// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
#include "PartSet_Module.h"
-#include <PartSet_WidgetSketchLabel.h>
-#include <PartSet_Validators.h>
-#include <PartSet_Tools.h>
-#include <PartSet_WidgetPoint2d.h>
-#include <PartSet_WidgetPoint2dDistance.h>
-#include <PartSet_WidgetShapeSelector.h>
+#include "PartSet_WidgetSketchLabel.h"
+#include "PartSet_Validators.h"
+#include "PartSet_Tools.h"
+#include "PartSet_WidgetPoint2d.h"
+#include "PartSet_WidgetPoint2dDistance.h"
+#include "PartSet_WidgetShapeSelector.h"
+#include "PartSet_WidgetPoint2dAngle.h"
+#include "PartSet_WidgetMultiSelector.h"
+#include "PartSet_WidgetEditor.h"
+#include "PartSet_WidgetFileSelector.h"
+#include "PartSet_WidgetSketchCreator.h"
+#include "PartSet_SketcherMgr.h"
+#include "PartSet_MenuMgr.h"
+#include "PartSet_CustomPrs.h"
+#include "PartSet_IconFactory.h"
+
+#include "PartSet_Filters.h"
+#include "PartSet_FilterInfinite.h"
+
+#include <PartSetPlugin_Remove.h>
+#include <PartSetPlugin_Part.h>
+#include <PartSetPlugin_Duplicate.h>
#include <ModuleBase_Operation.h>
+#include <ModuleBase_OperationAction.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IViewWindow.h>
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_WidgetEditor.h>
+#include <ModuleBase_WidgetValidated.h>
#include <ModuleBase_FilterFactory.h>
-#include <ModuleBase_FilterLinearEdge.h>
+#include <ModuleBase_Tools.h>
+#include <ModuleBase_OperationFeature.h>
+
+#include <GeomValidators_ShapeType.h>
+#include <GeomValidators_Finite.h>
+#include <GeomValidators_Face.h>
+#include <GeomValidators_ConstructionComposite.h>
+#include <GeomValidators_ZeroOffset.h>
+#include <GeomValidators_BooleanArguments.h>
+#include <GeomValidators_Different.h>
+#include <GeomValidators_PartitionArguments.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_Session.h>
+#include <GeomValidators_DifferentShapes.h>
+#include <ModelAPI_ResultBody.h>
+#include <ModelAPI_AttributeString.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_OperationMgr.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ModuleConnector.h>
+#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Tools.h>
+#include <XGUI_ObjectsBrowser.h>
+#include <XGUI_SelectionMgr.h>
+#include <XGUI_DataModel.h>
+#include <XGUI_ErrorMgr.h>
-#include <SketchPlugin_Line.h>
+#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
-#include <SketchPlugin_Point.h>
+#include <SketchPlugin_Line.h>
#include <SketchPlugin_Arc.h>
#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_Point.h>
+#include <SketchPlugin_ConstraintAngle.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
-#include <SketchPlugin_ConstraintRigid.h>
+
+#include <SketcherPrs_SymbolPrs.h>
+#include <SketcherPrs_Tools.h>
#include <Events_Loop.h>
+#include <Config_PropManager.h>
+#include <Config_Keywords.h>
#include <StdSelect_TypeOfFace.hxx>
#include <TopoDS_Vertex.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Shape.hxx>
#include <BRep_Tool.hxx>
+#include <AIS_Dimension.hxx>
#include <QObject>
#include <QMouseEvent>
#include <QString>
#include <QTimer>
#include <QApplication>
+#include <QMessageBox>
+#include <QMainWindow>
+#include <QLineEdit>
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomDataAPI_Dir.h>
+#include <SelectMgr_ListIteratorOfListOfFilter.hxx>
+
#ifdef _DEBUG
#include <QDebug>
#endif
-
-/// Returns list of unique objects by sum of objects from List1 and List2
-QList<ObjectPtr> getSumList(const QList<ModuleBase_ViewerPrs>& theList1,
- const QList<ModuleBase_ViewerPrs>& theList2)
-{
- QList<ObjectPtr> aRes;
- foreach (ModuleBase_ViewerPrs aPrs, theList1) {
- if (!aRes.contains(aPrs.object()))
- aRes.append(aPrs.object());
- }
- foreach (ModuleBase_ViewerPrs aPrs, theList2) {
- if (!aRes.contains(aPrs.object()))
- aRes.append(aPrs.object());
- }
- return aRes;
-}
-
/*!Create and return new instance of XGUI_Module*/
extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
{
}
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
- : ModuleBase_IModule(theWshop),
- myIsDragging(false), myRestartingMode(RM_None), myDragDone(false)
+ : ModuleBase_IModule(theWshop),
+ myRestartingMode(RM_None), myVisualLayerId(0), myHasConstraintShown(true)
{
- //myWorkshop = dynamic_cast<XGUI_Workshop*>(theWshop);
- ModuleBase_IViewer* aViewer = aViewer = theWshop->viewer();
- connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
-
- connect(aViewer, SIGNAL(mouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMouseReleased(ModuleBase_IViewWindow*, QMouseEvent*)));
-
- connect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMouseMoved(ModuleBase_IViewWindow*, QMouseEvent*)));
+ new PartSet_IconFactory();
- connect(aViewer, SIGNAL(mouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMouseDoubleClick(ModuleBase_IViewWindow*, QMouseEvent*)));
+ mySketchMgr = new PartSet_SketcherMgr(this);
+#ifdef ModuleDataModel
+ myDataModel = new PartSet_DocumentDataModel(this);
+#endif
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
this, SLOT(onOperationActivatedByPreselection()));
+ ModuleBase_IViewer* aViewer = theWshop->viewer();
connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
+ connect(aViewer, SIGNAL(viewTransformed(int)),
+ SLOT(onViewTransformed(int)));
+ connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
+ SLOT(onViewCreated(ModuleBase_IViewWindow*)));
+
+ myMenuMgr = new PartSet_MenuMgr(this);
+ myCustomPrs = new PartSet_CustomPrs(theWshop);
+
+ Events_Loop* aLoop = Events_Loop::loop();
+ aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
+
+ mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
+ mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
}
PartSet_Module::~PartSet_Module()
{
- if (!myDocumentShapeFilter.IsNull())
- myDocumentShapeFilter.Nullify();
- if (!myPlaneFilter.IsNull())
- myPlaneFilter.Nullify();
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ aFilter.Nullify();
+ }
+ delete myCustomPrs;
+}
+
+void PartSet_Module::activateSelectionFilters()
+{
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ myWorkshop->viewer()->addSelectionFilter(aFilter);
+ }
+}
+
+void PartSet_Module::deactivateSelectionFilters()
