#include "PartSet_WidgetMultiSelector.h"
#include "PartSet_WidgetEditor.h"
#include "PartSet_WidgetFileSelector.h"
+#include "PartSet_WidgetSketchCreator.h"
#include "PartSet_SketcherMgr.h"
#include "PartSet_MenuMgr.h"
+#include "PartSet_CustomPrs.h"
+#include "PartSet_IconFactory.h"
+
+#include "PartSet_Filters.h"
+#include "PartSet_FilterInfinite.h"
#include <PartSetPlugin_Remove.h>
#include <PartSetPlugin_Part.h>
+#include <PartSetPlugin_Duplicate.h>
#include <ModuleBase_Operation.h>
#include <ModuleBase_IViewer.h>
#include <ModuleBase_IViewWindow.h>
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_WidgetEditor.h>
+#include <ModuleBase_WidgetValidated.h>
#include <ModuleBase_FilterFactory.h>
#include <ModuleBase_Tools.h>
#include <GeomValidators_ShapeType.h>
#include <GeomValidators_Face.h>
#include <GeomValidators_ConstructionComposite.h>
#include <GeomValidators_ZeroOffset.h>
+#include <GeomValidators_BooleanArguments.h>
+#include <GeomValidators_Different.h>
#include <ModelAPI_Object.h>
#include <ModelAPI_Data.h>
#include <ModelAPI_Session.h>
#include <ModelAPI_ShapeValidator.h>
+#include <ModelAPI_ResultBody.h>
#include <GeomDataAPI_Point2D.h>
#include <GeomDataAPI_Point.h>
#include <XGUI_ContextMenuMgr.h>
#include <XGUI_Tools.h>
#include <XGUI_ObjectsBrowser.h>
+#include <XGUI_SelectionMgr.h>
+#include <XGUI_DataModel.h>
#include <SketchPlugin_Feature.h>
#include <SketchPlugin_Sketch.h>
#include <SketchPlugin_Arc.h>
#include <SketchPlugin_Circle.h>
#include <SketchPlugin_Point.h>
+#include <SketchPlugin_ConstraintAngle.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <GeomAlgoAPI_FaceBuilder.h>
#include <GeomDataAPI_Dir.h>
+#include <SelectMgr_ListIteratorOfListOfFilter.hxx>
+
#ifdef _DEBUG
#include <QDebug>
#endif
-
-
/*!Create and return new instance of XGUI_Module*/
extern "C" PARTSET_EXPORT ModuleBase_IModule* createModule(ModuleBase_IWorkshop* theWshop)
{
: ModuleBase_IModule(theWshop),
myRestartingMode(RM_None), myVisualLayerId(0)
{
+ new PartSet_IconFactory();
+
mySketchMgr = new PartSet_SketcherMgr(this);
myDataModel = new PartSet_DocumentDataModel(this);
this, SLOT(onKeyRelease(ModuleBase_IViewWindow*, QKeyEvent*)));
connect(aViewer, SIGNAL(viewTransformed(int)),
SLOT(onViewTransformed(int)));
+ connect(aViewer, SIGNAL(viewCreated(ModuleBase_IViewWindow*)),
+ SLOT(onViewCreated(ModuleBase_IViewWindow*)));
myMenuMgr = new PartSet_MenuMgr(this);
+ myCustomPrs = new PartSet_CustomPrs(theWshop);
Events_Loop* aLoop = Events_Loop::loop();
aLoop->registerListener(this, Events_Loop::eventByName(EVENT_DOCUMENT_CHANGED));
+
+ mySelectionFilters.Append(new PartSet_GlobalFilter(myWorkshop));
+ mySelectionFilters.Append(new PartSet_FilterInfinite(myWorkshop));
}
PartSet_Module::~PartSet_Module()
{
- if (!myDocumentShapeFilter.IsNull())
- myDocumentShapeFilter.Nullify();
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ aFilter.Nullify();
+ }
+ delete myCustomPrs;
+}
+
+void PartSet_Module::activateSelectionFilters()
+{
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ myWorkshop->viewer()->addSelectionFilter(aFilter);
+ }
+}
+
+void PartSet_Module::deactivateSelectionFilters()
+{
+ SelectMgr_ListIteratorOfListOfFilter aIt(mySelectionFilters);
+ for (; aIt.More(); aIt.Next()) {
+ Handle(SelectMgr_Filter) aFilter = aIt.Value();
+ if (!aFilter.IsNull())
+ myWorkshop->viewer()->removeSelectionFilter(aFilter);
+ }
}
void PartSet_Module::registerValidators()
aFactory->registerValidator("PartSet_HVDirSelection", new PartSet_HVDirSelection);
aFactory->registerValidator("PartSet_TangentSelection", new PartSet_TangentSelection);
aFactory->registerValidator("PartSet_FilletSelection", new PartSet_FilletSelection);
+ aFactory->registerValidator("PartSet_AngleSelection", new PartSet_AngleSelection);
