#include <ModuleBase_IViewer.h>
#include <ModuleBase_IViewWindow.h>
#include <ModuleBase_IPropertyPanel.h>
+#include <ModuleBase_ISelectionActivate.h>
#include <ModuleBase_WidgetChoice.h>
#include <ModuleBase_WidgetEditor.h>
#include <ModuleBase_WidgetValidated.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
-#include <XGUI_Displayer.h>
-#include <XGUI_Workshop.h>
-#include <XGUI_OperationMgr.h>
-#include <XGUI_PropertyPanel.h>
-#include <XGUI_ModuleConnector.h>
+#include <XGUI_ActiveControlMgr.h>
+#include <XGUI_ActiveControlSelector.h>
+#include <XGUI_ActionsMgr.h>
#include <XGUI_ContextMenuMgr.h>
-#include <XGUI_Tools.h>
-#include <XGUI_ObjectsBrowser.h>
-#include <XGUI_SelectionMgr.h>
+#include <XGUI_CustomPrs.h>
#include <XGUI_DataModel.h>
+#include <XGUI_Displayer.h>
#include <XGUI_ErrorMgr.h>
-#include <XGUI_CustomPrs.h>
+#include <XGUI_FacesPanelSelector.h>
+#include <XGUI_ModuleConnector.h>
+#include <XGUI_ObjectsBrowser.h>
+#include <XGUI_OperationMgr.h>
+#include <XGUI_PropertyPanel.h>
#include <XGUI_SelectionMgr.h>
-#include <XGUI_ActionsMgr.h>
+#include <XGUI_Tools.h>
+#include <XGUI_Workshop.h>
-#include <SketchPlugin_Feature.h>
-#include <SketchPlugin_Sketch.h>
#include <SketchPlugin_ConstraintAngle.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
+#include <SketchPlugin_Feature.h>
+#include <SketchPlugin_Projection.h>
+#include <SketchPlugin_Sketch.h>
#include <SketcherPrs_SymbolPrs.h>
#include <SketcherPrs_Coincident.h>
return new PartSet_Module(theWshop);
}
+//******************************************************
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
: ModuleBase_IModule(theWshop),
myVisualLayerId(0),
Events_Loop* aLoop = Events_Loop::loop();
aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
- mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
- mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
+ registerSelectionFilter(SF_GlobalFilter, new PartSet_GlobalFilter(myWorkshop));
+ registerSelectionFilter(SF_FilterInfinite, new PartSet_FilterInfinite(myWorkshop));
+ Handle(PartSet_ResultGroupNameFilter) aCRFilter = new PartSet_ResultGroupNameFilter(myWorkshop);
+ std::set<std::string> aCRGroupNames;
+ aCRGroupNames.insert(ModelAPI_ResultConstruction::group());
+ aCRFilter->setGroupNames(aCRGroupNames);
+ registerSelectionFilter(SF_ResultGroupNameFilter, aCRFilter);
setDefaultConstraintShown();
Config_PropManager::registerProp("Visualization", "sketch_preview_plane",
"Color of sketch plane", Config_Prop::Color,
PartSet_CustomPrs::OPERATION_SKETCH_PLANE());
+
+ Config_PropManager::registerProp("Visualization", "hidden_face_transparency",
+ "Hidden faces transparency",
+ Config_Prop::Double,
+ "0.8");
}
+//******************************************************
PartSet_Module::~PartSet_Module()
{
- SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
- for (; aIt.More(); aIt.Next()) {
- Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ std::map<XGUI_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
+ mySelectionFilters.begin();
+ for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
+ Handle(SelectMgr_Filter) aFilter = aFiltersIt->second;
if (!aFilter.IsNull())
aFilter.Nullify();
}
delete myOverconstraintListener;
}
-void PartSet_Module::activateSelectionFilters()
-{
- SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
- for (; aIt.More(); aIt.Next()) {
- Handle(SelectMgr_Filter) aFilter = aIt.Value();
- if (!aFilter.IsNull())
- myWorkshop->viewer()->addSelectionFilter(aFilter);
- }
-}
-
-void PartSet_Module::deactivateSelectionFilters()
-{
- SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
- for (; aIt.More(); aIt.Next()) {
- Handle(SelectMgr_Filter) aFilter = aIt.Value();
- if (!aFilter.IsNull())
- myWorkshop->viewer()->removeSelectionFilter(aFilter);
- }
-}
-
+//******************************************************
void PartSet_Module::storeSelection()
{
// cash is used only to restore selection, so it should be filled in storeSelection and
sketchMgr()->storeSelection(PartSet_SketcherMgr::ST_SelectType, myCurrentSelection);
}
+//******************************************************
void PartSet_Module::restoreSelection()
{
// cash is used only to restore selection, so it should be filled in storeSelection and
myCurrentSelection.clear();
}
+//******************************************************
void PartSet_Module::registerValidators()
{
//Registering of validators
aFactory->registerValidator("PartSet_ProjectionSelection", new PartSet_ProjectionSelection);
}
+//******************************************************
void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget,
const bool isToConnect)
{
mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
}
+//******************************************************
void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
{
if (sketchMgr()->isNestedSketchOperation(theOperation)) {
}
}
+//******************************************************
void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
{
/// Restart sketcher operations automatically
overconstraintListener()->setActive(false);
}
+//******************************************************
void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
}
}
+//******************************************************
void PartSet_Module::updateSketcherOnStart(ModuleBase_Operation* theOperation)
{
