// Author: Vitaly SMETANNIKOV
#include "PartSet_SketcherMgr.h"
+#include "PartSet_SketcherReetntrantMgr.h"
#include "PartSet_Module.h"
#include "PartSet_WidgetPoint2d.h"
#include "PartSet_WidgetPoint2dDistance.h"
#include "PartSet_Tools.h"
#include "PartSet_WidgetSketchLabel.h"
-
-#include <ModuleBase_WidgetEditor.h>
-#include <ModuleBase_ModelWidget.h>
+#include "PartSet_WidgetEditor.h"
#include <XGUI_ModuleConnector.h>
#include <XGUI_Displayer.h>
#include <XGUI_ViewerProxy.h>
#include <XGUI_OperationMgr.h>
+#include <ModuleBase_IPropertyPanel.h>
+#include <ModuleBase_ISelection.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IWorkshop.h>
#include <ModuleBase_IViewWindow.h>
+#include <ModuleBase_ModelWidget.h>
#include <ModuleBase_Operation.h>
-#include <ModuleBase_ISelection.h>
-#include <ModuleBase_IPropertyPanel.h>
+#include <ModuleBase_OperationFeature.h>
#include <ModuleBase_Operation.h>
+#include <ModuleBase_WidgetEditor.h>
#include <GeomDataAPI_Point2D.h>
//#include <AIS_DimensionSelectionMode.hxx>
#include <AIS_Shape.hxx>
+#include <AIS_Dimension.hxx>
#include <ModelAPI_Events.h>
#include <ModelAPI_Session.h>
+#include <ModelAPI_AttributeString.h>
#include <QMouseEvent>
#include <QApplication>
+#include <QCursor>
+#include <QMessageBox>
//#define DEBUG_DO_NOT_BY_ENTER
-//#define DEBUG_MOUSE_OVER_WINDOW_FLAGS
+
+//#define DEBUG_CURSOR
/// Returns list of unique objects by sum of objects from List1 and List2
/*QList<ModuleBase_ViewerPrs> getSumList(const QList<ModuleBase_ViewerPrs>& theList1,
PartSet_SketcherMgr::PartSet_SketcherMgr(PartSet_Module* theModule)
: QObject(theModule), myModule(theModule), myIsDragging(false), myDragDone(false),
- myIsResetCurrentValue(false), myIsMouseOverWindow(false),
+ myIsMouseOverWindow(false),
myIsMouseOverViewProcessed(true), myPreviousUpdateViewerEnabled(true),
- myIsPopupMenuActive(false), myIsConstraintsShown(true)
+ myIsPopupMenuActive(false)
{
ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = anIWorkshop->viewer();
- myPreviousSelectionEnabled = true;//aViewer->isSelectionEnabled();
+ myPreviousDrawModeEnabled = true;//aViewer->isSelectionEnabled();
connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
connect(aWorkshop, SIGNAL(applicationStarted()), this, SLOT(onApplicationStarted()));
+
+ myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
+ myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
}
PartSet_SketcherMgr::~PartSet_SketcherMgr()
// the mouse move and use the cursor position to update own values. If the presentaion is
// redisplayed before this update, the feature presentation jumps from reset value to current.
myIsMouseOverWindow = true;
- myIsResetCurrentValue = false;
- operationMgr()->onValidateOperation();
-#ifdef DEBUG_MOUSE_OVER_WINDOW_FLAGS
- qDebug(QString("onEnterViewPort: %1").arg(mouseOverWindowFlagsInfo()).toStdString().c_str());
-#endif
#ifdef DEBUG_DO_NOT_BY_ENTER
return;
#endif
+ if (canChangeCursor(getCurrentOperation())) {
+ QCursor* aCurrentCursor = QApplication::overrideCursor();
+ if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
+ QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
+#ifdef DEBUG_CURSOR
+ qDebug("onEnterViewPort() : Qt::CrossCursor");
+#endif
+ }
+ }
+
if (!isNestedCreateOperation(getCurrentOperation()))
return;
+
+ operationMgr()->onValidateOperation();
+
// we need change displayed state of the current operation feature
// if the feature is presentable, e.g. distance construction. It has no results, so workshop does
// not accept a signal about the result created. Nothing is shown until mouse is moved out/in view
// port. If the isDisplayed flag is true, the presentable feature is displayed as soon as the
// presentation becomes valid and redisplay happens
- ModuleBase_Operation* aOperation = getCurrentOperation();
- if (aOperation) {
- FeaturePtr aFeature = aOperation->feature();
+ //ModuleBase_Operation* aOperation = getCurrentOperation();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
if (aFeature.get() && aFeature->data()->isValid()) {
- visualizeFeature(aOperation, canDisplayObject(aFeature), false);
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature), false);
}
}
}
{
myIsMouseOverViewProcessed = false;
myIsMouseOverWindow = false;
- operationMgr()->onValidateOperation();
-#ifdef DEBUG_MOUSE_OVER_WINDOW_FLAGS
- qDebug(QString("onLeaveViewPort: %1").arg(mouseOverWindowFlagsInfo()).toStdString().c_str());
-#endif
+ // it is important to validate operation here only if sketch entity create operation is active
+ // because at this operation we reacts to the mouse leave/enter view port
+ //operationMgr()->onValidateOperation();
#ifdef DEBUG_DO_NOT_BY_ENTER
return;
#endif
+ if (canChangeCursor(getCurrentOperation())) {
+ QApplication::restoreOverrideCursor();
+#ifdef DEBUG_CURSOR
+ qDebug("onLeaveViewPort() : None");
+#endif
+ }
+
if (!isNestedCreateOperation(getCurrentOperation()))
return;
+
// the method should be performed if the popup menu is called,
// the reset of the current widget should not happen
if (myIsPopupMenuActive)
return;
+ operationMgr()->onValidateOperation();
+
// 2. if the mouse IS NOT over window, reset the active widget value and hide the presentation
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
// disable the viewer update in order to avoid visualization of redisplayed feature in viewer
// obtained after reset value
bool isEnableUpdateViewer = aDisplayer->enableUpdateViewer(false);
- ModuleBase_Operation* aOperation = getCurrentOperation();
