMouseEvent*)));
+
+ connect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),
+ this, SLOT(onMouseMoved(ModuleBase_IViewWindow*, QMouseEvent*)));
+
+ connect(aViewer, SIGNAL(mouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)),
+ this, SLOT(onMouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)));
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ connect(aWorkshop, SIGNAL(applicationStarted()), this, SLOT(onApplicationStarted()));
+
+ myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
+ myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
+ myIsConstraintsShown[PartSet_Tools::Expressions] = false;
+
+ mySketchPlane = new PartSet_PreviewSketchPlane();
+
+ registerSelectionFilter(SF_SketchCirclePointFilter, new PartSet_CirclePointFilter(anIWorkshop));
+ registerSelectionFilter(SF_SketchPlaneFilter, new ModuleBase_ShapeInPlaneFilter());
+}
+
+PartSet_SketcherMgr::~PartSet_SketcherMgr()
+{
+ delete mySketchPlane;
+}
+
+void PartSet_SketcherMgr::onEnterViewPort()
+{
+ // 1. if the mouse over window, update the next flag. Do not perform update visibility of
+ // created feature because it should be done in onMouseMove(). Some widgets watch
+ // the mouse move and use the cursor position to update own values. If the presentaion is
+ // redisplayed before this update, the feature presentation jumps from reset value to current.
+ myIsMouseOverWindow = true;
+
+ #ifdef DEBUG_DO_NOT_BY_ENTER
+ return;
+ #endif
+
+ if (canChangeCursor(getCurrentOperation())) {
+ QCursor* aCurrentCursor = QApplication::overrideCursor();
+ if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
+ QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
+#ifdef DEBUG_CURSOR
+ qDebug("onEnterViewPort() : Qt::CrossCursor");
+#endif
+ }
+ }
+
+ if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
+ return;
+
+ operationMgr()->onValidateOperation();
+
+ // we need change displayed state of the current operation feature
+ // if the feature is presentable, e.g. distance construction. It has no results, so workshop does
+ // not accept a signal about the result created. Nothing is shown until mouse is moved out/in view
+ // port. If the isDisplayed flag is true, the presentable feature is displayed as soon as the
+ // presentation becomes valid and redisplay happens
+ //ModuleBase_Operation* aOperation = getCurrentOperation();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get() && aFeature->data()->isValid()) {
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature), false);
+ }
+ }
+}
+
+void PartSet_SketcherMgr::onLeaveViewPort()
+{
+ myIsMouseOverViewProcessed = false;
+ myIsMouseOverWindow = false;
+
+ #ifdef DEBUG_DO_NOT_BY_ENTER
+ return;
+ #endif
+
+ if (canChangeCursor(getCurrentOperation())) {
+ QApplication::restoreOverrideCursor();
+#ifdef DEBUG_CURSOR
+ qDebug("onLeaveViewPort() : None");
+#endif
+ }
+
+ if (!isNestedCreateOperation(getCurrentOperation(), activeSketch()))
+ return;
+
+ // the method should be performed if the popup menu is called,
+ // the reset of the current widget should not happen
+ if (myIsPopupMenuActive)
+ return;
+
+ // it is important to validate operation here only if sketch entity create operation is active
+ // because at this operation we reacts to the mouse leave/enter view port
+ operationMgr()->onValidateOperation();
+
+ // 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ // disable the viewer update in order to avoid visualization of redisplayed feature in viewer
+ // obtained after reset value
+ bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ if (anActiveWidget)
+ anActiveWidget->reset();
+
+ // hides the presentation of the current operation feature
+ // the feature is to be erased here, but it is correct to call canDisplayObject because
+ // there can be additional check (e.g. editor widget in distance constraint)
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
+ // we should update viewer after the presentation are hidden in the viewer
+ // otherwise the reset presentation(line) appears in the viewer(by quick move from viewer to PP)
+ aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
+}
+
+/*
+//Temporary commented as we do not modify values in property panel
+void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()
+{
+ if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||
+ myModule->sketchReentranceMgr()->isInternalEditActive())
+ return;
+ // it is necessary to save current selection in order to restore it after the values are modifed
+ storeSelection(ST_SelectAndHighlightType);
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ myPreviousUpdateViewerEnabled = aDisplayer->enableUpdateViewer(false);
+}
+
+void PartSet_SketcherMgr::onAfterValuesChangedInPropertyPanel()
+{
+ if (!isNestedEditOperation(getCurrentOperation(), myModule->sketchMgr()->activeSketch()) ||
+ myModule->sketchReentranceMgr()->isInternalEditActive()) {
+ myModule->sketchReentranceMgr()->updateInternalEditActiveState();
+ return;
+ }
+ // it is necessary to restore current selection in order to restore it after values are modified
+ restoreSelection();
+ myCurrentSelection.clear();
+
+ // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
+ // viewer happens by deselect/select the modified objects. The flag should be restored after
+ // the selection processing. The update viewer should be also called.
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ aDisplayer->enableUpdateViewer(myPreviousUpdateViewerEnabled);
+ aDisplayer->updateViewer();
+}
+*/
+
+void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+{
+ // Clear dragging mode
+ myIsDragging = false;
+
+ if (myModule->sketchReentranceMgr()->processMousePressed(theWnd, theEvent))
+ return;
+ //get2dPoint(theWnd, theEvent, myClickedPoint);
+ if (!(theEvent->buttons() & Qt::LeftButton))
+ return;
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ ModuleBase_IViewer* aViewer = aWorkshop->viewer();
+ if (!aViewer->canDragByMouse())
+ return;
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (!aFOperation)
+ return;
+
+ if (aFOperation->isEditOperation()) {
+ // If the current widget is a selector, do nothing, it processes the mouse press
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ if(anActiveWidget && anActiveWidget->isViewerSelector()) {
+ return;
+ }
+ }
+
+ // Use only for sketch operations
+ if (myCurrentSketch) {
+ if (!PartSet_Tools::sketchPlane(myCurrentSketch))
+ return;
+
+ bool isSketcher = isSketchOperation(aFOperation);
+ bool isSketchOpe = isNestedSketchOperation(aFOperation);
+
+ // Avoid non-sketch operations
+ if ((!isSketchOpe) && (!isSketcher))
+ return;
+
+ bool isEditing = aFOperation->isEditOperation();
+
+ // Ignore creation sketch operation
+ if ((!isSketcher) && (!isEditing))
+ return;
+
+ Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+ // Remember highlighted objects for editing
+ ModuleBase_ISelection* aSelect = aWorkshop->selection();
+
+ bool aHasShift = (theEvent->modifiers() & Qt::ShiftModifier);
+ storeSelection(aHasShift ? ST_SelectAndHighlightType : ST_HighlightType, myCurrentSelection);
+
+ if (myCurrentSelection.empty()) {
+ if (isSketchOpe && (!isSketcher))
+ // commit previous operation
+ if (!aFOperation->commit())
+ aFOperation->abort();
+ return;
+ }
+ // Init flyout point for radius rotation
+ FeaturePtr aFeature = myCurrentSelection.begin().key();
+
+ get2dPoint(theWnd, theEvent, myCurrentPoint);
+ if (isSketcher) {
+ myIsDragging = true;
+ myDragDone = false;
+
+ myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
+ launchEditing();
+ if (aFeature.get() != NULL) {
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSPFeature.get() &&
+ (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
+ aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
+ DataPtr aData = aSPFeature->data();
+ AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
+ std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
+ aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
+ }
+ }
+ } else if (isSketchOpe && isEditing) {
+ // If selected another object commit current result
+ bool aPrevLaunchingState = myIsEditLaunching;
+ /// store editing state for Edit operation in order to do not clear highlight by restart
+ /// of edit operation.
