-// File: NMTTools_PaveFiller_6.cxx
-// Created: Fri Dec 19 10:27:31 2003
-// Author: Peter KURNEV
-// <pkv@irinox>
+// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+// File: NMTTools_PaveFiller_6.cxx
+// Created: Fri Dec 19 10:27:31 2003
+// Author: Peter KURNEV
-#include <NMTTools_PaveFiller.ixx>
+#include <NMTTools_PaveFiller.hxx>
+
+#include <Basics_OCCTVersion.hxx>
#include <Precision.hxx>
#include <TColStd_IndexedMapOfInteger.hxx>
#include <TColStd_MapOfInteger.hxx>
+#include <TColStd_MapIteratorOfMapOfInteger.hxx>
+#include <TColStd_DataMapOfIntegerListOfInteger.hxx>
+#include <TColStd_ListOfInteger.hxx>
+#include <TColStd_ListIteratorOfListOfInteger.hxx>
+#include <TColStd_DataMapIteratorOfDataMapOfIntegerListOfInteger.hxx>
-#include <Geom2d_Curve.hxx>
-#include <Geom_TrimmedCurve.hxx>
+#include <Geom_TrimmedCurve.hxx>
+#include <Geom2d_TrimmedCurve.hxx>
+#include <Geom2d_Curve.hxx>
#include <GeomAdaptor_Curve.hxx>
+#include <GeomAdaptor_Surface.hxx>
+#include <Geom_Surface.hxx>
+
#include <BndLib_Add3dCurve.hxx>
#include <TopoDS_Face.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Compound.hxx>
+#include <TopoDS_Vertex.hxx>
+#include <TopoDS_Edge.hxx>
#include <TopExp.hxx>
+#include <BRepLib.hxx>
#include <BRep_Builder.hxx>
#include <BRep_Tool.hxx>
#include <BRepBndLib.hxx>
#include <TopTools_IndexedMapOfShape.hxx>
+#include <TopTools_IndexedDataMapOfShapeListOfShape.hxx>
+#include <TopTools_ListOfShape.hxx>
+#include <TopTools_ListIteratorOfListOfShape.hxx>
#include <BOPTColStd_IndexedDataMapOfIntegerIndexedMapOfInteger.hxx>
#include <BOPTColStd_IndexedDataMapOfIntegerInteger.hxx>
#include <IntTools_SequenceOfCurves.hxx>
#include <IntTools_FaceFace.hxx>
#include <IntTools_Tools.hxx>
+#include <IntTools_ShrunkRange.hxx>
+#include <IntTools_Context.hxx>
#include <BOPTools_CArray1OfSSInterference.hxx>
-#include <BOPTools_ListIteratorOfListOfInterference.hxx>
-#include <BOPTools_CArray1OfInterferenceLine.hxx>
-#include <BOPTools_InterferenceLine.hxx>
-#include <BOPTools_ListOfInterference.hxx>
-#include <BOPTools_Interference.hxx>
-#include <BOPTools_InterferencePool.hxx>
+#include <BOPTools_VSInterference.hxx>
+#include <BOPTools_ESInterference.hxx>
#include <BOPTools_SSInterference.hxx>
#include <BOPTools_ListOfPaveBlock.hxx>
#include <BOPTools_ListIteratorOfListOfPaveBlock.hxx>
#include <BOPTools_Tools.hxx>
#include <BOPTools_PaveBlockIterator.hxx>
#include <BOPTools_Tools2D.hxx>
+#include <BOPTools_Tools3D.hxx>
+#include <BOPTools_Curve.hxx>
+#include <NMTDS_Iterator.hxx>
#include <NMTDS_ShapesDataStructure.hxx>
+#include <NMTDS_InterfPool.hxx>
+
+#include <NMTTools_Tools.hxx>
#include <NMTTools_IndexedDataMapOfShapePaveBlock.hxx>
+#include <NMTTools_CommonBlock.hxx>
#include <NMTTools_CommonBlockAPI.hxx>
-#include <Geom2d_Curve.hxx>
-#include <NMTTools_Tools.hxx>
-#include <BRepLib.hxx>
-#include <Geom2d_TrimmedCurve.hxx>
-
-static
- Standard_Boolean IsPairFound(const Standard_Integer nF1,
- const Standard_Integer nF2,
- BOPTools_InterferencePool* myIntrPool,
- BOPTColStd_IndexedDataMapOfIntegerIndexedMapOfInteger& aMapWhat,
- BOPTColStd_IndexedDataMapOfIntegerIndexedMapOfInteger& aMapWith);
+#include <NMTTools_ListOfCommonBlock.hxx>
+#include <NMTTools_ListIteratorOfListOfCommonBlock.hxx>
+#include <NMTTools_DataMapOfIntegerListOfPaveBlock.hxx>
+#include <NMTTools_ListIteratorOfListOfCommonBlock.hxx>
+#include <NMTTools_DataMapIteratorOfDataMapOfIntegerListOfPaveBlock.hxx>
+#include <NMTTools_MapOfPaveBlock.hxx>
+#include <NMTTools_MapIteratorOfMapOfPaveBlock.hxx>
+#include <NMTTools_FaceInfo.hxx>
+#include <NMTTools_DataMapIteratorOfDataMapOfIntegerFaceInfo.hxx>
static
- void FMapWhat(const Standard_Integer nF,
- BOPTools_InterferencePool* myIntrPool,
- TColStd_IndexedMapOfInteger& aMapWhat);
-static
- void FMapWith(const Standard_Integer nF,
- BOPTools_InterferencePool* myIntrPool,
- TColStd_IndexedMapOfInteger& aMapWith);
-static
- Standard_Boolean IsFound(const TColStd_IndexedMapOfInteger& aMapWhat,
- const TColStd_IndexedMapOfInteger& aMapWith);
-
+ Standard_Boolean IsMicroEdge(const TopoDS_Edge& aE,
+ const Handle(IntTools_Context)& aCtx);
//=======================================================================
// function: PerformFF
-// purpose:
+// purpose:
//=======================================================================
- void NMTTools_PaveFiller::PerformFF()
+ void NMTTools_PaveFiller::PerformFF()
{
myIsDone=Standard_False;
//
- Standard_Boolean bIsFound, bJustAdd, bIsComputed;
- Standard_Integer n1, n2, anIndexIn, nF1, nF2, aBlockLength, aNbFFs;
Standard_Boolean bToApproxC3d, bToApproxC2dOnS1, bToApproxC2dOnS2, bIsDone;
+ Standard_Boolean bJustAdd, bToSplit;
+ Standard_Integer n1, n2, anIndexIn, nF1, nF2, aBlockLength, aNbFFs;
Standard_Integer aNbCurves, aNbPoints;
Standard_Real anApproxTol, aTolR3D, aTolR2D;
BOPTColStd_IndexedDataMapOfIntegerIndexedMapOfInteger aMapWhat, aMapWith;
IntTools_SequenceOfPntOn2Faces aPnts;
IntTools_SequenceOfCurves aCvs;
- BooleanOperations_KindOfInterference aTypeFF=BooleanOperations_SurfaceSurface;
//
- BOPTools_CArray1OfSSInterference& aFFs=myIntrPool->SSInterferences();
+ BOPTools_CArray1OfSSInterference& aFFs=myIP->SSInterferences();
//
// F/F Interferences [BooleanOperations_SurfaceSurface]
- myDSIt.Initialize(TopAbs_FACE, TopAbs_FACE);
+ myDSIt->Initialize(TopAbs_FACE, TopAbs_FACE);
//
// BlockLength correction
- aNbFFs=ExpectedPoolLength();
+ aNbFFs=myDSIt->BlockLength();
aBlockLength=aFFs.BlockLength();
if (aNbFFs > aBlockLength) {
aFFs.SetBlockLength(aNbFFs);
}
//
- for (; myDSIt.More(); myDSIt.Next()) {
- myDSIt.Current(n1, n2, bJustAdd);
- //
- bIsComputed=myIntrPool->IsComputed(n1, n2);
- if (bIsComputed) {
- continue;
- }
+ //modified by NIZNHY-PKV Thu Sep 15 08:02:52 2011f
+ bToSplit=Standard_False;
+ //modified by NIZNHY-PKV Thu Sep 15 08:02:55 2011t
+ //
+ for (; myDSIt->More(); myDSIt->Next()) {
+ myDSIt->Current(n1, n2, bJustAdd);
//
nF1 = n2;
nF2 = n1;
aPnts.Clear();
aCvs.Clear();
//
- bIsFound=IsPairFound(nF1, nF2, myIntrPool, aMapWhat, aMapWith);
- //
- if (bJustAdd) {
- if (!bIsFound) {
- myIntrPool->AddInterference (nF1, nF2, aTypeFF, anIndexIn);
- }
- else{
- BOPTools_SSInterference anInterf (nF1, nF2, 1.e-07, 1.e-07, aCvs, aPnts);
- anIndexIn=aFFs.Append(anInterf);
- myIntrPool->AddInterference (nF1, nF2, aTypeFF, anIndexIn);
- }
- continue;
- }
- //
- const TopoDS_Face& aF1=TopoDS::Face(myDS->Shape(nF1));
- const TopoDS_Face& aF2=TopoDS::Face(myDS->Shape(nF2));
+ const TopoDS_Face aF1=TopoDS::Face(myDS->Shape(nF1));//mpv
+ const TopoDS_Face aF2=TopoDS::Face(myDS->Shape(nF2));//mpv
//
// FF
bToApproxC3d = mySectionAttribute.Approximation();
//
IntTools_FaceFace aFF;
//
- aFF.SetParameters (bToApproxC3d, bToApproxC2dOnS1,
- bToApproxC2dOnS2, anApproxTol);
+ aFF.SetParameters (bToApproxC3d, bToApproxC2dOnS1,
+ bToApproxC2dOnS2, anApproxTol);
//
aFF.Perform(aF1, aF2);
//
bIsDone=aFF.IsDone();
//
if (!bIsDone) {
- if (!bIsFound) {
- myIntrPool->AddInterference (nF1, nF2, aTypeFF, anIndexIn);
- }
- else {
- BOPTools_SSInterference anInterf (nF1, nF2, 1.e-07, 1.e-07, aCvs, aPnts);
- anIndexIn=aFFs.Append(anInterf);
- myIntrPool->AddInterference (nF1, nF2, aTypeFF, anIndexIn);
- }
+ BOPTools_SSInterference anInterf (nF1, nF2, 1.e-07, 1.e-07, aCvs, aPnts);
+ anIndexIn=aFFs.Append(anInterf);
