#include <ModuleBase_FilterMulti.h>
#include <ModuleBase_FilterCustom.h>
#include <ModuleBase_FilterNoConsructionSubShapes.h>
+#include <GeomValidators_Edge.h>
+#include <GeomValidators_EdgeOrVertex.h>
+#include <GeomValidators_Face.h>
+#include <GeomValidators_ConstructionComposite.h>
+
+#include <PartSet_FilterSketchEntity.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Events.h>
#include <XGUI_OperationMgr.h>
#include <XGUI_PropertyPanel.h>
#include <XGUI_ModuleConnector.h>
+#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Tools.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
-//#include <SketchPlugin_ConstraintRigid.h>
+
+#include <SketcherPrs_SymbolPrs.h>
+#include <SketcherPrs_Tools.h>
#include <Events_Loop.h>
#include <Config_PropManager.h>
#include <TopoDS.hxx>
#include <TopoDS_Shape.hxx>
#include <BRep_Tool.hxx>
+#include <AIS_Dimension.hxx>
#include <QObject>
#include <QMouseEvent>
PartSet_Module::PartSet_Module(ModuleBase_IWorkshop* theWshop)
: ModuleBase_IModule(theWshop),
- myRestartingMode(RM_None)
+ myRestartingMode(RM_None), myVisualLayerId(0)
{
- //myWorkshop = dynamic_cast<XGUI_Workshop*>(theWshop);
mySketchMgr = new PartSet_SketcherMgr(this);
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(theWshop);
ModuleBase_IViewer* aViewer = theWshop->viewer();
connect(aViewer, SIGNAL(keyRelease(ModuleBase_IViewWindow*, QKeyEvent*)),
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
+ connect(aViewer, SIGNAL(viewTransformed(int)),
+ SLOT(onViewTransformed(int)));
createActions();
}
aFactory->registerValidator("PartSet_RigidValidator", new PartSet_RigidValidator);
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
- aFactory->registerValidator("PartSet_SketchValidator", new PartSet_SketchValidator);
+
+ aFactory->registerValidator("GeomValidators_Edge", new GeomValidators_Edge);
+ aFactory->registerValidator("GeomValidators_EdgeOrVertex",
+ new GeomValidators_EdgeOrVertex);
+ aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
+
+ aFactory->registerValidator("GeomValidators_ConstructionComposite",
+ new GeomValidators_ConstructionComposite);
+
+ aFactory->registerValidator("PartSet_SketchEntityValidator",
+ new PartSet_SketchEntityValidator);
+
+ aFactory->registerValidator("PartSet_SameTypeAttr",
+ new PartSet_SameTypeAttrValidator);
}
void PartSet_Module::registerFilters()
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
ModuleBase_FilterFactory* aFactory = aConnector->selectionFilters();
- aFactory->registerFilter("EdgeFilter", new ModuleBase_FilterLinearEdge);
- aFactory->registerFilter("FaceFilter", new ModuleBase_FilterFace);
- aFactory->registerFilter("MultiFilter", new ModuleBase_FilterMulti);
- Handle(SelectMgr_Filter) aSelectFilter = new ModuleBase_FilterNoConsructionSubShapes(workshop());
- aFactory->registerFilter("NoConstructionSubShapesFilter",
- new ModuleBase_FilterCustom(aSelectFilter));
+ //aFactory->registerFilter("EdgeFilter", new ModuleBase_FilterLinearEdge);
+ //aFactory->registerFilter("FaceFilter", new ModuleBase_FilterFace);
+ //aFactory->registerFilter("MultiFilter", new ModuleBase_FilterMulti);
+ //Handle(SelectMgr_Filter) aSelectFilter = new ModuleBase_FilterNoConsructionSubShapes(workshop());
+ //aFactory->registerFilter("NoConstructionSubShapesFilter",
+ // new ModuleBase_FilterCustom(aSelectFilter));
+ //Handle(SelectMgr_Filter) aSelectFilter = new PartSet_FilterSketchEntity(workshop());
+ //aFactory->registerFilter("SketchEntityFilter", new ModuleBase_FilterCustom(aSelectFilter));
}
void PartSet_Module::registerProperties()
void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
{
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
+ Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ aViewer->AddZLayer(myVisualLayerId);
mySketchMgr->startSketch(theOperation);
}
else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
{
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->stopSketch(theOperation);
+ Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ aViewer->RemoveZLayer(myVisualLayerId);
+ myVisualLayerId = 0;
}
else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->stopNestedSketch(theOperation);
myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
}
