-## Copyright (C) 2018-20xx CEA/DEN, EDF R&D
+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
##
## This library is free software; you can redistribute it and/or
## modify it under the terms of the GNU Lesser General Public
## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
##
+# -*- coding: utf-8 -*-
+
from SketchAPI import *
from salome.shaper import model
SketchLine_7.setAuxiliary(True)
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchLine_7.startPoint())
SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_7.endPoint())
-SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_7.result(), SketchLine_3.result(), 93.56999999999999)
+SketchConstraintAngle_1 = Sketch_1.setAngle(SketchLine_7.result(), SketchLine_3.result(), 93.56999999998719)
SketchArc_2 = Sketch_1.addArc(2.349985665002739, 1.087256027998574, 2.499428733897898, 3.48259875277915, 3.77688682869805, 3.017010693505298, True)
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_1.endPoint(), SketchArc_2.startPoint())
SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_2.results()[1])
SketchLine_8.result().setName("SketchLine_9")
SketchLine_8.setAuxiliary(True)
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchArc_2.endPoint(), SketchLine_8.endPoint())
-SketchConstraintAngle_2 = Sketch_1.setAngle(SketchLine_8.result(), SketchLine_7.result(), 32.91)
+SketchConstraintAngle_2 = Sketch_1.setAngle(SketchLine_8.result(), SketchLine_7.result(), 32.91000000001281)
SketchConstraintCoincidence_12 = Sketch_1.setCoincident(SketchLine_8.startPoint(), SketchArc_2.center())
SketchLine_9 = Sketch_1.addLine(1.546759218272496, 0.000964964207000808, 4.166514953924199, 2.685528408329715)
SketchLine_9.setName("SketchLine_10")
SketchLine_9.result().setName("SketchLine_10")
SketchLine_9.setAuxiliary(True)
SketchConstraintCoincidence_13 = Sketch_1.setCoincident(SketchArc_3.endPoint(), SketchLine_9.endPoint())
-SketchConstraintAngle_3 = Sketch_1.setAngle(SketchLine_9.result(), SketchLine_8.result(), 7.82)
+SketchConstraintAngle_3 = Sketch_1.setAngle(SketchLine_9.result(), SketchLine_8.result(), 7.820000000000003)
SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_9.startPoint(), SketchArc_3.center())
SketchLine_10 = Sketch_1.addLine(4.166514953924199, 2.685528408329715, 4.411514953924289, 2.446442922550623)
SketchLine_10.setName("SketchLine_11")
SketchLine_12.setAuxiliary(True)
SketchConstraintCoincidence_19 = Sketch_1.setCoincident(SketchArc_4.center(), SketchLine_12.startPoint())
SketchConstraintCoincidence_20 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_12.endPoint())
-SketchConstraintAngle_4 = Sketch_1.setAngleBackward(SketchLine_11.result(), SketchLine_12.result(), 8.018000000000001)
+SketchConstraintAngle_4 = Sketch_1.setAngleBackward(SketchLine_11.result(), SketchLine_12.result(), 8.018000000993595)
SketchConstraintRadius_4 = Sketch_1.setRadius(SketchArc_4.results()[1], 1.32)
SketchArc_5 = Sketch_1.addArc(1.545335047953034, 0, 4.534275383417573, 2.308616054576027, 3.791202568545627, -3.03637143583555, True)
SketchConstraintCoincidence_21 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchArc_5.startPoint())
SketchArc_11.setName("SketchArc_14")
SketchArc_11.result().setName("SketchArc_14")
SketchArc_11.results()[1].setName("SketchArc_14_2")
+SketchArc_10.setName("SketchArc_10")
+SketchArc_10.result().setName("SketchArc_10")
+SketchArc_10.results()[1].setName("SketchArc_10_2")
+SketchArc_9.setName("SketchArc_9")
