#include <PartSet_Module.h>
#include <PartSet_OperationSketch.h>
#include <PartSet_OperationFeatureCreate.h>
-#include <PartSet_OperationFeatureEditMulti.h>
#include <PartSet_OperationFeatureEdit.h>
#include <PartSet_Listener.h>
#include <PartSet_TestOCC.h>
#include <ModelAPI_Events.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Data.h>
+#include <ModelAPI_Session.h>
#include <GeomDataAPI_Point2D.h>
+#include <GeomDataAPI_Point.h>
+#include <GeomDataAPI_Dir.h>
#include <XGUI_MainWindow.h>
#include <XGUI_Displayer.h>
#include <XGUI_Tools.h>
#include <SketchPlugin_Line.h>
+#include <SketchPlugin_Sketch.h>
#include <Config_PointerMessage.h>
#include <Config_ModuleReader.h>
connect(aContextMenuMgr, SIGNAL(actionTriggered(const QString&, bool)), this,
SLOT(onContextMenuCommand(const QString&, bool)));
- connect(myWorkshop->viewer(), SIGNAL(mousePress(QMouseEvent*)), this,
- SLOT(onMousePressed(QMouseEvent*)));
- connect(myWorkshop->viewer(), SIGNAL(mouseRelease(QMouseEvent*)), this,
- SLOT(onMouseReleased(QMouseEvent*)));
- connect(myWorkshop->viewer(), SIGNAL(mouseMove(QMouseEvent*)), this,
- SLOT(onMouseMoved(QMouseEvent*)));
- connect(myWorkshop->viewer(), SIGNAL(keyRelease(QKeyEvent*)), this,
- SLOT(onKeyRelease(QKeyEvent*)));
- connect(myWorkshop->viewer(), SIGNAL(mouseDoubleClick(QMouseEvent*)), this,
- SLOT(onMouseDoubleClick(QMouseEvent*)));
-
- myDocumentShapeFilter = new XGUI_ShapeDocumentFilter(aXWshop->displayer());
}
PartSet_Module::~PartSet_Module()
PartSet_OperationSketch* aSketchOp = dynamic_cast<PartSet_OperationSketch*>(aPreviewOp);
if (aSketchOp) {
if (aSketchOp->isEditOperation()) {
- setSketchingMode();
+ setSketchingMode(getSketchPlane(aSketchOp->feature()));
} else {
aDisplayer->openLocalContext();
aDisplayer->activateObjectsOutOfContext(QIntList());
aDisplayer->setSelectionModes(aModes);
}
}
- } else {
- //TODO (VSV): We have to open Local context because at neutral point filters don't work (bug 25340)
- aDisplayer->addSelectionFilter(myDocumentShapeFilter);
}
}
aDisplayer->activate(*anIt, aModes);
}
aDisplayer->activate(aFeature, aModes);
+ aDisplayer->clearSelected();
}
}
- } else {
+ }// else {
// Activate results of current feature for selection
//FeaturePtr aFeature = theOperation->feature();
//XGUI_Displayer* aDisplayer = aXWshp->displayer();
//std::list<ResultPtr>::const_iterator aIt;
//for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
// aDisplayer->activate(*aIt);
- //}
-
- // The document limitation selection has to be only during operation
- aDisplayer->removeSelectionFilter(myDocumentShapeFilter);
- }
- // Clear selection done during operation
- aDisplayer->clearSelected();
+ //}
+ //}
}
void PartSet_Module::onContextMenuCommand(const QString& theId, bool isChecked)
XGUI_Workshop* aXWshp = xWorkshop();
PartSet_OperationSketchBase* aPreviewOp =
dynamic_cast<PartSet_OperationSketchBase*>(workshop()->currentOperation());
- Handle(V3d_View) aView = myWorkshop->viewer()->activeView();
- if (aPreviewOp && (!aView.IsNull())) {
+ if (aPreviewOp) {
ModuleBase_ISelection* aSelection = workshop()->selection();
- // Initialise operation with preliminary selection
- std::list<ModuleBase_ViewerPrs> aSelected = aSelection->getSelected();
- std::list<ModuleBase_ViewerPrs> aHighlighted = aSelection->getHighlighted();
-
- aPreviewOp->mousePressed(theEvent, aView, aSelected, aHighlighted);
+ aPreviewOp->mousePressed(theEvent, myWorkshop->viewer(), aSelection);