aFactory->registerValidator("PartSet_DifferentObjects", new PartSet_DifferentObjectsValidator);
aFactory->registerValidator("PartSet_DifferentShapes", new ModelAPI_ShapeValidator);
+ aFactory->registerValidator("PartSet_CoincidentAttr", new PartSet_CoincidentAttr);
+
aFactory->registerValidator("GeomValidators_ShapeType", new GeomValidators_ShapeType);
aFactory->registerValidator("GeomValidators_Face", new GeomValidators_Face);
aFactory->registerValidator("GeomValidators_ZeroOffset",
new GeomValidators_ZeroOffset);
+ aFactory->registerValidator("GeomValidators_BooleanArguments",
+ new GeomValidators_BooleanArguments);
+
aFactory->registerValidator("PartSet_SketchEntityValidator",
new PartSet_SketchEntityValidator);
aFactory->registerValidator("PartSet_SameTypeAttr",
new PartSet_SameTypeAttrValidator);
+
+ aFactory->registerValidator("GeomValidators_Different",
+ new GeomValidators_Different);
}
void PartSet_Module::registerFilters()
Config_Prop::Integer, SKETCH_WIDTH);
}
-void PartSet_Module::operationCommitted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationCommitted(ModuleBase_Operation* theOperation)
{
if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->commitNestedSketch(theOperation);
// the selection is cleared after commit the create operation
// in order to do not use the same selected objects in the restarted operation
// for common behaviour, the selection is cleared even if the operation is not restarted
- Handle(AIS_InteractiveContext) aContext = myWorkshop->viewer()->AISContext();
- if (!aContext.IsNull())
- aContext->ClearSelected();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
+ XGUI_Workshop* aWorkshop = aConnector->workshop();
+ aWorkshop->selector()->clearSelection();
/// Restart sketcher operations automatically
FeaturePtr aFeature = theOperation->feature();
myRestartingMode = RM_None;
}
-void PartSet_Module::operationAborted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationAborted(ModuleBase_Operation* theOperation)
{
breakOperationSequence();
}
-void PartSet_Module::sendOperation(ModuleBase_Operation* theOperation)
-{
- // Install the document filter before any other filter
- if (myDocumentShapeFilter.IsNull())
- myDocumentShapeFilter = new PartSet_GlobalFilter(myWorkshop);
- myWorkshop->viewer()->addSelectionFilter(myDocumentShapeFilter);
-
- ModuleBase_IModule::sendOperation(theOperation);
-}
-
-void PartSet_Module::operationStarted(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationStarted(ModuleBase_Operation* theOperation)
{
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
- Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
- aViewer->AddZLayer(myVisualLayerId);
mySketchMgr->startSketch(theOperation);
}
else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->startNestedSketch(theOperation);
}
+
+ myCustomPrs->activate(theOperation->feature());
}
-void PartSet_Module::operationStopped(ModuleBase_Operation* theOperation)
+void PartSet_Module::onOperationStopped(ModuleBase_Operation* theOperation)
{
+ myCustomPrs->deactivate();
+
if (PartSet_SketcherMgr::isSketchOperation(theOperation)) {
mySketchMgr->stopSketch(theOperation);
- Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
- aViewer->RemoveZLayer(myVisualLayerId);
- myVisualLayerId = 0;
}
else if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation)) {
mySketchMgr->stopNestedSketch(theOperation);
}
- myWorkshop->viewer()->removeSelectionFilter(myDocumentShapeFilter);
}
ModuleBase_Operation* PartSet_Module::currentOperation() const
return aCanRedo;
}
+bool PartSet_Module::canApplyAction(const ObjectPtr& theObject, const QString& theActionId) const
+{
+ bool aValid = true;
+ if (theActionId == "DELETE_CMD" || theActionId == "MOVE_CMD") {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature) {
+ // part features are removed in the PartSet module only.