+{
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ myWorkshop->viewer()->removeSelectionFilter(aFilter);
+ }
}
void PartSet_Module::registerValidators()
//Registering of validators
SessionPtr aMgr = ModelAPI_Session::get();
ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
- aFactory->registerValidator("PartSet_DistanceValidator", new PartSet_DistanceValidator);
- aFactory->registerValidator("PartSet_LengthValidator", new PartSet_LengthValidator);
- aFactory->registerValidator("PartSet_PerpendicularValidator", new PartSet_PerpendicularValidator);
- aFactory->registerValidator("PartSet_ParallelValidator", new PartSet_ParallelValidator);
- aFactory->registerValidator("PartSet_RadiusValidator", new PartSet_RadiusValidator);
- aFactory->registerValidator("PartSet_RigidValidator", new PartSet_RigidValidator);
+ aFactory->registerValidator("PartSet_DistanceSelection", new PartSet_DistanceSelection);
+ aFactory->registerValidator("PartSet_LengthSelection", new PartSet_LengthSelection);
+ aFactory->registerValidator("PartSet_PerpendicularSelection", new PartSet_PerpendicularSelection);
+ aFactory->registerValidator("PartSet_ParallelSelection", new PartSet_ParallelSelection);
+ aFactory->registerValidator("PartSet_RadiusSelection", new PartSet_RadiusSelection);
+ aFactory->registerValidator("PartSet_RigidSelection", new PartSet_RigidSelection);
+ aFactory->registerValidator("PartSet_CoincidentSelection", new PartSet_CoincidentSelection);
+ aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
+ aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
+ aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
+ aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
+ aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
+
+ aFactory->registerValidator("GeomValidators_DifferentShapes", new GeomValidators_DifferentShapes);
+ aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
+ aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
+ aFactory->registerValidator("GeomValidators_Finite", new GeomValidators_Finite);
+
+ aFactory->registerValidator("GeomValidators_ConstructionComposite",
+ new GeomValidators_ConstructionComposite);
+
+ aFactory->registerValidator("GeomValidators_ZeroOffset",
+ new GeomValidators_ZeroOffset);
+
+ aFactory->registerValidator("GeomValidators_BooleanArguments",
+ new GeomValidators_BooleanArguments);
+
+ aFactory->registerValidator("PartSet_SketchEntityValidator",
+ new PartSet_SketchEntityValidator);
+
+ aFactory->registerValidator("GeomValidators_Different",
+ new GeomValidators_Different);
+
+ aFactory->registerValidator("GeomValidators_PartitionArguments",
+ new GeomValidators_PartitionArguments);
}
void PartSet_Module::registerFilters()
//Registering of selection filters
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
+}
- aFactory->registerFilter("LinearEdgeFilter", new ModuleBase_FilterLinearEdge);
+void PartSet_Module::registerProperties()
+{
+ Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
+ PLANE_SIZE);
+ Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
+ Config_Prop::Integer, SKETCH_WIDTH);
}
-void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
{
- if (theOperation->isEditOperation())
+ if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->commitNestedSketch(theOperation);
+ }
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (!aFOperation || aFOperation->isEditOperation())
return;
+ // the selection is cleared after commit the create operation
+ // in order to do not use the same selected objects in the restarted operation
+ // for common behaviour, the selection is cleared even if the operation is not restarted
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ aWorkshop->selector()->clearSelection();
+
/// Restart sketcher operations automatically
- FeaturePtr aFeature = theOperation->feature();
+ FeaturePtr aFeature = aFOperation->feature();
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
myRestartingMode == RM_EmptyFeatureUsed)) {
- myLastOperationId = theOperation->id();
- myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
- launchOperation(myLastOperationId);
+ myLastOperationId = aFOperation->id();
+ myLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature() : FeaturePtr();
+ if (!sketchMgr()->sketchSolverError())
+ launchOperation(myLastOperationId);
}
breakOperationSequence();
}
myRestartingMode = RM_None;
}
-void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
{
breakOperationSequence();
}
-void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
{
- if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
- // Display all sketcher sub-Objects
- myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(theOperation->feature());
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
+ mySketchMgr->startSketch(theOperation);
+ }
+ else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->startNestedSketch(theOperation);
+ }
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (aFOperation)
+ myCustomPrs->activate(aFOperation->feature(), true);
+}
+
+void PartSet_Module::onOperationResumed(ModuleBase_Operation* theOperation)
+{
+ ModuleBase_IModule::onOperationResumed(theOperation);
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (aFOperation)
+ myCustomPrs->activate(aFOperation->feature(), true);
+}
+
+void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
+{
+ bool isModified = myCustomPrs->deactivate(false);
+
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
+ mySketchMgr->stopSketch(theOperation);
+ }
+ else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+ mySketchMgr->stopNestedSketch(theOperation);
+ }
+
+ if (isModified) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ aDisplayer->updateViewer();
+ }
+ mySketchMgr->onShowConstraintsToggle(myHasConstraintShown);
+}
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);
- std::list<ResultPtr> aResults = aFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->display((*aIt), false);
- }
- aDisplayer->display(aFeature);
- }
- // Hide sketcher result
- std::list<ResultPtr> aResults = myCurrentSketch->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->erase((*aIt), false);
