#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Validators.h"
#include "PartSet_Tools.h"
+#include "PartSet_PreviewPlanes.h"
#include "PartSet_WidgetPoint2d.h"
#include "PartSet_WidgetPoint2dDistance.h"
#include "PartSet_WidgetPoint2DFlyout.h"
#include "PartSet_WidgetShapeSelector.h"
#include "PartSet_WidgetMultiSelector.h"
+#include "PartSet_WidgetSubShapeSelector.h"
#include "PartSet_WidgetEditor.h"
#include "PartSet_WidgetFileSelector.h"
#include "PartSet_WidgetSketchCreator.h"
#include "PartSet_SketcherMgr.h"
#include "PartSet_SketcherReetntrantMgr.h"
+#include "PartSet_ResultSketchPrs.h"
#include "PartSet_MenuMgr.h"
#include "PartSet_CustomPrs.h"
#include "PartSet_IconFactory.h"
#include <ModuleBase_OperationFeature.h>
#include <ModuleBase_WidgetFactory.h>
#include <ModuleBase_OperationDescription.h>
+#include <ModuleBase_ViewerPrs.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Events.h>
#include <ModelAPI_Session.h>
#include <ModelAPI_ResultBody.h>
#include <ModelAPI_AttributeString.h>
+#include <ModelAPI_AttributeSelectionList.h>
+#include <ModelAPI_Tools.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_DataModel.h>
#include <XGUI_ErrorMgr.h>
#include <XGUI_CustomPrs.h>
+#include <XGUI_SelectionMgr.h>
+#include <XGUI_ActionsMgr.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
#include <SketchPlugin_ConstraintRadius.h>
#include <SketcherPrs_SymbolPrs.h>
+#include <SketcherPrs_Coincident.h>
#include <SketcherPrs_Tools.h>
#include <Events_Loop.h>
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
: ModuleBase_IModule(theWshop),
- myVisualLayerId(0)
+ myVisualLayerId(0),
+ myIsOperationIsLaunched(false)
{
new PartSet_IconFactory();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
- XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
- connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
- this, SLOT(onOperationActivatedByPreselection()));
-
ModuleBase_IViewer* aViewer = theWshop->viewer();
connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
- myHasConstraintShown[PartSet_Tools::Geometrical] = true;
- myHasConstraintShown[PartSet_Tools::Dimensional] = true;
+ setDefaultConstraintShown();
Config_PropManager::registerProp("Visualization", "operation_parameter_color",
"Reference shape wireframe color in operation", Config_Prop::Color,
Config_PropManager::registerProp("Visualization", "operation_highlight_color",
"Multi selector item color in operation", Config_Prop::Color,
PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
+
+ //Config_PropManager::registerProp(SKETCH_TAB_NAME, "disable_input_fields", "Disable input fields",
+ // Config_Prop::Boolean, "true");
}
PartSet_Module::~PartSet_Module()
}
}
+void PartSet_Module::storeSelection()
+{
+ sketchMgr()->storeSelection();
+}
+
+void PartSet_Module::restoreSelection()
+{
+ sketchMgr()->restoreSelection();
+}
+
void PartSet_Module::registerValidators()
{
//Registering of validators
aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
- aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
}
void PartSet_Module::registerFilters()
void PartSet_Module::registerProperties()
{
- Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
+ Config_PropManager::registerProp(SKETCH_TAB_NAME, "planes_size", "Size", Config_Prop::Double,
PLANE_SIZE);
- Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
+ Config_PropManager::registerProp(SKETCH_TAB_NAME, "planes_thickness", "Thickness",
Config_Prop::Integer, SKETCH_WIDTH);
- Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
+ Config_PropManager::registerProp(SKETCH_TAB_NAME, "rotate_to_plane", "Rotate to plane when selected",
Config_Prop::Boolean, "false");
}
void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
{
- if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ if (sketchMgr()->isNestedSketchOperation(theOperation)) {
mySketchMgr->commitNestedSketch(theOperation);
}
void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
- /// Restart sketcher operations automatically
- mySketchReentrantMgr->operationStarted(theOperation);
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aFOperation) {
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(workshop());
+ XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
+
+ ModuleBase_ModelWidget* aFilledWidget = 0;
+ bool aPostonedWidgetActivation = false;
+
+ FeaturePtr aFeature = aFOperation->feature();
+ /// Restart sketcher operations automatically
+ /// it is important to call method of sketch reentrant manager before filling of PP
+ /// because it fills some created feature attributes, these new values should be used
+ /// to fill the property panel
+ mySketchReentrantMgr->operationStarted(theOperation);
+
+ aWorkshop->fillPropertyPanel(aFOperation);
+ // filling the operation values by the current selection
+ // if the operation can be committed after the controls filling, the method perform should
+ // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
+ bool isOperationCommitted = false;
+ if (!aFOperation->isEditOperation()) {
+ std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(workshop(), aFeature);
+ // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
+ aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
+ if (currentOperation() != aFOperation)
+ isOperationCommitted = true;
+ else {
+ if (aGreedAttributeId.empty()) {
+ // a signal should be emitted before the next widget activation
+ // because, the activation of the next widget will give a focus to the widget. As a result
+ // the value of the widget is initialized. And commit may happens until the value is entered.
