#include <PartSet_WidgetPoint2d.h>
#include <PartSet_WidgetPoint2dDistance.h>
#include <PartSet_WidgetShapeSelector.h>
-#include <PartSet_SketcherMgr.h>
+#include <PartSet_WidgetEditor.h>
+#include "PartSet_SketcherMgr.h"
+#include "PartSet_MenuMgr.h"
#include <ModuleBase_Operation.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_WidgetEditor.h>
#include <ModuleBase_FilterFactory.h>
-#include <ModuleBase_FilterLinearEdge.h>
-#include <ModuleBase_FilterFace.h>
+#include <GeomValidators_Edge.h>
+#include <GeomValidators_EdgeOrVertex.h>
+#include <GeomValidators_Face.h>
+#include <GeomValidators_ConstructionComposite.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_Session.h>
+#include <ModelAPI_ShapeValidator.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_OperationMgr.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ModuleConnector.h>
+#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Tools.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
#include <SketchPlugin_Line.h>
-//#include <SketchPlugin_Arc.h>
-//#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_Arc.h>
+#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_Point.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
-//#include <SketchPlugin_ConstraintRigid.h>
+
+#include <SketcherPrs_SymbolPrs.h>
+#include <SketcherPrs_Tools.h>
#include <Events_Loop.h>
+#include <Config_PropManager.h>
+#include <Config_Keywords.h>
#include <StdSelect_TypeOfFace.hxx>
#include <TopoDS_Vertex.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Shape.hxx>
#include <BRep_Tool.hxx>
+#include <AIS_Dimension.hxx>
#include <QObject>
#include <QMouseEvent>
#include <QString>
#include <QTimer>
#include <QApplication>
+#include <QMessageBox>
+#include <QMainWindow>
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomDataAPI_Dir.h>
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
: ModuleBase_IModule(theWshop),
- myRestartingMode(RM_None)
+ myRestartingMode(RM_None), myVisualLayerId(0)
{
- //myWorkshop = dynamic_cast<XGUI_Workshop*>(theWshop);
mySketchMgr = new PartSet_SketcherMgr(this);
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
ModuleBase_IViewer* aViewer = theWshop->viewer();
connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
+ connect(aViewer, SIGNAL(viewTransformed(int)),
+ SLOT(onViewTransformed(int)));
+
+ myMenuMgr = new PartSet_MenuMgr(this);
}
PartSet_Module::~PartSet_Module()
//Registering of validators
SessionPtr aMgr = ModelAPI_Session::get();
ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
- aFactory->registerValidator("PartSet_DistanceValidator", new PartSet_DistanceValidator);
- aFactory->registerValidator("PartSet_LengthValidator", new PartSet_LengthValidator);
- aFactory->registerValidator("PartSet_PerpendicularValidator", new PartSet_PerpendicularValidator);
- aFactory->registerValidator("PartSet_ParallelValidator", new PartSet_ParallelValidator);
- aFactory->registerValidator("PartSet_RadiusValidator", new PartSet_RadiusValidator);
- aFactory->registerValidator("PartSet_RigidValidator", new PartSet_RigidValidator);
+ aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
+ aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
+ aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
+ aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
+ aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
+ aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
+ aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
+ aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
+ aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
+ aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
+
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
+ aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
+
+ aFactory->registerValidator("GeomValidators_Edge", new GeomValidators_Edge);
+ aFactory->registerValidator("GeomValidators_EdgeOrVertex",
+ new GeomValidators_EdgeOrVertex);
+ aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
+
+ aFactory->registerValidator("GeomValidators_ConstructionComposite",
+ new GeomValidators_ConstructionComposite);
+
+ aFactory->registerValidator("PartSet_SketchEntityValidator",
+ new PartSet_SketchEntityValidator);
+
+ aFactory->registerValidator("PartSet_SameTypeAttr",
+ new PartSet_SameTypeAttrValidator);
}
void PartSet_Module::registerFilters()
//Registering of selection filters
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
+}
- aFactory->registerFilter("EdgeFilter", new ModuleBase_FilterLinearEdge);
- aFactory->registerFilter("FaceFilter", new ModuleBase_FilterFace);
+void PartSet_Module::registerProperties()
+{
+ Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
+ PLANE_SIZE);
+ Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
+ Config_Prop::Integer, SKETCH_WIDTH);
}
void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
{
+ if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->commitNestedSketch(theOperation);
+ }
+
if (theOperation->isEditOperation())
return;
+ // the selection is cleared after commit the create operation
+ // in order to do not use the same selected objects in the restarted operation
+ // for common behaviour, the selection is cleared even if the operation is not restarted
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
+ if (!aContext.IsNull())
+ aContext->ClearSelected();
+
/// Restart sketcher operations automatically
FeaturePtr aFeature = theOperation->feature();
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
myRestartingMode == RM_EmptyFeatureUsed)) {
myLastOperationId = theOperation->id();
myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
+
launchOperation(myLastOperationId);
}
breakOperationSequence();
