-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#else
extern int OCCGenerateMesh (OCCGeometry&, Mesh*&, int, int, char*);
#endif
+ NETGENPLUGIN_DLL_HEADER
extern MeshingParameters mparam;
+ extern void OCCSetLocalMeshSize(OCCGeometry & geom, Mesh & mesh);
}
using namespace std;
using namespace netgen;
using namespace nglib;
-//#define DUMP_SEGMENTS
-
//=============================================================================
/*!
*
*/
//=============================================================================
-NETGENPlugin_NETGEN_2D_ONLY::NETGENPlugin_NETGEN_2D_ONLY(int hypId, int studyId,
+NETGENPlugin_NETGEN_2D_ONLY::NETGENPlugin_NETGEN_2D_ONLY(int hypId,
SMESH_Gen* gen)
- : SMESH_2D_Algo(hypId, studyId, gen)
+ : SMESH_2D_Algo(hypId, gen)
{
- MESSAGE("NETGENPlugin_NETGEN_2D_ONLY::NETGENPlugin_NETGEN_2D_ONLY");
_name = "NETGEN_2D_ONLY";
_shapeType = (1 << TopAbs_FACE);// 1 bit /shape type
+ _onlyUnaryInput = false; // treat all FACEs at once
_compatibleHypothesis.push_back("MaxElementArea");
_compatibleHypothesis.push_back("LengthFromEdges");
_compatibleHypothesis.push_back("NETGEN_Parameters_2D");
_compatibleHypothesis.push_back("ViscousLayers2D");
- _hypMaxElementArea = 0;
- _hypLengthFromEdges = 0;
+ _hypMaxElementArea = 0;
+ _hypLengthFromEdges = 0;
_hypQuadranglePreference = 0;
- _hypParameters = 0;
+ _hypParameters = 0;
}
//=============================================================================
NETGENPlugin_NETGEN_2D_ONLY::~NETGENPlugin_NETGEN_2D_ONLY()
{
- MESSAGE("NETGENPlugin_NETGEN_2D_ONLY::~NETGENPlugin_NETGEN_2D_ONLY");
+ //MESSAGE("NETGENPlugin_NETGEN_2D_ONLY::~NETGENPlugin_NETGEN_2D_ONLY");
}
//=============================================================================
_hypMaxElementArea = 0;
_hypLengthFromEdges = 0;
_hypQuadranglePreference = 0;
+ _hypParameters = 0;
+ _progressByTic = -1;
const list<const SMESHDS_Hypothesis*>& hyps = GetUsedHypothesis(aMesh, aShape, false);
aStatus = HYP_MISSING;
+ bool hasVL = false;
list<const SMESHDS_Hypothesis*>::const_iterator ith;
for (ith = hyps.begin(); ith != hyps.end(); ++ith )
{
else if ( hypName == "NETGEN_Parameters_2D" )
_hypParameters = static_cast<const NETGENPlugin_Hypothesis_2D*>(hyp);
else if ( hypName == StdMeshers_ViscousLayers2D::GetHypType() )
- continue;
+ hasVL = true;
else {
aStatus = HYP_INCOMPATIBLE;
return false;
int nbHyps = bool(_hypMaxElementArea) + bool(_hypLengthFromEdges) + bool(_hypParameters );
if ( nbHyps > 1 )
- aStatus = HYP_CONCURENT;
+ aStatus = HYP_CONCURRENT;
+ else if ( hasVL )
+ error( StdMeshers_ViscousLayers2D::CheckHypothesis( aMesh, aShape, aStatus ));
else
aStatus = HYP_OK;
+ if ( aStatus == HYP_OK && _hypParameters && _hypQuadranglePreference )
+ {
+ aStatus = HYP_INCOMPAT_HYPS;
+ return error(SMESH_Comment("\"") << _hypQuadranglePreference->GetName()
