#include <PartSet_WidgetPoint2d.h>
#include <PartSet_WidgetPoint2dDistance.h>
#include <PartSet_WidgetShapeSelector.h>
-#include <PartSet_SketcherMgr.h>
+#include <PartSet_WidgetEditor.h>
+#include "PartSet_SketcherMgr.h"
+#include "PartSet_MenuMgr.h"
#include <ModuleBase_Operation.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_WidgetEditor.h>
#include <ModuleBase_FilterFactory.h>
-#include <ModuleBase_FilterLinearEdge.h>
-#include <ModuleBase_FilterFace.h>
-#include <ModuleBase_FilterMulti.h>
-#include <ModuleBase_FilterCustom.h>
-#include <ModuleBase_FilterNoConsructionSubShapes.h>
+#include <GeomValidators_Edge.h>
+#include <GeomValidators_EdgeOrVertex.h>
+#include <GeomValidators_Face.h>
+#include <GeomValidators_ConstructionComposite.h>
+
#include <ModelAPI_Object.h>
#include <ModelAPI_Events.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_Session.h>
+#include <ModelAPI_ShapeValidator.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_OperationMgr.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ModuleConnector.h>
+#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Tools.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
#include <SketchPlugin_Line.h>
-//#include <SketchPlugin_Arc.h>
-//#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_Arc.h>
+#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_Point.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
-//#include <SketchPlugin_ConstraintRigid.h>
+
+#include <SketcherPrs_SymbolPrs.h>
+#include <SketcherPrs_Tools.h>
#include <Events_Loop.h>
+#include <Config_PropManager.h>
+#include <Config_Keywords.h>
#include <StdSelect_TypeOfFace.hxx>
#include <TopoDS_Vertex.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Shape.hxx>
#include <BRep_Tool.hxx>
+#include <AIS_Dimension.hxx>
#include <QObject>
#include <QMouseEvent>
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
: ModuleBase_IModule(theWshop),
- myRestartingMode(RM_None)
+ myRestartingMode(RM_None), myVisualLayerId(0)
{
- //myWorkshop = dynamic_cast<XGUI_Workshop*>(theWshop);
mySketchMgr = new PartSet_SketcherMgr(this);
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
ModuleBase_IViewer* aViewer = theWshop->viewer();
connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
+ connect(aViewer, SIGNAL(viewTransformed(int)),
+ SLOT(onViewTransformed(int)));
- createActions();
+ myMenuMgr = new PartSet_MenuMgr(this);
}
PartSet_Module::~PartSet_Module()
//Registering of validators
SessionPtr aMgr = ModelAPI_Session::get();
ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
- aFactory->registerValidator("PartSet_DistanceValidator", new PartSet_DistanceValidator);
- aFactory->registerValidator("PartSet_LengthValidator", new PartSet_LengthValidator);
- aFactory->registerValidator("PartSet_PerpendicularValidator", new PartSet_PerpendicularValidator);
- aFactory->registerValidator("PartSet_ParallelValidator", new PartSet_ParallelValidator);
- aFactory->registerValidator("PartSet_RadiusValidator", new PartSet_RadiusValidator);
- aFactory->registerValidator("PartSet_RigidValidator", new PartSet_RigidValidator);
+ aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
+ aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
+ aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
+ aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
+ aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
+ aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
+ aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
+ aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
+ aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
+ aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
+
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
- aFactory->registerValidator("PartSet_SketchValidator", new PartSet_SketchValidator);
+ aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
+
+ aFactory->registerValidator("GeomValidators_Edge", new GeomValidators_Edge);
+ aFactory->registerValidator("GeomValidators_EdgeOrVertex",
+ new GeomValidators_EdgeOrVertex);
+ aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
+
+ aFactory->registerValidator("GeomValidators_ConstructionComposite",
+ new GeomValidators_ConstructionComposite);
+
+ aFactory->registerValidator("PartSet_SketchEntityValidator",
+ new PartSet_SketchEntityValidator);
+
+ aFactory->registerValidator("PartSet_SameTypeAttr",
+ new PartSet_SameTypeAttrValidator);
}
void PartSet_Module::registerFilters()
//Registering of selection filters
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
+}
- aFactory->registerFilter("EdgeFilter", new ModuleBase_FilterLinearEdge);
- aFactory->registerFilter("FaceFilter", new ModuleBase_FilterFace);
- aFactory->registerFilter("MultiFilter", new ModuleBase_FilterMulti);
- Handle(SelectMgr_Filter) aSelectFilter = new ModuleBase_FilterNoConsructionSubShapes(workshop());
- aFactory->registerFilter("NoConstructionSubShapesFilter",
- new ModuleBase_FilterCustom(aSelectFilter));
+void PartSet_Module::registerProperties()
+{
+ Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
+ PLANE_SIZE);
+ Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
+ Config_Prop::Integer, SKETCH_WIDTH);
}
void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