continue;
}
//
aTolR2D=aFF.TolReached2d();
if (aTolR3D < 1.e-7){
aTolR3D=1.e-7;
- }
+ }
//
+ //modified by NIZNHY-PKV Thu Sep 15 08:03:02 2011f
+#if OCC_VERSION_LARGE > 0x06050100 // For OCCT6.5.2 and higher
+ aFF.PrepareLines3D(bToSplit);
+#else
aFF.PrepareLines3D();
+#endif // OCC_VERSION_LARGE > 0x06050100 // For OCCT6.5.2 and higher
+ //modified by NIZNHY-PKV Thu Sep 15 08:03:04 2011t
//
const IntTools_SequenceOfCurves& aCvsX=aFF.Lines();
const IntTools_SequenceOfPntOn2Faces& aPntsX=aFF.Points();
if (!aNbCurves && !aNbPoints) {
BOPTools_SSInterference anInterf (nF1, nF2, 1.e-07, 1.e-07, aCvs, aPnts);
anIndexIn=aFFs.Append(anInterf);
- myIntrPool->AddInterference (nF1, nF2, aTypeFF, anIndexIn);
continue;
}
//
{
BOPTools_SSInterference anInterf (nF1, nF2, aTolR3D, aTolR2D, aCvsX, aPntsX);
anIndexIn=aFFs.Append(anInterf);
- myIntrPool->AddInterference (nF1, nF2, aTypeFF, anIndexIn);
}
//
- }// for (; myDSIt.More(); myDSIt.Next())
+ }// for (; myDSIt.More(); myDSIt.Next())
//
myIsDone=Standard_True;
}
+
//=======================================================================
// function: MakeBlocks
-// purpose:
+// purpose:
//=======================================================================
- void NMTTools_PaveFiller::MakeBlocks()
+void NMTTools_PaveFiller::MakeBlocks()
{
myIsDone=Standard_False;
//
- Standard_Boolean bIsExistingPaveBlock, bIsValidIn2D;
- Standard_Integer i, aNbFFs, nF1, nF2, aBid=0;
+ Standard_Boolean bIsExistingPaveBlock, bIsValidIn2D, bIsCoincided;
+ Standard_Boolean bIsMicroEdge, bHasES;
+ Standard_Integer i, aNbFFs, nF1, nF2;
Standard_Integer nV1, nV2, j, aNbCurves;
Standard_Real aTolR3D, aTol2D, aT1, aT2, aTolPPC=Precision::PConfusion();
+ TopoDS_Face aF1, aF2;
NMTTools_IndexedDataMapOfShapePaveBlock aMEPB;
BooleanOperations_IndexedDataMapOfShapeInteger aMapEI;
- BOPTools_ListIteratorOfListOfPaveBlock anIt;
+ BOPTools_ListIteratorOfListOfPaveBlock anIt;
//
- BOPTools_CArray1OfSSInterference& aFFs=myIntrPool->SSInterferences();
+ BOPTools_CArray1OfSSInterference& aFFs=myIP->SSInterferences();
//
- // 1. Produce Section Edges from intersection curves
- // between each pair of faces
+
//
+ // 1. Make Section Edges from intersection curves
+ // between each pair of faces
aNbFFs=aFFs.Extent();
+ if (!aNbFFs) {
+ return;
+ }
+ //
+ FillFaceInfo();
+ //
for (i=1; i<=aNbFFs; ++i) {
+ BOPTools_ListOfPaveBlock aLPB;
+ TColStd_MapOfInteger aMVStick;
+ TopTools_ListOfShape aLSE;
+ TColStd_ListOfInteger aLNE;
+ BOPTools_PaveSet aPSF;
+ NMTTools_MapOfPaveBlock aMPBX;
+ TColStd_MapIteratorOfMapOfInteger aItMI;
+ NMTTools_MapIteratorOfMapOfPaveBlock aItMPB;
+ //
BOPTools_SSInterference& aFFi=aFFs(i);
- //
+ //
// Faces
aFFi.Indices(nF1, nF2);
- const TopoDS_Face& aF1=TopoDS::Face(myDS->Shape(nF1));
- const TopoDS_Face& aF2=TopoDS::Face(myDS->Shape(nF2));
+ aF1=*((TopoDS_Face*)(&myDS->Shape(nF1)));
+ aF2=*((TopoDS_Face*)(&myDS->Shape(nF2)));
//
- BOPTools_ListOfPaveBlock aLPB, aLPBC;
+ SharedEdges(nF1, nF2, aLNE, aLSE);
+ aFFi.SetSharedEdges(aLNE);
//
- //modified by NIZNHY-PKV Fri Mar 11 15:43:02 2005 f
- {
- Standard_Integer nFj1, nFj2, nE;
- TColStd_IndexedMapOfInteger aMFence;
- BOPTools_ListOfPaveBlock aLPBCx;
- //
- for (j=1; j<=aNbFFs; ++j) {
- BOPTools_SSInterference& aFFj=aFFs(j);
- aFFj.Indices(nFj1, nFj2);
- //
- if ((nF1==nFj1 && nFj2!=nF2) ||
- (nF1==nFj2 && nFj1!=nF2) ||
- (nF2==nFj1 && nFj2!=nF1) ||
- (nF2==nFj2 && nFj1!=nF1)) {
- RealSplitsInFace (aBid, nFj1, nFj2, aLPBCx);
- RealSplitsInFace (aBid, nFj2, nFj1, aLPBCx);
- RealSplitsOnFace (aBid, nFj1, nFj2, aLPBCx);
+ // aMVStick
+ const NMTTools_FaceInfo& aFI1=myFaceInfo.Find(nF1);
+ const NMTTools_FaceInfo& aFI2=myFaceInfo.Find(nF2);
+ //
+ const TColStd_MapOfInteger& aMVOn1=aFI1.VerticesOn();
+ const TColStd_MapOfInteger& aMVIn1=aFI1.VerticesIn();
+ const TColStd_MapOfInteger& aMVOn2=aFI2.VerticesOn();
+ const TColStd_MapOfInteger& aMVIn2=aFI2.VerticesIn();
+ //
+ for (j=0; j<2; ++j) {
+ const TColStd_MapOfInteger& aMV1=(!j) ? aMVOn1 :aMVIn1;
+ aItMI.Initialize(aMV1);
+ for (; aItMI.More(); aItMI.Next()) {
+ nV1=aItMI.Key();
+ if (aMVOn2.Contains(nV1) || aMVIn2.Contains(nV1)) {
+ aMVStick.Add(nV1);
}
}
+ }
+ //
+ // aLPB
+ const NMTTools_MapOfPaveBlock& aMPBIn1=aFI1.PaveBlocksIn();
+ const NMTTools_MapOfPaveBlock& aMPBOn1=aFI1.PaveBlocksOn();
+ const NMTTools_MapOfPaveBlock& aMPBIn2=aFI2.PaveBlocksIn();
+ const NMTTools_MapOfPaveBlock& aMPBOn2=aFI2.PaveBlocksOn();
+ //
+ aMPBX.Clear();
+ for (j=0; j<4; ++j) {
+ NMTTools_MapOfPaveBlock *pMPB;
//
- anIt.Initialize(aLPBCx);
- for (; anIt.More(); anIt.Next()) {
- const BOPTools_PaveBlock& aPBCx=anIt.Value();
+ if (!j) {
+ pMPB=((NMTTools_MapOfPaveBlock*)&aMPBIn1);
+ }
+ else if (j==1) {
+ pMPB=((NMTTools_MapOfPaveBlock*)&aMPBOn1);
+ }
+ else if (j==2) {
+ pMPB=((NMTTools_MapOfPaveBlock*)&aMPBIn2);
+ }
+ else if (j==3) {
+ pMPB=((NMTTools_MapOfPaveBlock*)&aMPBOn2);
+ }
+ //
+ const NMTTools_MapOfPaveBlock& aMPB=*pMPB;
+ aItMPB.Initialize(aMPB);
+ for (; aItMPB.More(); aItMPB.Next()) {
+ const BOPTools_PaveBlock& aPB=aItMPB.Key();
+ if (aMPBX.Add(aPB)) {
+ aLPB.Append(aPB);
+ }
//
- nE=aPBCx.Edge();
- if (!aMFence.Contains(nE)) {
- aMFence.Add(nE);
- aLPBC.Append(aPBCx);
+ else {
+ if (j>1) {
+ aFFi.AppendBlock(aPB);
+ }
}
+ //
}
}
//
- //modified by NIZNHY-PKV Fri Apr 1 09:49:57 2005t
- //
- RealSplitsInFace (aBid, nF1, nF2, aLPB);
- RealSplitsInFace (aBid, nF2, nF1, aLPB);
- RealSplitsOnFace (aBid, nF1, nF2, aLPB);
- //
- anIt.Initialize(aLPB);
- for (; anIt.More(); anIt.Next()) {
- const BOPTools_PaveBlock& aPB=anIt.Value();
- aFFi.AppendBlock(aPB);
- }
- //
BOPTools_SequenceOfCurves& aSCvs=aFFi.Curves();
aNbCurves=aSCvs.Length();
if (!aNbCurves) {
aTolR3D=aFFi.TolR3D();
aTol2D=(aTolR3D < 1.e-3) ? 1.e-3 : aTolR3D;
//
- BOPTools_PaveSet aPSF;
+ CorrectTolR3D(aFFi, aMVStick, aTolR3D);
//
- //modified by NIZNHY-PKV Fri Apr 1 10:53:09 2005f
- PrepareSetForFace (nF1, nF2, aLPBC, aPSF);
- //PrepareSetForFace (nF1, nF2, aPSF);
- //modified by NIZNHY-PKV Thu Mar 31 16:16:47 2005t
+ PrepareSetForFace (nF1, nF2, aLPB, aPSF);
//
// Put Paves On Curves
for (j=1; j<=aNbCurves; ++j) {
BOPTools_Curve& aBC=aSCvs(j);
- // DEBUG
const IntTools_Curve& aC=aBC.Curve();
- Handle (Geom_Curve) aC3D= aC.Curve();
- //
+ // DEBUG f
+ Handle(Geom_Curve) aC3D = aC.Curve();
+ // DEBUG t
PutPaveOnCurve (aPSF, aTolR3D, aBC);
}
//
BOPTools_Curve& aBC=aSCvs(j);
PutBoundPaveOnCurve (aBC, aFFi);
}
+ //modified by NIZNHY-PKV Wed Sep 14 13:12:14 2011f
+#if OCC_VERSION_LARGE > 0x06050100 // For OCCT6.5.2 and higher
+ //
+ // Put closing pave if needded
+ for (j=1; j<=aNbCurves; ++j) {
+ BOPTools_Curve& aBC=aSCvs(j);
+ PutClosingPaveOnCurve (aBC, aFFi);
+ }
+#endif // OCC_VERSION_LARGE > 0x06050100 // For OCCT6.5.2 and higher
+ //modified by NIZNHY-PKV Wed Sep 14 13:12:17 2011t
//
// Pave Blocks on Curves
+ bHasES=Standard_False;
for (j=1; j<=aNbCurves; ++j) {
BOPTools_Curve& aBC=aSCvs(j);
const IntTools_Curve& aIC= aBC.Curve();
//
BOPTools_PaveBlockIterator aPBIter(0, aPaveSet);
for (; aPBIter.More(); aPBIter.Next()) {
- BOPTools_PaveBlock& aPBNew=aPBIter.Value();
- aPBNew.SetCurve(aIC);
- aPBNew.SetFace1(nF1);
- aPBNew.SetFace2(nF2);
- //
- nV1=aPBNew.Pave1().Index();
- nV2=aPBNew.Pave2().Index();
- aT1=aPBNew.Pave1().Param();
- aT2=aPBNew.Pave2().Param();
- // ???