+ << "\" and \"" << _hypParameters->GetName()
+ << "\" are incompatible hypotheses");
+ }
+
return ( aStatus == HYP_OK );
}
+// namespace
+// {
+// void limitSize( netgen::Mesh* ngMesh,
+// const double maxh )
+// {
+// // get bnd box
+// netgen::Point3d pmin, pmax;
+// ngMesh->GetBox( pmin, pmax, 0 );
+// const double dx = pmax.X() - pmin.X();
+// const double dy = pmax.Y() - pmin.Y();
+// const double dz = pmax.Z() - pmin.Z();
+
+// const int nbX = Max( 2, int( dx / maxh * 3 ));
+// const int nbY = Max( 2, int( dy / maxh * 3 ));
+// const int nbZ = Max( 2, int( dz / maxh * 3 ));
+
+// if ( ! & ngMesh->LocalHFunction() )
+// ngMesh->SetLocalH( pmin, pmax, 0.1 );
+
+// netgen::Point3d p;
+// for ( int i = 0; i <= nbX; ++i )
+// {
+// p.X() = pmin.X() + i * dx / nbX;
+// for ( int j = 0; j <= nbY; ++j )
+// {
+// p.Y() = pmin.Y() + j * dy / nbY;
+// for ( int k = 0; k <= nbZ; ++k )
+// {
+// p.Z() = pmin.Z() + k * dz / nbZ;
+// ngMesh->RestrictLocalH( p, maxh );
+// }
+// }
+// }
+// }
+// }
+
//=============================================================================
/*!
*Here we are going to use the NETGEN mesher
bool NETGENPlugin_NETGEN_2D_ONLY::Compute(SMESH_Mesh& aMesh,
const TopoDS_Shape& aShape)
{
-#ifdef WITH_SMESH_CANCEL_COMPUTE
netgen::multithread.terminate = 0;
-#endif
- MESSAGE("NETGENPlugin_NETGEN_2D_ONLY::Compute()");
+ //netgen::multithread.task = "Surface meshing";
SMESHDS_Mesh* meshDS = aMesh.GetMeshDS();
- int faceID = meshDS->ShapeToIndex( aShape );
-
SMESH_MesherHelper helper(aMesh);
- _quadraticMesh = helper.IsQuadraticSubMesh(aShape);
helper.SetElementsOnShape( true );
- const bool ignoreMediumNodes = _quadraticMesh;
-
- // build viscous layers if required
- const TopoDS_Face F = TopoDS::Face( aShape/*.Oriented( TopAbs_FORWARD )*/);
- SMESH_ProxyMesh::Ptr proxyMesh = StdMeshers_ViscousLayers2D::Compute( aMesh, F );
- if ( !proxyMesh )
- return false;
- // ------------------------
- // get all edges of a face
- // ------------------------
- TError problem;
- TSideVector wires =
- StdMeshers_FaceSide::GetFaceWires( F, aMesh, ignoreMediumNodes, problem, proxyMesh );
- if ( problem && !problem->IsOK() )
- return error( problem );
- int nbWires = wires.size();
- if ( nbWires == 0 )
- return error( "Problem in StdMeshers_FaceSide::GetFaceWires()");
- if ( wires[0]->NbSegments() < 3 ) // ex: a circle with 2 segments
- return error(COMPERR_BAD_INPUT_MESH,
- SMESH_Comment("Too few segments: ")<<wires[0]->NbSegments());
-
- // --------------------
- // compute edge length
- // --------------------
+ NETGENPlugin_NetgenLibWrapper ngLib;
+ ngLib._isComputeOk = false;
+
+ netgen::Mesh ngMeshNoLocSize;
+ netgen::Mesh * ngMeshes[2] = { (netgen::Mesh*) ngLib._ngMesh, & ngMeshNoLocSize };
+ netgen::OCCGeometry occgeoComm;
