#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Validators.h"
#include "PartSet_Tools.h"
+#include "PartSet_PreviewPlanes.h"
#include "PartSet_WidgetPoint2d.h"
#include "PartSet_WidgetPoint2dDistance.h"
#include "PartSet_WidgetPoint2DFlyout.h"
#include "PartSet_WidgetSketchCreator.h"
#include "PartSet_SketcherMgr.h"
#include "PartSet_SketcherReetntrantMgr.h"
+#include "PartSet_ResultSketchPrs.h"
#include "PartSet_MenuMgr.h"
#include "PartSet_CustomPrs.h"
#include "PartSet_IconFactory.h"
#include "PartSet_WidgetChoice.h"
+#include "PartSet_OverconstraintListener.h"
#include "PartSet_Filters.h"
#include "PartSet_FilterInfinite.h"
#include <ModuleBase_FilterFactory.h>
#include <ModuleBase_Tools.h>
#include <ModuleBase_OperationFeature.h>
+#include <ModuleBase_WidgetFactory.h>
+#include <ModuleBase_OperationDescription.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Events.h>
#include <ModelAPI_Session.h>
#include <ModelAPI_ResultBody.h>
#include <ModelAPI_AttributeString.h>
+#include <ModelAPI_AttributeSelectionList.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_SelectionMgr.h>
#include <XGUI_DataModel.h>
#include <XGUI_ErrorMgr.h>
+#include <XGUI_CustomPrs.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
#include <QMessageBox>
#include <QMainWindow>
#include <QLineEdit>
+#include <QString>
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomDataAPI_Dir.h>
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
- XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
- connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
- this, SLOT(onOperationActivatedByPreselection()));
-
ModuleBase_IViewer* aViewer = theWshop->viewer();
connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
myMenuMgr = new PartSet_MenuMgr(this);
myCustomPrs = new PartSet_CustomPrs(theWshop);
+ myOverconstraintListener = new PartSet_OverconstraintListener(theWshop);
+
Events_Loop* aLoop = Events_Loop::loop();
aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
myHasConstraintShown[PartSet_Tools::Geometrical] = true;
myHasConstraintShown[PartSet_Tools::Dimensional] = true;
+ myHasConstraintShown[PartSet_Tools::Expressions] = false;
Config_PropManager::registerProp("Visualization", "operation_parameter_color",
"Reference shape wireframe color in operation", Config_Prop::Color,
aFilter.Nullify();
}
delete myCustomPrs;
+ delete myOverconstraintListener;
}
void PartSet_Module::activateSelectionFilters()
}
}
+void PartSet_Module::storeSelection()
+{
+ sketchMgr()->storeSelection();
+}
+
+void PartSet_Module::restoreSelection()
+{
+ sketchMgr()->restoreSelection();
+}
+
void PartSet_Module::registerValidators()
{
//Registering of validators
aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
+ aFactory->registerValidator("PartSet_CollinearSelection", new PartSet_CollinearSelection);
+ aFactory->registerValidator("PartSet_MiddlePointSelection", new PartSet_MiddlePointSelection);
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
- aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
}
void PartSet_Module::registerFilters()
// the selection is cleared after commit the create operation
// in order to do not use the same selected objects in the restarted operation
// for common behaviour, the selection is cleared even if the operation is not restarted
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
- aWorkshop->selector()->clearSelection();
+ getWorkshop()->selector()->clearSelection();
}
}
}
}
void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
+{
+ ModuleBase_IWorkshop* anIWorkshop = workshop();
+ if (!theOperation->getDescription()->hasXmlRepresentation()) { //!< No need for property panel
+ anIWorkshop->updateCommandStatus();
+ }
+ else {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (theOperation);
+ if (aFOperation) {
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(anIWorkshop);
+ XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
+ ModuleBase_ModelWidget* aFilledWidget = 0;
+ bool aPostonedWidgetActivation = false;
+ FeaturePtr aFeature = aFOperation->feature();
+
+ std::string aGreedAttributeId = ModuleBase_Tools::findGreedAttribute(anIWorkshop, aFeature);
+ // if there is a greed attribute, automatic commit by preselection for this feature is prohibited
+ aWorkshop->setPropertyPanel(aFOperation);
+
+ // filling the operation values by the current selection
+ // if the operation can be committed after the controls filling, the method perform should
+ // be stopped. Otherwise unnecessary presentations can be shown(e.g. operation prs in sketch)
+ bool isOperationCommitted = false;
+ if (!aFOperation->isEditOperation()) {
+ aFilledWidget = aFOperation->activateByPreselection(aGreedAttributeId);
+ if (currentOperation() != aFOperation)
+ isOperationCommitted = true;
+ else {
+ if (aGreedAttributeId.empty()) {
+ // a signal should be emitted before the next widget activation
+ // because, the activation of the next widget will give a focus to the widget. As a result
+ // the value of the widget is initialized. And commit may happens until the value is entered.