+SketchArc_9.result().setName("SketchArc_9")
+SketchArc_9.results()[1].setName("SketchArc_9_2")
+SketchLine_16.setName("SketchLine_16")
+SketchLine_16.result().setName("SketchLine_16")
+SketchLine_15.setName("SketchLine_15")
+SketchLine_15.result().setName("SketchLine_15")
+SketchLine_14.setName("SketchLine_14")
+SketchLine_14.result().setName("SketchLine_14")
SketchConstraintCoincidence_30 = Sketch_1.setCoincident(SketchArc_7.endPoint(), SketchArc_8.startPoint())
SketchConstraintTangent_9 = Sketch_1.setTangent(SketchArc_7.results()[1], SketchArc_8.results()[1])
SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchLine_5.result(), SketchArc_8.endPoint())
SketchArc_15.result().setName("SketchArc_18")
SketchArc_15.results()[1].setName("SketchArc_18_2")
SketchConstraintCoincidence_42 = Sketch_1.setCoincident(SketchArc_14.endPoint(), SketchArc_15.startPoint())
-SketchConstraintTangent_12 = Sketch_1.setTangent(SketchArc_14.results()[1], SketchArc_15.results()[1])
+SketchConstraintTangent_11 = Sketch_1.setTangent(SketchArc_14.results()[1], SketchArc_15.results()[1])
SketchArc_16 = Sketch_1.addArc(1.552616124088898, 0, 3.904833906055851, 3.190047534283911, 5.51611606287941, 0, True)
SketchArc_16.setName("SketchArc_19")
SketchArc_16.result().setName("SketchArc_19")
SketchArc_16.results()[1].setName("SketchArc_19_2")
SketchConstraintCoincidence_43 = Sketch_1.setCoincident(SketchArc_15.endPoint(), SketchArc_16.startPoint())
-SketchConstraintTangent_13 = Sketch_1.setTangent(SketchArc_15.results()[1], SketchArc_16.results()[1])
+SketchConstraintTangent_12 = Sketch_1.setTangent(SketchArc_15.results()[1], SketchArc_16.results()[1])
SketchConstraintCoincidence_44 = Sketch_1.setCoincident(SketchLine_5.result(), SketchArc_16.endPoint())
SketchConstraintCoincidence_45 = Sketch_1.setCoincident(SketchArc_14.endPoint(), SketchLine_13.result())
SketchConstraintCoincidence_46 = Sketch_1.setCoincident(SketchArc_14.center(), SketchArc_6.center())
SketchConstraintCoincidence_51 = Sketch_1.setCoincident(SketchLine_21.endPoint(), SketchLine_3.result())
SketchConstraintVertical_5 = Sketch_1.setVertical(SketchLine_20.result())
SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_21.endPoint(), SketchLine_20.result(), 0.03, True)
-SketchConstraintAngle_5 = Sketch_1.setAngle(SketchLine_20.result(), SketchLine_21.result(), 170)
+SketchConstraintAngle_5 = Sketch_1.setAngle(SketchLine_20.result(), SketchLine_21.result(), 169.9999999984344)
SketchConstraintDistance_7 = Sketch_1.setDistance(SketchLine_21.endPoint(), SketchLine_19.result(), 0.045, True)
SketchArc_17 = Sketch_1.addArc(2.429999974807022, 2.369762445224826, 1.08, 2.370000000000011, 2.429999974807022, 3.719762440932702, True)
SketchArc_17.setName("SketchArc_23")
SketchArc_23.results()[1].setName("SketchArc_26_2")
SketchLine_23.setName("SketchLine_24")
SketchLine_23.result().setName("SketchLine_24")
+SketchArc_22.setName("SketchArc_22")
+SketchArc_22.result().setName("SketchArc_22")
+SketchArc_22.results()[1].setName("SketchArc_22_2")
+SketchArc_21.setName("SketchArc_21")
+SketchArc_21.result().setName("SketchArc_21")
+SketchArc_21.results()[1].setName("SketchArc_21_2")
+SketchArc_20.setName("SketchArc_20")
+SketchArc_20.result().setName("SketchArc_20")
+SketchArc_20.results()[1].setName("SketchArc_20_2")
SketchLine_22.setName("SketchLine_21")
SketchLine_22.result().setName("SketchLine_21")