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
}
}
+//******************************************************
void PartSet_Module::updatePresentationsOnStart(ModuleBase_Operation* theOperation)
{
ModuleBase_OperationFeature* aFOperation =
}
}
+//******************************************************
void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
{
ModuleBase_IModule::operationResumed(theOperation);
}
}
+//******************************************************
void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
{
bool isModifiedArgs = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false);
}
}
+//******************************************************
ModuleBase_Operation* PartSet_Module::currentOperation() const
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
return anOpMgr->currentOperation();
}
+//******************************************************
bool PartSet_Module::canUndo() const
{
bool aCanUndo = false;
return aCanUndo;
}
+//******************************************************
bool PartSet_Module::canRedo() const
{
bool aCanRedo = false;
return aCanRedo;
}
+//******************************************************
bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
{
bool aValid = true;
return aValid;
}
+//******************************************************
bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
{
// the sketch manager put the restriction to the objects erase
return mySketchMgr->canEraseObject(theObject);
}
+//******************************************************
bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
{
// the sketch manager put the restriction to the objects display
return mySketchMgr->canDisplayObject(theObject);
}
+//******************************************************
bool PartSet_Module::canUsePreselection(const QString& thePreviousOperationKind,
const QString& theStartedOperationKind)
{
mySketchMgr->processHiddenObject(theObjects);
}*/
+//******************************************************
bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
{
bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
return aCanActivate;
}
+//******************************************************
bool PartSet_Module::addViewerMenu(const QMap<QString, QAction*>& theStdActions,
QWidget* theParent,
QMap<int, QAction*>& theMenuActions) const
return myMenuMgr->addViewerMenu(theStdActions, theParent, theMenuActions);
}
+//******************************************************
void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
{
myMenuMgr->updateViewerMenu(theStdActions);
}
+//******************************************************
bool PartSet_Module::isActionEnableStateFixed(const int theActionId) const
{
bool isEnabledFixed = false;
return isEnabledFixed;
}
+//******************************************************
QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
{
QString anError = ModuleBase_IModule::getFeatureError(theFeature);
return anError;
}
+//******************************************************
void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
QStringList& theIds) const
{
}
}
+//******************************************************
void PartSet_Module::activeSelectionModes(QIntList& theModes)
{
- theModes.clear();
if (mySketchMgr->activeSketch().get())
- PartSet_SketcherMgr::sketchSelectionModes(theModes);
+ PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
+ else
+ theModes = XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes();
}
-void PartSet_Module::customSubShapesSelectionModes(QIntList& theTypes)
+//******************************************************
+void PartSet_Module::moduleSelectionModes(int theModesType, QIntList& theModes)
{
- if (theTypes.contains(TopAbs_FACE))
- theTypes.append(SketcherPrs_Tools::Sel_Sketch_Face);
- if (theTypes.contains(TopAbs_WIRE))
- theTypes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
+ customSubShapesSelectionModes(theModes);
+ //theModes.append(XGUI_Tools::workshop(myWorkshop)->viewerSelectionModes());
+ //myWorkshop->module()->activeSelectionModes(theModes);
}
+//******************************************************
+void PartSet_Module::moduleSelectionFilters(const QIntList& theFilterTypes,
+ SelectMgr_ListOfFilter& theSelectionFilters)
+{
+ bool isSketchActive = mySketchMgr->activeSketch().get();
+
+ std::map<XGUI_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
+ mySelectionFilters.begin();
+ for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++) {
+ int aFilterType = aFiltersIt->first;
+ // do not add not participating filters in given parameters
+ if (!theFilterTypes.contains(aFilterType))
+ continue;
+
+ // using sketch filters only if sketch operation is active
+ if (!isSketchActive &&
+ mySketchMgr->sketchSelectionFilter((XGUI_SelectionFilterType)aFilterType))
+ continue;
+
+ // using filtering of construction results only from faces panel
+ if (aFilterType == SF_ResultGroupNameFilter)
+ continue;
+
+ theSelectionFilters.Append(aFiltersIt->second);
+ }
+}
+
+//******************************************************
+QIntList PartSet_Module::selectionFilters()
+{
+ QIntList aTypes;
+
+ std::map<XGUI_SelectionFilterType, Handle(SelectMgr_Filter)>::const_iterator aFiltersIt =
+ mySelectionFilters.begin();
+ for (; aFiltersIt != mySelectionFilters.end(); aFiltersIt++)
+ aTypes.append(aFiltersIt->first);
+
+ return aTypes;
+}
+
