+// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
+
#include "PartSet_Module.h"
-#include <PartSet_OperationSketch.h>
#include <PartSet_WidgetSketchLabel.h>
#include <PartSet_Validators.h>
#include <PartSet_Tools.h>
-#include <PartSet_WidgetPoint2D.h>
+#include <PartSet_WidgetPoint2d.h>
#include <PartSet_WidgetPoint2dDistance.h>
#include <PartSet_WidgetShapeSelector.h>
+#include <PartSet_SketcherMgr.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IViewWindow.h>
#include <ModuleBase_IPropertyPanel.h>
+#include <ModuleBase_WidgetEditor.h>
+#include <ModuleBase_FilterFactory.h>
+#include <ModuleBase_FilterLinearEdge.h>
+#include <ModuleBase_FilterFace.h>
+#include <ModuleBase_FilterMulti.h>
+#include <ModuleBase_FilterCustom.h>
+#include <ModuleBase_FilterNoConsructionSubShapes.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Events.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_Session.h>
+#include <ModelAPI_ShapeValidator.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
-#include <XGUI_MainWindow.h>
#include <XGUI_Displayer.h>
-#include <XGUI_Viewer.h>
#include <XGUI_Workshop.h>
#include <XGUI_OperationMgr.h>
-#include <XGUI_ViewPort.h>
-#include <XGUI_ActionsMgr.h>
-#include <XGUI_ViewerProxy.h>
-#include <XGUI_ContextMenuMgr.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ModuleConnector.h>
#include <XGUI_Tools.h>
-#include <SketchPlugin_Line.h>
+#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
-#include <SketchPlugin_Point.h>
-#include <SketchPlugin_Arc.h>
-#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_Line.h>
+//#include <SketchPlugin_Arc.h>
+//#include <SketchPlugin_Circle.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
-#include <SketchPlugin_ConstraintRigid.h>
+//#include <SketchPlugin_ConstraintRigid.h>
#include <Events_Loop.h>
+#include <Config_PropManager.h>
#include <StdSelect_TypeOfFace.hxx>
#include <TopoDS_Vertex.hxx>
#include <QDebug>
#endif
-
-/// Returns list of unique objects by sum of objects from List1 and List2
-QList<ObjectPtr> getSumList(const QList<ModuleBase_ViewerPrs>& theList1,
- const QList<ModuleBase_ViewerPrs>& theList2)
-{
- QList<ObjectPtr> aRes;
- foreach (ModuleBase_ViewerPrs aPrs, theList1) {
- if (!aRes.contains(aPrs.object()))
- aRes.append(aPrs.object());
- }
- foreach (ModuleBase_ViewerPrs aPrs, theList2) {
- if (!aRes.contains(aPrs.object()))
- aRes.append(aPrs.object());
- }
- return aRes;
-}
-
/*!Create and return new instance of XGUI_Module*/
extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
{
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
: ModuleBase_IModule(theWshop),
- myIsDragging(false), myRestartingMode(RM_None), myDragDone(false)
+ myRestartingMode(RM_None)
{
//myWorkshop = dynamic_cast<XGUI_Workshop*>(theWshop);
- ModuleBase_IViewer* aViewer = aViewer = theWshop->viewer();
- connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
-
- connect(aViewer, SIGNAL(mouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMouseReleased(ModuleBase_IViewWindow*, QMouseEvent*)));
-
- connect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMouseMoved(ModuleBase_IViewWindow*, QMouseEvent*)));
+ mySketchMgr = new PartSet_SketcherMgr(this);
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
+ connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
+ this, SLOT(onOperationActivatedByPreselection()));
+ ModuleBase_IViewer* aViewer = theWshop->viewer();
connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
}
{
if (!myDocumentShapeFilter.IsNull())
myDocumentShapeFilter.Nullify();
- if (!myPlaneFilter.IsNull())
- myPlaneFilter.Nullify();
}
void PartSet_Module::registerValidators()
aFactory->registerValidator("PartSet_PerpendicularValidator", new PartSet_PerpendicularValidator);
aFactory->registerValidator("PartSet_ParallelValidator", new PartSet_ParallelValidator);
aFactory->registerValidator("PartSet_RadiusValidator", new PartSet_RadiusValidator);
+ aFactory->registerValidator("PartSet_RigidValidator", new PartSet_RigidValidator);
+ aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
+ aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
+ aFactory->registerValidator("PartSet_SketchValidator", new PartSet_SketchValidator);