- }
- aDisplayer->erase(myCurrentSketch);
+ModuleBase_Operation* PartSet_Module::currentOperation() const
+{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
+ return anOpMgr->currentOperation();
+}
+bool PartSet_Module::canUndo() const
+{
+ bool aCanUndo = false;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (aMgr->hasModuleDocument() && aMgr->canUndo()) {
+ aCanUndo = !aMgr->isOperation();
+ if (!aCanUndo) // check the enable state additionally by sketch manager
+ aCanUndo = aMgr->canUndo();
+ }
+ return aCanUndo;
+}
- if (myPlaneFilter.IsNull())
- myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
- myWorkshop->viewer()->addSelectionFilter(myPlaneFilter);
- if (theOperation->isEditOperation()) {
- // If it is editing of sketch then it means that plane is already defined
- std::shared_ptr<GeomAPI_Pln> aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
- myPlaneFilter->setPlane(aPln->impl<gp_Pln>());
- }
+bool PartSet_Module::canRedo() const
+{
+ bool aCanRedo = false;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (aMgr->hasModuleDocument() && aMgr->canRedo()) {
+ aCanRedo = !aMgr->isOperation();
+ if (!aCanRedo) // check the enable state additionally by sketch manager
+ aCanRedo = aMgr->canRedo();
}
- if (myDocumentShapeFilter.IsNull())
- myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
- myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
+ return aCanRedo;
}
-void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
+bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
{
- if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
- DataPtr aData = myCurrentSketch->data();
- if ((!aData) || (!aData->isValid())) {
- // The sketch was aborted
- myCurrentSketch = CompositeFeaturePtr();
- return;
+ bool aValid = true;
+ if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature) {
+ // part features are removed in the PartSet module only.
+ if (aFeature->getKind() == PartSetPlugin_Part::ID())
+ aValid = false;
}
- // Hide all sketcher sub-Objects
+ }
+ return aValid;
+}
+
+bool PartSet_Module::canCommitOperation() const
+{
+ return mySketchMgr->canCommitOperation();
+}
+
+bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
+{
+ // the sketch manager put the restriction to the objects erase
+ return mySketchMgr->canEraseObject(theObject);
+}
+
+bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
+{
+ // the sketch manager put the restriction to the objects display
+ return mySketchMgr->canDisplayObject(theObject);
+}
+
+bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
+{
+ bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
+
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
+ isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (isSketchOp || isNestedOp) {
+ // in active sketch operation it is possible to activate operation object in selection
+ // in the edit operation, e.g. points of the line can be moved when the line is edited
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
+ aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
+ }
+ return aCanActivate;
+}
+
+bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
+{
+ return myMenuMgr->addViewerMenu(theMenu, theStdActions);
+}
+
+void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
+{
+ myMenuMgr->updateViewerMenu(theStdActions);
+}
+
+QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
+{
+ QString anError = ModuleBase_IModule::getFeatureError(theFeature);
+
+ if (anError.isEmpty())
+ anError = sketchMgr()->getFeatureError(theFeature);
+
+ if (anError.isEmpty()) {
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);
- std::list<ResultPtr> aResults = aFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->erase((*aIt), false);
- }
- aDisplayer->erase(aFeature, false);
- }
- // Display sketcher result
- std::list<ResultPtr> aResults = myCurrentSketch->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->display((*aIt), false);
- }
- aDisplayer->display(myCurrentSketch);
+ XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
- myCurrentSketch = CompositeFeaturePtr();
- myWorkshop->viewer()->removeSelectionFilter(myPlaneFilter);
+ if (anOpMgr->isValidationLocked()) {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
+ (anOpMgr->currentOperation());
+ if (!aFOperation || theFeature == aFOperation->feature())
+ anError = "Validation is locked by the current operation";
+ }
}
- myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
+ return anError;
}
-void PartSet_Module::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
+void PartSet_Module::activeSelectionModes(QIntList& theModes)
{
- myPlaneFilter->setPlane(thePln->impl<gp_Pln>());
+ theModes.clear();
+ if (mySketchMgr->activeSketch().get())
+ PartSet_SketcherMgr::sketchSelectionModes(theModes);
}
+bool PartSet_Module::isMouseOverWindow()
+{
+ return mySketchMgr->isMouseOverWindow();
+}
+
+void PartSet_Module::closeDocument()
+{
+ clearViewer();
+}
+
+void PartSet_Module::clearViewer()
+{
+ myCustomPrs->clearPrs();
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ aDisplayer->deactivateSelectionFilters();
+}
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
- ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
- if ((theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) &&
- (theOperation->isEditOperation())) {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (!aFOperation)
+ return;
+
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation())) {
// we have to manually activate the sketch label in edit mode
aPanel->activateWidget(aPanel->modelWidgets().first());
return;
}
// Restart last operation type
- if ((theOperation->id() == myLastOperationId) && myLastFeature) {
+ if ((aFOperation->id() == myLastOperationId) && myLastFeature) {
ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
- if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
+ if (aFOperation->id().toStdString() == SketchPlugin_Line::ID()) {
// Initialise new line with first point equal to end of previous
PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
if (aPnt2dWgt) {
