#include "PartSet_WidgetPoint2d.h"
#include "PartSet_WidgetPoint2dDistance.h"
#include "PartSet_Tools.h"
+#include "PartSet_WidgetSketchLabel.h"
#include <ModuleBase_WidgetEditor.h>
#include <XGUI_ModuleConnector.h>
#include <XGUI_Displayer.h>
#include <XGUI_Workshop.h>
+#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Selection.h>
#include <XGUI_SelectionMgr.h>
#include <ModuleBase_ModelWidget.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
#include <SketchPlugin_ConstraintRigid.h>
+#include <SketchPlugin_ConstraintHorizontal.h>
+#include <SketchPlugin_ConstraintVertical.h>
+#include <SketchPlugin_ConstraintEqual.h>
+#include <SketchPlugin_ConstraintTangent.h>
+#include <SketchPlugin_ConstraintCoincidence.h>
+#include <SketchPlugin_ConstraintFillet.h>
+#include <SketchPlugin_ConstraintMirror.h>
+
+#include <SketcherPrs_Tools.h>
#include <SelectMgr_IndexedMapOfOwner.hxx>
#include <StdSelect_BRepOwner.hxx>
//#include <AIS_DimensionSelectionMode.hxx>
-//#include <AIS_Shape.hxx>
+#include <AIS_Shape.hxx>
#include <ModelAPI_Events.h>
+#include <ModelAPI_Session.h>
#include <QMouseEvent>
#include <QApplication>
+//#define DEBUG_DO_NOT_BY_ENTER
/// Returns list of unique objects by sum of objects from List1 and List2
/*QList<ModuleBase_ViewerPrs> getSumList(const QList<ModuleBase_ViewerPrs>& theList1,
PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)
: QObject(theModule), myModule(theModule), myIsDragging(false), myDragDone(false),
myIsPropertyPanelValueChanged(false), myIsMouseOverWindow(false),
- myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true)
+ myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
+ myIsPopupMenuActive(false), myIsConstraintsShown(true)
{
ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
void PartSet_SketcherMgr::onEnterViewPort()
{
- if (!isNestedCreateOperation(getCurrentOperation()))
- return;
// 1. if the mouse over window, update the next flag. Do not perform update visibility of
// created feature because it should be done in onMouseMove(). Some widgets watch
// the mouse move and use the cursor position to update own values. If the presentaion is
// redisplayed before this update, the feature presentation jumps from reset value to current.
myIsMouseOverWindow = true;
myIsPropertyPanelValueChanged = false;
+
+ #ifdef DEBUG_DO_NOT_BY_ENTER
+ return;
+ #endif
+ //if (!isNestedCreateOperation(getCurrentOperation()))
+ // return;
}
void PartSet_SketcherMgr::onLeaveViewPort()
{
- if (!isNestedCreateOperation(getCurrentOperation()))
- return;
-
myIsMouseOverViewProcessed = false;
myIsMouseOverWindow = false;
+ myIsPropertyPanelValueChanged = false;
+
+ #ifdef DEBUG_DO_NOT_BY_ENTER
+ return;
+ #endif
+
+ if (!isNestedCreateOperation(getCurrentOperation()))
+ return;
+ // the method should be performed if the popup menu is called,
+ // the reset of the current widget should not happen
+ if (myIsPopupMenuActive)
+ return;
// 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
// hides the presentation of the current operation feature
- myIsPropertyPanelValueChanged = false;
+ //myIsPropertyPanelValueChanged = false;
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
- visualizeFeature(aOperation, canDisplayObject());
+ FeaturePtr aFeature = getCurrentOperation()->feature();
+ visualizeFeature(aOperation, canDisplayObject(aFeature));
}
void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()
ModuleBase_Operation* aOperation = getCurrentOperation();
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
- visualizeFeature(aOperation, canDisplayObject());
+ FeaturePtr aFeature = getCurrentOperation()->feature();
+ visualizeFeature(aOperation, canDisplayObject(aFeature));
}
void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
}