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* aActiveWgt = aPanel->activeWidget();
- if (aActiveWgt && aActiveWgt->reset()) {
- myIsResetCurrentValue = true;
- }
- aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ if (anActiveWidget)
+ anActiveWidget->reset();
// hides the presentation of the current operation feature
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
- FeaturePtr aFeature = getCurrentOperation()->feature();
- visualizeFeature(aOperation, canDisplayObject(aFeature));
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
+ // we should update viewer after the presentation are hidden in the viewer
+ // otherwise the reset presentation(line) appears in the viewer(by quick move from viewer to PP)
+ aDisplayer->enableUpdateViewer(isEnableUpdateViewer);
}
void PartSet_SketcherMgr::onBeforeValuesChangedInPropertyPanel()
{
- if (isNestedCreateOperation(getCurrentOperation()))
+ if (!isNestedEditOperation(getCurrentOperation()) ||
+ myModule->sketchReentranceMgr()->isInternalEditActive())
return;
// it is necessary to save current selection in order to restore it after the values are modifed
storeSelection();
void PartSet_SketcherMgr::onAfterValuesChangedInPropertyPanel()
{
- if (isNestedCreateOperation(getCurrentOperation()))
+ if (!isNestedEditOperation(getCurrentOperation()) ||
+ myModule->sketchReentranceMgr()->isInternalEditActive())
return;
// it is necessary to restore current selection in order to restore it after the values are modified
restoreSelection();
aDisplayer->updateViewer();
}
-void PartSet_SketcherMgr::onValuesChangedInPropertyPanel()
+void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
- if (!isNestedCreateOperation(getCurrentOperation()))
+ if (myModule->sketchReentranceMgr()->processMousePressed(theWnd, theEvent))
return;
- // visualize the current operation feature
- myIsResetCurrentValue = false;
- operationMgr()->onValidateOperation();
- ModuleBase_Operation* aOperation = getCurrentOperation();
- // the feature is to be erased here, but it is correct to call canDisplayObject because
- // there can be additional check (e.g. editor widget in distance constraint)
- FeaturePtr aFeature = getCurrentOperation()->feature();
- visualizeFeature(aOperation, canDisplayObject(aFeature));
-}
-
-void PartSet_SketcherMgr::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
-{
- get2dPoint(theWnd, theEvent, myClickedPoint);
+ //get2dPoint(theWnd, theEvent, myClickedPoint);
if (!(theEvent->buttons() & Qt::LeftButton))
return;
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = aWorkshop->viewer();
- myPreviousSelectionEnabled = aViewer->isSelectionEnabled();
if (!aViewer->canDragByMouse())
return;
- ModuleBase_Operation* aOperation = getCurrentOperation();
- if (aOperation && aOperation->isEditOperation()) {
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* aActiveWgt = aPanel->activeWidget();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (!aFOperation)
+ return;
+
+ if (aFOperation->isEditOperation()) {
// If the current widget is a selector, do nothing, it processes the mouse press
- if(aActiveWgt && aActiveWgt->isViewerSelector()) {
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ if(anActiveWidget && anActiveWidget->isViewerSelector()) {
return;
}
}
// Use only for sketch operations
- if (aOperation && myCurrentSketch) {
+ if (myCurrentSketch) {
if (!PartSet_Tools::sketchPlane(myCurrentSketch))
return;
- bool isSketcher = isSketchOperation(aOperation);
- bool isSketchOpe = isNestedSketchOperation(aOperation);
+ bool isSketcher = isSketchOperation(aFOperation);
+ bool isSketchOpe = isNestedSketchOperation(aFOperation);
// Avoid non-sketch operations
if ((!isSketchOpe) && (!isSketcher))
return;
- bool isEditing = aOperation->isEditOperation();
+ bool isEditing = aFOperation->isEditOperation();
// Ignore creation sketch operation
if ((!isSketcher) && (!isEditing))
return;
- // MoveTo in order to highlight current object
- aViewer->AISContext()->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
-
+ Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+ if (!aContext.IsNull()) {
+ // MoveTo in order to highlight current object
+ aContext->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
+ }
// Remember highlighted objects for editing
ModuleBase_ISelection* aSelect = aWorkshop->selection();
if (myCurrentSelection.empty()) {
if (isSketchOpe && (!isSketcher))
// commit previous operation
- if (!aOperation->commit())
- aOperation->abort();
+ if (!aFOperation->commit())
+ aFOperation->abort();
return;
}
// Init flyout point for radius rotation
myIsDragging = true;
get2dPoint(theWnd, theEvent, myCurrentPoint);
myDragDone = false;
+
+ myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
launchEditing();
if (aFeature.get() != NULL) {
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
}
} else if (isSketchOpe && isEditing) {
// If selected another object commit current result
- aOperation->commit();
+ aFOperation->commit();
myIsDragging = true;
get2dPoint(theWnd, theEvent, myCurrentPoint);
myDragDone = false;
+ myPreviousDrawModeEnabled = aViewer->enableDrawMode(false);
+
+ // this is temporary commented in order to avoid the following wrong case:
+ // Distance constraint is under edition, double click on the digit -> nothing happens
+ // because QApplication::processEvents() calls onMouseDoubleClick, which try to show editor
+ // but as the prev edit is commited an new one is not started, editor is not shown.
