#include "OCCViewer_ViewWindow.h"
#include "OCCViewer_ViewModel.h"
-#include <Basics_OCCTVersion.hxx>
-
#include <SUIT_ViewManager.h>
#include <SUIT_ViewModel.h>
#include <Visual3d_View.hxx>
#include <V3d_Viewer.hxx>
-#if OCC_VERSION_LARGE > 0x06070000
+#if OCC_VERSION_LARGE > 0x06070100
#include <V3d_View.hxx>
#else
#include <V3d_PerspectiveView.hxx>
// VSR: 01/07/2010 commented to avoid SIGSEGV at SALOME exit
//selectVisualId();
-#if OCC_VERSION_LARGE > 0x06070000
+#if OCC_VERSION_LARGE > 0x06070100
myActiveView = new V3d_View( viewer, type );
#else
if ( type == V3d_ORTHOGRAPHIC ) {
*/
OCCViewer_ViewPort3d::~OCCViewer_ViewPort3d()
{
- emit vpClosed();
+ emit vpClosed(this);
Handle(V3d_View) aView = activeView();
if (!aView.IsNull())
aView->Remove();
view->View()->Deactivate();
}
- /* create static trihedron (16551: EDF PAL 501) */
- OCCViewer_ViewWindow* aVW = dynamic_cast<OCCViewer_ViewWindow*>( parentWidget()->parentWidget()->parentWidget() );
- if ( aVW ) {
- OCCViewer_Viewer* aViewModel = dynamic_cast<OCCViewer_Viewer*>( aVW->getViewManager()->getViewModel() );
- if ( aViewModel && aViewModel->isStaticTrihedronDisplayed() ){
- view->ZBufferTriedronSetup();
- view->TriedronDisplay( Aspect_TOTP_LEFT_LOWER, Quantity_NOC_WHITE, 0.05, V3d_ZBUFFER );
- }
- }
-
- emit( vpMapped() );
+ emit( vpMapped(this) );
return true;
}
refView->Up( x, y, z ); tgtView->SetUp( x, y, z );
refView->Eye( x, y, z ); tgtView->SetEye( x, y, z );
refView->Proj( x, y, z ); tgtView->SetProj( x, y, z );
-#if OCC_VERSION_LARGE <= 0x06070000
+#if OCC_VERSION_LARGE <= 0x06070100
refView->Center( x, y ); tgtView->SetCenter( x, y );
#endif
tgtView->SetScale( refView->Scale() );
if ( activeView().IsNull() ) return;
if ( !myBackground.isValid() ) return;
- // VSR: Important note on below code.
- // In OCCT (in version 6.5.2), things about the background drawing
- // are not straightforward and not clearly understandable:
- // - Horizontal gradient is drawn vertically (!), well ok, from top side to bottom one.
- // - Vertical gradient is drawn horizontally (!), from right side to left one (!!!).
- // - First and second diagonal gradients are confused.
- // - Image texture, once set, can not be removed (!).
- // - Texture image fill mode Aspect_FM_NONE is not taken into account (and means the same
- // as Aspect_FM_CENTERED).
- // - The only way to cancel gradient background (and get back to single colored) is to
- // set gradient background style to Aspect_GFM_NONE while passing two colors is also needed
- // (see V3d_View::SetBgGradientColors() function).
- // - Also, it is impossible to draw texture image above the gradiented background (only above
- // single-colored).
- // In OCCT 6.5.3 all above mentioned problems are fixed; so, above comment should be removed as soon
- // as SALOME is migrated to OCCT 6.5.3. The same concerns #ifdef statements in the below code
switch ( myBackground.mode() ) {
case Qtx::ColorBackground:
{
// Unset texture should be done here
// ...
Quantity_Color qCol( c.red()/255., c.green()/255., c.blue()/255., Quantity_TOC_RGB );
-#if OCC_VERSION_LARGE > 0x06050200 // available since OCCT 6.5.3
activeView()->SetBgGradientStyle( Aspect_GFM_NONE ); // cancel gradient background
activeView()->SetBgImageStyle( Aspect_FM_NONE ); // cancel texture background
-#else
- // cancel gradient background (in OCC before v6.5.3 the only way to do this is to set it to NONE type passing arbitrary colors as parameters)
- activeView()->SetBgGradientColors( qCol, qCol, Aspect_GFM_NONE );
-#endif
// then change background color
activeView()->SetBackgroundColor( qCol );
// update viewer
activeView()->SetBgImageStyle( Aspect_FM_NONE ); // cancel texture background
switch ( type ) {
case OCCViewer_Viewer::HorizontalGradient:
-#if OCC_VERSION_LARGE > 0x06050200 // available since OCCT 6.5.3
activeView()->SetBgGradientColors( qCol1, qCol2, Aspect_GFM_HOR, Standard_True );
-#else
- // in OCCT before v6.5.3, to draw horizontal gradient it's necessary to use Aspect_GFM_VER type
- // and interchange the colors
- activeView()->SetBgGradientColors( qCol2, qCol1, Aspect_GFM_VER, Standard_True );
