//#define DEBUG_CURSOR
/// Fills attribute and result lists by the selected owner. In case if the attribute is found,
-/// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge,
+/// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge,
/// put the function result as is to the list of results.
/// \param theOwner a viewer selected owner
/// \param theFeature a feature, where the attribute is searched
restoreSelection();
myCurrentSelection.clear();
- // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
+ // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
// viewer happens by deselect/select the modified objects. The flag should be restored after
// the selection processing. The update viewer should be also called.
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
restoreSelection();
launchEditing();
if (aFeature.get() != NULL) {
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature.get() &&
+ if (aSPFeature.get() &&
(aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
DataPtr aData = aSPFeature->data();
AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
- std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
+ std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
}
restoreSelection();
launchEditing();
if (aFeature.get() != NULL) {
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature.get() &&
+ if (aSPFeature.get() &&
(aSPFeature->getKind() == SketchPlugin_ConstraintRadius::ID() ||
aSPFeature->getKind() == SketchPlugin_ConstraintAngle::ID())) {
DataPtr aData = aSPFeature->data();
AttributePtr aAttr = aData->attribute(SketchPlugin_Constraint::FLYOUT_VALUE_PNT());
- std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
+ std::shared_ptr<GeomDataAPI_Point2D> aFPAttr =
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aAttr);
aFPAttr->setValue(myCurrentPoint.myCurX, myCurrentPoint.myCurY);
}
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
- // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
+ // 3. the flag to disable the update viewer should be set in order to avoid blinking in the
// viewer happens by deselect/select the modified objects. The flag should be restored after
// the selection processing. The update viewer should be also called.
bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
std::string aAttrId = anAttr->id();
DataPtr aData = aFeature->data();
if (aData->isValid()) {
- std::shared_ptr<GeomDataAPI_Point2D> aPoint =
+ std::shared_ptr<GeomDataAPI_Point2D> aPoint =
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(aAttrId));
if (aPoint.get() != NULL) {
bool isImmutable = aPoint->setImmutable(true);
myIsPopupMenuActive = false;
}
-void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
+void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
Point& thePoint)
{
Handle(V3d_View) aView = theWnd->v3dView();
{
if (!myCurrentSelection.empty()) {
FeaturePtr aFeature = myCurrentSelection.begin().key();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSPFeature && (!aSPFeature->isExternal())) {
myModule->editFeature(aSPFeature);
myModule->workshop()->viewer()->addSelectionFilter(myCirclePointFilter);
- if (myPlaneFilter.IsNull())
+ if (myPlaneFilter.IsNull())
myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);
}
if (!aFOperation->isDisplayedOnStart(myCurrentSketch))
myCurrentSketch->setDisplayed(true);
-
+
myCurrentSketch = CompositeFeaturePtr();
myModule->workshop()->viewer()->removeSelectionFilter(myCirclePointFilter);
bool aHasActiveSketch = activeSketch().get() != NULL;
if (aHasActiveSketch) {
// 1. the sketch feature should not be displayed during the sketch active operation
- // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch
+ // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch
// nested features can be visualized
FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
if (aFeature.get() != NULL && aFeature == activeSketch()) {
#ifndef DEBUG_DO_NOT_BY_ENTER
if (isNestedCreateOperation(getCurrentOperation(), activeSketch())) {
ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
- ModuleBase_WidgetEditor* anEditorWdg =
+ ModuleBase_WidgetEditor* anEditorWdg =
anActiveWidget ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWidget) : 0;
// the active widget editor should not influence here. The presentation should be visible
// always when this widget is active.
if (!anEditorWdg && !myIsPopupMenuActive) {
- // during a nested create operation, the feature is redisplayed only
+ // during a nested create operation, the feature is redisplayed only
// if the mouse over view
// of there was a value modified in the property panel after the mouse left the view
aCanDisplay = canDisplayCurrentCreatedFeature();
void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
{
- if (myPlaneFilter.IsNull())
+ if (myPlaneFilter.IsNull())
myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
myPlaneFilter->setPlane(thePln);
ResultPtr aResult = *aIt;
AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
if (aAISObj.get() == NULL)
- continue;
+ continue;
Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
- SelectMgr_IndexedMapOfOwner aSelectedOwners;
+ SelectMgr_IndexedMapOfOwner aSelectedOwners;
aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
for ( Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++ ) {
- Handle(StdSelect_BRepOwner) anOwner =
+ Handle(StdSelect_BRepOwner) anOwner =
Handle(StdSelect_BRepOwner)::DownCast(aSelectedOwners(i));
if ( anOwner.IsNull() || !anOwner->HasShape() )
continue;
const TopoDS_Shape& aShape = anOwner->Shape();
TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
if (aShapeType == TopAbs_VERTEX) {
- AttributePtr aPntAttr =
+ AttributePtr aPntAttr =
PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);
if (aPntAttr.get() != NULL &&
aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end()) {
}
}
-void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
+void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
const bool isToConnect)
{
if (isToConnect) {
// 1. it is necessary to save current selection in order to restore it after the features moving
myCurrentSelection.clear();
- QList<ModuleBase_ViewerPrsPtr>::const_iterator anIt = aStoredPrs.begin(),
+ QList<ModuleBase_ViewerPrsPtr>::const_iterator anIt = aStoredPrs.begin(),
aLast = aStoredPrs.end();
CompositeFeaturePtr aSketch = activeSketch();
std::set<AttributePtr> aSelectedAttributes;
std::set<ResultPtr> aSelectedResults;
if (myCurrentSelection.find(aFeature) != myCurrentSelection.end()) {
- std::pair<std::set<AttributePtr>, std::set<ResultPtr> > aPair =
+ std::pair<std::set<AttributePtr>, std::set<ResultPtr> > aPair =
myCurrentSelection.find(aFeature).value();
aSelectedAttributes = aPair.first;
aSelectedResults = aPair.second;
// 3. External objects (violet color)
// 4. Auxiliary segments (dotted)
// StdSelect_BRepSelectionTool::Load uses priority calculating:
- // Standard_Integer aPriority =
+ // Standard_Integer aPriority =
// (thePriority == -1) ? GetStandardPriority (theShape, theType) : thePriority;
// Priority of Vertex is 8, edge(segment) is 7.
// It might be not corrected as provides the condition above.
