#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Validators.h"
#include "PartSet_Tools.h"
-#include "ModuleBase_WidgetValidated.h"
#include "PartSet_WidgetPoint2d.h"
#include "PartSet_WidgetPoint2dDistance.h"
#include "PartSet_WidgetShapeSelector.h"
#include "PartSet_WidgetSketchCreator.h"
#include "PartSet_SketcherMgr.h"
#include "PartSet_MenuMgr.h"
-#include <PartSet_CustomPrs.h>
+#include "PartSet_CustomPrs.h"
+#include "PartSet_IconFactory.h"
#include "PartSet_Filters.h"
#include "PartSet_FilterInfinite.h"
#include <PartSetPlugin_Duplicate.h>
#include <ModuleBase_Operation.h>
+#include <ModuleBase_OperationAction.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IViewWindow.h>
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_WidgetEditor.h>
+#include <ModuleBase_WidgetValidated.h>
#include <ModuleBase_FilterFactory.h>
#include <ModuleBase_Tools.h>
-#include <GeomValidators_ShapeType.h>
+#include <ModuleBase_OperationFeature.h>
+#include <GeomValidators_ShapeType.h>
+#include <GeomValidators_Finite.h>
#include <GeomValidators_Face.h>
#include <GeomValidators_ConstructionComposite.h>
#include <GeomValidators_ZeroOffset.h>
#include <ModelAPI_Validator.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_Session.h>
-#include <ModelAPI_ShapeValidator.h>
+#include <GeomValidators_DifferentShapes.h>
+#include <ModelAPI_ResultBody.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_Tools.h>
#include <XGUI_ObjectsBrowser.h>
#include <XGUI_SelectionMgr.h>
+#include <XGUI_DataModel.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
#include <SketchPlugin_Arc.h>
#include <SketchPlugin_Circle.h>
#include <SketchPlugin_Point.h>
+#include <SketchPlugin_ConstraintAngle.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <QDebug>
#endif
-
-
/*!Create and return new instance of XGUI_Module*/
extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
{
: ModuleBase_IModule(theWshop),
myRestartingMode(RM_None), myVisualLayerId(0)
{
+ new PartSet_IconFactory();
+
mySketchMgr = new PartSet_SketcherMgr(this);
myDataModel = new PartSet_DocumentDataModel(this);
aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
-
+ aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
- aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
-
aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
+ aFactory->registerValidator("GeomValidators_DifferentShapes", new GeomValidators_DifferentShapes);
aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
+ aFactory->registerValidator("GeomValidators_Finite", new GeomValidators_Finite);
aFactory->registerValidator("GeomValidators_ConstructionComposite",
new GeomValidators_ConstructionComposite);
aFactory->registerValidator("PartSet_SketchEntityValidator",
new PartSet_SketchEntityValidator);
- aFactory->registerValidator("PartSet_SameTypeAttr",
- new PartSet_SameTypeAttrValidator);
-
aFactory->registerValidator("GeomValidators_Different",
new GeomValidators_Different);
}
mySketchMgr->commitNestedSketch(theOperation);
}
- if (theOperation->isEditOperation())
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (!aFOperation || aFOperation->isEditOperation())
return;
// the selection is cleared after commit the create operation
// in order to do not use the same selected objects in the restarted operation
aWorkshop->selector()->clearSelection();
/// Restart sketcher operations automatically
- FeaturePtr aFeature = theOperation->feature();
+ FeaturePtr aFeature = aFOperation->feature();
std::shared_ptr<SketchPlugin_Feature> aSPFeature =
std::dynamic_pointer_cast<SketchPlugin_Feature>(aFeature);
if (aSPFeature && (myRestartingMode == RM_LastFeatureUsed ||
myRestartingMode == RM_EmptyFeatureUsed)) {
- myLastOperationId = theOperation->id();
- myLastFeature = myRestartingMode == RM_LastFeatureUsed ? theOperation->feature() : FeaturePtr();
-
- launchOperation(myLastOperationId);
+ myLastOperationId = aFOperation->id();
+ myLastFeature = myRestartingMode == RM_LastFeatureUsed ? aFOperation->feature() : FeaturePtr();
+ if (!sketchMgr()->sketchSolverError())
+ launchOperation(myLastOperationId);
}
breakOperationSequence();
}
mySketchMgr->startNestedSketch(theOperation);
}
- myCustomPrs->activate(theOperation->feature());
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (aFOperation)
+ myCustomPrs->activate(aFOperation->feature(), true);
+}
+
+void PartSet_Module::onOperationResumed(ModuleBase_Operation* theOperation)
+{
+ ModuleBase_IModule::onOperationResumed(theOperation);
+
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (aFOperation)
+ myCustomPrs->activate(aFOperation->feature(), true);
}
void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
{
- myCustomPrs->deactivate();
+ bool isModified = myCustomPrs->deactivate(false);
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->stopSketch(theOperation);
else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->stopNestedSketch(theOperation);
}
+
+ if (isModified) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Displayer* aDisplayer = aConnector->workshop()->displayer();
+ aDisplayer->updateViewer();
+ }
}
ModuleBase_Operation* PartSet_Module::currentOperation() const
return aCanRedo;
}
+bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
+{
+ bool aValid = true;
+ if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature) {
+ // part features are removed in the PartSet module only.