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
if (aPoint) {
aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
- PartSet_Tools::setConstraints(myCurrentSketch, theOperation->feature(),
+ PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), aFOperation->feature(),
aWgt->attributeID(), aPoint->x(), aPoint->y());
- theOperation->propertyPanel()->activateNextWidget(aPnt2dWgt);
+ aPanel->activateNextWidget(aPnt2dWgt);
}
}
}
- } else {
- // Start editing constraint
- if (theOperation->isEditOperation()) {
- std::string aId = theOperation->id().toStdString();
- if (sketchOperationIdList().contains(QString(aId.c_str()))) {
- if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
- // Find and activate widget for management of point for dimension line position
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aPntWgt) {
- aPanel->activateWidget(aPntWgt);
- return;
- }
- }
- }
- }
- }
}
}
void PartSet_Module::onSelectionChanged()
{
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (!aOperation)
+ return;
+
bool isSketcherOp = false;
// An edit operation is enable only if the current opeation is the sketch operation
- if (aOperation && myCurrentSketch) {
- if (PartSet_Tools::sketchPlane(myCurrentSketch))
- isSketcherOp = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
+ if (mySketchMgr->activeSketch()) {
+ if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
+ isSketcherOp = PartSet_SketcherMgr::isSketchOperation(aOperation);
}
- if (!isSketcherOp)
- return;
-
- // Editing of constraints can be done on selection
- ModuleBase_ISelection* aSelect = myWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
- if (aSelected.size() == 1) {
- ModuleBase_ViewerPrs aPrs = aSelected.first();
- ObjectPtr aObject = aPrs.object();
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
- if (aFeature) {
- std::string aId = aFeature->getKind();
- if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
- editFeature(aFeature);
+ if (isSketcherOp) {
+ // Editing of constraints can be done on selection
+ ModuleBase_ISelection* aSelect = myWorkshop->selection();
+ QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
+ if (aSelected.size() == 1) {
+ ModuleBase_ViewerPrs aPrs = aSelected.first();
+ ObjectPtr aObject = aPrs.object();
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
+ if (aFeature) {
+ std::string aId = aFeature->getKind();
+ if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
+ (aId == SketchPlugin_ConstraintLength::ID()) ||
+ (aId == SketchPlugin_ConstraintDistance::ID()) ||
+ (aId == SketchPlugin_ConstraintAngle::ID())) {
+ editFeature(aFeature);
+ }
}
}
- }
+ }
}
-void PartSet_Module::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
{
- if (!(theEvent->buttons() & Qt::LeftButton))
- return;
-
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- // Use only for sketch operations
- if (aOperation && myCurrentSketch) {
- if (!PartSet_Tools::sketchPlane(myCurrentSketch))
- return;
-
- bool isSketcher = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
- bool isSketchOpe = sketchOperationIdList().contains(aOperation->id());
-
- // Avoid non-sketch operations
- if ((!isSketchOpe) && (!isSketcher))
- return;
-
- bool isEditing = aOperation->isEditOperation();
-
- // Ignore creation sketch operation
- if ((!isSketcher) && (!isEditing))
- return;
-
- if (theEvent->modifiers()) {
- // If user performs multiselection
- if (isSketchOpe && (!isSketcher))
- if (!aOperation->commit())
- aOperation->abort();
- return;
- }
- // Remember highlighted objects for editing
- ModuleBase_ISelection* aSelect = myWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aHighlighted = aSelect->getHighlighted();
- QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
- myEditingFeatures.clear();
- myEditingAttr.clear();
- if ((aHighlighted.size() == 0) && (aSelected.size() == 0)) {
- if (isSketchOpe && (!isSketcher))
- // commit previous operation
- if (!aOperation->commit())
- aOperation->abort();
- return;
- }
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
+ anOpMgr->onKeyReleased(theEvent);
+}
- QObjectPtrList aSelObjects = getSumList(aHighlighted, aSelected);
- if ((aHighlighted.size() == 1) && (aSelected.size() == 0)) {
- // Move by selected shape (vertex). Can be used only for single selection
- foreach(ModuleBase_ViewerPrs aPrs, aHighlighted) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aHighlighted.first().object());
- if (aFeature) {
- myEditingFeatures.append(aFeature);
- TopoDS_Shape aShape = aPrs.shape();
- if (!aShape.IsNull()) {
- if (aShape.ShapeType() == TopAbs_VERTEX) {
- AttributePtr aAttr = PartSet_Tools::findAttributeBy2dPoint(myEditingFeatures.first(),
- aShape, myCurrentSketch);
- if (aAttr)
- myEditingAttr.append(aAttr);
- }
- }
- }
- }
- } else {
- // Provide multi-selection. Can be used only for features
- foreach (ObjectPtr aObj, aSelObjects) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
- if (aFeature && (!myEditingFeatures.contains(aFeature)))
- myEditingFeatures.append(aFeature);
- }
+void PartSet_Module::onEnterReleased()
+{
+ myRestartingMode = RM_EmptyFeatureUsed;
+}
- }
- // If nothing highlighted - return
- if (myEditingFeatures.size() == 0)
- return;
+void PartSet_Module::onOperationActivatedByPreselection()
+{
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ // Set final definitions if they are necessary
+ //propertyPanelDefined(aOperation);
- if (isSketcher) {
- myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurX, myCurY);
- myDragDone = false;
- myWorkshop->viewer()->enableSelection(false);
- launchEditing();
-
- } else if (isSketchOpe && isEditing) {
- // If selected another object
- aOperation->abort();
-
- myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurX, myCurY);
- myDragDone = false;
- myWorkshop->viewer()->enableSelection(false);
-
- // This is necessary in order to finalize previous operation
- QApplication::processEvents();
- launchEditing();
- }
+ /// Commit sketcher operations automatically
+ anOperation->commit();
}
}
-
-void PartSet_Module::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
- double& theX, double& theY)