+
+ // min / max sizes are set as follows:
+ // if ( _hypParameters )
+ // min and max are defined by the user
+ // else if ( _hypLengthFromEdges )
+ // min = aMesher.GetDefaultMinSize()
+ // max = average segment len of a FACE
+ // else if ( _hypMaxElementArea )
+ // min = aMesher.GetDefaultMinSize()
+ // max = f( _hypMaxElementArea )
+ // else
+ // min = aMesher.GetDefaultMinSize()
+ // max = max segment len of a FACE
NETGENPlugin_Mesher aMesher( &aMesh, aShape, /*isVolume=*/false);
- netgen::OCCGeometry occgeo;
- aMesher.PrepareOCCgeometry( occgeo, F, aMesh );
- occgeo.fmap.Clear(); // face can be reversed, which is wrong in this case (issue 19978)
- occgeo.fmap.Add( F );
-
- if ( _hypParameters )
+ aMesher.SetParameters( _hypParameters ); // _hypParameters -> netgen::mparam
+ const bool toOptimize = _hypParameters ? _hypParameters->GetOptimize() : true;
+ if ( _hypMaxElementArea )
{
- aMesher.SetParameters(_hypParameters);
+ netgen::mparam.maxh = sqrt( 2. * _hypMaxElementArea->GetMaxArea() / sqrt(3.0) );
}
- else
+ if ( _hypQuadranglePreference )
+ netgen::mparam.quad = true;
+
+ // local size is common for all FACEs in aShape?
+ const bool isCommonLocalSize = ( !_hypLengthFromEdges && !_hypMaxElementArea && netgen::mparam.uselocalh );
+ const bool isDefaultHyp = ( !_hypLengthFromEdges && !_hypMaxElementArea && !_hypParameters );
+
+ if ( isCommonLocalSize ) // compute common local size in ngMeshes[0]
{
- double edgeLength = 0;
- if (_hypLengthFromEdges || (!_hypLengthFromEdges && !_hypMaxElementArea))
+ //list< SMESH_subMesh* > meshedSM[4]; --> all sub-shapes are added to occgeoComm
+ aMesher.PrepareOCCgeometry( occgeoComm, aShape, aMesh );//, meshedSM );
+
+ // local size set at MESHCONST_ANALYSE step depends on
+ // minh, face_maxh, grading and curvaturesafety; find minh if not set by the user
+ if ( !_hypParameters || netgen::mparam.minh < DBL_MIN )
+ {
+ if ( !_hypParameters )
+ netgen::mparam.maxh = occgeoComm.GetBoundingBox().Diam() / 3.;
+ netgen::mparam.minh = aMesher.GetDefaultMinSize( aShape, netgen::mparam.maxh );
+ }
+ // set local size depending on curvature and NOT closeness of EDGEs
+ netgen::occparam.resthcloseedgeenable = false;
+ //netgen::occparam.resthcloseedgefac = 1.0 + netgen::mparam.grading;
+ occgeoComm.face_maxh = netgen::mparam.maxh;
+ netgen::OCCSetLocalMeshSize( occgeoComm, *ngMeshes[0] );
+ occgeoComm.emap.Clear();
+ occgeoComm.vmap.Clear();
+
+ // set local size according to size of existing segments
+ const double factor = netgen::occparam.resthcloseedgefac;
+ TopTools_IndexedMapOfShape edgeMap;
+ TopExp::MapShapes( aMesh.GetShapeToMesh(), TopAbs_EDGE, edgeMap );
+ for ( int iE = 1; iE <= edgeMap.Extent(); ++iE )
{
- int nbSegments = 0;
- for ( int iW = 0; iW < nbWires; ++iW )