SketchConstraintCoincidence_58 = Sketch_1.setCoincident(SketchArc_18.endPoint(), SketchArc_19.startPoint())
SketchLine_31.setAuxiliary(True)
SketchConstraintCoincidence_75 = Sketch_1.setCoincident(SketchArc_1.center(), SketchLine_31.startPoint())
SketchConstraintCoincidence_76 = Sketch_1.setCoincident(SketchLine_31.endPoint(), SketchArc_1.results()[1])
-SketchConstraintAngle_6 = Sketch_1.setAngle(SketchLine_31.result(), SketchLine_3.result(), 59.94)
+SketchConstraintAngle_6 = Sketch_1.setAngle(SketchLine_31.result(), SketchLine_3.result(), 59.93999999988066)
SketchLine_32 = Sketch_1.addLine(1.871489087529827, 3.334796428456965, 1.871489087529827, 3.598813126524882)
SketchLine_32.setName("SketchLine_33")
SketchLine_32.result().setName("SketchLine_33")
SketchConstraintCoincidence_81 = Sketch_1.setCoincident(SketchLine_33.startPoint(), SketchLine_32.result())
SketchConstraintVertical_7 = Sketch_1.setVertical(SketchLine_33.result())
model.do()
-Extrusion_1_objects = [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1r-SketchLine_2f-SketchArc_1_2r-SketchLine_5f-SketchArc_11_2f-SketchLine_14r-SketchLine_15f-SketchLine_16r-SketchArc_9_2f-SketchArc_15_2r-SketchLine_33f-SketchLine_34r"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2r-SketchArc_2_2r-SketchArc_3_2r-SketchLine_11f-SketchArc_4_2r-SketchArc_5_2r-SketchArc_12_2f-SketchArc_13_2f-SketchArc_10_2f-SketchArc_14_2f-SketchArc_16_2r-SketchLine_29f-SketchLine_30r"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_20f-SketchArc_17_2r-SketchLine_21r-SketchArc_20_2r-SketchLine_22r-SketchLine_23r-SketchArc_23_2f-SketchLine_24f-SketchArc_27_2f-SketchLine_25f-SketchLine_33f-SketchLine_34r"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_18_2r-SketchArc_19_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_28_2f-SketchLine_28f-SketchLine_31f"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_17_2r-SketchArc_23_2f-SketchLine_28r-SketchLine_33r"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2r-SketchArc_11_2f-SketchLine_29r-SketchLine_33r"), model.selection("FACE", "Sketch_1/Face-SketchArc_9_2f-SketchArc_15_2r-SketchLine_30f-SketchLine_34f"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_20_2r-SketchArc_27_2f-SketchLine_31r-SketchLine_34f")]
+Extrusion_1_objects = [model.selection("WIRE", "Sketch_1/Face-SketchLine_5f-SketchArc_1_2r-SketchLine_33f-SketchArc_11_2f-SketchLine_2f-SketchLine_14r-SketchArc_9_2f-SketchLine_34r-SketchArc_15_2r-SketchLine_16r-SketchLine_15f-SketchLine_1r_wire"), model.selection("WIRE", "Sketch_1/Face-SketchArc_2_2r-SketchArc_3_2r-SketchLine_11f-SketchArc_4_2r-SketchArc_5_2r-SketchArc_16_2r-SketchLine_30r-SketchArc_10_2f-SketchArc_14_2f-SketchArc_13_2f-SketchArc_12_2f-SketchLine_29f-SketchArc_1_2r_wire"), model.selection("WIRE", "Sketch_1/Face-SketchLine_20f-SketchArc_17_2r-SketchLine_33f-SketchArc_23_2f-SketchLine_23r-SketchLine_22r-SketchLine_24f-SketchLine_25f-SketchArc_27_2f-SketchLine_34r-SketchArc_20_2r-SketchLine_21r_wire"), model.selection("WIRE", "Sketch_1/Face-SketchArc_19_2r-SketchArc_22_2r-SketchArc_21_2r-SketchLine_31f-SketchArc_28_2f-SketchArc_26_2f-SketchArc_25_2f-SketchArc_24_2f-SketchLine_28f-SketchArc_18_2r_wire"), model.selection("WIRE", "Sketch_1/Face-SketchLine_28r-SketchArc_23_2f-SketchLine_33r-SketchArc_17_2r_wire"), model.selection("WIRE", "Sketch_1/Face-SketchLine_29r-SketchArc_11_2f-SketchLine_33r-SketchArc_1_2r_wire"), model.selection("FACE", "Sketch_1/Face-SketchArc_9_2f-SketchLine_30f-SketchArc_15_2r-SketchLine_34f"), model.selection("WIRE", "Sketch_1/Face-SketchLine_34f-SketchArc_27_2f-SketchLine_31r-SketchArc_20_2r_wire")]
