#include <PartSet_WidgetPoint2d.h>
#include <PartSet_WidgetPoint2dDistance.h>
#include <PartSet_WidgetShapeSelector.h>
+#include <PartSet_WidgetConstraintShapeSelector.h>
#include <PartSet_SketcherMgr.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_FilterFactory.h>
#include <ModuleBase_FilterLinearEdge.h>
#include <ModuleBase_FilterFace.h>
-
+#include <ModuleBase_FilterMulti.h>
+#include <ModuleBase_FilterCustom.h>
+#include <ModuleBase_FilterNoConsructionSubShapes.h>
+#include <PartSet_FilterSketchEntity.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Events.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_Session.h>
+#include <ModelAPI_ShapeValidator.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_OperationMgr.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ModuleConnector.h>
+#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Tools.h>
#include <SketchPlugin_Feature.h>
//#include <SketchPlugin_ConstraintRigid.h>
#include <Events_Loop.h>
+#include <Config_PropManager.h>
#include <StdSelect_TypeOfFace.hxx>
#include <TopoDS_Vertex.hxx>
#include <QString>
#include <QTimer>
#include <QApplication>
+#include <QMessageBox>
+#include <QMainWindow>
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomDataAPI_Dir.h>
ModuleBase_IViewer* aViewer = theWshop->viewer();
connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
+
+ createActions();
}
PartSet_Module::~PartSet_Module()
aFactory->registerValidator("PartSet_RadiusValidator", new PartSet_RadiusValidator);
aFactory->registerValidator("PartSet_RigidValidator", new PartSet_RigidValidator);
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
+ aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
+ aFactory->registerValidator("PartSet_SketchValidator", new PartSet_SketchValidator);
}
void PartSet_Module::registerFilters()
aFactory->registerFilter("EdgeFilter", new ModuleBase_FilterLinearEdge);
aFactory->registerFilter("FaceFilter", new ModuleBase_FilterFace);
+ aFactory->registerFilter("MultiFilter", new ModuleBase_FilterMulti);
+ Handle(SelectMgr_Filter) aSelectFilter = new ModuleBase_FilterNoConsructionSubShapes(workshop());
+ aFactory->registerFilter("NoConstructionSubShapesFilter",
+ new ModuleBase_FilterCustom(aSelectFilter));
+ aSelectFilter = new PartSet_FilterSketchEntity(workshop());
+ aFactory->registerFilter("SketchEntityFilter", new ModuleBase_FilterCustom(aSelectFilter));
+}
+
+void PartSet_Module::registerProperties()
+{
+ Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
+ PLANE_SIZE);
+ Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
+ Config_Prop::Integer, SKETCH_WIDTH);
}
void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
{
+ if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->commitNestedSketch(theOperation);
+ }
+
if (theOperation->isEditOperation())
return;
+ // the selection is cleared after commit the create operation
+ // in order to do not use the same selected objects in the restarted operation
+ // for common behaviour, the selection is cleared even if the operation is not restarted
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
+ if (!aContext.IsNull())
+ aContext->ClearSelected();
+
/// Restart sketcher operations automatically
FeaturePtr aFeature = theOperation->feature();
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
myRestartingMode == RM_EmptyFeatureUsed)) {
myLastOperationId = theOperation->id();
myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
+
launchOperation(myLastOperationId);
}
breakOperationSequence();
void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
- if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->startSketch(theOperation);
}
+ else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->startNestedSketch(theOperation);
+ }
+
if (myDocumentShapeFilter.IsNull())
myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
{
- if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->stopSketch(theOperation);
}
+ else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->stopNestedSketch(theOperation);
+ }
myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
}
+ModuleBase_Operation* PartSet_Module::currentOperation() const
+{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
+ return anOpMgr->currentOperation();
+}
+
+bool PartSet_Module::canUndo() const
+{
+ bool aCanUndo = false;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
+ aCanUndo = !aMgr->isOperation();
+ if (!aCanUndo) // check the enable state additionally by sketch manager
+ aCanUndo = aMgr->canUndo();
+ }
+ return aCanUndo;
+}
+
+bool PartSet_Module::canRedo() const
+{
+ bool aCanRedo = false;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
+ aCanRedo = !aMgr->isOperation();
+ if (!aCanRedo) // check the enable state additionally by sketch manager