// This is necessary in order to finalize previous operation
- QApplication::processEvents();
+ //QApplication::processEvents();
launchEditing();
}
}
void PartSet_SketcherMgr::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
+ if (myModule->sketchReentranceMgr()->processMouseReleased(theWnd, theEvent))
+ return;
+
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
ModuleBase_IViewer* aViewer = aWorkshop->viewer();
if (!aViewer->canDragByMouse())
ModuleBase_Operation* aOp = getCurrentOperation();
if (aOp) {
if (isNestedSketchOperation(aOp)) {
- get2dPoint(theWnd, theEvent, myClickedPoint);
+ //get2dPoint(theWnd, theEvent, myClickedPoint);
// Only for sketcher operations
if (myIsDragging) {
if (myDragDone) {
//aOp->commit();
myCurrentSelection.clear();
+ /*Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+ if (!aContext.IsNull()) {
// Reselect edited object
- /*aViewer->AISContext()->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
+ aContext->MoveTo(theEvent->x(), theEvent->y(), theWnd->v3dView());
if (theEvent->modifiers() & Qt::ShiftModifier)
- aViewer->AISContext()->ShiftSelect();
+ aContext->ShiftSelect();
else
- aViewer->AISContext()->Select();
- */
+ aContext->Select();
+ */
}
}
}
}
- aWorkshop->viewer()->enableSelection(myPreviousSelectionEnabled);
+
+ aWorkshop->viewer()->enableDrawMode(myPreviousDrawModeEnabled);
myIsDragging = false;
}
void PartSet_SketcherMgr::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
+ if (myModule->sketchReentranceMgr()->processMouseMoved(theWnd, theEvent))
+ return;
+
if (isNestedCreateOperation(getCurrentOperation()) && !myIsMouseOverViewProcessed) {
myIsMouseOverViewProcessed = true;
// 1. perform the widget mouse move functionality and display the presentation
- ModuleBase_Operation* aOperation = getCurrentOperation();
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* anActiveWdg = aPanel->activeWidget();
// the mouse move should be processed in the widget, if it can in order to visualize correct
// presentation. These widgets correct the feature attribute according to the mouse position
- PartSet_WidgetPoint2D* aPoint2DWdg = dynamic_cast<PartSet_WidgetPoint2D*>(anActiveWdg);
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ PartSet_WidgetPoint2D* aPoint2DWdg = dynamic_cast<PartSet_WidgetPoint2D*>(anActiveWidget);
if (aPoint2DWdg) {
aPoint2DWdg->onMouseMove(theWnd, theEvent);
}
PartSet_WidgetPoint2dDistance* aDistanceWdg = dynamic_cast<PartSet_WidgetPoint2dDistance*>
- (anActiveWdg);
+ (anActiveWidget);
if (aDistanceWdg) {
aDistanceWdg->onMouseMove(theWnd, theEvent);
}
// the feature is to be erased here, but it is correct to call canDisplayObject because
// there can be additional check (e.g. editor widget in distance constraint)
- FeaturePtr aFeature = getCurrentOperation()->feature();
- visualizeFeature(aOperation, canDisplayObject(aFeature));
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
+ }
}
- myClickedPoint.clear();
+ //myClickedPoint.clear();
if (myIsDragging) {
// 1. the current selection is saved in the mouse press method in order to restore it after moving
// 2. the enable selection in the viewer should be temporary switched off in order to ignore
// mouse press signal in the viewer(it call Select for AIS context and the dragged objects are
// deselected). This flag should be restored in the slot, processed the mouse release signal.
- ModuleBase_IViewer* aViewer = myModule->workshop()->viewer();
- aViewer->enableSelection(false);
ModuleBase_Operation* aCurrentOperation = getCurrentOperation();
if (!aCurrentOperation)
// were changed here
if (isModified) {
aCurrentOperation->onValuesChanged();
- ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
- aWorkshop->updateCompositeActionState();
}
Events_Loop::loop()->flush(aMoveEvent); // up all move events - to be processed in the solver
//Events_Loop::loop()->flush(aUpdateEvent); // up update events - to redisplay presentations
void PartSet_SketcherMgr::onMouseDoubleClick(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
{
- ModuleBase_Operation* aOperation = getCurrentOperation();
- if (aOperation && aOperation->isEditOperation()) {
- std::string aId = aOperation->id().toStdString();
- if (isDistanceOperation(aOperation))
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation && aFOperation->isEditOperation()) {
+ std::string aId = aFOperation->id().toStdString();
+ if (isDistanceOperation(aFOperation))
{
// Activate dimension value editing on double click
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
// Find corresponded widget to activate value editing
foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
if (aWgt->attributeID() == "ConstraintValue") {
- aWgt->focusTo();
+ PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
+ if (anEditor)
+ anEditor->showPopupEditor();
return;
}
}
ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
+ PartSet_SketcherReetntrantMgr* aReentranceMgr = myModule->sketchReentranceMgr();
+
XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
if (aPropertyPanel) {
- connect(aPropertyPanel, SIGNAL(beforeWidgetActivated(ModuleBase_ModelWidget*)),
- this, SLOT(onBeforeWidgetActivated(ModuleBase_ModelWidget*)));
+ //connect(aPropertyPanel, SIGNAL(beforeWidgetActivated(ModuleBase_ModelWidget*)),
+ // this, SLOT(onBeforeWidgetActivated(ModuleBase_ModelWidget*)));
+
+ connect(aPropertyPanel, SIGNAL(noMoreWidgets(const std::string&)),
+ aReentranceMgr, SLOT(onNoMoreWidgets(const std::string&)));
+ connect(aPropertyPanel, SIGNAL(widgetActivated(ModuleBase_ModelWidget*)),
+ aReentranceMgr, SLOT(onWidgetActivated()));
}
XGUI_ViewerProxy* aViewerProxy = aWorkshop->viewer();
connect(aContextMenuMgr, SIGNAL(afterContextMenu()), this, SLOT(onAfterContextMenu()));
}
-void PartSet_SketcherMgr::onBeforeWidgetActivated(ModuleBase_ModelWidget* theWidget)
-{
- if (!myClickedPoint.myIsInitialized)
- return;
+//void PartSet_SketcherMgr::onBeforeWidgetActivated(ModuleBase_ModelWidget* theWidget)