+ const TopoDS_Shape& edge = edgeMap( iE );
+ if ( SMESH_Algo::isDegenerated( TopoDS::Edge( edge )))
+ continue;
+ SMESHDS_SubMesh* smDS = meshDS->MeshElements( edge );
+ if ( !smDS ) continue;
+ SMDS_ElemIteratorPtr segIt = smDS->GetElements();
+ while ( segIt->more() )
{
- edgeLength += wires[ iW ]->Length();
- nbSegments += wires[ iW ]->NbSegments();
+ const SMDS_MeshElement* seg = segIt->next();
+ SMESH_TNodeXYZ n1 = seg->GetNode(0);
+ SMESH_TNodeXYZ n2 = seg->GetNode(1);
+ gp_XYZ p = 0.5 * ( n1 + n2 );
+ netgen::Point3d pi(p.X(), p.Y(), p.Z());
+ ngMeshes[0]->RestrictLocalH( pi, factor * ( n1 - n2 ).Modulus() );
}
- if ( nbSegments )
- edgeLength /= nbSegments;
}
- if ( _hypMaxElementArea )
+
+ // set local size defined on shapes
+ aMesher.SetLocalSize( occgeoComm, *ngMeshes[0] );
+ aMesher.SetLocalSizeForChordalError( occgeoComm, *ngMeshes[0] );
+ try {
+ ngMeshes[0]->LoadLocalMeshSize( mparam.meshsizefilename );
+ } catch (NgException & ex) {
+ return error( COMPERR_BAD_PARMETERS, ex.What() );
+ }
+ }
+ netgen::mparam.uselocalh = toOptimize; // restore as it is used at surface optimization
+
+ // ==================
+ // Loop on all FACEs
+ // ==================
+
+ vector< const SMDS_MeshNode* > nodeVec;
+
+ TopExp_Explorer fExp( aShape, TopAbs_FACE );
+ for ( int iF = 0; fExp.More(); fExp.Next(), ++iF )
+ {
+ TopoDS_Face F = TopoDS::Face( fExp.Current() /*.Oriented( TopAbs_FORWARD )*/);
+ int faceID = meshDS->ShapeToIndex( F );
+ SMESH_ComputeErrorPtr& faceErr = aMesh.GetSubMesh( F )->GetComputeError();
+
+ _quadraticMesh = helper.IsQuadraticSubMesh( F );
+ const bool ignoreMediumNodes = _quadraticMesh;
+
+ // build viscous layers if required
+ if ( F.Orientation() != TopAbs_FORWARD &&
+ F.Orientation() != TopAbs_REVERSED )
+ F.Orientation( TopAbs_FORWARD ); // avoid pb with TopAbs_INTERNAL
+ SMESH_ProxyMesh::Ptr proxyMesh = StdMeshers_ViscousLayers2D::Compute( aMesh, F );
+ if ( !proxyMesh )
+ continue;
+
+ // ------------------------
+ // get all EDGEs of a FACE
+ // ------------------------
+ TSideVector wires =
+ StdMeshers_FaceSide::GetFaceWires( F, aMesh, ignoreMediumNodes, faceErr, &helper, proxyMesh );
+ if ( faceErr && !faceErr->IsOK() )
+ continue;
+ int nbWires = wires.size();
+ if ( nbWires == 0 )
{
- double maxArea = _hypMaxElementArea->GetMaxArea();
- edgeLength = sqrt(2. * maxArea/sqrt(3.0));
+ faceErr.reset
+ ( new SMESH_ComputeError
+ ( COMPERR_ALGO_FAILED, "Problem in StdMeshers_FaceSide::GetFaceWires()" ));
+ continue;
+ }
+ if ( wires[0]->NbSegments() < 3 ) // ex: a circle with 2 segments
+ {
+ faceErr.reset
+ ( new SMESH_ComputeError
+ ( COMPERR_BAD_INPUT_MESH, SMESH_Comment("Too few segments: ")<<wires[0]->NbSegments()) );
+ continue;
}
- if ( edgeLength < DBL_MIN )
- edgeLength = occgeo.GetBoundingBox().Diam();
- netgen::mparam.maxh = edgeLength;