+ aCanRedo = aMgr->canRedo();
+ }
+ return aCanRedo;
+}
+
+bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
+{
+ bool aCanDisplay = false;
+ if (!mySketchMgr->canDisplayObject())
+ return aCanDisplay;
+ CompositeFeaturePtr aSketchFeature = mySketchMgr->activeSketch();
+ if (aSketchFeature.get() != NULL) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+
+ // MPV: the second and third conditions to avoid crash on exit for application
+ if (aFeature.get() != NULL && aFeature->data().get() && aFeature->data()->isValid()) {
+ if (aFeature == aSketchFeature) {
+ aCanDisplay = false;
+ }
+ else if (aSketchFeature.get() && aSketchFeature->data().get() &&
+ aSketchFeature->data()->isValid()) {
+ for (int i = 0; i < aSketchFeature->numberOfSubs() && !aCanDisplay; i++) {
+ FeaturePtr aSubFeature = aSketchFeature->subFeature(i);
+ std::list<ResultPtr> aResults = aSubFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end() && !aCanDisplay; ++aIt) {
+ if (theObject == (*aIt))
+ aCanDisplay = true;
+ }
+ if (aSubFeature == theObject)
+ aCanDisplay = true;
+ }
+ }
+ }
+ }
+ else {
+ aCanDisplay = ModuleBase_IModule::canDisplayObject(theObject);
+ }
+ return aCanDisplay;
+}
+
+void PartSet_Module::addViewerItems(QMenu* theMenu) const
+{
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if (!PartSet_SketcherMgr::isSketchOperation(anOperation) &&
+ !PartSet_SketcherMgr::isNestedSketchOperation(anOperation))
+ return;
+
+ ModuleBase_ISelection* aSelection = myWorkshop->selection();
+ QObjectPtrList aObjects = aSelection->selectedPresentations();
+ if (aObjects.size() > 0) {
+ bool hasFeature = false;
+ foreach(ObjectPtr aObject, aObjects)
+ {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
+ if (aFeature.get() != NULL) {
+ hasFeature = true;
+ }
+ }
+ if (hasFeature) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ QAction* anAction = aWorkshop->contextMenuMgr()->action("DELETE_CMD");
+ theMenu->addAction(anAction);
+ }
+ }
+ bool isAuxiliary;
+ if (mySketchMgr->canSetAuxiliary(isAuxiliary)) {
+ QAction* anAction = action("AUXILIARY_CMD");
+ theMenu->addAction(anAction);
+ anAction->setChecked(isAuxiliary);
+ }
+}
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
- if ((theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) &&
- (theOperation->isEditOperation())) {
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
// we have to manually activate the sketch label in edit mode
aPanel->activateWidget(aPanel->modelWidgets().first());
return;
aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
aWgt->attributeID(), aPoint->x(), aPoint->y());
- theOperation->propertyPanel()->activateNextWidget(aPnt2dWgt);
+ aPanel->activateNextWidget(aPnt2dWgt);
}
}
}
} else {
// Start editing constraint
if (theOperation->isEditOperation()) {
+ // TODO: #391 - to be removed
std::string aId = theOperation->id().toStdString();
- if (PartSet_SketcherMgr::sketchOperationIdList().contains(QString(aId.c_str()))) {
- if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
- // Find and activate widget for management of point for dimension line position
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aPntWgt) {
- aPanel->activateWidget(aPntWgt);
- return;
- }
+ if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation) &&
+ PartSet_SketcherMgr::isDistanceOperation(theOperation)) {
+ // Find and activate widget for management of point for dimension line position
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
+ PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
+ if (aPntWgt) {
+ aPanel->activateWidget(aPntWgt);
+ return;
}
- }
+ }
}
}
}
void PartSet_Module::onSelectionChanged()
{
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (!aOperation)
+ return;
+
bool isSketcherOp = false;
// An edit operation is enable only if the current opeation is the sketch operation
- if (aOperation && mySketchMgr->activeSketch()) {
+ if (mySketchMgr->activeSketch()) {
if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
- isSketcherOp = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
+ isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
}
- if (!isSketcherOp)
- return;
-
- // Editing of constraints can be done on selection
- ModuleBase_ISelection* aSelect = myWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
- if (aSelected.size() == 1) {
- ModuleBase_ViewerPrs aPrs = aSelected.first();
- ObjectPtr aObject = aPrs.object();
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
- if (aFeature) {
- std::string aId = aFeature->getKind();
- if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
- editFeature(aFeature);
+ if (isSketcherOp) {
+ // Editing of constraints can be done on selection
+ ModuleBase_ISelection* aSelect = myWorkshop->selection();
+ QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
+ if (aSelected.size() == 1) {
+ ModuleBase_ViewerPrs aPrs = aSelected.first();
+ ObjectPtr aObject = aPrs.object();
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
+ if (aFeature) {
+ std::string aId = aFeature->getKind();
+ if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
+ (aId == SketchPlugin_ConstraintLength::ID()) ||
+ (aId == SketchPlugin_ConstraintDistance::ID())) {
+ editFeature(aFeature);
+ }
}
}
- }
+ }
}
- // after movement the solver will call the update event: optimization
-
void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
void PartSet_Module::onOperationActivatedByPreselection()
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (!aOperation)
- return;
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ // Set final definitions if they are necessary
+ //propertyPanelDefined(aOperation);
- // Set final definitions if they are necessary
- //propertyPanelDefined(aOperation);
-
- /// Commit sketcher operations automatically
- FeaturePtr aFeature = aOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
- aOperation->commit();
+ /// Commit sketcher operations automatically
+ anOperation->commit();
}
}
void PartSet_Module::onNoMoreWidgets()
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation) {
- /// Restart sketcher operations automatically
- FeaturePtr aFeature = aOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if (anOperation) {
+ if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
if (myRestartingMode != RM_Forbided)
myRestartingMode = RM_LastFeatureUsed;
- aOperation->commit();
+ anOperation->commit();
}
}
}
-void PartSet_Module::onVertexSelected(ObjectPtr theObject, const TopoDS_Shape& theShape)
+void PartSet_Module::onVertexSelected()
{
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
/// If last line finished on vertex the lines creation sequence has to be break
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
- if (aWidgets.last() == aPanel->activeWidget()) {
- myRestartingMode = RM_Forbided;
+ QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
+ bool aFoundWidget = false;
+ bool aFoundObligatory = false;
+ for (; anIt != aLast && !aFoundObligatory; anIt++) {
+ if (!aFoundWidget)
+ aFoundWidget = *anIt == anActiveWidget;
+ else
+ aFoundObligatory = (*anIt)->isObligatory();
}
+ if (!aFoundObligatory)
+ myRestartingMode = RM_Forbided;
}
}
-QWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
- Config_WidgetAPI* theWidgetApi, std::string theParentId,
- QList<ModuleBase_ModelWidget*>& theModelWidgets)
+ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
+ Config_WidgetAPI* theWidgetApi, std::string theParentId)
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
- PartSet_WidgetSketchLabel* aWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- connect(aWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
+ PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
+ aLabelWgt->setWorkshop(aWorkshop);
+ connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
+ aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
- PartSet_WidgetPoint2D* aWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(mySketchMgr->activeSketch());
+ PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
+ aPointWgt->setWorkshop(aWorkshop);
+ aPointWgt->setSketch(mySketchMgr->activeSketch());
+ connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
+ aWgt = aPointWgt;
+ } if (theType == "point2ddistance") {
+ PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
+ aDistanceWgt->setWorkshop(aWorkshop);
+ aDistanceWgt->setSketch(mySketchMgr->activeSketch());
+ aWgt = aDistanceWgt;
+ } if (theType == "sketch_shape_selector") {
+ PartSet_WidgetShapeSelector* aShapeSelectorWgt =
+ new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
+ aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
+ aWgt = aShapeSelectorWgt;
+ } if (theType == "sketch_constraint_shape_selector") {
+ PartSet_WidgetConstraintShapeSelector* aConstraintShapeSelectorWgt =
+ new PartSet_WidgetConstraintShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
+ aConstraintShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
+ aWgt = aConstraintShapeSelectorWgt;
+ }
+ return aWgt;
+}
+
+void PartSet_Module::createActions()
+{
+ QAction* anAction;
- connect(aWgt, SIGNAL(vertexSelected(ObjectPtr, const TopoDS_Shape&)),
- this, SLOT(onVertexSelected(ObjectPtr, const TopoDS_Shape&)));
+ anAction = new QAction(tr("Auxiliary"), this);
+ anAction->setCheckable(true);
+ addAction("AUXILIARY_CMD", anAction);
+}
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
+QAction* PartSet_Module::action(const QString& theId) const
+{
+ if (myActions.contains(theId))
+ return myActions[theId];
