+// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
+
#include "PartSet_Module.h"
-//#include <PartSet_OperationSketch.h>
-//#include <PartSet_OperationFeatureCreate.h>
-//#include <PartSet_OperationFeatureEdit.h>
-//#include <PartSet_Listener.h>
-//#include <PartSet_TestOCC.h>
-#include "PartSet_WidgetSketchLabel.h"
-#include "PartSet_Validators.h"
-#include "PartSet_Tools.h"
-#include "PartSet_WidgetPoint2D.h"
-#include "PartSet_WidgetPoint2dDistance.h"
-#include "PartSet_WidgetShapeSelector.h"
+#include <PartSet_WidgetSketchLabel.h>
+#include <PartSet_Validators.h>
+#include <PartSet_Tools.h>
+#include <PartSet_WidgetPoint2d.h>
+#include <PartSet_WidgetPoint2dDistance.h>
+#include <PartSet_WidgetShapeSelector.h>
+#include <PartSet_SketcherMgr.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IViewWindow.h>
#include <ModuleBase_IPropertyPanel.h>
-//#include <ModuleBase_OperationDescription.h>
-//#include <ModuleBase_WidgetFactory.h>
+#include <ModuleBase_WidgetEditor.h>
+#include <ModuleBase_FilterFactory.h>
+#include <ModuleBase_FilterLinearEdge.h>
+#include <ModuleBase_FilterFace.h>
+#include <ModuleBase_FilterMulti.h>
+#include <ModuleBase_FilterCustom.h>
+#include <ModuleBase_FilterNoConsructionSubShapes.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Events.h>
#include <GeomDataAPI_Point.h>
#include <GeomDataAPI_Dir.h>
-#include <XGUI_MainWindow.h>
#include <XGUI_Displayer.h>
-#include <XGUI_Viewer.h>
#include <XGUI_Workshop.h>
#include <XGUI_OperationMgr.h>
-#include <XGUI_ViewPort.h>
-#include <XGUI_ActionsMgr.h>
-#include <XGUI_ViewerProxy.h>
-#include <XGUI_ContextMenuMgr.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ModuleConnector.h>
#include <XGUI_Tools.h>
-#include <SketchPlugin_Line.h>
+#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
-#include <SketchPlugin_Point.h>
-#include <SketchPlugin_Arc.h>
-#include <SketchPlugin_Circle.h>
+#include <SketchPlugin_Line.h>
+//#include <SketchPlugin_Arc.h>
+//#include <SketchPlugin_Circle.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
-#include <SketchPlugin_ConstraintRigid.h>
+//#include <SketchPlugin_ConstraintRigid.h>
-//#include <Config_PointerMessage.h>
-//#include <Config_ModuleReader.h>
-//#include <Config_WidgetReader.h>
-//#include <Events_Loop.h>
-//#include <Events_Message.h>
-//#include <Events_Error.h>
-
-//#include <GeomAPI_Shape.h>
-//#include <GeomAPI_AISObject.h>
-//#include <AIS_Shape.hxx>
-//#include <AIS_DimensionSelectionMode.hxx>
+#include <Events_Loop.h>
#include <StdSelect_TypeOfFace.hxx>
+#include <TopoDS_Vertex.hxx>
+#include <TopoDS.hxx>
+#include <TopoDS_Shape.hxx>
+#include <BRep_Tool.hxx>
#include <QObject>
#include <QMouseEvent>
#include <QString>
#include <QTimer>
+#include <QApplication>
+#include <QMessageBox>
+#include <QMainWindow>
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomDataAPI_Dir.h>
#include <QDebug>
#endif
-
/*!Create and return new instance of XGUI_Module*/
extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
{
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
: ModuleBase_IModule(theWshop),
- myIsDragging(false), myRestartingMode(true), myDragDone(false)
+ myRestartingMode(RM_None)
{
//myWorkshop = dynamic_cast<XGUI_Workshop*>(theWshop);
- ModuleBase_IViewer* aViewer = aViewer = theWshop->viewer();
- connect(aViewer, SIGNAL(mousePress(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMousePressed(ModuleBase_IViewWindow*, QMouseEvent*)));
+ mySketchMgr = new PartSet_SketcherMgr(this);
- connect(aViewer, SIGNAL(mouseRelease(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMouseReleased(ModuleBase_IViewWindow*, QMouseEvent*)));
-
- connect(aViewer, SIGNAL(mouseMove(ModuleBase_IViewWindow*, QMouseEvent*)),
- this, SLOT(onMouseMoved(ModuleBase_IViewWindow*, QMouseEvent*)));
-
- //myListener = new PartSet_Listener(this);
-
-// connect(myWorkshop, SIGNAL(operationStarted(ModuleBase_Operation*)),
-// this, SLOT(onOperationStarted(ModuleBase_Operation*)));
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
-// connect(myWorkshop, SIGNAL(operationStopped(ModuleBase_Operation*)), this,
-// SLOT(onOperationStopped(ModuleBase_Operation*)));
+ XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
+ connect(anOpMgr, SIGNAL(keyEnterReleased()), this, SLOT(onEnterReleased()));
+ connect(anOpMgr, SIGNAL(operationActivatedByPreselection()),
+ this, SLOT(onOperationActivatedByPreselection()));
- //XGUI_Workshop* aXWshop = xWorkshop();
- //XGUI_ContextMenuMgr* aContextMenuMgr = aXWshop->contextMenuMgr();
- //connect(aContextMenuMgr, SIGNAL(actionTriggered(const QString&, bool)), this,
- // SLOT(onContextMenuCommand(const QString&, bool)));
+ ModuleBase_IViewer* aViewer = theWshop->viewer();
+ connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
+ this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
+ createActions();
}
PartSet_Module::~PartSet_Module()
{
+ if (!myDocumentShapeFilter.IsNull())
+ myDocumentShapeFilter.Nullify();
}
void PartSet_Module::registerValidators()
aFactory->registerValidator("PartSet_PerpendicularValidator", new PartSet_PerpendicularValidator);
aFactory->registerValidator("PartSet_ParallelValidator", new PartSet_ParallelValidator);
aFactory->registerValidator("PartSet_RadiusValidator", new PartSet_RadiusValidator);
+ aFactory->registerValidator("PartSet_RigidValidator", new PartSet_RigidValidator);
+ aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
+ aFactory->registerValidator("PartSet_SketchValidator", new PartSet_SketchValidator);
}
