#include "PartSet_Tools.h"
#include "PartSet_WidgetSketchLabel.h"
-#include <ModuleBase_WidgetEditor.h>
-
#include <XGUI_ModuleConnector.h>
#include <XGUI_Displayer.h>
#include <XGUI_Workshop.h>
#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Selection.h>
#include <XGUI_SelectionMgr.h>
-#include <ModuleBase_ModelWidget.h>
#include <XGUI_ModuleConnector.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ViewerProxy.h>
+#include <XGUI_OperationMgr.h>
-#include <AppElements_MainWindow.h>
-
+#include <ModuleBase_IPropertyPanel.h>
+#include <ModuleBase_ISelection.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IWorkshop.h>
#include <ModuleBase_IViewWindow.h>
+#include <ModuleBase_ModelWidget.h>
#include <ModuleBase_Operation.h>
-#include <ModuleBase_ISelection.h>
-#include <ModuleBase_IPropertyPanel.h>
+#include <ModuleBase_OperationFeature.h>
#include <ModuleBase_Operation.h>
+#include <ModuleBase_WidgetEditor.h>
#include <GeomDataAPI_Point2D.h>
#include <SketchPlugin_ConstraintCoincidence.h>
#include <SketchPlugin_ConstraintFillet.h>
#include <SketchPlugin_ConstraintMirror.h>
+#include <SketchPlugin_ConstraintAngle.h>
#include <SketchPlugin_MultiRotation.h>
#include <SketchPlugin_MultiTranslation.h>
#include <ModelAPI_Events.h>
#include <ModelAPI_Session.h>
+#include <ModelAPI_AttributeString.h>
#include <QMouseEvent>
#include <QApplication>
return aRes;
}*/
-void fillFeature2Attribute(const QList<ModuleBase_ViewerPrs>& theList,
- QMap<FeaturePtr, QList<AttributePtr> >& theFeature2AttributeMap,
- const FeaturePtr theSketch)
+// Fills the list of features the list of selected presentations.
+// \param theList a list of selected presentations
+// \param theSketch a sketch to project a vertex shape of a presentation to the plane
+// and find the corresponded attribute
+// \param theFeatureList an output list of features
+void fillFeatureList(const QList<ModuleBase_ViewerPrs>& theList,
+ const FeaturePtr theSketch,
+ QList<FeaturePtr>& theFeatureList)
{
QList<ModuleBase_ViewerPrs> aRes;
{
ModuleBase_ViewerPrs aPrs = *anIt;
FeaturePtr aFeature = ModelAPI_Feature::feature(aPrs.object());
- if (aFeature.get() == NULL)
- continue;
+ if (aFeature.get() && !theFeatureList.contains(aFeature))
+ theFeatureList.append(aFeature);
+ }
+}
- QList<AttributePtr> anAttributes;
- if (theFeature2AttributeMap.contains(aFeature)) {
- anAttributes = theFeature2AttributeMap[aFeature];
+/// Fills attribute and result lists by the selected owner. In case if the attribute is found,
+/// by the owner shape, it is put to the list. Otherwise if type of owner shape is edge, put the function
+/// result as is to the list of results.
