#include "PartSet_WidgetMultiSelector.h"
#include "PartSet_WidgetEditor.h"
#include "PartSet_WidgetFileSelector.h"
+#include "PartSet_WidgetSketchCreator.h"
#include "PartSet_SketcherMgr.h"
#include "PartSet_MenuMgr.h"
+#include "PartSet_Filters.h"
+#include "PartSet_FilterInfinite.h"
+
#include <PartSetPlugin_Remove.h>
#include <PartSetPlugin_Part.h>
#include <GeomValidators_Face.h>
#include <GeomValidators_ConstructionComposite.h>
+#include <GeomValidators_ZeroOffset.h>
+#include <GeomValidators_BooleanArguments.h>
#include <ModelAPI_Object.h>
#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Tools.h>
#include <XGUI_ObjectsBrowser.h>
+#include <XGUI_SelectionMgr.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomDataAPI_Dir.h>
+#include <SelectMgr_ListIteratorOfListOfFilter.hxx>
+
#ifdef _DEBUG
#include <QDebug>
#endif
Events_Loop* aLoop = Events_Loop::loop();
aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
+
+ mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
+ mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
}
PartSet_Module::~PartSet_Module()
{
- if (!myDocumentShapeFilter.IsNull())
- myDocumentShapeFilter.Nullify();
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ aFilter.Nullify();
+ }
+}
+
+void PartSet_Module::activateSelectionFilters()
+{
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ myWorkshop->viewer()->addSelectionFilter(aFilter);
+ }
+}
+
+void PartSet_Module::deactivateSelectionFilters()
+{
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ myWorkshop->viewer()->removeSelectionFilter(aFilter);
+ }
}
void PartSet_Module::registerValidators()
aFactory->registerValidator("GeomValidators_ConstructionComposite",
new GeomValidators_ConstructionComposite);
+ aFactory->registerValidator("GeomValidators_ZeroOffset",
+ new GeomValidators_ZeroOffset);
+
+ aFactory->registerValidator("GeomValidators_BooleanArguments",
+ new GeomValidators_BooleanArguments);
+
aFactory->registerValidator("PartSet_SketchEntityValidator",
new PartSet_SketchEntityValidator);
Config_Prop::Integer, SKETCH_WIDTH);
}
-void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
{
if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->commitNestedSketch(theOperation);
// the selection is cleared after commit the create operation
// in order to do not use the same selected objects in the restarted operation
// for common behaviour, the selection is cleared even if the operation is not restarted
- Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
- if (!aContext.IsNull())
- aContext->ClearSelected();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ aWorkshop->selector()->clearSelection();
/// Restart sketcher operations automatically
FeaturePtr aFeature = theOperation->feature();
myRestartingMode = RM_None;
}
-void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
{
breakOperationSequence();
}
-void PartSet_Module::sendOperation(ModuleBase_Operation* theOperation)
-{
- // Install the document filter before any other filter
- if (myDocumentShapeFilter.IsNull())
- myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
- myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
-
- ModuleBase_IModule::sendOperation(theOperation);
-}
-
-void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
{
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
}
}
-void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
{
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->stopSketch(theOperation);
else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->stopNestedSketch(theOperation);
}
- myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
}
ModuleBase_Operation* PartSet_Module::currentOperation() const
return aCanRedo;
}
+bool PartSet_Module::canCommitOperation() const
+{
+ return mySketchMgr->canCommitOperation();
+}
+
bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
{
// the sketch manager put the restriction to the objects display
return mySketchMgr->canDisplayObject(theObject);
}
+bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
+{
+ bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
+
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
+ isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (isSketchOp || isNestedOp) {
+ // in active sketch operation it is possible to activate operation object in selection
+ // in the edit operation, e.g. points of the line can be moved when the line is edited