{
+ if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->commitNestedSketch(theOperation);
+ }
+
if (theOperation->isEditOperation())
return;
// the selection is cleared after commit the create operation
void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
- if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
+ Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ aViewer->AddZLayer(myVisualLayerId);
mySketchMgr->startSketch(theOperation);
}
+ else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->startNestedSketch(theOperation);
+ }
+
if (myDocumentShapeFilter.IsNull())
myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
{
- if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->stopSketch(theOperation);
+ Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ aViewer->RemoveZLayer(myVisualLayerId);
+ myVisualLayerId = 0;
+ }
+ else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->stopNestedSketch(theOperation);
}
myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
}
-bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
+ModuleBase_Operation* PartSet_Module::currentOperation() const
{
- bool aCanDisplay = false;
- if (mySketchMgr->activeSketch()) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
+ return anOpMgr->currentOperation();
+}
- if (aFeature.get() != NULL) {
- if (aFeature == mySketchMgr->activeSketch()) {
- aCanDisplay = false;
- }
- else {
- aCanDisplay = mySketchMgr->sketchOperationIdList().contains(aFeature->getKind().c_str());
- }
- }
- }
- else {
- aCanDisplay = ModuleBase_IModule::canDisplayObject(theObject);
+bool PartSet_Module::canUndo() const
+{
+ bool aCanUndo = false;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
+ aCanUndo = !aMgr->isOperation();
+ if (!aCanUndo) // check the enable state additionally by sketch manager
+ aCanUndo = aMgr->canUndo();
}
- return aCanDisplay;
+ return aCanUndo;
}
-void PartSet_Module::addViewerItems(QMenu* theMenu) const
+bool PartSet_Module::canRedo() const
{
- if (!isSketchOperationActive() && !isSketchFeatureOperationActive())
- return;
- ModuleBase_ISelection* aSelection = myWorkshop->selection();
- QObjectPtrList aObjects = aSelection->selectedPresentations();
- if (aObjects.size() > 0) {
- bool hasFeature = false;
- foreach(ObjectPtr aObject, aObjects)
- {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
- if (aFeature.get() != NULL) {
- hasFeature = true;
- }
- }
- if (hasFeature)
- theMenu->addAction(action("DELETE_PARTSET_CMD"));
+ bool aCanRedo = false;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
+ aCanRedo = !aMgr->isOperation();
+ if (!aCanRedo) // check the enable state additionally by sketch manager
+ aCanRedo = aMgr->canRedo();
}
+ return aCanRedo;
+}
+
+bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
+{
+ // the sketch manager put the restriction to the objects display
+ return mySketchMgr->canDisplayObject(theObject);
+}
+
+
+bool PartSet_Module::addViewerItems(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
+{
+ return myMenuMgr->addViewerItems(theMenu, theStdActions);
+}
+
+bool PartSet_Module::isMouseOverWindow()
+{
+ return mySketchMgr->isMouseOverWindow();
}
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
- if ((theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) &&
- (theOperation->isEditOperation())) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
// we have to manually activate the sketch label in edit mode
aPanel->activateWidget(aPanel->modelWidgets().first());
return;
if (theOperation->isEditOperation()) {
// TODO: #391 - to be removed
std::string aId = theOperation->id().toStdString();
- if (PartSet_SketcherMgr::sketchOperationIdList().contains(QString(aId.c_str()))) {
- if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
- // Find and activate widget for management of point for dimension line position
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aPntWgt) {
- aPanel->activateWidget(aPntWgt);
- return;
- }
+ if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation) &&
+ PartSet_SketcherMgr::isDistanceOperation(theOperation)) {
+ // Find and activate widget for management of point for dimension line position
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
+ PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
+ if (aPntWgt) {
+ aPanel->activateWidget(aPntWgt);
+ return;
}
- }
+ }
}
}
}
// An edit operation is enable only if the current opeation is the sketch operation
if (mySketchMgr->activeSketch()) {
if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
- isSketcherOp = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
+ isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
}
if (isSketcherOp) {
// Editing of constraints can be done on selection
void PartSet_Module::onOperationActivatedByPreselection()
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if(aOperation && isSketchFeatureOperationActive()) {
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
// Set final definitions if they are necessary
//propertyPanelDefined(aOperation);
/// Commit sketcher operations automatically
- aOperation->commit();
+ anOperation->commit();
}
}
void PartSet_Module::onNoMoreWidgets()
{
- if (isSketchFeatureOperationActive()) {