+ if (aFilledWidget) {
+ if (mySketchReentrantMgr->canBeCommittedByPreselection())
+ isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
+ // activate the next obligatory widget
+ if (!isOperationCommitted)
+ aPropertyPanel->activateNextWidget(aFilledWidget);
+ }
+ }
+ else { // there is a greed widget
+ const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
+ std::string aFirstAttributeId = aWidgets.front()->attributeID();
+ // activate next widget after greeded if it is the first widget in the panel
+ // else the first panel widget is already activated by operation start
+ if (aFirstAttributeId == aGreedAttributeId)
+ aPostonedWidgetActivation = true;
+ }
+ }
+ } if (!isOperationCommitted) {
+ workshop()->updateCommandStatus();
+ aWorkshop->connectToPropertyPanel(true);
+ updateSketcherOnStart(aFOperation);
+ updatePresentationsOnStart(aFOperation);
+
+ // the objects of the current operation should be deactivated
+ QObjectPtrList anObjects;
+ anObjects.append(aFeature);
+ std::list<ResultPtr> aResults;
+ ModelAPI_Tools::allResults(aFeature, aResults);
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ anObjects.append(*aIt);
+ }
+ QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
+ for (; anIt != aLast; anIt++)
+ aWorkshop->deactivateActiveObject(*anIt, false);
+ if (anObjects.size() > 0) {
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ aDisplayer->updateViewer();
+ }
+ }
+ if (aPostonedWidgetActivation) {
+ // if the widget is an empty in the chain of activated widgets, the current operation
+ // is restarted. It should be performed after functionality of the operation starting
+ aPropertyPanel->activateNextWidget(aFilledWidget);
+ }
+ }
+}
+void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
+{
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->startSketch(theOperation);
}
- else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ else if (sketchMgr()->isNestedSketchOperation(theOperation)) {
mySketchMgr->startNestedSketch(theOperation);
}
+}
+void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
+{
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
if (aFOperation) {
myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
bool isModified = isModifiedArgs || isModifiedResults;
- if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ if (sketchMgr()->isNestedSketchOperation(theOperation)) {
mySketchMgr->stopNestedSketch(theOperation);
}
+ else if (PartSet_SketcherMgr::isSketchOperation(theOperation))
+ setDefaultConstraintShown();
//VSV: Viewer is updated on feature update and redisplay
if (isModified) {
QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
aLast = myHasConstraintShown.end();
for (; anIt != aLast; anIt++) {
- myHasConstraintShown[anIt.key()];
- mySketchMgr->onShowConstraintsToggle(anIt.value(), myHasConstraintShown[anIt.key()]);
+ mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
}
}
if (theActionId == "MOVE_CMD") {
FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
if (aFeature) {
+ ResultPtr aResult = ModuleBase_Tools::firstResult(aFeature);
// part features can not be moved in the history.