- if((nV1==nV2) && (Abs(aT2 - aT1) < aTolPPC)) {
- continue;// mkk ft
- }
- //
- //modified by NIZNHY-PKV Fri Apr 1 09:56:11 2005f
- // 1
- const BOPTools_ListOfPaveBlock& aLPBFF=aFFi.PaveBlocks();
- bIsExistingPaveBlock=IsExistingPaveBlock(aPBNew, aLPBFF, aTolR3D);
- //bIsExistingPaveBlock=IsExistingPaveBlock(aPBNew, aFFi);
- if (bIsExistingPaveBlock) {
- continue;
- }
- // 2
- bIsExistingPaveBlock=IsExistingPaveBlock(aPBNew, aLPBC, aTolR3D);
- if (bIsExistingPaveBlock) {
- continue;
- }
- //modified by NIZNHY-PKV Fri Apr 1 09:56:14 2005t
- // Checking of validity in 2D
- //
- bIsValidIn2D=myContext.IsValidBlockForFaces(aT1, aT2, aIC, aF1, aF2, aTol2D);
- if (!bIsValidIn2D) {
- continue;
- }
- //
- //aBC.AppendNewBlock(aPBNew);
- //
- // Make Section Edge
- TopoDS_Edge aES;
- //
- const TopoDS_Vertex& aV1=TopoDS::Vertex(myDS->Shape(nV1));
- const TopoDS_Vertex& aV2=TopoDS::Vertex(myDS->Shape(nV2));
- //
- BOPTools_Tools::MakeSectEdge (aIC, aV1, aT1, aV2, aT2, aES);
+ BOPTools_PaveBlock& aPBNew=aPBIter.Value();
+ aPBNew.SetCurve(aIC);
+ aPBNew.SetFace1(nF1);
+ aPBNew.SetFace2(nF2);
+ //
+ nV1=aPBNew.Pave1().Index();
+ nV2=aPBNew.Pave2().Index();
+ aT1=aPBNew.Pave1().Param();
+ aT2=aPBNew.Pave2().Param();
+ //
+ if((nV1==nV2) && (Abs(aT2 - aT1) < aTolPPC)) {
+ continue;// mkk ft ???
+ }
+ //
+ // 1
+ bIsExistingPaveBlock=IsExistingPaveBlock(aPBNew, aLPB, aTolR3D);
+ if (bIsExistingPaveBlock) {
+ continue;
+ }
+ //
+ bIsCoincided=CheckCoincidence(aPBNew, aLPB);
+ if(bIsCoincided) {
+ continue;
+ }
+ //
+ // 2
+ bIsExistingPaveBlock=IsExistingPaveBlock(aPBNew, aLSE, aTolR3D);
+ if (bIsExistingPaveBlock) {
+ continue;
+ }
//
- {
- Standard_Real aTolR2D;
- //
- aTolR2D=aFFi.TolR2D();
- Handle(Geom2d_Curve) aC2D1=aIC.FirstCurve2d();
- Handle(Geom2d_Curve) aC2D2=aIC.SecondCurve2d();
- //
- NMTTools_Tools::MakePCurve(aES, aF1, aC2D1, aTolR2D);
- NMTTools_Tools::MakePCurve(aES, aF2, aC2D2, aTolR2D);
- }
- //
- aMEPB.Add(aES, aPBNew);
- aMapEI.Add(aES, i);
- }
+ // Checking of validity in 2D
+ //
+ bIsValidIn2D=myContext->IsValidBlockForFaces(aT1, aT2, aIC, aF1, aF2, aTol2D);
+ if (!bIsValidIn2D) {
+ continue;
+ }
+ //
+ //
+ // Make Section Edge
+ TopoDS_Edge aES;
+ //
+ const TopoDS_Vertex aV1=TopoDS::Vertex(myDS->Shape(nV1));
+ const TopoDS_Vertex aV2=TopoDS::Vertex(myDS->Shape(nV2));
+ //
+ {
+ Standard_Real aT;
+ //
+ myContext->IsVertexOnLine(aV1, aIC, aTolR3D, aT);
+ BOPTools_Tools::UpdateVertex (aIC, aT, aV1);
+ //
+ myContext->IsVertexOnLine(aV2, aIC, aTolR3D, aT);
+ BOPTools_Tools::UpdateVertex (aIC, aT, aV2);
+ }
+ //
+ BOPTools_Tools::MakeSectEdge (aIC, aV1, aT1, aV2, aT2, aES);
+ //
+ NMTTools_Tools::UpdateEdge (aES, aTolR3D);
+ bIsMicroEdge=IsMicroEdge(aES, myContext);
+ if (bIsMicroEdge) {
+ continue;
+ }
+ //
+ {
+ Handle(Geom2d_Curve) aC2D1, aC2D2;
+ //
+ aC2D1=aIC.FirstCurve2d();
+ aC2D2=aIC.SecondCurve2d();
+ //
+ NMTTools_Tools::MakePCurve(aES, aF1, aC2D1);
+ NMTTools_Tools::MakePCurve(aES, aF2, aC2D2);
+ }
+ //
+ aMEPB.Add(aES, aPBNew);
+ aMapEI.Add(aES, i);
+ //
+ bHasES=Standard_True;
+ }// for (; aPBIter.More(); aPBIter.Next())
} // end of for (j=1; j<=aNbCurves; ++j)
+ // qqf
+ if (bHasES) {
+ myIP->Add(nF1, nF2, Standard_True, NMTDS_TI_FF);
+ }
+ // qqt
}// for (i=1; i<=aNbFFs; ++i)
//=============================================================
//
- // II. Post treatment
+ // II. Post treatment
//
// Input data: aMEPB, aMapEI
// Result : section edges in myDS
if (!aNbSE) {
// there is nothing to do here
return;
- }
+ }
//
BRep_Builder aBB;
TopoDS_Compound aCompound;
//
//
// 2. Intersect SE using auxiliary Filler
- NMTDS_ShapesDataStructure tDS;
- //
- tDS.SetCompositeShape(aCompound);
- tDS.Init();
+ NMTTools_PaveFiller tPF;
//
- BOPTools_InterferencePool tIP(tDS);
- NMTTools_PaveFiller tPF(tIP);
+ tPF.SetCompositeShape(aCompound);
//
// 2.1.VV
tPF.Init();
tPF.PerformVV();
- tPF.PerformNewVertices();
//
// 2.2.VE
tPF.myPavePool.Resize (tPF.myNbEdges);
tPF.myCommonBlockPool.Resize (tPF.myNbEdges);
tPF.mySplitShapesPool.Resize (tPF.myNbEdges);
tPF.myPavePoolNew .Resize (tPF.myNbEdges);
-
+
tPF.PreparePaveBlocks(TopAbs_VERTEX, TopAbs_EDGE);
tPF.PreparePaveBlocks(TopAbs_EDGE, TopAbs_EDGE);
//
BOPTools_ListIteratorOfListOfPaveBlock aIt;
BOPTColStd_IndexedDataMapOfIntegerInteger aMNewOld;
//
+ const NMTDS_ShapesDataStructure& tDS=*(tPF.DS());
const BOPTools_SplitShapesPool& aSSP=tPF.mySplitShapesPool;
const NMTTools_CommonBlockPool& aCBP=tPF.myCommonBlockPool;
//
aNbLines=tDS.NumberOfInsertedShapes();
aNbOld=tDS.NumberOfShapesOfTheObject();
- //
+ //
// 3.1 Links between indices in tDS and DS (kept in aMNewOld)
//
// 3.1.1.Old vertices [ links ]
for (j=1; j<=aNbSE; ++j) {
const BOPTools_PaveBlock& aPBSE=aMEPB(j);
nV1=aPBSE.Pave1().Index();
- const TopoDS_Shape& aV1=myDS->Shape(nV1);
+ const TopoDS_Shape aV1=myDS->Shape(nV1);//mpv
if (aV1.IsSame(aV)) {
- aMNewOld.Add(i, nV1);
- break;
+ aMNewOld.Add(i, nV1);
+ break;
}
nV2=aPBSE.Pave2().Index();
- const TopoDS_Shape& aV2=myDS->Shape(nV2);
+ const TopoDS_Shape aV2=myDS->Shape(nV2);//mpv
if (aV2.IsSame(aV)) {
- aMNewOld.Add(i, nV2);
- break;
+ aMNewOld.Add(i, nV2);
+ break;
}
}
}
BOPTools_SSInterference& aFFi=aFFs(iFF);
BOPTools_SequenceOfCurves& aSCvs=aFFi.Curves();
//
- BOPTools_Curve& aBC=aSCvs(1);
+ BOPTools_Curve& aBC=aSCvs(1);
//
const BOPTools_ListOfPaveBlock& aLPB=aSSP(tDS.RefEdge(i));
aNbPB=aLPB.Extent();
BooleanOperations_AncestorsSeqAndSuccessorsSeq anASSeq;
//
nV1=aPBSE.Pave1().Index();
- const TopoDS_Shape& aV1=myDS->Shape(nV1);
+ const TopoDS_Shape aV1=myDS->Shape(nV1);//mpv
nV2=aPBSE.Pave2().Index();
- const TopoDS_Shape& aV2=myDS->Shape(nV2);
+ const TopoDS_Shape aV2=myDS->Shape(nV2);//mpv
//
anASSeq.SetNewSuccessor(nV1);
anASSeq.SetNewOrientation(aV1.Orientation());
//
nF1=aPBSE.Face1();
nF2=aPBSE.Face2();
- const TopoDS_Face& aF1=TopoDS::Face(myDS->Shape(nF1));