+ModuleBase_Operation* PartSet_Module::currentOperation() const
+{
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_OperationMgr* anOpMgr = aConnector->workshop()->operationMgr();
+ return anOpMgr->currentOperation();
+}
+
bool PartSet_Module::canUndo() const
{
bool aCanUndo = false;
bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
{
- bool aCanDisplay = false;
- if (!mySketchMgr->canDisplayObject())
- return aCanDisplay;
- CompositeFeaturePtr aSketchFeature = mySketchMgr->activeSketch();
- if (aSketchFeature.get() != NULL) {
- FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
-
- // MPV: the second and third conditions to avoid crash on exit for application
- if (aFeature.get() != NULL && aFeature->data().get() && aFeature->data()->isValid()) {
- if (aFeature == aSketchFeature) {
- aCanDisplay = false;
- }
- else if (aSketchFeature.get() && aSketchFeature->data().get() &&
- aSketchFeature->data()->isValid()) {
- for (int i = 0; i < aSketchFeature->numberOfSubs() && !aCanDisplay; i++) {
- FeaturePtr aSubFeature = aSketchFeature->subFeature(i);
- std::list<ResultPtr> aResults = aSubFeature->results();
- std::list<ResultPtr>::const_iterator aIt;
- for (aIt = aResults.begin(); aIt != aResults.end() && !aCanDisplay; ++aIt) {
- if (theObject == (*aIt))
- aCanDisplay = true;
- }
- if (aSubFeature == theObject)
- aCanDisplay = true;
- }
- }
- }
- }
- else {
- aCanDisplay = ModuleBase_IModule::canDisplayObject(theObject);
+ // the display should be possible almost always, with exception of some specific cases
+
+ bool aCanDisplay = true;
+
+ if (mySketchMgr->activeSketch()) {
+ aCanDisplay = mySketchMgr->canDisplayObject(theObject);
}
return aCanDisplay;
}
hasFeature = true;
}
}
- if (hasFeature)
- theMenu->addAction(action("DELETE_PARTSET_CMD"));
+ if (hasFeature) {
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ QAction* anAction = aWorkshop->contextMenuMgr()->action("DELETE_CMD");
+ theMenu->addAction(anAction);
+ }
+ }
+ bool isAuxiliary;
+ if (mySketchMgr->canSetAuxiliary(isAuxiliary)) {
+ QAction* anAction = action("AUXILIARY_CMD");
+ theMenu->addAction(anAction);
+ anAction->setChecked(isAuxiliary);
}
}
void PartSet_Module::onNoMoreWidgets()
{
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
- if (anOperation) {
+ if (anOperation) {
+ if (PartSet_SketcherMgr::isNestedSketchOperation(anOperation)) {
if (myRestartingMode != RM_Forbided)
myRestartingMode = RM_LastFeatureUsed;
anOperation->commit();
if (aOperation->id().toStdString() == SketchPlugin_Line::ID()) {
/// If last line finished on vertex the lines creation sequence has to be break
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
const QList<ModuleBase_ModelWidget*>& aWidgets = aPanel->modelWidgets();
- if (aWidgets.last() == aPanel->activeWidget()) {
- myRestartingMode = RM_Forbided;
+ QList<ModuleBase_ModelWidget*>::const_iterator anIt = aWidgets.begin(), aLast = aWidgets.end();
+ bool aFoundWidget = false;
+ bool aFoundObligatory = false;
+ for (; anIt != aLast && !aFoundObligatory; anIt++) {
+ if (!aFoundWidget)
+ aFoundWidget = *anIt == anActiveWidget;
+ else
+ aFoundObligatory = (*anIt)->isObligatory();
}
+ if (!aFoundObligatory)
+ myRestartingMode = RM_Forbided;
}
}
-QWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
- Config_WidgetAPI* theWidgetApi, std::string theParentId,
- QList<ModuleBase_ModelWidget*>& theModelWidgets)
+ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
+ Config_WidgetAPI* theWidgetApi, std::string theParentId)
{
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
XGUI_Workshop* aWorkshop = aConnector->workshop();
ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
- PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, theWidgetApi, theParentId);
+ PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
+ theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
aLabelWgt->setWorkshop(aWorkshop);
connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
+ connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
+ mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
aConstraintShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aConstraintShapeSelectorWgt;
}
- if(aWgt)
- theModelWidgets.append(aWgt);
return aWgt;
}
void PartSet_Module::createActions()