+void PartSet_Module::registerFilters()
+{
+ //Registering of selection filters
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
+
+ aFactory->registerFilter("EdgeFilter", new ModuleBase_FilterLinearEdge);
+ aFactory->registerFilter("FaceFilter", new ModuleBase_FilterFace);
+ aFactory->registerFilter("MultiFilter", new ModuleBase_FilterMulti);
+ Handle(SelectMgr_Filter) aSelectFilter = new ModuleBase_FilterNoConsructionSubShapes(workshop());
+ aFactory->registerFilter("NoConstructionSubShapesFilter",
+ new ModuleBase_FilterCustom(aSelectFilter));
+}
-void PartSet_Module::onOperationComitted(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
{
if (theOperation->isEditOperation())
return;
+ // the selection is cleared after commit the create operation
+ // in order to do not use the same selected objects in the restarted operation
+ // for common behaviour, the selection is cleared even if the operation is not restarted
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
+ if (!aContext.IsNull())
+ aContext->ClearSelected();
+
/// Restart sketcher operations automatically
FeaturePtr aFeature = theOperation->feature();
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature && myRestartingMode) {
+ if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
+ myRestartingMode == RM_EmptyFeatureUsed)) {
myLastOperationId = theOperation->id();
- myLastFeature = theOperation->feature();
+ myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
+
launchOperation(myLastOperationId);
- } else {
- breakOperationSequence();
}
+ breakOperationSequence();
}
void PartSet_Module::breakOperationSequence()
{
myLastOperationId = "";
myLastFeature = FeaturePtr();
- myRestartingMode = false;
-
+ myRestartingMode = RM_None;
}
-void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
{
breakOperationSequence();
}
-void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
- myRestartingMode = true;
if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
- // Display all sketcher sub-Objects
- myCurrentSketch = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(theOperation->feature());
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
-
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);
- std::list<ResultPtr> aResults = aFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->display((*aIt), false);
- }
- aDisplayer->display(aFeature);
- }
- // Hide sketcher result
- std::list<ResultPtr> aResults = myCurrentSketch->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->erase((*aIt), false);
- }
- aDisplayer->erase(myCurrentSketch);
+ mySketchMgr->startSketch(theOperation);
}
+ if (myDocumentShapeFilter.IsNull())
+ myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
+ myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
}
-void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
+void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
{
if (theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
- // Hide all sketcher sub-Objects
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
-
- for (int i = 0; i < myCurrentSketch->numberOfSubs(); i++) {
- FeaturePtr aFeature = myCurrentSketch->subFeature(i);
- std::list<ResultPtr> aResults = aFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->erase((*aIt), false);
+ mySketchMgr->stopSketch(theOperation);
+ }
+ myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
+}
+
+bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
+{
+ bool aCanDisplay = false;
+ if (mySketchMgr->activeSketch()) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+
+ if (aFeature.get() != NULL) {
+ if (aFeature == mySketchMgr->activeSketch()) {
+ aCanDisplay = false;
+ }
+ else {
+ aCanDisplay = mySketchMgr->sketchOperationIdList().contains(aFeature->getKind().c_str());
}
- aDisplayer->erase(aFeature, false);
}
- // Display sketcher result
- std::list<ResultPtr> aResults = myCurrentSketch->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
- aDisplayer->display((*aIt), false);
+ }
+ else {
+ aCanDisplay = ModuleBase_IModule::canDisplayObject(theObject);
+ }
+ return aCanDisplay;
+
+void PartSet_Module::addViewerItems(QMenu* theMenu) const
+{
+ if (!isSketchOperationActive() && !isSketchFeatureOperationActive())
+ return;
+ ModuleBase_ISelection* aSelection = myWorkshop->selection();
+ QObjectPtrList aObjects = aSelection->selectedPresentations();
+ if (aObjects.size() > 0) {
+ bool hasFeature = false;
+ foreach(ObjectPtr aObject, aObjects)
+ {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
+ if (aFeature.get() != NULL) {
+ hasFeature = true;
+ }
}
- aDisplayer->display(myCurrentSketch);
-
- myCurrentSketch = CompositeFeaturePtr();
+ if (hasFeature)
+ theMenu->addAction(action("DELETE_PARTSET_CMD"));
}
}
-
-
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
+ ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
+ if ((theOperation->id().toStdString() == SketchPlugin_Sketch::ID()) &&
+ (theOperation->isEditOperation())) {
+ // we have to manually activate the sketch label in edit mode
+ aPanel->activateWidget(aPanel->modelWidgets().first());
+ return;
+ }
+
+ // Restart last operation type
if ((theOperation->id() == myLastOperationId) && myLastFeature) {
- ModuleBase_ModelWidget* aWgt = theOperation->propertyPanel()->activeWidget();
+ ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
+ // Initialise new line with first point equal to end of previous
PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
if (aPnt2dWgt) {
std::shared_ptr<ModelAPI_Data> aData = myLastFeature->data();