- if (aFeature->getKind() == PartSetPlugin_Part::ID())
+ if (aResult.get() && aResult->groupName() == ModelAPI_ResultPart::group())
aValid = false;
}
}
return mySketchMgr->canDisplayObject(theObject);
}
-void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
+/*void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
{
mySketchMgr->processHiddenObject(theObjects);
-}
+}*/
bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
{
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
- isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
if (isSketchOp || isNestedOp) {
// in active sketch operation it is possible to activate operation object in selection
// in the edit operation, e.g. points of the line can be moved when the line is edited
return aCanActivate;
}
-bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
+bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
+ QWidget* theParent,
+ QMap<int, QAction*>& theMenuActions) const
{
- return myMenuMgr->addViewerMenu(theMenu, theStdActions);
+ return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
}
void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
myMenuMgr->updateViewerMenu(theStdActions);
}
+bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
+{
+ bool isEnabledFixed = false;
+ if (theActionId == XGUI_ActionsMgr::AcceptAll &&
+ mySketchReentrantMgr->isInternalEditStarted())
+ isEnabledFixed = true;
+ return isEnabledFixed;
+}
+
QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
{
QString anError = ModuleBase_IModule::getFeatureError(theFeature);
PartSet_SketcherMgr::sketchSelectionModes(theModes);
}
+void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
+{
+ if (theTypes.contains(TopAbs_FACE))
+ theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
+ if (theTypes.contains(TopAbs_WIRE))
+ theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
+}
+
bool PartSet_Module::isMouseOverWindow()
{
return mySketchMgr->isMouseOverWindow();
}
+bool PartSet_Module::isSketchNeutralPointActivated() const
+{
+ bool isNeutralPoint = true;
+ if (sketchReentranceMgr()->isInternalEditStarted())
+ isNeutralPoint = false;
+ if (myIsOperationIsLaunched)
+ isNeutralPoint = false;
+
+ return isNeutralPoint;
+}
+
void PartSet_Module::closeDocument()
{
clearViewer();
if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
ModuleBase_ISelection* aSelection = workshop()->selection();
// click on a point in sketch leads here with the point is highlighted, not yet selected
- QList<ModuleBase_ViewerPrs> aPreselection = aSelection->getHighlighted();
+ QList<ModuleBase_ViewerPrsPtr> aPreselection = aSelection->getHighlighted();
if (aPreselection.size() == 1) {
- ModuleBase_ViewerPrs aSelectedPrs = aPreselection[0];
- ObjectPtr anObject = aSelectedPrs.object();
+ ModuleBase_ViewerPrsPtr aSelectedPrs = aPreselection[0];
+ ObjectPtr anObject = aSelectedPrs->object();
FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
FeaturePtr anOpFeature = aFOperation->feature();
- TopoDS_Shape aShape = aSelectedPrs.shape();
+ GeomShapePtr aShape = aSelectedPrs->shape();
// click on the digit of dimension constrain comes here with an empty shape, so we need the check
- if (aFeature == anOpFeature && !aShape.IsNull()) {
- AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aShape,
+ if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
+ const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
+ AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
mySketchMgr->activeSketch());
if (anAttribute.get()) {
QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
if (isSketcherOp) {
// Editing of constraints can be done on selection
ModuleBase_ISelection* aSelect = myWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
+ QList<ModuleBase_ViewerPrsPtr> aSelected = aSelect->getSelected();
if (aSelected.size() == 1) {
- ModuleBase_ViewerPrs aPrs = aSelected.first();
- ObjectPtr aObject = aPrs.object();
+ ModuleBase_ViewerPrsPtr aPrs = aSelected.first();
+ ObjectPtr aObject = aPrs->object();
FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
if (aFeature) {
std::string aId = aFeature->getKind();
anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
}
-void PartSet_Module::onOperationActivatedByPreselection()
-{
- if (!mySketchReentrantMgr->canBeCommittedByPreselection())
- return;
- mySketchMgr->operationActivatedByPreselection();
-}
-
-ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
- Config_WidgetAPI* theWidgetApi, std::string theParentId)
+ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
+ QWidget* theParent,
+ Config_WidgetAPI* theWidgetApi)
{
ModuleBase_IWorkshop* aWorkshop = workshop();
XGUI_Workshop* aXUIWorkshop = getWorkshop();
ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
- theWidgetApi, theParentId, mySketchMgr->showConstraintStates());
+ theWidgetApi, myHasConstraintShown);
connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
- connect(aLabelWgt, SIGNAL(showConstraintToggled(bool, int)),
- mySketchMgr, SLOT(onShowConstraintsToggle(bool, int)));
+ connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
+ mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
