#include "PartSet_WidgetSketchLabel.h"
#include "PartSet_Validators.h"
#include "PartSet_Tools.h"
+#include "ModuleBase_WidgetValidated.h"
#include "PartSet_WidgetPoint2d.h"
#include "PartSet_WidgetPoint2dDistance.h"
#include "PartSet_WidgetShapeSelector.h"
#include <PartSetPlugin_Remove.h>
#include <PartSetPlugin_Part.h>
+#include <PartSetPlugin_Duplicate.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_IViewer.h>
#include <GeomValidators_ConstructionComposite.h>
#include <GeomValidators_ZeroOffset.h>
#include <GeomValidators_BooleanArguments.h>
+#include <GeomValidators_Different.h>
#include <ModelAPI_Object.h>
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
connect(aViewer, SIGNAL(viewTransformed(int)),
SLOT(onViewTransformed(int)));
+ connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
+ SLOT(onViewCreated(ModuleBase_IViewWindow*)));
myMenuMgr = new PartSet_MenuMgr(this);
- myCustomPrs = std::shared_ptr<GeomAPI_ICustomPrs>(new PartSet_CustomPrs(theWshop));
+ myCustomPrs = new PartSet_CustomPrs(theWshop);
Events_Loop* aLoop = Events_Loop::loop();
aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
if (!aFilter.IsNull())
aFilter.Nullify();
}
+ delete myCustomPrs;
}
void PartSet_Module::activateSelectionFilters()
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
+ aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
+
aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
aFactory->registerValidator("PartSet_SameTypeAttr",
new PartSet_SameTypeAttrValidator);
+
+ aFactory->registerValidator("GeomValidators_Different",
+ new GeomValidators_Different);
}
void PartSet_Module::registerFilters()
void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
{
- // z layer is created for all started operations in order to visualize operation AIS presentation
- // over the object
- Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
- aViewer->AddZLayer(myVisualLayerId);
-
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->startSketch(theOperation);
}
mySketchMgr->startNestedSketch(theOperation);
}
- std::shared_ptr<PartSet_CustomPrs> aCustomPrs =
- std::dynamic_pointer_cast<PartSet_CustomPrs>(myCustomPrs);
- aCustomPrs->activate(theOperation->feature());
+ myCustomPrs->activate(theOperation->feature());
}
void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
{
+ myCustomPrs->deactivate();
+
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->stopSketch(theOperation);
}
else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->stopNestedSketch(theOperation);
}
- Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
- aViewer->RemoveZLayer(myVisualLayerId);
- myVisualLayerId = 0;
- std::shared_ptr<PartSet_CustomPrs> aCustomPrs =
- std::dynamic_pointer_cast<PartSet_CustomPrs>(myCustomPrs);
- aCustomPrs->deactivate();
}
ModuleBase_Operation* PartSet_Module::currentOperation() const
return aCanRedo;
}
+bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
+{
+ bool aValid = true;
+ if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature) {
+ // part features are removed in the PartSet module only.
+ if (aFeature->getKind() == PartSetPlugin_Part::ID())
+ aValid = false;
+ }
+ }
+ return aValid;
+}
+
bool PartSet_Module::canCommitOperation() const
{
return mySketchMgr->canCommitOperation();
return myMenuMgr->addViewerMenu(theMenu, theStdActions);
}
+void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
+{
+ myMenuMgr->updateViewerMenu(theStdActions);
+}
+
+
void PartSet_Module::activeSelectionModes(QIntList& theModes)
{
theModes.clear();
XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
- PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
+ PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
- aLabelWgt->setWorkshop(aXUIWorkshop);
connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
// 4. delete features
// sketch feature should be skipped, only sub-features can be removed
// when sketch operation is active
- std::set<FeaturePtr> anIgnoredFeatures;
- anIgnoredFeatures.insert(mySketchMgr->activeSketch());
- aWorkshop->deleteFeatures(aSketchObjects, anIgnoredFeatures);
-
+ aWorkshop->deleteFeatures(aSketchObjects);
// 5. stop operation
aWorkshop->displayer()->updateViewer();
aMgr->finishOperation();
aDisplayer->updateViewer();
}
-bool PartSet_Module::customizeObject(ObjectPtr theObject)
+void PartSet_Module::customizeObject(ObjectPtr theObject)
{
- std::shared_ptr<PartSet_CustomPrs> aCustomPrs =
- std::dynamic_pointer_cast<PartSet_CustomPrs>(myCustomPrs);
- bool isCustomized = false;
- if (aCustomPrs->isActive())
- isCustomized = aCustomPrs->customize(theObject);
- return isCustomized;
+ if (myCustomPrs->isActive())
+ myCustomPrs->customize(theObject);
}
void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
}
}
+ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
+{
+ ObjectPtr anObject;
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (aOperation) {
+ /// If last line finished on vertex the lines creation sequence has to be break
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ // if there is an active widget, find the presented object in it
+ if (!anActiveWidget)
+ anActiveWidget = aPanel->preselectionWidget();
+
+ ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
+ (anActiveWidget);
+ if (aWidgetValidated)
+ anObject = aWidgetValidated->findPresentedObject(theAIS);
+ }
+ return anObject;
+}
void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
{
bool hasResult = false;
bool hasFeature = false;
bool hasParameter = false;
- ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter);
+ bool hasSubFeature = false;
+ ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
ObjectPtr aObject = aObjects.first();
if (aObject) {
{
if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
// Do not change activation of parts if an operation active
- if (myWorkshop->currentOperation() && myWorkshop->currentOperation()->id().toStdString() != PartSetPlugin_Part::ID())
+ static QStringList aAllowActivationList;
+ if (aAllowActivationList.isEmpty())
+ aAllowActivationList <<
+ QString(PartSetPlugin_Part::ID().c_str()) <<
+ QString(PartSetPlugin_Duplicate::ID().c_str()) <<
+ QString(PartSetPlugin_Remove::ID().c_str());
+ if (myWorkshop->currentOperation() &&
+ (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
return;
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
}
}
}
+
+
+void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
+{
+ // z layer is created for all started operations in order to visualize operation AIS presentation
+ // over the object
+ Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ if (myVisualLayerId == 0) {
+ if (myVisualLayerId == 0)
+ aViewer->AddZLayer(myVisualLayerId);
+ } else {
+ TColStd_SequenceOfInteger aZList;
+ aViewer->GetAllZLayers(aZList);
+ bool aFound = false;
+ for (int i = 1; i <= aZList.Length(); i++) {
+ if (aZList(i) == myVisualLayerId) {
+ aFound = true;
+ break;
+ }
+ }
+ if (!aFound)
+ aViewer->AddZLayer(myVisualLayerId);
+ }
+}