+ if (aFilledWidget) {
+ if (mySketchReentrantMgr->canBeCommittedByPreselection())
+ isOperationCommitted = mySketchMgr->operationActivatedByPreselection();
+ // activate the next obligatory widget
+ if (!isOperationCommitted)
+ aPropertyPanel->activateNextWidget(aFilledWidget);
+ }
+ }
+ else { // there is a greed widget
+ const QList<ModuleBase_ModelWidget*>& aWidgets = aPropertyPanel->modelWidgets();
+ std::string aFirstAttributeId = aWidgets.front()->attributeID();
+ // activate next widget after greeded if it is the first widget in the panel
+ // else the first panel widget is already activated by operation start
+ if (aFirstAttributeId == aGreedAttributeId)
+ aPostonedWidgetActivation = true;
+ }
+ }
+ } if (!isOperationCommitted) {
+ anIWorkshop->updateCommandStatus();
+ aWorkshop->connectToPropertyPanel(true);
+ operationStartedInternal(aFOperation);
+
+ // the objects of the current operation should be deactivated
+ QObjectPtrList anObjects;
+ anObjects.append(aFeature);
+ std::list<ResultPtr> aResults = aFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
+ anObjects.append(*aIt);
+ }
+ QObjectPtrList::const_iterator anIt = anObjects.begin(), aLast = anObjects.end();
+ for (; anIt != aLast; anIt++)
+ aWorkshop->deactivateActiveObject(*anIt, false);
+ if (anObjects.size() > 0) {
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ aDisplayer->updateViewer();
+ }
+ }
+ if (aPostonedWidgetActivation) {
+ // if the widget is an empty in the chain of activated widgets, the current operation
+ // is restarted. It should be performed after functionality of the operation starting
+ aPropertyPanel->activateNextWidget(aFilledWidget);
+ }
+ }
+ }
+}
+
+void PartSet_Module::operationStartedInternal(ModuleBase_Operation* theOperation)
{
/// Restart sketcher operations automatically
mySketchReentrantMgr->operationStarted(theOperation);
void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
{
- bool isModified = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false) ||
- myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
+ bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
+ bool isModifiedResults = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
+ bool isModified = isModifiedArgs || isModifiedResults;
if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->stopNestedSketch(theOperation);
aLast = myHasConstraintShown.end();
for (; anIt != aLast; anIt++) {
myHasConstraintShown[anIt.key()];
- mySketchMgr->onShowConstraintsToggle(anIt.value(), myHasConstraintShown[anIt.key()]);
+ mySketchMgr->updateBySketchParameters(anIt.key(), anIt.value());
}
}
return mySketchMgr->canDisplayObject(theObject);
}
+void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
+{
+ mySketchMgr->processHiddenObject(theObjects);
+}
+
bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
{
bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
myMenuMgr->grantedOperationIds(theOperation, theIds);
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
-
+ XGUI_Workshop* aWorkshop = getWorkshop();
theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
}
}
{
myCustomPrs->clearPrs();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Workshop* aWorkshop = getWorkshop();
XGUI_Displayer* aDisplayer = aWorkshop->displayer();
aDisplayer->deactivateSelectionFilters();
}
aPanel->activateWidget(aPanel->modelWidgets().first());
}
+bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
+ QList<ModuleBase_ModelWidget*>& theWidgets) const
+{
+ bool aProcessed = false;
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ XGUI_Workshop* aWorkshop = getWorkshop();
+ XGUI_PropertyPanel* aPropertyPanel = aWorkshop->propertyPanel();
+ if (mySketchMgr->activeSketch().get() && aFOperation && aPropertyPanel) {
+ ModuleBase_ISelection* aSelection = workshop()->selection();
+ // click on a point in sketch leads here with the point is highlighted, not yet selected
+ QList<ModuleBase_ViewerPrs> aPreselection = aSelection->getHighlighted();
+ if (aPreselection.size() == 1) {
+ ModuleBase_ViewerPrs aSelectedPrs = aPreselection[0];
+ ObjectPtr anObject = aSelectedPrs.object();
+
+ FeaturePtr aFeature = ModelAPI_Feature::feature(anObject);