- const TopoDS_Face& aF2=TopoDS::Face(myDS->Shape(nF2));
//
const NMTTools_ListOfCommonBlock& aLCB=aCBP(tDS.RefEdge(i));
NMTTools_CommonBlockAPI aCBAPI(aLCB);
for (; aIt.More(); aIt.Next()) {
BOPTools_PaveBlock aPB=aIt.Value();
//
+ const TopoDS_Face aF1=TopoDS::Face(myDS->Shape(nF1));
+ const TopoDS_Face aF2=TopoDS::Face(myDS->Shape(nF2));
+ //
if (aCBAPI.IsCommonBlock(aPB)) {
- // it can be Common Block
- Standard_Boolean bHasPCOnF, bFound;
- Standard_Integer nF, k, nEOrx, nF1x, nF2x;
- Standard_Real aTolEx, aT1x, aT2x;
- BOPTools_ListIteratorOfListOfPaveBlock aItPBx;
- //
- NMTTools_CommonBlock& aCB=aCBAPI.CommonBlock(aPB);
- const BOPTools_ListOfPaveBlock& aLPBx=aCB.PaveBlocks();
- //
- aPB=aCB.PaveBlock1();
- mE=aPB.Edge(); // index of edge in tDS
- const TopoDS_Edge& aEx=TopoDS::Edge(tDS.Shape(mE));
- aTolEx=BRep_Tool::Tolerance(aEx);
- //
- for (k=0; k<2; ++k) {
- nF=(!k) ? nF1 : nF2;
- const TopoDS_Face& aF=TopoDS::Face(myDS->Shape(nF));
- //
- bHasPCOnF=BOPTools_Tools2D::HasCurveOnSurface(aEx, aF);
- if (bHasPCOnF) {
- continue;
- }
- //
- bFound=Standard_False;
- aItPBx.Initialize(aLPBx);
- for (; aItPBx.More(); aItPBx.Next()) {
- BOPTools_PaveBlock& aPBx=aIt.Value();
- nEOrx=aPBx.OriginalEdge();
- const TopoDS_Shape& aEOrx=tDS.Shape(nEOrx);
- BOPTools_PaveBlock& aPBSEx=aMEPB.ChangeFromKey(aEOrx);
- aT1x=aPBSEx.Pave1().Param();
- aT2x=aPBSEx.Pave2().Param();
- const IntTools_Curve& aICx=aPBSEx.Curve();
- //
- nF1x=aPBSEx.Face1();
- nF2x=aPBSEx.Face2();
- //
- if (nF1x==nF) {
- Handle(Geom2d_Curve) aC2D1x=aICx.FirstCurve2d();
- Handle(Geom2d_TrimmedCurve)aC2D1xT =new Geom2d_TrimmedCurve(aC2D1x, aT1x, aT2x);
- aBB.UpdateEdge(aEx, aC2D1xT, aF, aTolEx);
- bFound=!bFound;
- break;
- }
- //
- if (nF2x==nF) {
- Handle(Geom2d_Curve) aC2D2x=aICx.SecondCurve2d();
- Handle(Geom2d_TrimmedCurve)aC2D2xT =new Geom2d_TrimmedCurve(aC2D2x, aT1x, aT2x);
- aBB.UpdateEdge(aEx, aC2D2xT, aF, aTolEx);
- bFound=!bFound;
- break;
- }
- }
- if (bFound){
- BRepLib::SameParameter(aEx, aTolEx, Standard_True);
- }
- }
+ // it can be Common Block
+ Standard_Real aTolEx;
+ Handle(Geom2d_Curve) aC2D1, aC2D2;
+ TopoDS_Face aF1FWD, aF2FWD;
+ //
+ NMTTools_CommonBlock& aCB=aCBAPI.CommonBlock(aPB);
+ //const BOPTools_ListOfPaveBlock& aLPBx=aCB.PaveBlocks();
+ //
+ aPB=aCB.PaveBlock1();
+ mE=aPB.Edge(); // index of edge in tDS
+ const TopoDS_Edge& aEx=TopoDS::Edge(tDS.Shape(mE));
+ aTolEx=BRep_Tool::Tolerance(aEx);
+ //
+ aF1FWD=aF1;
+ aF1FWD.Orientation(TopAbs_FORWARD);
+ aF2FWD=aF2;
+ aF2FWD.Orientation(TopAbs_FORWARD);
+ //
+ NMTTools_Tools::MakePCurve(aEx, aF1FWD, aC2D1);
+ NMTTools_Tools::MakePCurve(aEx, aF2FWD, aC2D2);
+ NMTTools_Tools::UpdateEdge (aEx, aTolEx);
} //if (aCBAPI.IsCommonBlock(aPB))
//
// new SE
aT1=aPave1.Param();
mV1=aPave1.Index(); // index in tDS
nV1=aMNewOld.FindFromKey(mV1); // index in myDS
- const TopoDS_Shape& aV1=myDS->Shape(nV1);
+ const TopoDS_Shape aV1=myDS->Shape(nV1);//mpv
//
const BOPTools_Pave& aPave2=aPB.Pave2();
aT2=aPave2.Param();
mV2=aPave2.Index();
nV2=aMNewOld.FindFromKey(mV2);
- const TopoDS_Shape& aV2=myDS->Shape(nV2);
+ const TopoDS_Shape aV2=myDS->Shape(nV2);//mpv
//
if (!aMNewOld.Contains(mE)) {
- // add new SE to the myDS
- BooleanOperations_AncestorsSeqAndSuccessorsSeq anASSeq;
- //
- anASSeq.SetNewSuccessor(nV1);
- anASSeq.SetNewOrientation(aV1.Orientation());
+ // add new SE to the myDS
+ BooleanOperations_AncestorsSeqAndSuccessorsSeq anASSeq;
+ //
+ anASSeq.SetNewSuccessor(nV1);
+ anASSeq.SetNewOrientation(aV1.Orientation());
- anASSeq.SetNewSuccessor(nV2);
- anASSeq.SetNewOrientation(aV2.Orientation());
-
- myDS->InsertShapeAndAncestorsSuccessors(aSp, anASSeq);
- nE=myDS->NumberOfInsertedShapes();
- //
- aMNewOld.Add(mE, nE);
+ anASSeq.SetNewSuccessor(nV2);
+ anASSeq.SetNewOrientation(aV2.Orientation());
+
+ myDS->InsertShapeAndAncestorsSuccessors(aSp, anASSeq);
+ nE=myDS->NumberOfInsertedShapes();
+ //
+ aMNewOld.Add(mE, nE);
}
else {
- nE=aMNewOld.FindFromKey(mE);
+ nE=aMNewOld.FindFromKey(mE);
}
// Form PaveBlock;
BOPTools_PaveBlock aPBx;
aPBx.SetEdge(nE);
//
aBC.AppendNewBlock(aPBx);
- }// for (; aIt.More(); aIt.Next())
- }// for (i=1; i<=aNbOld; ++i)
+ }// for (; aIt.More(); aIt.Next())
+ }// for (i=1; i<=aNbOld; ++i)
//
myIsDone=Standard_True;
}
+
//=======================================================================
// function: MakePCurves
-// purpose:
+// purpose:
//=======================================================================
- void NMTTools_PaveFiller::MakePCurves()
+void NMTTools_PaveFiller::MakePCurves()
{
Standard_Integer i, aNb, nF1, nF2, nE;
+ Standard_Integer aNbCB, aNbF, nSp, nF;
+ TopAbs_ShapeEnum aType;
TopoDS_Face aF1FWD, aF2FWD;
+ TColStd_ListIteratorOfListOfInteger aItF;
BOPTools_ListIteratorOfListOfPaveBlock anIt;
+ NMTTools_ListIteratorOfListOfCommonBlock aItCB;
//
- BOPTools_CArray1OfSSInterference& aFFs=myIntrPool->SSInterferences();
+ BOPTools_CArray1OfSSInterference& aFFs=myIP->SSInterferences();
//
aNb=aFFs.Extent();
for (i=1; i<=aNb; i++) {
BOPTools_SSInterference& aFF=aFFs(i);
aFF.Indices(nF1, nF2);
//
- const TopoDS_Face& aF1=TopoDS::Face(myDS->Shape(nF1));
- const TopoDS_Face& aF2=TopoDS::Face(myDS->Shape(nF2));
+ const TopoDS_Face aF1=TopoDS::Face(myDS->Shape(nF1));//mpv
+ const TopoDS_Face aF2=TopoDS::Face(myDS->Shape(nF2));//mpv
//
aF1FWD=aF1;
aF1FWD.Orientation(TopAbs_FORWARD);
for (; anIt.More(); anIt.Next()) {
const BOPTools_PaveBlock& aPB=anIt.Value();
nE=aPB.Edge();
- const TopoDS_Edge& aE=TopoDS::Edge(myDS->Shape(nE));
-
+ const TopoDS_Edge aE=TopoDS::Edge(myDS->Shape(nE));//mpv
+
BOPTools_Tools2D::BuildPCurveForEdgeOnFace(aE, aF1FWD);
BOPTools_Tools2D::BuildPCurveForEdgeOnFace(aE, aF2FWD);
}
- }
+ }
+ // Check common blocks between edges and faces
+ // Build P-Curves if they were not built in previos block.
