#include "PartSet_Tools.h"
#include "PartSet_WidgetPoint2d.h"
#include "PartSet_WidgetPoint2dDistance.h"
+#include "PartSet_WidgetPoint2DFlyout.h"
#include "PartSet_WidgetShapeSelector.h"
-#include "PartSet_WidgetPoint2dAngle.h"
#include "PartSet_WidgetMultiSelector.h"
#include "PartSet_WidgetEditor.h"
#include "PartSet_WidgetFileSelector.h"
#include "PartSet_WidgetSketchCreator.h"
#include "PartSet_SketcherMgr.h"
+#include "PartSet_SketcherReetntrantMgr.h"
#include "PartSet_MenuMgr.h"
#include "PartSet_CustomPrs.h"
#include "PartSet_IconFactory.h"
+#include "PartSet_WidgetChoice.h"
#include "PartSet_Filters.h"
#include "PartSet_FilterInfinite.h"
#include <PartSetPlugin_Duplicate.h>
#include <ModuleBase_Operation.h>
+#include <ModuleBase_OperationAction.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IViewWindow.h>
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_WidgetValidated.h>
#include <ModuleBase_FilterFactory.h>
#include <ModuleBase_Tools.h>
-#include <GeomValidators_ShapeType.h>
-
-#include <GeomValidators_Face.h>
-#include <GeomValidators_ConstructionComposite.h>
-#include <GeomValidators_ZeroOffset.h>
-#include <GeomValidators_BooleanArguments.h>
-#include <GeomValidators_Different.h>
-
+#include <ModuleBase_OperationFeature.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Events.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_Session.h>
-#include <ModelAPI_ShapeValidator.h>
#include <ModelAPI_ResultBody.h>
+#include <ModelAPI_AttributeString.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_ObjectsBrowser.h>
#include <XGUI_SelectionMgr.h>
#include <XGUI_DataModel.h>
+#include <XGUI_ErrorMgr.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
-#include <SketchPlugin_Line.h>
-#include <SketchPlugin_Arc.h>
-#include <SketchPlugin_Circle.h>
-#include <SketchPlugin_Point.h>
#include <SketchPlugin_ConstraintAngle.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
}
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
- : ModuleBase_IModule(theWshop),
- myRestartingMode(RM_None), myVisualLayerId(0)
+: ModuleBase_IModule(theWshop),
+ myVisualLayerId(0)
{
new PartSet_IconFactory();
mySketchMgr = new PartSet_SketcherMgr(this);
- myDataModel = new PartSet_DocumentDataModel(this);
+ mySketchReentrantMgr = new PartSet_SketcherReetntrantMgr(theWshop);
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
- connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
this, SLOT(onOperationActivatedByPreselection()));
SLOT(onViewTransformed(int)));
connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
SLOT(onViewCreated(ModuleBase_IViewWindow*)));
-
myMenuMgr = new PartSet_MenuMgr(this);
myCustomPrs = new PartSet_CustomPrs(theWshop);
mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
+
+ myHasConstraintShown[PartSet_Tools::Geometrical] = true;
+ myHasConstraintShown[PartSet_Tools::Dimensional] = true;
+
+ Config_PropManager::registerProp("Visualization", "operation_parameter_color",
+ "Reference shape wireframe color in operation", Config_Prop::Color,
+ PartSet_CustomPrs::OPERATION_PARAMETER_COLOR());
+ Config_PropManager::registerProp("Visualization", "operation_result_color",
+ "Result shape wireframe color in operation", Config_Prop::Color,
+ PartSet_CustomPrs::OPERATION_RESULT_COLOR());
+ Config_PropManager::registerProp("Visualization", "operation_highlight_color",
+ "Multi selector item color in operation", Config_Prop::Color,
+ PartSet_CustomPrs::OPERATION_HIGHLIGHT_COLOR());
}
PartSet_Module::~PartSet_Module()
aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
-
+ aFactory->registerValidator("PartSet_EqualSelection", new PartSet_EqualSelection);
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
- aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
-
aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
-
- aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
- aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
-
- aFactory->registerValidator("GeomValidators_ConstructionComposite",
- new GeomValidators_ConstructionComposite);
-
- aFactory->registerValidator("GeomValidators_ZeroOffset",
- new GeomValidators_ZeroOffset);
-
- aFactory->registerValidator("GeomValidators_BooleanArguments",
- new GeomValidators_BooleanArguments);
-
- aFactory->registerValidator("PartSet_SketchEntityValidator",
- new PartSet_SketchEntityValidator);
-
- aFactory->registerValidator("PartSet_SameTypeAttr",
- new PartSet_SameTypeAttrValidator);
-
- aFactory->registerValidator("GeomValidators_Different",
- new GeomValidators_Different);
+ aFactory->registerValidator("PartSet_SketchEntityValidator", new PartSet_SketchEntityValidator);