+ /// Internal edit should not be stored as editing operation as the result will be a
+ /// creation operation, where previous selection should not be used(and will be cleared)
+ myIsEditLaunching = !myModule->sketchReentranceMgr()->isInternalEditActive();
+ aFOperation->commit();
+
+ myIsDragging = true;
+ myDragDone = false;
+
+ myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
+ launchEditing();
+ myIsEditLaunching = aPrevLaunchingState;
+ if (aFeature.get() != NULL) {
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSPFeature.get() &&
+ (aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
+ aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
+ DataPtr aData = aSPFeature->data();
+ AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
+ std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
+ aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
+ }
+ }
+ }
+ }
+}
+
+void PartSet_SketcherMgr::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+{
+ bool aWasDragging = myIsDragging;
+ myIsDragging = false;
+
+ if (myModule->sketchReentranceMgr()->processMouseReleased(theWnd, theEvent))
+ return;
+
+ // if mouse is pressed when it was over view and at release the mouse is out of view, do nothing
+ if (!myIsMouseOverViewProcessed)
+ return;
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ ModuleBase_IViewer* aViewer = aWorkshop->viewer();
+ if (!aViewer->canDragByMouse())
+ return;
+ ModuleBase_Operation* aOp = getCurrentOperation();
+ if (aOp) {
+ if (isNestedSketchOperation(aOp)) {
+ // Only for sketcher operations
+ if (aWasDragging) {
+ if (myDragDone) {
+ /// the previous selection is lost by mouse release in the viewer(Select method), but
+ /// it is still stored in myCurrentSelection. So, it is possible to restore selection
+ /// It is important for drag(edit with mouse) of sketch entities.
+ restoreSelection(myCurrentSelection);
+ myCurrentSelection.clear();
+ }
+ }
+ }
+ }
+
+ aWorkshop->viewer()->enableDrawMode(myPreviousDrawModeEnabled);
+
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
+ if (aProcessor)
+ aProcessor->mouseReleased(theWnd, theEvent);
+}
+
+void PartSet_SketcherMgr::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+{
+#ifdef DEBUG_SKETCH_ENTITIES_ON_MOVE
+ CompositeFeaturePtr aSketch = activeSketch();
+ if (aSketch.get()) {
+ std::cout << "mouse move SKETCH FEATURES [" << aSketch->numberOfSubs() << "]:" << std::endl;
+ QStringList anInfo;
+ for (int i = 0, aNbSubs = aSketch->numberOfSubs(); i < aNbSubs; i++) {
+ //std::cout << getFeatureInfo(aSketch->subFeature(i), false) << std::endl;
+ anInfo.append(ModuleBase_Tools::objectInfo(aSketch->subFeature(i)));
+ }
+ QString anInfoStr = anInfo.join("\n");
+ qDebug(QString("%1").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
+ }
+#endif
+
+ if (myModule->sketchReentranceMgr()->processMouseMoved(theWnd, theEvent))
+ return;
+
+ if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
+ // 1. perform the widget mouse move functionality and display the presentation
+ // the mouse move should be processed in the widget, if it can in order to visualize correct
+ // presentation. These widgets correct the feature attribute according to the mouse position
+ ModuleBase_ModelWidget* anActiveWidget = myModule->activeWidget();
+ PartSet_MouseProcessor* aProcessor = dynamic_cast<PartSet_MouseProcessor*>(anActiveWidget);
+ if (aProcessor)
+ aProcessor->mouseMoved(theWnd, theEvent);
+ if (!myIsMouseOverViewProcessed) {
+ myIsMouseOverViewProcessed = true;
+
+ // the feature is to be erased here, but it is correct to call canDisplayObject because
+ // there can be additional check (e.g. editor widget in distance constraint)
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
+ }
+ }
+ //myClickedPoint.clear();
+
+ if (myIsDragging) {
+ // 1. the current selection is saved in the mouse press method in order to restore it after
+ // moving
+ // 2. the enable selection in the viewer should be temporary switched off in order to ignore
+ // mouse press signal in the viewer(it call Select for AIS context and the dragged objects are
+ // deselected). This flag should be restored in the slot, processed the mouse release signal.
+
+ ModuleBase_Operation* aCurrentOperation = getCurrentOperation();
+ if (!aCurrentOperation)
+ return;
+ if (isSketchOperation(aCurrentOperation))
+ return; // No edit operation activated
+
+ Handle(V3d_View) aView = theWnd->v3dView();
+ gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
+ Point aMousePnt;
+ get2dPoint(theWnd, theEvent, aMousePnt);
+
+ std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition = std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(myCurrentPoint.myCurX, myCurrentPoint.myCurY));
+ std::shared_ptr<GeomAPI_Pnt2d> aCurrentPosition = std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(aMousePnt.myCurX, aMousePnt.myCurY));
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
+ // viewer happens by deselect/select the modified objects. The flag should be restored after
+ // the selection processing. The update viewer should be also called.
+ bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
+
+ static Events_ID aMoveEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);
+ //static Events_ID aUpdateEvent = Events_Loop::eventByName(EVENT_OBJECT_UPDATED);
+ FeatureToSelectionMap::const_iterator anIt = myCurrentSelection.begin(),
+ aLast = myCurrentSelection.end();
+ // 4. the features and attributes modification(move)
+ bool isModified = false;
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aFeature = anIt.key();
+
+ std::set<AttributePtr> anAttributes = anIt.value().myAttributes;
+ // Process selection by attribute: the priority to the attribute
+ if (!anAttributes.empty()) {
+ std::set<AttributePtr>::const_iterator anAttIt = anAttributes.begin(),
+ anAttLast = anAttributes.end();
+ for (; anAttIt != anAttLast; anAttIt++) {
+ AttributePtr anAttr = *anAttIt;
+ if (anAttr.get() == NULL)
+ continue;
+ std::string aAttrId = anAttr->id();
+ DataPtr aData = aFeature->data();
+ if (aData->isValid()) {
+ std::shared_ptr<GeomDataAPI_Point2D> aPoint =
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(aAttrId));
+ if (aPoint.get() != NULL) {
+ bool isImmutable = aPoint->setImmutable(true);
+
+ std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage = std::shared_ptr
+ <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
+ aMessage->setMovedAttribute(aPoint);
+ aMessage->setOriginalPosition(anOriginalPosition);
+ aMessage->setCurrentPosition(aCurrentPosition);
+ Events_Loop::loop()->send(aMessage);
+
+ isModified = true;
+ aPoint->setImmutable(isImmutable);
+ }
+ }
+ }
+ } else {
+ // Process selection by feature
+ std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSketchFeature) {
+ std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage = std::shared_ptr
+ <ModelAPI_ObjectMovedMessage>(new ModelAPI_ObjectMovedMessage(this));
+ aMessage->setMovedObject(aFeature);
+ aMessage->setOriginalPosition(anOriginalPosition);
+ aMessage->setCurrentPosition(aCurrentPosition);
+ Events_Loop::loop()->send(aMessage);
+ isModified = true;
+ }
+ }
+ }
+ // the modified state of the current operation should be updated if there are features, which
+ // were changed here
+ if (isModified) {
+ aCurrentOperation->onValuesChanged();
+ Events_Loop::loop()->flush(aMoveEvent); // up all move events - to be processed in the solver
+ }
+ //Events_Loop::loop()->flush(aUpdateEvent); // up update events - to redisplay presentations
+
+ // 5. it is necessary to save current selection in order to restore it after the features moving
+ restoreSelection(myCurrentSelection);
+ // 6. restore the update viewer flag and call this update
+ aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
+ aDisplayer->updateViewer();
+
+ myDragDone = true;
+ myCurrentPoint = aMousePnt;
+ }
+}
+
+void PartSet_SketcherMgr::onMouseDoubleClick(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation && aFOperation->isEditOperation()) {
+ std::string aId = aFOperation->id().toStdString();
+ if (isDistanceOperation(aFOperation))
+ {
+ // Activate dimension value editing on double click
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ // Find corresponded widget to activate value editing
+ foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
+ std::string anId = aWgt->attributeID();
+ if (anId == SketchPlugin_Constraint::VALUE() ||
+ anId == SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID() ||
+ anId == SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()) {
+ PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
+ if (anEditor)