+ // The main case is :arguments for e.g aEdge, aFace -> no FFs,
+ // but p-curves are needed.
+ //
+ aNb=myDS->NumberOfShapesOfTheObject();
+ for (i=1; i<=aNb; ++i) {
+ const TopoDS_Shape& aS=myDS->Shape(i);
+ aType=aS.ShapeType();
+ //
+ if (aType!=TopAbs_EDGE) {
+ continue;
+ }
+ const TopoDS_Edge& aE=TopoDS::Edge(aS);
+ //
+ if (BRep_Tool::Degenerated(aE)) {
+ continue;
+ }
+ //
+ const NMTTools_ListOfCommonBlock& aLCB=myCommonBlockPool(myDS->RefEdge(i));
+ aNbCB=aLCB.Extent();
+ if (!aNbCB) {
+ continue;
+ }
+ //
+ aItCB.Initialize(aLCB);
+ for (; aItCB.More(); aItCB.Next()) {
+ const NMTTools_CommonBlock& aCB=aItCB.Value();
+ const BOPTools_PaveBlock &aPB1=aCB.PaveBlock1();
+ //
+ const TColStd_ListOfInteger& aLF=aCB.Faces();
+ aNbF=aLF.Extent();
+ if (!aNbF) {
+ continue;
+ }
+ //
+ nSp=aPB1.Edge();
+ const TopoDS_Edge aSp=TopoDS::Edge(myDS->Shape(nSp));//mpv
+ //
+ aItF.Initialize(aLF);
+ for (; aItF.More(); aItF.Next()) {
+ nF=aItF.Value();
+ aF1FWD=TopoDS::Face(myDS->Shape(nF));
+ aF1FWD.Orientation(TopAbs_FORWARD);
+ //
+ BOPTools_Tools2D::BuildPCurveForEdgeOnFace(aSp, aF1FWD);
+ } // for (; aItCB.More(); aItCB.Next()) {
+ }//if (aS.ShapeType()==TopAbs_EDGE) {
+ }
}
-//modified by NIZNHY-PKV Fri Apr 1 09:36:06 2005f
+
//=======================================================================
// function: IsExistingPaveBlock
-// purpose:
+// purpose:
//=======================================================================
- Standard_Boolean NMTTools_PaveFiller::IsExistingPaveBlock(const BOPTools_PaveBlock& aPBNew,
- const BOPTools_ListOfPaveBlock& aLPBR,
- const Standard_Real aTolR3D)
+Standard_Boolean NMTTools_PaveFiller::IsExistingPaveBlock(const BOPTools_PaveBlock& aPBNew,
+ const BOPTools_ListOfPaveBlock& aLPBR,
+ const Standard_Real aTolR3D)
{
Standard_Boolean bFlag;
Standard_Integer nVNew1, nVNew2, nV1, nV2, iC;
//
iC=CheckIntermediatePoint(aPBNew, aPBR, aTolR3D);
if (!iC) {
- return !bFlag;
+ return !bFlag;
}
}
}
return bFlag;
}
-//modified by NIZNHY-PKV Fri Apr 1 09:36:06 2005t
+
+//=======================================================================
+// function: IsExistingPaveBlock
+// purpose:
+//=======================================================================
+Standard_Boolean NMTTools_PaveFiller::IsExistingPaveBlock(const BOPTools_PaveBlock& aPBNew,
+ const TopTools_ListOfShape& aLSE,
+ const Standard_Real aTolR3D)
+{
+ Standard_Boolean bFlag;
+ Standard_Integer aNbSE, iC;
+ Standard_Real aTolE, aTol;
+ TopTools_ListIteratorOfListOfShape anIt;
+ //
+ bFlag=Standard_False;
+ //
+ aNbSE=aLSE.Extent();
+ if (!aNbSE) {
+ return bFlag;
+ }
+ //
+ anIt.Initialize(aLSE);
+ for (; anIt.More(); anIt.Next()) {
+ const TopoDS_Edge& aE=TopoDS::Edge(anIt.Value());
+ aTolE=BRep_Tool::Tolerance(aE);
+ aTol=aTolR3D;
+ if (aTolE>aTol) {
+ aTol=aTolE;
+ }
+ iC=CheckIntermediatePoint(aPBNew, aE, aTol);
+ if (!iC) {
+ return !bFlag;
+ }
+ }
+ return bFlag;
+}
+
//=======================================================================
// function: CheckIntermediatePoint
-// purpose:
+// purpose:
//=======================================================================
- Standard_Integer NMTTools_PaveFiller::CheckIntermediatePoint(const BOPTools_PaveBlock& aPB,
- const BOPTools_PaveBlock& aPBR,
- const Standard_Real aTolC)
-
+Standard_Integer NMTTools_PaveFiller::CheckIntermediatePoint(const BOPTools_PaveBlock& aPB,
+ const BOPTools_PaveBlock& aPBR,
+ const Standard_Real aTolC)
{
- Standard_Real aT11, aT12, aTM, aTmp;
Standard_Integer iVM, nE2;
+ //
+ nE2=aPBR.Edge();
+ const TopoDS_Edge aE2=TopoDS::Edge(myDS->Shape(nE2));//mpv
+ iVM=CheckIntermediatePoint(aPB, aE2, aTolC);
+ //
+ return iVM;
+}
+
+//=======================================================================
+// function: CheckIntermediatePoint
+// purpose:
+//=======================================================================
+Standard_Integer NMTTools_PaveFiller::CheckIntermediatePoint(const BOPTools_PaveBlock& aPB,
+ const TopoDS_Edge& aE2,
+ const Standard_Real aTolC)
+{
+ Standard_Real aT11, aT12, aTM, aTmp;
+ Standard_Integer iVM;
gp_Pnt aPM;
BRep_Builder aBB;
TopoDS_Vertex aVM;
- //
+ //
// Vertex
const BOPTools_Pave& aPave11=aPB.Pave1();
aT11=aPave11.Param();
- //
+ //
const BOPTools_Pave& aPave12=aPB.Pave2();
aT12=aPave12.Param();
//
//
aBB.MakeVertex (aVM, aPM, aTolC);
//
- //Edge
- nE2=aPBR.Edge();
- const TopoDS_Edge& aE2=TopoDS::Edge(myDS->GetShape(nE2));
- // VE
- iVM=myContext.ComputeVE(aVM, aE2, aTmp);
+ iVM=myContext->ComputeVE(aVM, aE2, aTmp);
//
return iVM;
}
+
//=======================================================================
// function: PutBoundPaveOnCurve
-// purpose:
+// purpose:
//=======================================================================
- void NMTTools_PaveFiller::PutBoundPaveOnCurve(BOPTools_Curve& aBC,
- BOPTools_SSInterference& aFFi)
-{
+void NMTTools_PaveFiller::PutBoundPaveOnCurve(BOPTools_Curve& aBC,
+ BOPTools_SSInterference& aFFi)
+{
Standard_Boolean bHasBounds, bVF;
Standard_Integer nF1, nF2;
Standard_Real aT1, aT2, aTolR3D;
aFFi.Indices(nF1, nF2);
aTolR3D=aFFi.TolR3D();
//
- const TopoDS_Face& aF1=TopoDS::Face(myDS->GetShape(nF1));
- const TopoDS_Face& aF2=TopoDS::Face(myDS->GetShape(nF2));
+ const TopoDS_Face aF1=TopoDS::Face(myDS->GetShape(nF1));//mpv
+ const TopoDS_Face aF2=TopoDS::Face(myDS->GetShape(nF2));//mpv
//
- bVF=myContext.IsValidPointForFaces (aP1, aF1, aF2, aTolR3D);
+ bVF=myContext->IsValidPointForFaces (aP1, aF1, aF2, aTolR3D);
if (bVF) {
PutBoundPaveOnCurve (aP1, aT1, aBC, aFFi);
}
//
- bVF=myContext.IsValidPointForFaces (aP2, aF1, aF2, aTolR3D);
+ bVF=myContext->IsValidPointForFaces (aP2, aF1, aF2, aTolR3D);
if (bVF) {
PutBoundPaveOnCurve (aP2, aT2, aBC, aFFi);
}
}
+
//=======================================================================
// function: PutBoundPaveOnCurve
-// purpose:
+// purpose:
//=======================================================================
- void NMTTools_PaveFiller::PutBoundPaveOnCurve(const gp_Pnt& aP,
- const Standard_Real aT,
- BOPTools_Curve& aBC,
- BOPTools_SSInterference& aFFi)
-{
+void NMTTools_PaveFiller::PutBoundPaveOnCurve(const gp_Pnt& aP,