void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
- if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
+ Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ aViewer->AddZLayer(myVisualLayerId);
mySketchMgr->startSketch(theOperation);
}
+ else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->startNestedSketch(theOperation);
+ }
+
if (myDocumentShapeFilter.IsNull())
myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
{
- if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->stopSketch(theOperation);
+ Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ aViewer->RemoveZLayer(myVisualLayerId);
+ myVisualLayerId = 0;
+ }
+ else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->stopNestedSketch(theOperation);
}
myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
}
+ModuleBase_Operation* PartSet_Module::currentOperation() const
+{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
+ return anOpMgr->currentOperation();
+}
+
+bool PartSet_Module::canUndo() const
+{
+ bool aCanUndo = false;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
+ aCanUndo = !aMgr->isOperation();
+ if (!aCanUndo) // check the enable state additionally by sketch manager
+ aCanUndo = aMgr->canUndo();
+ }
+ return aCanUndo;
+}
+
+bool PartSet_Module::canRedo() const
+{
+ bool aCanRedo = false;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
+ aCanRedo = !aMgr->isOperation();
+ if (!aCanRedo) // check the enable state additionally by sketch manager
+ aCanRedo = aMgr->canRedo();
+ }
+ return aCanRedo;
+}
+
+bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
+{
+ // the sketch manager put the restriction to the objects display
+ return mySketchMgr->canDisplayObject(theObject);
+}
+
+
+bool PartSet_Module::addViewerItems(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
+{
+ return myMenuMgr->addViewerItems(theMenu, theStdActions);
+}
+
+bool PartSet_Module::isMouseOverWindow()
+{
+ return mySketchMgr->isMouseOverWindow();
+}
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
- if ((theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) &&
- (theOperation->isEditOperation())) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
// we have to manually activate the sketch label in edit mode
aPanel->activateWidget(aPanel->modelWidgets().first());
return;
aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
aWgt->attributeID(), aPoint->x(), aPoint->y());
- theOperation->propertyPanel()->activateNextWidget(aPnt2dWgt);
+ aPanel->activateNextWidget(aPnt2dWgt);
}
}
}
} else {
// Start editing constraint
if (theOperation->isEditOperation()) {
+ // TODO: #391 - to be removed
std::string aId = theOperation->id().toStdString();
- if (PartSet_SketcherMgr::sketchOperationIdList().contains(QString(aId.c_str()))) {
- if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
- // Find and activate widget for management of point for dimension line position
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aPntWgt) {
- aPanel->activateWidget(aPntWgt);
- return;
- }
+ if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation) &&
+ PartSet_SketcherMgr::isDistanceOperation(theOperation)) {
+ // Find and activate widget for management of point for dimension line position
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
+ PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
+ if (aPntWgt) {
+ aPanel->activateWidget(aPntWgt);
+ return;
}
- }
+ }
}
}
}
// An edit operation is enable only if the current opeation is the sketch operation
if (mySketchMgr->activeSketch()) {
if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
- isSketcherOp = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
+ isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
}
if (isSketcherOp) {
// Editing of constraints can be done on selection
}
}
}
- } else if (mySketchMgr->sketchOperationIdList().contains(aOperation->id()) &&
- aOperation->isEditOperation()) {
- // if this is sketch operation in edit mode
-
- ModuleBase_ISelection* aSelect = myWorkshop->selection();
- //aSelect->selectedShapes();
- }
+ }
}
- // after movement the solver will call the update event: optimization
-
void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
void PartSet_Module::onOperationActivatedByPreselection()
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (!aOperation)
- return;
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ // Set final definitions if they are necessary
+ //propertyPanelDefined(aOperation);
- // Set final definitions if they are necessary
- //propertyPanelDefined(aOperation);
-
- /// Commit sketcher operations automatically
- FeaturePtr aFeature = aOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
- aOperation->commit();
+ /// Commit sketcher operations automatically
+ anOperation->commit();
}
}
void PartSet_Module::onNoMoreWidgets()
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation) {
- /// Restart sketcher operations automatically
- FeaturePtr aFeature = aOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if (anOperation) {
+ if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
if (myRestartingMode != RM_Forbided)
myRestartingMode = RM_LastFeatureUsed;
- aOperation->commit();
+ anOperation->commit();
}
}
}
-void PartSet_Module::onVertexSelected(ObjectPtr theObject, const TopoDS_Shape& theShape)
+void PartSet_Module::onVertexSelected()
{
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
/// If last line finished on vertex the lines creation sequence has to be break
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
- if (aWidgets.last() == aPanel->activeWidget()) {
- myRestartingMode = RM_Forbided;
+ QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
+ bool aFoundWidget = false;
+ bool aFoundObligatory = false;