+ if (aFeature->getKind() == PartSetPlugin_Part::ID())
+ aValid = false;
+ }
+ }
+ return aValid;
+}
+
bool PartSet_Module::canCommitOperation() const
{
return mySketchMgr->canCommitOperation();
}
+bool PartSet_Module::canEraseObject(const ObjectPtr& theObject) const
+{
+ // the sketch manager put the restriction to the objects erase
+ return mySketchMgr->canEraseObject(theObject);
+}
+
bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
{
// the sketch manager put the restriction to the objects display
if (isSketchOp || isNestedOp) {
// in active sketch operation it is possible to activate operation object in selection
// in the edit operation, e.g. points of the line can be moved when the line is edited
- aCanActivate = aCanActivate || anOperation->isEditOperation();
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(anOperation);
+ aCanActivate = aCanActivate || (aFOperation && aFOperation->isEditOperation());
}
return aCanActivate;
}
return myMenuMgr->addViewerMenu(theMenu, theStdActions);
}
+void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
+{
+ myMenuMgr->updateViewerMenu(theStdActions);
+}
+
+
void PartSet_Module::activeSelectionModes(QIntList& theModes)
{
theModes.clear();
return mySketchMgr->isMouseOverWindow();
}
+void PartSet_Module::closeDocument()
+{
+ clearViewer();
+}
+
+void PartSet_Module::clearViewer()
+{
+ myCustomPrs->clearPrs();
+}
+
void PartSet_Module::propertyPanelDefined(ModuleBase_Operation* theOperation)
{
- ModuleBase_IPropertyPanel* aPanel = theOperation->propertyPanel();
- if (PartSet_SketcherMgr::isSketchOperation(theOperation) && (theOperation->isEditOperation())) {
+ ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ if (!aFOperation)
+ return;
+
+ ModuleBase_IPropertyPanel* aPanel = aFOperation->propertyPanel();
+ if (PartSet_SketcherMgr::isSketchOperation(aFOperation) && (aFOperation->isEditOperation())) {
// we have to manually activate the sketch label in edit mode
aPanel->activateWidget(aPanel->modelWidgets().first());
return;
}
// Restart last operation type
- if ((theOperation->id() == myLastOperationId) && myLastFeature) {
+ if ((aFOperation->id() == myLastOperationId) && myLastFeature) {
ModuleBase_ModelWidget* aWgt = aPanel->activeWidget();
- if (theOperation->id().toStdString() == SketchPlugin_Line::ID()) {
+ if (aFOperation->id().toStdString() == SketchPlugin_Line::ID()) {
// Initialise new line with first point equal to end of previous
PartSet_WidgetPoint2D* aPnt2dWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
if (aPnt2dWgt) {
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aData->attribute(SketchPlugin_Line::END_ID()));
if (aPoint) {
aPnt2dWgt->setPoint(aPoint->x(), aPoint->y());
- PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), theOperation->feature(),
+ PartSet_Tools::setConstraints(mySketchMgr->activeSketch(), aFOperation->feature(),
aWgt->attributeID(), aPoint->x(), aPoint->y());
aPanel->activateNextWidget(aPnt2dWgt);
}
std::string aId = aFeature->getKind();
if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
(aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
+ (aId == SketchPlugin_ConstraintDistance::ID()) ||
+ (aId == SketchPlugin_ConstraintAngle::ID())) {
editFeature(aFeature);
}
}
if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
if (myRestartingMode != RM_Forbided)
myRestartingMode = RM_LastFeatureUsed;
- anOperation->commit();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
+ // do nothing if the feature can not be applyed
+ if (anOpMgr->isApplyEnabled())
+ anOperation->commit();
}
}
}
bool PartSet_Module::deleteObjects()
{
- SessionPtr aMgr = ModelAPI_Session::get();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
+
+ //SessionPtr aMgr = ModelAPI_Session::get();
// 1. check whether the delete should be processed in the module
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