+ anEditor->showPopupEditor();
+ return;
+ }
+ }
+ }
+ }
+}
+
+void PartSet_SketcherMgr::onApplicationStarted()
+{
+ ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ PartSet_SketcherReentrantMgr* aReentranceMgr = myModule->sketchReentranceMgr();
+
+ XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
+ if (aPropertyPanel) {
+ //connect(aPropertyPanel, SIGNAL(beforeWidgetActivated(ModuleBase_ModelWidget*)),
+ // this, SLOT(onBeforeWidgetActivated(ModuleBase_ModelWidget*)));
+
+ connect(aPropertyPanel, SIGNAL(noMoreWidgets(const std::string&)),
+ aReentranceMgr, SLOT(onNoMoreWidgets(const std::string&)));
+ //connect(aPropertyPanel, SIGNAL(widgetActivated(ModuleBase_ModelWidget*)),
+ // aReentranceMgr, SLOT(onWidgetActivated()));
+ }
+
+ XGUI_ViewerProxy* aViewerProxy = aWorkshop->viewer();
+ connect(aViewerProxy, SIGNAL(enterViewPort()), this, SLOT(onEnterViewPort()));
+ connect(aViewerProxy, SIGNAL(leaveViewPort()), this, SLOT(onLeaveViewPort()));
+
+ XGUI_ContextMenuMgr* aContextMenuMgr = aWorkshop->contextMenuMgr();
+ connect(aContextMenuMgr, SIGNAL(beforeContextMenu()), this, SLOT(onBeforeContextMenu()));
+ connect(aContextMenuMgr, SIGNAL(afterContextMenu()), this, SLOT(onAfterContextMenu()));
+}
+
+//void PartSet_SketcherMgr::onBeforeWidgetActivated(ModuleBase_ModelWidget* theWidget)
+//{
+ //if (!myClickedPoint.myIsInitialized)
+ // return;
+
+ //ModuleBase_Operation* aOperation = getCurrentOperation();
+ // the distance constraint feature should not use the clickedd point
+ // this is workaround in order to don't throw down the flyout point value,
+ // set by execute() method of these type of features
+ //if (isDistanceOperation(aOperation))
+ // return;
+
+ //PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(theWidget);
+ //if (aPnt2dWgt) {
+ // aPnt2dWgt->setPoint(myClickedPoint.myCurX, myClickedPoint.myCurY);
+ //}
+//}
+
+void PartSet_SketcherMgr::onBeforeContextMenu()
+{
+ myIsPopupMenuActive = true;
+}
+
+void PartSet_SketcherMgr::onAfterContextMenu()
+{
+ myIsPopupMenuActive = false;
+}
+
+void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
+ Point& thePoint)
+{
+ Handle(V3d_View) aView = theWnd->v3dView();
+ gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
+ double aX, anY;
+ PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, anY);
+ thePoint.setValue(aX, anY);
+}
+
+void PartSet_SketcherMgr::launchEditing()
+{
+ if (!myCurrentSelection.empty()) {
+ FeaturePtr aFeature = myCurrentSelection.begin().key();
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSPFeature) {
+ if (!aSPFeature->isExternal())
+ myModule->editFeature(aSPFeature);
+ else {
+ // need to edit a feature (Projection/IntersectionPoint),
+ // which produces current External feature
+ FeaturePtr aProducerFeature = PartSet_Tools::findRefsToMeFeature(aFeature,
+ SketchPlugin_Projection::ID());
+ if (!aProducerFeature.get())
+ aProducerFeature = PartSet_Tools::findRefsToMeFeature(aFeature,
+ SketchPlugin_IntersectionPoint::ID());
+ if (aProducerFeature.get())
+ myModule->editFeature(aProducerFeature);
+ }
+ }
+ }
+}
+
+bool PartSet_SketcherMgr::sketchSolverError()
+{
+ bool anError = false;
+ CompositeFeaturePtr aSketch = activeSketch();
+ if (aSketch.get()) {
+ AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());
+ anError = !aAttributeString->value().empty();
+ }
+ return anError;
+}
+
+QString PartSet_SketcherMgr::getFeatureError(const FeaturePtr& theFeature)
+{
+ QString anError;
+ if (!theFeature.get() || !theFeature->data()->isValid())
+ return anError;
+
+ CompositeFeaturePtr aSketch = activeSketch();
+ if (aSketch.get() && aSketch == theFeature) {
+ std::string aSolverError = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR())->value();
+ anError = ModuleBase_Tools::translate(aSketch->getKind(), aSolverError);
+ }
+ return anError;
+}
+
+void PartSet_SketcherMgr::clearClickedFlags()
+{
+ //myClickedPoint.clear();
+ myCurrentPoint.clear();
+}
+
+const QStringList& PartSet_SketcherMgr::replicationsIdList()
+{
+ static QStringList aReplicationIds;
+ if (aReplicationIds.size() == 0) {
+ aReplicationIds << SketchPlugin_ConstraintMirror::ID().c_str();
+ aReplicationIds << SketchPlugin_MultiRotation::ID().c_str();
+ aReplicationIds << SketchPlugin_MultiTranslation::ID().c_str();
+ }
+ return aReplicationIds;
+}
+
+const QStringList& PartSet_SketcherMgr::constraintsIdList()
+{
+ static QStringList aConstraintIds;
+ if (aConstraintIds.size() == 0) {
+ aConstraintIds << SketchPlugin_ConstraintLength::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintDistance::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintRigid::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintRadius::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintParallel::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintHorizontal::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintVertical::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintEqual::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintTangent::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintCoincidence::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintAngle::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintCollinear::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintMiddle::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintMirror::ID().c_str();
+ aConstraintIds << SketchPlugin_MultiTranslation::ID().c_str();
+ aConstraintIds << SketchPlugin_MultiRotation::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintDistanceAlongDir::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintDistanceHorizontal::ID().c_str();
+ aConstraintIds << SketchPlugin_ConstraintDistanceVertical::ID().c_str();
+ }
+ return aConstraintIds;
+}
+
+void PartSet_SketcherMgr::sketchSelectionModes(const CompositeFeaturePtr& theSketch,
+ QIntList& theModes)
+{
+ if (!theSketch.get() || !PartSet_Tools::sketchPlane(theSketch).get())
+ return;
+
+ theModes.append(SketcherPrs_Tools::Sel_Dimension_Text);
+ theModes.append(SketcherPrs_Tools::Sel_Dimension_Line);
+ theModes.append(SketcherPrs_Tools::Sel_Constraint);
+ theModes.append(TopAbs_VERTEX);
+ theModes.append(TopAbs_EDGE);
+}
+
+Handle(AIS_InteractiveObject) PartSet_SketcherMgr::createPresentation(const ResultPtr& theResult)
+{
+ Handle(AIS_InteractiveObject) aPrs;
+
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theResult);
+ if (aFeature.get() && aFeature->getKind() == SketchPlugin_Sketch::ID()) {
+ aPrs = new PartSet_ResultSketchPrs(theResult);
+ }
+ return aPrs;
+}
+
+bool PartSet_SketcherMgr::isSketchOperation(ModuleBase_Operation* theOperation)
+{
+ return theOperation && theOperation->id().toStdString() == SketchPlugin_Sketch::ID();
+}
+
+bool PartSet_SketcherMgr::isNestedSketchOperation(ModuleBase_Operation* theOperation) const
+{
+ bool aNestedSketch = false;
+
+ FeaturePtr anActiveSketch = activeSketch();
+ if (anActiveSketch.get() && theOperation) {
+ ModuleBase_Operation* aSketchOperation = operationMgr()->findOperation(
+ anActiveSketch->getKind().c_str());
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aSketchOperation && aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get()) {
+ QStringList aGrantedOpIds = aSketchOperation->grantedOperationIds();
+ aNestedSketch = aGrantedOpIds.contains(aFeature->getKind().c_str());
+ }
+ }
+ }
+ return aNestedSketch;
+}
+
+bool PartSet_SketcherMgr::isNestedSketchFeature(const QString& theFeatureKind) const
+{
+ bool aNestedSketch = false;
+
+ FeaturePtr anActiveSketch = activeSketch();
+ if (anActiveSketch.get()) {
+ ModuleBase_Operation* aSketchOperation = operationMgr()->findOperation(
+ anActiveSketch->getKind().c_str());
+ if (aSketchOperation) {
+ QStringList aGrantedOpIds = aSketchOperation->grantedOperationIds();
+ aNestedSketch = aGrantedOpIds.contains(theFeatureKind);
+ }
+ }
+ return aNestedSketch;
+}
+
+bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation,
+ const CompositeFeaturePtr& theSketch) const
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ return aFOperation && !aFOperation->isEditOperation() &&
+ isNestedSketchOperation(aFOperation);
+}
+
+bool PartSet_SketcherMgr::isNestedEditOperation(ModuleBase_Operation* theOperation,
+ const CompositeFeaturePtr& theSketch) const
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ return aFOperation && aFOperation->isEditOperation() &&
+ isNestedSketchOperation(aFOperation);
+}
+
+bool PartSet_SketcherMgr::isEntity(const std::string& theId)
+{
+ return (theId == SketchPlugin_Line::ID()) ||
+ (theId == SketchPlugin_Point::ID()) ||
+ (theId == SketchPlugin_Arc::ID()) ||
+ (theId == SketchPlugin_Circle::ID());
+}