+ if (aFeature->getKind() == PartSetPlugin_Part::ID())
+ aValid = false;
+ }
+ }
+ return aValid;
+}
+
+bool PartSet_Module::canCommitOperation() const
+{
+ return mySketchMgr->canCommitOperation();
+}
+
bool PartSet_Module::canDisplayObject(const ObjectPtr& theObject) const
{
// the sketch manager put the restriction to the objects display
return mySketchMgr->canDisplayObject(theObject);
}
+bool PartSet_Module::canActivateSelection(const ObjectPtr& theObject) const
+{
+ bool aCanActivate = ModuleBase_IModule::canActivateSelection(theObject);
+
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isSketchOp = PartSet_SketcherMgr::isSketchOperation(anOperation),
+ isNestedOp = PartSet_SketcherMgr::isNestedSketchOperation(anOperation);
+ if (isSketchOp || isNestedOp) {
+ // in active sketch operation it is possible to activate operation object in selection
+ // in the edit operation, e.g. points of the line can be moved when the line is edited
+ aCanActivate = aCanActivate || anOperation->isEditOperation();
+ }
+ return aCanActivate;
+}
bool PartSet_Module::addViewerMenu(QMenu* theMenu, const QMap<QString, QAction*>& theStdActions) const
{
return myMenuMgr->addViewerMenu(theMenu, theStdActions);
}
+void PartSet_Module::updateViewerMenu(const QMap<QString, QAction*>& theStdActions)
+{
+ myMenuMgr->updateViewerMenu(theStdActions);
+}
+
+
void PartSet_Module::activeSelectionModes(QIntList& theModes)
{
theModes.clear();
}
}
}
- } else {
- // Start editing constraint
- if (theOperation->isEditOperation()) {
- // TODO: #391 - to be removed
- std::string aId = theOperation->id().toStdString();
- if (PartSet_SketcherMgr::isNestedSketchOperation(theOperation) &&
- PartSet_SketcherMgr::isDistanceOperation(theOperation)) {
- // Find and activate widget for management of point for dimension line position
- QList<ModuleBase_ModelWidget*> aWidgets = aPanel->modelWidgets();
- foreach (ModuleBase_ModelWidget* aWgt, aWidgets) {
- PartSet_WidgetPoint2D* aPntWgt = dynamic_cast<PartSet_WidgetPoint2D*>(aWgt);
- if (aPntWgt) {
- aPanel->activateWidget(aPntWgt);
- return;
- }
- }
- }
- }
}
}
std::string aId = aFeature->getKind();
if ((aId == SketchPlugin_ConstraintRadius::ID()) ||
(aId == SketchPlugin_ConstraintLength::ID()) ||
- (aId == SketchPlugin_ConstraintDistance::ID())) {
+ (aId == SketchPlugin_ConstraintDistance::ID()) ||
+ (aId == SketchPlugin_ConstraintAngle::ID())) {
editFeature(aFeature);
}
}
ModuleBase_ModelWidget* PartSet_Module::createWidgetByType(const std::string& theType, QWidget* theParent,
Config_WidgetAPI* theWidgetApi, std::string theParentId)
{
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(workshop());
- XGUI_Workshop* aWorkshop = aConnector->workshop();
+ ModuleBase_IWorkshop* aWorkshop = workshop();
+ XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(aWorkshop);
+ XGUI_Workshop* aXUIWorkshop = aConnector->workshop();
ModuleBase_ModelWidget* aWgt = NULL;
if (theType == "sketch-start-label") {
- PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent,
+ PartSet_WidgetSketchLabel* aLabelWgt = new PartSet_WidgetSketchLabel(theParent, aWorkshop,
theWidgetApi, theParentId, mySketchMgr->isConstraintsShown());
- aLabelWgt->setWorkshop(aWorkshop);