// 2. find selected presentations
// selected objects should be collected before the current operation abort because
// the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
ModuleBase_ISelection* aSel = workshop()->selection();
QObjectPtrList aSelectedObj = aSel->selectedPresentations();
// if there are no selected objects in the viewer, that means that the selection in another
if (aSketchObjects.size() == 0)
return true;
- // the active nested sketch operation should be aborted unconditionally
- if (isNestedOp)
- anOperation->abort();
-
// 3. start operation
QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
- aMgr->startOperation(aDescription.toStdString());
+ ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction(aDescription, this);
+
+ // the active nested sketch operation should be aborted unconditionally
+ // the Delete action should be additionally granted for the Sketch operation
+ // in order to do not abort/commit it
+ if (!anOpMgr->canStartOperation(anOpAction->id(), isSketchOp/*granted*/))
+ return true; // the objects are processed but can not be deleted
+
+ anOpMgr->startOperation(anOpAction);
// 4. delete features
// sketch feature should be skipped, only sub-features can be removed
// when sketch operation is active
aWorkshop->deleteFeatures(aSketchObjects);
// 5. stop operation
- aWorkshop->displayer()->updateViewer();
- aMgr->finishOperation();
- } else {
+ anOpMgr->commitOperation();
+ }
+ else {
bool isPartRemoved = false;
// Delete part with help of PartSet plugin
// TODO: the deleted objects has to be processed by multiselection
std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
DocumentPtr aPartDoc = aPart->partDoc();
if (aPartDoc.get()) {
- aMgr->startOperation(PartSetPlugin_Remove::ID());
+ ModuleBase_OperationAction* anOpAction = new ModuleBase_OperationAction
+ (PartSetPlugin_Remove::ID().c_str(), this);
+ if (!anOpMgr->canStartOperation(anOpAction->id()))
+ return true; // the objects are processed but can not be deleted
+
+ anOpMgr->startOperation(anOpAction);
+
FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
aFeature->execute();
- aMgr->finishOperation();
+
+ anOpMgr->commitOperation();
isPartRemoved = true;
}
}
void PartSet_Module::onFeatureTriggered()
{
- SessionPtr aMgr = ModelAPI_Session::get();
- // 1. check whether the delete should be processed in the module
- ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
- if (isNestedOp) {
- // in case if in the viewer nothing is displayed, the create operation should not be
- // comitted even if all values of the feature are initialized
- if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
- QAction* aCmd = dynamic_cast<QAction*>(sender());
- //Do nothing on uncheck
- if (aCmd->isCheckable() && !aCmd->isChecked())
- return;
-
- // the action information should be saved before the operation is aborted
- // because this abort leads to update command status, which unchecks this action
- anOperation->abort();
-
- launchOperation(aCmd->data().toString());
+ QAction* aCmd = dynamic_cast<QAction*>(sender());
+ if (aCmd->isCheckable() && aCmd->isChecked()) {
+ // 1. check whether the delete should be processed in the module
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
+ if (isNestedOp) {
+ // in case if in the viewer nothing is displayed, the create operation should not be
+ // comitted even if all values of the feature are initialized
+ if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
+ // the action information should be saved before the operation is aborted
+ // because this abort leads to update command status, which unchecks this action
+ anOperation->abort();
+ launchOperation(aCmd->data().toString());
+ }
}
}
ModuleBase_IModule::onFeatureTriggered();
}
}
+void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
+{
+ // this is obsolete
+ // it should be recomputed in order to disappear in the viewer if the corresponded object