+
+bool PartSet_SketcherMgr::isExternalFeature(const FeaturePtr& theFeature)
+{
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(theFeature);
+ return aSPFeature.get() && aSPFeature->isExternal();
+}
+
+bool PartSet_SketcherMgr::isDistanceOperation(ModuleBase_Operation* theOperation)
+{
+ std::string anId = theOperation ? theOperation->id().toStdString() : "";
+
+ return isDistanceKind(anId);
+}
+
+bool PartSet_SketcherMgr::isDistanceKind(std::string& theKind)
+{
+ return (theKind == SketchPlugin_ConstraintLength::ID()) ||
+ (theKind == SketchPlugin_ConstraintDistance::ID()) ||
+ (theKind == SketchPlugin_ConstraintRadius::ID()) ||
+ (theKind == SketchPlugin_ConstraintAngle::ID()) ||
+ (theKind == SketchPlugin_ConstraintDistanceHorizontal::ID()) ||
+ (theKind == SketchPlugin_ConstraintDistanceVertical::ID()) ||
+ (theKind == SketchPlugin_ConstraintDistanceAlongDir::ID());
+}
+
+void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (!aFOperation)
+ return;
+
+ myModule->onViewTransformed();
+
+ // Display all sketcher sub-Objects
+ myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFOperation->feature());
+ double aSizeOfView = 0;
+ std::shared_ptr<GeomAPI_Pnt> aCentralPoint;
+ if (aFOperation->isEditOperation() &&
+ mySketchPlane->getDefaultSizeOfView(myCurrentSketch, aSizeOfView, aCentralPoint)) {
+ mySketchPlane->setSizeOfView(aSizeOfView, true, aCentralPoint);
+ }
+
+ mySketchPlane->createSketchPlane(myCurrentSketch, myModule->workshop());
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
+
+ // Hide sketcher result
+ std::list<ResultPtr> aResults = myCurrentSketch->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ (*aIt)->setDisplayed(false);
+ }
+ myCurrentSketch->setDisplayed(false);
+
+ // Remove invalid sketch entities
+ std::set<FeaturePtr> anInvalidFeatures;
+ ModelAPI_ValidatorsFactory* aFactory = ModelAPI_Session::get()->validators();
+ int aNumberOfSubs = myCurrentSketch->numberOfSubs();
+ for (int i = 0; i < aNumberOfSubs; i++) {
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ if (aFeature.get()) {
+ if (!aFactory->validate(aFeature))
+ anInvalidFeatures.insert(aFeature);
+ }
+ }
+ if (!anInvalidFeatures.empty()) {
+ std::map<FeaturePtr, std::set<FeaturePtr> > aReferences;
+ ModelAPI_Tools::findAllReferences(anInvalidFeatures, aReferences, false);
+
+ std::set<FeaturePtr>::const_iterator anIt = anInvalidFeatures.begin(),
+ aLast = anInvalidFeatures.end();
+ // separate features to references to parameter features and references to others
+ QStringList anInvalidFeatureNames;
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aFeature = *anIt;
+ if (aFeature.get())
+ anInvalidFeatureNames.append(aFeature->name().c_str());
+ }
+ std::string aPrefixInfo = QString("Invalid features of the sketch will be deleted: %1.\n\n").
+ arg(anInvalidFeatureNames.join(", ")).toStdString().c_str();
+ std::set<FeaturePtr> aFeatureRefsToDelete;
+ if (ModuleBase_Tools::askToDelete(anInvalidFeatures, aReferences, aConnector->desktop(),
+ aFeatureRefsToDelete, aPrefixInfo)) {
+ if (!aFeatureRefsToDelete.empty())
+ anInvalidFeatures.insert(aFeatureRefsToDelete.begin(), aFeatureRefsToDelete.end());
+ ModelAPI_Tools::removeFeatures(anInvalidFeatures, true);
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
+ // TODO: call the next method in the XGUI_OperationMgr::onOperationStarted().
+ workshop()->errorMgr()->updateAcceptAllAction(myCurrentSketch);
+ }
+ }
+
+ // update state of overconstraint listener should be done before sketch features/results
+ // display (as the display will ask custom color from the listener)
+ myModule->overconstraintListener()->setActive(true);
+ // Display sketcher objects
+ QStringList anInfo;
+ Events_ID EVENT_DISP = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
+ const ModelAPI_EventCreator* aECreator = ModelAPI_EventCreator::get();
+ aNumberOfSubs = myCurrentSketch->numberOfSubs();
+ for (int i = 0; i < aNumberOfSubs; i++) {
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+#ifdef DEBUG_SKETCHER_ENTITIES
+ anInfo.append(ModuleBase_Tools::objectInfo(aFeature));
+#endif
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ if ((*aIt)->isDisplayed())
+ // Display object if it was created outside of GUI
+ aECreator->sendUpdated((*aIt), EVENT_DISP);
+ else
+ (*aIt)->setDisplayed(true);
+ }
+ if (aFeature->isDisplayed())
+ aECreator->sendUpdated(aFeature, EVENT_DISP);
+ else
+ aFeature->setDisplayed(true);
+ }
+#ifdef DEBUG_SKETCHER_ENTITIES
+ QString anInfoStr = anInfo.join(";\t");
+ qDebug(QString("startSketch: %1, %2").arg(anInfo.size()).arg(anInfoStr).toStdString().c_str());
+#endif
+
+ bool aHasPlane = false;
+ std::shared_ptr<GeomAPI_Pln> aPln;
+ aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
+ Handle(SelectMgr_Filter) aFilter = myModule->selectionFilter(SF_SketchPlaneFilter);
+ if (!aFilter.IsNull())
+ Handle(ModuleBase_ShapeInPlaneFilter)::DownCast(aFilter)->setPlane(aPln);
+
+ workshop()->selectionActivate()->updateSelectionFilters();
+ workshop()->selectionActivate()->updateSelectionModes();
+
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+
+ myExternalPointsMgr = new PartSet_ExternalPointsMgr(myModule->workshop(), myCurrentSketch);
+
+ workshop()->viewer()->set2dMode(true);
+}
+
+void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)
+{
+ myIsMouseOverWindow = false;
+ myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
+ myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
+ myIsConstraintsShown[PartSet_Tools::Expressions] = false;
+
+ if (myExternalPointsMgr) {
+ delete myExternalPointsMgr;
+ myExternalPointsMgr = 0;
+ }
+ onShowPoints(false);
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
+
+ DataPtr aData = myCurrentSketch->data();
+ if (!aData->isValid()) {
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ // The sketch was aborted
+ myCurrentSketch = CompositeFeaturePtr();
+ mySketchPlane->eraseSketchPlane(myModule->workshop());
+
+ // Erase all sketcher objects
+ QObjectPtrList aObjects = aDisplayer->displayedObjects();
+ foreach (ObjectPtr aObj, aObjects) {
+ DataPtr aObjData = aObj->data();
+ if (!aObjData->isValid())
+ aObj->setDisplayed(false);
+ }
+ }
+ else {
+ // Hide all sketcher sub-Objects
+ int aNumberOfSubs = myCurrentSketch->numberOfSubs();
+ for (int i = 0; i < aNumberOfSubs; i++) {
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ (*aIt)->setDisplayed(false);
+ }
+ aFeature->setDisplayed(false);
+ }
+ // Display sketcher result
+ std::list<ResultPtr> aResults = myCurrentSketch->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ Events_Loop* aLoop = Events_Loop::loop();
+ static Events_ID aDispEvent = aLoop->eventByName(EVENT_OBJECT_TO_REDISPLAY);
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ if (!aFOperation->isDisplayedOnStart(*aIt)) {
+ (*aIt)->setDisplayed(true);
+ // this display event is needed because sketch already may have "displayed" state,
+ // but not displayed while it is still active (issue 613, abort of existing sketch)
+ ModelAPI_EventCreator::get()->sendUpdated(*aIt, aDispEvent);
+ }
+ }
+ if (!aFOperation->isDisplayedOnStart(myCurrentSketch))
+ myCurrentSketch->setDisplayed(true);
+
+ myCurrentSketch = CompositeFeaturePtr();
+ mySketchPlane->eraseSketchPlane(myModule->workshop());
+
+ Events_Loop::loop()->flush(aDispEvent);
+ }
+ workshop()->selectionActivate()->updateSelectionFilters();
+ workshop()->selectionActivate()->updateSelectionModes();
+ workshop()->viewer()->set2dMode(false);
+}
+
+void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
+{
+ if (canChangeCursor(theOperation) && myIsMouseOverWindow) {
+ QCursor* aCurrentCursor = QApplication::overrideCursor();
+ if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
+ QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
+#ifdef DEBUG_CURSOR
+ qDebug("startNestedSketch() : Qt::CrossCursor");
+#endif
+ }
+ }
+}
+
+void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOperation)
+{
+ myIsMouseOverViewProcessed = true;
+ operationMgr()->onValidateOperation();
+ // when sketch nested operation is stopped the cursor should be restored unconditionally
+ //if (canChangeCursor(theOperation)) {
+ QApplication::restoreOverrideCursor();
+#ifdef DEBUG_CURSOR
+ qDebug("stopNestedSketch() : None");
+#endif
+ //}
+ /// improvement to deselect automatically all eventual selected objects, when
+ // returning to the neutral point of the Sketcher
+ bool isClearSelectionPossible = true;
+ if (myIsEditLaunching) {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
+ isClearSelectionPossible = false;
+ }
+ }
+ }
+ if (isClearSelectionPossible)
+ workshop()->selector()->clearSelection();
