-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
from salome.shaper import model
model.do()
Part_1 = model.addPart(partSet)
Part_1_doc = Part_1.document()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1/Face-SketchCircle_1_2r-SketchCircle_2_2f")], model.selection(), 5, 0)
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1/Face-SketchCircle_2_2f-SketchCircle_1_2r")], model.selection(), 5, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.standardPlane("YOZ"))
SketchCircle_3 = Sketch_2.addCircle(-0.01730125245914903, 1.175069067120482, 0.2787321880802174)
SketchCircle_4 = Sketch_2.addCircle(-0.01730125245914903, 1.175069067120482, 0.3197841740766353)
SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchCircle_3.center(), SketchCircle_4.center())
model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_1_2r-SketchCircle_2_2f")], model.selection(), 0, 3)
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0)
-Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], [model.selection("SOLID", "Extrusion_3_1")])
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOZ"))
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_2_2f-SketchCircle_1_2r")], model.selection(), 0, 3)
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "PartSet/Sketch_1/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face"), 0, model.selection(), 0)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_2_1")], [model.selection("SOLID", "Extrusion_3_1")])
+Sketch_3 = model.addSketch(Part_1_doc, model.standardPlane("XOZ"))
SketchLine_1 = Sketch_3.addLine(-3.362323990279312, -0.5188129046480872, 0.8318943090987101, -0.5188129046480872)
SketchLine_2 = Sketch_3.addLine(0.8318943090987101, -0.5188129046480872, 0.8318943090987101, 7.155729512171993)
SketchLine_3 = Sketch_3.addLine(0.8318943090987101, 7.155729512171993, -3.362323990279312, 7.155729512171993)
SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_3.result())
SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_4.result())
model.do()
-Face_1 = model.addFace(Part_1_doc, [model.selection("EDGE", "Sketch_2/Edge-SketchLine_2"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_3"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_4"), model.selection("EDGE", "Sketch_2/Edge-SketchLine_1")])
-Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_2_1/From_Face_1"), 0, model.selection(), 0)
-Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_4_1")])
-Partition_1 = model.addPartition(Part_1_doc, [model.selection("SOLID", "Boolean_1_1"), model.selection("SOLID", "Boolean_2_1"), model.selection("FACE", "Face_1_1")])
+Face_1_objects = [model.selection("EDGE", "Sketch_2/SketchLine_2"), model.selection("EDGE", "Sketch_2/SketchLine_3"), model.selection("EDGE", "Sketch_2/SketchLine_4"), model.selection("EDGE", "Sketch_2/SketchLine_1")]
+Face_1 = model.addFace(Part_1_doc, Face_1_objects)
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchCircle_2_2f-SketchCircle_1_2r_wire")], model.selection(), model.selection("FACE", "Extrusion_2_1/From_Face"), 0, model.selection(), 0)
+Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_4_1")])
+Partition_1_objects = [model.selection("SOLID", "Cut_1_1"), model.selection("SOLID", "Cut_2_1"), model.selection("FACE", "Face_1_1")]
+Partition_1 = model.addPartition(Part_1_doc, Partition_1_objects)
+Remove_SubShapes_1_objects_1 = [model.selection("SOLID", "Partition_1_1_1_1"), model.selection("SOLID", "Partition_1_1_1_2"), model.selection("SOLID", "Partition_1_1_1_3"), model.selection("SOLID", "Partition_1_1_1_4")]
Remove_SubShapes_1 = model.addRemoveSubShapes(Part_1_doc, model.selection("COMPOUND", "Partition_1_1"))
-Remove_SubShapes_1.setSubShapesToKeep([model.selection("COMPSOLID", "Partition_1_1_1"), model.selection("FACE", "Partition_1_1_3"), model.selection("FACE", "Partition_1_1_4"), model.selection("FACE", "Partition_1_1_5"), model.selection("FACE", "Partition_1_1_6"), model.selection("FACE", "Partition_1_1_7")])
+Remove_SubShapes_1.setSubShapesToKeep(Remove_SubShapes_1_objects_1)
+model.do()
model.end()
-
# check that remove sub-shapes contains correct selection
from ModelAPI import *
aFactory = ModelAPI_Session.get().validators()
assert(aFactory.validate(Remove_SubShapes_1.feature()))
-assert(Remove_SubShapes_1.subshapes().size() == 6)
-assert(Remove_SubShapes_1.subshapes().value(0).namingName() == "Partition_1_1_1")
-assert(Remove_SubShapes_1.subshapes().value(1).namingName() == "Partition_1_1_3")
-assert(Remove_SubShapes_1.subshapes().value(2).namingName() == "Partition_1_1_4")
-assert(Remove_SubShapes_1.subshapes().value(3).namingName() == "Partition_1_1_5")
-assert(Remove_SubShapes_1.subshapes().value(4).namingName() == "Partition_1_1_6")
-assert(Remove_SubShapes_1.subshapes().value(5).namingName() == "Partition_1_1_7")
+assert(Remove_SubShapes_1.subshapesToKeep().size() == 4)
+assert(Remove_SubShapes_1.subshapesToKeep().value(0).namingName() == "Partition_1_1_1_1")
+assert(Remove_SubShapes_1.subshapesToKeep().value(1).namingName() == "Partition_1_1_1_2")
+assert(Remove_SubShapes_1.subshapesToKeep().value(2).namingName() == "Partition_1_1_1_3")
+assert(Remove_SubShapes_1.subshapesToKeep().value(3).namingName() == "Partition_1_1_1_4")
+assert(Remove_SubShapes_1.subshapesToRemove().size() == 1)
+assert(Remove_SubShapes_1.subshapesToRemove().value(0).namingName() == "Partition_1_1_2")