}
+void PartSet_Module::registerFilters()
+{
+ //Registering of selection filters
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
+
+ aFactory->registerFilter("EdgeFilter", new ModuleBase_FilterLinearEdge);
+ aFactory->registerFilter("FaceFilter", new ModuleBase_FilterFace);
+ aFactory->registerFilter("MultiFilter", new ModuleBase_FilterMulti);
+ Handle(SelectMgr_Filter) aSelectFilter = new ModuleBase_FilterNoConsructionSubShapes(workshop());
+ aFactory->registerFilter("NoConstructionSubShapesFilter",
+ new ModuleBase_FilterCustom(aSelectFilter));
+}
-void PartSet_Module::onOperationComitted(ModuleBase_Operation* theOperation)
+void PartSet_Module::registerProperties()
+{
+ Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
+ PLANE_SIZE);
+ Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
+ Config_Prop::Integer, SKETCH_WIDTH);
+}
+
+void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
{
if (theOperation->isEditOperation())
return;
+ // the selection is cleared after commit the create operation
+ // in order to do not use the same selected objects in the restarted operation
+ // for common behaviour, the selection is cleared even if the operation is not restarted
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
+ if (!aContext.IsNull())
+ aContext->ClearSelected();
+
/// Restart sketcher operations automatically
FeaturePtr aFeature = theOperation->feature();
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
myRestartingMode == RM_EmptyFeatureUsed)) {
myLastOperationId = theOperation->id();
myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
+
launchOperation(myLastOperationId);
}
breakOperationSequence();
myRestartingMode = RM_None;
}
-void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
{
breakOperationSequence();
}
-void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
- // Display all sketcher sub-Objects
- myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(theOperation->feature());
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
-
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);
- std::list<ResultPtr> aResults = aFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->display((*aIt), false);
- }
- aDisplayer->display(aFeature);
- }
- // Hide sketcher result
- std::list<ResultPtr> aResults = myCurrentSketch->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->erase((*aIt), false);
- }
- aDisplayer->erase(myCurrentSketch);
-
-
- if (myPlaneFilter.IsNull())
- myPlaneFilter = new ModuleBase_ShapeInPlaneFilter();
- myWorkshop->viewer()->addSelectionFilter(myPlaneFilter);
- if (theOperation->isEditOperation()) {
- // If it is editing of sketch then it means that plane is already defined
- std::shared_ptr<GeomAPI_Pln> aPln = PartSet_Tools::sketchPlane(myCurrentSketch);
- myPlaneFilter->setPlane(aPln->impl<gp_Pln>());
- }
+ mySketchMgr->startSketch(theOperation);
}
if (myDocumentShapeFilter.IsNull())
- myDocumentShapeFilter = new ModuleBase_ShapeDocumentFilter(myWorkshop);
+ myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
}
-void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
{
if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
- DataPtr aData = myCurrentSketch->data();
- if ((!aData) || (!aData->isValid())) {
- // The sketch was aborted
- myCurrentSketch = CompositeFeaturePtr();
- return;
- }
- // Hide all sketcher sub-Objects
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);
- std::list<ResultPtr> aResults = aFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->erase((*aIt), false);
- }
- aDisplayer->erase(aFeature, false);
- }
- // Display sketcher result
- std::list<ResultPtr> aResults = myCurrentSketch->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->display((*aIt), false);
- }
- aDisplayer->display(myCurrentSketch);
-
- myCurrentSketch = CompositeFeaturePtr();
- myWorkshop->viewer()->removeSelectionFilter(myPlaneFilter);
+ mySketchMgr->stopSketch(theOperation);
}
myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
}
-void PartSet_Module::onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>& thePln)
+bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
{
- myPlaneFilter->setPlane(thePln->impl<gp_Pln>());