- netgen::mparam.minh = aMesher.GetDefaultMinSize( aShape, netgen::mparam.maxh );
- netgen::mparam.quad = _hypQuadranglePreference ? 1 : 0;
- netgen::mparam.grading = 0.7; // very coarse mesh by default
- }
- occgeo.face_maxh = netgen::mparam.maxh;
+ // ----------------------
+ // compute maxh of a FACE
+ // ----------------------
- // -------------------------
- // Make input netgen mesh
- // -------------------------
+ if ( !_hypParameters )
+ {
+ double edgeLength = 0;
+ if (_hypLengthFromEdges )
+ {
+ // compute edgeLength as an average segment length
+ int nbSegments = 0;
+ for ( int iW = 0; iW < nbWires; ++iW )
+ {
+ edgeLength += wires[ iW ]->Length();
+ nbSegments += wires[ iW ]->NbSegments();
+ }
+ if ( nbSegments )
+ edgeLength /= nbSegments;
+ netgen::mparam.maxh = edgeLength;
+ }
+ else if ( isDefaultHyp )
+ {
+ // set edgeLength by a longest segment
+ double maxSeg2 = 0;
+ for ( int iW = 0; iW < nbWires; ++iW )
+ {
+ const UVPtStructVec& points = wires[ iW ]->GetUVPtStruct();
+ if ( points.empty() )
+ return error( COMPERR_BAD_INPUT_MESH );
+ gp_Pnt pPrev = SMESH_TNodeXYZ( points[0].node );
+ for ( size_t i = 1; i < points.size(); ++i )
+ {
+ gp_Pnt p = SMESH_TNodeXYZ( points[i].node );
+ maxSeg2 = Max( maxSeg2, p.SquareDistance( pPrev ));
+ pPrev = p;
+ }
+ }
+ edgeLength = sqrt( maxSeg2 ) * 1.05;
+ netgen::mparam.maxh = edgeLength;
+ }
+ if ( netgen::mparam.maxh < DBL_MIN )
+ netgen::mparam.maxh = occgeoComm.GetBoundingBox().Diam();
- NETGENPlugin_NetgenLibWrapper ngLib;
- netgen::Mesh * ngMesh = (netgen::Mesh*) ngLib._ngMesh;
+ if ( !isCommonLocalSize )
+ {
+ netgen::mparam.minh = aMesher.GetDefaultMinSize( F, netgen::mparam.maxh );
+ }
+ }
+
+ // prepare occgeom
+ netgen::OCCGeometry occgeom;
+ occgeom.shape = F;
+ occgeom.fmap.Add( F );
+ occgeom.CalcBoundingBox();
+ occgeom.facemeshstatus.SetSize(1);
+ occgeom.facemeshstatus = 0;
+ occgeom.face_maxh_modified.SetSize(1);
+ occgeom.face_maxh_modified = 0;
+ occgeom.face_maxh.SetSize(1);
+ occgeom.face_maxh = netgen::mparam.maxh;
+
+ // -------------------------
+ // Fill netgen mesh
+ // -------------------------
+
+ // MESHCONST_ANALYSE step may lead to a failure, so we make an attempt
+ // w/o MESHCONST_ANALYSE at the second loop
+ int err = 0;
+ enum { LOC_SIZE, NO_LOC_SIZE };
+ int iLoop = isCommonLocalSize ? 0 : 1;
+ for ( ; iLoop < 2; iLoop++ )
+ {
+ //bool isMESHCONST_ANALYSE = false;
+ InitComputeError();
- Box<3> bb = occgeo.GetBoundingBox();
- bb.Increase (bb.Diam()/10);
- ngMesh->SetLocalH (bb.PMin(), bb.PMax(), netgen::mparam.grading);
- ngMesh->SetGlobalH (netgen::mparam.maxh);
+ netgen::Mesh * ngMesh = ngMeshes[ iLoop ];
+ ngMesh->DeleteMesh();
- vector< const SMDS_MeshNode* > nodeVec;
- problem = aMesher.AddSegmentsToMesh( *ngMesh, occgeo, wires, helper, nodeVec );