+//******************************************************
+void PartSet_Module::registerSelectionFilter(const XGUI_SelectionFilterType theFilterType,
+ const Handle(SelectMgr_Filter)& theFilter)
+{
+ mySelectionFilters[theFilterType] = theFilter;
+}
+
+//******************************************************
+Handle(SelectMgr_Filter) PartSet_Module::selectionFilter(const int theType)
+{
+ XGUI_SelectionFilterType aType = (XGUI_SelectionFilterType)theType;
+
+ if (mySelectionFilters.find(aType) != mySelectionFilters.end())
+ return mySelectionFilters[aType];
+ else
+ return Handle(SelectMgr_Filter)();
+}
+
+//******************************************************
+void PartSet_Module::customSubShapesSelectionModes(QIntList& theModes)
+{
+ if (theModes.contains(TopAbs_FACE))
+ theModes.append(SketcherPrs_Tools::Sel_Sketch_Face);
+ if (theModes.contains(TopAbs_WIRE))
+ theModes.append(SketcherPrs_Tools::Sel_Sketch_Wire);
+
+ if (mySketchMgr->activeSketch().get())
+ PartSet_SketcherMgr::sketchSelectionModes(mySketchMgr->activeSketch(), theModes);
+}
+
+//******************************************************
void PartSet_Module::getGeomSelection(const std::shared_ptr<ModuleBase_ViewerPrs>& theSelected,
ObjectPtr& theObject, AttributePtr& theAttribute)
{
theObject = anObject;
}
+//******************************************************
bool PartSet_Module::isMouseOverWindow()
{
return mySketchMgr->isMouseOverWindow();
}
+//******************************************************
bool PartSet_Module::isSketchNeutralPointActivated() const
{
bool isNeutralPoint = true;
return isNeutralPoint;
}
+//******************************************************
void PartSet_Module::closeDocument()
{
myActivePartIndex = QModelIndex();
- clearViewer();
}
+//******************************************************
void PartSet_Module::clearViewer()
{
myCustomPrs->clearPrs();
XGUI_Workshop* aWorkshop = getWorkshop();
XGUI_Displayer* aDisplayer = aWorkshop->displayer();
- aDisplayer->deactivateSelectionFilters();
+ aDisplayer->deactivateSelectionFilters(false);
}
+//******************************************************
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
ModuleBase_OperationFeature* aFOperation =
aPanel->activateWidget(aPanel->modelWidgets().first());
}
+//******************************************************
bool PartSet_Module::createWidgets(ModuleBase_Operation* theOperation,
QList<ModuleBase_ModelWidget*>& theWidgets) const
{
return aProcessed;
}
+//******************************************************
void PartSet_Module::onSelectionChanged()
{
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
}
}
+//******************************************************
void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
}
+//******************************************************
ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType,
QWidget* theParent,
Config_WidgetAPI* theWidgetApi)
return aWgt;
}
+//******************************************************
ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
{
ModuleBase_ModelWidget* anActiveWidget = 0;
return anActiveWidget;
}
+//******************************************************
bool PartSet_Module::deleteObjects()
{
bool isProcessed = false;
return isProcessed;
}
+//******************************************************
void PartSet_Module::editFeature(FeaturePtr theFeature)
{
storeConstraintsState(theFeature->getKind());
ModuleBase_IModule::editFeature(theFeature);
}
+//******************************************************
bool PartSet_Module::canCommitOperation() const
{
return true;
}
+//******************************************************
void PartSet_Module::launchOperation(const QString& theCmdId, const bool& isStartAfterCommitOnly)
{
myIsOperationIsLaunched = true;
myIsOperationIsLaunched = false;
}
+//******************************************************
void PartSet_Module::storeConstraintsState(const std::string& theFeatureKind)
{
if (myWorkshop->currentOperation() &&
}
}
+//******************************************************
void PartSet_Module::updateConstraintsState(const std::string& theFeatureKind)
{
if (PartSet_SketcherMgr::constraintsIdList().contains(theFeatureKind.c_str()) ||
}
}
+//******************************************************
void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
{
Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
if (!anAIS.IsNull()) {
+ bool aToUseZLayer = false;
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature.get() && PartSet_Tools::findRefsToMeFeature(aFeature,
+ SketchPlugin_Projection::ID()))
+ aToUseZLayer = true;
Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
if (!aDim.IsNull()) {
- aCtx->SetZLayer(aDim, myVisualLayerId);
+ aToUseZLayer = true;
} else {
Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
if (!aCons.IsNull())
- aCtx->SetZLayer(aCons, myVisualLayerId);
+ aToUseZLayer = true;
}
+ if (aToUseZLayer)
+ aCtx->SetZLayer(anAIS, myVisualLayerId);
}
}
+//******************************************************
void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
{
// this is obsolete
// myCustomPrs->redisplay(theObject, false);
}
+//******************************************************
void PartSet_Module::onViewTransformed(int theTrsfType)
{
// Set length of arrows constant in pixel size
SketcherPrs_Tools::setArrowSize(aLen);