}
}
{
PartSet_OperationSketchBase* aPreviewOp =
dynamic_cast<PartSet_OperationSketchBase*>(myWorkshop->currentOperation());
- Handle(V3d_View) aView = myWorkshop->viewer()->activeView();
- if (aPreviewOp && (!aView.IsNull())) {
+ if (aPreviewOp) {
ModuleBase_ISelection* aSelection = workshop()->selection();
// Initialise operation with preliminary selection
- std::list<ModuleBase_ViewerPrs> aSelected = aSelection->getSelected();
- std::list<ModuleBase_ViewerPrs> aHighlighted = aSelection->getHighlighted();
-
- aPreviewOp->mouseReleased(theEvent, aView, aSelected, aHighlighted);
+ aPreviewOp->mouseReleased(theEvent, myWorkshop->viewer(), aSelection);
}
}
{
PartSet_OperationSketchBase* aPreviewOp =
dynamic_cast<PartSet_OperationSketchBase*>(myWorkshop->currentOperation());
- Handle(V3d_View) aView = myWorkshop->viewer()->activeView();
- if (aPreviewOp && (!aView.IsNull()))
- aPreviewOp->mouseMoved(theEvent, aView);
+ if (aPreviewOp)
+ aPreviewOp->mouseMoved(theEvent, myWorkshop->viewer());
}
void PartSet_Module::onKeyRelease(QKeyEvent* theEvent)
if (aPreviewOp && (!aView.IsNull())) {
ModuleBase_ISelection* aSelection = workshop()->selection();
// Initialise operation with preliminary selection
- std::list<ModuleBase_ViewerPrs> aSelected = aSelection->getSelected();
- std::list<ModuleBase_ViewerPrs> aHighlighted = aSelection->getHighlighted();
- aPreviewOp->mouseDoubleClick(theEvent, aView, aSelected, aHighlighted);
+ aPreviewOp->mouseDoubleClick(theEvent, aView, aSelection);
}
}
void PartSet_Module::onPlaneSelected(double theX, double theY, double theZ)
{
myWorkshop->viewer()->setViewProjection(theX, theY, theZ);
+}
+
+void PartSet_Module::onSketchLaunched()
+{
xWorkshop()->actionsMgr()->update();
- setSketchingMode();
+ // Set working plane
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ FeaturePtr aSketch = anOperation->feature();
+ setSketchingMode(getSketchPlane(aSketch));
}
void PartSet_Module::onFitAllView()
}
ModuleBase_ISelection* aSelection = workshop()->selection();
// Initialise operation with preliminary selection
- std::list<ModuleBase_ViewerPrs> aSelected = aSelection->getSelected();
- std::list<ModuleBase_ViewerPrs> aHighlighted = aSelection->getHighlighted();
- aSketchOp->initSelection(aSelected, aHighlighted);
- } //else if (aFeature) {
- //anOperation->setFeature(aFeature);
+ aSketchOp->initSelection(aSelection, myWorkshop->viewer());
+ } else if (aFeature) { // In case of edit operation: set the previously created feature to the operation
+ anOperation->setFeature(aFeature);
////Deactivate result of current feature in order to avoid its selection
- //XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
- //std::list<ResultPtr> aResults = aFeature->results();
- //std::list<ResultPtr>::const_iterator aIt;
- //for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
- // aDisplayer->deactivate(*aIt);
- //}
- //}
+ XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
+ aDisplayer->deactivate(*aIt);
+ }
+ }
sendOperation(anOperation);
xWorkshop()->actionsMgr()->updateCheckState();
}
aDisplayer->updateViewer();
}
-void PartSet_Module::setSketchingMode()
+void PartSet_Module::setSketchingMode(const gp_Pln& thePln)
{
XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
if (!myPlaneFilter.IsNull()) {
myPlaneFilter.Nullify();
}
QIntList aModes;
- //aModes << TopAbs_VERTEX << TopAbs_EDGE;
- //aModes << AIS_DSM_Text << AIS_DSM_Line;