- if ( problem && !problem->IsOK() )
- return error( problem );
+ if ( iLoop == NO_LOC_SIZE )
+ {
+ ngMesh->SetGlobalH ( mparam.maxh );
+ ngMesh->SetMinimalH( mparam.minh );
+ Box<3> bb = occgeom.GetBoundingBox();
+ bb.Increase (bb.Diam()/10);
+ ngMesh->SetLocalH (bb.PMin(), bb.PMax(), mparam.grading);
+ aMesher.SetLocalSize( occgeom, *ngMesh );
+ aMesher.SetLocalSizeForChordalError( occgeoComm, *ngMesh );
+ try {
+ ngMesh->LoadLocalMeshSize( mparam.meshsizefilename );
+ } catch (NgException & ex) {
+ return error( COMPERR_BAD_PARMETERS, ex.What() );
+ }
+ }
- // -------------------------
- // Generate surface mesh
- // -------------------------
+ nodeVec.clear();
+ faceErr = aMesher.AddSegmentsToMesh( *ngMesh, occgeom, wires, helper, nodeVec,
+ /*overrideMinH=*/!_hypParameters);
+ if ( faceErr && !faceErr->IsOK() )
+ break;
-#ifndef NETGEN_V5
- char *optstr = 0;
-#endif
- int startWith = MESHCONST_MESHSURFACE;
- int endWith = MESHCONST_OPTSURFACE;
- int err = 1;
+ //if ( !isCommonLocalSize )
+ //limitSize( ngMesh, mparam.maxh * 0.8);
+
+ // -------------------------
+ // Generate surface mesh
+ // -------------------------
+
+ const int startWith = MESHCONST_MESHSURFACE;
+ const int endWith = toOptimize ? MESHCONST_OPTSURFACE : MESHCONST_MESHSURFACE;
+
+ SMESH_Comment str;
+ try {
+ OCC_CATCH_SIGNALS;
- try {
-#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
- OCC_CATCH_SIGNALS;
-#endif
#ifdef NETGEN_V5
- err = netgen::OCCGenerateMesh(occgeo, ngMesh, netgen::mparam, startWith, endWith);
+ err = netgen::OCCGenerateMesh(occgeom, ngMesh, netgen::mparam, startWith, endWith);
#else
- err = netgen::OCCGenerateMesh(occgeo, ngMesh, startWith, endWith, optstr);
-#endif
-#ifdef WITH_SMESH_CANCEL_COMPUTE
- if(netgen::multithread.terminate)
- return false;
+ char *optstr = 0;
+ err = netgen::OCCGenerateMesh(occgeom, ngMesh, startWith, endWith, optstr);
#endif
- if ( err )
- error(SMESH_Comment("Error in netgen::OCCGenerateMesh() at ") << netgen::multithread.task);
- }
- catch (Standard_Failure& ex)
- {
- SMESH_Comment str("Exception in netgen::OCCGenerateMesh()");
- str << " at " << netgen::multithread.task
- << ": " << ex.DynamicType()->Name();
- if ( ex.GetMessageString() && strlen( ex.GetMessageString() ))
- str << ": " << ex.GetMessageString();
- error(str);
- }
- catch (...) {
- SMESH_Comment str("Exception in netgen::OCCGenerateMesh()");
- str << " at " << netgen::multithread.task;
- error(str);
- }
+ if ( netgen::multithread.terminate )
+ return false;
+ if ( err )
+ str << "Error in netgen::OCCGenerateMesh() at " << netgen::multithread.task;
+ }
+ catch (Standard_Failure& ex)
+ {
+ err = 1;
+ str << "Exception in netgen::OCCGenerateMesh()"
+ << " at " << netgen::multithread.task
+ << ": " << ex.DynamicType()->Name();