+/// \param theOwner a viewer selected owner
+/// \param theFeature a feature, where the attribute is searched
+/// \param theSketch a current sketch
+/// \param theSelectedAttribute an output list of attributes
+/// \param theSelectedResults an output list of edge results
+void getAttributesOrResults(const Handle(SelectMgr_EntityOwner)& theOwner,
+ const FeaturePtr& theFeature, const FeaturePtr& theSketch,
+ const ResultPtr& theResult,
+ std::set<AttributePtr>& aSelectedAttributes,
+ std::set<ResultPtr>& aSelectedResults)
+{
+ Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(theOwner);
+ if (aBRepOwner.IsNull())
+ return;
+ Handle(AIS_InteractiveObject) anIO = Handle(AIS_InteractiveObject)::DownCast(
+ aBRepOwner->Selectable());
+ if (aBRepOwner->HasShape()) {
+ const TopoDS_Shape& aShape = aBRepOwner->Shape();
+ TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
+ if (aShapeType == TopAbs_VERTEX) {
+ AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature,
+ aShape, theSketch);
+ if (aPntAttr.get() != NULL)
+ aSelectedAttributes.insert(aPntAttr);
}
- AttributePtr anAttr;
- TopoDS_Shape aShape = aPrs.shape();
- if (!aShape.IsNull()) {
- if (aShape.ShapeType() == TopAbs_VERTEX) {
- anAttr = PartSet_Tools::findAttributeBy2dPoint(aFeature, aShape, theSketch);
- if (anAttr.get() != NULL && !anAttributes.contains(anAttr))
- anAttributes.push_back(anAttr);
- }
+ else if (aShapeType == TopAbs_EDGE &&
+ aSelectedResults.find(theResult) == aSelectedResults.end()) {
+ aSelectedResults.insert(theResult);
}
- theFeature2AttributeMap[aFeature] = anAttributes;
}
}
-
-
-
PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)
: QObject(theModule), myModule(theModule), myIsDragging(false), myDragDone(false),
- myIsPropertyPanelValueChanged(false), myIsMouseOverWindow(false),
+ myIsResetCurrentValue(false), myIsMouseOverWindow(false),
myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
myIsPopupMenuActive(false), myIsConstraintsShown(true)
{
ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
- myPreviousSelectionEnabled = true;//aViewer->isSelectionEnabled();
+ myPreviousDrawModeEnabled = true;//aViewer->isSelectionEnabled();
connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
// the mouse move and use the cursor position to update own values. If the presentaion is
// redisplayed before this update, the feature presentation jumps from reset value to current.
myIsMouseOverWindow = true;
- myIsPropertyPanelValueChanged = false;
+ myIsResetCurrentValue = false;
+ // it is important to validate operation here only if sketch entity create operation is active
+ // because at this operation we reacts to the mouse leave/enter view port
+ //operationMgr()->onValidateOperation();
#ifdef DEBUG_MOUSE_OVER_WINDOW_FLAGS
qDebug(QString("onEnterViewPort: %1").arg(mouseOverWindowFlagsInfo()).toStdString().c_str());
#endif
if (!isNestedCreateOperation(getCurrentOperation()))
return;
+
+ QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));//QIcon(":pictures/button_plus.png").pixmap(20,20)));
+ operationMgr()->onValidateOperation();
+
// we need change displayed state of the current operation feature
// if the feature is presentable, e.g. distance construction. It has no results, so workshop does
// not accept a signal about the result created. Nothing is shown until mouse is moved out/in view
// port. If the isDisplayed flag is true, the presentable feature is displayed as soon as the
// presentation becomes valid and redisplay happens
- ModuleBase_Operation* aOperation = getCurrentOperation();
- if (aOperation) {
- FeaturePtr aFeature = aOperation->feature();
+ //ModuleBase_Operation* aOperation = getCurrentOperation();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
if (aFeature.get() && aFeature->data()->isValid()) {
- visualizeFeature(aOperation, canDisplayObject(aFeature), false);
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature), false);
}
}
}
{
myIsMouseOverViewProcessed = false;
myIsMouseOverWindow = false;
- myIsPropertyPanelValueChanged = false;
+ // it is important to validate operation here only if sketch entity create operation is active
+ // because at this operation we reacts to the mouse leave/enter view port
+ //operationMgr()->onValidateOperation();
#ifdef DEBUG_MOUSE_OVER_WINDOW_FLAGS
qDebug(QString("onLeaveViewPort: %1").arg(mouseOverWindowFlagsInfo()).toStdString().c_str());
#endif
if (!isNestedCreateOperation(getCurrentOperation()))
return;
+
+ QApplication::restoreOverrideCursor();
+
// the method should be performed if the popup menu is called,
// the reset of the current widget should not happen
if (myIsPopupMenuActive)
return;
+ operationMgr()->onValidateOperation();
+
// 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
ModuleBase_Operation* aOperation = getCurrentOperation();
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
ModuleBase_ModelWidget* aActiveWgt = aPanel->activeWidget();
- if (aActiveWgt) {
- aActiveWgt->reset();
+ if (aActiveWgt && aActiveWgt->reset()) {
+ myIsResetCurrentValue = true;
}
aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
// hides the presentation of the current operation feature