}
void PartSet_Module::registerFilters()
PLANE_SIZE);
Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
Config_Prop::Integer, SKETCH_WIDTH);
+ Config_PropManager::registerProp("Sketch planes", "rotate_to_plane", "Rotate to plane when selected",
+ Config_Prop::Boolean, "false");
}
-void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
+void PartSet_Module::connectToPropertyPanel(ModuleBase_ModelWidget* theWidget, const bool isToConnect)
+{
+ mySketchMgr->connectToPropertyPanel(theWidget, isToConnect);
+}
+
+void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
{
if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->commitNestedSketch(theOperation);
}
- if (theOperation->isEditOperation())
- return;
- // the selection is cleared after commit the create operation
- // in order to do not use the same selected objects in the restarted operation
- // for common behaviour, the selection is cleared even if the operation is not restarted
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
- aWorkshop->selector()->clearSelection();
-
/// Restart sketcher operations automatically
- FeaturePtr aFeature = theOperation->feature();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
- myRestartingMode == RM_EmptyFeatureUsed)) {
- myLastOperationId = theOperation->id();
- myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
-
- launchOperation(myLastOperationId);
+ if (!mySketchReentrantMgr->operationCommitted(theOperation)) {
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (aFOperation && !aFOperation->isEditOperation()) {
+ // the selection is cleared after commit the create operation
+ // in order to do not use the same selected objects in the restarted operation
+ // for common behaviour, the selection is cleared even if the operation is not restarted
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ aWorkshop->selector()->clearSelection();
+ }
}
- breakOperationSequence();
}
-void PartSet_Module::breakOperationSequence()
+void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
{
- myLastOperationId = "";
- myLastFeature = FeaturePtr();
- myRestartingMode = RM_None;
+ /// Restart sketcher operations automatically
+ mySketchReentrantMgr->operationAborted(theOperation);
}
-void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
- breakOperationSequence();
-}
+ /// Restart sketcher operations automatically
+ mySketchReentrantMgr->operationStarted(theOperation);
-void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
-{
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->startSketch(theOperation);
}
mySketchMgr->startNestedSketch(theOperation);
}
- myCustomPrs->activate(theOperation->feature());
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (aFOperation) {
+ myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
+ myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
+ }
}
-void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationResumed(ModuleBase_Operation* theOperation)
{
- myCustomPrs->deactivate();
+ ModuleBase_IModule::operationResumed(theOperation);
- if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
- mySketchMgr->stopSketch(theOperation);
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (aFOperation) {
+ myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeArguments, true);
+ myCustomPrs->activate(aFOperation->feature(), ModuleBase_IModule::CustomizeResults, true);
}
- else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
+}
+
+void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
+{
+ bool isModified = myCustomPrs->deactivate(ModuleBase_IModule::CustomizeArguments, false) ||
+ myCustomPrs->deactivate(ModuleBase_IModule::CustomizeResults, false);
+
+ if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->stopNestedSketch(theOperation);
}
+
+ //VSV: Viewer is updated on feature update and redisplay
+ if (isModified) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ aDisplayer->updateViewer();
+ }
+
+ QMap<PartSet_Tools::ConstraintVisibleState, bool>::const_iterator anIt = myHasConstraintShown.begin(),
+ aLast = myHasConstraintShown.end();
+ for (; anIt != aLast; anIt++) {
+ myHasConstraintShown[anIt.key()];
+ mySketchMgr->onShowConstraintsToggle(anIt.value(), myHasConstraintShown[anIt.key()]);
+ }
}
ModuleBase_Operation* PartSet_Module::currentOperation() const
bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
{
bool aValid = true;
- if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
+ if (theActionId == "MOVE_CMD") {
FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
if (aFeature) {
- // part features are removed in the PartSet module only.