+ if ( ex.GetMessageString() && strlen( ex.GetMessageString() ))
+ str << ": " << ex.GetMessageString();
+ }
+ catch (...) {
+ err = 1;
+ str << "Exception in netgen::OCCGenerateMesh()"
+ << " at " << netgen::multithread.task;
+ }
+ if ( err )
+ {
+ if ( aMesher.FixFaceMesh( occgeom, *ngMesh, 1 ))
+ break;
+ if ( iLoop == LOC_SIZE )
+ {
+ netgen::mparam.minh = netgen::mparam.maxh;
+ netgen::mparam.maxh = 0;
+ for ( size_t iW = 0; iW < wires.size(); ++iW )
+ {
+ StdMeshers_FaceSidePtr wire = wires[ iW ];
+ const vector<UVPtStruct>& uvPtVec = wire->GetUVPtStruct();
+ for ( size_t iP = 1; iP < uvPtVec.size(); ++iP )
+ {
+ SMESH_TNodeXYZ p( uvPtVec[ iP ].node );
+ netgen::Point3d np( p.X(),p.Y(),p.Z());
+ double segLen = p.Distance( uvPtVec[ iP-1 ].node );
+ double size = ngMesh->GetH( np );
+ netgen::mparam.minh = Min( netgen::mparam.minh, size );
+ netgen::mparam.maxh = Max( netgen::mparam.maxh, segLen );
+ }
+ }
+ //cerr << "min " << netgen::mparam.minh << " max " << netgen::mparam.maxh << endl;
+ netgen::mparam.minh *= 0.9;
+ netgen::mparam.maxh *= 1.1;
+ continue;
+ }
+ else
+ {
+ faceErr.reset( new SMESH_ComputeError( COMPERR_ALGO_FAILED, str ));
+ }
+ }
- // ----------------------------------------------------
- // Fill the SMESHDS with the generated nodes and faces
- // ----------------------------------------------------
- int nbNodes = ngMesh->GetNP();
- int nbFaces = ngMesh->GetNSE();
+ // ----------------------------------------------------
+ // Fill the SMESHDS with the generated nodes and faces
+ // ----------------------------------------------------
- int nbInputNodes = nodeVec.size()-1;
- nodeVec.resize( nbNodes+1, 0 );
+ int nbNodes = ngMesh->GetNP();
+ int nbFaces = ngMesh->GetNSE();
- // add nodes
- for ( int ngID = nbInputNodes + 1; ngID <= nbNodes; ++ngID )
- {
- const MeshPoint& ngPoint = ngMesh->Point( ngID );
- SMDS_MeshNode * node = meshDS->AddNode(ngPoint(0), ngPoint(1), ngPoint(2));
- nodeVec[ ngID ] = node;
- }
+ int nbInputNodes = nodeVec.size()-1;
+ nodeVec.resize( nbNodes+1, 0 );
- // create faces
- const bool reverse = false; //( aShape.Orientation() == TopAbs_REVERSED );
- int i,j;
- for ( i = 1; i <= nbFaces ; ++i )
- {
- const Element2d& elem = ngMesh->SurfaceElement(i);
- vector<const SMDS_MeshNode*> nodes( elem.GetNP() );
- for (j=1; j <= elem.GetNP(); ++j)
- {
- int pind = elem.PNum(j);
- if ( pind < 1 )
- break;
- const SMDS_MeshNode* node = nodeVec[ pind ];
- if ( reverse )
- nodes[ nodes.size()-j ] = node;
- else
- nodes[ j-1 ] = node;
- if ( node->GetPosition()->GetTypeOfPosition() == SMDS_TOP_3DSPACE )
+ // add nodes
+ for ( int ngID = nbInputNodes + 1; ngID <= nbNodes; ++ngID )
{
- const PointGeomInfo& pgi = elem.GeomInfoPi(j);
- meshDS->SetNodeOnFace((SMDS_MeshNode*)node, faceID, pgi.u, pgi.v);