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
if (aPoint) {
aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
- PartSet_Tools::setConstraints(myCurrentSketch, theOperation->feature(),
- SketchPlugin_Line::START_ID(), aPoint->x(), aPoint->y());
- theOperation->propertyPanel()->activateNextWidget(aPnt2dWgt);
+ PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
+ aWgt->attributeID(), aPoint->x(), aPoint->y());
+ aPanel->activateNextWidget(aPnt2dWgt);
}
}
}
+ } else {
+ // Start editing constraint
+ if (theOperation->isEditOperation()) {
+ // TODO: #391 - to be removed
+ std::string aId = theOperation->id().toStdString();
+ if (PartSet_SketcherMgr::sketchOperationIdList().contains(QString(aId.c_str()))) {
+ if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
+ (aId == SketchPlugin_ConstraintLength::ID()) ||
+ (aId == SketchPlugin_ConstraintDistance::ID())) {
+ // Find and activate widget for management of point for dimension line position
+ QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
+ foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
+ PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
+ if (aPntWgt) {
+ aPanel->activateWidget(aPntWgt);
+ return;
+ }
+ }
+ }
+ }
+ }
}
}
void PartSet_Module::onSelectionChanged()
{
- // Activate edit operation for sketcher objects
- //ModuleBase_ISelection* aSelect = myWorkshop->selection();
- //QObjectPtrList aObjects = aSelect->selectedPresentations();
- //if (aObjects.size() == 1) {
- // FeaturePtr aFeature = ModelAPI_Feature::feature(aObjects.first());
- // if (aFeature) {
- // std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- // std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- // if (aSPFeature) {
- // editFeature(aSPFeature);
- // }
- // }
- //}
-}
-
-//ModuleBase_Operation* PartSet_Module::getNewOperation(const std::string& theFeatureId)
-//{
-// ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
-// if (aOperation) {
-// // If the current operation is sketcher sub-operation then we have to create
-// // Costomized operation
-// if (aOperation->id().toStdString() == SketchPlugin_Sketch::ID()) {
-// PartSet_Operation* aPSOp = new PartSet_Operation(theFeatureId.c_str(), this);
-// aPSOp->setWorkshop(myWorkshop);
-// connect(myWorkshop, SIGNAL(selectionChanged()), aPSOp, SLOT(onSelectionChanged()));
-// return aPSOp;
-// }
-// }
-// return ModuleBase_IModule::getNewOperation(theFeatureId);
-//}
-
-
-void PartSet_Module::onMousePressed(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
-{
- if (!(theEvent->buttons() & Qt::LeftButton))
- return;
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- // Use only for sketch operations
- if (aOperation && myCurrentSketch) {
- if (!PartSet_Tools::sketchPlane(myCurrentSketch))
- return;
-
- bool isSketcher = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
- bool isSketchOpe = sketchOperationIdList().contains(aOperation->id());
-
- // Avoid non-sketch operations
- if ((!isSketchOpe) && (!isSketcher))
- return;
-
- bool isEditing = aOperation->isEditOperation();
-
- // Ignore creation sketch operation
- if ((!isSketcher) && (!isEditing))
- return;
+ if (!aOperation)
+ return;
- // Remember highlighted objects for editing
+ bool isSketcherOp = false;
+ // An edit operation is enable only if the current opeation is the sketch operation
+ if (mySketchMgr->activeSketch()) {
+ if (PartSet_Tools::sketchPlane(mySketchMgr->activeSketch()))
+ isSketcherOp = (aOperation->id().toStdString() == SketchPlugin_Sketch::ID());
+ }
+ if (isSketcherOp) {
+ // Editing of constraints can be done on selection
ModuleBase_ISelection* aSelect = myWorkshop->selection();
- QList<ModuleBase_ViewerPrs> aObjects = aSelect->getHighlighted();
- myEditingFeatures.clear();
- if (aObjects.size() > 0) {
- foreach(ModuleBase_ViewerPrs aPrs, aObjects) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(aObjects.first().object());
- if (aFeature)
- myEditingFeatures.append(aFeature);
+ QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
+ if (aSelected.size() == 1) {
+ ModuleBase_ViewerPrs aPrs = aSelected.first();
+ ObjectPtr aObject = aPrs.object();
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObject);
+ if (aFeature) {
+ std::string aId = aFeature->getKind();
+ if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
+ (aId == SketchPlugin_ConstraintLength::ID()) ||
+ (aId == SketchPlugin_ConstraintDistance::ID())) {
+ editFeature(aFeature);
+ }
}
- }
- // If nothing highlighted - return
- if (myEditingFeatures.size() == 0)
- return;
-
- if (isSketcher) {
- CompositeFeaturePtr aSketch =
- std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aOperation->feature());
- if (!PartSet_Tools::sketchPlane(aSketch))
- return;
-
- //myCurrentSketch = aOperation->feature();
- myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurX, myCurY);
- myDragDone = false;
- myWorkshop->viewer()->enableSelection(false);
-
- launchEditing();
-
- } else if (isSketchOpe && isEditing) {
- aOperation->abort();
-
- //myCurrentSketch = aOperation->parentFeature();
- myIsDragging = true;
- get2dPoint(theWnd, theEvent, myCurX, myCurY);
- myDragDone = false;
- myWorkshop->viewer()->enableSelection(false);
-
- QTimer::singleShot(10, this, SLOT(launchEditing()));
}
- }
+ }
}
-
-void PartSet_Module::get2dPoint(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent,
- double& theX, double& theY)
+void PartSet_Module::onKeyRelease(ModuleBase_IViewWindow* theWnd, QKeyEvent* theEvent)
{
- Handle(V3d_View) aView = theWnd->v3dView();