+ // part features can not be moved in the history.
if (aFeature->getKind() == PartSetPlugin_Part::ID())
aValid = false;
}
return aValid;
}
-bool PartSet_Module::canCommitOperation() const
+bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
{
- return mySketchMgr->canCommitOperation();
+ // the sketch manager put the restriction to the objects erase
+ return mySketchMgr->canEraseObject(theObject);
}
bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
return mySketchMgr->canDisplayObject(theObject);
}
+void PartSet_Module::processHiddenObject(const std::list<ObjectPtr>& theObjects)
+{
+ mySketchMgr->processHiddenObject(theObjects);
+}
+
bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
{
bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
if (isSketchOp || isNestedOp) {
// in active sketch operation it is possible to activate operation object in selection
// in the edit operation, e.g. points of the line can be moved when the line is edited
- aCanActivate = aCanActivate || anOperation->isEditOperation();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
+ aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
}
return aCanActivate;
}
myMenuMgr->updateViewerMenu(theStdActions);
}
+QString PartSet_Module::getFeatureError(const FeaturePtr& theFeature)
+{
+ QString anError = ModuleBase_IModule::getFeatureError(theFeature);
+ if (anError.isEmpty())
+ anError = sketchMgr()->getFeatureError(theFeature);
+
+ return anError;
+}
+
+void PartSet_Module::grantedOperationIds(ModuleBase_Operation* theOperation,
+ QStringList& theIds) const
+{
+ myMenuMgr->grantedOperationIds(theOperation, theIds);
+
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+
+ theIds.append(aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text());
+ }
+}
void PartSet_Module::activeSelectionModes(QIntList& theModes)
{
return mySketchMgr->isMouseOverWindow();
}
+void PartSet_Module::closeDocument()
+{
+ clearViewer();
+}
+
+void PartSet_Module::clearViewer()
+{
+ myCustomPrs->clearPrs();
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ aDisplayer->deactivateSelectionFilters();
+}
+
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
- ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
- if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
- // we have to manually activate the sketch label in edit mode
- aPanel->activateWidget(aPanel->modelWidgets().first());
- return;
- }
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (!aFOperation)
+ return;
- // Restart last operation type
- if ((theOperation->id() == myLastOperationId) && myLastFeature) {
- ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
- if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
- // Initialise new line with first point equal to end of previous
- PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aPnt2dWgt) {
- std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
- std::shared_ptr<GeomDataAPI_Point2D> aPoint =
- std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
- if (aPoint) {
- aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
- PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
- aWgt->attributeID(), aPoint->x(), aPoint->y());
- aPanel->activateNextWidget(aPnt2dWgt);
- }
- }
- }
- }
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ // we have to manually activate the sketch label in edit mode
+ if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation()))
+ aPanel->activateWidget(aPanel->modelWidgets().first());
}
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
- anOpMgr->onKeyReleased(theEvent);
-}
-
-void PartSet_Module::onEnterReleased()
-{
- myRestartingMode = RM_EmptyFeatureUsed;
+ anOpMgr->onKeyReleased(theWnd->viewPort(), theEvent);
}
void PartSet_Module::onOperationActivatedByPreselection()
{
- ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- if(anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
- // Set final definitions if they are necessary
- //propertyPanelDefined(aOperation);
-
- /// Commit sketcher operations automatically