- //myIsPropertyPanelValueChanged = false;
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
- FeaturePtr aFeature = getCurrentOperation()->feature();
- visualizeFeature(aOperation, canDisplayObject(aFeature));
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
}
void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()
{
+ myIsResetCurrentValue = false;
+
if (isNestedCreateOperation(getCurrentOperation()))
return;
// it is necessary to save current selection in order to restore it after the values are modifed
return;
// visualize the current operation feature
- myIsPropertyPanelValueChanged = true;
- ModuleBase_Operation* aOperation = getCurrentOperation();
+ //myIsResetCurrentValue = false;
+ operationMgr()->onValidateOperation();
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
- FeaturePtr aFeature = getCurrentOperation()->feature();
- visualizeFeature(aOperation, canDisplayObject(aFeature));
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
}
void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
if (!aViewer->canDragByMouse())
return;
- ModuleBase_Operation* aOperation = getCurrentOperation();
- if (aOperation && aOperation->isEditOperation()) {
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (!aFOperation)
+ return;
+
+ if (aFOperation->isEditOperation()) {
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
ModuleBase_ModelWidget* aActiveWgt = aPanel->activeWidget();
- // If the current widget is a selector, do do nothing, it processes the mouse press
+ // If the current widget is a selector, do nothing, it processes the mouse press
if(aActiveWgt && aActiveWgt->isViewerSelector()) {
return;
}
}
// Use only for sketch operations
- if (aOperation && myCurrentSketch) {
+ if (myCurrentSketch) {
if (!PartSet_Tools::sketchPlane(myCurrentSketch))
return;
- bool isSketcher = isSketchOperation(aOperation);
- bool isSketchOpe = isNestedSketchOperation(aOperation);
+ bool isSketcher = isSketchOperation(aFOperation);
+ bool isSketchOpe = isNestedSketchOperation(aFOperation);
// Avoid non-sketch operations
if ((!isSketchOpe) && (!isSketcher))
return;
- bool isEditing = aOperation->isEditOperation();
+ bool isEditing = aFOperation->isEditOperation();
// Ignore creation sketch operation
if ((!isSketcher) && (!isEditing))
return;
- // MoveTo in order to highlight current object
- aViewer->AISContext()->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
-
+ Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+ if (!aContext.IsNull()) {
+ // MoveTo in order to highlight current object
+ aContext->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
+ }
// Remember highlighted objects for editing
ModuleBase_ISelection* aSelect = aWorkshop->selection();
if (myCurrentSelection.empty()) {
if (isSketchOpe && (!isSketcher))
// commit previous operation
- if (!aOperation->commit())
- aOperation->abort();
+ if (!aFOperation->commit())
+ aFOperation->abort();
return;
}
// Init flyout point for radius rotation
myIsDragging = true;
get2dPoint(theWnd, theEvent, myCurrentPoint);
myDragDone = false;
+ // TODO: Has to be uncommented when SALOME patch on draw mode become avialable
+ myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
launchEditing();
if (aFeature.get() != NULL) {
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
}
} else if (isSketchOpe && isEditing) {
// If selected another object commit current result
- aOperation->commit();
+ aFOperation->commit();
myIsDragging = true;
get2dPoint(theWnd, theEvent, myCurrentPoint);
myDragDone = false;
+ // TODO: Has to be uncommented when SALOME patch on draw mode become avialable
+ myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
// This is necessary in order to finalize previous operation
QApplication::processEvents();
if (myDragDone) {
//aOp->commit();
myCurrentSelection.clear();
+ /*Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+ if (!aContext.IsNull()) {
// Reselect edited object
- /*aViewer->AISContext()->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
+ aContext->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
if (theEvent->modifiers() & Qt::ShiftModifier)
- aViewer->AISContext()->ShiftSelect();
+ aContext->ShiftSelect();
else
- aViewer->AISContext()->Select();
- */
+ aContext->Select();
+ */
}
}
}
}
- aWorkshop->viewer()->enableSelection(myPreviousSelectionEnabled);
+ // TODO: Has to be uncommented when SALOME patch on draw mode become avialable
+ aWorkshop->viewer()->enableDrawMode(myPreviousDrawModeEnabled);
+ //aWorkshop->viewer()->enableSelection(myPreviousDrawModeEnabled);
myIsDragging = false;
}
}
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
- FeaturePtr aFeature = getCurrentOperation()->feature();
- visualizeFeature(aOperation, canDisplayObject(aFeature));
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
}
myClickedPoint.clear();
// 2. the enable selection in the viewer should be temporary switched off in order to ignore
// mouse press signal in the viewer(it call Select for AIS context and the dragged objects are
// deselected). This flag should be restored in the slot, processed the mouse release signal.