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, theX, theY);
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
+ anOpMgr->onKeyReleased(theEvent);
}
-
-void PartSet_Module::launchEditing()
+void PartSet_Module::onEnterReleased()
{
- if (myEditingFeatures.size() == 1) {
- FeaturePtr aFeature = myEditingFeatures.first();
- std::shared_ptr<SketchPlugin_Feature> aSPFeature =
- std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
- if (aSPFeature) {
- editFeature(aSPFeature);
- }
- }
+ myRestartingMode = RM_EmptyFeatureUsed;
}
-void PartSet_Module::onMouseReleased(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+void PartSet_Module::onOperationActivatedByPreselection()
{
- if (myIsDragging) {
- myIsDragging = false;
- myWorkshop->viewer()->enableSelection(true);
- if (myDragDone)
- myWorkshop->currentOperation()->commit();
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if(aOperation && isSketchFeatureOperationActive()) {
+ // Set final definitions if they are necessary
+ //propertyPanelDefined(aOperation);
+
+ /// Commit sketcher operations automatically
+ aOperation->commit();
}
}
-
-void PartSet_Module::onMouseMoved(ModuleBase_IViewWindow* theWnd, QMouseEvent* theEvent)
+void PartSet_Module::onNoMoreWidgets()
{
- if (myIsDragging) {
- Handle(V3d_View) aView = theWnd->v3dView();
- gp_Pnt aPoint = PartSet_Tools::convertClickToPoint(theEvent->pos(), aView);
- double aX, aY;
- PartSet_Tools::convertTo2D(aPoint, myCurrentSketch, aView, aX, aY);
- double dX = myCurX - aX;
- double dY = myCurY - aY;
-
+ if (isSketchFeatureOperationActive()) {
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
- ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- foreach(ModuleBase_ModelWidget* aWgt, aWidgets) {
- PartSet_WidgetPoint2D* aWgt2d = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aWgt2d) {
- aWgt2d->setPoint(aWgt2d->x() - dX, aWgt2d->y() - dY);
- }
+ if (aOperation) {
+ if (myRestartingMode != RM_Forbided)
+ myRestartingMode = RM_LastFeatureUsed;
+ aOperation->commit();
}
- myDragDone = true;
- myCurX = aX;
- myCurY = aY;
}
}
-
-QStringList PartSet_Module::sketchOperationIdList() const
-{
- QStringList aIds;
- aIds << SketchPlugin_Line::ID().c_str();
- aIds << SketchPlugin_Point::ID().c_str();
- aIds << SketchPlugin_Arc::ID().c_str();
- aIds << SketchPlugin_Circle::ID().c_str();
- aIds << SketchPlugin_ConstraintLength::ID().c_str();
- aIds << SketchPlugin_ConstraintDistance::ID().c_str();
- aIds << SketchPlugin_ConstraintRigid::ID().c_str();
- aIds << SketchPlugin_ConstraintRadius::ID().c_str();
- aIds << SketchPlugin_ConstraintPerpendicular::ID().c_str();
- aIds << SketchPlugin_ConstraintParallel::ID().c_str();
- return aIds;
-}
-
-void PartSet_Module::onVertexSelected(ObjectPtr theObject, const TopoDS_Shape& theShape)
+void PartSet_Module::onVertexSelected()
{
ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
if (aWidgets.last() == aPanel->activeWidget()) {
- breakOperationSequence();
- PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aPanel->activeWidget());
- PartSet_Tools::setConstraints(myCurrentSketch, aOperation->feature(),
- SketchPlugin_Line::END_ID(), aPnt2dWgt->x(), aPnt2dWgt->y());
+ myRestartingMode = RM_Forbided;
}
}
}
-
-//void PartSet_Module::featureCreated(QAction* theFeature)
-//{
-// connect(theFeature, SIGNAL(triggered(bool)), this, SLOT(onFeatureTriggered()));
-//}
-
-//std::string PartSet_Module::featureFile(const std::string& theFeatureId)
-//{
-// return myFeaturesInFiles[theFeatureId];
-//}
-
-/*
- *
- */
-//void PartSet_Module::onFeatureTriggered()
-//{
-// QAction* aCmd = dynamic_cast<QAction*>(sender());
-// //Do nothing on uncheck
-// if (aCmd->isCheckable() && !aCmd->isChecked())
-// return;
-// launchOperation(aCmd->data().toString());
-//}
-
-
-//void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
-//{
-// XGUI_Workshop* aXWshp = xWorkshop();
-// XGUI_Displayer* aDisplayer = aXWshp->displayer();
-// PartSet_OperationSketchBase* aPreviewOp = dynamic_cast<PartSet_OperationSketchBase*>(theOperation);
-// if (aPreviewOp) {
-// XGUI_PropertyPanel* aPropPanel = aXWshp->propertyPanel();
-// connect(aPropPanel, SIGNAL(storedPoint2D(ObjectPtr, const std::string&)), this,
-// SLOT(onStorePoint2D(ObjectPtr, const std::string&)), Qt::UniqueConnection);
-//
-// //aDisplayer->deactivateObjectsOutOfContext();
-// PartSet_OperationSketch* aSketchOp = dynamic_cast<PartSet_OperationSketch*>(aPreviewOp);
-// if (aSketchOp) {
-// if (aSketchOp->isEditOperation()) {
-// setSketchingMode(getSketchPlane(aSketchOp->feature()));
-// } else {
-// aDisplayer->openLocalContext();
-// aDisplayer->activateObjectsOutOfContext(QIntList());
-// myPlaneFilter = new StdSelect_FaceFilter(StdSelect_Plane);
-// aDisplayer->addSelectionFilter(myPlaneFilter);
-// QIntList aModes = sketchSelectionModes(aPreviewOp->feature());
-// aDisplayer->setSelectionModes(aModes);
-// }
-// }
-// }
-//}
-
-//void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
-//{
-// if (!theOperation)
-// return;
-// XGUI_Workshop* aXWshp = xWorkshop();
-// XGUI_Displayer* aDisplayer = aXWshp->displayer();
-// PartSet_OperationSketchBase* aPreviewOp = dynamic_cast<PartSet_OperationSketchBase*>(theOperation);
-// if (aPreviewOp) {
-// XGUI_PropertyPanel* aPropPanel = aXWshp->propertyPanel();
-//
-// PartSet_OperationSketch* aSketchOp = dynamic_cast<PartSet_OperationSketch*>(aPreviewOp);
-// if (aSketchOp) {
-// aDisplayer->closeLocalContexts();
-// } else {
-// PartSet_OperationFeatureCreate* aCreationOp =