{
- QAction* aAction = new QAction(QIcon(":pictures/delete.png"), tr("Delete"), this);
- addAction("DELETE_PARTSET_CMD", aAction);
+ QAction* anAction;
+
+ anAction = new QAction(tr("Auxiliary"), this);
+ anAction->setCheckable(true);
+ addAction("AUXILIARY_CMD", anAction);
}
QAction* PartSet_Module::action(const QString& theId) const
QAction* aAction = static_cast<QAction*>(sender());
QString anId = aAction->data().toString();
- if (anId == "DELETE_PARTSET_CMD") {
- deleteObjects();
+ if (anId == "AUXILIARY_CMD") {
+ mySketchMgr->setAuxiliary(isChecked);
}
}
-void PartSet_Module::deleteObjects()
+bool PartSet_Module::deleteObjects()
{
ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
- bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation);
- if (!isSketchOp && !PartSet_SketcherMgr::isNestedSketchOperation(anOperation))
- return;
+ bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
+ isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (!isSketchOp && !isNestedOp)
+ return false;
// sketch feature should be skipped, only sub-features can be removed
// when sketch operation is active
// selected objects should be collected before the current operation abort because
// the abort leads to selection lost on constraint objects. It can be corrected after #386 issue
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
ModuleBase_ISelection* aSel = aConnector->selection();
QObjectPtrList aSelectedObj = aSel->selectedPresentations();
- XGUI_Workshop* aWorkshop = aConnector->workshop();
- XGUI_OperationMgr* anOpMgr = aWorkshop->operationMgr();
- if (!isSketchOp && anOpMgr->canStopOperation()) {
- ModuleBase_Operation* aCurrentOp = anOpMgr->currentOperation();
- if (aCurrentOp) {
- aCurrentOp->abort();
- }
- }
+ // if there are no selected objects in the viewer, that means that the selection in another
+ // place cased this method. It is necessary to return the false value to understande in above
+ // method that delete is not processed
+ if (aSelectedObj.count() == 0)
+ return false;
+
+ // the active nested sketch operation should be aborted unconditionally
+ if (isNestedOp)
+ anOperation->abort();
+
std::set<FeaturePtr> aRefFeatures;
foreach (ObjectPtr aObj, aSelectedObj)
{
}
//}
}
- QString aDescription = tr("Delete");
+
+ QString aDescription = aWorkshop->contextMenuMgr()->action("DELETE_CMD")->text();
/**
// according to #355 feature, it is not necessary to inform about dependencies during
// sketch delete operation
aWorkshop->displayer()->updateViewer();
//myDisplayer->updateViewer();
aMgr->finishOperation();
+
+ return true;
+}
+
+
+void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
+{
+ Handle(AIS_InteractiveObject) anAIS = theAIS->impl<Handle(AIS_InteractiveObject)>();
+ if (!anAIS.IsNull()) {
+ Handle(AIS_InteractiveContext) aCtx = anAIS->GetContext();
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(anAIS);
+ if (!aDim.IsNull()) {
+ aCtx->SetZLayer(aDim, myVisualLayerId);
+ } else {
+ Handle(SketcherPrs_SymbolPrs) aCons = Handle(SketcherPrs_SymbolPrs)::DownCast(anAIS);
+ if (!aCons.IsNull())
+ aCtx->SetZLayer(aCons, myVisualLayerId);
+ }
+ }
+}
+
+void PartSet_Module::onViewTransformed(int theTrsfType)
+{
+ // Set length of arrows constant in pixel size
+ // if the operation is panning or rotate or panglobal then do nothing
+ if ((theTrsfType == 1) || (theTrsfType == 3) || (theTrsfType == 4))
+ return;
+
+ ModuleBase_IViewer* aViewer = myWorkshop->viewer();
+ Handle(V3d_View) aView = aViewer->activeView();
+
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ XGUI_Displayer* aDisplayer = aWorkshop->displayer();
+ Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
+
+ double aLen = aView->Convert(15);
+
+ SketcherPrs_Tools::setArrowSize(aLen);
+ bool isModified = false;
+ QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
+ foreach (AISObjectPtr aAIS, aPrsList) {
+ Handle(AIS_InteractiveObject) aAisObj = aAIS->impl<Handle(AIS_InteractiveObject)>();
+
+ Handle(AIS_Dimension) aDim = Handle(AIS_Dimension)::DownCast(aAisObj);
+ if (!aDim.IsNull()) {
+ aDim->DimensionAspect()->ArrowAspect()->SetLength(aLen);
+ aContext->Redisplay(aDim, false);
+ isModified = true;
+ }
+ }
+ if (isModified)
+ aDisplayer->updateViewer();
}