+ return 0;
+}
- } if (theType == "point2ddistance") {
- PartSet_WidgetPoint2dDistance* aWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(mySketchMgr->activeSketch());
+void PartSet_Module::addAction(const QString& theId, QAction* theAction)
+{
+ if (myActions.contains(theId))
+ qCritical("A command with Id = '%s' already defined!", qPrintable(theId));
+ theAction->setData(theId);
+ connect(theAction, SIGNAL(triggered(bool)), this, SLOT(onAction(bool)));
+ myActions[theId] = theAction;
+}
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
+void PartSet_Module::onAction(bool isChecked)
+{
+ QAction* aAction = static_cast<QAction*>(sender());
+ QString anId = aAction->data().toString();
- } if (theType == "sketch_shape_selector") {
- PartSet_WidgetShapeSelector* aWgt =
- new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(mySketchMgr->activeSketch());
+ if (anId == "AUXILIARY_CMD") {
+ mySketchMgr->setAuxiliary(isChecked);
+ }
+}
+
+bool PartSet_Module::deleteObjects()
+{
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
+ isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (!isSketchOp && !isNestedOp)
+ return false;
+
+ // sketch feature should be skipped, only sub-features can be removed
+ // when sketch operation is active
+ CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
+
+ // selected objects should be collected before the current operation abort because
+ // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_ISelection* aSel = aConnector->selection();
+ QObjectPtrList aSelectedObj = aSel->selectedPresentations();
+
+ // if there are no selected objects in the viewer, that means that the selection in another
+ // place cased this method. It is necessary to return the false value to understande in above
+ // method that delete is not processed
+ if (aSelectedObj.count() == 0)
+ return false;
+
+ if (isNestedOp)
+ anOperation->abort();
+
+ // the active nested sketch operation should be aborted unconditionally
+ if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation))
+ anOperation->abort();
+
+ std::set<FeaturePtr> aRefFeatures;
+ foreach (ObjectPtr aObj, aSelectedObj)
+ {
+ //ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
+ //if (aPart) {
+ // TODO: check for what there is this condition. It is placed here historicaly because
+ // ther is this condition during remove features.
+ //} else {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
+ if (aFeature.get() != NULL) {
+ aObj->document()->refsToFeature(aFeature, aRefFeatures, false);
+ }
+ //}
+ }
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
+ QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
+ /**
+ // according to #355 feature, it is not necessary to inform about dependencies during
+ // sketch delete operation
+ //
+ if (!aRefFeatures.empty()) {
+ QStringList aRefNames;
+ std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
+ aLast = aRefFeatures.end();
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aFeature = (*anIt);
+ if (aFeature == aSketch)
+ continue;
+ aRefNames.append((*anIt)->name().c_str());
+ }
+ if (!aRefNames.empty()) {
+ QString aNames = aRefNames.join(", ");
+ aDescription += aNames.prepend(" ");
+
+ QMainWindow* aDesktop = aWorkshop->desktop();
+ QMessageBox::StandardButton aRes = QMessageBox::warning(
+ aDesktop, tr("Delete features"),
+ QString(tr("Selected features are used in the following features: %1.\
+ These features will be deleted also. Would you like to continue?")).arg(aNames),
+ QMessageBox::No | QMessageBox::Yes, QMessageBox::No);
+ if (aRes != QMessageBox::Yes)
+ return;
+ }
+ }*/
- } if (theType == "sketch_constraint_shape_selector") {
- PartSet_WidgetConstraintShapeSelector* aWgt =
- new PartSet_WidgetConstraintShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(mySketchMgr->activeSketch());
+ SessionPtr aMgr = ModelAPI_Session::get();
+ aMgr->startOperation(aDescription.toStdString());
+ std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
+ aLast = aRefFeatures.end();
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aRefFeature = (*anIt);
+ if (aRefFeature == aSketch)
+ continue;
+ aRefFeature->document()->removeFeature(aRefFeature);
+ }
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
+ foreach (ObjectPtr aObj, aSelectedObj)
+ {
+ DocumentPtr aDoc = aObj->document();
+ //ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
+ //if (aPart) {
+ // if (aDoc == aMgr->activeDocument()) {
+ // aDoc->close();
+ // }
+ //} else {
+ //FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
+ if (aFeature.get() != NULL) {
+ aDoc->removeFeature(aFeature);
+ }
+ //}
+ }
+ aWorkshop->displayer()->updateViewer();
+ //myDisplayer->updateViewer();
+ aMgr->finishOperation();
- } else
- return 0;
+ return true;
}
-
