-// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
-
-// File: PartSet_ResultSketchPrs.h
-// Created: 25 March 2015
-// Author: Natalia ERMOLAEVA
+// Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
#include "PartSet_ResultSketchPrs.h"
#include "PartSet_Tools.h"
#include <ModelAPI_Events.h>
#include <ModelAPI_Tools.h>
#include <ModelAPI_ResultConstruction.h>
+#include <ModelAPI_ResultBody.h>
#include <GeomAPI_PlanarEdges.h>
-#include <Events_Error.h>
+#include <Events_InfoMessage.h>
#include <Events_Loop.h>
#include <SketchPlugin_SketchEntity.h>
+#include <SketcherPrs_Tools.h>
+
#include <Config_PropManager.h>
#include <BRep_Builder.hxx>
#include <Prs3d_PointAspect.hxx>
#include <TopoDS_Builder.hxx>
#include <SelectMgr_SelectionManager.hxx>
-#include <StdPrs_WFDeflectionShape.hxx>
+#include <StdPrs_WFShape.hxx>
#include <StdSelect_BRepSelectionTool.hxx>
#include <Graphic3d_AspectLine3d.hxx>
#include <Prs3d_LineAspect.hxx>
+#include <Graphic3d_AspectMarker3d.hxx>
#define DEBUG_WIRE
//*******************************************************************************************
-IMPLEMENT_STANDARD_HANDLE(PartSet_ResultSketchPrs, ViewerData_AISShape);
IMPLEMENT_STANDARD_RTTIEXT(PartSet_ResultSketchPrs, ViewerData_AISShape);
PartSet_ResultSketchPrs::PartSet_ResultSketchPrs(ResultPtr theResult)
TopoDS_Shape aShape = aShapePtr->impl<TopoDS_Shape>();
Set(aShape);
Handle(Prs3d_Drawer) aDrawer = Attributes();
- if (aDrawer->HasOwnPointAspect())
+ if (aDrawer->HasOwnPointAspect())
aDrawer->PointAspect()->SetTypeOfMarker(Aspect_TOM_PLUS);
else
aDrawer->SetPointAspect(new Prs3d_PointAspect(Aspect_TOM_PLUS, Quantity_NOC_YELLOW, 1.));
// Activate individual repaintng if this is a part of compsolid
- ResultCompSolidPtr aCompSolid = ModelAPI_Tools::compSolidOwner(myResult);
- SetAutoHilight(aCompSolid.get() == NULL);
-}
+ ResultBodyPtr anOwner = ModelAPI_Tools::bodyOwner(myResult);
+ SetAutoHilight(anOwner.get() == NULL);
-bool PartSet_ResultSketchPrs::isValidShapeType(const TopAbs_ShapeEnum& theBaseType,
- const TopAbs_ShapeEnum& theCheckedType)
-{
- bool aValid = theBaseType == theCheckedType;
- if (!aValid) {
- // currently this functionality is for all, as we have no separate wire selection mode
- // lately it should be corrected to have the following check only for sketch presentations
- aValid = theBaseType == TopAbs_FACE && theCheckedType == TopAbs_WIRE;
- }
- return aValid;
+ ModuleBase_Tools::setPointBallHighlighting(this);
}
-void PartSet_ResultSketchPrs::Compute(const Handle(PrsMgr_PresentationManager3d)& thePresentationManager,
- const Handle(Prs3d_Presentation)& thePresentation,
- const Standard_Integer theMode)
+void PartSet_ResultSketchPrs::Compute(
+ const Handle(PrsMgr_PresentationManager3d)& thePresentationManager,
+ const Handle(Prs3d_Presentation)& thePresentation,
+ const Standard_Integer theMode)
{
thePresentation->Clear();
setAuxiliaryPresentationStyle(false);
// change deviation coefficient to provide more precise circle
- ModuleBase_Tools::setDefaultDeviationCoefficient(Shape(), Attributes());
- AIS_Shape::Compute(thePresentationManager, thePresentation, theMode);
-
+ //ModuleBase_Tools::setDefaultDeviationCoefficient(myResult, Attributes());
+ try {
+ AIS_Shape::Compute(thePresentationManager, thePresentation, theMode);
+ }
+ catch (...) {
+ return;
+ }
if (!myAuxiliaryCompound.IsNull()) {
setAuxiliaryPresentationStyle(true);
Handle(Prs3d_Drawer) aDrawer = Attributes();
- StdPrs_WFDeflectionShape::Add(thePresentation, myAuxiliaryCompound, aDrawer);
+ StdPrs_WFShape::Add(thePresentation, myAuxiliaryCompound, aDrawer);
}
if (!aReadyToDisplay) {
- Events_Error::throwException("An empty AIS presentation: PartSet_ResultSketchPrs");
+ Events_InfoMessage("PartSet_ResultSketchPrs",