+ FeaturePtr anOpFeature = aFOperation->feature();
+ GeomShapePtr aShape = aSelectedPrs.shape();
+ // click on the digit of dimension constrain comes here with an empty shape, so we need the check
+ if (aFeature == anOpFeature && aShape.get() && !aShape->isNull()) {
+ const TopoDS_Shape& aTDShape = aShape->impl<TopoDS_Shape>();
+ AttributePtr anAttribute = PartSet_Tools::findAttributeBy2dPoint(anObject, aTDShape,
+ mySketchMgr->activeSketch());
+ if (anAttribute.get()) {
+ QString aXmlRepr = aFOperation->getDescription()->xmlRepresentation();
+ ModuleBase_WidgetFactory aFactory(aXmlRepr.toStdString(), workshop());
+
+ const std::string anAttributeId = anAttribute->id();
+ aFactory.createWidget(aPropertyPanel->contentWidget(), anAttributeId);
+
+ theWidgets = aFactory.getModelWidgets();
+ // it is possible that the point does not present in XML definition,
+ // in this case, we assume that it is not processed by this module
+ // e.g. "Intersection point" feature
+ aProcessed = !theWidgets.isEmpty();
+ }
+ }
+ }
+ }
+ return aProcessed;
+}
void PartSet_Module::onSelectionChanged()
{
anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
}
-void PartSet_Module::onOperationActivatedByPreselection()
-{
- if (!mySketchReentrantMgr->canBeCommittedByPreselection())
- return;
- mySketchMgr->operationActivatedByPreselection();
-}
-
-ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
- Config_WidgetAPI* theWidgetApi, std::string theParentId)
+ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
+ QWidget* theParent,
+ Config_WidgetAPI* theWidgetApi)
{
ModuleBase_IWorkshop* aWorkshop = workshop();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
- XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
+ XGUI_Workshop* aXUIWorkshop = getWorkshop();
ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
- theWidgetApi, theParentId, mySketchMgr->showConstraintStates());
+ theWidgetApi, myHasConstraintShown);
connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
- connect(aLabelWgt, SIGNAL(showConstraintToggled(bool, int)),
- mySketchMgr, SLOT(onShowConstraintsToggle(bool, int)));
+ connect(aLabelWgt, SIGNAL(showConstraintToggled(int, bool)),
+ mySketchMgr, SLOT(onShowConstraintsToggle(int, bool)));
aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
- theWidgetApi, theParentId);
+ theWidgetApi);
aPointWgt->setSketch(mySketchMgr->activeSketch());
connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
aWgt = aPointWgt;
}else if (theType == "sketch-2dpoint_flyout_selector") {
PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
- theWidgetApi, theParentId);
+ theWidgetApi);
aPointWgt->setSketch(mySketchMgr->activeSketch());
connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
aWgt = aPointWgt;
} else if (theType == "point2ddistance") {
PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
- aWorkshop, theWidgetApi, theParentId);
+ aWorkshop, theWidgetApi);
aDistanceWgt->setSketch(mySketchMgr->activeSketch());
aWgt = aDistanceWgt;
} else if (theType == "sketch_shape_selector") {
PartSet_WidgetShapeSelector* aShapeSelectorWgt =
- new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi);
aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aShapeSelectorWgt;
} else if (theType == "sketch_multi_selector") {
PartSet_WidgetMultiSelector* aShapeSelectorWgt =
- new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi);
aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aShapeSelectorWgt;
- } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
- aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
+ }
+ else if (theType == WDG_DOUBLEVALUE_EDITOR) {
+ aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi);
} else if (theType == "export_file_selector") {
- aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi);
} else if (theType == "sketch_launcher") {
- aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
+ aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi);
} else if (theType == "module_choice") {
- aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi, theParentId);
- connect(aWgt, SIGNAL(itemSelected(int)), SLOT(onBooleanOperationChange(int)));
+ aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi);