Extrusion_1 = model.addExtrusion(Part_1_doc, Extrusion_1_objects, model.selection(), 0.1785, 0.1785)
-Extrusion_2_objects = [model.selection("WIRE", "Sketch_1/Wire-SketchArc_12_2r-SketchArc_13_2r-SketchArc_10_2r-SketchArc_14_2r-SketchArc_18_2f-SketchArc_19_2f-SketchArc_21_2f-SketchArc_22_2f-SketchLine_26f-SketchLine_27r"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2r-SketchArc_2_2r-SketchArc_3_2r-SketchLine_11f-SketchArc_4_2r-SketchArc_5_2r-SketchArc_12_2f-SketchArc_13_2f-SketchArc_10_2f-SketchArc_14_2f-SketchArc_16_2r-SketchLine_29f-SketchLine_30r"), model.selection("FACE", "Sketch_1/Face-SketchArc_18_2r-SketchArc_19_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_28_2f-SketchLine_28f-SketchLine_31f")]
-Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), model.selection("FACE", "Extrusion_1_2/From_Face_2"), -0.05, model.selection("FACE", "Extrusion_1_2/From_Face_2"), 0)
-Extrusion_3_objects = [model.selection("FACE", "Sketch_1/Face-SketchArc_12_2r-SketchArc_13_2r-SketchArc_10_2r-SketchArc_14_2r-SketchArc_18_2f-SketchArc_19_2f-SketchArc_21_2f-SketchArc_22_2f-SketchLine_26f-SketchLine_27r"), model.selection("FACE", "Sketch_1/Face-SketchArc_18_2r-SketchArc_19_2r-SketchArc_21_2r-SketchArc_22_2r-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_28_2f-SketchLine_28f-SketchLine_31f"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2r-SketchArc_2_2r-SketchArc_3_2r-SketchLine_11f-SketchArc_4_2r-SketchArc_5_2r-SketchArc_12_2f-SketchArc_13_2f-SketchArc_10_2f-SketchArc_14_2f-SketchArc_16_2r-SketchLine_29f-SketchLine_30r")]
-Extrusion_3 = model.addExtrusion(Part_1_doc, Extrusion_3_objects, model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0.05, model.selection("FACE", "Extrusion_1_2/To_Face_1"), 0)
-Extrusion_4_objects = [model.selection("FACE", "Sketch_1/Face-SketchArc_17_2r-SketchArc_23_2f-SketchLine_28r-SketchLine_33r"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_1_2r-SketchArc_11_2f-SketchLine_29r-SketchLine_33r"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_11_2r-SketchArc_17_2f-SketchLine_27f-SketchLine_33r"), model.selection("FACE", "Sketch_1/Face-SketchArc_20_2r-SketchArc_27_2f-SketchLine_31r-SketchLine_34f"), model.selection("FACE", "Sketch_1/Face-SketchArc_9_2r-SketchArc_20_2f-SketchLine_26r-SketchLine_34f"), model.selection("WIRE", "Sketch_1/Wire-SketchArc_9_2f-SketchArc_15_2r-SketchLine_30f-SketchLine_34f")]
-Extrusion_4 = model.addExtrusion(Part_1_doc, Extrusion_4_objects, model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_2"), 0.15, model.selection("FACE", "Extrusion_1_1/To_Face_2"), 0)
+Extrusion_2_objects = [model.selection("WIRE", "Sketch_1/Face-SketchArc_13_2r-SketchArc_14_2r-SketchArc_10_2r-SketchLine_26f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_19_2f-SketchArc_18_2f-SketchLine_27r-SketchArc_12_2r_wire"), model.selection("WIRE", "Sketch_1/Face-SketchArc_2_2r-SketchArc_3_2r-SketchLine_11f-SketchArc_4_2r-SketchArc_5_2r-SketchArc_16_2r-SketchLine_30r-SketchArc_10_2f-SketchArc_14_2f-SketchArc_13_2f-SketchArc_12_2f-SketchLine_29f-SketchArc_1_2r_wire"), model.selection("FACE", "Sketch_1/Face-SketchArc_19_2r-SketchArc_22_2r-SketchArc_21_2r-SketchLine_31f-SketchArc_28_2f-SketchArc_26_2f-SketchArc_25_2f-SketchArc_24_2f-SketchLine_28f-SketchArc_18_2r")]