+//{
+ //if (!myClickedPoint.myIsInitialized)
+ // return;
- ModuleBase_Operation* aOperation = getCurrentOperation();
+ //ModuleBase_Operation* aOperation = getCurrentOperation();
// the distance constraint feature should not use the clickedd point
// this is workaround in order to don't throw down the flyout point value,
// set by execute() method of these type of features
- if (isDistanceOperation(aOperation))
- return;
+ //if (isDistanceOperation(aOperation))
+ // return;
- PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(theWidget);
- if (aPnt2dWgt) {
- aPnt2dWgt->setPoint(myClickedPoint.myCurX, myClickedPoint.myCurY);
- }
-}
+ //PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(theWidget);
+ //if (aPnt2dWgt) {
+ // aPnt2dWgt->setPoint(myClickedPoint.myCurX, myClickedPoint.myCurY);
+ //}
+//}
void PartSet_SketcherMgr::onBeforeContextMenu()
{
}
}
+bool PartSet_SketcherMgr::sketchSolverError()
+{
+ bool anError = false;
+ CompositeFeaturePtr aSketch = activeSketch();
+ if (aSketch.get()) {
+ AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());
+ anError = !aAttributeString->value().empty();
+ }
+ return anError;
+}
+
+QString PartSet_SketcherMgr::getFeatureError(const FeaturePtr& theFeature)
+{
+ QString anError = "";
+ if (!theFeature.get() || !theFeature->data()->isValid())
+ return anError;
+
+ CompositeFeaturePtr aSketch = activeSketch();
+ if (aSketch.get() && aSketch == theFeature) {
+ AttributeStringPtr aAttributeString = aSketch->string(SketchPlugin_Sketch::SOLVER_ERROR());
+ anError = aAttributeString->value().c_str();
+ }
+ return anError;
+}
+
+void PartSet_SketcherMgr::clearClickedFlags()
+{
+ //myClickedPoint.clear();
+ myCurrentPoint.clear();
+}
const QStringList& PartSet_SketcherMgr::sketchOperationIdList()
{
bool PartSet_SketcherMgr::isNestedCreateOperation(ModuleBase_Operation* theOperation)
{
- return theOperation && !theOperation->isEditOperation() && isNestedSketchOperation(theOperation);
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ return aFOperation && !aFOperation->isEditOperation() && isNestedSketchOperation(aFOperation);
+}
+
+bool PartSet_SketcherMgr::isNestedEditOperation(ModuleBase_Operation* theOperation)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ return aFOperation && aFOperation->isEditOperation() && isNestedSketchOperation(aFOperation);
}
bool PartSet_SketcherMgr::isEntity(const std::string& theId)
bool PartSet_SketcherMgr::isDistanceOperation(ModuleBase_Operation* theOperation)
{
- std::string aId = theOperation ? theOperation->id().toStdString() : "";
+ std::string anId = theOperation ? theOperation->id().toStdString() : "";
+
+ return isDistanceKind(anId);
+}
- return (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID()) ||
- (aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintAngle::ID());
+bool PartSet_SketcherMgr::isDistanceKind(std::string& theKind)
+{
+ return (theKind == SketchPlugin_ConstraintLength::ID()) ||
+ (theKind == SketchPlugin_ConstraintDistance::ID()) ||
+ (theKind == SketchPlugin_ConstraintRadius::ID()) ||
+ (theKind == SketchPlugin_ConstraintAngle::ID());
}
void PartSet_SketcherMgr::startSketch(ModuleBase_Operation* theOperation)
{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (!aFOperation)
+ return;
+
myModule->onViewTransformed();
// Display all sketcher sub-Objects
- myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(theOperation->feature());
+ myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFOperation->feature());
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
+ aConnector->workshop()->displayer()->activateTrihedron(true);
// Hide sketcher result
std::list<ResultPtr> aResults = myCurrentSketch->results();
bool aHasPlane = false;
std::shared_ptr<GeomAPI_Pln> aPln;
- if (theOperation->isEditOperation()) {
+ if (aFOperation->isEditOperation()) {
// If it is editing of sketch then it means that plane is already defined
aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
if (aPln.get())
Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
// all sketch objects should be activated in the sketch selection modes by edit operation start
// in case of creation operation, there is an active widget, which activates own selection mode
- if (theOperation->isEditOperation() && aHasPlane)
+ if (aFOperation->isEditOperation() && aHasPlane)
aConnector->activateModuleSelectionModes();
}
void PartSet_SketcherMgr::stopSketch(ModuleBase_Operation* theOperation)
{
myIsMouseOverWindow = false;
- myIsConstraintsShown = true;
-#ifdef DEBUG_MOUSE_OVER_WINDOW_FLAGS
- qDebug(QString("stopSketch: %1").arg(mouseOverWindowFlagsInfo()).toStdString().c_str());
-#endif
+ myIsConstraintsShown[PartSet_Tools::Geometrical] = true;
+ myIsConstraintsShown[PartSet_Tools::Dimensional] = true;
+
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myModule->workshop());
DataPtr aData = myCurrentSketch->data();
std::list<ResultPtr>::const_iterator aIt;
Events_Loop* aLoop = Events_Loop::loop();
static Events_ID aDispEvent = aLoop->eventByName(EVENT_OBJECT_TO_REDISPLAY);
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- (*aIt)->setDisplayed(true);
- // this display event is needed because sketch already may have "displayed" state,
- // but not displayed while it is still active (issue 613, abort of existing sketch)
- ModelAPI_EventCreator::get()->sendUpdated(*aIt, aDispEvent);
+ if (!aFOperation->isDisplayedOnStart(*aIt)) {
+ (*aIt)->setDisplayed(true);
+ // this display event is needed because sketch already may have "displayed" state,
+ // but not displayed while it is still active (issue 613, abort of existing sketch)
+ ModelAPI_EventCreator::get()->sendUpdated(*aIt, aDispEvent);
+ }
}
- myCurrentSketch->setDisplayed(true);
+ if (!aFOperation->isDisplayedOnStart(myCurrentSketch))
+ myCurrentSketch->setDisplayed(true);
myCurrentSketch = CompositeFeaturePtr();
myModule->workshop()->viewer()->removeSelectionFilter(myPlaneFilter);