- theWidgetApi, theParentId);
+ theWidgetApi);
aPointWgt->setSketch(mySketchMgr->activeSketch());
connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
aWgt = aPointWgt;
}else if (theType == "sketch-2dpoint_flyout_selector") {
PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
- theWidgetApi, theParentId);
+ theWidgetApi);
aPointWgt->setSketch(mySketchMgr->activeSketch());
connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
aWgt = aPointWgt;
} else if (theType == "point2ddistance") {
PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
- aWorkshop, theWidgetApi, theParentId);
+ aWorkshop, theWidgetApi);
aDistanceWgt->setSketch(mySketchMgr->activeSketch());
aWgt = aDistanceWgt;
} else if (theType == "sketch_shape_selector") {
PartSet_WidgetShapeSelector* aShapeSelectorWgt =
- new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aShapeSelectorWgt;
} else if (theType == "sketch_multi_selector") {
PartSet_WidgetMultiSelector* aShapeSelectorWgt =
- new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aShapeSelectorWgt;
- } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
- aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
+ }
+ else if (theType == "sketch_sub_shape_selector") {
+ PartSet_WidgetSubShapeSelector* aSubShapeSelectorWgt =
+ new PartSet_WidgetSubShapeSelector(theParent, aWorkshop, theWidgetApi);
+ aSubShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
+ aWgt = aSubShapeSelectorWgt;
+ }
+ else if (theType == WDG_DOUBLEVALUE_EDITOR) {
+ aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
} else if (theType == "export_file_selector") {
- aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
} else if (theType == "sketch_launcher") {
- aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
+ aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
} else if (theType == "module_choice") {
- aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi, theParentId);
- connect(aWgt, SIGNAL(itemSelected(int)), SLOT(onBooleanOperationChange(int)));
+ aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
+ connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
+ this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
}
return aWgt;
}
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
if (aOperation) {
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- anActiveWidget = aPanel->activeWidget();
+ anActiveWidget = aPanel ? aPanel->activeWidget() : 0;
}
}
return anActiveWidget;
// 1. check whether the delete should be processed in the module
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
- isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ isNestedOp = sketchMgr()->isNestedSketchOperation(anOperation);
if (isSketchOp || isNestedOp) {
isProcessed = true;
// 2. find selected presentations
anOpMgr->startOperation(anOpAction);
+ // WORKAROUND, should be done to avoid viewer highlight update after deletetion of objects
+ // the problem is in AIS Dimensions recompute if a line and the dim are removed, line is the first
+ // it causes the AIS recompute, where the base line is null, the result is empty AIS in the viewer
+ XGUI_Tools::workshop(myWorkshop)->selector()->clearSelection();
+
// 4. delete features
// sketch feature should be skipped, only sub-features can be removed
// when sketch operation is active
void PartSet_Module::onFeatureTriggered()
{
- QAction* aCmd = dynamic_cast<QAction*>(sender());
+ // is commented for imp: Unpressing the button of the current action must behave like
+ // a validation if the entity can be created (instead of Cancel, as currently)
+ /*QAction* aCmd = dynamic_cast<QAction*>(sender());
if (aCmd->isCheckable() && aCmd->isChecked()) {
// 1. check whether the delete should be processed in the module
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
+ bool isNestedOp = myModule->sketchMgr()->isNestedCreateOperation(anOperation);
if (isNestedOp) {
// in case if in the viewer nothing is displayed, the create operation should not be
// comitted even if all values of the feature are initialized
launchOperation(aCmd->data().toString());
}
}
- }
+ }*/
ModuleBase_IModule::onFeatureTriggered();
}
+void PartSet_Module::editFeature(FeaturePtr theFeature)
+{
+ storeConstraintsState(theFeature->getKind());
+ ModuleBase_IModule::editFeature(theFeature);
+}
+
+bool PartSet_Module::canCommitOperation() const
+{
+ return true;
+}
+
void PartSet_Module::launchOperation(const QString& theCmdId)
+{
+ myIsOperationIsLaunched = true;
+ storeConstraintsState(theCmdId.toStdString());
+ updateConstraintsState(theCmdId.toStdString());
+
+ ModuleBase_IModule::launchOperation(theCmdId);
+
+ myIsOperationIsLaunched = false;
+}
+
+void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
{
if (myWorkshop->currentOperation() &&
myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
- const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates = mySketchMgr->showConstraintStates();
- myHasConstraintShown = aShownStates;
+ const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
+ mySketchMgr->showConstraintStates();
+ myHasConstraintShown = aShownStates;