+ aCanActivate = aCanActivate || anOperation->isEditOperation();
+ }
+ return aCanActivate;
+}
bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
{
}
}
}
- } else {
- // Start editing constraint
- if (theOperation->isEditOperation()) {
- // TODO: #391 - to be removed
- std::string aId = theOperation->id().toStdString();
- if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation) &&
- PartSet_SketcherMgr::isDistanceOperation(theOperation)) {
- // Find and activate widget for management of point for dimension line position
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aPntWgt) {
- aPanel->activateWidget(aPntWgt);
- return;
- }
- }
- }
- }
}
}
ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
Config_WidgetAPI* theWidgetApi, std::string theParentId)
{
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_IWorkshop* aWorkshop = workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
- aLabelWgt->setWorkshop(aWorkshop);
+ aLabelWgt->setWorkshop(aXUIWorkshop);
connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
- PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
- aPointWgt->setWorkshop(aWorkshop);
+ PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
+ theWidgetApi, theParentId);
aPointWgt->setSketch(mySketchMgr->activeSketch());
connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
aWgt = aPointWgt;
} else if (theType == "point2ddistance") {
- PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
- aDistanceWgt->setWorkshop(aWorkshop);
+ PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
+ aWorkshop, theWidgetApi, theParentId);
aDistanceWgt->setSketch(mySketchMgr->activeSketch());
aWgt = aDistanceWgt;
} else if(theType == "point2dangle") {
- PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent, theWidgetApi, theParentId);
- anAngleWgt->setWorkshop(aWorkshop);
+ PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
+ aWorkshop, theWidgetApi, theParentId);
anAngleWgt->setSketch(mySketchMgr->activeSketch());
aWgt = anAngleWgt;
} else if (theType == "sketch_shape_selector") {
PartSet_WidgetShapeSelector* aShapeSelectorWgt =
- new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
+ new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aShapeSelectorWgt;
} else if (theType == "sketch_multi_selector") {
PartSet_WidgetMultiSelector* aShapeSelectorWgt =
- new PartSet_WidgetMultiSelector(theParent, workshop(), theWidgetApi, theParentId);
+ new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aShapeSelectorWgt;
} else if (theType == WDG_DOUBLEVALUE_EDITOR) {
- aWgt = new PartSet_WidgetEditor(theParent, workshop(), theWidgetApi, theParentId);
+ aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
} else if (theType == "export_file_selector") {
- aWgt = new PartSet_WidgetFileSelector(theParent, workshop(), theWidgetApi, theParentId);
- }
+ aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ } else if (theType == "sketch_launcher") {
+ aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
+ }
return aWgt;
}
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
- if (isSketchOp && isNestedOp) {
+ if (isSketchOp || isNestedOp) {
// 2. find selected presentations
// selected objects should be collected before the current operation abort because
// the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
for ( ; anIt != aLast; anIt++) {
ObjectPtr anObject = *anIt;
- if (mySketchMgr->isObjectOfSketch(anObject))
- aSketchObjects.append(anObject);
+ if (mySketchMgr->isObjectOfSketch(anObject)) {
+ // sketch feature should be used in this list because workshop deletes features only
+ // results are skipped
+ FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
+ aSketchObjects.append(aSketchFeature);
+ }
}
// if the selection contains only local selected presentations from other sketches,
// the Delete operation should not be done at all
aWorkshop->displayer()->updateViewer();
aMgr->finishOperation();
} else {
+ bool isPartRemoved = false;
// Delete part with help of PartSet plugin
// TODO: the deleted objects has to be processed by multiselection
QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
ObjectPtr aObj = aObjects.first();
FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
- std::shared_ptr<ModelAPI_Document> aDoc = aMgr->activeDocument();
- aMgr->startOperation(PartSetPlugin_Remove::ID());