+ if (myPointsHighlight.size())
+ onShowPoints(true);
+}
+
+void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)
+{
+ if (isNestedCreateOperation(theOperation, activeSketch())) {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ // it is necessary to check the the feature data validity because
+ // some kind of features are removed by an operation commit(the macro state of a feature)
+ if (aFeature.get() && aFeature->data()->isValid()) {
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), true);
+ }
+ }
+ }
+}
+
+bool PartSet_SketcherMgr::sketchSelectionFilter(const XGUI_SelectionFilterType theFilterType)
+{
+ return mySelectionFilterTypes.find(theFilterType) != mySelectionFilterTypes.end();
+}
+
+void PartSet_SketcherMgr::registerSelectionFilter(const XGUI_SelectionFilterType theFilterType,
+ const Handle(SelectMgr_Filter)& theFilter)
+{
+ mySelectionFilterTypes.insert(theFilterType);
+ myModule->registerSelectionFilter(theFilterType, theFilter);
+}
+
+bool PartSet_SketcherMgr::operationActivatedByPreselection()
+{
+ bool isOperationStopped = false;
+ ModuleBase_Operation* anOperation = getCurrentOperation();
+ if(anOperation && isNestedSketchOperation(anOperation)) {
+ // Set final definitions if they are necessary
+ //propertyPanelDefined(aOperation);
+ /// Commit sketcher operations automatically
+ /// distance operation are able to show popup editor to modify the distance value
+ /// after entering the value, the operation should be committed/aborted(by Esc key)
+ bool aCanCommitOperation = true;
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (anOperation);
+ if (aFOperation && PartSet_SketcherMgr::isDistanceOperation(aFOperation)) {
+ bool aValueAccepted = setDistanceValueByPreselection(anOperation, myModule->workshop(),
+ aCanCommitOperation);
+ if (!aValueAccepted)
+ return isOperationStopped;
+ }
+
+ if (aCanCommitOperation)
+ isOperationStopped = anOperation->commit();
+ else {
+ anOperation->abort();
+ isOperationStopped = true;
+ }
+ }
+ return isOperationStopped;
+}
+
+bool PartSet_SketcherMgr::canUndo() const
+{
+ return isNestedCreateOperation(getCurrentOperation(), activeSketch());
+}
+
+bool PartSet_SketcherMgr::canRedo() const
+{
+ return isNestedCreateOperation(getCurrentOperation(), activeSketch());
+}
+
+bool PartSet_SketcherMgr::canEraseObject(const ObjectPtr& theObject) const
+{
+ bool aCanErase = true;
+ // when the sketch operation is active, results of sketch sub-feature can not be hidden
+ if (myCurrentSketch.get()) {
+ return !isObjectOfSketch(theObject);
+ }
+ return aCanErase;
+}
+
+bool PartSet_SketcherMgr::canDisplayObject(const ObjectPtr& theObject) const
+{
+ bool aCanDisplay = true;
+
+ bool aHasActiveSketch = activeSketch().get() != NULL;
+ if (aHasActiveSketch) {
+ // 1. the sketch feature should not be displayed during the sketch active operation
+ // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch
+ // nested features can be visualized
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get() != NULL && aFeature == activeSketch()) {
+ aCanDisplay = false;
+ }
+ std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ /// some sketch entities should be never shown, e.g. projection feature
+ if (aSketchFeature.get())
+ aCanDisplay = aSketchFeature->canBeDisplayed();
+ }
+ else { // there are no an active sketch
+ // 2. sketch sub-features should not be visualized if the sketch operation is not active
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get() != NULL) {
+ std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSketchFeature.get()) {
+ aCanDisplay = false;
+ }
+ }
+ }
+
+ // 3. the method should not filter the objects, which are not related to the current operation.
+ // The object is filtered just if it is a current operation feature or this feature result
+ if (aCanDisplay) {
+ bool isObjectFound = false;
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get()) {
+ std::list<ResultPtr> aResults = aFeature->results();
+ if (theObject == aFeature)
+ isObjectFound = true;
+ else {
+ std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLast = aResults.end();
+ for (; anIt != aLast && !isObjectFound; anIt++) {
+ isObjectFound = *anIt == theObject;
+ }
+ }
+ }
+ }
+ if (isObjectFound) {
+ // 4. For created nested feature operation do not display the created feature if
+ // the mouse curstor leaves the OCC window.
+ // The correction cases, which ignores this condition:
+ // a. the property panel values modification
+ // b. the popup menu activated
+ // c. widget editor control
+ #ifndef DEBUG_DO_NOT_BY_ENTER
+ if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ ModuleBase_WidgetEditor* anEditorWdg =
+ anActiveWidget ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWidget) : 0;
+ // the active widget editor should not influence here. The presentation should be visible
+ // always when this widget is active.
+ if (!anEditorWdg && !myIsPopupMenuActive) {
+ // during a nested create operation, the feature is redisplayed only
+ // if the mouse over view
+ // of there was a value modified in the property panel after the mouse left the view
+ aCanDisplay = canDisplayCurrentCreatedFeature();
+ }
+ }
+ #endif
+ }
+ }
+
+ // checks the sketcher constraints visibility according to active sketch check box states
+ if (aCanDisplay) {
+ bool aProcessed = false;
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get()) {
+ bool aConstraintDisplayed = canDisplayConstraint(aFeature, PartSet_Tools::Any, aProcessed);
+ if (aProcessed)
+ aCanDisplay = aConstraintDisplayed;
+ }
+ }
+
+ return aCanDisplay;
+}
+
+bool PartSet_SketcherMgr::canDisplayConstraint(const FeaturePtr& theFeature,
+ const PartSet_Tools::ConstraintVisibleState& theState,
+ bool& isProcessed) const
+{
+ bool aSwitchedOn = true;
+
+ const QStringList& aConstrIds = constraintsIdList();
+
+ std::string aKind = theFeature->getKind();
+ if (aConstrIds.contains(QString(aKind.c_str()))) {
+ bool isTypedConstraint = false;
+
+ switch (theState) {
+ case PartSet_Tools::Dimensional: {
+ bool isDistance = isDistanceKind(aKind);
+ if (isDistance) {
+ isProcessed = true;
+ aSwitchedOn = myIsConstraintsShown[theState];
+ }
+ }
+ break;
+ case PartSet_Tools::Geometrical: {
+ bool isGeometrical = !isDistanceKind(aKind);
+ if (isGeometrical) {
+ isProcessed = true;
+ aSwitchedOn = myIsConstraintsShown[theState];
+ }
+ }
+ break;
+ case PartSet_Tools::Any: {
+ isProcessed = true;
+ bool isDistance = isDistanceKind(aKind);
+ if (isDistance)
+ aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Dimensional];
+ else
+ aSwitchedOn = myIsConstraintsShown[PartSet_Tools::Geometrical];
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ return aSwitchedOn;
+}
+
+/*void PartSet_SketcherMgr::processHiddenObject(const std::list<ObjectPtr>& theObjects)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation && myCurrentSketch.get()) {
+ // find results of the current operation
+ // these results should not be proposed to be deleted
+ FeaturePtr anOperationFeature = aFOperation->feature();
+ std::list<ResultPtr> anOperationResultList = anOperationFeature->results();
+ std::set<ResultPtr> anOperationResults;
+ std::list<ResultPtr>::const_iterator aRIt = anOperationResultList.begin(),
+ aRLast = anOperationResultList.end();
+ for (; aRIt != aRLast; aRIt++)
+ anOperationResults.insert(*aRIt);
+
+ std::set<FeaturePtr> anObjectsToBeDeleted;
+ QStringList anObjectsToBeDeletedNames;
+ std::list<ObjectPtr>::const_iterator anIt = theObjects.begin(), aLast = theObjects.end();
+ for (; anIt != aLast; anIt++) {
+ ObjectPtr anObject = *anIt;
+ bool aCanErase = true;
+ // when the sketch operation is active, results of sketch sub-feature can not be hidden
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
+ // the result is found between current feature results
+ if (anOperationResults.find(aResult) != anOperationResults.end())
+ continue;
+
+ if (aResult.get()) {
+ // Display sketcher objects
+ for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator anIt;
+ for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {
+ aCanErase = *anIt != aResult;
+ }
+ }
+ }
+ if (!aCanErase) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
+ if (aFeature.get() && anObjectsToBeDeleted.find(aFeature) == anObjectsToBeDeleted.end()) {
+ anObjectsToBeDeleted.insert(aFeature);
+ anObjectsToBeDeletedNames.append(aFeature->name().c_str());
+ }
+ }
+ }
+ if (!anObjectsToBeDeleted.empty()) {
+ QString aFeatureNames = anObjectsToBeDeletedNames.join(", ");
+ QString aMessage = tr("The following features have incorrect presentation and \
+will be hidden: %1. Would you like to delete them?")