+Extrusion_2 = model.addExtrusion(Part_1_doc, Extrusion_2_objects, model.selection(), model.selection("FACE", "Extrusion_1_2_2/From_Face"), -0.05, model.selection("FACE", "Extrusion_1_2_2/From_Face"), 0)
+Extrusion_3_objects = [model.selection("FACE", "Sketch_1/Face-SketchArc_13_2r-SketchArc_14_2r-SketchArc_10_2r-SketchLine_26f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_19_2f-SketchArc_18_2f-SketchLine_27r-SketchArc_12_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_19_2r-SketchArc_22_2r-SketchArc_21_2r-SketchLine_31f-SketchArc_28_2f-SketchArc_26_2f-SketchArc_25_2f-SketchArc_24_2f-SketchLine_28f-SketchArc_18_2r"), model.selection("WIRE", "Sketch_1/Face-SketchArc_2_2r-SketchArc_3_2r-SketchLine_11f-SketchArc_4_2r-SketchArc_5_2r-SketchArc_16_2r-SketchLine_30r-SketchArc_10_2f-SketchArc_14_2f-SketchArc_13_2f-SketchArc_12_2f-SketchLine_29f-SketchArc_1_2r_wire")]
+Extrusion_3 = model.addExtrusion(Part_1_doc, Extrusion_3_objects, model.selection(), model.selection("FACE", "Extrusion_1_1_1/To_Face"), 0.05, model.selection("FACE", "Extrusion_1_2_1/To_Face"), 0)
+Extrusion_4_objects = [model.selection("FACE", "Sketch_1/Face-SketchLine_28r-SketchArc_23_2f-SketchLine_33r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_1/Face-SketchLine_29r-SketchArc_11_2f-SketchLine_33r-SketchArc_1_2r_wire"), model.selection("WIRE", "Sketch_1/Face-SketchLine_27f-SketchArc_17_2f-SketchLine_33r-SketchArc_11_2r_wire"), model.selection("FACE", "Sketch_1/Face-SketchLine_34f-SketchArc_27_2f-SketchLine_31r-SketchArc_20_2r"), model.selection("FACE", "Sketch_1/Face-SketchLine_34f-SketchArc_20_2f-SketchLine_26r-SketchArc_9_2r"), model.selection("WIRE", "Sketch_1/Face-SketchArc_9_2f-SketchLine_30f-SketchArc_15_2r-SketchLine_34f_wire")]
+Extrusion_4 = model.addExtrusion(Part_1_doc, Extrusion_4_objects, model.selection(), model.selection("FACE", "Extrusion_1_1_2/To_Face"), 0.15, model.selection("FACE", "Extrusion_1_1_2/To_Face"), 0)
Extrusion_4.setName("Extrusion_6")
Extrusion_4.result().setName("Extrusion_6_1")
Extrusion_4.result().subResult(0).setName("Extrusion_6_1_1")
Extrusion_4.results()[1].subResult(0).setName("Extrusion_6_2_1")
Extrusion_4.results()[1].subResult(1).setName("Extrusion_6_2_2")
Extrusion_4.results()[1].subResult(2).setName("Extrusion_6_2_3")
-Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "Extrusion_3_1/To_Face_3&Extrusion_3_1/Generated_Face_10&Extrusion_3_1/Generated_Face_11"), model.selection("VERTEX", "Extrusion_6_1/To_Face_1&Extrusion_6_1/Generated_Face_9&Extrusion_6_1/Generated_Face_8"))
-Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Extrusion_6_1/Generated_Face_3&Extrusion_6_1/To_Face_3&Extrusion_6_1/Generated_Face_4"), False)
+Axis_4 = model.addAxis(Part_1_doc, model.selection("VERTEX", "[Extrusion_3_1_3/To_Face][Extrusion_3_1_3/Generated_Face&Sketch_1/SketchLine_28][Extrusion_3_1_3/Generated_Face&Sketch_1/SketchArc_24_2]"), model.selection("VERTEX", "[Extrusion_6_1_1/To_Face][Extrusion_6_1_1/Generated_Face&Sketch_1/SketchArc_23_2][Extrusion_6_1_1/Generated_Face&Sketch_1/SketchLine_33]"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "[Extrusion_6_1_3/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_6_1_3/To_Face][Extrusion_6_1_3/Generated_Face&Sketch_1/SketchLine_33]"), False)
Partition_1_objects = [model.selection("COMPSOLID", "Extrusion_6_1"), model.selection("FACE", "Plane_1"), model.selection("COMPSOLID", "Extrusion_6_2")]
Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
model.do()