- FeaturePtr aFeature = aDoc->addFeature(PartSetPlugin_Remove::ID());
- aFeature->execute();
- aMgr->finishOperation();
- } else
- return false;
- } else
- return false;
+ // Remove feature should be created in the document of the part results
+ ResultPtr aPartResult = aFeature->firstResult();
+ if (aPartResult.get()) {
+ std::shared_ptr<ModelAPI_ResultPart> aPart =
+ std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
+ DocumentPtr aPartDoc = aPart->partDoc();
+ if (aPartDoc.get()) {
+ aMgr->startOperation(PartSetPlugin_Remove::ID());
+ FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
+ aFeature->execute();
+ aMgr->finishOperation();
+ isPartRemoved = true;
+ }
+ }
+ }
+ }
+ return isPartRemoved;
}
return true;
}
+void PartSet_Module::onFeatureTriggered()
+{
+ SessionPtr aMgr = ModelAPI_Session::get();
+ // 1. check whether the delete should be processed in the module
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
+ if (isNestedOp) {
+ // in case if in the viewer nothing is displayed, the create operation should not be
+ // comitted even if all values of the feature are initialized
+ if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
+ QAction* aCmd = dynamic_cast<QAction*>(sender());
+ //Do nothing on uncheck
+ if (aCmd->isCheckable() && !aCmd->isChecked())
+ return;
+
+ // the action information should be saved before the operation is aborted
+ // because this abort leads to update command status, which unchecks this action
+ anOperation->abort();
+
+ launchOperation(aCmd->data().toString());
+ }
+ }
+ ModuleBase_IModule::onFeatureTriggered();
+}
void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
{
return;
double aLen = aView->Convert(20);
+ double aPrevLen = SketcherPrs_Tools::getArrowSize();
SketcherPrs_Tools::setArrowSize(aLen);
+ const double aPrevScale = aViewer->Scale(aViewer->activeView());
+ const double aCurScale = aViewer->activeView()->Camera()->Scale();
+ aViewer->SetScale(aViewer->activeView(), aCurScale);
+ SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
bool isModified = false;
QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
foreach (AISObjectPtr aAIS, aPrsList) {
QPalette aPalet = aLabel->palette();
aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
aLabel->setPalette(aPalet);
+ aOB->treeView()->setExpandsOnDoubleClick(false);
+ connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
+ SLOT(onTreeViewDoubleClick(const QModelIndex&)));
+ connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
+ SLOT(onTreeViewDoubleClick(const QModelIndex&)));
connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
}
aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
}
if (aPart.get()) // this may be null is Part feature is disabled
- aPartDoc;
+ aPartDoc = aPart->partDoc();
if (aMgr->activeDocument() == aPartDoc)
theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
else
if (aPart->partDoc() == aActiveDoc) {
QModelIndex aIndex = myDataModel->partIndex(aPart);
if (myDataModel->activatePart(aIndex)) {
- aTreeView->setExpanded(aOldIndex, false);
+ if (aOldIndex.isValid())
+ aTreeView->setExpanded(aOldIndex, false);
aTreeView->setExpanded(myDataModel->activePartTree(), true);
aPalet.setColor(QPalette::Text, Qt::black);
}
}
}
aLabel->setPalette(aPalet);
+ aWorkshop->updateCommandStatus();
+
+ // Update displayed objects in order to update active color
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ QObjectPtrList aObjects = aDisplayer->displayedObjects();
+ foreach(ObjectPtr aObj, aObjects)
+ aDisplayer->redisplay(aObj, false);
+ aDisplayer->updateViewer();
+ }
+}
+
+void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
+{
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (!theIndex.isValid()) {
+ aMgr->setActiveDocument(aMgr->moduleDocument());
+ return;
+ }
+ if (theIndex.column() != 0) // Use only first column
+ return;
+ ObjectPtr aObj = myDataModel->object(theIndex);
+ ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
+ if (!aPart.get()) { // Probably this is Feature
+ FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
+ if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
+ aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
+ }
+ }
+ if (aPart.get()) { // if this is a part
+ if (aPart->partDoc() == aMgr->activeDocument()) {
+ aMgr->setActiveDocument(aMgr->moduleDocument());
+ } else {
+ aPart->activate();
+ }
}
}