-#endif
break;
case OCCViewer_Viewer::VerticalGradient:
-#if OCC_VERSION_LARGE > 0x06050200 // available since OCCT 6.5.3
activeView()->SetBgGradientColors( qCol1, qCol2, Aspect_GFM_VER, Standard_True );
-#else
- // in OCCT before v6.5.3, to draw vertical gradient it's necessary to use Aspect_GFM_HOR type
- activeView()->SetBgGradientColors( qCol1, qCol2, Aspect_GFM_HOR, Standard_True );
-#endif
break;
case OCCViewer_Viewer::Diagonal1Gradient:
-#if OCC_VERSION_LARGE > 0x06050200 // available since OCCT 6.5.3
activeView()->SetBgGradientColors( qCol1, qCol2, Aspect_GFM_DIAG1, Standard_True );
-#else
- // in OCCT before v6.5.3, to draw 1st dialognal gradient it's necessary to use Aspect_GFM_DIAG2 type
- // and interchange the colors
- activeView()->SetBgGradientColors( qCol2, qCol1, Aspect_GFM_DIAG2, Standard_True );
-#endif
break;
case OCCViewer_Viewer::Diagonal2Gradient:
-#if OCC_VERSION_LARGE > 0x06050200 // available since OCCT 6.5.3
activeView()->SetBgGradientColors( qCol1, qCol2, Aspect_GFM_DIAG2, Standard_True );
-#else
- // in OCCT before v6.5.3, to draw 2nd dialognal gradient it's necessary to use Aspect_GFM_DIAG1 type
- activeView()->SetBgGradientColors( qCol1, qCol2, Aspect_GFM_DIAG1, Standard_True );
-#endif
break;
case OCCViewer_Viewer::Corner1Gradient:
activeView()->SetBgGradientColors( qCol1, qCol2, Aspect_GFM_CORNER1, Standard_True );
default:
break;
}
-#if OCC_VERSION_LARGE > 0x06050200 // available since OCCT 6.5.3
- // VSR: In OCCT before v6.5.3 below code can't be used because of very ugly bug - it has been impossible to
- // clear the background texture image as soon as it was once set to the viewer.
if ( myBackground.isTextureShown() ) {
QString fileName;
int textureMode = myBackground.texture( fileName );
activeView()->Update();
}
}
-#endif
}
/*!
*/
void OCCViewer_ViewPort3d::startZoomAtPoint( int x, int y )
{
-#if OCC_VERSION_LARGE > 0x0603000A // available only with OCC-6.3-sp11 and higher version
if ( !activeView().IsNull() && isAdvancedZoomingEnabled() )
activeView()->StartZoomAtPoint( x, y );
-#endif
}
/*!
// as OCCT respects a sign of only dx,
// but we want both signes to be taken into account
//activeView()->Zoom( x0, y0, x, y );
-#if OCC_VERSION_LARGE > 0x0603000A // available only with OCC-6.3-sp11 and higher version
if ( isAdvancedZoomingEnabled() )
activeView()->ZoomAtPoint( x0, y0, x, y );
else
-#endif
activeView()->Zoom( x0 + y0, 0, x + y, 0 );
emit vpTransformed( this );
}
{
if ( !activeView().IsNull() ) {
activeView()->ZFitAll( 1.0 );
-#if OCC_VERSION_LARGE <= 0x06070000
+#if OCC_VERSION_LARGE <= 0x06070100
activeView()->SetZSize( 0.0 );
#endif
activeView()->Update();
Standard_Real margin = 0.01;
-#if OCC_VERSION_LARGE > 0x06070000
+#if OCC_VERSION_LARGE > 0x06070100
activeView()->FitAll( margin, upd );
if(withZ)
activeView()->ZFitAll();
Handle(V3d_View) aView3d = getView();
Handle(V3d_View) aRefView3d = vp3d->getView();
aView3d->SetImmediateUpdate( Standard_False );
-#if OCC_VERSION_LARGE > 0x06070000
+#if OCC_VERSION_LARGE > 0x06070100
aView3d->Camera()->Copy( aRefView3d->Camera() );
#else
aView3d->SetViewMapping( aRefView3d->ViewMapping() );
/*
* Show/Hide static triedron
*/
-void OCCViewer_ViewPort3d::updateStaticTriedronVisibility() {
- OCCViewer_ViewWindow* aVW = dynamic_cast<OCCViewer_ViewWindow*>( parentWidget()->parentWidget()->parentWidget() );
- if ( aVW ) {
- OCCViewer_Viewer* aViewModel = dynamic_cast<OCCViewer_Viewer*>( aVW->getViewManager()->getViewModel() );
- Handle(V3d_View) aView = activeView();
- if ( aViewModel ){
- if(aViewModel->isStaticTrihedronDisplayed()) {
- aView->TriedronDisplay( Aspect_TOTP_LEFT_LOWER, Quantity_NOC_WHITE, 0.05, V3d_ZBUFFER );
- } else {
- aView->TriedronErase();
- }
- aView->Update();
- }
+void OCCViewer_ViewPort3d::showStaticTrihedron( bool on )
+{
+ Handle(V3d_View) aView = activeView();
+ if ( !aView ) return;
+
+ if ( on ) {
+ aView->ZBufferTriedronSetup();
+ aView->TriedronDisplay( Aspect_TOTP_LEFT_LOWER, Quantity_NOC_WHITE, 0.05, V3d_ZBUFFER );
+ } else {
+ aView->TriedronErase();
}
+ aView->Update();
}