+ "An empty AIS presentation: PartSet_ResultSketchPrs").send();
static const Events_ID anEvent = Events_Loop::eventByName(EVENT_EMPTY_AIS_PRESENTATION);
ModelAPI_EventCreator::get()->sendUpdated(myResult, anEvent);
}
TopTools_IndexedMapOfShape aSubShapes;
TopExp::MapShapes (theShape, theType, aSubShapes);
- Standard_Boolean isComesFromDecomposition = !((aSubShapes.Extent() == 1) && (theShape == aSubShapes (1)));
+ Standard_Boolean
+ isComesFromDecomposition = !((aSubShapes.Extent() == 1) && (theShape == aSubShapes (1)));
int anExtent = aSubShapes.Extent();
for (Standard_Integer aShIndex = 1; aShIndex <= aSubShapes.Extent(); ++aShIndex)
{
#endif
void PartSet_ResultSketchPrs::ComputeSelection(const Handle(SelectMgr_Selection)& aSelection,
- const Standard_Integer aMode)
+ const Standard_Integer theMode)
{
- if (aMode > 8)
+ int aMode = theMode;
+
+ if (aMode > 8 &&
+ aMode != SketcherPrs_Tools::Sel_Sketch_Face &&
+ aMode != SketcherPrs_Tools::Sel_Sketch_Wire)
// In order to avoid using custom selection modes
return;
- if (aMode == AIS_Shape::SelectionMode(TopAbs_FACE)) {
+ bool aShapeIsChanged = false;
+ double aPrevDeviation = Attributes()->DeviationCoefficient();
+ if (aMode == SketcherPrs_Tools::Sel_Sketch_Face ||
+ aMode == SketcherPrs_Tools::Sel_Sketch_Wire) {
+ aMode = (aMode == SketcherPrs_Tools::Sel_Sketch_Face) ? AIS_Shape::SelectionMode(TopAbs_FACE)
+ : AIS_Shape::SelectionMode(TopAbs_WIRE);
#ifdef DEBUG_WIRE
const TopoDS_Shape& aShape = Shape();
debugInfo(aShape, TopAbs_VERTEX); // 24
TopoDS_Compound aComp;
aBuilder.MakeCompound(aComp);
aBuilder.Add(aComp, myOriginalShape);
-
+
for(NCollection_List<TopoDS_Shape>::Iterator anIt(mySketchFaceList); anIt.More(); anIt.Next()) {
const TopoDS_Shape& aFace = anIt.Value();
aBuilder.Add(aComp, aFace);
- // for sketch presentation in the face mode wires should be selectable also
- // accoring to #1343 Improvement of Extrusion and Revolution operations
- appendShapeSelection(aSelection, aFace, TopAbs_WIRE);
}
#ifdef DEBUG_WIRE
debugInfo(aComp, TopAbs_VERTEX); // 24
debugInfo(aComp, TopAbs_FACE); // 2
#endif
Set(aComp);
- } else
+ double aBodyDefDeflection = Config_PropManager::real("Visualization", "body_deflection");
+ Attributes()->SetDeviationCoefficient(aBodyDefDeflection);
+ aShapeIsChanged = true;
+ }
+ else
Set(myOriginalShape);
// append auxiliary compound to selection of edges/vertices
if (aMode == AIS_Shape::SelectionMode(TopAbs_EDGE) ||
aMode == AIS_Shape::SelectionMode(TopAbs_VERTEX)) {
- bool isVertex = aMode == AIS_Shape::SelectionMode(TopAbs_VERTEX);
+ bool isVertex = aMode == AIS_Shape::SelectionMode(TopAbs_VERTEX);
appendShapeSelection(aSelection, myAuxiliaryCompound, isVertex ? TopAbs_VERTEX : TopAbs_EDGE);
}
AIS_Shape::ComputeSelection(aSelection, aMode);
+
+ if (aShapeIsChanged) {
+ Attributes()->SetDeviationCoefficient(aPrevDeviation);
+ Set(myOriginalShape);
+ }
}
void PartSet_ResultSketchPrs::appendShapeSelection(const Handle(SelectMgr_Selection)& theSelection,
void PartSet_ResultSketchPrs::setAuxiliaryPresentationStyle(const bool isAuxiliary)
{
- std::vector<int> aColor;
- Standard_Real aWidth;
- Standard_Integer aLineStyle;
-
- if (!isAuxiliary) {
- aColor = Config_PropManager::color("Visualization", "result_construction_color",
- ModelAPI_ResultConstruction::DEFAULT_COLOR());
- aWidth = PartSet_Tools::getAISDefaultWidth();// default width value
- aLineStyle = SketchPlugin_SketchEntity::SKETCH_LINE_STYLE();
- }
- else {
- aColor = Config_PropManager::color("Visualization", "sketch_auxiliary_color",
- SKETCH_AUXILIARY_COLOR);
- aWidth = SketchPlugin_SketchEntity::SKETCH_LINE_WIDTH_AUXILIARY();
- aLineStyle = SketchPlugin_SketchEntity::SKETCH_LINE_STYLE_AUXILIARY();
- }
+ Standard_Integer aLineStyle = isAuxiliary?