+ // is erased
+ //if (myCustomPrs->isActive())
+ // myCustomPrs->redisplay(theObject, false);
+}
+
void PartSet_Module::onViewTransformed(int theTrsfType)
{
// Set length of arrows constant in pixel size
aDisplayer->updateViewer();
}
-void PartSet_Module::customizeObject(ObjectPtr theObject)
+bool PartSet_Module::customizeObject(ObjectPtr theObject, const bool theUpdateViewer)
{
+ bool isRedisplayed = false;
if (myCustomPrs->isActive())
- myCustomPrs->customize(theObject);
+ isRedisplayed = myCustomPrs->redisplay(theObject, theUpdateViewer);
+
+ return isRedisplayed;
}
void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
aLabel->setPalette(aPalet);
aOB->treeView()->setExpandsOnDoubleClick(false);
+#ifdef ModuleDataModel
connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
SLOT(onTreeViewDoubleClick(const QModelIndex&)));
connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
SLOT(onTreeViewDoubleClick(const QModelIndex&)));
connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
+#endif
}
}
QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
int aSelected = aObjects.size();
SessionPtr aMgr = ModelAPI_Session::get();
+ QAction* aActivatePartAction = myMenuMgr->action("ACTIVATE_PART_CMD");
if (aSelected == 1) {
bool hasResult = false;
bool hasFeature = false;
}
if (aPart.get()) // this may be null is Part feature is disabled
aPartDoc = aPart->partDoc();
- if (aMgr->activeDocument() == aPartDoc)
- theMenu->addAction(myMenuMgr->action("DEACTIVATE_PART_CMD"));
- else
- theMenu->addAction(myMenuMgr->action("ACTIVATE_PART_CMD"));
+
+ theMenu->addAction(aActivatePartAction);
+ aActivatePartAction->setEnabled((aMgr->activeDocument() != aPartDoc));
+
} else if (aObject->document() == aMgr->activeDocument()) {
if (hasParameter || hasFeature)
theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
}
+
+ ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
+ if( aResult.get() )
+ theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
} else { // If feature is 0 the it means that selected root object (document)
if (aMgr->activeDocument() != aMgr->moduleDocument())
theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
if (aMgr->activeDocument() != aMgr->moduleDocument())
theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
}
- bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
- myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
- myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
- myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
+ bool aNotDeactivate = (myWorkshop->currentOperation() == 0);
+ myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aNotDeactivate);
+ if (!aNotDeactivate)
+ aActivatePartAction->setEnabled(false);
}
void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
SessionPtr aMgr = ModelAPI_Session::get();
DocumentPtr aActiveDoc = aMgr->activeDocument();
- DocumentPtr aDoc = aMgr->moduleDocument();
+#ifdef ModuleDataModel
QModelIndex aOldIndex = myDataModel->activePartTree();
+ DocumentPtr aDoc = aMgr->moduleDocument();
if (aActiveDoc == aDoc) {
if (aOldIndex.isValid())
aTreeView->setExpanded(aOldIndex, false);
}
}
}
+#else
+ // Problem with MPV: At first time on creation it doesn't work because Part feature
+ // creation event will be sent after
+ if (aActivePartIndex.isValid())
+ aTreeView->setExpanded(aActivePartIndex, false);
+ XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
+ aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
+ if (aActivePartIndex.isValid())
+ aTreeView->setExpanded(aActivePartIndex, true);
+#endif
aLabel->setPalette(aPalet);
aWorkshop->updateCommandStatus();
TColStd_SequenceOfInteger aZList;
aViewer->GetAllZLayers(aZList);
bool aFound = false;
- //TColStd_SequenceIteratorOfSequenceOfInteger aIt;
for (int i = 1; i <= aZList.Length(); i++) {
if (aZList(i) == myVisualLayerId) {
aFound = true;