-// dynamic_cast<PartSet_OperationFeatureCreate*>(aPreviewOp);
-// if (aCreationOp) {
-// // Activate just created object for selection
-// FeaturePtr aFeature = aCreationOp->feature();
-// QIntList aModes = sketchSelectionModes(aFeature);
-// const std::list<ResultPtr>& aResults = aFeature->results();
-// std::list<ResultPtr>::const_iterator anIt, aLast = aResults.end();
-// for (anIt = aResults.begin(); anIt != aLast; anIt++) {
-// aDisplayer->activate(*anIt, aModes);
-// }
-// aDisplayer->activate(aFeature, aModes);
-// aDisplayer->clearSelected();
-// }
-// }
-// }// else {
-// // Activate results of current feature for selection
-// //FeaturePtr aFeature = theOperation->feature();
-// //XGUI_Displayer* aDisplayer = aXWshp->displayer();
-// //std::list<ResultPtr> aResults = aFeature->results();
-// //std::list<ResultPtr>::const_iterator aIt;
-// //for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
-// // aDisplayer->activate(*aIt);
-// //}
-// //}
-//}
-
-//void PartSet_Module::onContextMenuCommand(const QString& theId, bool isChecked)
-//{
-// QList<ObjectPtr> aFeatures = workshop()->selection()->selectedObjects();
-// if (theId == "EDIT_CMD" && (aFeatures.size() > 0)) {
-// FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aFeatures.first());
-// if (aFeature)
-// editFeature(aFeature);
-// }
-//}
-
-//void PartSet_Module::onMousePressed(QMouseEvent* theEvent)
-//{
-// XGUI_Workshop* aXWshp = xWorkshop();
-// PartSet_OperationSketchBase* aPreviewOp =
-// dynamic_cast<PartSet_OperationSketchBase*>(workshop()->currentOperation());
-// if (aPreviewOp) {
-// ModuleBase_ISelection* aSelection = workshop()->selection();
-// aPreviewOp->mousePressed(theEvent, myWorkshop->viewer(), aSelection);
-// }
-//}
-
-//void PartSet_Module::onMouseReleased(QMouseEvent* theEvent)
-//{
-// PartSet_OperationSketchBase* aPreviewOp =
-// dynamic_cast<PartSet_OperationSketchBase*>(myWorkshop->currentOperation());
-// if (aPreviewOp) {
-// ModuleBase_ISelection* aSelection = workshop()->selection();
-// // Initialise operation with preliminary selection
-// aPreviewOp->mouseReleased(theEvent, myWorkshop->viewer(), aSelection);
-// }
-//}
-
-//void PartSet_Module::onMouseMoved(QMouseEvent* theEvent)
-//{
-// PartSet_OperationSketchBase* aPreviewOp =
-// dynamic_cast<PartSet_OperationSketchBase*>(myWorkshop->currentOperation());
-// if (aPreviewOp)
-// aPreviewOp->mouseMoved(theEvent, myWorkshop->viewer());
-//}
-
-//void PartSet_Module::onKeyRelease(QKeyEvent* theEvent)
-//{
-// ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
-// PartSet_OperationSketchBase* aPreviewOp = dynamic_cast<PartSet_OperationSketchBase*>(anOperation);
-// if (aPreviewOp) {
-// aPreviewOp->keyReleased(theEvent->key());
-// }
-//}
-
-//void PartSet_Module::onMouseDoubleClick(QMouseEvent* theEvent)
-//{
-// PartSet_OperationSketchBase* aPreviewOp =
-// dynamic_cast<PartSet_OperationSketchBase*>(myWorkshop->currentOperation());
-// Handle(V3d_View) aView = myWorkshop->viewer()->activeView();
-// if (aPreviewOp && (!aView.IsNull())) {
-// ModuleBase_ISelection* aSelection = workshop()->selection();
-// // Initialise operation with preliminary selection
-// aPreviewOp->mouseDoubleClick(theEvent, aView, aSelection);
-// }
-//}
-
-//void PartSet_Module::onPlaneSelected(double theX, double theY, double theZ)
-//{
-// myWorkshop->viewer()->setViewProjection(theX, theY, theZ);
-//}
-
-//void PartSet_Module::onSketchLaunched()
-//{
-// xWorkshop()->actionsMgr()->update();
-// // Set working plane
-// ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
-// FeaturePtr aSketch = anOperation->feature();
-// setSketchingMode(getSketchPlane(aSketch));
-//}
-
-//void PartSet_Module::onFitAllView()
-//{
-// myWorkshop->viewer()->fitAll();
-//}
-
-//void PartSet_Module::onRestartOperation(std::string theName, ObjectPtr theObject)
-//{
-// FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
-//
-// std::string aKind = aFeature ? aFeature->getKind() : "";
-// ModuleBase_Operation* anOperation = createOperation(theName, aKind);
-//
-// PartSet_OperationSketchBase* aSketchOp = dynamic_cast<PartSet_OperationSketchBase*>(anOperation);
-// if (aSketchOp) {
-// PartSet_OperationFeatureCreate* aCreateOp = dynamic_cast<PartSet_OperationFeatureCreate*>(anOperation);
-// if (aCreateOp)
-// aCreateOp->initFeature(aFeature);
-// else {
-// anOperation->setFeature(aFeature);
-// }
-// ModuleBase_ISelection* aSelection = workshop()->selection();
-// // Initialise operation with preliminary selection
-// aSketchOp->initSelection(aSelection, myWorkshop->viewer());
-// } else if (aFeature) { // In case of edit operation: set the previously created feature to the operation
-// anOperation->setFeature(aFeature);
-// ////Deactivate result of current feature in order to avoid its selection
-// XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
-// std::list<ResultPtr> aResults = aFeature->results();
-// std::list<ResultPtr>::const_iterator aIt;
-// for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt) {
-// aDisplayer->deactivate(*aIt);
-// }
-// }
-// sendOperation(anOperation);
-// xWorkshop()->actionsMgr()->updateCheckState();
-//}
-
-//void PartSet_Module::onMultiSelectionEnabled(bool theEnabled)
-//{
-// ModuleBase_IViewer* aViewer = myWorkshop->viewer();
-// aViewer->enableMultiselection(theEnabled);
-//}
-
-//void PartSet_Module::onStopSelection(const QList<ObjectPtr>& theFeatures, const bool isStop)
-//{
-// XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