const double aCurScale = aViewer->activeView()->Camera()->Scale();
aViewer->SetScale(aViewer->activeView(), aCurScale);
- double aTextHeight = SketcherPrs_Tools::getConfigTextHeight();
- SketcherPrs_Tools::setTextHeight (aTextHeight);
bool isModified = false;
QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
foreach (AISObjectPtr aAIS, aPrsList) {
Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
if (!aDim.IsNull()) {
aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
- aDim->DimensionAspect()->TextAspect()->SetHeight(aTextHeight);
aContext->Redisplay(aDim, false);
isModified = true;
}
}
}
+//******************************************************
bool PartSet_Module::isCustomPrsActivated(const ModuleBase_CustomizeFlag& theFlag) const
{
return myCustomPrs->isActive(theFlag);
}
+//******************************************************
void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature,
const ModuleBase_CustomizeFlag& theFlag,
const bool theUpdateViewer)
myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
}
+//******************************************************
void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
const bool theUpdateViewer)
{
myCustomPrs->deactivate(theFlag, theUpdateViewer);
}
+//******************************************************
bool PartSet_Module::customisePresentation(ResultPtr theResult, AISObjectPtr thePrs,
std::shared_ptr<GeomAPI_ICustomPrs> theCustomPrs)
{
return aCustomized;
}
+//******************************************************
bool PartSet_Module::afterCustomisePresentation(std::shared_ptr<ModelAPI_Result> theResult,
AISObjectPtr thePrs,
GeomCustomPrsPtr theCustomPrs)
return aCustomized;
}
+//******************************************************
bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
const bool theUpdateViewer)
{
return isRedisplayed;
}
+//******************************************************
void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
{
XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
}
}
+//******************************************************
void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
{
SessionPtr aMgr = ModelAPI_Session::get();
aMenu.exec(aHeader->mapToGlobal(thePnt));
}
+//******************************************************
Handle(AIS_InteractiveObject) PartSet_Module::createPresentation(const ResultPtr& theResult)
{
return mySketchMgr->createPresentation(theResult);
}
-
+//******************************************************
ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
{
ObjectPtr anObject;
return anObject;
}
+//******************************************************
bool PartSet_Module::canBeShaded(Handle(AIS_InteractiveObject) theAIS) const
{
bool aCanBeShaged = true;
return aCanBeShaged;
}
+//******************************************************
void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
{
QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
bool hasParameter = false;
bool hasCompositeOwner = false;
bool hasResultInHistory = false;
+ bool hasFolder = false;
ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter,
- hasCompositeOwner, hasResultInHistory);
+ hasCompositeOwner, hasResultInHistory, hasFolder);
ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
if (aSelected == 1) {
}
}
+//******************************************************
#define EXPAND_PARENT(OBJ) \
QModelIndex aObjIndex = aDataModel->objectIndex(OBJ); \
if (aObjIndex.isValid()) { \
aTreeView->setExpanded(aParent, true); \
}
-
+//******************************************************
void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
{
if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
SessionPtr aMgr = ModelAPI_Session::get();
DocumentPtr aActiveDoc = aMgr->activeDocument();
- if (myActivePartIndex.isValid())
- aTreeView->setExpanded(myActivePartIndex, false);
+ // workaround for #2431 (SISGSEGV when launching some unit tests from GUI)
+ //if (myActivePartIndex.isValid())
+ // aTreeView->setExpanded(myActivePartIndex, false);
XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
myActivePartIndex = aDataModel->documentRootIndex(aActiveDoc, 0);
}
}
+//******************************************************
void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
{
if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
}
}
-
+//******************************************************
void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
{
// z layer is created for all started operations in order to visualize operation AIS presentation
}
// if there is an active operation with validated widget,
// the filters of this widget should be activated in the created view
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation) {
- ModuleBase_ModelWidget* anActiveWidget = activeWidget();
- if (anActiveWidget) {
- ModuleBase_WidgetSelector* aWSelector =
- dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
- if (aWSelector)
- aWSelector->activateSelectionAndFilters(true);
- }
- }
+ myWorkshop->selectionActivate()->updateSelectionFilters();
+ myWorkshop->selectionActivate()->updateSelectionModes();
}
//******************************************************
mySketchMgr->widgetStateChanged(thePreviousState);
}
+//******************************************************
bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
{
return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