+ .arg(aFeatureNames);
+ int anAnswer = QMessageBox::question(qApp->activeWindow(), tr("Features hide"),
+ aMessage, QMessageBox::Ok | QMessageBox::Cancel,
+ QMessageBox::Cancel);
+ if (anAnswer == QMessageBox::Ok) {
+ QObjectPtrList anObjects;
+ std::set<FeaturePtr>::const_iterator anIt = anObjectsToBeDeleted.begin(),
+ aLast = anObjectsToBeDeleted.end();
+ for (; anIt != aLast; anIt++)
+ anObjects.append(*anIt);
+ SessionPtr aMgr = ModelAPI_Session::get();
+ DocumentPtr aDoc = aMgr->activeDocument();
+ bool aIsOp = aMgr->isOperation();
+ if (!aIsOp)
+ aMgr->startOperation();
+ workshop()->deleteFeatures(anObjects);
+ //static Events_ID aDeletedEvent = Events_Loop::eventByName(EVENT_OBJECT_DELETED);
+ //static Events_ID aRedispEvent = Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY);
+ //Events_Loop::loop()->flush(aDeletedEvent);
+ //Events_Loop::loop()->flush(aRedispEvent);
+
+ if (!aIsOp)
+ aMgr->finishOperation();
+ }
+ }
+ }
+}*/
+
+bool PartSet_SketcherMgr::canDisplayCurrentCreatedFeature() const
+{
+ bool aCanDisplay = myIsMouseOverWindow;
+ if (!aCanDisplay) {
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ if (anActiveWidget)
+ aCanDisplay = anActiveWidget->getValueState() == ModuleBase_ModelWidget::Stored;
+ }
+ return aCanDisplay;
+}
+
+bool PartSet_SketcherMgr::canChangeCursor(ModuleBase_Operation* theOperation) const
+{
+ return isNestedCreateOperation(theOperation, activeSketch()) ||
+ myModule->sketchReentranceMgr()->isInternalEditActive();
+}
+
+const QMap<PartSet_Tools::ConstraintVisibleState, bool>& PartSet_SketcherMgr::showConstraintStates()
+{
+ return myIsConstraintsShown;
+}
+
+bool PartSet_SketcherMgr::isObjectOfSketch(const ObjectPtr& theObject) const
+{
+ bool isFoundObject = false;
+
+ FeaturePtr anObjectFeature = ModelAPI_Feature::feature(theObject);
+ if (anObjectFeature.get()) {
+ int aSize = myCurrentSketch->numberOfSubs();
+ for (int i = 0; i < aSize && !isFoundObject; i++) {
+ FeaturePtr aCurrentFeature = myCurrentSketch->subFeature(i);
+ isFoundObject = myCurrentSketch->subFeature(i) == anObjectFeature;
+ }
+ }
+ return isFoundObject;
+}
+
+void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePlane)
+{
+ Handle(SelectMgr_Filter) aFilter = myModule->selectionFilter(SF_SketchPlaneFilter);
+ if (!aFilter.IsNull())
+ Handle(ModuleBase_ShapeInPlaneFilter)::DownCast(aFilter)->setPlane(thePlane);
+
+ workshop()->selectionActivate()->updateSelectionModes();
+}
+
+bool PartSet_SketcherMgr::setDistanceValueByPreselection(ModuleBase_Operation* theOperation,
+ ModuleBase_IWorkshop* theWorkshop,
+ bool& theCanCommitOperation)
+{
+ bool isValueAccepted = false;
+ theCanCommitOperation = false;
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ FeaturePtr aFeature = aFOperation->feature();
+ // editor is shown only if all attribute references are filled by preseletion
+ bool anAllRefAttrInitialized = true;
+
+ std::list<AttributePtr> aRefAttrs = aFeature->data()->attributes(
+ ModelAPI_AttributeRefAttr::typeId());
+ std::list<AttributePtr>::const_iterator anIt = aRefAttrs.begin(), aLast = aRefAttrs.end();
+ for (; anIt != aLast && anAllRefAttrInitialized; anIt++) {
+ anAllRefAttrInitialized = (*anIt)->isInitialized();
+ }
+ if (anAllRefAttrInitialized) {
+ // Activate dimension value editing on double click
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ // Find corresponded widget to activate value editing
+ foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
+ if (aWgt->attributeID() == "ConstraintValue") {
+ // the featue should be displayed in order to find the AIS text position,
+ // the place where the editor will be shown
+ aFeature->setDisplayed(true);
+ /// the execute is necessary to perform in the feature compute for flyout position
+ aFeature->execute();
+
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_CREATED));
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+
+ PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
+ if (anEditor) {
+ int aX = 0, anY = 0;
+
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(theWorkshop);
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ AISObjectPtr anAIS = aDisplayer->getAISObject(aFeature);
+ Handle(AIS_InteractiveObject) anAISIO;
+ if (anAIS.get() != NULL) {
+ anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
+ }
+ if (anAIS.get() != NULL) {
+ Handle(AIS_InteractiveObject) anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
+
+ if (!anAISIO.IsNull()) {
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAISIO);
+ if (!aDim.IsNull()) {
+ gp_Pnt aPosition = aDim->GetTextPosition();
+
+ ModuleBase_IViewer* aViewer = aWorkshop->viewer();
+ Handle(V3d_View) aView = aViewer->activeView();
+ int aCX, aCY;
+ aView->Convert(aPosition.X(), aPosition.Y(), aPosition.Z(), aCX, aCY);
+
+ QWidget* aViewPort = aViewer->activeViewPort();
+ QPoint aGlPoint = aViewPort->mapToGlobal(QPoint(aCX, aCY));
+ aX = aGlPoint.x();
+ anY = aGlPoint.y();
+ }
+ }
+ anEditor->setCursorPosition(aX, anY);
+ isValueAccepted = anEditor->showPopupEditor(false);
+ theCanCommitOperation = true;
+ }
+ }
+ }
+ }
+ }
+ return isValueAccepted;
+}
+
+void PartSet_SketcherMgr::getSelectionOwners(const FeaturePtr& theFeature,
+ const FeaturePtr& theSketch,
+ ModuleBase_IWorkshop* theWorkshop,
+ const FeatureToSelectionMap& theSelection,
+ SelectMgr_IndexedMapOfOwner& theOwnersToSelect)
+{
+ if (theFeature.get() == NULL)
+ return;
+
+ FeatureToSelectionMap::const_iterator anIt = theSelection.find(theFeature);
+ SelectionInfo anInfo = anIt.value();
+ std::set<AttributePtr> aSelectedAttributes = anInfo.myAttributes;
+ std::set<ResultPtr> aSelectedResults = anInfo.myResults;
+
+ ModuleBase_IViewer* aViewer = theWorkshop->viewer();
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+
+ // 1. found the feature's owners. Check the AIS objects of the constructions
+ AISObjectPtr aAISObj = aDisplayer->getAISObject(theFeature);
+ if (aAISObj.get() != NULL && aSelectedAttributes.empty() && aSelectedResults.empty()) {
+ Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
+
+ SelectMgr_IndexedMapOfOwner aSelectedOwners;
+ aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
+ for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {
+ Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);
+ if (!anOwner.IsNull())
+ theOwnersToSelect.Add(anOwner);
+ }
+ }
+
+ // 2. found the feature results's owners
+ std::list<ResultPtr> aResults = theFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+
+ bool isSameShape = false;
+ if (aResults.size() > 0) {
+ ResultPtr aFirstResult = theFeature->firstResult();
+ if (aFirstResult.get() && aFirstResult->shape().get()) {
+ TopoDS_Shape aFirstShape = aFirstResult->shape()->impl<TopoDS_Shape>();
+ isSameShape = aFirstShape.IsEqual(anInfo.myFirstResultShape);
+ }
+ }
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ ResultPtr aResult = *aIt;
+ AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