+ for (; anIt != aLast && !aFoundObligatory; anIt++) {
+ if (!aFoundWidget)
+ aFoundWidget = *anIt == anActiveWidget;
+ else
+ aFoundObligatory = (*anIt)->isObligatory();
}
+ if (!aFoundObligatory)
+ myRestartingMode = RM_Forbided;
}
}
-QWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
- Config_WidgetAPI* theWidgetApi, std::string theParentId,
- QList<ModuleBase_ModelWidget*>& theModelWidgets)
+ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
+ Config_WidgetAPI* theWidgetApi, std::string theParentId)
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
- PartSet_WidgetSketchLabel* aWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- connect(aWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
+ PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
+ theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
+ aLabelWgt->setWorkshop(aWorkshop);
+ connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
+ connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
+ mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
+ aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
- PartSet_WidgetPoint2D* aWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(mySketchMgr->activeSketch());
-
- connect(aWgt, SIGNAL(vertexSelected(ObjectPtr, const TopoDS_Shape&)),
- this, SLOT(onVertexSelected(ObjectPtr, const TopoDS_Shape&)));
-
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
+ PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
+ aPointWgt->setWorkshop(aWorkshop);
+ aPointWgt->setSketch(mySketchMgr->activeSketch());
+ connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
+ aWgt = aPointWgt;
} if (theType == "point2ddistance") {
- PartSet_WidgetPoint2dDistance* aWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(mySketchMgr->activeSketch());
-
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
+ PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
+ aDistanceWgt->setWorkshop(aWorkshop);
+ aDistanceWgt->setSketch(mySketchMgr->activeSketch());
+ aWgt = aDistanceWgt;
} if (theType == "sketch_shape_selector") {
- PartSet_WidgetShapeSelector* aWgt =
+ PartSet_WidgetShapeSelector* aShapeSelectorWgt =
new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(mySketchMgr->activeSketch());
+ aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
+ aWgt = aShapeSelectorWgt;
+ } if (theType == WDG_DOUBLEVALUE_EDITOR) {
+ aWgt = new PartSet_WidgetEditor(theParent, workshop(), theWidgetApi, theParentId);
+ }
+ return aWgt;
+}
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
- } if (theType == "sketch_constraint_shape_selector") {
- PartSet_WidgetConstraintShapeSelector* aWgt =
- new PartSet_WidgetConstraintShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(mySketchMgr->activeSketch());
+bool PartSet_Module::deleteObjects()
+{
+ // 1. check whether the delete should be processed in the module
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
+ isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (!isSketchOp && !isNestedOp)
+ return false;
+
+ // 2. find selected presentations
+ // selected objects should be collected before the current operation abort because
+ // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_ISelection* aSel = workshop()->selection();
+ QObjectPtrList aSelectedObj = aSel->selectedPresentations();
+ // if there are no selected objects in the viewer, that means that the selection in another
+ // place cased this method. It is necessary to return the false value to understande in above
+ // method that delete is not processed
+ if (aSelectedObj.count() == 0)
+ return false;
+
+ // the active nested sketch operation should be aborted unconditionally
+ if (isNestedOp)
+ anOperation->abort();
+
+ // 3. start operation
+ QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
+ SessionPtr aMgr = ModelAPI_Session::get();
+ aMgr->startOperation(aDescription.toStdString());
+
+ // 4. delete features
+ // sketch feature should be skipped, only sub-features can be removed
+ // when sketch operation is active
+ std::set<FeaturePtr> anIgnoredFeatures;
+ anIgnoredFeatures.insert(mySketchMgr->activeSketch());
+ aWorkshop->deleteFeatures(aSelectedObj, anIgnoredFeatures);
+
+ // 5. stop operation
+ aWorkshop->displayer()->updateViewer();
+ aMgr->finishOperation();
+
+ return true;
+}
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
- } else
- return 0;
+void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
+{
+ Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
+ if (!anAIS.IsNull()) {
+ Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
+ if (!aDim.IsNull()) {
+ aCtx->SetZLayer(aDim, myVisualLayerId);
+ } else {
+ Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
+ if (!aCons.IsNull())
+ aCtx->SetZLayer(aCons, myVisualLayerId);
+ }
+ }
}
+void PartSet_Module::onViewTransformed(int theTrsfType)
+{
+ // Set length of arrows constant in pixel size
+ // if the operation is panning or rotate or panglobal then do nothing
+ if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
+ return;
+
+ ModuleBase_IViewer* aViewer = myWorkshop->viewer();
+ Handle(V3d_View) aView = aViewer->activeView();
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
+
+ double aLen = aView->Convert(15);
+
+ SketcherPrs_Tools::setArrowSize(aLen);
+ bool isModified = false;
+ QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
+ foreach (AISObjectPtr aAIS, aPrsList) {
+ Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
+
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
+ if (!aDim.IsNull()) {
+ aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
+ aContext->Redisplay(aDim, false);
+ isModified = true;
+ }
+ }
+ if (isModified)
+ aDisplayer->updateViewer();
+}