- anOperation->commit();
- }
-}
-
-void PartSet_Module::onNoMoreWidgets()
-{
- ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- if (anOperation) {
- if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
- if (myRestartingMode != RM_Forbided)
- myRestartingMode = RM_LastFeatureUsed;
- anOperation->commit();
- }
- }
-}
-
-void PartSet_Module::onVertexSelected()
-{
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
- /// If last line finished on vertex the lines creation sequence has to be break
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
- const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
- QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
- bool aFoundWidget = false;
- bool aFoundObligatory = false;
- for (; anIt != aLast && !aFoundObligatory; anIt++) {
- if (!aFoundWidget)
- aFoundWidget = *anIt == anActiveWidget;
- else
- aFoundObligatory = (*anIt)->isObligatory();
- }
- if (!aFoundObligatory)
- myRestartingMode = RM_Forbided;
- }
+ if (!mySketchReentrantMgr->canBeCommittedByPreselection())
+ return;
+ mySketchMgr->operationActivatedByPreselection();
}
ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
- theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
+ theWidgetApi, theParentId, mySketchMgr->showConstraintStates());
connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
- connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
- mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
+ connect(aLabelWgt, SIGNAL(showConstraintToggled(bool, int)),
+ mySketchMgr, SLOT(onShowConstraintsToggle(bool, int)));
aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
theWidgetApi, theParentId);
aPointWgt->setSketch(mySketchMgr->activeSketch());
- connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
+ connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
+ aWgt = aPointWgt;
+ }else if (theType == "sketch-2dpoint_flyout_selector") {
+ PartSet_WidgetPoint2DFlyout* aPointWgt = new PartSet_WidgetPoint2DFlyout(theParent, aWorkshop,
+ theWidgetApi, theParentId);
+ aPointWgt->setSketch(mySketchMgr->activeSketch());
+ connect(aPointWgt, SIGNAL(vertexSelected()), sketchReentranceMgr(), SLOT(onVertexSelected()));
aWgt = aPointWgt;
} else if (theType == "point2ddistance") {
PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
aWorkshop, theWidgetApi, theParentId);
aDistanceWgt->setSketch(mySketchMgr->activeSketch());
aWgt = aDistanceWgt;
- } else if(theType == "point2dangle") {
- PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
- aWorkshop, theWidgetApi, theParentId);
- anAngleWgt->setSketch(mySketchMgr->activeSketch());
- aWgt = anAngleWgt;
} else if (theType == "sketch_shape_selector") {
PartSet_WidgetShapeSelector* aShapeSelectorWgt =
new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
} else if (theType == "sketch_launcher") {
aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
+ } else if (theType == "module_choice") {
+ aWgt = new PartSet_WidgetChoice(theParent, theWidgetApi, theParentId);
+ connect(aWgt, SIGNAL(itemSelected(int)), SLOT(onBooleanOperationChange(int)));
}
return aWgt;
}
+ModuleBase_ModelWidget* PartSet_Module::activeWidget() const
+{
+ ModuleBase_ModelWidget* anActiveWidget = 0;
+
+ anActiveWidget = mySketchReentrantMgr->internalActiveWidget();
+ if (!anActiveWidget) {
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (aOperation) {
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ anActiveWidget = aPanel->activeWidget();
+ }
+ }
+ return anActiveWidget;
+}
bool PartSet_Module::deleteObjects()
{
- SessionPtr aMgr = ModelAPI_Session::get();
+ bool isProcessed = false;
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
+
+ //SessionPtr aMgr = ModelAPI_Session::get();
// 1. check whether the delete should be processed in the module
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
if (isSketchOp || isNestedOp) {
+ isProcessed = true;
// 2. find selected presentations
// selected objects should be collected before the current operation abort because