+ connect(aWgt, SIGNAL(itemSelected(ModuleBase_ModelWidget*, int)),
+ this, SLOT(onChoiceChanged(ModuleBase_ModelWidget*, int)));
}
return aWgt;
}
{
bool isProcessed = false;
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Workshop* aWorkshop = getWorkshop();
XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
//SessionPtr aMgr = ModelAPI_Session::get();
ModuleBase_IModule::onFeatureTriggered();
}
+void PartSet_Module::editFeature(FeaturePtr theFeature)
+{
+ storeConstraintsState(theFeature->getKind());
+ ModuleBase_IModule::editFeature(theFeature);
+}
+
+bool PartSet_Module::canCommitOperation() const
+{
+ return true;
+}
+
void PartSet_Module::launchOperation(const QString& theCmdId)
+{
+ storeConstraintsState(theCmdId.toStdString());
+ ModuleBase_IModule::launchOperation(theCmdId);
+}
+
+void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
{
if (myWorkshop->currentOperation() &&
myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
- const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates = mySketchMgr->showConstraintStates();
- myHasConstraintShown = aShownStates;
+ const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates =
+ mySketchMgr->showConstraintStates();
+ myHasConstraintShown = aShownStates;
}
- if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
+ if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str())) {
// Show constraints if a constraint was anOperation
- mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Geometrical);
- mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Dimensional);
+ mySketchMgr->updateBySketchParameters(PartSet_Tools::Geometrical, true);
+ mySketchMgr->updateBySketchParameters(PartSet_Tools::Dimensional, true);
+ mySketchMgr->updateBySketchParameters(PartSet_Tools::Expressions,
+ myHasConstraintShown[PartSet_Tools::Expressions]);
}
- ModuleBase_IModule::launchOperation(theCmdId);
}
-
void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
{
Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
//Handle(V3d_View) aView = aViewer->activeView();
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Workshop* aWorkshop = getWorkshop();
XGUI_Displayer* aDisplayer = aWorkshop->displayer();
Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
Handle(V3d_View) aView;
}
if (aView.IsNull())
return;
- double aLen = aView->Convert(20);
+ double aLen = aView->Convert(SketcherPrs_Tools::getDefaultArrowSize());
double aPrevLen = SketcherPrs_Tools::getArrowSize();
SketcherPrs_Tools::setArrowSize(aLen);
myCustomPrs->deactivate(theFlag, theUpdateViewer);
}
+bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
+ std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
+{
+ bool aCustomized = false;
+
+ if (theResult.get())
+ return aCustomized;
+
+ XGUI_Workshop* aWorkshop = getWorkshop();
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ ObjectPtr anObject = aDisplayer->getObject(thePrs);
+ if (anObject.get()) {
+ bool isConflicting = myOverconstraintListener->isConflictingObject(anObject);
+ // customize sketch symbol presentation
+ if (thePrs.get()) {
+ Handle(AIS_InteractiveObject) anAISIO = thePrs->impl<Handle(AIS_InteractiveObject)>();
+ if (!anAISIO.IsNull()) {
+ if (!Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO).IsNull()) {
+ Handle(SketcherPrs_SymbolPrs) aPrs = Handle(SketcherPrs_SymbolPrs)::DownCast(anAISIO);
+ if (!aPrs.IsNull()) {
+ std::vector<int> aColor;
+ myOverconstraintListener->getConflictingColor(aColor);
+ aPrs->SetConflictingConstraint(isConflicting, aColor);
+ aCustomized = true;
+ }
+ }
+ }
+ }
+ // customize sketch dimension constraint presentation
+ if (!aCustomized) {
+ std::vector<int> aColor;
+ if (isConflicting) {
+ myOverconstraintListener->getConflictingColor(aColor);
+ }
+ if (aColor.empty())
+ XGUI_CustomPrs::getDefaultColor(anObject, true, aColor);
+ if (!aColor.empty()) {
+ thePrs->setColor(aColor[0], aColor[1], aColor[2]);
+ aCustomized = true;
+ }
+ }
+
+ // customize dimentional constrains
+ sketchMgr()->customizePresentation(anObject);
+ }
+
+ return aCustomized;
+}
+
bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
const bool theUpdateViewer)
{
SessionPtr aMgr = ModelAPI_Session::get();
QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Workshop* aWorkshop = getWorkshop();
QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
aMenu.exec(aHeader->mapToGlobal(thePnt));
}
+Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
+{
+ return mySketchMgr->createPresentation(theResult);
+}
+
ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
{
if (aOperation) {
/// If last line finished on vertex the lines creation sequence has to be break
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
- // if there is an active widget, find the presented object in it
- if (!anActiveWidget)
- anActiveWidget = aPanel->preselectionWidget();
+ if (aPanel) {
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ // if there is an active widget, find the presented object in it
+ if (!anActiveWidget)
+ anActiveWidget = aPanel->preselectionWidget();
- ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
- (anActiveWidget);
- if (aWidgetValidated)
- anObject = aWidgetValidated->findPresentedObject(theAIS);
+ ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
+ (anActiveWidget);
+ if (aWidgetValidated)
+ anObject = aWidgetValidated->findPresentedObject(theAIS);
+ }
}
return anObject;
}
+bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
+{
+ bool aCanBeShaged = true;
+
+ Handle(PartSet_ResultSketchPrs) aPrs = Handle(PartSet_ResultSketchPrs)::DownCast(theAIS);
+ if (!aPrs.IsNull())
+ aCanBeShaged = false;
+
+ return aCanBeShaged;
+}
+
void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
{
QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
if (myWorkshop->currentOperation() &&
(!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
return;
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Workshop* aWorkshop = getWorkshop();
XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
QPalette aPalet = aLabel->palette();
if (theIndex.column() != 0) // Use only first column
return;
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Workshop* aWorkshop = getWorkshop();
XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
// De not use non editable Indexes
if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
}
//******************************************************
-void PartSet_Module::onBooleanOperationChange(int theOperation)
+GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (!aOperation)
+ GeomShapePtr aGeomShape;
+
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
+ }
+ return aGeomShape;
+}
+
+//******************************************************
+AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
+ const GeomShapePtr& theGeomShape)
+{
+ AttributePtr anAttribute;
+ GeomShapePtr aGeomShape = theGeomShape;
+ if (!aGeomShape.get()) {
+ // processing shape of result, e.g. sketch circle center is selected, this is a result
+ // the geom shape is empty, the shape of result should be used
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
+ if (aResult.get()) {
+ aGeomShape = aResult->shape();
+ }
+ }
+
+ if (aGeomShape.get()) {
+ TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
+ return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
+ mySketchMgr->activeSketch());
+ }
+ return anAttribute;
+}
+
+//******************************************************
+void PartSet_Module::onChoiceChanged(ModuleBase_ModelWidget* theWidget,
+ int theIndex)
+{
+ PartSet_WidgetChoice* aChoiceWidget = dynamic_cast<PartSet_WidgetChoice*>(theWidget);
+ if (!aChoiceWidget)
return;
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- switch (theOperation) {
- case 0:
- aPanel->setWindowTitle(tr("Cut"));
- break;
- case 1:
- aPanel->setWindowTitle(tr("Fuse"));
- break;
- case 2:
- aPanel->setWindowTitle(tr("Common"));
- break;
+
+ QString aChoiceTitle = aChoiceWidget->getPropertyPanelTitle(theIndex);
+ if (!aChoiceTitle.isEmpty()) {
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (!aOperation)
+ return;
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ aPanel->setWindowTitle(aChoiceTitle);
}
}
+
+//******************************************************
+XGUI_Workshop* PartSet_Module::getWorkshop() const
+{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ return aConnector->workshop();
+}