+void PartSet_Module::onNoMoreWidgets()
{
- Handle(V3d_View) aView = theWnd->v3dView();
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, theX, theY);
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if (anOperation) {
+ if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ if (myRestartingMode != RM_Forbided)
+ myRestartingMode = RM_LastFeatureUsed;
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
+ // do nothing if the feature can not be applyed
+ if (anOpMgr->isApplyEnabled())
+ anOperation->commit();
+ }
+ }
}
-
-void PartSet_Module::launchEditing()
+void PartSet_Module::onVertexSelected()
{
- if (myEditingFeatures.size() > 0) {
- FeaturePtr aFeature = myEditingFeatures.first();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
- editFeature(aSPFeature);
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
+ /// If last line finished on vertex the lines creation sequence has to be break
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
+ QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
+ bool aFoundWidget = false;
+ bool aFoundObligatory = false;
+ for (; anIt != aLast && !aFoundObligatory; anIt++) {
+ if (!aFoundWidget)
+ aFoundWidget = *anIt == anActiveWidget;
+ else
+ aFoundObligatory = (*anIt)->isObligatory();
}
+ if (!aFoundObligatory)
+ myRestartingMode = RM_Forbided;
}
}
-void PartSet_Module::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
+ Config_WidgetAPI* theWidgetApi, std::string theParentId)
{
- myWorkshop->viewer()->enableSelection(true);
- if (myIsDragging) {
- myIsDragging = false;
- if (myDragDone) {
- myWorkshop->currentOperation()->commit();
- myEditingFeatures.clear();
- myEditingAttr.clear();
- }
+ ModuleBase_IWorkshop* aWorkshop = workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
+ ModuleBase_ModelWidget* aWgt = NULL;
+ if (theType == "sketch-start-label") {
+ PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
+ theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
+ connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
+ mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
+ connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
+ mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
+ aWgt = aLabelWgt;
+ } else if (theType == "sketch-2dpoint_selector") {
+ PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
+ theWidgetApi, theParentId);
+ aPointWgt->setSketch(mySketchMgr->activeSketch());
+ connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
+ aWgt = aPointWgt;
+ } else if (theType == "point2ddistance") {
+ PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
+ aWorkshop, theWidgetApi, theParentId);
+ aDistanceWgt->setSketch(mySketchMgr->activeSketch());
+ aWgt = aDistanceWgt;
+ } else if(theType == "point2dangle") {
+ PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
+ aWorkshop, theWidgetApi, theParentId);
+ anAngleWgt->setSketch(mySketchMgr->activeSketch());
+ aWgt = anAngleWgt;
+ } else if (theType == "sketch_shape_selector") {
+ PartSet_WidgetShapeSelector* aShapeSelectorWgt =
+ new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
+ aWgt = aShapeSelectorWgt;
+ } else if (theType == "sketch_multi_selector") {
+ PartSet_WidgetMultiSelector* aShapeSelectorWgt =
+ new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
+ aWgt = aShapeSelectorWgt;
+ } else if (theType == WDG_DOUBLEVALUE_EDITOR) {
+ aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
+ } else if (theType == "export_file_selector") {
+ aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ } else if (theType == "sketch_launcher") {
+ aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
}
+ return aWgt;
}
-void PartSet_Module::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
-{
- if (myIsDragging) {
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation->id().toStdString() == SketchPlugin_Sketch::ID())
- return; // No edit operation activated
-
- static Events_ID anEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);
- Handle(V3d_View) aView = theWnd->v3dView();
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
- double aX, aY;
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, aY);
- double dX = aX - myCurX;
- double dY = aY - myCurY;
-
- if ((aOperation->id().toStdString() == SketchPlugin_Line::ID()) &&
- (myEditingAttr.size() == 1) &&
- myEditingAttr.first()) {
- // probably we have prehighlighted point
- AttributePtr aAttr = myEditingAttr.first();
- std::string aAttrId = aAttr->id();
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- // Find corresponded widget to provide dragging
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- if (aWgt->attributeID() == aAttrId) {
- PartSet_WidgetPoint2D* aWgt2d = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aWgt2d) {
- aWgt2d->setPoint(aWgt2d->x() + dX, aWgt2d->y() + dY);
- break;
- }
- }
+bool PartSet_Module::deleteObjects()
+{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
+
+ //SessionPtr aMgr = ModelAPI_Session::get();
+ // 1. check whether the delete should be processed in the module
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
+ isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (isSketchOp || isNestedOp) {
+ // 2. find selected presentations
+ // selected objects should be collected before the current operation abort because
+ // the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
+ ModuleBase_ISelection* aSel = workshop()->selection();
+ QObjectPtrList aSelectedObj = aSel->selectedPresentations();
+ // if there are no selected objects in the viewer, that means that the selection in another
+ // place cased this method. It is necessary to return the false value to understande in above
+ // method that delete is not processed
+ if (aSelectedObj.count() == 0)
+ return false;
+
+ // avoid delete of the objects, which are not belong to the current sketch
+ // in order to do not delete results of other sketches
+ QObjectPtrList aSketchObjects;
+ QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
+ for ( ; anIt != aLast; anIt++) {
+ ObjectPtr anObject = *anIt;
+ if (mySketchMgr->isObjectOfSketch(anObject)) {
+ // sketch feature should be used in this list because workshop deletes features only