+ const Standard_Real aT,
+ BOPTools_Curve& aBC,
+ BOPTools_SSInterference& aFFi)
+{
Standard_Boolean bFound1, bFound2;
Standard_Integer nV;
Standard_Real aTolV=aFFi.TolR3D();
TColStd_ListOfInteger& aTVs=aBC.TechnoVertices();
aTVs.Append(nV);
}
-
if (bFound1 && !bFound2) {
nV=aPave1.Index();
aPave.SetIndex(nV);
aPave.SetParam(aT);
aFFiPS.Append(aPave);
//
- const TopoDS_Vertex& aV=TopoDS::Vertex(myDS->Shape(nV));
+ const TopoDS_Vertex aV=TopoDS::Vertex(myDS->Shape(nV));//mpv
BOPTools_Tools::UpdateVertex (aIC, aT, aV);
}
-
+
if (!bFound1 && bFound2) {
nV=aPave2.Index();
aPave.SetIndex(nV);
aPave.SetParam(aT);
aCPS.Append(aPave);
//
- const TopoDS_Vertex& aV=TopoDS::Vertex(myDS->Shape(nV));
+ const TopoDS_Vertex aV=TopoDS::Vertex(myDS->Shape(nV));//mpv
BOPTools_Tools::UpdateVertex (aIC, aT, aV);
}
}
+
//=======================================================================
// function: FindPave
-// purpose:
+// purpose:
//=======================================================================
- Standard_Boolean NMTTools_PaveFiller::FindPave(const gp_Pnt& aP,
- const Standard_Real aTolPV,
- const BOPTools_PaveSet& aPS,
- BOPTools_Pave& aPave)
+Standard_Boolean NMTTools_PaveFiller::FindPave(const gp_Pnt& aP,
+ const Standard_Real aTolPV,
+ const BOPTools_PaveSet& aPS,
+ BOPTools_Pave& aPave)
{
Standard_Integer nV;
Standard_Boolean bIsVertex=Standard_False;
-
+
const BOPTools_ListOfPave& aLP=aPS.Set();
BOPTools_ListIteratorOfListOfPave anIt(aLP);
for (; anIt.More(); anIt.Next()) {
const BOPTools_Pave& aPC=anIt.Value();
nV=aPC.Index();
- const TopoDS_Vertex& aV=TopoDS::Vertex(myDS->Shape(nV));
+ const TopoDS_Vertex aV=TopoDS::Vertex(myDS->Shape(nV));//mpv
bIsVertex=IntTools_Tools::IsVertex (aP, aTolPV, aV);
if (bIsVertex) {
aPave=aPC;
}
return bIsVertex;
}
+
//=======================================================================
// function: PrepareSetForFace
-// purpose:
+// purpose:
//=======================================================================
- void NMTTools_PaveFiller::PrepareSetForFace(const Standard_Integer nF1,
- const Standard_Integer nF2,
- const BOPTools_ListOfPaveBlock& aLPBC,
- BOPTools_PaveSet& aPSF)
+void NMTTools_PaveFiller::PrepareSetForFace(const Standard_Integer ,//nF1,
+ const Standard_Integer ,//nF2,
+ const BOPTools_ListOfPaveBlock& aLPBC,
+ BOPTools_PaveSet& aPSF)
{
- Standard_Integer nV1, nV2;
+ Standard_Integer nV1, nV2;
TColStd_MapOfInteger aMap;
- BOPTools_ListOfPaveBlock aLPB1, aLPB2, aLPBS;
BOPTools_ListIteratorOfListOfPaveBlock anIt;
//
- RealSplitsFace(nF1, aLPB1);
- anIt.Initialize(aLPB1);
- for (; anIt.More(); anIt.Next()) {
- const BOPTools_PaveBlock& aPB=anIt.Value();
- aLPBS.Append(aPB);
- }
- //
- RealSplitsFace(nF2, aLPB2);
- anIt.Initialize(aLPB2);
- for (; anIt.More(); anIt.Next()) {
- const BOPTools_PaveBlock& aPB=anIt.Value();
- aLPBS.Append(aPB);
- }
- //
anIt.Initialize(aLPBC);
- for (; anIt.More(); anIt.Next()) {
- const BOPTools_PaveBlock& aPB=anIt.Value();
- aLPBS.Append(aPB);
- }
- //
- anIt.Initialize(aLPBS);
for (; anIt.More(); anIt.Next()) {
const BOPTools_PaveBlock& aPB=anIt.Value();
const BOPTools_Pave& aPave1=aPB.Pave1();
}
}
}
+
+//=======================================================================
+// function: CheckCoincidence
+// purpose:
+//=======================================================================
+Standard_Boolean NMTTools_PaveFiller::CheckCoincidence(const BOPTools_PaveBlock& aPBNew,
+ const BOPTools_ListOfPaveBlock& aLPBFF)
+{
+ Standard_Boolean bRet;
+ Standard_Real aTE;
+ Standard_Integer nV11, nV12, nV21, nV22, iVV, iVE, nE2;
+ Standard_Integer iV, iCount, iCountExt;
+ BOPTools_ListIteratorOfListOfPaveBlock anIt;
+ // V11
+ const BOPTools_Pave& aPave11=aPBNew.Pave1();
+ nV11=aPave11.Index();
+ const TopoDS_Vertex& aV11=TopoDS::Vertex(myDS->Shape(nV11));
+
+ // V12
+ const BOPTools_Pave& aPave12=aPBNew.Pave2();
+ nV12=aPave12.Index();
+ const TopoDS_Vertex& aV12=TopoDS::Vertex(myDS->Shape(nV12));
+ //
+ iCountExt=1;
+ iCount=0;
+ anIt.Initialize(aLPBFF);
+ for (; anIt.More(); anIt.Next()) {
+ iCount=0;
+ //
+ const BOPTools_PaveBlock& aPBR=anIt.Value();
+ // V21
+ const BOPTools_Pave& aPave21=aPBR.Pave1();
+ nV21=aPave21.Index();
+
+ // V22
+ const BOPTools_Pave& aPave22=aPBR.Pave2();
+ nV22=aPave22.Index();
+ //
+ if (nV11==nV21 || nV11==nV22 || nV12==nV21 || nV12==nV22) {
+ continue;
+ }
+ //
+ // E2
+ nE2=aPBR.Edge();
+ //
+ const TopoDS_Vertex& aV21=TopoDS::Vertex(myDS->Shape(nV21));
+ const TopoDS_Vertex& aV22=TopoDS::Vertex(myDS->Shape(nV22));
+ const TopoDS_Edge& aE2=TopoDS::Edge(myDS->Shape(nE2));
+ //
+ // VV
+ iV=0;
+ iVV=IntTools_Tools::ComputeVV (aV11, aV21);
+ if (!iVV) {
+ iCount++;
+ iV++;
+ if (iCount>iCountExt) {
+ break;
+ }
+ }
+ //
+ iVV=IntTools_Tools::ComputeVV (aV11, aV22);
+ if (!iVV) {
+ iCount++;
+ iV++;
+ if (iCount>iCountExt) {
+ break;
+ }
+ }
+ // VE
+ if (!iV) {
+ iVE=myContext->ComputeVE (aV11, aE2, aTE);
+ if (!iVE) {
+ iCount++;
+ if (iCount>iCountExt) {
+ break;
+ }
+ }
+ }
+ // VV
+ iV=0;
+ iVV=IntTools_Tools::ComputeVV (aV12, aV21);
+ if (!iVV) {
+ iCount++;
+ iV++;
+ if (iCount>iCountExt) {
+ break;
+ }
+ }
+ //
+ iVV=IntTools_Tools::ComputeVV (aV12, aV22);
+ if (!iVV) {
+ iCount++;
+ iV++;
+ if (iCount>iCountExt) {
+ break;
+ }
+ }
+ // VE
+ if (!iV) {
+ iVE=myContext->ComputeVE (aV12, aE2, aTE);
+ if (!iVE) {
+ iCount++;
+ if (iCount>iCountExt) {
+ break;
+ }
+ }
+ }
+ } // next aPBR
+ bRet=(Standard_Boolean)(iCount>iCountExt);
+ return bRet;
+}
+
+//=======================================================================
+//function : IsMicroEdge
+//purpose :
+//=======================================================================
+Standard_Boolean IsMicroEdge(const TopoDS_Edge& aE,
+ const Handle(IntTools_Context)& aCtx)
+{
+ Standard_Boolean bRet;
+ Standard_Integer iErr;
+ Standard_Real aT1, aT2, aTmp;
+ Handle(Geom_Curve) aC3D;
+ TopoDS_Vertex aV1, aV2;
+ IntTools_Range aR;
+ //
+ bRet=(BRep_Tool::Degenerated(aE) ||
+ !BRep_Tool::IsGeometric(aE));
+ if (bRet) {
+ return bRet;
+ }
+ //
+ aC3D=BRep_Tool::Curve(aE, aT1, aT2);
+ TopExp::Vertices(aE, aV1, aV2);