}
- if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
+}
+
+void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
+{
+ if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
+ PartSet_SketcherMgr::replicationsIdList().contains(theFeatureKind.c_str())) {
// Show constraints if a constraint was anOperation
- mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Geometrical);
- mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Dimensional);
+ mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
+ mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
+ mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
+ myHasConstraintShown[PartSet_Tools::Expressions]);
}
- ModuleBase_IModule::launchOperation(theCmdId);
}
-
void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
{
Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
aDisplayer->updateViewer();
}
+bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
+{
+ return myCustomPrs->isActive(theFlag);
+}
+
void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
const bool theUpdateViewer)
{
{
bool aCustomized = false;
- if (theResult.get())
- return aCustomized;
-
XGUI_Workshop* aWorkshop = getWorkshop();
XGUI_Displayer* aDisplayer = aWorkshop->displayer();
ObjectPtr anObject = aDisplayer->getObject(thePrs);
- if (anObject.get()) {
+ if (!anObject)
+ return aCustomized;
+
+ if (!theResult.get()) {
bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
- // customize sketcy symbol presentation
+ // customize sketch symbol presentation
if (thePrs.get()) {
Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
if (!anAISIO.IsNull()) {
aPrs->SetConflictingConstraint(isConflicting, aColor);
aCustomized = true;
}
+ } else if (!Handle(SketcherPrs_Coincident)::DownCast(anAISIO).IsNull()) {
+ Handle(SketcherPrs_Coincident) aPrs = Handle(SketcherPrs_Coincident)::DownCast(anAISIO);
+ if (!aPrs.IsNull()) {
+ std::vector<int> aColor;
+ myOverconstraintListener->getConflictingColor(aColor);
+ aPrs->SetConflictingConstraint(isConflicting, aColor);
+ aCustomized = true;
+ }
}
}
}
if (aColor.empty())
XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
if (!aColor.empty()) {
- thePrs->setColor(aColor[0], aColor[1], aColor[2]);
- aCustomized = true;
+ aCustomized = thePrs->setColor(aColor[0], aColor[1], aColor[2]);
}
}
}
+ // customize dimentional constrains
+ sketchMgr()->customizePresentation(anObject);
return aCustomized;
}
aMenu.exec(aHeader->mapToGlobal(thePnt));
}
+Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
+{
+ return mySketchMgr->createPresentation(theResult);
+}
+
ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
{
return anObject;
}
+bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
+{
+ bool aCanBeShaged = true;
+
+ Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
+ if (!aPrs.IsNull())
+ aCanBeShaged = false;
+
+ return aCanBeShaged;
+}
+
void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
{
QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
bool hasResult = false;
bool hasFeature = false;
bool hasParameter = false;
- bool hasSubFeature = false;
- ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
-
+ bool hasCompositeOwner = false;
+ ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
+ hasCompositeOwner);
ObjectPtr aObject = aObjects.first();
if (aObject) {
ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
}
-//******************************************************
-void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
-{
-}
-
//******************************************************
void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
{
GeomShapePtr aGeomShape;
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ if (anOperation && sketchMgr()->isNestedSketchOperation(anOperation)) {
aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
}
return aGeomShape;
}
//******************************************************
-void PartSet_Module::onBooleanOperationChange(int theOperation)
+void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
+ int theIndex)
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (!aOperation)
+ PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
+ if (!aChoiceWidget)
return;
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- switch (theOperation) {
- case 0:
- aPanel->setWindowTitle(tr("Cut"));
- break;
- case 1:
- aPanel->setWindowTitle(tr("Fuse"));
- break;
- case 2:
- aPanel->setWindowTitle(tr("Common"));
- break;
+
+ QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
+ if (!aChoiceTitle.isEmpty()) {
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (!aOperation)
+ return;
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ if (aPanel)
+ aPanel->setWindowTitle(aChoiceTitle);
}
}
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
return aConnector->workshop();
}
+
+//******************************************************
+void PartSet_Module::setDefaultConstraintShown()
+{
+ myHasConstraintShown[PartSet_Tools::Geometrical] = true;
+ myHasConstraintShown[PartSet_Tools::Dimensional] = true;
+ myHasConstraintShown[PartSet_Tools::Expressions] = false;
+}