+ // results are skipped
+ FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
+ aSketchObjects.append(aSketchFeature);
}
- } else {
- foreach(FeaturePtr aFeature, myEditingFeatures) {
- std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSketchFeature) {
- aSketchFeature->move(dX, dY);
- ModelAPI_EventCreator::get()->sendUpdated(aSketchFeature, anEvent);
+ }
+ // if the selection contains only local selected presentations from other sketches,
+ // the Delete operation should not be done at all
+ if (aSketchObjects.size() == 0)
+ return true;
+
+ // 3. start operation
+ QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
+ ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
+
+ // the active nested sketch operation should be aborted unconditionally
+ // the Delete action should be additionally granted for the Sketch operation
+ // in order to do not abort/commit it
+ if (!anOpMgr->canStartOperation(anOpAction->id(), isSketchOp/*granted*/))
+ return true; // the objects are processed but can not be deleted
+
+ anOpMgr->startOperation(anOpAction);
+
+ // 4. delete features
+ // sketch feature should be skipped, only sub-features can be removed
+ // when sketch operation is active
+ aWorkshop->deleteFeatures(aSketchObjects);
+ // 5. stop operation
+ anOpMgr->commitOperation();
+ }
+ else {
+ bool isPartRemoved = false;
+ // Delete part with help of PartSet plugin
+ // TODO: the deleted objects has to be processed by multiselection
+ QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
+ if (aObjects.size() == 1) {
+ ObjectPtr aObj = aObjects.first();
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
+ if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
+ // Remove feature should be created in the document of the part results
+ ResultPtr aPartResult = aFeature->firstResult();
+ if (aPartResult.get()) {
+ std::shared_ptr<ModelAPI_ResultPart> aPart =
+ std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
+ DocumentPtr aPartDoc = aPart->partDoc();
+ if (aPartDoc.get()) {
+ ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction
+ (PartSetPlugin_Remove::ID().c_str(), this);
+ if (!anOpMgr->canStartOperation(anOpAction->id()))
+ return true; // the objects are processed but can not be deleted
+
+ anOpMgr->startOperation(anOpAction);
+
+ FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
+ aFeature->execute();
+
+ anOpMgr->commitOperation();
+ isPartRemoved = true;
+ }
}
}
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_MOVED));
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
}
- myDragDone = true;
- myCurX = aX;
- myCurY = aY;
+ return isPartRemoved;
}
+ return true;
}
-void PartSet_Module::onMouseDoubleClick(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+void PartSet_Module::onFeatureTriggered()
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation && aOperation->isEditOperation()) {
- std::string aId = aOperation->id().toStdString();
- if ((aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID()) ||
- (aId == SketchPlugin_ConstraintRadius::ID()))
- {
- // Activate dimension value editing on double click
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- // Find corresponded widget to activate value editing
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- if (aWgt->attributeID() == "ConstraintValue") {
- aWgt->focusTo();
- return;
- }
+ QAction* aCmd = dynamic_cast<QAction*>(sender());
+ if (aCmd->isCheckable() && aCmd->isChecked()) {
+ // 1. check whether the delete should be processed in the module
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
+ if (isNestedOp) {
+ // in case if in the viewer nothing is displayed, the create operation should not be
+ // comitted even if all values of the feature are initialized
+ if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
+ // the action information should be saved before the operation is aborted
+ // because this abort leads to update command status, which unchecks this action
+ anOperation->abort();
+ launchOperation(aCmd->data().toString());
}
}
}
+ ModuleBase_IModule::onFeatureTriggered();
}
-void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
+void PartSet_Module::launchOperation(const QString& theCmdId)
{
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
- anOpMgr->onKeyReleased(theEvent);
+ if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
+ // Show constraints if a constraint was anOperation
+ myHasConstraintShown = mySketchMgr->isConstraintsShown();
+ mySketchMgr->onShowConstraintsToggle(true);
+ }
+ ModuleBase_IModule::launchOperation(theCmdId);
}
-void PartSet_Module::onEnterReleased()
+
+void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
{
- myRestartingMode = RM_EmptyFeatureUsed;
+ Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
+ if (!anAIS.IsNull()) {
+ Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
+ if (!aDim.IsNull()) {
+ aCtx->SetZLayer(aDim, myVisualLayerId);
+ } else {
+ Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
+ if (!aCons.IsNull())
+ aCtx->SetZLayer(aCons, myVisualLayerId);
+ }
+ }
}
-void PartSet_Module::onOperationActivatedByPreselection()
+void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (!aOperation)
+ // this is obsolete
+ // it should be recomputed in order to disappear in the viewer if the corresponded object
+ // is erased
+ //if (myCustomPrs->isActive())
+ // myCustomPrs->redisplay(theObject, false);
+}
+
+void PartSet_Module::onViewTransformed(int theTrsfType)
+{
+ // Set length of arrows constant in pixel size
+ // if the operation is panning or rotate or panglobal then do nothing
+ if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
+ return;
+ ModuleBase_IViewer* aViewer = myWorkshop->viewer();
+ Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+ if (aContext.IsNull())
return;
- // Set final definitions if they are necessary
- //propertyPanelDefined(aOperation);
+ //Handle(V3d_View) aView = aViewer->activeView();
- /// Commit sketcher operations automatically
- FeaturePtr aFeature = aOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