+ aT1=BRep_Tool::Parameter(aV1, aE);
+ aT2=BRep_Tool::Parameter(aV2, aE);
+ if (aT2<aT1) {
+ aTmp=aT1;
+ aT1=aT2;
+ aT2=aTmp;
+ }
+ //
+ aR.SetFirst(aT1);
+ aR.SetLast(aT2);
+ IntTools_ShrunkRange aSR (aE, aV1, aV2, aR, aCtx);
+ iErr=aSR.ErrorStatus();
+ bRet=!aSR.IsDone();
+ //
+ return bRet;
+}
//=======================================================================
// function: PutPaveOnCurve
-// purpose:
+// purpose:
//=======================================================================
- void NMTTools_PaveFiller::PutPaveOnCurve(const BOPTools_PaveSet& aPaveSet,
- const Standard_Real aTolR3D,
- BOPTools_Curve& aBC)
-{
+void NMTTools_PaveFiller::PutPaveOnCurve(const BOPTools_PaveSet& aPaveSet,
+ const Standard_Real aTolR3D,
+ BOPTools_Curve& aBC)
+{
Standard_Integer nV;
Standard_Boolean bIsVertexOnLine;
Standard_Real aT;
const BOPTools_Pave& aPave=anIt.Value();
//
nV=aPave.Index();
- const TopoDS_Vertex& aV=TopoDS::Vertex(myDS->Shape(nV));
+ const TopoDS_Vertex aV=TopoDS::Vertex(myDS->Shape(nV));
//
Bnd_Box aBBV;
BRepBndLib::Add(aV, aBBV);
if (aBBC.IsOut(aBBV)){
- continue;
+ continue;
}
//
- bIsVertexOnLine=myContext.IsVertexOnLine(aV, aC, aTolR3D, aT);
+ bIsVertexOnLine=myContext->IsVertexOnLine(aV, aC, aTolR3D, aT);
+ //
//
if (bIsVertexOnLine) {
BOPTools_Pave aPaveNew(nV, aT, BooleanOperations_SurfaceSurface);
BOPTools_PaveSet& aPS=aBC.Set();
aPS.Append(aPaveNew);
//<-B
- BOPTools_Tools::UpdateVertex (aC, aT, aV);
}
}
}
-/////////////
+//
//=======================================================================
-// function: IsPairFound
-// purpose:
+//function : FillFaceInfo
+//purpose :
//=======================================================================
-Standard_Boolean IsPairFound(const Standard_Integer nF1,
- const Standard_Integer nF2,
- BOPTools_InterferencePool* myIntrPool,
- BOPTColStd_IndexedDataMapOfIntegerIndexedMapOfInteger& aMapWhat,
- BOPTColStd_IndexedDataMapOfIntegerIndexedMapOfInteger& aMapWith)
+void NMTTools_PaveFiller::FillFaceInfo()
{
- Standard_Boolean bIsFound;
+ Standard_Integer i, aNbS, aNbFFs, nF, aNbVFs, aNbEFs, j, n1, n2, nX, aNbF;
+ TopAbs_ShapeEnum aType;
+ TopoDS_Shape aS;
+ TColStd_ListIteratorOfListOfInteger aItF;
+ BOPTools_ListIteratorOfListOfPaveBlock anItPB;
+ NMTTools_DataMapIteratorOfDataMapOfIntegerFaceInfo aItMFI;
+ NMTTools_ListIteratorOfListOfCommonBlock aItCB;
//
- if (!aMapWhat.Contains(nF1)) {
- TColStd_IndexedMapOfInteger aMWhat;
- FMapWhat(nF1, myIntrPool, aMWhat);
- aMapWhat.Add(nF1, aMWhat);
- }
+ myFaceInfo.Clear();
//
- if (!aMapWith.Contains(nF2)) {
- TColStd_IndexedMapOfInteger aMWith;
- FMapWith(nF2, myIntrPool, aMWith);
- aMapWith.Add(nF2, aMWith);
- }
+ BOPTools_CArray1OfSSInterference& aFFs=myIP->SSInterferences();
+ BOPTools_CArray1OfVSInterference& aVFs=myIP->VSInterferences();
+ BOPTools_CArray1OfESInterference& aEFs=myIP->ESInterferences();
//
- const TColStd_IndexedMapOfInteger& aMWht=aMapWhat.FindFromKey(nF1);
- const TColStd_IndexedMapOfInteger& aMWit=aMapWith.FindFromKey(nF2);
+ aNbFFs=aFFs.Extent();
+ if (!aNbFFs) {
+ return;
+ }
//
- bIsFound=IsFound(aMWht, aMWit);
+ // 0.
+ for (i=1; i<=aNbFFs; ++i) {
+ NMTTools_FaceInfo aFI;
+ //
+ BOPTools_SSInterference& aFFi=aFFs(i);
+ aFFi.Indices(n1, n2);
+ myFaceInfo.Bind(n1, aFI);
+ myFaceInfo.Bind(n2, aFI);
+ }
//
- return bIsFound;
+ // 1.
+ aNbS=myDS->NumberOfShapesOfTheObject();
+ for (i=1; i<=aNbS; ++i) {
+ aS=myDS->Shape(i);
+ aType=aS.ShapeType();
+ if (aType==TopAbs_EDGE) {
+ const NMTTools_ListOfCommonBlock& aLCB=myCommonBlockPool(myDS->RefEdge(i));
+ aItCB.Initialize(aLCB);
+ for (; aItCB.More(); aItCB.Next()) {
+ const NMTTools_CommonBlock& aCB=aItCB.Value();
+ const BOPTools_PaveBlock &aPB1=aCB.PaveBlock1();
+ const TColStd_ListOfInteger& aLF=aCB.Faces();
+ aNbF=aLF.Extent();
+ if (!aNbF) {
+ continue;
+ }
+ //
+ aItF.Initialize(aLF);
+ for (; aItF.More(); aItF.Next()) {
+ nF=aItF.Value();
+ if (!myFaceInfo.IsBound(nF)) {
+ continue;
+ }
+ //
+ NMTTools_FaceInfo& aFI=myFaceInfo.ChangeFind(nF);
+ aFI.ChangePaveBlocksIn().Add(aPB1);
+ //
+ n1=aPB1.Pave1().Index();
+ n2=aPB1.Pave2().Index();
+ aFI.ChangeVerticesIn().Add(n1);
+ aFI.ChangeVerticesIn().Add(n2);
+ }
+ }
+ }// if (aType==TopAbs_EDGE) {
+ else if (aType==TopAbs_FACE) {
+ if (!myFaceInfo.IsBound(i)) {
+ continue;
+ }
+ //
+ BOPTools_ListOfPaveBlock aLPBOn;
+ //
+ nF=i;
+ NMTTools_FaceInfo& aFI=myFaceInfo.ChangeFind(nF);
+ //
+ RealSplitsFace(nF, aLPBOn);
+ //
+ anItPB.Initialize(aLPBOn);
+ for (; anItPB.More(); anItPB.Next()) {
+ const BOPTools_PaveBlock &aPB=anItPB.Value();
+ aFI.ChangePaveBlocksOn().Add(aPB);
+ //
+ n1=aPB.Pave1().Index();
+ n2=aPB.Pave2().Index();
+ aFI.ChangeVerticesOn().Add(n1);
+ aFI.ChangeVerticesOn().Add(n2);
+ }
+ //
+ }// else if (aType==TopAbs_FACE) {
+ }// for (i=1; i<=aNbS; ++i) {
+ //
+ // 2.
+ aItMFI.Initialize(myFaceInfo);
+ for (; aItMFI.More(); aItMFI.Next()) {
+ nF=aItMFI.Key();
+ NMTTools_FaceInfo& aFI=*((NMTTools_FaceInfo*)&aItMFI.Value());
+ //
+ aFI.SetIndex(nF);
+ //
+ //
+ // 2.1 aVFs
+ aNbVFs=aVFs.Extent();
+ for (j=1; j<=aNbVFs; ++j) {
+ BOPTools_VSInterference& aVFj=aVFs(j);
+ aVFj.Indices(n1, n2);
+ if (nF==n1) {
+ aFI.ChangeVerticesIn().Add(n2);
+ }
+ else if (nF==n2){
+ aFI.ChangeVerticesIn().Add(n1);
+ }
+ }// for (j=1; j<=aNbVFs; ++j) {
+ //
+ // 2.2 aEFs
+ aNbEFs=aEFs.Extent();
+ for (j=1; j<=aNbEFs; ++j) {
+ BOPTools_ESInterference& aEFj=aEFs(j);
+ aEFj.Indices(n1, n2);
+ if (!(nF==n1 || nF==n2)) {
+ continue;
+ }
+ //
+ nX=aEFj.NewShape();
+ if (nX<1) {
+ continue;
+ }
+ //
+ aS=myDS->Shape(nX);
+ aType=aS.ShapeType();
+ if (aType!=TopAbs_VERTEX) {
+ continue;
+ }
+ //
+ aFI.ChangeVerticesIn().Add(nX);
+ }// for (j=1; j<=aNbEFs; ++j) {
+ }// for (; aItMFI.More(); aItMFI.Next()) {
}
+
+
+#include <gp_Pnt.hxx>
+#include <gp_Dir.hxx>
+#include <gp_Vec.hxx>
+#include <GeomAPI_ProjectPointOnSurf.hxx>
//=======================================================================
-// function: FMapWhat
-// purpose:
+//function : CorrectTolR3D
+//purpose : Attempt to correct the value of tolerance aTolR3D for
+// the intersection curve in order to
+// compel it to pass through the sticks.