+ bool aCanDisplay = false;
+ CompositeFeaturePtr aSketchFeature = mySketchMgr->activeSketch();
+ if (aSketchFeature.get() != NULL) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+
+ // MPV: the second and third conditions to avoid crash on exit for application
+ if (aFeature.get() != NULL && aFeature->data().get() && aFeature->data()->isValid()) {
+ if (aFeature == aSketchFeature) {
+ aCanDisplay = false;
+ }
+ else if (aSketchFeature.get() && aSketchFeature->data().get() &&
+ aSketchFeature->data()->isValid()) {
+ for (int i = 0; i < aSketchFeature->numberOfSubs() && !aCanDisplay; i++) {
+ FeaturePtr aSubFeature = aSketchFeature->subFeature(i);
+ std::list<ResultPtr> aResults = aSubFeature->results();
+ std::list<ResultPtr>::const_iterator aIt;
+ for (aIt = aResults.begin(); aIt != aResults.end() && !aCanDisplay; ++aIt) {
+ if (theObject == (*aIt))
+ aCanDisplay = true;
+ }
+ if (aSubFeature == theObject)
+ aCanDisplay = true;
+ }
+ }
+ }
+ }
+ else {
+ aCanDisplay = ModuleBase_IModule::canDisplayObject(theObject);
+ }
+ return aCanDisplay;
}
-
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
+ if ((theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) &&
+ (theOperation->isEditOperation())) {
+ // we have to manually activate the sketch label in edit mode
+ aPanel->activateWidget(aPanel->modelWidgets().first());
+ return;
+ }
+
// Restart last operation type
if ((theOperation->id() == myLastOperationId) && myLastFeature) {
ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
if (aPoint) {
aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
- PartSet_Tools::setConstraints(myCurrentSketch, theOperation->feature(),
+ PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
aWgt->attributeID(), aPoint->x(), aPoint->y());
- theOperation->propertyPanel()->activateNextWidget(aPnt2dWgt);
+ aPanel->activateNextWidget(aPnt2dWgt);
}
}
}
} else {
// Start editing constraint
if (theOperation->isEditOperation()) {
+ // TODO: #391 - to be removed
std::string aId = theOperation->id().toStdString();
- if (sketchOperationIdList().contains(QString(aId.c_str()))) {
+ if (PartSet_SketcherMgr::sketchOperationIdList().contains(QString(aId.c_str()))) {
if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
(aId == SketchPlugin_ConstraintLength::ID()) ||
(aId == SketchPlugin_ConstraintDistance::ID())) {
void PartSet_Module::onSelectionChanged()
{
- // Editing of constraints can be done on selection
- ModuleBase_ISelection* aSelect = myWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
- if (aSelected.size() == 1) {
- ModuleBase_ViewerPrs aPrs = aSelected.first();
- ObjectPtr aObject = aPrs.object();
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
- if (aFeature) {
- std::string aId = aFeature->getKind();
- if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
- (aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
- editFeature(aFeature);
- }
- }
- }
-}
-
-void PartSet_Module::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
-{
- if (!(theEvent->buttons() & Qt::LeftButton))
- return;
-
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- // Use only for sketch operations
- if (aOperation && myCurrentSketch) {
- if (!PartSet_Tools::sketchPlane(myCurrentSketch))
- return;
-
- bool isSketcher = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
- bool isSketchOpe = sketchOperationIdList().contains(aOperation->id());
-
- // Avoid non-sketch operations
- if ((!isSketchOpe) && (!isSketcher))
- return;
-
- bool isEditing = aOperation->isEditOperation();
-
- // Ignore creation sketch operation
- if ((!isSketcher) && (!isEditing))
- return;
+ if (!aOperation)
+ return;
- if (theEvent->modifiers()) {
- // If user performs multiselection
- if (isSketchOpe && (!isSketcher))
- if (!aOperation->commit())
- aOperation->abort();
- return;
- }
- // Remember highlighted objects for editing
+ bool isSketcherOp = false;
+ // An edit operation is enable only if the current opeation is the sketch operation
+ if (mySketchMgr->activeSketch()) {
+ if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
+ isSketcherOp = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
+ }
+ if (isSketcherOp) {