- aOperation->commit();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
+ Handle(V3d_View) aView;
+ double aScale = 0;
+ for (aV3dViewer->InitDefinedViews();
+ aV3dViewer->MoreDefinedViews();
+ aV3dViewer->NextDefinedViews()) {
+ Handle(V3d_View) aV = aV3dViewer->DefinedView();
+ double aS = aV->Scale();
+ if (aS > aScale) {
+ aScale = aS;
+ aView = aV;
+ }
+ }
+ if (aView.IsNull())
+ return;
+ double aLen = aView->Convert(20);
+
+ double aPrevLen = SketcherPrs_Tools::getArrowSize();
+ SketcherPrs_Tools::setArrowSize(aLen);
+ const double aPrevScale = aViewer->Scale(aViewer->activeView());
+ const double aCurScale = aViewer->activeView()->Camera()->Scale();
+ aViewer->SetScale(aViewer->activeView(), aCurScale);
+ SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
+ bool isModified = false;
+ QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
+ foreach (AISObjectPtr aAIS, aPrsList) {
+ Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
+
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
+ if (!aDim.IsNull()) {
+ aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
+ aContext->Redisplay(aDim, false);
+ isModified = true;
+ }
}
+ if (isModified)
+ aDisplayer->updateViewer();
}
-void PartSet_Module::onNoMoreWidgets()
+bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation) {
- /// Restart sketcher operations automatically
- FeaturePtr aFeature = aOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
- if (myRestartingMode != RM_Forbided)
- myRestartingMode = RM_LastFeatureUsed;
- aOperation->commit();
- }
- }
+ bool isRedisplayed = false;
+ if (myCustomPrs->isActive())
+ isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
+
+ return isRedisplayed;
}
-QStringList PartSet_Module::sketchOperationIdList() const
+void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
{
- QStringList aIds;
- aIds << SketchPlugin_Line::ID().c_str();
- aIds << SketchPlugin_Point::ID().c_str();
- aIds << SketchPlugin_Arc::ID().c_str();
- aIds << SketchPlugin_Circle::ID().c_str();
- aIds << SketchPlugin_ConstraintLength::ID().c_str();
- aIds << SketchPlugin_ConstraintDistance::ID().c_str();
- aIds << SketchPlugin_ConstraintRigid::ID().c_str();
- aIds << SketchPlugin_ConstraintRadius::ID().c_str();
- aIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
- aIds << SketchPlugin_ConstraintParallel::ID().c_str();
- return aIds;
+ XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
+ if (aOB) {
+ //QLineEdit* aLabel = aOB->activeDocLabel();
+ //QPalette aPalet = aLabel->palette();
+ //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
+ //aLabel->setPalette(aPalet);
+ aOB->treeView()->setExpandsOnDoubleClick(false);
+ connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
+ SLOT(onTreeViewDoubleClick(const QModelIndex&)));
+#ifdef ModuleDataModel
+ connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
+ SLOT(onTreeViewDoubleClick(const QModelIndex&)));
+ connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
+ myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
+#endif
+ }
}
-void PartSet_Module::onVertexSelected(ObjectPtr theObject, const TopoDS_Shape& theShape)
+ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
{
+ ObjectPtr anObject;
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
+ if (aOperation) {
/// If last line finished on vertex the lines creation sequence has to be break
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
- if (aWidgets.last() == aPanel->activeWidget()) {
- myRestartingMode = RM_Forbided;
- }
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ // if there is an active widget, find the presented object in it
+ if (!anActiveWidget)
+ anActiveWidget = aPanel->preselectionWidget();
+
+ ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
+ (anActiveWidget);
+ if (aWidgetValidated)
+ anObject = aWidgetValidated->findPresentedObject(theAIS);
}
+ return anObject;
}
-QWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
- Config_WidgetAPI* theWidgetApi, std::string theParentId,
- QList<ModuleBase_ModelWidget*>& theModelWidgets)
+void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
{
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
- if (theType == "sketch-start-label") {
- PartSet_WidgetSketchLabel* aWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- connect(aWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
- this, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
-
- } else if (theType == "sketch-2dpoint_selector") {
- PartSet_WidgetPoint2D* aWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(myCurrentSketch);
-
- connect(aWgt, SIGNAL(vertexSelected(ObjectPtr, const TopoDS_Shape&)),
- this, SLOT(onVertexSelected(ObjectPtr, const TopoDS_Shape&)));
-
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
+ QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
+ int aSelected = aObjects.size();
+ SessionPtr aMgr = ModelAPI_Session::get();
+ QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
+ QAction* aActivatePartSetAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
+ if (aSelected == 1) {
+ bool hasResult = false;
+ bool hasFeature = false;
+ bool hasParameter = false;
+ bool hasSubFeature = false;
+ ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
+
+ ObjectPtr aObject = aObjects.first();
+ if (aObject) {
+ ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
+ FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
+ bool isPart = aPart.get() ||
+ (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
+ if (isPart) {
+ DocumentPtr aPartDoc;
+ if (!aPart.get()) {
+ aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
+ }
+ if (aPart.get()) // this may be null is Part feature is disabled
+ aPartDoc = aPart->partDoc();
+
+ theMenu->addAction(aActivatePartAction);
+ aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
+
+ } else if (aObject->document() == aMgr->activeDocument()) {
+ if (hasParameter || hasFeature)
+ theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
+ }
- } if (theType == "point2ddistance") {
- PartSet_WidgetPoint2dDistance* aWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
- aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(myCurrentSketch);
+ ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
+ if( aResult.get() )
+ theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
+ } else { // If feature is 0 the it means that selected root object (document)
+ theMenu->addAction(aActivatePartSetAction);
+ aActivatePartSetAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
+ }
+ } else if (aSelected == 0) {
+ // if there is no selection then it means that upper label is selected
+ QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
+ if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
+ theMenu->addAction(aActivatePartSetAction);
+ aActivatePartSetAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
+ }
+ bool aNotDeactivate = (myWorkshop->currentOperation() == 0);
+ if (!aNotDeactivate) {
+ aActivatePartAction->setEnabled(false);
+ aActivatePartSetAction->setEnabled(false);
+ }
+}
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
+void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
+{
+ if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
+ // Do not change activation of parts if an operation active
+ static QStringList aAllowActivationList;
+ if (aAllowActivationList.isEmpty())
+ aAllowActivationList <<
+ QString(PartSetPlugin_Part::ID().c_str()) <<
+ QString(PartSetPlugin_Duplicate::ID().c_str()) <<
+ QString(PartSetPlugin_Remove::ID().c_str());
+ if (myWorkshop->currentOperation() &&
+ (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
+ return;
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
+ QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
+ QPalette aPalet = aLabel->palette();
+
+ SessionPtr aMgr = ModelAPI_Session::get();
+ DocumentPtr aActiveDoc = aMgr->activeDocument();
+#ifdef ModuleDataModel
+ QModelIndex aOldIndex = myDataModel->activePartTree();
+ DocumentPtr aDoc = aMgr->moduleDocument();
+ if (aActiveDoc == aDoc) {
+ if (aOldIndex.isValid())
+ aTreeView->setExpanded(aOldIndex, false);
+ myDataModel->deactivatePart();
+ aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
+ } else {
+ std::string aGrpName = ModelAPI_ResultPart::group();
+ for (int i = 0; i < aDoc->size(aGrpName); i++) {
+ ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
+ if (aPart->partDoc() == aActiveDoc) {
+ QModelIndex aIndex = myDataModel->partIndex(aPart);
+ if (myDataModel->activatePart(aIndex)) {
+ if (aOldIndex.isValid())
+ aTreeView->setExpanded(aOldIndex, false);
+ aTreeView->setExpanded(myDataModel->activePartTree(), true);
+ aPalet.setColor(QPalette::Text, Qt::black);
+ }
+ break;
+ }
+ }
+ }
+#else
+ if (aActivePartIndex.isValid())
+ aTreeView->setExpanded(aActivePartIndex, false);
+ XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
+ aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
+ if (aActivePartIndex.isValid())
+ aTreeView->setExpanded(aActivePartIndex, true);
+#endif
+ aLabel->setPalette(aPalet);
+ aWorkshop->updateCommandStatus();
+
+ // Update displayed objects in order to update active color
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ QObjectPtrList aObjects = aDisplayer->displayedObjects();
+ bool aHidden;
+ foreach(ObjectPtr aObj, aObjects) {
+ //TODO: replace by redisplay event.
+ aHidden = !aObj->data() || !aObj->data()->isValid() ||
+ aObj->isDisabled() || (!aObj->isDisplayed());
+ if (!aHidden)
+ aDisplayer->redisplay(aObj, false);
+ }
+ aDisplayer->updateViewer();
+ }
+}
- } if (theType == "sketch_shape_selector") {
- PartSet_WidgetShapeSelector* aWgt =
- new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(myCurrentSketch);
+void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
+{
+ if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
+ return;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (!theIndex.isValid()) {
+ aMgr->setActiveDocument(aMgr->moduleDocument());
+ return;
+ }
+ if (theIndex.column() != 0) // Use only first column
+ return;
+#ifdef ModuleDataModel
+ ObjectPtr aObj = myDataModel->object(theIndex);
+#else
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
+ // De not use non editable Indexes
+ if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
+ return;
+ ObjectPtr aObj = aDataModel->object(theIndex);
+#endif
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
+ ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
+ if (!aPart.get()) { // Probably this is Feature
+ FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
+ if (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID())) {
+ aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
+ }
+ }
+ if (aPart.get()) { // if this is a part
+ if (aPart->partDoc() == aMgr->activeDocument()) {
+ myMenuMgr->activatePartSet();
+ } else {
+ aPart->activate();
+ }
+ }
+}
- } if (theType == "sketch_constraint_shape_selector") {
- PartSet_WidgetConstraintShapeSelector* aWgt =
- new PartSet_WidgetConstraintShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(myCurrentSketch);
- theModelWidgets.append(aWgt);
- return aWgt->getControl();
+void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
+{
+ // z layer is created for all started operations in order to visualize operation AIS presentation
+ // over the object
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
+ if (aContext.IsNull())
+ return;
- }else
- return 0;
+ Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
+ if (myVisualLayerId == 0) {
+ if (myVisualLayerId == 0)
+ aViewer->AddZLayer(myVisualLayerId);
+ } else {
+ TColStd_SequenceOfInteger aZList;
+ aViewer->GetAllZLayers(aZList);
+ bool aFound = false;
+ for (int i = 1; i <= aZList.Length(); i++) {
+ if (aZList(i) == myVisualLayerId) {
+ aFound = true;
+ break;
+ }
+ }
+ if (!aFound)
+ aViewer->AddZLayer(myVisualLayerId);
+ }
+ // if there is an active operation with validated widget,
+ // the filters of this widget should be activated in the created view
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (aOperation) {
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ if (anActiveWidget) {
+ ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
+ (anActiveWidget);
+ if (aWidgetValidated)
+ aWidgetValidated->activateFilters(true);
+ }
+ }
}
-