// the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
ModuleBase_ISelection* aSel = workshop()->selection();
QObjectPtrList aSelectedObj = aSel->selectedPresentations();
// if there are no selected objects in the viewer, that means that the selection in another
if (aSketchObjects.size() == 0)
return true;
- // the active nested sketch operation should be aborted unconditionally
- if (isNestedOp)
- anOperation->abort();
-
// 3. start operation
QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
- aMgr->startOperation(aDescription.toStdString());
+ ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
+
+ // the active nested sketch operation should be aborted unconditionally
+ // the Delete action should be additionally granted for the Sketch operation
+ // in order to do not abort/commit it
+ if (!anOpMgr->canStartOperation(anOpAction->id()))
+ return true; // the objects are processed but can not be deleted
+
+ anOpMgr->startOperation(anOpAction);
// 4. delete features
// sketch feature should be skipped, only sub-features can be removed
// when sketch operation is active
aWorkshop->deleteFeatures(aSketchObjects);
// 5. stop operation
- aWorkshop->displayer()->updateViewer();
- aMgr->finishOperation();
- } else {
- bool isPartRemoved = false;
- // Delete part with help of PartSet plugin
- // TODO: the deleted objects has to be processed by multiselection
- QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
- if (aObjects.size() == 1) {
- ObjectPtr aObj = aObjects.first();
- FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
- if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
- // Remove feature should be created in the document of the part results
- ResultPtr aPartResult = aFeature->firstResult();
- if (aPartResult.get()) {
- std::shared_ptr<ModelAPI_ResultPart> aPart =
- std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
- DocumentPtr aPartDoc = aPart->partDoc();
- if (aPartDoc.get()) {
- aMgr->startOperation(PartSetPlugin_Remove::ID());
- FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
- aFeature->execute();
- aMgr->finishOperation();
- isPartRemoved = true;
- }
- }
- }
- }
- return isPartRemoved;
+ anOpMgr->commitOperation();
}
- return true;
+ return isProcessed;
}
void PartSet_Module::onFeatureTriggered()
ModuleBase_IModule::onFeatureTriggered();
}
+void PartSet_Module::launchOperation(const QString& theCmdId)
+{
+ if (myWorkshop->currentOperation() &&
+ myWorkshop->currentOperation()->id().toStdString() == SketchPlugin_Sketch::ID()) {
+ const QMap<PartSet_Tools::ConstraintVisibleState, bool>& aShownStates = mySketchMgr->showConstraintStates();
+ myHasConstraintShown = aShownStates;
+ }
+ if (PartSet_SketcherMgr::constraintsIdList().contains(theCmdId)) {
+ // Show constraints if a constraint was anOperation
+ mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Geometrical);
+ mySketchMgr->onShowConstraintsToggle(true, PartSet_Tools::Dimensional);
+ }
+ ModuleBase_IModule::launchOperation(theCmdId);
+}
+
+
void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
{
Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
{
+ // this is obsolete
// it should be recomputed in order to disappear in the viewer if the corresponded object
// is erased
- if (myCustomPrs->isActive())
- myCustomPrs->customize(theObject);
+ //if (myCustomPrs->isActive())
+ // myCustomPrs->redisplay(theObject, false);
}
void PartSet_Module::onViewTransformed(int theTrsfType)
// if the operation is panning or rotate or panglobal then do nothing
if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
return;
-
ModuleBase_IViewer* aViewer = myWorkshop->viewer();
+ Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
+ if (aContext.IsNull())
+ return;
+
//Handle(V3d_View) aView = aViewer->activeView();
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
XGUI_Displayer* aDisplayer = aWorkshop->displayer();
- Handle(AIS_InteractiveContext) aContext = aViewer->AISContext();
-
Handle(V3d_Viewer) aV3dViewer = aContext->CurrentViewer();
Handle(V3d_View) aView;
double aScale = 0;