+ if (aAISObj.get() == NULL)
+ continue;
+ Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
+
+ SelectMgr_IndexedMapOfOwner aSelectedOwners;
+ aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
+ bool aFoundLocalShape = false;
+ for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {
+ Handle(StdSelect_BRepOwner) anOwner =
+ Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
+ if ( anOwner.IsNull() || !anOwner->HasShape() || theOwnersToSelect.FindIndex(anOwner))
+ continue;
+ const TopoDS_Shape& aShape = anOwner->Shape();
+ TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
+ if (aShapeType == TopAbs_VERTEX) {
+ AttributePtr aPntAttr =
+ PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);
+ if (aPntAttr.get() != NULL &&
+ aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end())
+ theOwnersToSelect.Add(anOwner);
+ else if (isSameShape && anInfo.myLocalSelectedShapes.Contains(aShape)) {
+ theOwnersToSelect.Add(anOwner);
+ }
+ }
+ else if (aShapeType == TopAbs_EDGE) {
+ if (isSameShape && anInfo.myLocalSelectedShapes.Contains(aShape)) {
+ // try to restore local selection on Shape result
+ // we can do this only if the shape was not changed
+ theOwnersToSelect.Add(anOwner);
+ aFoundLocalShape = true;
+ break;
+ }
+ }
+ }
+ if (!aFoundLocalShape) {
+ // result owners are put in the list of selection only if local selected shapes were not
+ // found
+ if (aSelectedResults.find(aResult) != aSelectedResults.end()) {
+ for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {
+ Handle(StdSelect_BRepOwner) anOwner =
+ Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
+ if ( anOwner.IsNull() || !anOwner->HasShape() || theOwnersToSelect.FindIndex(anOwner))
+ continue;
+ // select whole result
+ theOwnersToSelect.Add(anOwner);
+ }
+ }
+ }
+ }
+}
+
+void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
+ const bool isToConnect)
+{
+ //Temporary commented as we do not modify values in property panel
+ if (isToConnect) {
+ //connect(theWidget, SIGNAL(beforeValuesChanged()),
+ // this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ //connect(theWidget, SIGNAL(afterValuesChanged()),
+ // this, SLOT(onAfterValuesChangedInPropertyPanel()));
+ connect(theWidget, SIGNAL(afterValuesChanged()),
+ myModule->sketchReentranceMgr(), SLOT(onAfterValuesChangedInPropertyPanel()));
+ }
+ else {
+ //disconnect(theWidget, SIGNAL(beforeValuesChanged()),
+ // this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ //disconnect(theWidget, SIGNAL(afterValuesChanged()),
+ // this, SLOT(onAfterValuesChangedInPropertyPanel()));
+ disconnect(theWidget, SIGNAL(afterValuesChanged()),
+ myModule->sketchReentranceMgr(), SLOT(onAfterValuesChangedInPropertyPanel()));
+ }
+}
+
+void PartSet_SketcherMgr::widgetStateChanged(int thePreviousState)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ if (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
+ isNestedSketchOperation(aFOperation) &&
+ thePreviousState == ModuleBase_ModelWidget::ModifiedInPP) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
+ }
+}
+
+void PartSet_SketcherMgr::customizePresentation(const ObjectPtr& theObject)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation && (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
+ isNestedSketchOperation(aFOperation)))
+ SketcherPrs_Tools::sendExpressionShownEvent(myIsConstraintsShown[PartSet_Tools::Expressions]);
+
+ // update entities selection priorities
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get() && PartSet_SketcherMgr::isEntity(aFeature->getKind())) {
+ // update priority for feature
+ updateSelectionPriority(aFeature, aFeature);
+ // update priority for results of the feature
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLastIt = aResults.end();
+ for (; anIt != aLastIt; anIt++)
+ updateSelectionPriority(*anIt, aFeature);
+ }
+}
+
+ModuleBase_Operation* PartSet_SketcherMgr::getCurrentOperation() const
+{
+ return myModule->workshop()->currentOperation();
+}
+
+//**************************************************************
+ModuleBase_ModelWidget* PartSet_SketcherMgr::getActiveWidget() const
+{
+ ModuleBase_ModelWidget* aWidget = 0;
+ ModuleBase_Operation* anOperation = getCurrentOperation();
+ if (anOperation) {
+ ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
+ if (aPanel)
+ aWidget = aPanel->activeWidget();
+ }
+ return aWidget;
+}
+
+void PartSet_SketcherMgr::visualizeFeature(const FeaturePtr& theFeature,
+ const bool isEditOperation,
+ const bool isToDisplay,
+ const bool isFlushRedisplay)
+{
+ #ifdef DEBUG_DO_NOT_BY_ENTER
+ return;
+ #endif
+
+ if (isEditOperation || !theFeature.get())
+ return;
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+
+ // 1. change visibility of the object itself, here the presentable object is processed,
+ // e.g. constraints features
+ //FeaturePtr aFeature = aFOperation->feature();
+ std::list<ResultPtr> aResults = theFeature->results();
+ if (isToDisplay)
+ theFeature->setDisplayed(true);
+ else
+ theFeature->setDisplayed(false);
+
+ // change visibility of the object results, e.g. non-constraint features
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ if (isToDisplay) {
+ (*aIt)->setDisplayed(true);
+ }
+ else {
+ (*aIt)->setDisplayed(false);
+ }
+ }
+ if (isFlushRedisplay)
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+}
+
+void PartSet_SketcherMgr::storeSelection(const SelectionType theType,
+ PartSet_SketcherMgr::FeatureToSelectionMap& theCurrentSelection)
+{
+ if (!myCurrentSketch.get())
+ return;
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ ModuleBase_ISelection* aSelect = aWorkshop->selection();
+ QList<ModuleBase_ViewerPrsPtr> aStoredPrs;
+
+ if (theType == ST_HighlightType || theType == ST_SelectAndHighlightType)
+ aStoredPrs = aSelect->getHighlighted();
+
+ QList<FeaturePtr> aFeatureList;
+ if (theType == ST_SelectAndHighlightType || theType == ST_SelectType) {
+ QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected(
+ ModuleBase_ISelection::AllControls);
+ aStoredPrs.append(aSelected);
+ }
+
+ // 1. it is necessary to save current selection in order to restore it after the features moving
+ theCurrentSelection.clear();
+
+ QList<ModuleBase_ViewerPrsPtr>::const_iterator anIt = aStoredPrs.begin(),
+ aLast = aStoredPrs.end();
+
+ CompositeFeaturePtr aSketch = activeSketch();
+ for (; anIt != aLast; anIt++) {
+ ModuleBase_ViewerPrsPtr aPrs = *anIt;
+ ObjectPtr anObject = aPrs->object();
+ if (!anObject.get())
+ continue;
+
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
+ FeaturePtr aFeature;
+ if (aResult.get())
+ aFeature = ModelAPI_Feature::feature(aResult);
+ else
+ aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(anObject);
+
+ if (!aFeature.get())
+ continue;
+
+ std::set<AttributePtr> aSelectedAttributes;
+ std::set<ResultPtr> aSelectedResults;
+ SelectionInfo anInfo;
+ if (theCurrentSelection.find(aFeature) != theCurrentSelection.end())
+ anInfo = theCurrentSelection.find(aFeature).value();