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation) {
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if (anOperation) {
+ if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
if (myRestartingMode != RM_Forbided)
myRestartingMode = RM_LastFeatureUsed;
- aOperation->commit();
+ anOperation->commit();
}
}
}
if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
/// If last line finished on vertex the lines creation sequence has to be break
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
- if (aWidgets.last() == aPanel->activeWidget()) {
- myRestartingMode = RM_Forbided;
+ QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
+ bool aFoundWidget = false;
+ bool aFoundObligatory = false;
+ for (; anIt != aLast && !aFoundObligatory; anIt++) {
+ if (!aFoundWidget)
+ aFoundWidget = *anIt == anActiveWidget;
+ else
+ aFoundObligatory = (*anIt)->isObligatory();
}
+ if (!aFoundObligatory)
+ myRestartingMode = RM_Forbided;
}
}
-QWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
- Config_WidgetAPI* theWidgetApi, std::string theParentId,
- QList<ModuleBase_ModelWidget*>& theModelWidgets)
+ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
+ Config_WidgetAPI* theWidgetApi, std::string theParentId)
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
- PartSet_WidgetSketchLabel* aWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- connect(aWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
+ PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
+ theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
+ aLabelWgt->setWorkshop(aWorkshop);
+ connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
+ connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
+ mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
+ aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
- PartSet_WidgetPoint2D* aWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(mySketchMgr->activeSketch());
-
- connect(aWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
-
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
+ PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
+ aPointWgt->setWorkshop(aWorkshop);
+ aPointWgt->setSketch(mySketchMgr->activeSketch());
+ connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
+ aWgt = aPointWgt;
} if (theType == "point2ddistance") {
- PartSet_WidgetPoint2dDistance* aWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(mySketchMgr->activeSketch());
-
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
+ PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
+ aDistanceWgt->setWorkshop(aWorkshop);
+ aDistanceWgt->setSketch(mySketchMgr->activeSketch());
+ aWgt = aDistanceWgt;
} if (theType == "sketch_shape_selector") {
- PartSet_WidgetShapeSelector* aWgt =
+ PartSet_WidgetShapeSelector* aShapeSelectorWgt =
new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(mySketchMgr->activeSketch());
-
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
- } if (theType == "sketch_constraint_shape_selector") {
- PartSet_WidgetConstraintShapeSelector* aWgt =
- new PartSet_WidgetConstraintShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(mySketchMgr->activeSketch());
-
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
- } else
- return 0;
+ aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
+ aWgt = aShapeSelectorWgt;
+ } if (theType == WDG_DOUBLEVALUE_EDITOR) {
+ aWgt = new PartSet_WidgetEditor(theParent, workshop(), theWidgetApi, theParentId);
+ }
+ return aWgt;
}
-bool PartSet_Module::isSketchOperationActive() const
-{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
-
- bool isSketchOp = aOperation && aOperation->id().toStdString() == SketchPlugin_Sketch::ID();
- return isSketchOp;
-}
-bool PartSet_Module::isSketchFeatureOperationActive() const
+bool PartSet_Module::deleteObjects()
{
- bool isCurrentSketchOp = false;
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation) {
- FeaturePtr aFeature = aOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- isCurrentSketchOp = aSPFeature.get() != NULL;
- }
- return isCurrentSketchOp;
-}
+ // 1. check whether the delete should be processed in the module
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
+ isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (!isSketchOp && !isNestedOp)
+ return false;
+
+ // 2. find selected presentations
+ // selected objects should be collected before the current operation abort because
+ // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_ISelection* aSel = workshop()->selection();
+ QObjectPtrList aSelectedObj = aSel->selectedPresentations();
+ // if there are no selected objects in the viewer, that means that the selection in another
+ // place cased this method. It is necessary to return the false value to understande in above
+ // method that delete is not processed
+ if (aSelectedObj.count() == 0)
+ return false;
+
+ // the active nested sketch operation should be aborted unconditionally
+ if (isNestedOp)
+ anOperation->abort();
+
+ // 3. start operation
+ QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
+ SessionPtr aMgr = ModelAPI_Session::get();
+ aMgr->startOperation(aDescription.toStdString());
-void PartSet_Module::createActions()
-{
- QAction* aAction = new QAction(QIcon(":pictures/delete.png"), tr("Delete"), this);