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
- visualizeFeature(aOperation, canDisplayObject());
+ FeaturePtr aFeature = getCurrentOperation()->feature();
+ visualizeFeature(aOperation, canDisplayObject(aFeature));
}
myClickedPoint.clear();
XGUI_ViewerProxy* aViewerProxy = aWorkshop->viewer();
connect(aViewerProxy, SIGNAL(enterViewPort()), this, SLOT(onEnterViewPort()));
connect(aViewerProxy, SIGNAL(leaveViewPort()), this, SLOT(onLeaveViewPort()));
+
+ XGUI_ContextMenuMgr* aContextMenuMgr = aWorkshop->contextMenuMgr();
+ connect(aContextMenuMgr, SIGNAL(beforeContextMenu()), this, SLOT(onBeforeContextMenu()));
+ connect(aContextMenuMgr, SIGNAL(afterContextMenu()), this, SLOT(onAfterContextMenu()));
}
void PartSet_SketcherMgr::onBeforeWidgetActivated(ModuleBase_ModelWidget* theWidget)
}
}
+void PartSet_SketcherMgr::onBeforeContextMenu()
+{
+ myIsPopupMenuActive = true;
+}
+
+void PartSet_SketcherMgr::onAfterContextMenu()
+{
+ myIsPopupMenuActive = false;
+}
+
void PartSet_SketcherMgr::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
Point& thePoint)
{
void PartSet_SketcherMgr::launchEditing()
{
- // there should be activate the vertex selection mode because the edit can happens by the selected
- // point
- QIntList aModes;
- aModes << TopAbs_VERTEX << TopAbs_EDGE;
- // TODO: #391 - to be uncommented
- /*aModes.append(AIS_DSM_Text);
- aModes.append(AIS_DSM_Line);
- aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_VERTEX));
- aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_EDGE));*/
-
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
- aConnector->activateSubShapesSelection(aModes);
+ // there should be activate the sketch selection mode because the edit can happens
+ // by any sketch entity or consttant selected
+ activateObjectsInSketchMode(true);
if (!myCurrentSelection.empty()) {
FeaturePtr aFeature = myCurrentSelection.begin().key();
}
-QStringList PartSet_SketcherMgr::sketchOperationIdList()
+const QStringList& PartSet_SketcherMgr::sketchOperationIdList()
{
static QStringList aIds;
if (aIds.size() == 0) {
aIds << SketchPlugin_ConstraintRadius::ID().c_str();
aIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
aIds << SketchPlugin_ConstraintParallel::ID().c_str();
+ aIds << SketchPlugin_ConstraintHorizontal::ID().c_str();
+ aIds << SketchPlugin_ConstraintVertical::ID().c_str();
+ aIds << SketchPlugin_ConstraintEqual::ID().c_str();
+ aIds << SketchPlugin_ConstraintTangent::ID().c_str();
+ aIds << SketchPlugin_ConstraintCoincidence::ID().c_str();
+ aIds << SketchPlugin_ConstraintFillet::ID().c_str();
+ aIds << SketchPlugin_ConstraintMirror::ID().c_str();
+ }
+ return aIds;
+}
+
+const QStringList& PartSet_SketcherMgr::constraintsIdList()
+{
+ static QStringList aIds;
+ if (aIds.size() == 0) {
+ aIds << SketchPlugin_ConstraintLength::ID().c_str();
+ aIds << SketchPlugin_ConstraintDistance::ID().c_str();
+ aIds << SketchPlugin_ConstraintRigid::ID().c_str();
+ aIds << SketchPlugin_ConstraintRadius::ID().c_str();
+ aIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
+ aIds << SketchPlugin_ConstraintParallel::ID().c_str();
+ aIds << SketchPlugin_ConstraintHorizontal::ID().c_str();
+ aIds << SketchPlugin_ConstraintVertical::ID().c_str();
+ aIds << SketchPlugin_ConstraintEqual::ID().c_str();
+ aIds << SketchPlugin_ConstraintTangent::ID().c_str();
+ aIds << SketchPlugin_ConstraintCoincidence::ID().c_str();
+ aIds << SketchPlugin_ConstraintMirror::ID().c_str();
}
return aIds;
}
+
bool PartSet_SketcherMgr::isSketchOperation(ModuleBase_Operation* theOperation)
{
return theOperation && theOperation->id().toStdString() == SketchPlugin_Sketch::ID();
PartSet_SketcherMgr::sketchOperationIdList().contains(theOperation->id());
}
+bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation)