aDisplayer->updateViewer();
}
-void PartSet_Module::customizeObject(ObjectPtr theObject)
+void PartSet_Module::activateCustomPrs(const FeaturePtr& theFeature, const ModuleBase_CustomizeFlag& theFlag,
+ const bool theUpdateViewer)
+{
+ myCustomPrs->activate(theFeature, theFlag, theUpdateViewer);
+}
+
+void PartSet_Module::deactivateCustomPrs(const ModuleBase_CustomizeFlag& theFlag,
+ const bool theUpdateViewer)
{
- if (myCustomPrs->isActive())
- myCustomPrs->customize(theObject);
+ myCustomPrs->deactivate(theFlag, theUpdateViewer);
+}
+
+bool PartSet_Module::customizeObject(ObjectPtr theObject, const ModuleBase_CustomizeFlag& theFlag,
+ const bool theUpdateViewer)
+{
+ bool isRedisplayed = false;
+ if (myCustomPrs->isActive(theFlag))
+ isRedisplayed = myCustomPrs->redisplay(theObject, theFlag, theUpdateViewer);
+
+ return isRedisplayed;
}
void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
{
XGUI_ObjectsBrowser* aOB = dynamic_cast<XGUI_ObjectsBrowser*>(theObjectBrowser);
if (aOB) {
- QLineEdit* aLabel = aOB->activeDocLabel();
- QPalette aPalet = aLabel->palette();
- aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
- aLabel->setPalette(aPalet);
+ QLabel* aLabel = aOB->activeDocLabel();
+ aLabel->installEventFilter(myMenuMgr);
+ connect(aLabel, SIGNAL(customContextMenuRequested(const QPoint&)),
+ SLOT(onActiveDocPopup(const QPoint&)));
+ //QPalette aPalet = aLabel->palette();
+ //aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
+ //aLabel->setPalette(aPalet);
aOB->treeView()->setExpandsOnDoubleClick(false);
-#ifdef ModuleDataModel
connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
SLOT(onTreeViewDoubleClick(const QModelIndex&)));
- connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
- SLOT(onTreeViewDoubleClick(const QModelIndex&)));
- connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
- myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
-#endif
}
}
+void PartSet_Module::onActiveDocPopup(const QPoint& thePnt)
+{
+ SessionPtr aMgr = ModelAPI_Session::get();
+ QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PARTSET_CMD");
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ QLabel* aHeader = aWorkshop->objectBrowser()->activeDocLabel();
+
+ aActivatePartAction->setEnabled((aMgr->activeDocument() != aMgr->moduleDocument()));
+
+ QMenu aMenu;
+ aMenu.addAction(aActivatePartAction);
+ aMenu.exec(aHeader->mapToGlobal(thePnt));
+}
+
+
ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
{
ObjectPtr anObject;
if (aOperation) {
/// If last line finished on vertex the lines creation sequence has to be break
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
- // if there is an active widget, find the presented object in it
- if (!anActiveWidget)
- anActiveWidget = aPanel->preselectionWidget();
+ if (aPanel) {
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ // if there is an active widget, find the presented object in it
+ if (!anActiveWidget)
+ anActiveWidget = aPanel->preselectionWidget();
- ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
- (anActiveWidget);
- if (aWidgetValidated)
- anObject = aWidgetValidated->findPresentedObject(theAIS);
+ ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
+ (anActiveWidget);
+ if (aWidgetValidated)
+ anObject = aWidgetValidated->findPresentedObject(theAIS);
+ }
}
return anObject;
}
QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
int aSelected = aObjects.size();
SessionPtr aMgr = ModelAPI_Session::get();
+ QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
+
+ ModuleBase_Operation* aCurrentOp = myWorkshop->currentOperation();
if (aSelected == 1) {
bool hasResult = false;
bool hasFeature = false;
ObjectPtr aObject = aObjects.first();
if (aObject) {
ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObject);
- FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
+ FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObject);
bool isPart = aPart.get() ||
- (aPartFeature.get() && (aPartFeature->getKind() == PartSetPlugin_Part::ID()));