-// //if (!isStop) {
-// // foreach(ObjectPtr aObject, theFeatures) {
-// // activateFeature(aObject);
-// // }
-// //}
-// aDisplayer->stopSelection(theFeatures, isStop, false);
-//
-// ModuleBase_IViewer* aViewer = myWorkshop->viewer();
-// aViewer->enableSelection(!isStop);
-//
-// aDisplayer->updateViewer();
-//}
-
-//void PartSet_Module::onSetSelection(const QList<ObjectPtr>& theFeatures)
-//{
-// XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
-// aDisplayer->setSelected(theFeatures, false);
-// aDisplayer->updateViewer();
-//}
-
-//void PartSet_Module::setSketchingMode(const gp_Pln& thePln)
-//{
-// XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
-// if (!myPlaneFilter.IsNull()) {
-// aDisplayer->removeSelectionFilter(myPlaneFilter);
-// myPlaneFilter.Nullify();
-// }
-// QIntList aModes;
-// // Clear standard selection modes
-// aDisplayer->setSelectionModes(aModes);
-// aDisplayer->openLocalContext();
-//
-// // Set filter
-// mySketchFilter = new ModuleBase_ShapeInPlaneFilter(thePln);
-// aDisplayer->addSelectionFilter(mySketchFilter);
-//
-// // Get default selection modes
-// aModes = sketchSelectionModes(ObjectPtr());
-// aDisplayer->activateObjectsOutOfContext(aModes);
-//}
-
-//void PartSet_Module::onFeatureConstructed(ObjectPtr theFeature, int theMode)
-//{
-// bool isDisplay = theMode != PartSet_OperationSketchBase::FM_Hide;
-// ModuleBase_Operation* aCurOperation = myWorkshop->currentOperation();
-// PartSet_OperationSketchBase* aPrevOp = dynamic_cast<PartSet_OperationSketchBase*>(aCurOperation);
-// if (aPrevOp) {
-// std::list<FeaturePtr> aList = aPrevOp->subFeatures();
-// XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
-// QIntList aModes = sketchSelectionModes(aPrevOp->feature());
-// std::list<FeaturePtr>::iterator aSFIt;
-// for (aSFIt = aList.begin(); aSFIt != aList.end(); ++aSFIt) {
-// std::list<ResultPtr> aResults = (*aSFIt)->results();
-// std::list<ResultPtr>::iterator aIt;
-// for (aIt = aResults.begin(); aIt != aResults.end(); ++aIt) {
-// if (!isDisplay)
-// aDisplayer->erase((*aIt), false);
-// }
-// if (!isDisplay)
-// aDisplayer->erase((*aSFIt), false);
-// }
-// //aDisplayer->deactivateObjectsOutOfContext();
-// }
-// if (isDisplay)
-// ModelAPI_EventCreator::get()->sendUpdated(
-// theFeature, Events_Loop::loop()->eventByName(EVENT_OBJECT_TO_REDISPLAY));
-//}
-
-//ModuleBase_Operation* PartSet_Module::createOperation(const std::string& theCmdId,
-// const std::string& theFeatureKind)
-//{
-// // create the operation
-// ModuleBase_Operation* anOperation = 0;
-// if (theCmdId == PartSet_OperationSketch::Type()) {
-// anOperation = new PartSet_OperationSketch(theCmdId.c_str(), this);
-// } else {
-// ModuleBase_Operation* aCurOperation = myWorkshop->currentOperation();
-// CompositeFeaturePtr aSketch;
-// PartSet_OperationSketchBase* aPrevOp = dynamic_cast<PartSet_OperationSketchBase*>(aCurOperation);
-// if (aPrevOp) {
-// aSketch = aPrevOp->sketch();
-// }
-// if (PartSet_OperationFeatureCreate::canProcessKind(theCmdId)) {
-// anOperation = new PartSet_OperationFeatureCreate(theCmdId.c_str(), this, aSketch);
-// } else if (theCmdId == PartSet_OperationFeatureEdit::Type()) {
-// anOperation = new PartSet_OperationFeatureEdit(theCmdId.c_str(), this, aSketch);
-// }
-// }
-//
-// if (!anOperation) {
-// anOperation = new ModuleBase_Operation(theCmdId.c_str(), this);
-// }
-//
-// // set operation description and list of widgets corresponding to the feature xml definition
-// std::string aFeatureKind = theFeatureKind.empty() ? theCmdId : theFeatureKind;
-//
-// std::string aPluginFileName = featureFile(aFeatureKind);
-// Config_WidgetReader aWdgReader = Config_WidgetReader(aPluginFileName);
-// aWdgReader.readAll();
-// std::string aXmlCfg = aWdgReader.featureWidgetCfg(aFeatureKind);
-// std::string aDescription = aWdgReader.featureDescription(aFeatureKind);
-//
-// anOperation->getDescription()->setDescription(QString::fromStdString(aDescription));
-// anOperation->getDescription()->setXmlRepresentation(QString::fromStdString(aXmlCfg));
-//
-// // connect the operation
-// PartSet_OperationSketchBase* aPreviewOp = dynamic_cast<PartSet_OperationSketchBase*>(anOperation);
-// if (aPreviewOp) {
-// connect(aPreviewOp, SIGNAL(featureConstructed(ObjectPtr, int)), this,
-// SLOT(onFeatureConstructed(ObjectPtr, int)));
-// connect(aPreviewOp, SIGNAL(restartRequired(std::string, ObjectPtr)), this,
-// SLOT(onRestartOperation(std::string, ObjectPtr)));
-// // If manage multi selection the it will be impossible to select more then one
-// // object under operation Edit
-//// connect(aPreviewOp, SIGNAL(multiSelectionEnabled(bool)), this,
-//// SLOT(onMultiSelectionEnabled(bool)));
-//
-// connect(aPreviewOp, SIGNAL(stopSelection(const QList<ObjectPtr>&, const bool)), this,
-// SLOT(onStopSelection(const QList<ObjectPtr>&, const bool)));
-// connect(aPreviewOp, SIGNAL(setSelection(const QList<ObjectPtr>&)), this,
-// SLOT(onSetSelection(const QList<ObjectPtr>&)));
-//
-// PartSet_OperationSketch* aSketchOp = dynamic_cast<PartSet_OperationSketch*>(aPreviewOp);
-// if (aSketchOp) {
-// connect(aSketchOp, SIGNAL(planeSelected(double, double, double)), this,
-// SLOT(onPlaneSelected(double, double, double)));
-// connect(aSketchOp, SIGNAL(fitAllView()), this, SLOT(onFitAllView()));
-// connect(aSketchOp, SIGNAL(launchSketch()), this, SLOT(onSketchLaunched()));
-// }
-// }
-//
-// return anOperation;
-//}
-
-
-//void PartSet_Module::updateCurrentPreview(const std::string& theCmdId)