}
// restore the module selection modes, which were changed on startSketch
aConnector->activateModuleSelectionModes();
+ aConnector->workshop()->displayer()->activateTrihedron(false);
}
void PartSet_SketcherMgr::startNestedSketch(ModuleBase_Operation* theOperation)
{
- if (constraintsIdList().contains(theOperation->id())) {
- // Show constraints if a constraint was created
- onShowConstraintsToggle(true);
+ if (canChangeCursor(theOperation) && myIsMouseOverWindow) {
+ QCursor* aCurrentCursor = QApplication::overrideCursor();
+ if (!aCurrentCursor || aCurrentCursor->shape() != Qt::CrossCursor) {
+ QApplication::setOverrideCursor(QCursor(Qt::CrossCursor));
+#ifdef DEBUG_CURSOR
+ qDebug("startNestedSketch() : Qt::CrossCursor");
+#endif
+ }
}
- connectToPropertyPanel(true);
}
-void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOp)
+void PartSet_SketcherMgr::stopNestedSketch(ModuleBase_Operation* theOperation)
{
- connectToPropertyPanel(false);
- myIsResetCurrentValue = false;
myIsMouseOverViewProcessed = true;
operationMgr()->onValidateOperation();
+ if (canChangeCursor(theOperation)) {
+ QApplication::restoreOverrideCursor();
+#ifdef DEBUG_CURSOR
+ qDebug("stopNestedSketch() : None");
+#endif
+ }
}
void PartSet_SketcherMgr::commitNestedSketch(ModuleBase_Operation* theOperation)
{
if (isNestedCreateOperation(theOperation)) {
- FeaturePtr aFeature = theOperation->feature();
- // it is necessary to check the the feature data validity because
- // some kind of features are removed by an operation commit(the macro state of a feature)
- if (aFeature.get() && aFeature->data()->isValid()) {
- visualizeFeature(theOperation, true);
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
+ // it is necessary to check the the feature data validity because
+ // some kind of features are removed by an operation commit(the macro state of a feature)
+ if (aFeature.get() && aFeature->data()->isValid()) {
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), true);
+ }
}
}
}
+void PartSet_SketcherMgr::operationActivatedByPreselection()
+{
+ ModuleBase_Operation* anOperation = getCurrentOperation();
+ if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ // Set final definitions if they are necessary
+ //propertyPanelDefined(aOperation);
+ /// Commit sketcher operations automatically
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (anOperation);
+ if (aFOperation) {
+ if (PartSet_SketcherMgr::isDistanceOperation(aFOperation)) {
+ FeaturePtr aFeature = aFOperation->feature();
+ // editor is shown only if all attribute references are filled by preseletion
+ bool anAllRefAttrInitialized = true;
+
+ std::list<AttributePtr> aRefAttrs = aFeature->data()->attributes(
+ ModelAPI_AttributeRefAttr::typeId());
+ std::list<AttributePtr>::const_iterator anIt = aRefAttrs.begin(), aLast = aRefAttrs.end();
+ for (; anIt != aLast && anAllRefAttrInitialized; anIt++) {
+ anAllRefAttrInitialized = (*anIt)->isInitialized();
+ }
+ if (anAllRefAttrInitialized) {
+ // Activate dimension value editing on double click
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ // Find corresponded widget to activate value editing
+ foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
+ if (aWgt->attributeID() == "ConstraintValue") {
+ // the featue should be displayed in order to find the AIS text position,
+ // the place where the editor will be shown
+ aFeature->setDisplayed(true);
+ /// the execute is necessary to perform in the feature compute for flyout position
+ aFeature->execute();
+
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_CREATED));
+ Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
+
+ PartSet_WidgetEditor* anEditor = dynamic_cast<PartSet_WidgetEditor*>(aWgt);
+ if (anEditor) {
+ int aX = 0, anY = 0;
+
+ ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ AISObjectPtr anAIS = aDisplayer->getAISObject(aFeature);
+ Handle(AIS_InteractiveObject) anAISIO;
+ if (anAIS.get() != NULL) {
+ anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
+ }
+ if (anAIS.get() != NULL) {
+ Handle(AIS_InteractiveObject) anAISIO = anAIS->impl<Handle(AIS_InteractiveObject)>();
+
+ if (!anAISIO.IsNull()) {
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAISIO);
+ if (!aDim.IsNull()) {
+ gp_Pnt aPosition = aDim->GetTextPosition();
+
+ ModuleBase_IViewer* aViewer = aWorkshop->viewer();
+ Handle(V3d_View) aView = aViewer->activeView();
+ int aCX, aCY;
+ aView->Convert(aPosition.X(), aPosition.Y(), aPosition.Z(), aCX, aCY);
+
+ QWidget* aViewPort = aViewer->activeViewPort();
+ QPoint aGlPoint = aViewPort->mapToGlobal(QPoint(aCX, aCY));
+ aX = aGlPoint.x();
+ anY = aGlPoint.y();
+ }
+ }
+ anEditor->setCursorPosition(aX, anY);
+ anEditor->showPopupEditor(false);
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+ anOperation->commit();
+ }
+}
+
bool PartSet_SketcherMgr::canUndo() const
{
return isNestedCreateOperation(getCurrentOperation());
return isNestedCreateOperation(getCurrentOperation());
}
-bool PartSet_SketcherMgr::canCommitOperation() const
+bool PartSet_SketcherMgr::canEraseObject(const ObjectPtr& theObject) const
{
- bool aCanCommit = true;
-
- if (isNestedCreateOperation(getCurrentOperation()) && myIsResetCurrentValue)
- aCanCommit = false;
-
- return aCanCommit;
+ bool aCanErase = true;
+ // when the sketch operation is active, results of sketch sub-feature can not be hidden
+ if (myCurrentSketch.get()) {
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
+ if (aResult.get()) {
+ // Display sketcher objects
+ for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {
+
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator anIt;
+ for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {
+ aCanErase = *anIt != aResult;
+ }
+ }
+ }
+ }
+ return aCanErase;
}
bool PartSet_SketcherMgr::canDisplayObject(const ObjectPtr& theObject) const
// 3. the method should not filter the objects, which are not related to the current operation.