+ // Editing of constraints can be done on selection
ModuleBase_ISelection* aSelect = myWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aHighlighted = aSelect->getHighlighted();
QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
- myEditingFeatures.clear();
- myEditingAttr.clear();
- if ((aHighlighted.size() == 0) && (aSelected.size() == 0)) {
- if (isSketchOpe && (!isSketcher))
- // commit previous operation
- if (!aOperation->commit())
- aOperation->abort();
- return;
- }
-
- QObjectPtrList aSelObjects = getSumList(aHighlighted, aSelected);
- if ((aHighlighted.size() == 1) && (aSelected.size() == 0)) {
- // Move by selected shape (vertex). Can be used only for single selection
- foreach(ModuleBase_ViewerPrs aPrs, aHighlighted) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aHighlighted.first().object());
- if (aFeature) {
- myEditingFeatures.append(aFeature);
- TopoDS_Shape aShape = aPrs.shape();
- if (!aShape.IsNull()) {
- if (aShape.ShapeType() == TopAbs_VERTEX) {
- AttributePtr aAttr = PartSet_Tools::findAttributeBy2dPoint(myEditingFeatures.first(),
- aShape, myCurrentSketch);
- if (aAttr)
- myEditingAttr.append(aAttr);
- }
- }
- }
- }
- } else {
- // Provide multi-selection. Can be used only for features
- foreach (ObjectPtr aObj, aSelObjects) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
- if (aFeature && (!myEditingFeatures.contains(aFeature)))
- myEditingFeatures.append(aFeature);
- }
-
- }
- // If nothing highlighted - return
- if (myEditingFeatures.size() == 0)
- return;
-
- if (isSketcher) {
- myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurX, myCurY);
- myDragDone = false;
- myWorkshop->viewer()->enableSelection(false);
- launchEditing();
-
- } else if (isSketchOpe && isEditing) {
- // If selected another object
- aOperation->abort();
-
- myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurX, myCurY);
- myDragDone = false;
- myWorkshop->viewer()->enableSelection(false);
-
- // This is necessary in order to finalize previous operation
- QApplication::processEvents();
- launchEditing();
- }
- }
-}
-
-
-void PartSet_Module::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
- double& theX, double& theY)
-{
- Handle(V3d_View) aView = theWnd->v3dView();
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, theX, theY);
-}
-
-
-void PartSet_Module::launchEditing()
-{
- if (myEditingFeatures.size() > 0) {
- FeaturePtr aFeature = myEditingFeatures.first();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
- editFeature(aSPFeature);
- }
- }
-}
-
-/// Returns new instance of operation object (used in createOperation for customization)
-ModuleBase_Operation* PartSet_Module::getNewOperation(const std::string& theFeatureId)
-{
- if (theFeatureId == PartSet_OperationSketch::Type()) {
- return new PartSet_OperationSketch(theFeatureId.c_str(), this);
- }
- return ModuleBase_IModule::getNewOperation(theFeatureId);
-}
-
-
-void PartSet_Module::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
-{
- myWorkshop->viewer()->enableSelection(true);
- if (myIsDragging) {
- myIsDragging = false;
- if (myDragDone) {
- myWorkshop->currentOperation()->commit();
- myEditingFeatures.clear();
- myEditingAttr.clear();
- }
- }
-}
-
-
-void PartSet_Module::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
-{
- if (myIsDragging) {
- ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- if (aOperation->id().toStdString() == SketchPlugin_Sketch::ID())
- return; // No edit operation activated
-
- static Events_ID anEvent = Events_Loop::eventByName(EVENT_OBJECT_MOVED);
- Handle(V3d_View) aView = theWnd->v3dView();
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
- double aX, aY;
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, aY);
- double dX = aX - myCurX;
- double dY = aY - myCurY;
-
- if ((aOperation->id().toStdString() == SketchPlugin_Line::ID()) &&
- (myEditingAttr.size() == 1) &&
- myEditingAttr.first()) {
- // probably we have prehighlighted point
- AttributePtr aAttr = myEditingAttr.first();
- std::string aAttrId = aAttr->id();
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- // Find corresponded widget to provide dragging
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- if (aWgt->attributeID() == aAttrId) {