-//{
-// ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
-// if (!anOperation)
-// return;
-//
-// PartSet_OperationSketchBase* aPreviewOp = dynamic_cast<PartSet_OperationSketchBase*>(anOperation);
-// if (!aPreviewOp)
-// return;
-//
-// FeaturePtr aFeature = aPreviewOp->feature();
-// if (!aFeature || aFeature->getKind() != theCmdId)
-// return;
-//
-// XGUI_Displayer* aDisplayer = xWorkshop()->displayer();
-// // Hide result of sketch
-// std::list<ResultPtr> aResults = aFeature->results();
-// std::list<ResultPtr>::const_iterator aIt;
-// for (aIt = aResults.cbegin(); aIt != aResults.cend(); ++aIt)
-// aDisplayer->erase(*aIt, false);
-//
-// std::list<FeaturePtr> aList = aPreviewOp->subFeatures();
-//
-// std::list<FeaturePtr>::const_iterator anIt = aList.begin(), aLast = aList.end();
-// for (; anIt != aLast; anIt++) {
-// std::shared_ptr<SketchPlugin_Feature> aSPFeature = std::dynamic_pointer_cast<
-// SketchPlugin_Feature>(*anIt);
-// if (!aSPFeature)
-// continue;
-// std::list<ResultPtr> aResults = aSPFeature->results();
-// std::list<ResultPtr>::const_iterator aRIt;
-// for (aRIt = aResults.cbegin(); aRIt != aResults.cend(); ++aRIt) {
-// aDisplayer->display((*aRIt), false);
-// aDisplayer->activate((*aRIt), sketchSelectionModes((*aRIt)));
-// }
-// aDisplayer->display(aSPFeature, false);
-// aDisplayer->activate(aSPFeature, sketchSelectionModes(aSPFeature));
-// }
-// aDisplayer->updateViewer();
-//}
-
-//void PartSet_Module::editFeature(FeaturePtr theFeature)
-//{
-// if (!theFeature)
-// return;
-
-// if (theFeature->getKind() == SKETCH_KIND) {
- //FeaturePtr aFeature = theFeature;
- //if (XGUI_Tools::isModelObject(aFeature)) {
- // ObjectPtr aObject = std::dynamic_pointer_cast<ModelAPI_Object>(aFeature);
- // aFeature = aObject->featureRef();
- //}
-
- //if (aFeature) {
-// onRestartOperation(theFeature->getKind(), theFeature);
-// updateCurrentPreview(theFeature->getKind());
- //}
-// }
-//}
-
-//void PartSet_Module::onStorePoint2D(ObjectPtr theFeature, const std::string& theAttribute)
-//{
-// FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(theFeature);
-//
-// PartSet_OperationSketchBase* aPreviewOp =
-// dynamic_cast<PartSet_OperationSketchBase*>(myWorkshop->currentOperation());
-// if (!aPreviewOp)
-// return;
-//
-// std::shared_ptr<GeomDataAPI_Point2D> aPoint = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
-// aFeature->data()->attribute(theAttribute));
-//
-// PartSet_Tools::setConstraints(aPreviewOp->sketch(), aFeature, theAttribute, aPoint->x(),
-// aPoint->y());
-//}
-
QWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
Config_WidgetAPI* theWidgetApi, std::string theParentId,
QList<ModuleBase_ModelWidget*>& theModelWidgets)
if (theType == "sketch-start-label") {
PartSet_WidgetSketchLabel* aWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
aWgt->setWorkshop(aWorkshop);
+ connect(aWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
+ mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
theModelWidgets.append(aWgt);
return aWgt->getControl();
} else if (theType == "sketch-2dpoint_selector") {
PartSet_WidgetPoint2D* aWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(myCurrentSketch);
+ aWgt->setSketch(mySketchMgr->activeSketch());
- connect(aWgt, SIGNAL(vertexSelected(ObjectPtr, const TopoDS_Shape&)),
- this, SLOT(onVertexSelected(ObjectPtr, const TopoDS_Shape&)));
+ connect(aWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
theModelWidgets.append(aWgt);
return aWgt->getControl();
} if (theType == "point2ddistance") {
PartSet_WidgetPoint2dDistance* aWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
aWgt->setWorkshop(aWorkshop);
- aWgt->setSketch(myCurrentSketch);
+ aWgt->setSketch(mySketchMgr->activeSketch());
theModelWidgets.append(aWgt);
return aWgt->getControl();
} if (theType == "sketch_shape_selector") {
PartSet_WidgetShapeSelector* aWgt =
new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
- aWgt->setSketcher(myCurrentSketch);
+ aWgt->setSketcher(mySketchMgr->activeSketch());
theModelWidgets.append(aWgt);
return aWgt->getControl();
- }else
+ } if (theType == "sketch_constraint_shape_selector") {
+ PartSet_WidgetConstraintShapeSelector* aWgt =
+ new PartSet_WidgetConstraintShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
+ aWgt->setSketcher(mySketchMgr->activeSketch());
+
+ theModelWidgets.append(aWgt);
+ return aWgt->getControl();
+
+ } else
return 0;
}
+bool PartSet_Module::isSketchOperationActive() const
+{
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+
+ bool isSketchOp = aOperation && aOperation->id().toStdString() == SketchPlugin_Sketch::ID();
+ return isSketchOp;
+}
+
+bool PartSet_Module::isSketchFeatureOperationActive() const
+{
+ bool isCurrentSketchOp = false;
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (aOperation) {
+ FeaturePtr aFeature = aOperation->feature();
+ std::shared_ptr<SketchPlugin_Feature> aSPFeature =
+ std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
+ isCurrentSketchOp = aSPFeature.get() != NULL;
+ }
+ return isCurrentSketchOp;
+}
+
+void PartSet_Module::createActions()
+{
+ QAction* aAction = new QAction(QIcon(":pictures/delete.png"), tr("Delete"), this);
+ addAction("DELETE_PARTSET_CMD", aAction);
+}
+
+QAction* PartSet_Module::action(const QString& theId) const
+{
+ if (myActions.contains(theId))
+ return myActions[theId];
+ return 0;
+}
+
+void PartSet_Module::addAction(const QString& theId, QAction* theAction)
+{
+ if (myActions.contains(theId))