+ SketchPlugin_SketchEntity::SKETCH_LINE_STYLE_AUXILIARY() :
+ SketchPlugin_SketchEntity::SKETCH_LINE_STYLE();
Handle(Prs3d_Drawer) aDrawer = Attributes();
- setColor(aDrawer, Quantity_Color(aColor[0] / 255., aColor[1] / 255., aColor[2] / 255.,
- Quantity_TOC_RGB));
- setWidth(aDrawer, aWidth);
// set line style
Handle(Prs3d_LineAspect) aLineAspect;
if (aDrawer->HasOwnWireAspect()) {
aLineAspect = aDrawer->WireAspect();
}
- Quantity_Color aCurrentColor;
- Aspect_TypeOfLine aPrevLineType;
- Standard_Real aCurrentWidth;
- aLineAspect->Aspect()->Values(aCurrentColor, aPrevLineType, aCurrentWidth);
+ Quantity_Color aCurrentColor = aLineAspect->Aspect()->Color();
+ Aspect_TypeOfLine aPrevLineType = aLineAspect->Aspect()->Type();
+ Standard_Real aCurrentWidth = aLineAspect->Aspect()->Width();
bool isChangedLineType = aType != aPrevLineType;
if (isChangedLineType) {
- aLineAspect->SetTypeOfLine(aType);
+ Handle(Prs3d_LineAspect) aAspect = new Prs3d_LineAspect(aCurrentColor, aType, aCurrentWidth);
+ aDrawer->SetLineAspect(aAspect);
+ aDrawer->SetWireAspect(aAspect);
+ SetAttributes(aDrawer);
}
}
return;
theFaceList.Clear();
- ResultConstructionPtr aConstruction =
+ ResultConstructionPtr aConstruction =
std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(myResult);
if (aConstruction.get()) {
int aFacesNum = aConstruction->facesNum();
CompositeFeaturePtr aSketchFeature = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>
(aResultFeature);
std::list<ResultPtr> anAuxiliaryResults;
- for (int i = 0; i < aSketchFeature->numberOfSubs(); i++) {
+ int aNumberOfSubs = aSketchFeature->numberOfSubs();
+ for (int i = 0; i < aNumberOfSubs; i++) {
FeaturePtr aFeature = aSketchFeature->subFeature(i);
if (PartSet_Tools::isAuxiliarySketchEntity(aFeature)) {
std::list<ResultPtr> aResults = aFeature->results();
anAuxiliaryResults.push_back(aResult);
}
}
- else {
- /// append not-edges shapes, e.g. center of a circle, an arc, a point feature
+ else if (PartSet_Tools::isIncludeIntoSketchResult(aFeature)) {
+ // Append not-edges shapes, e.g. center of a circle, an arc, a point feature.
+ // Issue #2535: do not show elements produced by Projection or Intersection features,
+ // which should not be included into the sketch result.
const std::list<std::shared_ptr<ModelAPI_Result> >& aRes = aFeature->results();
std::list<std::shared_ptr<ModelAPI_Result> >::const_iterator aResIter = aRes.cbegin();
for (; aResIter != aRes.cend(); aResIter++) {