- ModuleBase_IViewer* aViewer = myModule->workshop()->viewer();
- aViewer->enableSelection(false);
- ModuleBase_Operation* aOperation = getCurrentOperation();
- if (!aOperation)
+ // TODO: Has to be commented out when SALOME patch on draw mode become avialable
+ //ModuleBase_IViewer* aViewer = myModule->workshop()->viewer();
+ //aViewer->enableSelection(false);
+
+ ModuleBase_Operation* aCurrentOperation = getCurrentOperation();
+ if (!aCurrentOperation)
return;
- if (isSketchOperation(aOperation))
+ if (isSketchOperation(aCurrentOperation))
return; // No edit operation activated
Handle(V3d_View) aView = theWnd->v3dView();
FeatureToSelectionMap::const_iterator anIt = myCurrentSelection.begin(),
aLast = myCurrentSelection.end();
// 4. the features and attributes modification(move)
+ bool isModified = false;
for (; anIt != aLast; anIt++) {
FeaturePtr aFeature = anIt.key();
if (aPoint.get() != NULL) {
bool isImmutable = aPoint->setImmutable(true);
aPoint->move(dX, dY);
+ isModified = true;
ModelAPI_EventCreator::get()->sendUpdated(aFeature, aMoveEvent);
aPoint->setImmutable(isImmutable);
}
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSketchFeature) {
aSketchFeature->move(dX, dY);
+ isModified = true;
ModelAPI_EventCreator::get()->sendUpdated(aSketchFeature, aMoveEvent);
}
}
}
+ // the modified state of the current operation should be updated if there are features, which
+ // were changed here
+ if (isModified) {
+ aCurrentOperation->onValuesChanged();
+ }
Events_Loop::loop()->flush(aMoveEvent); // up all move events - to be processed in the solver
//Events_Loop::loop()->flush(aUpdateEvent); // up update events - to redisplay presentations
void PartSet_SketcherMgr::onMouseDoubleClick(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
- ModuleBase_Operation* aOperation = getCurrentOperation();
- if (aOperation && aOperation->isEditOperation()) {
- std::string aId = aOperation->id().toStdString();
- if (isDistanceOperation(aOperation))
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation && aFOperation->isEditOperation()) {
+ std::string aId = aFOperation->id().toStdString();
+ if (isDistanceOperation(aFOperation))
{
// Activate dimension value editing on double click
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
// Find corresponded widget to activate value editing
foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
}
}
+bool PartSet_SketcherMgr::sketchSolverError()
+{
+ bool anError = false;
+ CompositeFeaturePtr aSketch = activeSketch();
+ if (aSketch.get()) {
+ AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());
+ anError = !aAttributeString->value().empty();
+ }
+ return anError;
+}
+
+QString PartSet_SketcherMgr::getFeatureError(const FeaturePtr& theFeature)
+{
+ QString anError = "";
+ if (!theFeature.get() || !theFeature->data()->isValid())
+ return anError;
+
+ CompositeFeaturePtr aSketch = activeSketch();
+ if (aSketch.get() && aSketch == theFeature) {
+ AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());
+ anError = aAttributeString->value().c_str();
+ }
+ else if (myIsResetCurrentValue) { // this flag do not allow commit of the current operation
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ if (aFeature.get() && aFeature == theFeature && isNestedCreateOperation(aFOperation)) {
+ QString anAttributeName = "";
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWgt = aPanel->activeWidget();
+ if (anActiveWgt) {