connect(aLabelWgt, SIGNAL(planeSelected(const std::shared_ptr<GeomAPI_Pln>&)),
mySketchMgr, SLOT(onPlaneSelected(const std::shared_ptr<GeomAPI_Pln>&)));
connect(aLabelWgt, SIGNAL(showConstraintToggled(bool)),
mySketchMgr, SLOT(onShowConstraintsToggle(bool)));
aWgt = aLabelWgt;
} else if (theType == "sketch-2dpoint_selector") {
- PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, theWidgetApi, theParentId);
- aPointWgt->setWorkshop(aWorkshop);
+ PartSet_WidgetPoint2D* aPointWgt = new PartSet_WidgetPoint2D(theParent, aWorkshop,
+ theWidgetApi, theParentId);
aPointWgt->setSketch(mySketchMgr->activeSketch());
connect(aPointWgt, SIGNAL(vertexSelected()), this, SLOT(onVertexSelected()));
aWgt = aPointWgt;
} else if (theType == "point2ddistance") {
- PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent, theWidgetApi, theParentId);
- aDistanceWgt->setWorkshop(aWorkshop);
+ PartSet_WidgetPoint2dDistance* aDistanceWgt = new PartSet_WidgetPoint2dDistance(theParent,
+ aWorkshop, theWidgetApi, theParentId);
aDistanceWgt->setSketch(mySketchMgr->activeSketch());
aWgt = aDistanceWgt;
} else if(theType == "point2dangle") {
- PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent, theWidgetApi, theParentId);
- anAngleWgt->setWorkshop(aWorkshop);
+ PartSet_WidgetPoint2dAngle* anAngleWgt = new PartSet_WidgetPoint2dAngle(theParent,
+ aWorkshop, theWidgetApi, theParentId);
anAngleWgt->setSketch(mySketchMgr->activeSketch());
aWgt = anAngleWgt;
} else if (theType == "sketch_shape_selector") {
PartSet_WidgetShapeSelector* aShapeSelectorWgt =
- new PartSet_WidgetShapeSelector(theParent, workshop(), theWidgetApi, theParentId);
+ new PartSet_WidgetShapeSelector(theParent, aWorkshop, theWidgetApi, theParentId);
aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aShapeSelectorWgt;
} else if (theType == "sketch_multi_selector") {
PartSet_WidgetMultiSelector* aShapeSelectorWgt =
- new PartSet_WidgetMultiSelector(theParent, workshop(), theWidgetApi, theParentId);
+ new PartSet_WidgetMultiSelector(theParent, aWorkshop, theWidgetApi, theParentId);
aShapeSelectorWgt->setSketcher(mySketchMgr->activeSketch());
aWgt = aShapeSelectorWgt;
} else if (theType == WDG_DOUBLEVALUE_EDITOR) {
- aWgt = new PartSet_WidgetEditor(theParent, workshop(), theWidgetApi, theParentId);
+ aWgt = new PartSet_WidgetEditor(theParent, aWorkshop, theWidgetApi, theParentId);
} else if (theType == "export_file_selector") {
- aWgt = new PartSet_WidgetFileSelector(theParent, workshop(), theWidgetApi, theParentId);
- }
+ aWgt = new PartSet_WidgetFileSelector(theParent, aWorkshop, theWidgetApi, theParentId);
+ } else if (theType == "sketch_launcher") {
+ aWgt = new PartSet_WidgetSketchCreator(theParent, this, theWidgetApi, theParentId);
+ }
return aWgt;
}
QObjectPtrList::const_iterator anIt = aSelectedObj.begin(), aLast = aSelectedObj.end();
for ( ; anIt != aLast; anIt++) {
ObjectPtr anObject = *anIt;
- if (mySketchMgr->isObjectOfSketch(anObject))
- aSketchObjects.append(anObject);
+ if (mySketchMgr->isObjectOfSketch(anObject)) {
+ // sketch feature should be used in this list because workshop deletes features only
+ // results are skipped
+ FeaturePtr aSketchFeature = ModelAPI_Feature::feature(anObject);