+// Prerequisites:
+// 2. The are based on B-Spline surfaces;
+// 1. There is at least the one intersection curve;
+// 2. The faces have stick vertices to catch the curve;
+// 3. The intersection angle is rather small (0.7-7 deg)
+//
//=======================================================================
-void FMapWhat(const Standard_Integer nF,
- BOPTools_InterferencePool* myIntrPool,
- TColStd_IndexedMapOfInteger& aMapWhat)
-
-{
- Standard_Integer nE, nV;
-
-
+void NMTTools_PaveFiller::CorrectTolR3D(const BOPTools_SSInterference& aFF,
+ const TColStd_MapOfInteger& aMVStick,
+ Standard_Real& aTolR3D)
- BooleanOperations_ShapesDataStructure* myDS=myIntrPool->DS();
- BooleanOperations_OnceExplorer aExp(*myDS);
- //
- // What
- aMapWhat.Add(nF);
- aExp.Init(nF, TopAbs_VERTEX);
- for (; aExp.More(); aExp.Next()) {
- nV=aExp.Current();
- aMapWhat.Add(nV);
+{
+ Standard_Boolean bHasBounds;
+ Standard_Integer i, nF[2], nV, aNbCurves;
+ Standard_Real aT1, aT2, aU, aV, aT, aA, aTolV, aTolVmax;
+ Standard_Real aTolR, aTolTresh, aAmin, aAmax;
+ TColStd_MapIteratorOfMapOfInteger aIt;
+ gp_Pnt aP, aP1, aP2;
+ gp_Dir aDN[2];
+ gp_Vec aVT;
+ Handle(Geom_Surface) aS[2];
+ Handle(Geom_Curve) aC3D;
+ GeomAdaptor_Surface aGAS;
+ GeomAbs_SurfaceType aType;
+ TopoDS_Face aF[2];
+ //
+ aTolTresh=0.0005;
+ aAmin=0.012;// 0.7-7 deg
+ aAmax=0.12;
+ //
+ if (!aMVStick.Extent()) {
+ return;
}
//
- aExp.Init(nF, TopAbs_EDGE);
- for (; aExp.More(); aExp.Next()) {
- nE=aExp.Current();
- aMapWhat.Add(nE);
+ BOPTools_SSInterference& aFFi=*((BOPTools_SSInterference*)&aFF);
+ BOPTools_SequenceOfCurves& aSCvs=aFFi.Curves();
+ aNbCurves=aSCvs.Length();
+ if (aNbCurves!=1){
+ return;
}
-}
-//=======================================================================
-// function: FMapWith
-// purpose:
-//=======================================================================
-void FMapWith(const Standard_Integer nF,
- BOPTools_InterferencePool* myIntrPool,
- TColStd_IndexedMapOfInteger& aMapWith)
-{
- TColStd_IndexedMapOfInteger aMapWhat;
-
- FMapWhat(nF, myIntrPool, aMapWhat);
- //
- // With
- Standard_Integer i, aNb, anIndex, aWhat, aWith;
- BOPTools_ListIteratorOfListOfInterference anIt;
-
- const BOPTools_CArray1OfInterferenceLine& anArrIL= myIntrPool->InterferenceTable();
-
- aNb=aMapWhat.Extent();
- for (i=1; i<=aNb; i++) {
- aWhat=aMapWhat(i);
-
- const BOPTools_InterferenceLine& aWithLine=anArrIL(aWhat);
-
- const BOPTools_ListOfInterference& aLI=aWithLine.List();
- anIt.Initialize(aLI);
- for (; anIt.More(); anIt.Next()) {
- const BOPTools_Interference& anIntf=anIt.Value();
- anIndex=anIntf.Index();
- if (anIndex) {
- aWith=anIntf.With();
- aMapWith.Add(aWith);
- }
+ //
+ aFFi.Indices(nF[0], nF[1]);
+ for (i=0; i<2; ++i) {
+ aF[i]=*((TopoDS_Face*)(&myDS->Shape(nF[i])));
+ aS[i]=BRep_Tool::Surface(aF[i]);
+ aGAS.Load(aS[i]);
+ aType=aGAS.GetType();
+ if (aType!=GeomAbs_BSplineSurface) {
+ return;
}
}
-}
-//=======================================================================
-// function: IsFound
-// purpose:
-//=======================================================================
-Standard_Boolean IsFound(const TColStd_IndexedMapOfInteger& aMapWhat,
- const TColStd_IndexedMapOfInteger& aMapWith)
-{
- Standard_Boolean bFlag=Standard_False;
- Standard_Integer i, aNb, aWhat;
-
- aNb=aMapWhat.Extent();
- for (i=1; i<=aNb; i++) {
- aWhat=aMapWhat(i);
- if (aMapWith.Contains(aWhat)) {
- return !bFlag;
- }
+ //
+ BOPTools_Curve& aBC=aSCvs(1);
+ const IntTools_Curve& aIC=aBC.Curve();
+ bHasBounds=aIC.HasBounds();
+ if (!bHasBounds){
+ return;
+ }
+ //
+ aIC.Bounds (aT1, aT2, aP1, aP2);
+ aT=IntTools_Tools::IntermediatePoint(aT1, aT2);
+ aC3D=aIC.Curve();
+ aC3D->D0(aT, aP);
+ //
+ for (i=0; i<2; ++i) {
+ GeomAPI_ProjectPointOnSurf& aPPS=myContext->ProjPS(aF[i]);
+ aPPS.Perform(aP);
+ aPPS.LowerDistanceParameters(aU, aV);
+ BOPTools_Tools3D::GetNormalToSurface(aS[i], aU, aV, aDN[i]);
}
- return bFlag;
-}
-/*
-//=======================================================================
-// function: PrepareSetForFace
-// purpose:
-//=======================================================================
- void NMTTools_PaveFiller::PrepareSetForFace(const Standard_Integer nF1,
- const Standard_Integer nF2,
- BOPTools_PaveSet& aPSF)
-{
- Standard_Integer nV1, nV2;
- TColStd_MapOfInteger aMap;
- BOPTools_ListOfPaveBlock aLPB1, aLPB2;
- BOPTools_ListIteratorOfListOfPaveBlock anIt;
//
- RealSplitsFace(nF1, aLPB1);
- RealSplitsFace(nF2, aLPB2);
+ aA=aDN[0].Angle(aDN[1]);
+ aA=fabs(aA);
+ if (aA > 0.5*M_PI) {
+ aA = M_PI - aA;
+ }
//
- aLPB1.Append(aLPB2);
+ if (aA<aAmin || aA>aAmax) {
+ return;
+ }
//
- anIt.Initialize(aLPB1);
- for (; anIt.More(); anIt.Next()) {
- const BOPTools_PaveBlock& aPB=anIt.Value();
- const BOPTools_Pave& aPave1=aPB.Pave1();
- nV1=aPave1.Index();
- if (!aMap.Contains(nV1)) {
- aMap.Add(nV1);
- aPSF.Append(aPave1);
- }
- const BOPTools_Pave& aPave2=aPB.Pave2();
- nV2=aPave2.Index();
- if (!aMap.Contains(nV2)) {
- aMap.Add(nV2);
- aPSF.Append(aPave2);
+ aTolVmax=-1.;
+ aIt.Initialize(aMVStick);
+ for (; aIt.More(); aIt.Next()) {
+ nV=aIt.Key();
+ const TopoDS_Vertex& aV=*((TopoDS_Vertex*)(&myDS->Shape(nV)));
+ aTolV=BRep_Tool::Tolerance(aV);
+ if (aTolV>aTolVmax) {
+ aTolVmax=aTolV;
}
}
+ //
+
+ aTolR=aTolVmax/aA;
+ if (aTolR<aTolTresh) {
+ aTolR3D=aTolR;
+ }
}
-*/
-/*
+
+//modified by NIZNHY-PKV Wed Sep 14 13:21:13 2011f
+#if OCC_VERSION_LARGE > 0x06050100 // For OCCT6.5.2 and higher
//=======================================================================
-// function: IsExistingPaveBlock
-// purpose:
+// function: PutClosingPaveOnCurve
+// purpose:
//=======================================================================
- Standard_Boolean NMTTools_PaveFiller::IsExistingPaveBlock(const BOPTools_PaveBlock& aPBNew,
- const BOPTools_SSInterference& aFFi)
+void NMTTools_PaveFiller::PutClosingPaveOnCurve(BOPTools_Curve& aBC,
+ BOPTools_SSInterference& aFFi)
{
- Standard_Boolean bFlag;
- Standard_Real aTolR3D;
+ Standard_Boolean bIsClosed, bHasBounds, bAdded;
+ Standard_Integer nVC, j;
+ Standard_Real aT[2], aTolR3D, aTC, dT, aTx;
+ gp_Pnt aP[2] ;
+ BOPTools_Pave aPVx;
+ BOPTools_ListIteratorOfListOfPave aItLP;
//
+ const IntTools_Curve& aIC=aBC.Curve();
+ const Handle (Geom_Curve)& aC3D=aIC.Curve();
+ if(aC3D.IsNull()) {
+ return;
+ }
+ //
+ bIsClosed=IntTools_Tools::IsClosed(aC3D);
+ if (!bIsClosed) {
+ return;
+ }
+ //
+ bHasBounds=aIC.HasBounds ();
+ if (!bHasBounds){
+ return;
+ }
+ //
+ bAdded=Standard_False;
+ dT=Precision::PConfusion();
aTolR3D=aFFi.TolR3D();
- const BOPTools_ListOfPaveBlock& aLPBR=aFFi.PaveBlocks();
+ aIC.Bounds (aT[0], aT[1], aP[0], aP[1]);
//
- bFlag=IsExistingPaveBlock(aPBNew, aLPBR, aTolR3D);
+ BOPTools_PaveSet& aFFiPS=aFFi.NewPaveSet();
+ BOPTools_PaveSet& aCPS=aBC.Set();
//
- return bFlag;
+ const BOPTools_ListOfPave& aLP=aCPS.Set();
+ aItLP.Initialize(aLP);
+ for (; aItLP.More() && !bAdded; aItLP.Next()) {
+ const BOPTools_Pave& aPC=aItLP.Value();
+ nVC=aPC.Index();
+ const TopoDS_Vertex aVC=TopoDS::Vertex(myDS->Shape(nVC));
+ aTC=aPC.Param();
+ //
+ for (j=0; j<2; ++j) {
+ if (fabs(aTC-aT[j]) < dT) {
+ aTx=(!j) ? aT[1] : aT[0];
+ aPVx.SetIndex(nVC);
+ aPVx.SetParam(aTx);
+ //
+ aCPS.Append(aPVx);
+ aFFiPS.Append(aPVx);
+ //
+ bAdded=Standard_True;
+ break;
+ }
+ }
+ }
}
-*/
+#endif // OCC_VERSION_LARGE > 0x06050100 // For OCCT6.5.2 and higher
+//modified by NIZNHY-PKV Wed Sep 14 13:21:17 2011t