+ qCritical("A command with Id = '%s' already defined!", qPrintable(theId));
+ theAction->setData(theId);
+ connect(theAction, SIGNAL(triggered(bool)), this, SLOT(onAction(bool)));
+ myActions[theId] = theAction;
+}
+
+void PartSet_Module::onAction(bool isChecked)
+{
+ QAction* aAction = static_cast<QAction*>(sender());
+ QString anId = aAction->data().toString();
+
+ if (anId == "DELETE_PARTSET_CMD") {
+ deleteObjects();
+ }
+}
+
+void PartSet_Module::deleteObjects()
+{
+ bool isSketchOp = isSketchOperationActive();
+ if (!isSketchOp && !isSketchFeatureOperationActive())
+ return;
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
-//XGUI_Workshop* PartSet_Module::xWorkshop() const
-//{
-// XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
-// if (aConnector) {
-// return aConnector->workshop();
-// }
-// return 0;
-//}
-
-
-//QIntList PartSet_Module::sketchSelectionModes(ObjectPtr theFeature)
-//{
-// QIntList aModes;
-// FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(theFeature);
-// if (aFeature) {
-// if (aFeature->getKind() == SketchPlugin_Sketch::ID()) {
-// aModes.append(TopAbs_FACE);
-// return aModes;
-// } else if (PartSet_Tools::isConstraintFeature(aFeature->getKind())) {
-// aModes.append(AIS_DSM_Text);
-// aModes.append(AIS_DSM_Line);
-// return aModes;
-// }
-// }
-// aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_VERTEX));
-// aModes.append(AIS_Shape::SelectionMode((TopAbs_ShapeEnum) TopAbs_EDGE));
-// return aModes;
-//}
-
-
-//gp_Pln PartSet_Module::getSketchPlane(FeaturePtr theSketch) const
-//{
-// DataPtr aData = theSketch->data();
-// std::shared_ptr<GeomDataAPI_Point> anOrigin = std::dynamic_pointer_cast<GeomDataAPI_Point>(
-// aData->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
-// std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
-// aData->attribute(SketchPlugin_Sketch::NORM_ID()));
-// gp_Pnt aOrig(anOrigin->x(), anOrigin->y(), anOrigin->z());
-// gp_Dir aDir(aNorm->x(), aNorm->y(), aNorm->z());
-// return gp_Pln(aOrig, aDir);
-//}
-
-
-//void PartSet_Module::onSelectionChanged()
-//{
-// ModuleBase_ISelection* aSelect = myWorkshop->selection();
-// QList<ModuleBase_ViewerPrs> aSelected = aSelect->getSelected();
-// // We need to stop edit operation if selection is cleared
-// if (aSelected.size() == 0) {
-// // do not perform commit of the current edit operation here, because
-// // this functionality is realized inside this operation
-// /*PartSet_OperationFeatureEdit* anEditOp =
-// dynamic_cast<PartSet_OperationFeatureEdit*>(myWorkshop->currentOperation());
-// if (!anEditOp)
-// return;
-// anEditOp->commit();*/
-// } else {
-// PartSet_OperationSketchBase* aSketchOp =
-// dynamic_cast<PartSet_OperationSketchBase*>(myWorkshop->currentOperation());
-// if (aSketchOp) {
-// aSketchOp->selectionChanged(aSelect);
-// }
-// }
-//}
+ XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
+ if (!isSketchOp && anOpMgr->canStopOperation()) {
+ ModuleBase_Operation* aCurrentOp = anOpMgr->currentOperation();
+ if (aCurrentOp) {
+ aCurrentOp->abort();
+ }
+ }
+ // sketch feature should be skipped, only sub-features can be removed
+ // when sketch operation is active
+ CompositeFeaturePtr aSketch = mySketchMgr->activeSketch();
+
+ ModuleBase_ISelection* aSel = aConnector->selection();
+ QObjectPtrList aSelectedObj = aSel->selectedPresentations();
+
+ std::set<FeaturePtr> aRefFeatures;
+ foreach (ObjectPtr aObj, aSelectedObj)
+ {
+ //ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
+ //if (aPart) {
+ // TODO: check for what there is this condition. It is placed here historicaly because
+ // ther is this condition during remove features.
+ //} else {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
+ if (aFeature.get() != NULL) {
+ aObj->document()->refsToFeature(aFeature, aRefFeatures, false);
+ }
+ //}
+ }
+
+ if (!aRefFeatures.empty()) {
+ QStringList aRefNames;
+ std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
+ aLast = aRefFeatures.end();
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aFeature = (*anIt);
+ if (aFeature == aSketch)
+ continue;
+ aRefNames.append((*anIt)->name().c_str());
+ }
+ if (!aRefNames.empty()) {
+ QString aNames = aRefNames.join(", ");
+
+ QMainWindow* aDesktop = aWorkshop->desktop();
+ QMessageBox::StandardButton aRes = QMessageBox::warning(
+ aDesktop, tr("Delete features"),
+ QString(tr("Selected features are used in the following features: %1.\
+ These features will be deleted also. Would you like to continue?")).arg(aNames),
+ QMessageBox::No | QMessageBox::Yes, QMessageBox::No);
+ if (aRes != QMessageBox::Yes)
+ return;
+ }
+ }
+
+ SessionPtr aMgr = ModelAPI_Session::get();
+ aMgr->startOperation();
+ std::set<FeaturePtr>::const_iterator anIt = aRefFeatures.begin(),
+ aLast = aRefFeatures.end();
+ for (; anIt != aLast; anIt++) {
+ FeaturePtr aRefFeature = (*anIt);
+ if (aRefFeature == aSketch)
+ continue;
+ aRefFeature->document()->removeFeature(aRefFeature);
+ }
+
+ foreach (ObjectPtr aObj, aSelectedObj)
+ {
+ DocumentPtr aDoc = aObj->document();
+ //ResultPartPtr aPart = std::dynamic_pointer_cast<ModelAPI_ResultPart>(aObj);
+ //if (aPart) {
+ // if (aDoc == aMgr->activeDocument()) {
+ // aDoc->close();
+ // }
+ //} else {
+ //FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
+ FeaturePtr aFeature = ModelAPI_Feature::feature(aObj);
+ if (aFeature.get() != NULL) {
+ aDoc->removeFeature(aFeature);
+ }
+ //}
+ }
+ aWorkshop->displayer()->updateViewer();
+ //myDisplayer->updateViewer();
+ aMgr->finishOperation();
+}