+ (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID()));
if (isPart) {
DocumentPtr aPartDoc;
if (!aPart.get()) {
- aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartFeature->firstResult());
+ aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aFeature->firstResult());
}
if (aPart.get()) // this may be null is Part feature is disabled
aPartDoc = aPart->partDoc();
- if (aMgr->activeDocument() == aPartDoc)
- theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
- else
- theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
+
+ theMenu->addAction(aActivatePartAction);
+ aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
+
} else if (aObject->document() == aMgr->activeDocument()) {
- if (hasParameter || hasFeature)
+ if (hasParameter || hasFeature) {
+ myMenuMgr->action("EDIT_CMD")->setEnabled(true);
theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
+ if (aCurrentOp && aFeature.get()) {
+ if (aCurrentOp->id().toStdString() == aFeature->getKind())
+ myMenuMgr->action("EDIT_CMD")->setEnabled(false);
+ }
+ }
}
ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
if( aResult.get() )
- {
theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
- }
- } else { // If feature is 0 the it means that selected root object (document)
- if (aMgr->activeDocument() != aMgr->moduleDocument())
- theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
}
- } else if (aSelected == 0) {
- // if there is no selection then it means that upper label is selected
- QModelIndexList aIndexes = myWorkshop->selection()->selectedIndexes();
- if (aIndexes.size() == 0) // it means that selection happens in top label outside of tree view
- if (aMgr->activeDocument() != aMgr->moduleDocument())
- theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
}
- bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
- myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
- myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
- myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
+ bool aNotDeactivate = (aCurrentOp == 0);
+ if (!aNotDeactivate) {
+ aActivatePartAction->setEnabled(false);
+ }
}
void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
- QLineEdit* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
+ QLabel* aLabel = aWorkshop->objectBrowser()->activeDocLabel();
QPalette aPalet = aLabel->palette();
SessionPtr aMgr = ModelAPI_Session::get();
DocumentPtr aActiveDoc = aMgr->activeDocument();
-#ifdef ModuleDataModel
- QModelIndex aOldIndex = myDataModel->activePartTree();
- DocumentPtr aDoc = aMgr->moduleDocument();
- if (aActiveDoc == aDoc) {
- if (aOldIndex.isValid())
- aTreeView->setExpanded(aOldIndex, false);
- myDataModel->deactivatePart();
- aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
- } else {
- std::string aGrpName = ModelAPI_ResultPart::group();
- for (int i = 0; i < aDoc->size(aGrpName); i++) {
- ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aDoc->object(aGrpName, i));
- if (aPart->partDoc() == aActiveDoc) {
- QModelIndex aIndex = myDataModel->partIndex(aPart);
- if (myDataModel->activatePart(aIndex)) {
- if (aOldIndex.isValid())
- aTreeView->setExpanded(aOldIndex, false);
- aTreeView->setExpanded(myDataModel->activePartTree(), true);
- aPalet.setColor(QPalette::Text, Qt::black);
- }
- break;
- }
- }
- }
-#else
- // Problem with MPV: At first time on creation it doesn't work because Part feature
- // creation event will be sent after
if (aActivePartIndex.isValid())
aTreeView->setExpanded(aActivePartIndex, false);
XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
if (aActivePartIndex.isValid())
aTreeView->setExpanded(aActivePartIndex, true);
-#endif
+
aLabel->setPalette(aPalet);
aWorkshop->updateCommandStatus();
// Update displayed objects in order to update active color
XGUI_Displayer* aDisplayer = aWorkshop->displayer();
QObjectPtrList aObjects = aDisplayer->displayedObjects();
- foreach(ObjectPtr aObj, aObjects)
- aDisplayer->redisplay(aObj, false);
+ bool aHidden;
+ foreach(ObjectPtr aObj, aObjects) {
+ //TODO: replace by redisplay event.