+{
+ return theOperation && !theOperation->isEditOperation() && isNestedSketchOperation(theOperation);
+}
+
+bool PartSet_SketcherMgr::isEntityOperation(ModuleBase_Operation* theOperation)
+{
+ std::string aId = theOperation ? theOperation->id().toStdString() : "";
+
+ return (aId == SketchPlugin_Line::ID()) ||
+ (aId == SketchPlugin_Point::ID()) ||
+ (aId == SketchPlugin_Arc::ID()) ||
+ (aId == SketchPlugin_Circle::ID());
+}
+
bool PartSet_SketcherMgr::isDistanceOperation(ModuleBase_Operation* theOperation)
{
std::string aId = theOperation ? theOperation->id().toStdString() : "";
void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)
{
myIsMouseOverWindow = false;
+ myIsConstraintsShown = true;
+ // the objects activated in the sketch should be deactivated in order to do not have the specific
+ // sketch selection mode activated on objects in neutral point of the application(no started operation)
+ activateObjectsInSketchMode(false);
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
aDisplayer->updateViewer();
}
-void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* )
+void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
{
+ if (constraintsIdList().contains(theOperation->id())) {
+ // Show constraints if a constraint was created
+ onShowConstraintsToggle(true);
+ }
connectToPropertyPanel(true);
}
-void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOperation)
+void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOp)
{
connectToPropertyPanel(false);
myIsPropertyPanelValueChanged = false;
myIsMouseOverViewProcessed = true;
+
+ // the sketch objects selection should be activated in order to select any sketch
+ // object
+ activateObjectsInSketchMode(true);
}
void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)
{
if (isNestedCreateOperation(theOperation))
visualizeFeature(theOperation, true);
+
}
bool PartSet_SketcherMgr::canUndo() const
return isNestedCreateOperation(getCurrentOperation());
}
-bool PartSet_SketcherMgr::canDisplayObject() const
+bool PartSet_SketcherMgr::canDisplayObject(const ObjectPtr& theObject) const
{
bool aCanDisplay = true;
- if (!isNestedCreateOperation(getCurrentOperation()))
- return aCanDisplay;
- ModuleBase_Operation* aOperation = getCurrentOperation();
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* anActiveWdg = aPanel ? aPanel->activeWidget() : 0;
- // the active widget editor should not influence here. The presentation should be visible always
- // when this widget is active.
- if (anActiveWdg) {
- ModuleBase_WidgetEditor* anEditorWdg = dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWdg);
- if (anEditorWdg) {
- return aCanDisplay;
+ bool aHasActiveSketch = activeSketch().get() != NULL;
+ if (aHasActiveSketch) {
+ // 1. the sketch feature should not be displayed during the sketch active operation
+ // it is hidden by a sketch operation start and shown by a sketch stop, just the sketch
+ // nested features can be visualized
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get() != NULL && aFeature == activeSketch())
+ aCanDisplay = false;
+ }
+ else { // there are no an active sketch
+ // 2. sketch sub-features should not visualized if the sketch operation is not active
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get() != NULL) {
+ std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSketchFeature.get())
+ aCanDisplay = false;
}
}
- // during a nested create operation, the feature is redisplayed only if the mouse over view
- // of there was a value modified in the property panel after the mouse left the view
- aCanDisplay = myIsPropertyPanelValueChanged || myIsMouseOverWindow;
+ // 3. For created nested feature operation do not display the created feature if
+ // the mouse curstor leaves the OCC window.