- PartSet_WidgetPoint2D* aWgt2d = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aWgt2d) {
- aWgt2d->setPoint(aWgt2d->x() + dX, aWgt2d->y() + dY);
- break;
- }
- }
- }
- } else {
- foreach(FeaturePtr aFeature, myEditingFeatures) {
- std::shared_ptr<SketchPlugin_Feature> aSketchFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSketchFeature) {
- aSketchFeature->move(dX, dY);
- ModelAPI_EventCreator::get()->sendUpdated(aSketchFeature, anEvent);
+ if (aSelected.size() == 1) {
+ ModuleBase_ViewerPrs aPrs = aSelected.first();
+ ObjectPtr aObject = aPrs.object();
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
+ if (aFeature) {
+ std::string aId = aFeature->getKind();
+ if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
+ (aId == SketchPlugin_ConstraintLength::ID()) ||
+ (aId == SketchPlugin_ConstraintDistance::ID())) {
+ editFeature(aFeature);
}
}
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_MOVED));
- Events_Loop::loop()->flush(Events_Loop::eventByName(EVENT_OBJECT_UPDATED));
}
- myDragDone = true;
- myCurX = aX;
- myCurY = aY;
- }
+ }
}
void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
myRestartingMode = RM_EmptyFeatureUsed;
}
+void PartSet_Module::onOperationActivatedByPreselection()
+{
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (!aOperation)
+ return;
+
+ // Set final definitions if they are necessary
+ //propertyPanelDefined(aOperation);
+
+ /// Commit sketcher operations automatically
+ FeaturePtr aFeature = aOperation->feature();
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ if (aSPFeature) {
+ aOperation->commit();
+ }
+}
+
void PartSet_Module::onNoMoreWidgets()
{
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
}
}
-QStringList PartSet_Module::sketchOperationIdList() const
-{
- QStringList aIds;
- aIds << SketchPlugin_Line::ID().c_str();
- aIds << SketchPlugin_Point::ID().c_str();
- aIds << SketchPlugin_Arc::ID().c_str();
- aIds << SketchPlugin_Circle::ID().c_str();
- aIds << SketchPlugin_ConstraintLength::ID().c_str();
- aIds << SketchPlugin_ConstraintDistance::ID().c_str();
- aIds << SketchPlugin_ConstraintRigid::ID().c_str();
- aIds << SketchPlugin_ConstraintRadius::ID().c_str();
- aIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
- aIds << SketchPlugin_ConstraintParallel::ID().c_str();
- return aIds;
-}
-
-void PartSet_Module::onVertexSelected(ObjectPtr theObject, const TopoDS_Shape& theShape)
+void PartSet_Module::onVertexSelected()
{
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
PartSet_WidgetSketchLabel* aWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
aWgt->setWorkshop(aWorkshop);
connect(aWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
- this, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
+ mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
theModelWidgets.append(aWgt);
return aWgt->getControl();
} else if (theType == "sketch-2dpoint_selector") {
PartSet_WidgetPoint2D* aWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(myCurrentSketch);
+ aWgt->setSketch(mySketchMgr->activeSketch());
- connect(aWgt, SIGNAL(vertexSelected(ObjectPtr, const TopoDS_Shape&)),
- this, SLOT(onVertexSelected(ObjectPtr, const TopoDS_Shape&)));
+ connect(aWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
theModelWidgets.append(aWgt);
return aWgt->getControl();
} if (theType == "point2ddistance") {
PartSet_WidgetPoint2dDistance* aWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(myCurrentSketch);
+ aWgt->setSketch(mySketchMgr->activeSketch());
theModelWidgets.append(aWgt);
return aWgt->getControl();
} if (theType == "sketch_shape_selector") {
PartSet_WidgetShapeSelector* aWgt =
new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(myCurrentSketch);
+ aWgt->setSketcher(mySketchMgr->activeSketch());
theModelWidgets.append(aWgt);
return aWgt->getControl();
} if (theType == "sketch_constraint_shape_selector") {
PartSet_WidgetConstraintShapeSelector* aWgt =
new PartSet_WidgetConstraintShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(myCurrentSketch);
+ aWgt->setSketcher(mySketchMgr->activeSketch());
theModelWidgets.append(aWgt);
return aWgt->getControl();
- }else
+ } else
return 0;
}
+