// The object is filtered just if it is a current operation feature or this feature result
bool isObjectFound = false;
- ModuleBase_Operation* anOperation = getCurrentOperation();
- if (anOperation) {
- FeaturePtr aFeature = anOperation->feature();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ FeaturePtr aFeature = aFOperation->feature();
if (aFeature.get()) {
std::list<ResultPtr> aResults = aFeature->results();
if (theObject == aFeature)
isObjectFound = true;
else {
std::list<ResultPtr>::const_iterator anIt = aResults.begin(), aLast = aResults.end();
- for (; anIt != aLast; anIt++) {
+ for (; anIt != aLast && !isObjectFound; anIt++) {
isObjectFound = *anIt == theObject;
}
}
// c. widget editor control
#ifndef DEBUG_DO_NOT_BY_ENTER
if (aCanDisplay && isNestedCreateOperation(getCurrentOperation())) {
- ModuleBase_Operation* aOperation = getCurrentOperation();
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* anActiveWdg = aPanel ? aPanel->activeWidget() : 0;
- ModuleBase_WidgetEditor* anEditorWdg = anActiveWdg ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWdg) : 0;
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ ModuleBase_WidgetEditor* anEditorWdg = anActiveWidget ? dynamic_cast<ModuleBase_WidgetEditor*>(anActiveWidget) : 0;
// the active widget editor should not influence here. The presentation should be visible always
// when this widget is active.
if (!anEditorWdg && !myIsPopupMenuActive) {
return aCanDisplay;
}
+void PartSet_SketcherMgr::processHiddenObject(const std::list<ObjectPtr>& theObjects)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation && myCurrentSketch.get()) {
+ // find results of the current operation
+ // these results should not be proposed to be deleted
+ FeaturePtr anOperationFeature = aFOperation->feature();
+ std::list<ResultPtr> anOperationResultList = anOperationFeature->results();
+ std::set<ResultPtr> anOperationResults;
+ std::list<ResultPtr>::const_iterator aRIt = anOperationResultList.begin(),
+ aRLast = anOperationResultList.end();
+ for (; aRIt != aRLast; aRIt++)
+ anOperationResults.insert(*aRIt);
+
+ std::set<FeaturePtr> anObjectsToBeDeleted;
+ QStringList anObjectsToBeDeletedNames;
+ std::list<ObjectPtr>::const_iterator anIt = theObjects.begin(), aLast = theObjects.end();
+ for (; anIt != aLast; anIt++) {
+ ObjectPtr anObject = *anIt;
+ bool aCanErase = true;
+ // when the sketch operation is active, results of sketch sub-feature can not be hidden
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(anObject);
+ // the result is found between current feature results
+ if (anOperationResults.find(aResult) != anOperationResults.end())
+ continue;
+
+ if (aResult.get()) {
+ // Display sketcher objects
+ for (int i = 0; i < myCurrentSketch->numberOfSubs() && aCanErase; i++) {
+ FeaturePtr aFeature = myCurrentSketch->subFeature(i);
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator anIt;
+ for (anIt = aResults.begin(); anIt != aResults.end() && aCanErase; ++anIt) {
+ aCanErase = *anIt != aResult;
+ }
+ }
+ }
+ if (!aCanErase) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
+ if (aFeature.get() && anObjectsToBeDeleted.find(aFeature) == anObjectsToBeDeleted.end()) {
+ anObjectsToBeDeleted.insert(aFeature);
+ anObjectsToBeDeletedNames.append(aFeature->name().c_str());
+ }
+ }
+ }
+ if (!anObjectsToBeDeleted.empty()) {
+ QString aFeatureNames = anObjectsToBeDeletedNames.join(", ");
+ QString aMessage = tr("The following features have incorrect presentation and \
+will be hidden: %1. Would you like to delete them?")