- addAction("DELETE_PARTSET_CMD", aAction);
-}
+ // 4. delete features
+ // sketch feature should be skipped, only sub-features can be removed
+ // when sketch operation is active
+ std::set<FeaturePtr> anIgnoredFeatures;
+ anIgnoredFeatures.insert(mySketchMgr->activeSketch());
+ aWorkshop->deleteFeatures(aSelectedObj, anIgnoredFeatures);
+
+ // 5. stop operation
+ aWorkshop->displayer()->updateViewer();
+ aMgr->finishOperation();
-QAction* PartSet_Module::action(const QString& theId) const
-{
- if (myActions.contains(theId))
- return myActions[theId];
- return 0;
+ return true;
}
-void PartSet_Module::addAction(const QString& theId, QAction* theAction)
-{
- if (myActions.contains(theId))
- qCritical("A command with Id = '%s' already defined!", qPrintable(theId));
- theAction->setData(theId);
- connect(theAction, SIGNAL(triggered(bool)), this, SLOT(onAction(bool)));
- myActions[theId] = theAction;
-}
-void PartSet_Module::onAction(bool isChecked)
+void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
{
- QAction* aAction = static_cast<QAction*>(sender());
- QString anId = aAction->data().toString();
-
- if (anId == "DELETE_PARTSET_CMD") {
- deleteObjects();
+ Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
+ if (!anAIS.IsNull()) {
+ Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
+ if (!aDim.IsNull()) {
+ aCtx->SetZLayer(aDim, myVisualLayerId);
+ } else {
+ Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
+ if (!aCons.IsNull())
+ aCtx->SetZLayer(aCons, myVisualLayerId);
+ }
}
}
-void PartSet_Module::deleteObjects()
+void PartSet_Module::onViewTransformed(int theTrsfType)
{
- bool isSketchOp = isSketchOperationActive();
- if (!isSketchOp && !isSketchFeatureOperationActive())
+ // Set length of arrows constant in pixel size
+ // if the operation is panning or rotate or panglobal then do nothing
+ if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
return;
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_IViewer* aViewer = myWorkshop->viewer();
+ Handle(V3d_View) aView = aViewer->activeView();
- XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
- if (!isSketchOp && anOpMgr->canStopOperation()) {
- ModuleBase_Operation* aCurrentOp = anOpMgr->currentOperation();
- if (aCurrentOp) {
- aCurrentOp->abort();
- }
- }
- // sketch feature should be skipped, only sub-features can be removed
- // when sketch operation is active
- CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
-
- ModuleBase_ISelection* aSel = aConnector->selection();
- QObjectPtrList aSelectedObj = aSel->selectedPresentations();
-
- std::set<FeaturePtr> aRefFeatures;
- foreach (ObjectPtr aObj, aSelectedObj)
- {
- //ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
- //if (aPart) {
- // TODO: check for what there is this condition. It is placed here historicaly because
- // ther is this condition during remove features.
- //} else {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
- if (aFeature.get() != NULL) {
- aObj->document()->refsToFeature(aFeature, aRefFeatures, false);
- }
- //}
- }
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
- if (!aRefFeatures.empty()) {
- QStringList aRefNames;
- std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
- aLast = aRefFeatures.end();
- for (; anIt != aLast; anIt++) {
- FeaturePtr aFeature = (*anIt);
- if (aFeature == aSketch)
- continue;
- aRefNames.append((*anIt)->name().c_str());
- }
- if (!aRefNames.empty()) {
- QString aNames = aRefNames.join(", ");
-
- QMainWindow* aDesktop = aWorkshop->desktop();
- QMessageBox::StandardButton aRes = QMessageBox::warning(
- aDesktop, tr("Delete features"),
- QString(tr("Selected features are used in the following features: %1.\
- These features will be deleted also. Would you like to continue?")).arg(aNames),
- QMessageBox::No | QMessageBox::Yes, QMessageBox::No);
- if (aRes != QMessageBox::Yes)
- return;
- }
- }
+ double aLen = aView->Convert(15);
- SessionPtr aMgr = ModelAPI_Session::get();
- aMgr->startOperation("DeletePartSet");
- std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
- aLast = aRefFeatures.end();
- for (; anIt != aLast; anIt++) {
- FeaturePtr aRefFeature = (*anIt);
- if (aRefFeature == aSketch)
- continue;
- aRefFeature->document()->removeFeature(aRefFeature);
- }
+ SketcherPrs_Tools::setArrowSize(aLen);
+ bool isModified = false;
+ QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
+ foreach (AISObjectPtr aAIS, aPrsList) {
+ Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
- foreach (ObjectPtr aObj, aSelectedObj)
- {
- DocumentPtr aDoc = aObj->document();
- //ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
- //if (aPart) {
- // if (aDoc == aMgr->activeDocument()) {
- // aDoc->close();
- // }
- //} else {
- //FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
- if (aFeature.get() != NULL) {
- aDoc->removeFeature(aFeature);
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
+ if (!aDim.IsNull()) {
+ aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
+ aContext->Redisplay(aDim, false);
+ isModified = true;
}
- //}
}
- aWorkshop->displayer()->updateViewer();
- //myDisplayer->updateViewer();
- aMgr->finishOperation();
+ if (isModified)
+ aDisplayer->updateViewer();
}