+ aSketchObjects.append(aSketchFeature);
+ }
}
// if the selection contains only local selected presentations from other sketches,
// the Delete operation should not be done at all
// 4. delete features
// sketch feature should be skipped, only sub-features can be removed
// when sketch operation is active
- std::set<FeaturePtr> anIgnoredFeatures;
- anIgnoredFeatures.insert(mySketchMgr->activeSketch());
- aWorkshop->deleteFeatures(aSketchObjects, anIgnoredFeatures);
-
+ aWorkshop->deleteFeatures(aSketchObjects);
// 5. stop operation
aWorkshop->displayer()->updateViewer();
aMgr->finishOperation();
} else {
+ bool isPartRemoved = false;
// Delete part with help of PartSet plugin
// TODO: the deleted objects has to be processed by multiselection
QObjectPtrList aObjects = myWorkshop->selection()->selectedObjects();
ObjectPtr aObj = aObjects.first();
FeaturePtr aFeature = std::dynamic_pointer_cast<ModelAPI_Feature>(aObj);
if (aFeature.get() && (aFeature->getKind() == PartSetPlugin_Part::ID())) {
- std::shared_ptr<ModelAPI_Document> aDoc = aMgr->activeDocument();
- aMgr->startOperation(PartSetPlugin_Remove::ID());
- FeaturePtr aFeature = aDoc->addFeature(PartSetPlugin_Remove::ID());
- aFeature->execute();
- aMgr->finishOperation();
- } else
- return false;
- } else
- return false;
+ // Remove feature should be created in the document of the part results
+ ResultPtr aPartResult = aFeature->firstResult();
+ if (aPartResult.get()) {
+ std::shared_ptr<ModelAPI_ResultPart> aPart =
+ std::dynamic_pointer_cast<ModelAPI_ResultPart>(aPartResult);
+ DocumentPtr aPartDoc = aPart->partDoc();
+ if (aPartDoc.get()) {
+ aMgr->startOperation(PartSetPlugin_Remove::ID());
+ FeaturePtr aFeature = aPartDoc->addFeature(PartSetPlugin_Remove::ID());
+ aFeature->execute();
+ aMgr->finishOperation();
+ isPartRemoved = true;
+ }
+ }
+ }
+ }
+ return isPartRemoved;
}
return true;
}
+void PartSet_Module::onFeatureTriggered()
+{
+ SessionPtr aMgr = ModelAPI_Session::get();
+ // 1. check whether the delete should be processed in the module
+ ModuleBase_Operation* anOperation = myWorkshop->currentOperation();
+ bool isNestedOp = PartSet_SketcherMgr::isNestedCreateOperation(anOperation);
+ if (isNestedOp) {
+ // in case if in the viewer nothing is displayed, the create operation should not be
+ // comitted even if all values of the feature are initialized
+ if (!mySketchMgr->canDisplayCurrentCreatedFeature()) {
+ QAction* aCmd = dynamic_cast<QAction*>(sender());
+ //Do nothing on uncheck
+ if (aCmd->isCheckable() && !aCmd->isChecked())
+ return;
+
+ // the action information should be saved before the operation is aborted
+ // because this abort leads to update command status, which unchecks this action
+ anOperation->abort();
+
+ launchOperation(aCmd->data().toString());
+ }
+ }
+ ModuleBase_IModule::onFeatureTriggered();
+}
void PartSet_Module::onObjectDisplayed(ObjectPtr theObject, AISObjectPtr theAIS)
{
}
}
+void PartSet_Module::onBeforeObjectErase(ObjectPtr theObject, AISObjectPtr theAIS)
+{
+ // it should be recomputed in order to disappear in the viewer if the corresponded object
+ // is erased
+ if (myCustomPrs->isActive())
+ myCustomPrs->customize(theObject);
+}
+