+ AttributePtr anAttr = aFeature->attribute(anActiveWgt->attributeID());
+ if (anAttr.get())
+ anAttributeName = anAttr->id().c_str();
+ }
+ anError = "Attribute \"" + anAttributeName + "\" is not initialized.";
+ }
+ }
+ }
+ return anError;
+}
const QStringList& PartSet_SketcherMgr::sketchOperationIdList()
{
aIds << SketchPlugin_ConstraintTangent::ID().c_str();
aIds << SketchPlugin_ConstraintCoincidence::ID().c_str();
aIds << SketchPlugin_ConstraintMirror::ID().c_str();
+ aIds << SketchPlugin_ConstraintAngle::ID().c_str();
aIds << SketchPlugin_MultiRotation::ID().c_str();
aIds << SketchPlugin_MultiTranslation::ID().c_str();
}
bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation)
{
- return theOperation && !theOperation->isEditOperation() && isNestedSketchOperation(theOperation);
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ return aFOperation && !aFOperation->isEditOperation() && isNestedSketchOperation(aFOperation);
}
bool PartSet_SketcherMgr::isEntity(const std::string& theId)
return (aId == SketchPlugin_ConstraintLength::ID()) ||
(aId == SketchPlugin_ConstraintDistance::ID()) ||
- (aId == SketchPlugin_ConstraintRadius::ID());
+ (aId == SketchPlugin_ConstraintRadius::ID()) ||
+ (aId == SketchPlugin_ConstraintAngle::ID());
}
void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)
{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (!aFOperation)
+ return;
+
+ myModule->onViewTransformed();
+
// Display all sketcher sub-Objects
- myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(theOperation->feature());
+ myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFOperation->feature());
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
// Hide sketcher result
myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
myModule->workshop()->viewer()->addSelectionFilter(myPlaneFilter);
- if (theOperation->isEditOperation()) {
+
+ bool aHasPlane = false;
+ std::shared_ptr<GeomAPI_Pln> aPln;
+ if (aFOperation->isEditOperation()) {
// If it is editing of sketch then it means that plane is already defined
- std::shared_ptr<GeomAPI_Pln> aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
+ aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
if (aPln.get())
- myPlaneFilter->setPlane(aPln->impl<gp_Pln>());
+ aHasPlane = true;
}
+ myPlaneFilter->setPlane(aPln);
+
Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
// all sketch objects should be activated in the sketch selection modes by edit operation start
// in case of creation operation, there is an active widget, which activates own selection mode
- if (theOperation->isEditOperation())
+ if (aFOperation->isEditOperation() && aHasPlane)
aConnector->activateModuleSelectionModes();
}
}
}
else {
- // Hide all sketcher sub-Objects
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);
- std::list<ResultPtr> aResults = aFeature->results();
+ // Hide all sketcher sub-Objects
+ for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ (*aIt)->setDisplayed(false);
+ }
+ aFeature->setDisplayed(false);
+ }
+ // Display sketcher result
+ std::list<ResultPtr> aResults = myCurrentSketch->results();
std::list<ResultPtr>::const_iterator aIt;
+ Events_Loop* aLoop = Events_Loop::loop();
+ static Events_ID aDispEvent = aLoop->eventByName(EVENT_OBJECT_TO_REDISPLAY);
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- (*aIt)->setDisplayed(false);
+ if (!aFOperation->isDisplayedOnStart(*aIt)) {
+ (*aIt)->setDisplayed(true);