+ .arg(aFeatureNames);
+ int anAnswer = QMessageBox::question(qApp->activeWindow(), tr("Features hide"),
+ aMessage, QMessageBox::Ok | QMessageBox::Cancel,
+ QMessageBox::Cancel);
+ if (anAnswer == QMessageBox::Ok) {
+ QObjectPtrList anObjects;
+ std::set<FeaturePtr>::const_iterator anIt = anObjectsToBeDeleted.begin(),
+ aLast = anObjectsToBeDeleted.end();
+ for (; anIt != aLast; anIt++)
+ anObjects.append(*anIt);
+ SessionPtr aMgr = ModelAPI_Session::get();
+ DocumentPtr aDoc = aMgr->activeDocument();
+ bool aIsOp = aMgr->isOperation();
+ if (!aIsOp)
+ aMgr->startOperation();
+ workshop()->deleteFeatures(anObjects);
+ //static Events_ID aDeletedEvent = Events_Loop::eventByName(EVENT_OBJECT_DELETED);
+ //static Events_ID aRedispEvent = Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY);
+ //Events_Loop::loop()->flush(aDeletedEvent);
+ //Events_Loop::loop()->flush(aRedispEvent);
+
+ if (!aIsOp)
+ aMgr->finishOperation();
+ }
+ }
+ }
+}
+
bool PartSet_SketcherMgr::canDisplayCurrentCreatedFeature() const
{
- return myIsMouseOverWindow || !myIsResetCurrentValue;
-#ifdef DEBUG_MOUSE_OVER_WINDOW_FLAGS
- qDebug(QString("canDisplayCurrentCreatedFeature: %1").arg(mouseOverWindowFlagsInfo()).toStdString().c_str());
-#endif
+ bool aCanDisplay = myIsMouseOverWindow;
+ if (!aCanDisplay) {
+ ModuleBase_ModelWidget* anActiveWidget = getActiveWidget();
+ if (anActiveWidget)
+ aCanDisplay = anActiveWidget->getValueState() == ModuleBase_ModelWidget::Stored;
+ }
+ return aCanDisplay;
+}
+
+bool PartSet_SketcherMgr::canChangeCursor(ModuleBase_Operation* theOperation) const
+{
+ return isNestedCreateOperation(theOperation) ||
+ myModule->sketchReentranceMgr()->isInternalEditActive();
+}
+
+const QMap<PartSet_Tools::ConstraintVisibleState, bool>& PartSet_SketcherMgr::showConstraintStates()
+{
+ return myIsConstraintsShown;
}
bool PartSet_SketcherMgr::isObjectOfSketch(const ObjectPtr& theObject) const
ModuleBase_IViewer* aViewer = theWorkshop->viewer();
Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ if (!aContext.IsNull()) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
- std::list<ResultPtr> aResults = theFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
- {
- ResultPtr aResult = *aIt;
- AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
- if (aAISObj.get() == NULL)
- continue;
- Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
- for (aContext->InitSelected(); aContext->MoreSelected(); aContext->NextSelected())
+ std::list<ResultPtr> aResults = theFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt)
{
- Handle(SelectMgr_EntityOwner) anOwner = aContext->SelectedOwner();
- if (anOwner->Selectable() != anAISIO)
+ ResultPtr aResult = *aIt;
+ AISObjectPtr aAISObj = aDisplayer->getAISObject(aResult);
+ if (aAISObj.get() == NULL)
continue;
- getAttributesOrResults(anOwner, theFeature, theSketch, aResult,
- aSelectedAttributes, aSelectedResults);
- }
- for (aContext->InitDetected(); aContext->MoreDetected(); aContext->NextDetected()) {
- Handle(SelectMgr_EntityOwner) anOwner = aContext->DetectedOwner();
- if (anOwner.IsNull())
- continue;
- if (anOwner->Selectable() != anAISIO)
- continue;
- getAttributesOrResults(anOwner, theFeature, theSketch, aResult,
- aSelectedAttributes, aSelectedResults);
+ Handle(AIS_InteractiveObject) anAISIO = aAISObj->impl<Handle(AIS_InteractiveObject)>();
+ for (aContext->InitSelected(); aContext->MoreSelected(); aContext->NextSelected())
+ {
+ Handle(SelectMgr_EntityOwner) anOwner = aContext->SelectedOwner();
+ if (anOwner->Selectable() != anAISIO)
+ continue;
+ getAttributesOrResults(anOwner, theFeature, theSketch, aResult,
+ aSelectedAttributes, aSelectedResults);
+ }
+ for (aContext->InitDetected(); aContext->MoreDetected(); aContext->NextDetected()) {
+ Handle(SelectMgr_EntityOwner) anOwner = aContext->DetectedOwner();
+ if (anOwner.IsNull())
+ continue;
+ if (anOwner->Selectable() != anAISIO)
+ continue;
+ getAttributesOrResults(anOwner, theFeature, theSketch, aResult,
+ aSelectedAttributes, aSelectedResults);
+ }
}
}
theSelection[theFeature] = std::make_pair(aSelectedAttributes, aSelectedResults);
const FeaturePtr& theSketch,
ModuleBase_IWorkshop* theWorkshop,
const FeatureToSelectionMap& theSelection,
- SelectMgr_IndexedMapOfOwner& anOwnersToSelect)
+ SelectMgr_IndexedMapOfOwner& theOwnersToSelect)
{
if (theFeature.get() == NULL)
return;
std::set<ResultPtr> aSelectedResults = anIt.value().second;
ModuleBase_IViewer* aViewer = theWorkshop->viewer();
- Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWorkshop);
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
for (Standard_Integer i = 1, n = aSelectedOwners.Extent(); i <= n; i++) {
Handle(SelectMgr_EntityOwner) anOwner = aSelectedOwners(i);
if (!anOwner.IsNull())
- anOwnersToSelect.Add(anOwner);
+ theOwnersToSelect.Add(anOwner);
}
}
AttributePtr aPntAttr = PartSet_Tools::findAttributeBy2dPoint(theFeature, aShape, theSketch);
if (aPntAttr.get() != NULL &&
aSelectedAttributes.find(aPntAttr) != aSelectedAttributes.end()) {
- anOwnersToSelect.Add(anOwner);
+ theOwnersToSelect.Add(anOwner);
}
}
else if (aShapeType == TopAbs_EDGE) {
bool aFound = aSelectedResults.find(aResult) != aSelectedResults.end();
if (aSelectedResults.find(aResult) != aSelectedResults.end() &&
- anOwnersToSelect.FindIndex(anOwner) <= 0)
- anOwnersToSelect.Add(anOwner);
+ theOwnersToSelect.FindIndex(anOwner) <= 0)
+ theOwnersToSelect.Add(anOwner);
}
}
}
}