void PartSet_Module::onViewTransformed(int theTrsfType)
{
// Set length of arrows constant in pixel size
return;
double aLen = aView->Convert(20);
+ double aPrevLen = SketcherPrs_Tools::getArrowSize();
SketcherPrs_Tools::setArrowSize(aLen);
+ const double aPrevScale = aViewer->Scale(aViewer->activeView());
+ const double aCurScale = aViewer->activeView()->Camera()->Scale();
+ aViewer->SetScale(aViewer->activeView(), aCurScale);
+ SketcherPrs_Tools::setTextHeight (aCurScale / aPrevScale * SketcherPrs_Tools::getTextHeight());
bool isModified = false;
QList<AISObjectPtr> aPrsList = aDisplayer->displayedPresentations();
foreach (AISObjectPtr aAIS, aPrsList) {
aDisplayer->updateViewer();
}
+void PartSet_Module::customizeObject(ObjectPtr theObject)
+{
+ if (myCustomPrs->isActive())
+ myCustomPrs->customize(theObject);
+}
void PartSet_Module::customizeObjectBrowser(QWidget* theObjectBrowser)
{
aPalet.setColor(QPalette::Text, QColor(0, 72, 140));
aLabel->setPalette(aPalet);
aOB->treeView()->setExpandsOnDoubleClick(false);
+#ifdef ModuleDataModel
connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
SLOT(onTreeViewDoubleClick(const QModelIndex&)));
+ connect(aOB, SIGNAL(headerMouseDblClicked(const QModelIndex&)),
+ SLOT(onTreeViewDoubleClick(const QModelIndex&)));
connect(aOB->treeView(), SIGNAL(doubleClicked(const QModelIndex&)),
myDataModel, SLOT(onMouseDoubleClick(const QModelIndex&)));
+#endif
}
}
+ObjectPtr PartSet_Module::findPresentedObject(const AISObjectPtr& theAIS) const
+{
+ ObjectPtr anObject;
+ ModuleBase_Operation* aOperation = myWorkshop->currentOperation();
+ if (aOperation) {
+ /// If last line finished on vertex the lines creation sequence has to be break
+ ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ ModuleBase_ModelWidget* anActiveWidget = aPanel->activeWidget();
+ // if there is an active widget, find the presented object in it
+ if (!anActiveWidget)
+ anActiveWidget = aPanel->preselectionWidget();
+
+ ModuleBase_WidgetValidated* aWidgetValidated = dynamic_cast<ModuleBase_WidgetValidated*>
+ (anActiveWidget);
+ if (aWidgetValidated)
+ anObject = aWidgetValidated->findPresentedObject(theAIS);
+ }
+ return anObject;
+}
void PartSet_Module::addObjectBrowserMenu(QMenu* theMenu) const
{
bool hasResult = false;
bool hasFeature = false;
bool hasParameter = false;
- ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter);
+ bool hasSubFeature = false;
+ ModuleBase_Tools::checkObjects(aObjects, hasResult, hasFeature, hasParameter, hasSubFeature);
ObjectPtr aObject = aObjects.first();
if (aObject) {
if (hasParameter || hasFeature)
theMenu->addAction(myMenuMgr->action("EDIT_CMD"));
}
+
+ ResultBodyPtr aResult = std::dynamic_pointer_cast<ModelAPI_ResultBody>(aObject);
+ if( aResult.get() )
+ {
+ theMenu->addAction(myMenuMgr->action("SELECT_PARENT_CMD"));
+ }
} else { // If feature is 0 the it means that selected root object (document)
if (aMgr->activeDocument() != aMgr->moduleDocument())
theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
if (aMgr->activeDocument() != aMgr->moduleDocument())
theMenu->addAction(myMenuMgr->action("ACTIVATE_PARTSET_CMD"));
}
+ bool aCanDeactivate = (myWorkshop->currentOperation() == 0);