+ // this display event is needed because sketch already may have "displayed" state,
+ // but not displayed while it is still active (issue 613, abort of existing sketch)
+ ModelAPI_EventCreator::get()->sendUpdated(*aIt, aDispEvent);
+ }
}
- aFeature->setDisplayed(false);
- }
- // Display sketcher result
- std::list<ResultPtr> aResults = myCurrentSketch->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- (*aIt)->setDisplayed(true);
- }
- myCurrentSketch->setDisplayed(true);
+ if (!aFOperation->isDisplayedOnStart(myCurrentSketch))
+ myCurrentSketch->setDisplayed(true);
- myCurrentSketch = CompositeFeaturePtr();
- myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+ myCurrentSketch = CompositeFeaturePtr();
+ myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
+
+ Events_Loop::loop()->flush(aDispEvent);
}
// restore the module selection modes, which were changed on startSketch
aConnector->activateModuleSelectionModes();
void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
{
- if (constraintsIdList().contains(theOperation->id())) {
- // Show constraints if a constraint was created
- onShowConstraintsToggle(true);
- }
connectToPropertyPanel(true);
+ if (isNestedCreateOperation(theOperation) && myIsMouseOverWindow)
+ QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));//QIcon(":pictures/button_plus.png").pixmap(20,20)));
}
void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOp)
{
connectToPropertyPanel(false);
- myIsPropertyPanelValueChanged = false;
+ myIsResetCurrentValue = false;
myIsMouseOverViewProcessed = true;
+ operationMgr()->onValidateOperation();
+ if (isNestedCreateOperation(theOp))
+ QApplication::restoreOverrideCursor();
}
void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)
{
if (isNestedCreateOperation(theOperation)) {
- FeaturePtr aFeature = theOperation->feature();
- // it is necessary to check the the feature data validity because
- // some kind of features are removed by an operation commit(the macro state of a feature)
- if (aFeature.get() && aFeature->data()->isValid()) {
- visualizeFeature(theOperation, true);
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ // it is necessary to check the the feature data validity because
+ // some kind of features are removed by an operation commit(the macro state of a feature)
+ if (aFeature.get() && aFeature->data()->isValid()) {
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), true);
+ }
}
}
}
return isNestedCreateOperation(getCurrentOperation());
}
+bool PartSet_SketcherMgr::canCommitOperation() const
+{
+ bool aCanCommit = true;
+
+ if (isNestedCreateOperation(getCurrentOperation()) && myIsResetCurrentValue)
+ aCanCommit = false;
+
+ return aCanCommit;
+}
+
+bool PartSet_SketcherMgr::canEraseObject(const ObjectPtr& theObject) const
+{
+ bool aCanErase = true;
+ // when the sketch operation is active, results of sketch sub-feature can not be hidden
+ if (myCurrentSketch.get()) {
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
+ if (aResult.get()) {
+ // Display sketcher objects
+ for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {
+
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator anIt;
+ for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {
+ aCanErase = *anIt != aResult;
+ }
+ }
+ }
+ }
+ return aCanErase;
+}
+
bool PartSet_SketcherMgr::canDisplayObject(const ObjectPtr& theObject) const
{
bool aCanDisplay = true;
// 3. the method should not filter the objects, which are not related to the current operation.