+ const MeshPoint& ngPoint = ngMesh->Point( ngID );
+ SMDS_MeshNode * node = meshDS->AddNode(ngPoint(0), ngPoint(1), ngPoint(2));
+ nodeVec[ ngID ] = node;
}
- }
- if ( j > elem.GetNP() )
- {
- SMDS_MeshFace* face = 0;
- if ( elem.GetType() == TRIG )
- face = helper.AddFace(nodes[0],nodes[1],nodes[2]);
- else
- face = helper.AddFace(nodes[0],nodes[1],nodes[2],nodes[3]);
- }
- }
- return !err;
+ // create faces
+ int i,j;
+ vector<const SMDS_MeshNode*> nodes;
+ for ( i = 1; i <= nbFaces ; ++i )
+ {
+ const Element2d& elem = ngMesh->SurfaceElement(i);
+ nodes.resize( elem.GetNP() );
+ for (j=1; j <= elem.GetNP(); ++j)
+ {
+ int pind = elem.PNum(j);
+ if ( pind < 1 )
+ break;
+ nodes[ j-1 ] = nodeVec[ pind ];
+ if ( nodes[ j-1 ]->GetPosition()->GetTypeOfPosition() == SMDS_TOP_3DSPACE )
+ {
+ const PointGeomInfo& pgi = elem.GeomInfoPi(j);
+ meshDS->SetNodeOnFace( nodes[ j-1 ], faceID, pgi.u, pgi.v);
+ }
+ }
+ if ( j > elem.GetNP() )
+ {
+ if ( elem.GetType() == TRIG )
+ helper.AddFace(nodes[0],nodes[1],nodes[2]);
+ else
+ helper.AddFace(nodes[0],nodes[1],nodes[2],nodes[3]);
+ }
+ }
+
+ break;
+ } // two attempts
+ } // loop on FACEs
+
+ return true;
}
-#ifdef WITH_SMESH_CANCEL_COMPUTE
void NETGENPlugin_NETGEN_2D_ONLY::CancelCompute()
{
SMESH_Algo::CancelCompute();
netgen::multithread.terminate = 1;
}
-#endif
+
+//================================================================================
+/*!
+ * \brief Return progress of Compute() [0.,1]
+ */
+//================================================================================
+
+double NETGENPlugin_NETGEN_2D_ONLY::GetProgress() const
+{
+ return -1;
+ // const char* task1 = "Surface meshing";
+ // //const char* task2 = "Optimizing surface";
+ // double& progress = const_cast<NETGENPlugin_NETGEN_2D_ONLY*>( this )->_progress;
+ // if ( _progressByTic < 0. &&
+ // strncmp( netgen::multithread.task, task1, 3 ) == 0 )
+ // {
+ // progress = Min( 0.25, SMESH_Algo::GetProgressByTic() ); // [0, 0.25]
+ // }
+ // else //if ( strncmp( netgen::multithread.task, task2, 3 ) == 0)
+ // {
+ // if ( _progressByTic < 0 )
+ // {
+ // NETGENPlugin_NETGEN_2D_ONLY* me = (NETGENPlugin_NETGEN_2D_ONLY*) this;
+ // me->_progressByTic = 0.25 / (_progressTic+1);
+ // }
+ // const_cast<NETGENPlugin_NETGEN_2D_ONLY*>( this )->_progressTic++;
+ // progress = Max( progress, _progressByTic * _progressTic );
+ // }
+ // //cout << netgen::multithread.task << " " << _progressTic << endl;
+ // return Min( progress, 0.99 );
+}
//=============================================================================
/*!
// compute edge length
double ELen = 0;
- if (_hypLengthFromEdges || !_hypLengthFromEdges && !_hypMaxElementArea) {
+ if (( _hypLengthFromEdges ) || ( !_hypLengthFromEdges && !_hypMaxElementArea )) {
if ( nb1d > 0 )
ELen = fullLen / nb1d;
}