+ aHidden = !aObj->data() || !aObj->data()->isValid() ||
+ aObj->isDisabled() || (!aObj->isDisplayed());
+ if (!aHidden)
+ aDisplayer->redisplay(aObj, false);
+ }
aDisplayer->updateViewer();
}
}
}
if (theIndex.column() != 0) // Use only first column
return;
- ObjectPtr aObj = myDataModel->object(theIndex);
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
+ // De not use non editable Indexes
+ if ((aDataModel->flags(theIndex) & Qt::ItemIsSelectable) == 0)
+ return;
+ ObjectPtr aObj = aDataModel->object(theIndex);
+
ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
if (!aPart.get()) { // Probably this is Feature
FeaturePtr aPartFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
}
if (aPart.get()) { // if this is a part
if (aPart->partDoc() == aMgr->activeDocument()) {
- aMgr->setActiveDocument(aMgr->moduleDocument());
+ myMenuMgr->activatePartSet();
} else {
aPart->activate();
}
{
// z layer is created for all started operations in order to visualize operation AIS presentation
// over the object
- Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
+ if (aContext.IsNull())
+ return;
+
+ Handle(V3d_Viewer) aViewer = aContext->CurrentViewer();
if (myVisualLayerId == 0) {
if (myVisualLayerId == 0)
aViewer->AddZLayer(myVisualLayerId);
if (!aFound)
aViewer->AddZLayer(myVisualLayerId);
}
+ // if there is an active operation with validated widget,
+ // the filters of this widget should be activated in the created view
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (aOperation) {
+ ModuleBase_ModelWidget* anActiveWidget = activeWidget();
+ if (anActiveWidget) {
+ ModuleBase_WidgetSelector* aWSelector = dynamic_cast<ModuleBase_WidgetSelector*>(anActiveWidget);
+ if (aWSelector)
+ aWSelector->activateSelectionAndFilters(true);
+ }
+ }
+}
+
+//******************************************************
+void PartSet_Module::widgetStateChanged(int thePreviousState)
+{
+ mySketchMgr->widgetStateChanged(thePreviousState);
+}
+
+bool PartSet_Module::processEnter(const std::string& thePreviousAttributeID)
+{
+ return mySketchReentrantMgr->processEnter(thePreviousAttributeID);
+}
+
+//******************************************************
+void PartSet_Module::beforeOperationStarted(ModuleBase_Operation* theOperation)
+{
+}
+
+//******************************************************
+void PartSet_Module::beforeOperationStopped(ModuleBase_Operation* theOperation)
+{
+ if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
+ mySketchMgr->stopSketch(theOperation);
+ }
+}
+
+//******************************************************
+GeomShapePtr PartSet_Module::findShape(const AttributePtr& theAttribute)
+{
+ GeomShapePtr aGeomShape;
+
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ if (anOperation && PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
+ aGeomShape = PartSet_Tools::findShapeBy2DPoint(theAttribute, myWorkshop);
+ }
+ return aGeomShape;
+}
+
+//******************************************************
+AttributePtr PartSet_Module::findAttribute(const ObjectPtr& theObject,
+ const GeomShapePtr& theGeomShape)
+{
+ AttributePtr anAttribute;
+ GeomShapePtr aGeomShape = theGeomShape;
+ if (!aGeomShape.get()) {
+ // processing shape of result, e.g. sketch circle center is selected, this is a result
+ // the geom shape is empty, the shape of result should be used
+ ResultPtr aResult = std::dynamic_pointer_cast<ModelAPI_Result>(theObject);
+ if (aResult.get()) {
+ aGeomShape = aResult->shape();
+ }
+ }
+
+ if (aGeomShape.get()) {
+ TopoDS_Shape aTDSShape = aGeomShape->impl<TopoDS_Shape>();
+ return PartSet_Tools::findAttributeBy2dPoint(theObject, aTDSShape,
+ mySketchMgr->activeSketch());
+ }
+ return anAttribute;
+}
+
+//******************************************************
+void PartSet_Module::onBooleanOperationChange(int theOperation)
+{
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (!aOperation)
+ return;
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ switch (theOperation) {
+ case 0:
+ aPanel->setWindowTitle(tr("Cut"));
+ break;
+ case 1:
+ aPanel->setWindowTitle(tr("Fuse"));
+ break;
+ case 2:
+ aPanel->setWindowTitle(tr("Common"));
+ break;
+ }
}