// The object is filtered just if it is a current operation feature or this feature result
bool isObjectFound = false;
- ModuleBase_Operation* anOperation = getCurrentOperation();
- if (anOperation) {
- FeaturePtr aFeature = anOperation->feature();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
if (aFeature.get()) {
std::list<ResultPtr> aResults = aFeature->results();
if (theObject == aFeature)
isObjectFound = true;
else {
std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLast = aResults.end();
- for (; anIt != aLast; anIt++) {
+ for (; anIt != aLast && !isObjectFound; anIt++) {
isObjectFound = *anIt == theObject;
}
}
bool PartSet_SketcherMgr::canDisplayCurrentCreatedFeature() const
{
- return myIsPropertyPanelValueChanged || myIsMouseOverWindow;
+ return myIsMouseOverWindow || !myIsResetCurrentValue;
#ifdef DEBUG_MOUSE_OVER_WINDOW_FLAGS
qDebug(QString("canDisplayCurrentCreatedFeature: %1").arg(mouseOverWindowFlagsInfo()).toStdString().c_str());
#endif
void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
{
- myPlaneFilter->setPlane(thePln->impl<gp_Pln>());
+ if (myPlaneFilter.IsNull())
+ myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
+
+ myPlaneFilter->setPlane(thePln);
}
void PartSet_SketcherMgr::getCurrentSelection(const FeaturePtr& theFeature,
ModuleBase_IViewer* aViewer = theWorkshop->viewer();
Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ if (!aContext.IsNull()) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
- std::list<ResultPtr> aResults = theFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
- {
- ResultPtr aResult = *aIt;
- AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
- if (aAISObj.get() == NULL)
- continue;
- Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
- for (aContext->InitSelected(); aContext->MoreSelected(); aContext->NextSelected())
+ std::list<ResultPtr> aResults = theFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
{
- Handle(StdSelect_BRepOwner) aBRepOwner = Handle(StdSelect_BRepOwner)::DownCast(
- aContext->SelectedOwner());
- if (aBRepOwner.IsNull())
- continue;
- Handle(AIS_InteractiveObject) anIO = Handle(AIS_InteractiveObject)::DownCast(
- aBRepOwner->Selectable());
- if (anIO != anAISIO)
+ ResultPtr aResult = *aIt;
+ AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
+ if (aAISObj.get() == NULL)
continue;
-
- if (aBRepOwner->HasShape()) {
- const TopoDS_Shape& aShape = aBRepOwner->Shape();
- TopAbs_ShapeEnum aShapeType = aShape.ShapeType();
- if (aShapeType == TopAbs_VERTEX) {
- AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature,
- aShape, theSketch);
- if (aPntAttr.get() != NULL)
- aSelectedAttributes.insert(aPntAttr);
- }
- else if (aShapeType == TopAbs_EDGE &&
- aSelectedResults.find(aResult) == aSelectedResults.end()) {
- aSelectedResults.insert(aResult);
- }
+ Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
+ for (aContext->InitSelected(); aContext->MoreSelected(); aContext->NextSelected())
+ {
+ Handle(SelectMgr_EntityOwner) anOwner = aContext->SelectedOwner();
+ if (anOwner->Selectable() != anAISIO)
+ continue;
+ getAttributesOrResults(anOwner, theFeature, theSketch, aResult,
+ aSelectedAttributes, aSelectedResults);
+ }
+ for (aContext->InitDetected(); aContext->MoreDetected(); aContext->NextDetected()) {
+ Handle(SelectMgr_EntityOwner) anOwner = aContext->DetectedOwner();
+ if (anOwner.IsNull())
+ continue;
+ if (anOwner->Selectable() != anAISIO)
+ continue;
+ getAttributesOrResults(anOwner, theFeature, theSketch, aResult,
+ aSelectedAttributes, aSelectedResults);
}
}
}
const FeaturePtr& theSketch,
ModuleBase_IWorkshop* theWorkshop,
const FeatureToSelectionMap& theSelection,
- SelectMgr_IndexedMapOfOwner& anOwnersToSelect)
+ SelectMgr_IndexedMapOfOwner& theOwnersToSelect)
{
if (theFeature.get() == NULL)
return;
std::set<ResultPtr> aSelectedResults = anIt.value().second;
ModuleBase_IViewer* aViewer = theWorkshop->viewer();
- Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
if (aAISObj.get() != NULL && aSelectedAttributes.empty() && aSelectedResults.empty()) {
Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