-void PartSet_SketcherMgr::connectToPropertyPanel(const bool isToConnect)
+void PartSet_SketcherMgr::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
{
- ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
- XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
- if (aPropertyPanel) {
- const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
- foreach (ModuleBase_ModelWidget* aWidget, aWidgets) {
- if (isToConnect) {
- connect(aWidget, SIGNAL(beforeValuesChanged()),
+ if (isToConnect) {
+ connect(theWidget, SIGNAL(beforeValuesChanged()),
+ this, SLOT(onBeforeValuesChangedInPropertyPanel()));
+ connect(theWidget, SIGNAL(afterValuesChanged()),
+ this, SLOT(onAfterValuesChangedInPropertyPanel()));
+ }
+ else {
+ disconnect(theWidget, SIGNAL(beforeValuesChanged()),
this, SLOT(onBeforeValuesChangedInPropertyPanel()));
- connect(aWidget, SIGNAL(valuesChanged()), this, SLOT(onValuesChangedInPropertyPanel()));
- connect(aWidget, SIGNAL(afterValuesChanged()),
+ disconnect(theWidget, SIGNAL(afterValuesChanged()),
this, SLOT(onAfterValuesChangedInPropertyPanel()));
- }
- else {
- disconnect(aWidget, SIGNAL(beforeValuesChanged()),
- this, SLOT(onBeforeValuesChangedInPropertyPanel()));
- disconnect(aWidget, SIGNAL(valuesChanged()), this, SLOT(onValuesChangedInPropertyPanel()));
- disconnect(aWidget, SIGNAL(afterValuesChanged()),
- this, SLOT(onAfterValuesChangedInPropertyPanel()));
- }
+ }
+}
+
+void PartSet_SketcherMgr::widgetStateChanged(int thePreviousState)
+{
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (getCurrentOperation());
+ if (aFOperation) {
+ if (PartSet_SketcherMgr::isSketchOperation(aFOperation) ||
+ PartSet_SketcherMgr::isNestedSketchOperation(aFOperation) &&
+ thePreviousState == ModuleBase_ModelWidget::ModifiedInPP) {
+ FeaturePtr aFeature = aFOperation->feature();
+ visualizeFeature(aFeature, aFOperation->isEditOperation(), canDisplayObject(aFeature));
}
}
}
return myModule->workshop()->currentOperation();
}
-void PartSet_SketcherMgr::visualizeFeature(ModuleBase_Operation* theOperation,
+//**************************************************************
+ModuleBase_ModelWidget* PartSet_SketcherMgr::getActiveWidget() const
+{
+ ModuleBase_ModelWidget* aWidget = 0;
+ ModuleBase_Operation* anOperation = getCurrentOperation();
+ if (anOperation) {
+ ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
+ if (aPanel)
+ aWidget = aPanel->activeWidget();
+ }
+ return aWidget;
+}
+
+void PartSet_SketcherMgr::visualizeFeature(const FeaturePtr& theFeature,
+ const bool isEditOperation,
const bool isToDisplay,
const bool isFlushRedisplay)
{
return;
#endif
- if (!theOperation || theOperation->isEditOperation())
+ if (isEditOperation || !theFeature.get())
return;
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
// 1. change visibility of the object itself, here the presentable object is processed,
// e.g. constraints features
- FeaturePtr aFeature = theOperation->feature();
- std::list<ResultPtr> aResults = aFeature->results();
+ //FeaturePtr aFeature = aFOperation->feature();
+ std::list<ResultPtr> aResults = theFeature->results();
if (isToDisplay)
- aFeature->setDisplayed(true);
+ theFeature->setDisplayed(true);
else
- aFeature->setDisplayed(false);
+ theFeature->setDisplayed(false);
// change visibility of the object results, e.g. non-constraint features
std::list<ResultPtr>::const_iterator aIt;
}
}
-void PartSet_SketcherMgr::onShowConstraintsToggle(bool theOn)
+void PartSet_SketcherMgr::onShowConstraintsToggle(bool theState, int theType)
{
- if (myIsConstraintsShown == theOn)
+ PartSet_Tools::ConstraintVisibleState aType = (PartSet_Tools::ConstraintVisibleState)theType;
+ if (myIsConstraintsShown.contains(aType) && myIsConstraintsShown[aType] == theState)
return;
if (myCurrentSketch.get() == NULL)
return;
- myIsConstraintsShown = theOn;
+ myIsConstraintsShown[aType] = theState;
ModuleBase_IWorkshop* aWorkshop = myModule->workshop();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
const QStringList& aConstrIds = constraintsIdList();
for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
FeaturePtr aSubFeature = myCurrentSketch->subFeature(i);
- if (aConstrIds.contains(QString(aSubFeature->getKind().c_str()))) {
- if (myIsConstraintsShown)
- aSubFeature->setDisplayed(true);
+ std::string aKind = aSubFeature->getKind();
+ if (aConstrIds.contains(QString(aKind.c_str()))) {
+ bool isTypedConstraint = false;
+ if (aType == PartSet_Tools::Dimensional) {
+ isTypedConstraint = isDistanceKind(aKind);
+ }
else
- aSubFeature->setDisplayed(false);
+ isTypedConstraint = !isDistanceKind(aKind);
+
+ if (isTypedConstraint) {
+ if (theState)
+ aSubFeature->setDisplayed(true);
+ else
+ aSubFeature->setDisplayed(false);
+ }
}
}
Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_TO_REDISPLAY));
}
-QString PartSet_SketcherMgr::mouseOverWindowFlagsInfo() const
+XGUI_Workshop* PartSet_SketcherMgr::workshop() const
{
- return QString("myIsResetCurrentValue = %1, myIsMouseOverWindow = %2")
- .arg(myIsResetCurrentValue).arg(myIsMouseOverWindow);
+ ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
+ return aConnector->workshop();
}
XGUI_OperationMgr* PartSet_SketcherMgr::operationMgr() const
{
- ModuleBase_IWorkshop* anIWorkshop = myModule->workshop();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(anIWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
-
- return aWorkshop->operationMgr();
+ return workshop()->operationMgr();
}
+