+ myMenuMgr->action("ACTIVATE_PARTSET_CMD")->setEnabled(aCanDeactivate);
+ myMenuMgr->action("DEACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
+ myMenuMgr->action("ACTIVATE_PART_CMD")->setEnabled(aCanDeactivate);
}
void PartSet_Module::processEvent(const std::shared_ptr<Events_Message>& theMessage)
{
if (theMessage->eventID() == Events_Loop::loop()->eventByName(EVENT_DOCUMENT_CHANGED)) {
+ // Do not change activation of parts if an operation active
+ static QStringList aAllowActivationList;
+ if (aAllowActivationList.isEmpty())
+ aAllowActivationList <<
+ QString(PartSetPlugin_Part::ID().c_str()) <<
+ QString(PartSetPlugin_Duplicate::ID().c_str()) <<
+ QString(PartSetPlugin_Remove::ID().c_str());
+ if (myWorkshop->currentOperation() &&
+ (!aAllowActivationList.contains(myWorkshop->currentOperation()->id())))
+ return;
XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
XGUI_Workshop* aWorkshop = aConnector->workshop();
XGUI_DataTree* aTreeView = aWorkshop->objectBrowser()->treeView();
SessionPtr aMgr = ModelAPI_Session::get();
DocumentPtr aActiveDoc = aMgr->activeDocument();
- DocumentPtr aDoc = aMgr->moduleDocument();
+#ifdef ModuleDataModel
QModelIndex aOldIndex = myDataModel->activePartTree();
+ DocumentPtr aDoc = aMgr->moduleDocument();
if (aActiveDoc == aDoc) {
if (aOldIndex.isValid())
aTreeView->setExpanded(aOldIndex, false);
}
}
}
+#else
+ // Problem with MPV: At first time on creation it doesn't work because Part feature
+ // creation event will be sent after
+ if (aActivePartIndex.isValid())
+ aTreeView->setExpanded(aActivePartIndex, false);
+ XGUI_DataModel* aDataModel = aWorkshop->objectBrowser()->dataModel();
+ aActivePartIndex = aDataModel->documentRootIndex(aActiveDoc);
+ if (aActivePartIndex.isValid())
+ aTreeView->setExpanded(aActivePartIndex, true);
+#endif
aLabel->setPalette(aPalet);
aWorkshop->updateCommandStatus();
void PartSet_Module::onTreeViewDoubleClick(const QModelIndex& theIndex)
{
+ if (myWorkshop->currentOperation()) // Do not change activation of parts if an operation active
+ return;
+ SessionPtr aMgr = ModelAPI_Session::get();
+ if (!theIndex.isValid()) {
+ aMgr->setActiveDocument(aMgr->moduleDocument());
+ return;
+ }
if (theIndex.column() != 0) // Use only first column
return;
ObjectPtr aObj = myDataModel->object(theIndex);
}
}
if (aPart.get()) { // if this is a part
- SessionPtr aMgr = ModelAPI_Session::get();
if (aPart->partDoc() == aMgr->activeDocument()) {
aMgr->setActiveDocument(aMgr->moduleDocument());
} else {
aPart->activate();
}
}
-}
\ No newline at end of file
+}
+
+
+void PartSet_Module::onViewCreated(ModuleBase_IViewWindow*)
+{
+ // z layer is created for all started operations in order to visualize operation AIS presentation
+ // over the object
+ Handle(V3d_Viewer) aViewer = myWorkshop->viewer()->AISContext()->CurrentViewer();
+ if (myVisualLayerId == 0) {
+ if (myVisualLayerId == 0)
+ aViewer->AddZLayer(myVisualLayerId);
+ } else {
+ TColStd_SequenceOfInteger aZList;
+ aViewer->GetAllZLayers(aZList);
+ bool aFound = false;
+ for (int i = 1; i <= aZList.Length(); i++) {
+ if (aZList(i) == myVisualLayerId) {
+ aFound = true;
+ break;
+ }
+ }
+ if (!aFound)
+ aViewer->AddZLayer(myVisualLayerId);
+ }
+}