+
+ TopoDS_Shape aFirstShape;
+ ResultPtr aFirstResult = aFeature->firstResult();
+ if (aFirstResult.get() && aFirstResult->shape().get())
+ aFirstShape = aFirstResult->shape()->impl<TopoDS_Shape>();
+ anInfo.myFirstResultShape = aFirstShape;
+ Handle(SelectMgr_EntityOwner) anOwner = aPrs->owner();
+ if (aResult.get()) {
+ getAttributesOrResults(anOwner, aFeature, aSketch, aResult,
+ anInfo.myAttributes, anInfo.myResults, anInfo.myLocalSelectedShapes);
+ }
+ else {
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ ResultPtr aResult = *aIt;
+ getAttributesOrResults(anOwner, aFeature, aSketch, aResult,
+ anInfo.myAttributes, anInfo.myResults, anInfo.myLocalSelectedShapes);
+ }
+ }
+ theCurrentSelection[aFeature] = anInfo;
+ }
+ //qDebug(QString(" storeSelection: %1").arg(theCurrentSelection.size()).toStdString().c_str());
+}
+
+void PartSet_SketcherMgr::restoreSelection(
+ PartSet_SketcherMgr::FeatureToSelectionMap& theCurrentSelection)
+{
+ if (!myCurrentSketch.get())
+ return;
+
+ //qDebug(QString("restoreSelection: %1").arg(theCurrentSelection.size()).toStdString().c_str());
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ FeatureToSelectionMap::const_iterator aSIt = theCurrentSelection.begin(),
+ aSLast = theCurrentSelection.end();
+ SelectMgr_IndexedMapOfOwner anOwnersToSelect;
+ anOwnersToSelect.Clear();
+ for (; aSIt != aSLast; aSIt++) {
+ getSelectionOwners(aSIt.key(), myCurrentSketch, aWorkshop, theCurrentSelection,
+ anOwnersToSelect);
+ }
+ aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);
+}
+
+void PartSet_SketcherMgr::onShowConstraintsToggle(int theType, bool theState)
+{
+ PartSet_Tools::ConstraintVisibleState aType = (PartSet_Tools::ConstraintVisibleState)theType;
+
+ updateBySketchParameters(aType, theState);
+}
+
+void PartSet_SketcherMgr::updateBySketchParameters(
+ const PartSet_Tools::ConstraintVisibleState& theType,
+ bool theState)
+{
+ if (myCurrentSketch.get() == NULL)
+ return;
+
+ bool aPrevState = myIsConstraintsShown[theType];
+ myIsConstraintsShown[theType] = theState;
+
+ switch (theType) {
+ case PartSet_Tools::Geometrical:
+ case PartSet_Tools::Dimensional: {
+ if (aPrevState != theState) {
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ int aNumberOfSubs = myCurrentSketch->numberOfSubs();
+ for (int i = 0; i < aNumberOfSubs; i++) {
+ FeaturePtr aSubFeature = myCurrentSketch->subFeature(i);
+ bool aProcessed = false;
+ bool aConstraintDisplayed = canDisplayConstraint(aSubFeature, theType, aProcessed);
+ if (aProcessed)
+ aSubFeature->setDisplayed(aConstraintDisplayed);
+ }
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+ }
+ }
+ break;
+ case PartSet_Tools::Expressions: {
+ if (aPrevState != theState) {
+ /// call all sketch features redisplay, the expression state will be corrected in customize
+ /// of distance presentation
+ Events_ID anEventId = Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY);
+ PartSet_Tools::sendSubFeaturesEvent(myCurrentSketch, anEventId);
+ }
+ }
+ break;
+ }
+}
+
+void PartSet_SketcherMgr::updateSelectionPriority(ObjectPtr theObject,
+ FeaturePtr theFeature)
+{
+ if (!theObject.get() || !theFeature.get())
+ return;
+
+ AISObjectPtr anAIS = workshop()->displayer()->getAISObject(theObject);
+ Handle(AIS_InteractiveObject) anAISIO;
+ if (anAIS.get() != NULL) {
+ anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
+ }
+
+ if (!anAISIO.IsNull()) { // the presentation for the object is visualized
+ int anAdditionalPriority = 0;
+ // current feature
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(theFeature);
+ if (aSPFeature.get() != NULL) {
+ // 1. Vertices
+ // 2. Simple segments
+ // 3. External objects (violet color)
+ // 4. Auxiliary segments (dotted)
+ // StdSelect_BRepSelectionTool::Load uses priority calculating:
+ // Standard_Integer aPriority =
+ // (thePriority == -1) ? GetStandardPriority (theShape, theType) : thePriority;
+ // Priority of Vertex is 8, edge(segment) is 7.
+ // It might be not corrected as provides the condition above.
+ bool isExternal = aSPFeature->isExternal();
+ bool isAuxiliary = PartSet_Tools::isAuxiliarySketchEntity(aSPFeature);
+ // current feature
+ if (!isExternal && !isAuxiliary)
+ anAdditionalPriority = 30;
+ // external feature
+ if (isExternal)
+ anAdditionalPriority = 20;
+ // auxiliary feature
+ if (isAuxiliary) {
+ anAdditionalPriority = 10; /// auxiliary objects should have less priority that
+ // edges/vertices of local selection on not-sketch objects
+ }
+ Handle(ModuleBase_ResultPrs) aResult = Handle(ModuleBase_ResultPrs)::DownCast(anAISIO);
+ if (!aResult.IsNull()) {
+ aResult->setAdditionalSelectionPriority(anAdditionalPriority);
+ }
+ }
+ }
+}
+
+XGUI_Workshop* PartSet_SketcherMgr::workshop() const
+{
+ ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
+ return aConnector->workshop();
+}
+
+XGUI_OperationMgr* PartSet_SketcherMgr::operationMgr() const
+{
+ return workshop()->operationMgr();
+}
+
+void PartSet_SketcherMgr::onShowPoints(bool toShow)
+{
+ if (!myCurrentSketch.get())
+ return;
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ ModuleBase_IViewer* aViewer = aWorkshop->viewer();
+ Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+
+ bool aToUpdate = false;
+ if (toShow) {
+ std::list<ResultPtr> aFreePoints = SketcherPrs_Tools::getFreePoints(myCurrentSketch);
+
+ // Delete obsolete presentations
+ std::list<ResultPtr> aDelList;
+ foreach(ResultPtr aObj, myPointsHighlight.keys()) {
+ bool aFound = (std::find(aFreePoints.begin(), aFreePoints.end(), aObj) != aFreePoints.end());
+ if (!aFound)
+ aDelList.push_back(aObj);
+ }
+ foreach(ResultPtr aObj, aDelList) {
+ aContext->Remove(myPointsHighlight[aObj], false);
+ aToUpdate = true;
+ myPointsHighlight.remove(aObj);
+ }
+
+ // Display new objects
+ QList<ResultPtr> aKeysList = myPointsHighlight.keys();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aFreePoints.cbegin(); aIt != aFreePoints.cend(); aIt++) {
+ if (!aKeysList.contains(*aIt)) {
+ GeomShapePtr aShapePtr = (*aIt)->shape();
+ TopoDS_Shape aShape = aShapePtr->impl<TopoDS_Shape>();
+ Handle(AIS_Shape) aShapePrs = new AIS_Shape(aShape);
+ aShapePrs->SetColor(Quantity_NOC_BLUE1);
+ aShapePrs->SetZLayer(Graphic3d_ZLayerId_Top);
+ Handle(Prs3d_Drawer) aDrawer = aShapePrs->Attributes();
+ if (aDrawer->HasOwnPointAspect()) {
+ aDrawer->PointAspect()->SetTypeOfMarker(Aspect_TOM_O_STAR);
+ aDrawer->PointAspect()->SetColor(Quantity_NOC_BLUE1);
+ aDrawer->PointAspect()->SetScale(2);
+ }
+ else
+ aDrawer->SetPointAspect(new Prs3d_PointAspect(Aspect_TOM_O_STAR, Quantity_NOC_BLUE1, 2));
+ aContext->Display(aShapePrs, false);
+ aContext->Deactivate(aShapePrs);
+ myPointsHighlight[*aIt] = aShapePrs;
+ aToUpdate = true;
+ }
+ }
+ }
+ else {
+ foreach(Handle(AIS_Shape) aPrs, myPointsHighlight.values()) {
+ aContext->Remove(aPrs, false);
+ aToUpdate = true;
+ }
+ myPointsHighlight.clear();
+ }
+ if (aToUpdate)
+ aViewer->update();
+}