+ // The correction cases, which ignores this condition:
+ // a. the property panel values modification
+ // b. the popup menu activated
+ // c. widget editor control
+ #ifndef DEBUG_DO_NOT_BY_ENTER
+ if (aCanDisplay && isNestedCreateOperation(getCurrentOperation())) {
+ ModuleBase_Operation* aOperation = getCurrentOperation();
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWdg = aPanel ? aPanel->activeWidget() : 0;
+ ModuleBase_WidgetEditor* anEditorWdg = anActiveWdg ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWdg) : 0;
+ // the active widget editor should not influence here. The presentation should be visible always
+ // when this widget is active.
+ if (!anEditorWdg && !myIsPopupMenuActive) {
+ // during a nested create operation, the feature is redisplayed only if the mouse over view
+ // of there was a value modified in the property panel after the mouse left the view
+ aCanDisplay = myIsPropertyPanelValueChanged || myIsMouseOverWindow;
+ }
+ }
+ #endif
return aCanDisplay;
}
+
void PartSet_SketcherMgr::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
{
myPlaneFilter->setPlane(thePln->impl<gp_Pln>());
+
+ // after the plane is selected in the sketch, the sketch selection should be activated
+ // it can not be performed in the sketch label widget because, we don't need to switch off
+ // the selection by any label deactivation, but need to switch it off by stop the sketch
+ activateObjectsInSketchMode(true);
}
void PartSet_SketcherMgr::getCurrentSelection(const FeaturePtr& theFeature,
return myModule->workshop()->currentOperation();
}
-bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation) const
-{
- return theOperation && !theOperation->isEditOperation() && isNestedSketchOperation(theOperation);
-}
-
void PartSet_SketcherMgr::visualizeFeature(ModuleBase_Operation* theOperation,
const bool isToDisplay)
{
+ #ifdef DEBUG_DO_NOT_BY_ENTER
+ return;
+ #endif
+
if (!theOperation || theOperation->isEditOperation())
return;
aDisplayer->updateViewer();
}
-void PartSet_SketcherMgr::storeSelection(const bool theHighlightedOnly)
+void PartSet_SketcherMgr::activateObjectsInSketchMode(const bool isActive)
{
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ QIntList aModes;
+ if (isActive) {
+ aModes.append(SketcherPrs_Tools::Sel_Dimension_Text);
+ aModes.append(SketcherPrs_Tools::Sel_Dimension_Line);
+ aModes.append(SketcherPrs_Tools::Sel_Constraint);
+ aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_VERTEX));
+ aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_EDGE));
+ }
+ aDisplayer->activateObjects(aModes);
+}
+
+void PartSet_SketcherMgr::storeSelection(const bool theHighlightedOnly)
+{
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
ModuleBase_ISelection* aSelect = aWorkshop->selection();
QList<ModuleBase_ViewerPrs> aHighlighted = aSelect->getHighlighted();
FeaturePtr aFeature = anIt.key();
getCurrentSelection(aFeature, myCurrentSketch, aWorkshop, myCurrentSelection);
}
- qDebug(QString(" storeSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
+ //qDebug(QString(" storeSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
}
void PartSet_SketcherMgr::restoreSelection()
{
- qDebug(QString("restoreSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
+ //qDebug(QString("restoreSelection: %1").arg(myCurrentSelection.size()).toStdString().c_str());
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
FeatureToSelectionMap::const_iterator aSIt = myCurrentSelection.begin(),
aConnector->workshop()->selector()->setSelectedOwners(anOwnersToSelect, false);
}
}
+
+void PartSet_SketcherMgr::onShowConstraintsToggle(bool theOn)
+{
+ if (myIsConstraintsShown == theOn)
+ return;
+ if (myCurrentSketch.get() == NULL)
+ return;
+
+ myIsConstraintsShown = theOn;
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+
+ const QStringList& aConstrIds = constraintsIdList();
+ for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
+ FeaturePtr aSubFeature = myCurrentSketch->subFeature(i);
+ if (aConstrIds.contains(QString(aSubFeature->getKind().c_str()))) {
+ if (myIsConstraintsShown)
+ aDisplayer->display(aSubFeature, false);
+ else
+ aDisplayer->erase(aSubFeature, false);
+ }
+ }
+ aDisplayer->updateViewer();
+}