+ // Clear standard selection modes
aDisplayer->setSelectionModes(aModes);
aDisplayer->openLocalContext();
+
+ // Set filter
+ mySketchFilter = new ModuleBase_ShapeInPlaneFilter(thePln);
+ aDisplayer->addSelectionFilter(mySketchFilter);
+
// Get default selection modes
aModes = sketchSelectionModes(ObjectPtr());
aDisplayer->activateObjectsOutOfContext(aModes);
anOperation = new PartSet_OperationSketch(theCmdId.c_str(), this);
} else {
ModuleBase_Operation* aCurOperation = myWorkshop->currentOperation();
- FeaturePtr aSketch;
+ CompositeFeaturePtr aSketch;
PartSet_OperationSketchBase* aPrevOp = dynamic_cast<PartSet_OperationSketchBase*>(aCurOperation);
if (aPrevOp) {
aSketch = aPrevOp->sketch();
}
if (PartSet_OperationFeatureCreate::canProcessKind(theCmdId)) {
anOperation = new PartSet_OperationFeatureCreate(theCmdId.c_str(), this, aSketch);
- } else if (theCmdId == PartSet_OperationFeatureEditMulti::Type()) {
- anOperation = new PartSet_OperationFeatureEditMulti(theCmdId.c_str(), this, aSketch);
} else if (theCmdId == PartSet_OperationFeatureEdit::Type()) {
anOperation = new PartSet_OperationFeatureEdit(theCmdId.c_str(), this, aSketch);
}
SLOT(onFeatureConstructed(ObjectPtr, int)));
connect(aPreviewOp, SIGNAL(restartRequired(std::string, ObjectPtr)), this,
SLOT(onRestartOperation(std::string, ObjectPtr)));
- connect(aPreviewOp, SIGNAL(multiSelectionEnabled(bool)), this,
- SLOT(onMultiSelectionEnabled(bool)));
+ // If manage multi selection the it will be impossible to select more then one
+ // object under operation Edit
+// connect(aPreviewOp, SIGNAL(multiSelectionEnabled(bool)), this,
+// SLOT(onMultiSelectionEnabled(bool)));
connect(aPreviewOp, SIGNAL(stopSelection(const QList<ObjectPtr>&, const bool)), this,
SLOT(onStopSelection(const QList<ObjectPtr>&, const bool)));
connect(aSketchOp, SIGNAL(planeSelected(double, double, double)), this,
SLOT(onPlaneSelected(double, double, double)));
connect(aSketchOp, SIGNAL(fitAllView()), this, SLOT(onFitAllView()));
+ connect(aSketchOp, SIGNAL(launchSketch()), this, SLOT(onSketchLaunched()));
}
}
aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_EDGE));
return aModes;
}
+
+
+gp_Pln PartSet_Module::getSketchPlane(FeaturePtr theSketch) const
+{
+ DataPtr aData = theSketch->data();
+ boost::shared_ptr<GeomDataAPI_Point> anOrigin = boost::dynamic_pointer_cast<GeomDataAPI_Point>(
+ aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ boost::shared_ptr<GeomDataAPI_Dir> aNorm = boost::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ gp_Pnt aOrig(anOrigin->x(), anOrigin->y(), anOrigin->z());
+ gp_Dir aDir(aNorm->x(), aNorm->y(), aNorm->z());
+ return gp_Pln(aOrig, aDir);
+}
+
+
+void PartSet_Module::onSelectionChanged()
+{
+ ModuleBase_ISelection* aSelect = myWorkshop->selection();
+ QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
+ // We need to stop edit operation if selection is cleared
+ if (aSelected.size() == 0) {
+ // do not perform commit of the current edit operation here, because
+ // this functionality is realized inside this operation
+ /*PartSet_OperationFeatureEdit* anEditOp =
+ dynamic_cast<PartSet_OperationFeatureEdit*>(myWorkshop->currentOperation());
+ if (!anEditOp)
+ return;
+ anEditOp->commit();*/
+ } else {
+ PartSet_OperationSketchBase* aSketchOp =
+ dynamic_cast<PartSet_OperationSketchBase*>(myWorkshop->currentOperation());
+ if (aSketchOp) {
+ aSketchOp->selectionChanged(aSelect);
+ }
+ }
+}