- SelectMgr_IndexedMapOfOwner aSelectedOwners;
+ SelectMgr_IndexedMapOfOwner aSelectedOwners;
aConnector->workshop()->selector()->selection()->entityOwners(anAISIO, aSelectedOwners);
for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {
Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);
if (!anOwner.IsNull())
- anOwnersToSelect.Add(anOwner);
+ theOwnersToSelect.Add(anOwner);
}
}
AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);
if (aPntAttr.get() != NULL &&
aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end()) {
- anOwnersToSelect.Add(anOwner);
+ theOwnersToSelect.Add(anOwner);
}
}
else if (aShapeType == TopAbs_EDGE) {
bool aFound = aSelectedResults.find(aResult) != aSelectedResults.end();
if (aSelectedResults.find(aResult) != aSelectedResults.end() &&
- anOwnersToSelect.FindIndex(anOwner) <= 0)
- anOwnersToSelect.Add(anOwner);
+ theOwnersToSelect.FindIndex(anOwner) <= 0)
+ theOwnersToSelect.Add(anOwner);
}
}
}
return myModule->workshop()->currentOperation();
}
-void PartSet_SketcherMgr::visualizeFeature(ModuleBase_Operation* theOperation,
+void PartSet_SketcherMgr::visualizeFeature(const FeaturePtr& theFeature,
+ const bool isEditOperation,
const bool isToDisplay,
const bool isFlushRedisplay)
{
return;
#endif
- if (!theOperation || theOperation->isEditOperation())
+ if (isEditOperation || !theFeature.get())
return;
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
// 1. change visibility of the object itself, here the presentable object is processed,
// e.g. constraints features
- FeaturePtr aFeature = theOperation->feature();
- std::list<ResultPtr> aResults = aFeature->results();
+ //FeaturePtr aFeature = aFOperation->feature();
+ std::list<ResultPtr> aResults = theFeature->results();
if (isToDisplay)
- aFeature->setDisplayed(true);
+ theFeature->setDisplayed(true);
else
- aFeature->setDisplayed(false);
+ theFeature->setDisplayed(false);
// change visibility of the object results, e.g. non-constraint features
std::list<ResultPtr>::const_iterator aIt;
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
ModuleBase_ISelection* aSelect = aWorkshop->selection();
QList<ModuleBase_ViewerPrs> aHighlighted = aSelect->getHighlighted();
-
- QMap<FeaturePtr, QList<AttributePtr> > aFeature2AttributeMap;
+
+ QList<FeaturePtr> aFeatureList;
if (theHighlightedOnly) {
- fillFeature2Attribute(aHighlighted, aFeature2AttributeMap, myCurrentSketch);
+ fillFeatureList(aHighlighted, myCurrentSketch, aFeatureList);
}
else {
- fillFeature2Attribute(aHighlighted, aFeature2AttributeMap, myCurrentSketch);
+ fillFeatureList(aHighlighted, myCurrentSketch, aFeatureList);
- QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
- fillFeature2Attribute(aSelected, aFeature2AttributeMap, myCurrentSketch);
+ QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected(ModuleBase_ISelection::AllControls);
+ fillFeatureList(aSelected, myCurrentSketch, aFeatureList);
}
// 1. it is necessary to save current selection in order to restore it after the features moving
myCurrentSelection.clear();
- QMap<FeaturePtr, QList<AttributePtr> >::const_iterator anIt = aFeature2AttributeMap.begin(),
- aLast = aFeature2AttributeMap.end();
+ QList<FeaturePtr>::const_iterator anIt = aFeatureList.begin(), aLast = aFeatureList.end();
for (; anIt != aLast; anIt++) {
- FeaturePtr aFeature = anIt.key();
- getCurrentSelection(aFeature, myCurrentSketch, aWorkshop, myCurrentSelection);
+ getCurrentSelection(*anIt, myCurrentSketch, aWorkshop, myCurrentSelection);
}
//qDebug(QString(" storeSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
}
QString PartSet_SketcherMgr::mouseOverWindowFlagsInfo() const
{
- return QString("myIsPropertyPanelValueChanged = %1, myIsMouseOverWindow = %2")
- .arg(myIsPropertyPanelValueChanged).arg(myIsMouseOverWindow);
+ return QString("myIsResetCurrentValue = %1, myIsMouseOverWindow = %2")
+ .arg(myIsResetCurrentValue).arg(myIsMouseOverWindow);
+}
+
+XGUI_OperationMgr* PartSet_SketcherMgr::operationMgr() const
+{
+ ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+
+ return aWorkshop->operationMgr();
}
